98 lines
2.3 KiB
YAML
98 lines
2.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Omnivision OV2680 CMOS Sensor
|
|
|
|
maintainers:
|
|
- Rui Miguel Silva <rmfrfs@gmail.com>
|
|
|
|
description: |-
|
|
The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2
|
|
megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200)
|
|
camera. It provides full-frame, sub-sampled, or windowed 10-bit images in
|
|
various formats via the control of the Serial Camera Control Bus (SCCB)
|
|
interface. The OV2680 has an image array capable of operating at up to 30
|
|
frames per second (fps) in UXGA resolution.
|
|
|
|
properties:
|
|
compatible:
|
|
const: ovti,ov2680
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
const: xvclk
|
|
|
|
reset-gpios:
|
|
description:
|
|
The phandle and specifier for the GPIO that controls sensor reset.
|
|
This corresponds to the hardware pin XSHUTDOWN which is physically
|
|
active low.
|
|
maxItems: 1
|
|
|
|
DOVDD-supply:
|
|
description:
|
|
Definition of the regulator used as interface power supply.
|
|
|
|
AVDD-supply:
|
|
description:
|
|
Definition of the regulator used as analog power supply.
|
|
|
|
DVDD-supply:
|
|
description:
|
|
Definition of the regulator used as digital power supply.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
A node containing an output port node.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- DOVDD-supply
|
|
- AVDD-supply
|
|
- DVDD-supply
|
|
- reset-gpios
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ov2680: camera-sensor@36 {
|
|
compatible = "ovti,ov2680";
|
|
reg = <0x36>;
|
|
clocks = <&osc>;
|
|
clock-names = "xvclk";
|
|
reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
|
|
|
DOVDD-supply = <&sw2_reg>;
|
|
DVDD-supply = <&sw2_reg>;
|
|
AVDD-supply = <®_peri_3p15v>;
|
|
|
|
port {
|
|
ov2680_to_mipi: endpoint {
|
|
remote-endpoint = <&mipi_from_sensor>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|