1442 lines
35 KiB
C
1442 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* lt6911c HDMI to MIPI CSI-2 bridge driver.
|
|
*
|
|
* Author: Jianwei Fan <jianwei.fan@rock-chips.com>
|
|
*
|
|
* V0.0X01.0X00 first version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/hdmi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/rk-camera-module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/v4l2-dv-timings.h>
|
|
#include <linux/version.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/compat.h>
|
|
#include <media/v4l2-controls_rockchip.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-dv-timings.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x00)
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "debug level (0-3)");
|
|
|
|
#define I2C_MAX_XFER_SIZE 128
|
|
#define POLL_INTERVAL_MS 1000
|
|
|
|
#define LT6911C_LINK_FREQ 400000000
|
|
#define LT6911C_PIXEL_RATE 400000000
|
|
|
|
#define LT6911C_CHIPID 0x0516
|
|
#define CHIPID_REGH 0xA001
|
|
#define CHIPID_REGL 0xA000
|
|
#define I2C_EN_REG 0x80EE
|
|
#define I2C_ENABLE 0x1
|
|
#define I2C_DISABLE 0x0
|
|
|
|
#define AD_HALF_PIX_CLK 0x21
|
|
#define SOURCE_DP_RX 0x10
|
|
#define RECEIVED_INT 1
|
|
|
|
#define HTOTAL_H 0xd289
|
|
#define HTOTAL_L 0xd28a
|
|
#define HACT_H 0xd28b
|
|
#define HACT_L 0xd28c
|
|
#define HFP_H 0xd29c
|
|
#define HFP_L 0xd29d
|
|
#define HS_H 0xd294
|
|
#define HS_L 0xd295
|
|
#define HBP_H 0xd298
|
|
#define HBP_L 0xd299
|
|
|
|
#define VTOTAL_H 0xd29e
|
|
#define VTOTAL_L 0xd29f
|
|
#define VACT_H 0xd296
|
|
#define VACT_L 0xd297
|
|
#define VBP 0xd287
|
|
#define VFP 0xd288
|
|
#define VS 0xd286
|
|
|
|
#define FM_CLK_SEL 0xa034
|
|
#define FREQ_METER_H 0xb8b1
|
|
#define FREQ_METER_M 0xb8b2
|
|
#define FREQ_METER_L 0xb8b3
|
|
#define RG_MK_PRESET_SEL 0xd283
|
|
|
|
#define STREAM_CTL 0x900a
|
|
#define ENABLE_STREAM 0xbf
|
|
#define DISABLE_STREAM 0xbe
|
|
|
|
#define LT6911C_NAME "LT6911C"
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
LT6911C_LINK_FREQ,
|
|
};
|
|
|
|
struct lt6911c_state {
|
|
struct v4l2_mbus_config_mipi_csi2 bus;
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct i2c_client *i2c_client;
|
|
struct mutex confctl_mutex;
|
|
struct v4l2_ctrl *detect_tx_5v_ctrl;
|
|
struct v4l2_ctrl *audio_sampling_rate_ctrl;
|
|
struct v4l2_ctrl *audio_present_ctrl;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct delayed_work delayed_work_enable_hotplug;
|
|
struct delayed_work delayed_work_res_change;
|
|
struct v4l2_dv_timings timings;
|
|
struct clk *xvclk;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *plugin_det_gpio;
|
|
struct gpio_desc *hpd_ctl_gpio;
|
|
struct gpio_desc *power_gpio;
|
|
struct work_struct work_i2c_poll;
|
|
struct timer_list timer;
|
|
const char *module_facing;
|
|
const char *module_name;
|
|
const char *len_name;
|
|
const struct lt6911c_mode *cur_mode;
|
|
bool nosignal;
|
|
bool enable_hdcp;
|
|
bool is_audio_present;
|
|
int plugin_irq;
|
|
u32 mbus_fmt_code;
|
|
u8 csi_lanes_in_use;
|
|
u32 module_index;
|
|
u32 audio_sampling_rate;
|
|
};
|
|
|
|
static const struct v4l2_dv_timings_cap lt6911c_timings_cap = {
|
|
.type = V4L2_DV_BT_656_1120,
|
|
.reserved = { 0 },
|
|
V4L2_INIT_BT_TIMINGS(1, 10000, 1, 10000, 0, 400000000,
|
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
|
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_INTERLACED |
|
|
V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
|
V4L2_DV_BT_CAP_CUSTOM)
|
|
};
|
|
|
|
struct lt6911c_mode {
|
|
u32 width;
|
|
u32 height;
|
|
struct v4l2_fract max_fps;
|
|
u32 hts_def;
|
|
u32 vts_def;
|
|
u32 exp_def;
|
|
};
|
|
|
|
static const struct lt6911c_mode supported_modes[] = {
|
|
{
|
|
.width = 1920,
|
|
.height = 1080,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 600000,
|
|
},
|
|
.hts_def = 2200,
|
|
.vts_def = 1125,
|
|
}, {
|
|
.width = 1280,
|
|
.height = 720,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 600000,
|
|
},
|
|
.hts_def = 1650,
|
|
.vts_def = 750,
|
|
}, {
|
|
.width = 720,
|
|
.height = 576,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 500000,
|
|
},
|
|
.hts_def = 864,
|
|
.vts_def = 625,
|
|
}, {
|
|
.width = 720,
|
|
.height = 480,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 600000,
|
|
},
|
|
.hts_def = 858,
|
|
.vts_def = 525,
|
|
},
|
|
};
|
|
|
|
static void lt6911c_format_change(struct v4l2_subdev *sd);
|
|
static int lt6911c_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd);
|
|
static int lt6911c_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings);
|
|
|
|
static inline struct lt6911c_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct lt6911c_state, sd);
|
|
}
|
|
|
|
static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
struct i2c_client *client = lt6911c->i2c_client;
|
|
int err;
|
|
u8 buf[2] = { 0xFF, reg >> 8};
|
|
u8 reg_addr = reg & 0xFF;
|
|
struct i2c_msg msgs[3];
|
|
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 2;
|
|
msgs[0].buf = buf;
|
|
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = 0;
|
|
msgs[1].len = 1;
|
|
msgs[1].buf = ®_addr;
|
|
|
|
msgs[2].addr = client->addr;
|
|
msgs[2].flags = I2C_M_RD;
|
|
msgs[2].len = n;
|
|
msgs[2].buf = values;
|
|
|
|
err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (err != ARRAY_SIZE(msgs)) {
|
|
v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed\n",
|
|
__func__, reg, client->addr);
|
|
}
|
|
|
|
if (!debug)
|
|
return;
|
|
|
|
switch (n) {
|
|
case 1:
|
|
v4l2_info(sd, "I2C read 0x%04x = 0x%02x\n",
|
|
reg, values[0]);
|
|
break;
|
|
case 2:
|
|
v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x\n",
|
|
reg, values[1], values[0]);
|
|
break;
|
|
case 4:
|
|
v4l2_info(sd, "I2C read 0x%04x = 0x%02x%02x%02x%02x\n",
|
|
reg, values[3], values[2], values[1], values[0]);
|
|
break;
|
|
default:
|
|
v4l2_info(sd, "I2C read %d bytes from address 0x%04x\n",
|
|
n, reg);
|
|
}
|
|
}
|
|
|
|
static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
struct i2c_client *client = lt6911c->i2c_client;
|
|
int err, i;
|
|
struct i2c_msg msgs[2];
|
|
u8 data[I2C_MAX_XFER_SIZE];
|
|
u8 buf[2] = { 0xFF, reg >> 8};
|
|
|
|
if ((1 + n) > I2C_MAX_XFER_SIZE) {
|
|
n = I2C_MAX_XFER_SIZE - 1;
|
|
v4l2_warn(sd, "i2c wr reg=%04x: len=%d is too big!\n",
|
|
reg, 1 + n);
|
|
}
|
|
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 2;
|
|
msgs[0].buf = buf;
|
|
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = 0;
|
|
msgs[1].len = 1 + n;
|
|
msgs[1].buf = data;
|
|
|
|
data[0] = reg & 0xff;
|
|
for (i = 0; i < n; i++)
|
|
data[1 + i] = values[i];
|
|
|
|
err = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (err < 0) {
|
|
v4l2_err(sd, "%s: writing register 0x%x from 0x%x failed\n",
|
|
__func__, reg, client->addr);
|
|
return;
|
|
}
|
|
|
|
if (!debug)
|
|
return;
|
|
|
|
switch (n) {
|
|
case 1:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x\n",
|
|
reg, data[1]);
|
|
break;
|
|
case 2:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x\n",
|
|
reg, data[2], data[1]);
|
|
break;
|
|
case 4:
|
|
v4l2_info(sd, "I2C write 0x%04x = 0x%02x%02x%02x%02x\n",
|
|
reg, data[4], data[3], data[2], data[1]);
|
|
break;
|
|
default:
|
|
v4l2_info(sd, "I2C write %d bytes from address 0x%04x\n",
|
|
n, reg);
|
|
}
|
|
}
|
|
|
|
static u8 i2c_rd8(struct v4l2_subdev *sd, u16 reg)
|
|
{
|
|
u32 val;
|
|
|
|
i2c_rd(sd, reg, (u8 __force *)&val, 1);
|
|
return val;
|
|
}
|
|
|
|
static void i2c_wr8(struct v4l2_subdev *sd, u16 reg, u8 val)
|
|
{
|
|
i2c_wr(sd, reg, &val, 1);
|
|
}
|
|
|
|
static void lt6911c_i2c_enable(struct v4l2_subdev *sd)
|
|
{
|
|
i2c_wr8(sd, I2C_EN_REG, I2C_ENABLE);
|
|
}
|
|
|
|
static void lt6911c_i2c_disable(struct v4l2_subdev *sd)
|
|
{
|
|
i2c_wr8(sd, I2C_EN_REG, I2C_DISABLE);
|
|
}
|
|
|
|
static inline bool tx_5v_power_present(struct v4l2_subdev *sd)
|
|
{
|
|
bool ret;
|
|
int val, i, cnt;
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
/* if not use plugin det gpio */
|
|
if (!lt6911c->plugin_det_gpio)
|
|
return true;
|
|
|
|
cnt = 0;
|
|
for (i = 0; i < 5; i++) {
|
|
val = gpiod_get_value(lt6911c->plugin_det_gpio);
|
|
if (val > 0)
|
|
cnt++;
|
|
usleep_range(500, 600);
|
|
}
|
|
|
|
ret = (cnt >= 3) ? true : false;
|
|
v4l2_dbg(1, debug, sd, "%s: %d\n", __func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline bool no_signal(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s no signal:%d\n", __func__,
|
|
lt6911c->nosignal);
|
|
|
|
return lt6911c->nosignal;
|
|
}
|
|
|
|
static inline bool audio_present(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
return lt6911c->is_audio_present;
|
|
}
|
|
|
|
static int get_audio_sampling_rate(struct v4l2_subdev *sd)
|
|
{
|
|
static const int code_to_rate[] = {
|
|
44100, 0, 48000, 32000, 22050, 384000, 24000, 352800,
|
|
88200, 768000, 96000, 705600, 176400, 0, 192000, 0
|
|
};
|
|
|
|
if (no_signal(sd))
|
|
return 0;
|
|
|
|
return code_to_rate[2];
|
|
}
|
|
|
|
static inline unsigned int fps_calc(const struct v4l2_bt_timings *t)
|
|
{
|
|
if (!V4L2_DV_BT_FRAME_HEIGHT(t) || !V4L2_DV_BT_FRAME_WIDTH(t))
|
|
return 0;
|
|
|
|
return DIV_ROUND_CLOSEST((unsigned int)t->pixelclock,
|
|
V4L2_DV_BT_FRAME_HEIGHT(t) * V4L2_DV_BT_FRAME_WIDTH(t));
|
|
}
|
|
|
|
static bool lt6911c_rcv_supported_res(struct v4l2_subdev *sd, u32 width,
|
|
u32 height)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
|
|
if ((supported_modes[i].width == width) &&
|
|
(supported_modes[i].height == height)) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(supported_modes)) {
|
|
v4l2_err(sd, "%s do not support res wxh: %dx%d\n", __func__,
|
|
width, height);
|
|
return false;
|
|
} else {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static int lt6911c_get_detected_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
struct v4l2_bt_timings *bt = &timings->bt;
|
|
u32 hact, vact, htotal, vtotal;
|
|
u32 hbp, hs, hfp, vbp, vs, vfp;
|
|
u32 pixel_clock, fps, halt_pix_clk;
|
|
u8 clk_h, clk_m, clk_l;
|
|
u8 value, val_h, val_l;
|
|
|
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
|
|
|
lt6911c_i2c_enable(sd);
|
|
i2c_wr8(sd, FM_CLK_SEL, AD_HALF_PIX_CLK);
|
|
mdelay(10);
|
|
clk_h = i2c_rd8(sd, FREQ_METER_H);
|
|
clk_m = i2c_rd8(sd, FREQ_METER_M);
|
|
clk_l = i2c_rd8(sd, FREQ_METER_L);
|
|
halt_pix_clk = (((clk_h & 0xf) << 16) | (clk_m << 8) | clk_l);
|
|
pixel_clock = halt_pix_clk * 2 * 1000;
|
|
|
|
i2c_wr8(sd, RG_MK_PRESET_SEL, SOURCE_DP_RX);
|
|
mdelay(10);
|
|
val_h = i2c_rd8(sd, HTOTAL_H);
|
|
val_l = i2c_rd8(sd, HTOTAL_L);
|
|
htotal = ((val_h << 8) | val_l) * 2;
|
|
val_h = i2c_rd8(sd, VTOTAL_H);
|
|
val_l = i2c_rd8(sd, VTOTAL_L);
|
|
vtotal = (val_h << 8) | val_l;
|
|
val_h = i2c_rd8(sd, HACT_H);
|
|
val_l = i2c_rd8(sd, HACT_L);
|
|
hact = ((val_h << 8) | val_l) * 2;
|
|
val_h = i2c_rd8(sd, VACT_H);
|
|
val_l = i2c_rd8(sd, VACT_L);
|
|
vact = (val_h << 8) | val_l;
|
|
val_h = i2c_rd8(sd, HS_H);
|
|
val_l = i2c_rd8(sd, HS_L);
|
|
hs = ((val_h << 8) | val_l) * 2;
|
|
value = i2c_rd8(sd, VS);
|
|
vs = value;
|
|
val_h = i2c_rd8(sd, HFP_H);
|
|
val_l = i2c_rd8(sd, HFP_L);
|
|
hfp = ((val_h << 8) | val_l) * 2;
|
|
value = i2c_rd8(sd, VFP);
|
|
vfp = value;
|
|
val_h = i2c_rd8(sd, HBP_H);
|
|
val_l = i2c_rd8(sd, HBP_L);
|
|
hbp = ((val_h << 8) | val_l) * 2;
|
|
value = i2c_rd8(sd, VBP);
|
|
vbp = value;
|
|
|
|
lt6911c_i2c_disable(sd);
|
|
|
|
if (!lt6911c_rcv_supported_res(sd, hact, vact)) {
|
|
lt6911c->nosignal = true;
|
|
v4l2_err(sd, "%s: rcv err res, return no signal!\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt6911c->nosignal = false;
|
|
lt6911c->is_audio_present = true;
|
|
timings->type = V4L2_DV_BT_656_1120;
|
|
bt->interlaced = V4L2_DV_PROGRESSIVE;
|
|
bt->width = hact;
|
|
bt->height = vact;
|
|
bt->vsync = vs;
|
|
bt->hsync = hs;
|
|
bt->pixelclock = pixel_clock;
|
|
bt->hfrontporch = hfp;
|
|
bt->vfrontporch = vfp;
|
|
bt->hbackporch = hbp;
|
|
bt->vbackporch = vbp;
|
|
fps = fps_calc(bt);
|
|
|
|
v4l2_info(sd, "act:%dx%d, total:%dx%d, pixclk:%d, fps:%d\n",
|
|
hact, vact, htotal, vtotal, pixel_clock, fps);
|
|
v4l2_info(sd, "hfp:%d, hs:%d, hbp:%d, vfp:%d, vs:%d, vbp:%d\n",
|
|
bt->hfrontporch, bt->hsync, bt->hbackporch,
|
|
bt->vfrontporch, bt->vsync, bt->vbackporch);
|
|
v4l2_info(sd, "inerlaced:%d,\n", bt->interlaced);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lt6911c_config_hpd(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
bool plugin;
|
|
|
|
plugin = tx_5v_power_present(sd);
|
|
v4l2_dbg(2, debug, sd, "%s: plugin: %d\n", __func__, plugin);
|
|
|
|
if (plugin) {
|
|
gpiod_set_value(lt6911c->hpd_ctl_gpio, 1);
|
|
} else {
|
|
lt6911c->nosignal = true;
|
|
gpiod_set_value(lt6911c->hpd_ctl_gpio, 0);
|
|
}
|
|
}
|
|
|
|
static void lt6911c_delayed_work_enable_hotplug(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct lt6911c_state *lt6911c = container_of(dwork,
|
|
struct lt6911c_state, delayed_work_enable_hotplug);
|
|
struct v4l2_subdev *sd = <6911c->sd;
|
|
|
|
lt6911c_s_ctrl_detect_tx_5v(sd);
|
|
}
|
|
|
|
static void lt6911c_delayed_work_res_change(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct lt6911c_state *lt6911c = container_of(dwork,
|
|
struct lt6911c_state, delayed_work_res_change);
|
|
struct v4l2_subdev *sd = <6911c->sd;
|
|
|
|
lt6911c_format_change(sd);
|
|
}
|
|
|
|
static int lt6911c_s_ctrl_detect_tx_5v(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(lt6911c->detect_tx_5v_ctrl,
|
|
tx_5v_power_present(sd));
|
|
}
|
|
|
|
static int lt6911c_s_ctrl_audio_sampling_rate(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(lt6911c->audio_sampling_rate_ctrl,
|
|
get_audio_sampling_rate(sd));
|
|
}
|
|
|
|
static int lt6911c_s_ctrl_audio_present(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
return v4l2_ctrl_s_ctrl(lt6911c->audio_present_ctrl,
|
|
audio_present(sd));
|
|
}
|
|
|
|
static int lt6911c_update_controls(struct v4l2_subdev *sd)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret |= lt6911c_s_ctrl_detect_tx_5v(sd);
|
|
ret |= lt6911c_s_ctrl_audio_sampling_rate(sd);
|
|
ret |= lt6911c_s_ctrl_audio_present(sd);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void enable_stream(struct v4l2_subdev *sd, bool enable)
|
|
{
|
|
v4l2_dbg(2, debug, sd, "%s: %sable\n",
|
|
__func__, enable ? "en" : "dis");
|
|
}
|
|
|
|
static void lt6911c_format_change(struct v4l2_subdev *sd)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
struct v4l2_dv_timings timings;
|
|
const struct v4l2_event lt6911c_ev_fmt = {
|
|
.type = V4L2_EVENT_SOURCE_CHANGE,
|
|
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
|
|
};
|
|
|
|
if (lt6911c_get_detected_timings(sd, &timings)) {
|
|
enable_stream(sd, false);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: No signal\n", __func__);
|
|
} else {
|
|
if (!v4l2_match_dv_timings(<6911c->timings, &timings, 0, false)) {
|
|
enable_stream(sd, false);
|
|
/* automatically set timing rather than set by user */
|
|
lt6911c_s_dv_timings(sd, &timings);
|
|
v4l2_print_dv_timings(sd->name,
|
|
"Format_change: New format: ",
|
|
&timings, false);
|
|
}
|
|
}
|
|
|
|
if (sd->devnode)
|
|
v4l2_subdev_notify_event(sd, <6911c_ev_fmt);
|
|
}
|
|
|
|
static int lt6911c_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
schedule_delayed_work(<6911c->delayed_work_res_change, HZ / 20);
|
|
*handled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t lt6911c_res_change_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct lt6911c_state *lt6911c = dev_id;
|
|
bool handled;
|
|
|
|
lt6911c_isr(<6911c->sd, 0, &handled);
|
|
|
|
return handled ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t plugin_detect_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct lt6911c_state *lt6911c = dev_id;
|
|
struct v4l2_subdev *sd = <6911c->sd;
|
|
|
|
/* control hpd output level after 25ms */
|
|
schedule_delayed_work(<6911c->delayed_work_enable_hotplug,
|
|
HZ / 40);
|
|
tx_5v_power_present(sd);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void lt6911c_irq_poll_timer(struct timer_list *t)
|
|
{
|
|
struct lt6911c_state *lt6911c = from_timer(lt6911c, t, timer);
|
|
|
|
schedule_work(<6911c->work_i2c_poll);
|
|
mod_timer(<6911c->timer, jiffies + msecs_to_jiffies(POLL_INTERVAL_MS));
|
|
}
|
|
|
|
static void lt6911c_work_i2c_poll(struct work_struct *work)
|
|
{
|
|
struct lt6911c_state *lt6911c = container_of(work,
|
|
struct lt6911c_state, work_i2c_poll);
|
|
struct v4l2_subdev *sd = <6911c->sd;
|
|
|
|
lt6911c_format_change(sd);
|
|
}
|
|
|
|
static int lt6911c_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh,
|
|
struct v4l2_event_subscription *sub)
|
|
{
|
|
switch (sub->type) {
|
|
case V4L2_EVENT_SOURCE_CHANGE:
|
|
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
|
|
case V4L2_EVENT_CTRL:
|
|
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int lt6911c_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
|
{
|
|
*status = 0;
|
|
*status |= no_signal(sd) ? V4L2_IN_ST_NO_SIGNAL : 0;
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: status = 0x%x\n", __func__, *status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_s_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
if (!timings)
|
|
return -EINVAL;
|
|
|
|
if (debug)
|
|
v4l2_print_dv_timings(sd->name, "s_dv_timings: ",
|
|
timings, false);
|
|
|
|
if (v4l2_match_dv_timings(<6911c->timings, timings, 0, false)) {
|
|
v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (!v4l2_valid_dv_timings(timings,
|
|
<6911c_timings_cap, NULL, NULL)) {
|
|
v4l2_dbg(1, debug, sd, "%s: timings out of range\n", __func__);
|
|
return -ERANGE;
|
|
}
|
|
|
|
lt6911c->timings = *timings;
|
|
|
|
enable_stream(sd, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_g_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
*timings = lt6911c->timings;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_enum_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_enum_dv_timings *timings)
|
|
{
|
|
if (timings->pad != 0)
|
|
return -EINVAL;
|
|
|
|
return v4l2_enum_dv_timings_cap(timings,
|
|
<6911c_timings_cap, NULL, NULL);
|
|
}
|
|
|
|
static int lt6911c_query_dv_timings(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings *timings)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
*timings = lt6911c->timings;
|
|
if (debug)
|
|
v4l2_print_dv_timings(sd->name,
|
|
"query_dv_timings: ", timings, false);
|
|
|
|
if (!v4l2_valid_dv_timings(timings, <6911c_timings_cap, NULL,
|
|
NULL)) {
|
|
v4l2_dbg(1, debug, sd, "%s: timings out of range\n",
|
|
__func__);
|
|
|
|
return -ERANGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_dv_timings_cap(struct v4l2_subdev *sd,
|
|
struct v4l2_dv_timings_cap *cap)
|
|
{
|
|
if (cap->pad != 0)
|
|
return -EINVAL;
|
|
|
|
*cap = lt6911c_timings_cap;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_g_mbus_config(struct v4l2_subdev *sd,
|
|
unsigned int pad, struct v4l2_mbus_config *cfg)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
cfg->type = V4L2_MBUS_CSI2_DPHY;
|
|
cfg->bus.mipi_csi2 = lt6911c->bus;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_s_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
enable_stream(sd, enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
switch (code->index) {
|
|
case 0:
|
|
code->code = MEDIA_BUS_FMT_UYVY8_2X8;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_enum_frame_sizes(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = supported_modes[fse->index].width;
|
|
fse->max_height = supported_modes[fse->index].height;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
mutex_lock(<6911c->confctl_mutex);
|
|
format->format.code = lt6911c->mbus_fmt_code;
|
|
format->format.width = lt6911c->timings.bt.width;
|
|
format->format.height = lt6911c->timings.bt.height;
|
|
format->format.field =
|
|
lt6911c->timings.bt.interlaced ?
|
|
V4L2_FIELD_INTERLACED : V4L2_FIELD_NONE;
|
|
format->format.colorspace = V4L2_COLORSPACE_SRGB;
|
|
mutex_unlock(<6911c->confctl_mutex);
|
|
|
|
v4l2_dbg(1, debug, sd, "%s: fmt code:%d, w:%d, h:%d, field code:%d\n",
|
|
__func__, format->format.code, format->format.width,
|
|
format->format.height, format->format.field);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_enum_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
if (fie->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fie->code != MEDIA_BUS_FMT_UYVY8_2X8)
|
|
return -EINVAL;
|
|
|
|
fie->width = supported_modes[fie->index].width;
|
|
fie->height = supported_modes[fie->index].height;
|
|
fie->interval = supported_modes[fie->index].max_fps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_get_reso_dist(const struct lt6911c_mode *mode,
|
|
struct v4l2_mbus_framefmt *framefmt)
|
|
{
|
|
return abs(mode->width - framefmt->width) +
|
|
abs(mode->height - framefmt->height);
|
|
}
|
|
|
|
static const struct lt6911c_mode *
|
|
lt6911c_find_best_fit(struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
|
|
int dist;
|
|
int cur_best_fit = 0;
|
|
int cur_best_fit_dist = -1;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
|
|
dist = lt6911c_get_reso_dist(&supported_modes[i], framefmt);
|
|
if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) {
|
|
cur_best_fit_dist = dist;
|
|
cur_best_fit = i;
|
|
}
|
|
}
|
|
|
|
return &supported_modes[cur_best_fit];
|
|
}
|
|
|
|
static int lt6911c_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
const struct lt6911c_mode *mode;
|
|
|
|
/* is overwritten by get_fmt */
|
|
u32 code = format->format.code;
|
|
int ret = lt6911c_get_fmt(sd, sd_state, format);
|
|
|
|
format->format.code = code;
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (code) {
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
return 0;
|
|
|
|
lt6911c->mbus_fmt_code = format->format.code;
|
|
mode = lt6911c_find_best_fit(format);
|
|
lt6911c->cur_mode = mode;
|
|
enable_stream(sd, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lt6911c_g_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
const struct lt6911c_mode *mode = lt6911c->cur_mode;
|
|
|
|
mutex_lock(<6911c->confctl_mutex);
|
|
fi->interval = mode->max_fps;
|
|
mutex_unlock(<6911c->confctl_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void lt6911c_get_module_inf(struct lt6911c_state *lt6911c,
|
|
struct rkmodule_inf *inf)
|
|
{
|
|
memset(inf, 0, sizeof(*inf));
|
|
strscpy(inf->base.sensor, LT6911C_NAME, sizeof(inf->base.sensor));
|
|
strscpy(inf->base.module, lt6911c->module_name, sizeof(inf->base.module));
|
|
strscpy(inf->base.lens, lt6911c->len_name, sizeof(inf->base.lens));
|
|
}
|
|
|
|
static long lt6911c_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
long ret = 0;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
lt6911c_get_module_inf(lt6911c, (struct rkmodule_inf *)arg);
|
|
break;
|
|
case RKMODULE_GET_HDMI_MODE:
|
|
*(int *)arg = RKMODULE_HDMIIN_MODE;
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long lt6911c_compat_ioctl32(struct v4l2_subdev *sd,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *up = compat_ptr(arg);
|
|
struct rkmodule_inf *inf;
|
|
long ret;
|
|
int *seq;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
inf = kzalloc(sizeof(*inf), GFP_KERNEL);
|
|
if (!inf) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = lt6911c_ioctl(sd, cmd, inf);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, inf, sizeof(*inf));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(inf);
|
|
break;
|
|
case RKMODULE_GET_HDMI_MODE:
|
|
seq = kzalloc(sizeof(*seq), GFP_KERNEL);
|
|
if (!seq) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = lt6911c_ioctl(sd, cmd, seq);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, seq, sizeof(*seq));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(seq);
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops lt6911c_core_ops = {
|
|
.interrupt_service_routine = lt6911c_isr,
|
|
.subscribe_event = lt6911c_subscribe_event,
|
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
|
.ioctl = lt6911c_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl32 = lt6911c_compat_ioctl32,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops lt6911c_video_ops = {
|
|
.g_input_status = lt6911c_g_input_status,
|
|
.s_dv_timings = lt6911c_s_dv_timings,
|
|
.g_dv_timings = lt6911c_g_dv_timings,
|
|
.query_dv_timings = lt6911c_query_dv_timings,
|
|
.s_stream = lt6911c_s_stream,
|
|
.g_frame_interval = lt6911c_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops lt6911c_pad_ops = {
|
|
.enum_mbus_code = lt6911c_enum_mbus_code,
|
|
.enum_frame_size = lt6911c_enum_frame_sizes,
|
|
.enum_frame_interval = lt6911c_enum_frame_interval,
|
|
.set_fmt = lt6911c_set_fmt,
|
|
.get_fmt = lt6911c_get_fmt,
|
|
.enum_dv_timings = lt6911c_enum_dv_timings,
|
|
.dv_timings_cap = lt6911c_dv_timings_cap,
|
|
.get_mbus_config = lt6911c_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops lt6911c_ops = {
|
|
.core = <6911c_core_ops,
|
|
.video = <6911c_video_ops,
|
|
.pad = <6911c_pad_ops,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config lt6911c_ctrl_audio_sampling_rate = {
|
|
.id = RK_V4L2_CID_AUDIO_SAMPLING_RATE,
|
|
.name = "Audio sampling rate",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0,
|
|
.max = 768000,
|
|
.step = 1,
|
|
.def = 0,
|
|
.flags = V4L2_CTRL_FLAG_READ_ONLY,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config lt6911c_ctrl_audio_present = {
|
|
.id = RK_V4L2_CID_AUDIO_PRESENT,
|
|
.name = "Audio present",
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.min = 0,
|
|
.max = 1,
|
|
.step = 1,
|
|
.def = 0,
|
|
.flags = V4L2_CTRL_FLAG_READ_ONLY,
|
|
};
|
|
|
|
static void lt6911c_reset(struct lt6911c_state *lt6911c)
|
|
{
|
|
gpiod_set_value(lt6911c->reset_gpio, 0);
|
|
usleep_range(2000, 2100);
|
|
gpiod_set_value(lt6911c->reset_gpio, 1);
|
|
usleep_range(120*1000, 121*1000);
|
|
gpiod_set_value(lt6911c->reset_gpio, 0);
|
|
usleep_range(300*1000, 310*1000);
|
|
}
|
|
|
|
static int lt6911c_init_v4l2_ctrls(struct lt6911c_state *lt6911c)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
int ret;
|
|
|
|
sd = <6911c->sd;
|
|
ret = v4l2_ctrl_handler_init(<6911c->hdl, 5);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lt6911c->link_freq = v4l2_ctrl_new_int_menu(<6911c->hdl, NULL,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq_menu_items) - 1, 0,
|
|
link_freq_menu_items);
|
|
lt6911c->pixel_rate = v4l2_ctrl_new_std(<6911c->hdl, NULL,
|
|
V4L2_CID_PIXEL_RATE,
|
|
0, LT6911C_PIXEL_RATE, 1, LT6911C_PIXEL_RATE);
|
|
|
|
lt6911c->detect_tx_5v_ctrl = v4l2_ctrl_new_std(<6911c->hdl,
|
|
NULL, V4L2_CID_DV_RX_POWER_PRESENT,
|
|
0, 1, 0, 0);
|
|
|
|
lt6911c->audio_sampling_rate_ctrl =
|
|
v4l2_ctrl_new_custom(<6911c->hdl,
|
|
<6911c_ctrl_audio_sampling_rate, NULL);
|
|
lt6911c->audio_present_ctrl = v4l2_ctrl_new_custom(<6911c->hdl,
|
|
<6911c_ctrl_audio_present, NULL);
|
|
|
|
sd->ctrl_handler = <6911c->hdl;
|
|
if (lt6911c->hdl.error) {
|
|
ret = lt6911c->hdl.error;
|
|
v4l2_err(sd, "cfg v4l2 ctrls failed! ret:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
__v4l2_ctrl_s_ctrl(lt6911c->link_freq, link_freq_menu_items[0]);
|
|
__v4l2_ctrl_s_ctrl_int64(lt6911c->pixel_rate, LT6911C_PIXEL_RATE);
|
|
|
|
if (lt6911c_update_controls(sd)) {
|
|
ret = -ENODEV;
|
|
v4l2_err(sd, "update v4l2 ctrls failed! ret:%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static int lt6911c_probe_of(struct lt6911c_state *lt6911c)
|
|
{
|
|
struct device *dev = <6911c->i2c_client->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct v4l2_fwnode_endpoint endpoint = { .bus_type = 0 };
|
|
struct device_node *ep;
|
|
int ret;
|
|
|
|
ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
|
|
<6911c->module_index);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
|
|
<6911c->module_facing);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
|
|
<6911c->module_name);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
|
|
<6911c->len_name);
|
|
if (ret) {
|
|
dev_err(dev, "could not get module information!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
lt6911c->power_gpio = devm_gpiod_get_optional(dev, "power",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(lt6911c->power_gpio)) {
|
|
dev_err(dev, "failed to get power gpio\n");
|
|
ret = PTR_ERR(lt6911c->power_gpio);
|
|
return ret;
|
|
}
|
|
|
|
lt6911c->reset_gpio = devm_gpiod_get_optional(dev, "reset",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(lt6911c->reset_gpio)) {
|
|
dev_err(dev, "failed to get reset gpio\n");
|
|
ret = PTR_ERR(lt6911c->reset_gpio);
|
|
return ret;
|
|
}
|
|
|
|
lt6911c->plugin_det_gpio = devm_gpiod_get_optional(dev, "plugin-det",
|
|
GPIOD_IN);
|
|
if (IS_ERR(lt6911c->plugin_det_gpio)) {
|
|
dev_err(dev, "failed to get plugin det gpio\n");
|
|
ret = PTR_ERR(lt6911c->plugin_det_gpio);
|
|
return ret;
|
|
}
|
|
|
|
lt6911c->hpd_ctl_gpio = devm_gpiod_get_optional(dev, "hpd-ctl",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(lt6911c->hpd_ctl_gpio)) {
|
|
dev_err(dev, "failed to get hpd ctl gpio\n");
|
|
ret = PTR_ERR(lt6911c->hpd_ctl_gpio);
|
|
return ret;
|
|
}
|
|
|
|
ep = of_graph_get_next_endpoint(dev->of_node, NULL);
|
|
if (!ep) {
|
|
dev_err(dev, "missing endpoint node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(of_fwnode_handle(ep), &endpoint);
|
|
if (ret) {
|
|
dev_err(dev, "failed to parse endpoint\n");
|
|
goto put_node;
|
|
}
|
|
|
|
if (endpoint.bus_type != V4L2_MBUS_CSI2_DPHY ||
|
|
endpoint.bus.mipi_csi2.num_data_lanes == 0) {
|
|
dev_err(dev, "missing CSI-2 properties in endpoint\n");
|
|
ret = -EINVAL;
|
|
goto free_endpoint;
|
|
}
|
|
|
|
lt6911c->xvclk = devm_clk_get(dev, "xvclk");
|
|
if (IS_ERR(lt6911c->xvclk)) {
|
|
dev_err(dev, "failed to get xvclk\n");
|
|
ret = -EINVAL;
|
|
goto free_endpoint;
|
|
}
|
|
|
|
ret = clk_prepare_enable(lt6911c->xvclk);
|
|
if (ret) {
|
|
dev_err(dev, "Failed! to enable xvclk\n");
|
|
goto free_endpoint;
|
|
}
|
|
|
|
lt6911c->csi_lanes_in_use = endpoint.bus.mipi_csi2.num_data_lanes;
|
|
lt6911c->bus = endpoint.bus.mipi_csi2;
|
|
lt6911c->enable_hdcp = false;
|
|
|
|
gpiod_set_value(lt6911c->hpd_ctl_gpio, 0);
|
|
gpiod_set_value(lt6911c->power_gpio, 1);
|
|
lt6911c_reset(lt6911c);
|
|
|
|
ret = 0;
|
|
|
|
free_endpoint:
|
|
v4l2_fwnode_endpoint_free(&endpoint);
|
|
put_node:
|
|
of_node_put(ep);
|
|
return ret;
|
|
}
|
|
#else
|
|
static inline int lt6911c_probe_of(struct lt6911c_state *state)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
static int lt6911c_check_chip_id(struct lt6911c_state *lt6911c)
|
|
{
|
|
struct device *dev = <6911c->i2c_client->dev;
|
|
struct v4l2_subdev *sd = <6911c->sd;
|
|
u8 id_h, id_l;
|
|
u32 chipid;
|
|
int ret = 0;
|
|
|
|
lt6911c_i2c_enable(sd);
|
|
id_l = i2c_rd8(sd, CHIPID_REGL);
|
|
id_h = i2c_rd8(sd, CHIPID_REGH);
|
|
lt6911c_i2c_disable(sd);
|
|
|
|
chipid = (id_h << 8) | id_l;
|
|
if (chipid != LT6911C_CHIPID) {
|
|
dev_err(dev, "chipid err, read:%#x, expect:%#x\n",
|
|
chipid, LT6911C_CHIPID);
|
|
return -EINVAL;
|
|
}
|
|
dev_info(dev, "check chipid ok, id:%#x", chipid);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lt6911c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lt6911c_state *lt6911c;
|
|
struct v4l2_subdev *sd;
|
|
struct device *dev = &client->dev;
|
|
char facing[2];
|
|
int err;
|
|
|
|
dev_info(dev, "driver version: %02x.%02x.%02x",
|
|
DRIVER_VERSION >> 16,
|
|
(DRIVER_VERSION & 0xff00) >> 8,
|
|
DRIVER_VERSION & 0x00ff);
|
|
|
|
lt6911c = devm_kzalloc(dev, sizeof(struct lt6911c_state), GFP_KERNEL);
|
|
if (!lt6911c)
|
|
return -ENOMEM;
|
|
|
|
sd = <6911c->sd;
|
|
lt6911c->i2c_client = client;
|
|
lt6911c->cur_mode = &supported_modes[0];
|
|
lt6911c->mbus_fmt_code = MEDIA_BUS_FMT_UYVY8_2X8;
|
|
|
|
err = lt6911c_probe_of(lt6911c);
|
|
if (err) {
|
|
v4l2_err(sd, "lt6911c_parse_of failed! err:%d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = lt6911c_check_chip_id(lt6911c);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
lt6911c_reset(lt6911c);
|
|
|
|
mutex_init(<6911c->confctl_mutex);
|
|
err = lt6911c_init_v4l2_ctrls(lt6911c);
|
|
if (err)
|
|
goto err_free_hdl;
|
|
|
|
client->flags |= I2C_CLIENT_SCCB;
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
v4l2_i2c_subdev_init(sd, client, <6911c_ops);
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
#endif
|
|
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
lt6911c->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
err = media_entity_pads_init(&sd->entity, 1, <6911c->pad);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "media entity init failed! err:%d\n", err);
|
|
goto err_free_hdl;
|
|
}
|
|
#endif
|
|
memset(facing, 0, sizeof(facing));
|
|
if (strcmp(lt6911c->module_facing, "back") == 0)
|
|
facing[0] = 'b';
|
|
else
|
|
facing[0] = 'f';
|
|
|
|
snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
|
|
lt6911c->module_index, facing,
|
|
LT6911C_NAME, dev_name(sd->dev));
|
|
err = v4l2_async_register_subdev_sensor(sd);
|
|
if (err < 0) {
|
|
v4l2_err(sd, "v4l2 register subdev failed! err:%d\n", err);
|
|
goto err_clean_entity;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(<6911c->delayed_work_enable_hotplug,
|
|
lt6911c_delayed_work_enable_hotplug);
|
|
INIT_DELAYED_WORK(<6911c->delayed_work_res_change,
|
|
lt6911c_delayed_work_res_change);
|
|
|
|
if (lt6911c->i2c_client->irq) {
|
|
v4l2_dbg(1, debug, sd, "cfg lt6911c irq!\n");
|
|
err = devm_request_threaded_irq(dev,
|
|
lt6911c->i2c_client->irq,
|
|
NULL, lt6911c_res_change_irq_handler,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
"lt6911c", lt6911c);
|
|
if (err) {
|
|
v4l2_err(sd, "request irq failed! err:%d\n", err);
|
|
goto err_work_queues;
|
|
}
|
|
} else {
|
|
v4l2_dbg(1, debug, sd, "no irq, cfg poll!\n");
|
|
INIT_WORK(<6911c->work_i2c_poll, lt6911c_work_i2c_poll);
|
|
timer_setup(<6911c->timer, lt6911c_irq_poll_timer, 0);
|
|
lt6911c->timer.expires = jiffies +
|
|
msecs_to_jiffies(POLL_INTERVAL_MS);
|
|
add_timer(<6911c->timer);
|
|
}
|
|
|
|
lt6911c->plugin_irq = gpiod_to_irq(lt6911c->plugin_det_gpio);
|
|
if (lt6911c->plugin_irq < 0)
|
|
dev_err(dev, "failed to get plugin det irq, maybe no use\n");
|
|
|
|
err = devm_request_threaded_irq(dev, lt6911c->plugin_irq, NULL,
|
|
plugin_detect_irq_handler, IRQF_TRIGGER_FALLING |
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT, "lt6911c",
|
|
lt6911c);
|
|
if (err)
|
|
dev_err(dev, "failed to register plugin det irq (%d), maybe no use\n", err);
|
|
|
|
err = v4l2_ctrl_handler_setup(sd->ctrl_handler);
|
|
if (err) {
|
|
v4l2_err(sd, "v4l2 ctrl handler setup failed! err:%d\n", err);
|
|
goto err_work_queues;
|
|
}
|
|
|
|
lt6911c_config_hpd(sd);
|
|
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
|
|
client->addr << 1, client->adapter->name);
|
|
|
|
return 0;
|
|
|
|
err_work_queues:
|
|
if (!lt6911c->i2c_client->irq)
|
|
flush_work(<6911c->work_i2c_poll);
|
|
cancel_delayed_work(<6911c->delayed_work_enable_hotplug);
|
|
cancel_delayed_work(<6911c->delayed_work_res_change);
|
|
err_clean_entity:
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
err_free_hdl:
|
|
v4l2_ctrl_handler_free(<6911c->hdl);
|
|
mutex_destroy(<6911c->confctl_mutex);
|
|
return err;
|
|
}
|
|
|
|
static void lt6911c_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct lt6911c_state *lt6911c = to_state(sd);
|
|
|
|
if (!lt6911c->i2c_client->irq) {
|
|
del_timer_sync(<6911c->timer);
|
|
flush_work(<6911c->work_i2c_poll);
|
|
}
|
|
cancel_delayed_work_sync(<6911c->delayed_work_enable_hotplug);
|
|
cancel_delayed_work_sync(<6911c->delayed_work_res_change);
|
|
v4l2_async_unregister_subdev(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
v4l2_ctrl_handler_free(<6911c->hdl);
|
|
mutex_destroy(<6911c->confctl_mutex);
|
|
clk_disable_unprepare(lt6911c->xvclk);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id lt6911c_of_match[] = {
|
|
{ .compatible = "lontium,lt6911c" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lt6911c_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver lt6911c_driver = {
|
|
.driver = {
|
|
.name = LT6911C_NAME,
|
|
.of_match_table = of_match_ptr(lt6911c_of_match),
|
|
},
|
|
.probe = lt6911c_probe,
|
|
.remove = lt6911c_remove,
|
|
};
|
|
|
|
static int __init lt6911c_driver_init(void)
|
|
{
|
|
return i2c_add_driver(<6911c_driver);
|
|
}
|
|
|
|
static void __exit lt6911c_driver_exit(void)
|
|
{
|
|
i2c_del_driver(<6911c_driver);
|
|
}
|
|
|
|
device_initcall_sync(lt6911c_driver_init);
|
|
module_exit(lt6911c_driver_exit);
|
|
|
|
MODULE_DESCRIPTION("Lontium lt6911c HDMI to CSI-2 bridge driver");
|
|
MODULE_AUTHOR("Jianwei Fan <jianwei.fan@rock-chips.com>");
|
|
MODULE_LICENSE("GPL");
|