643 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			643 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0-or-later
 | 
						|
/*
 | 
						|
 * TPO TD043MTEA1 Panel driver
 | 
						|
 *
 | 
						|
 * Author: Gražvydas Ignotas <notasas@gmail.com>
 | 
						|
 * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/spi/spi.h>
 | 
						|
#include <linux/regulator/consumer.h>
 | 
						|
#include <linux/gpio.h>
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/of_gpio.h>
 | 
						|
 | 
						|
#include <video/omapfb_dss.h>
 | 
						|
 | 
						|
#define TPO_R02_MODE(x)		((x) & 7)
 | 
						|
#define TPO_R02_MODE_800x480	7
 | 
						|
#define TPO_R02_NCLK_RISING	BIT(3)
 | 
						|
#define TPO_R02_HSYNC_HIGH	BIT(4)
 | 
						|
#define TPO_R02_VSYNC_HIGH	BIT(5)
 | 
						|
 | 
						|
#define TPO_R03_NSTANDBY	BIT(0)
 | 
						|
#define TPO_R03_EN_CP_CLK	BIT(1)
 | 
						|
#define TPO_R03_EN_VGL_PUMP	BIT(2)
 | 
						|
#define TPO_R03_EN_PWM		BIT(3)
 | 
						|
#define TPO_R03_DRIVING_CAP_100	BIT(4)
 | 
						|
#define TPO_R03_EN_PRE_CHARGE	BIT(6)
 | 
						|
#define TPO_R03_SOFTWARE_CTL	BIT(7)
 | 
						|
 | 
						|
#define TPO_R04_NFLIP_H		BIT(0)
 | 
						|
#define TPO_R04_NFLIP_V		BIT(1)
 | 
						|
#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
 | 
						|
#define TPO_R04_VGL_FREQ_1H	BIT(4)
 | 
						|
 | 
						|
#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
 | 
						|
			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
 | 
						|
			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
 | 
						|
			TPO_R03_SOFTWARE_CTL)
 | 
						|
 | 
						|
#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
 | 
						|
			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
 | 
						|
 | 
						|
static const u16 tpo_td043_def_gamma[12] = {
 | 
						|
	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
 | 
						|
};
 | 
						|
 | 
						|
struct panel_drv_data {
 | 
						|
	struct omap_dss_device	dssdev;
 | 
						|
	struct omap_dss_device *in;
 | 
						|
 | 
						|
	struct omap_video_timings videomode;
 | 
						|
 | 
						|
	int data_lines;
 | 
						|
 | 
						|
	struct spi_device *spi;
 | 
						|
	struct regulator *vcc_reg;
 | 
						|
	int nreset_gpio;
 | 
						|
	u16 gamma[12];
 | 
						|
	u32 mode;
 | 
						|
	u32 hmirror:1;
 | 
						|
	u32 vmirror:1;
 | 
						|
	u32 powered_on:1;
 | 
						|
	u32 spi_suspended:1;
 | 
						|
	u32 power_on_resume:1;
 | 
						|
};
 | 
						|
 | 
						|
static const struct omap_video_timings tpo_td043_timings = {
 | 
						|
	.x_res		= 800,
 | 
						|
	.y_res		= 480,
 | 
						|
 | 
						|
	.pixelclock	= 36000000,
 | 
						|
 | 
						|
	.hsw		= 1,
 | 
						|
	.hfp		= 68,
 | 
						|
	.hbp		= 214,
 | 
						|
 | 
						|
	.vsw		= 1,
 | 
						|
	.vfp		= 39,
 | 
						|
	.vbp		= 34,
 | 
						|
 | 
						|
	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
 | 
						|
	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
 | 
						|
	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
 | 
						|
	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
 | 
						|
	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
 | 
						|
};
 | 
						|
 | 
						|
#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
 | 
						|
 | 
						|
static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
 | 
						|
{
 | 
						|
	struct spi_message	m;
 | 
						|
	struct spi_transfer	xfer;
 | 
						|
	u16			w;
 | 
						|
	int			r;
 | 
						|
 | 
						|
	spi_message_init(&m);
 | 
						|
 | 
						|
	memset(&xfer, 0, sizeof(xfer));
 | 
						|
 | 
						|
	w = ((u16)addr << 10) | (1 << 8) | data;
 | 
						|
	xfer.tx_buf = &w;
 | 
						|
	xfer.bits_per_word = 16;
 | 
						|
	xfer.len = 2;
 | 
						|
	spi_message_add_tail(&xfer, &m);
 | 
						|
 | 
						|
	r = spi_sync(spi, &m);
 | 
						|
	if (r < 0)
 | 
						|
		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
 | 
						|
	return r;
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
 | 
						|
{
 | 
						|
	u8 i, val;
 | 
						|
 | 
						|
	/* gamma bits [9:8] */
 | 
						|
	for (val = i = 0; i < 4; i++)
 | 
						|
		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
 | 
						|
	tpo_td043_write(spi, 0x11, val);
 | 
						|
 | 
						|
	for (val = i = 0; i < 4; i++)
 | 
						|
		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
 | 
						|
	tpo_td043_write(spi, 0x12, val);
 | 
						|
 | 
						|
	for (val = i = 0; i < 4; i++)
 | 
						|
		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
 | 
						|
	tpo_td043_write(spi, 0x13, val);
 | 
						|
 | 
						|
	/* gamma bits [7:0] */
 | 
						|
	for (val = i = 0; i < 12; i++)
 | 
						|
		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
 | 
						|
{
 | 
						|
	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
 | 
						|
		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
 | 
						|
	if (h)
 | 
						|
		reg4 &= ~TPO_R04_NFLIP_H;
 | 
						|
	if (v)
 | 
						|
		reg4 &= ~TPO_R04_NFLIP_V;
 | 
						|
 | 
						|
	return tpo_td043_write(spi, 4, reg4);
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
 | 
						|
 | 
						|
	ddata->hmirror = enable;
 | 
						|
	return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
 | 
						|
			ddata->vmirror);
 | 
						|
}
 | 
						|
 | 
						|
static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
 | 
						|
 | 
						|
	return ddata->hmirror;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_vmirror_show(struct device *dev,
 | 
						|
	struct device_attribute *attr, char *buf)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	return sysfs_emit(buf, "%d\n", ddata->vmirror);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_vmirror_store(struct device *dev,
 | 
						|
	struct device_attribute *attr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
	int val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = kstrtoint(buf, 0, &val);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	val = !!val;
 | 
						|
 | 
						|
	ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ddata->vmirror = val;
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_mode_show(struct device *dev,
 | 
						|
	struct device_attribute *attr, char *buf)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	return sysfs_emit(buf, "%d\n", ddata->mode);
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_mode_store(struct device *dev,
 | 
						|
	struct device_attribute *attr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
	long val;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = kstrtol(buf, 0, &val);
 | 
						|
	if (ret != 0 || val & ~7)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	ddata->mode = val;
 | 
						|
 | 
						|
	val |= TPO_R02_NCLK_RISING;
 | 
						|
	tpo_td043_write(ddata->spi, 2, val);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_gamma_show(struct device *dev,
 | 
						|
	struct device_attribute *attr, char *buf)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
	ssize_t len = 0;
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
 | 
						|
		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
 | 
						|
				ddata->gamma[i]);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
		len += ret;
 | 
						|
	}
 | 
						|
	buf[len - 1] = '\n';
 | 
						|
 | 
						|
	return len;
 | 
						|
}
 | 
						|
 | 
						|
static ssize_t tpo_td043_gamma_store(struct device *dev,
 | 
						|
	struct device_attribute *attr, const char *buf, size_t count)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
	unsigned int g[12];
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
 | 
						|
	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
 | 
						|
			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
 | 
						|
			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
 | 
						|
 | 
						|
	if (ret != 12)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	for (i = 0; i < 12; i++)
 | 
						|
		ddata->gamma[i] = g[i];
 | 
						|
 | 
						|
	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
 | 
						|
		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
 | 
						|
static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
 | 
						|
		tpo_td043_mode_show, tpo_td043_mode_store);
 | 
						|
static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
 | 
						|
		tpo_td043_gamma_show, tpo_td043_gamma_store);
 | 
						|
 | 
						|
static struct attribute *tpo_td043_attrs[] = {
 | 
						|
	&dev_attr_vmirror.attr,
 | 
						|
	&dev_attr_mode.attr,
 | 
						|
	&dev_attr_gamma.attr,
 | 
						|
	NULL,
 | 
						|
};
 | 
						|
 | 
						|
static const struct attribute_group tpo_td043_attr_group = {
 | 
						|
	.attrs = tpo_td043_attrs,
 | 
						|
};
 | 
						|
 | 
						|
static int tpo_td043_power_on(struct panel_drv_data *ddata)
 | 
						|
{
 | 
						|
	int r;
 | 
						|
 | 
						|
	if (ddata->powered_on)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	r = regulator_enable(ddata->vcc_reg);
 | 
						|
	if (r != 0)
 | 
						|
		return r;
 | 
						|
 | 
						|
	/* wait for panel to stabilize */
 | 
						|
	msleep(160);
 | 
						|
 | 
						|
	if (gpio_is_valid(ddata->nreset_gpio))
 | 
						|
		gpio_set_value(ddata->nreset_gpio, 1);
 | 
						|
 | 
						|
	tpo_td043_write(ddata->spi, 2,
 | 
						|
			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
 | 
						|
	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
 | 
						|
	tpo_td043_write(ddata->spi, 0x20, 0xf0);
 | 
						|
	tpo_td043_write(ddata->spi, 0x21, 0xf0);
 | 
						|
	tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
 | 
						|
			ddata->vmirror);
 | 
						|
	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
 | 
						|
 | 
						|
	ddata->powered_on = 1;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_power_off(struct panel_drv_data *ddata)
 | 
						|
{
 | 
						|
	if (!ddata->powered_on)
 | 
						|
		return;
 | 
						|
 | 
						|
	tpo_td043_write(ddata->spi, 3,
 | 
						|
			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
 | 
						|
 | 
						|
	if (gpio_is_valid(ddata->nreset_gpio))
 | 
						|
		gpio_set_value(ddata->nreset_gpio, 0);
 | 
						|
 | 
						|
	/* wait for at least 2 vsyncs before cutting off power */
 | 
						|
	msleep(50);
 | 
						|
 | 
						|
	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
 | 
						|
 | 
						|
	regulator_disable(ddata->vcc_reg);
 | 
						|
 | 
						|
	ddata->powered_on = 0;
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_connect(struct omap_dss_device *dssdev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	if (omapdss_device_is_connected(dssdev))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	return in->ops.dpi->connect(in, dssdev);
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	if (!omapdss_device_is_connected(dssdev))
 | 
						|
		return;
 | 
						|
 | 
						|
	in->ops.dpi->disconnect(in, dssdev);
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_enable(struct omap_dss_device *dssdev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
	int r;
 | 
						|
 | 
						|
	if (!omapdss_device_is_connected(dssdev))
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	if (omapdss_device_is_enabled(dssdev))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (ddata->data_lines)
 | 
						|
		in->ops.dpi->set_data_lines(in, ddata->data_lines);
 | 
						|
	in->ops.dpi->set_timings(in, &ddata->videomode);
 | 
						|
 | 
						|
	r = in->ops.dpi->enable(in);
 | 
						|
	if (r)
 | 
						|
		return r;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * If we are resuming from system suspend, SPI clocks might not be
 | 
						|
	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
 | 
						|
	 */
 | 
						|
	if (!ddata->spi_suspended) {
 | 
						|
		r = tpo_td043_power_on(ddata);
 | 
						|
		if (r) {
 | 
						|
			in->ops.dpi->disable(in);
 | 
						|
			return r;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_disable(struct omap_dss_device *dssdev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	if (!omapdss_device_is_enabled(dssdev))
 | 
						|
		return;
 | 
						|
 | 
						|
	in->ops.dpi->disable(in);
 | 
						|
 | 
						|
	if (!ddata->spi_suspended)
 | 
						|
		tpo_td043_power_off(ddata);
 | 
						|
 | 
						|
	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
 | 
						|
		struct omap_video_timings *timings)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	ddata->videomode = *timings;
 | 
						|
	dssdev->panel.timings = *timings;
 | 
						|
 | 
						|
	in->ops.dpi->set_timings(in, timings);
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
 | 
						|
		struct omap_video_timings *timings)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
 | 
						|
	*timings = ddata->videomode;
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
 | 
						|
		struct omap_video_timings *timings)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = to_panel_data(dssdev);
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	return in->ops.dpi->check_timings(in, timings);
 | 
						|
}
 | 
						|
 | 
						|
static struct omap_dss_driver tpo_td043_ops = {
 | 
						|
	.connect	= tpo_td043_connect,
 | 
						|
	.disconnect	= tpo_td043_disconnect,
 | 
						|
 | 
						|
	.enable		= tpo_td043_enable,
 | 
						|
	.disable	= tpo_td043_disable,
 | 
						|
 | 
						|
	.set_timings	= tpo_td043_set_timings,
 | 
						|
	.get_timings	= tpo_td043_get_timings,
 | 
						|
	.check_timings	= tpo_td043_check_timings,
 | 
						|
 | 
						|
	.set_mirror	= tpo_td043_set_hmirror,
 | 
						|
	.get_mirror	= tpo_td043_get_hmirror,
 | 
						|
 | 
						|
	.get_resolution	= omapdss_default_get_resolution,
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static int tpo_td043_probe_of(struct spi_device *spi)
 | 
						|
{
 | 
						|
	struct device_node *node = spi->dev.of_node;
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 | 
						|
	struct omap_dss_device *in;
 | 
						|
	int gpio;
 | 
						|
 | 
						|
	gpio = of_get_named_gpio(node, "reset-gpios", 0);
 | 
						|
	if (!gpio_is_valid(gpio)) {
 | 
						|
		dev_err(&spi->dev, "failed to parse enable gpio\n");
 | 
						|
		return gpio;
 | 
						|
	}
 | 
						|
	ddata->nreset_gpio = gpio;
 | 
						|
 | 
						|
	in = omapdss_of_find_source_for_first_ep(node);
 | 
						|
	if (IS_ERR(in)) {
 | 
						|
		dev_err(&spi->dev, "failed to find video source\n");
 | 
						|
		return PTR_ERR(in);
 | 
						|
	}
 | 
						|
 | 
						|
	ddata->in = in;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_probe(struct spi_device *spi)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata;
 | 
						|
	struct omap_dss_device *dssdev;
 | 
						|
	int r;
 | 
						|
 | 
						|
	dev_dbg(&spi->dev, "%s\n", __func__);
 | 
						|
 | 
						|
	if (!spi->dev.of_node)
 | 
						|
		return -ENODEV;
 | 
						|
 | 
						|
	spi->bits_per_word = 16;
 | 
						|
	spi->mode = SPI_MODE_0;
 | 
						|
 | 
						|
	r = spi_setup(spi);
 | 
						|
	if (r < 0) {
 | 
						|
		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
 | 
						|
		return r;
 | 
						|
	}
 | 
						|
 | 
						|
	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
 | 
						|
	if (ddata == NULL)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	dev_set_drvdata(&spi->dev, ddata);
 | 
						|
 | 
						|
	ddata->spi = spi;
 | 
						|
 | 
						|
	r = tpo_td043_probe_of(spi);
 | 
						|
	if (r)
 | 
						|
		return r;
 | 
						|
 | 
						|
	ddata->mode = TPO_R02_MODE_800x480;
 | 
						|
	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
 | 
						|
 | 
						|
	ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
 | 
						|
	if (IS_ERR(ddata->vcc_reg)) {
 | 
						|
		r = dev_err_probe(&spi->dev, r, "failed to get LCD VCC regulator\n");
 | 
						|
		goto err_regulator;
 | 
						|
	}
 | 
						|
 | 
						|
	if (gpio_is_valid(ddata->nreset_gpio)) {
 | 
						|
		r = devm_gpio_request_one(&spi->dev,
 | 
						|
				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
 | 
						|
				"lcd reset");
 | 
						|
		if (r < 0) {
 | 
						|
			dev_err(&spi->dev, "couldn't request reset GPIO\n");
 | 
						|
			goto err_gpio_req;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
 | 
						|
	if (r) {
 | 
						|
		dev_err(&spi->dev, "failed to create sysfs files\n");
 | 
						|
		goto err_sysfs;
 | 
						|
	}
 | 
						|
 | 
						|
	ddata->videomode = tpo_td043_timings;
 | 
						|
 | 
						|
	dssdev = &ddata->dssdev;
 | 
						|
	dssdev->dev = &spi->dev;
 | 
						|
	dssdev->driver = &tpo_td043_ops;
 | 
						|
	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
 | 
						|
	dssdev->owner = THIS_MODULE;
 | 
						|
	dssdev->panel.timings = ddata->videomode;
 | 
						|
 | 
						|
	r = omapdss_register_display(dssdev);
 | 
						|
	if (r) {
 | 
						|
		dev_err(&spi->dev, "Failed to register panel\n");
 | 
						|
		goto err_reg;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_reg:
 | 
						|
	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
 | 
						|
err_sysfs:
 | 
						|
err_gpio_req:
 | 
						|
err_regulator:
 | 
						|
	omap_dss_put_device(ddata->in);
 | 
						|
	return r;
 | 
						|
}
 | 
						|
 | 
						|
static void tpo_td043_remove(struct spi_device *spi)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
 | 
						|
	struct omap_dss_device *dssdev = &ddata->dssdev;
 | 
						|
	struct omap_dss_device *in = ddata->in;
 | 
						|
 | 
						|
	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
 | 
						|
 | 
						|
	omapdss_unregister_display(dssdev);
 | 
						|
 | 
						|
	tpo_td043_disable(dssdev);
 | 
						|
	tpo_td043_disconnect(dssdev);
 | 
						|
 | 
						|
	omap_dss_put_device(in);
 | 
						|
 | 
						|
	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_PM_SLEEP
 | 
						|
static int tpo_td043_spi_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
 | 
						|
	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
 | 
						|
 | 
						|
	ddata->power_on_resume = ddata->powered_on;
 | 
						|
	tpo_td043_power_off(ddata);
 | 
						|
	ddata->spi_suspended = 1;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int tpo_td043_spi_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct panel_drv_data *ddata = dev_get_drvdata(dev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dev_dbg(dev, "tpo_td043_spi_resume\n");
 | 
						|
 | 
						|
	if (ddata->power_on_resume) {
 | 
						|
		ret = tpo_td043_power_on(ddata);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
	ddata->spi_suspended = 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
 | 
						|
	tpo_td043_spi_suspend, tpo_td043_spi_resume);
 | 
						|
 | 
						|
static const struct of_device_id tpo_td043_of_match[] = {
 | 
						|
	{ .compatible = "omapdss,tpo,td043mtea1", },
 | 
						|
	{},
 | 
						|
};
 | 
						|
 | 
						|
MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
 | 
						|
 | 
						|
static struct spi_driver tpo_td043_spi_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name	= "panel-tpo-td043mtea1",
 | 
						|
		.pm	= &tpo_td043_spi_pm,
 | 
						|
		.of_match_table = tpo_td043_of_match,
 | 
						|
		.suppress_bind_attrs = true,
 | 
						|
	},
 | 
						|
	.probe	= tpo_td043_probe,
 | 
						|
	.remove	= tpo_td043_remove,
 | 
						|
};
 | 
						|
 | 
						|
module_spi_driver(tpo_td043_spi_driver);
 | 
						|
 | 
						|
MODULE_ALIAS("spi:tpo,td043mtea1");
 | 
						|
MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
 | 
						|
MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
 | 
						|
MODULE_LICENSE("GPL");
 |