1262 lines
		
	
	
		
			36 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1262 lines
		
	
	
		
			36 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Codec driver for ST STA350 2.1-channel high-efficiency digital audio system
 | |
|  *
 | |
|  * Copyright: 2014 Raumfeld GmbH
 | |
|  * Author: Sven Brandau <info@brandau.biz>
 | |
|  *
 | |
|  * based on code from:
 | |
|  *	Raumfeld GmbH
 | |
|  *	  Johannes Stezenbach <js@sig21.net>
 | |
|  *	Wolfson Microelectronics PLC.
 | |
|  *	  Mark Brown <broonie@opensource.wolfsonmicro.com>
 | |
|  *	Freescale Semiconductor, Inc.
 | |
|  *	  Timur Tabi <timur@freescale.com>
 | |
|  */
 | |
| 
 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ":%s:%d: " fmt, __func__, __LINE__
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/pm.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/of_gpio.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/slab.h>
 | |
| #include <sound/core.h>
 | |
| #include <sound/pcm.h>
 | |
| #include <sound/pcm_params.h>
 | |
| #include <sound/soc.h>
 | |
| #include <sound/soc-dapm.h>
 | |
| #include <sound/initval.h>
 | |
| #include <sound/tlv.h>
 | |
| 
 | |
| #include <sound/sta350.h>
 | |
| #include "sta350.h"
 | |
| 
 | |
| #define STA350_RATES (SNDRV_PCM_RATE_32000 | \
 | |
| 		      SNDRV_PCM_RATE_44100 | \
 | |
| 		      SNDRV_PCM_RATE_48000 | \
 | |
| 		      SNDRV_PCM_RATE_88200 | \
 | |
| 		      SNDRV_PCM_RATE_96000 | \
 | |
| 		      SNDRV_PCM_RATE_176400 | \
 | |
| 		      SNDRV_PCM_RATE_192000)
 | |
| 
 | |
| #define STA350_FORMATS \
 | |
| 	(SNDRV_PCM_FMTBIT_S16_LE  | SNDRV_PCM_FMTBIT_S18_3LE | \
 | |
| 	 SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_3LE | \
 | |
| 	 SNDRV_PCM_FMTBIT_S24_LE  | SNDRV_PCM_FMTBIT_S32_LE)
 | |
| 
 | |
| /* Power-up register defaults */
 | |
| static const struct reg_default sta350_regs[] = {
 | |
| 	{  0x0, 0x63 },
 | |
| 	{  0x1, 0x80 },
 | |
| 	{  0x2, 0xdf },
 | |
| 	{  0x3, 0x40 },
 | |
| 	{  0x4, 0xc2 },
 | |
| 	{  0x5, 0x5c },
 | |
| 	{  0x6, 0x00 },
 | |
| 	{  0x7, 0xff },
 | |
| 	{  0x8, 0x60 },
 | |
| 	{  0x9, 0x60 },
 | |
| 	{  0xa, 0x60 },
 | |
| 	{  0xb, 0x00 },
 | |
| 	{  0xc, 0x00 },
 | |
| 	{  0xd, 0x00 },
 | |
| 	{  0xe, 0x00 },
 | |
| 	{  0xf, 0x40 },
 | |
| 	{ 0x10, 0x80 },
 | |
| 	{ 0x11, 0x77 },
 | |
| 	{ 0x12, 0x6a },
 | |
| 	{ 0x13, 0x69 },
 | |
| 	{ 0x14, 0x6a },
 | |
| 	{ 0x15, 0x69 },
 | |
| 	{ 0x16, 0x00 },
 | |
| 	{ 0x17, 0x00 },
 | |
| 	{ 0x18, 0x00 },
 | |
| 	{ 0x19, 0x00 },
 | |
| 	{ 0x1a, 0x00 },
 | |
| 	{ 0x1b, 0x00 },
 | |
| 	{ 0x1c, 0x00 },
 | |
| 	{ 0x1d, 0x00 },
 | |
| 	{ 0x1e, 0x00 },
 | |
| 	{ 0x1f, 0x00 },
 | |
| 	{ 0x20, 0x00 },
 | |
| 	{ 0x21, 0x00 },
 | |
| 	{ 0x22, 0x00 },
 | |
| 	{ 0x23, 0x00 },
 | |
| 	{ 0x24, 0x00 },
 | |
| 	{ 0x25, 0x00 },
 | |
| 	{ 0x26, 0x00 },
 | |
| 	{ 0x27, 0x2a },
 | |
| 	{ 0x28, 0xc0 },
 | |
| 	{ 0x29, 0xf3 },
 | |
| 	{ 0x2a, 0x33 },
 | |
| 	{ 0x2b, 0x00 },
 | |
| 	{ 0x2c, 0x0c },
 | |
| 	{ 0x31, 0x00 },
 | |
| 	{ 0x36, 0x00 },
 | |
| 	{ 0x37, 0x00 },
 | |
| 	{ 0x38, 0x00 },
 | |
| 	{ 0x39, 0x01 },
 | |
| 	{ 0x3a, 0xee },
 | |
| 	{ 0x3b, 0xff },
 | |
| 	{ 0x3c, 0x7e },
 | |
| 	{ 0x3d, 0xc0 },
 | |
| 	{ 0x3e, 0x26 },
 | |
| 	{ 0x3f, 0x00 },
 | |
| 	{ 0x48, 0x00 },
 | |
| 	{ 0x49, 0x00 },
 | |
| 	{ 0x4a, 0x00 },
 | |
| 	{ 0x4b, 0x04 },
 | |
| 	{ 0x4c, 0x00 },
 | |
| };
 | |
| 
 | |
| static const struct regmap_range sta350_write_regs_range[] = {
 | |
| 	regmap_reg_range(STA350_CONFA,  STA350_AUTO2),
 | |
| 	regmap_reg_range(STA350_C1CFG,  STA350_FDRC2),
 | |
| 	regmap_reg_range(STA350_EQCFG,  STA350_EVOLRES),
 | |
| 	regmap_reg_range(STA350_NSHAPE, STA350_MISC2),
 | |
| };
 | |
| 
 | |
| static const struct regmap_range sta350_read_regs_range[] = {
 | |
| 	regmap_reg_range(STA350_CONFA,  STA350_AUTO2),
 | |
| 	regmap_reg_range(STA350_C1CFG,  STA350_STATUS),
 | |
| 	regmap_reg_range(STA350_EQCFG,  STA350_EVOLRES),
 | |
| 	regmap_reg_range(STA350_NSHAPE, STA350_MISC2),
 | |
| };
 | |
| 
 | |
| static const struct regmap_range sta350_volatile_regs_range[] = {
 | |
| 	regmap_reg_range(STA350_CFADDR2, STA350_CFUD),
 | |
| 	regmap_reg_range(STA350_STATUS,  STA350_STATUS),
 | |
| };
 | |
| 
 | |
| static const struct regmap_access_table sta350_write_regs = {
 | |
| 	.yes_ranges =	sta350_write_regs_range,
 | |
| 	.n_yes_ranges =	ARRAY_SIZE(sta350_write_regs_range),
 | |
| };
 | |
| 
 | |
| static const struct regmap_access_table sta350_read_regs = {
 | |
| 	.yes_ranges =	sta350_read_regs_range,
 | |
| 	.n_yes_ranges =	ARRAY_SIZE(sta350_read_regs_range),
 | |
| };
 | |
| 
 | |
| static const struct regmap_access_table sta350_volatile_regs = {
 | |
| 	.yes_ranges =	sta350_volatile_regs_range,
 | |
| 	.n_yes_ranges =	ARRAY_SIZE(sta350_volatile_regs_range),
 | |
| };
 | |
| 
 | |
| /* regulator power supply names */
 | |
| static const char * const sta350_supply_names[] = {
 | |
| 	"vdd-dig",	/* digital supply, 3.3V */
 | |
| 	"vdd-pll",	/* pll supply, 3.3V */
 | |
| 	"vcc"		/* power amp supply, 5V - 26V */
 | |
| };
 | |
| 
 | |
| /* codec private data */
 | |
| struct sta350_priv {
 | |
| 	struct regmap *regmap;
 | |
| 	struct regulator_bulk_data supplies[ARRAY_SIZE(sta350_supply_names)];
 | |
| 	struct sta350_platform_data *pdata;
 | |
| 
 | |
| 	unsigned int mclk;
 | |
| 	unsigned int format;
 | |
| 
 | |
| 	u32 coef_shadow[STA350_COEF_COUNT];
 | |
| 	int shutdown;
 | |
| 
 | |
| 	struct gpio_desc *gpiod_nreset;
 | |
| 	struct gpio_desc *gpiod_power_down;
 | |
| 
 | |
| 	struct mutex coeff_lock;
 | |
| };
 | |
| 
 | |
| static const DECLARE_TLV_DB_SCALE(mvol_tlv, -12750, 50, 1);
 | |
| static const DECLARE_TLV_DB_SCALE(chvol_tlv, -7950, 50, 1);
 | |
| static const DECLARE_TLV_DB_SCALE(tone_tlv, -1200, 200, 0);
 | |
| 
 | |
| static const char * const sta350_drc_ac[] = {
 | |
| 	"Anti-Clipping", "Dynamic Range Compression"
 | |
| };
 | |
| static const char * const sta350_auto_gc_mode[] = {
 | |
| 	"User", "AC no clipping", "AC limited clipping (10%)",
 | |
| 	"DRC nighttime listening mode"
 | |
| };
 | |
| static const char * const sta350_auto_xo_mode[] = {
 | |
| 	"User", "80Hz", "100Hz", "120Hz", "140Hz", "160Hz", "180Hz",
 | |
| 	"200Hz", "220Hz", "240Hz", "260Hz", "280Hz", "300Hz", "320Hz",
 | |
| 	"340Hz", "360Hz"
 | |
| };
 | |
| static const char * const sta350_binary_output[] = {
 | |
| 	"FFX 3-state output - normal operation", "Binary output"
 | |
| };
 | |
| static const char * const sta350_limiter_select[] = {
 | |
| 	"Limiter Disabled", "Limiter #1", "Limiter #2"
 | |
| };
 | |
| static const char * const sta350_limiter_attack_rate[] = {
 | |
| 	"3.1584", "2.7072", "2.2560", "1.8048", "1.3536", "0.9024",
 | |
| 	"0.4512", "0.2256", "0.1504", "0.1123", "0.0902", "0.0752",
 | |
| 	"0.0645", "0.0564", "0.0501", "0.0451"
 | |
| };
 | |
| static const char * const sta350_limiter_release_rate[] = {
 | |
| 	"0.5116", "0.1370", "0.0744", "0.0499", "0.0360", "0.0299",
 | |
| 	"0.0264", "0.0208", "0.0198", "0.0172", "0.0147", "0.0137",
 | |
| 	"0.0134", "0.0117", "0.0110", "0.0104"
 | |
| };
 | |
| static const char * const sta350_noise_shaper_type[] = {
 | |
| 	"Third order", "Fourth order"
 | |
| };
 | |
| 
 | |
| static DECLARE_TLV_DB_RANGE(sta350_limiter_ac_attack_tlv,
 | |
| 	0, 7, TLV_DB_SCALE_ITEM(-1200, 200, 0),
 | |
| 	8, 16, TLV_DB_SCALE_ITEM(300, 100, 0),
 | |
| );
 | |
| 
 | |
| static DECLARE_TLV_DB_RANGE(sta350_limiter_ac_release_tlv,
 | |
| 	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0),
 | |
| 	1, 1, TLV_DB_SCALE_ITEM(-2900, 0, 0),
 | |
| 	2, 2, TLV_DB_SCALE_ITEM(-2000, 0, 0),
 | |
| 	3, 8, TLV_DB_SCALE_ITEM(-1400, 200, 0),
 | |
| 	8, 16, TLV_DB_SCALE_ITEM(-700, 100, 0),
 | |
| );
 | |
| 
 | |
| static DECLARE_TLV_DB_RANGE(sta350_limiter_drc_attack_tlv,
 | |
| 	0, 7, TLV_DB_SCALE_ITEM(-3100, 200, 0),
 | |
| 	8, 13, TLV_DB_SCALE_ITEM(-1600, 100, 0),
 | |
| 	14, 16, TLV_DB_SCALE_ITEM(-1000, 300, 0),
 | |
| );
 | |
| 
 | |
| static DECLARE_TLV_DB_RANGE(sta350_limiter_drc_release_tlv,
 | |
| 	0, 0, TLV_DB_SCALE_ITEM(TLV_DB_GAIN_MUTE, 0, 0),
 | |
| 	1, 2, TLV_DB_SCALE_ITEM(-3800, 200, 0),
 | |
| 	3, 4, TLV_DB_SCALE_ITEM(-3300, 200, 0),
 | |
| 	5, 12, TLV_DB_SCALE_ITEM(-3000, 200, 0),
 | |
| 	13, 16, TLV_DB_SCALE_ITEM(-1500, 300, 0),
 | |
| );
 | |
| 
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_drc_ac_enum,
 | |
| 			    STA350_CONFD, STA350_CONFD_DRC_SHIFT,
 | |
| 			    sta350_drc_ac);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_noise_shaper_enum,
 | |
| 			    STA350_CONFE, STA350_CONFE_NSBW_SHIFT,
 | |
| 			    sta350_noise_shaper_type);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_auto_gc_enum,
 | |
| 			    STA350_AUTO1, STA350_AUTO1_AMGC_SHIFT,
 | |
| 			    sta350_auto_gc_mode);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_auto_xo_enum,
 | |
| 			    STA350_AUTO2, STA350_AUTO2_XO_SHIFT,
 | |
| 			    sta350_auto_xo_mode);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch1_enum,
 | |
| 			    STA350_C1CFG, STA350_CxCFG_BO_SHIFT,
 | |
| 			    sta350_binary_output);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch2_enum,
 | |
| 			    STA350_C2CFG, STA350_CxCFG_BO_SHIFT,
 | |
| 			    sta350_binary_output);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_binary_output_ch3_enum,
 | |
| 			    STA350_C3CFG, STA350_CxCFG_BO_SHIFT,
 | |
| 			    sta350_binary_output);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch1_enum,
 | |
| 			    STA350_C1CFG, STA350_CxCFG_LS_SHIFT,
 | |
| 			    sta350_limiter_select);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch2_enum,
 | |
| 			    STA350_C2CFG, STA350_CxCFG_LS_SHIFT,
 | |
| 			    sta350_limiter_select);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter_ch3_enum,
 | |
| 			    STA350_C3CFG, STA350_CxCFG_LS_SHIFT,
 | |
| 			    sta350_limiter_select);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter1_attack_rate_enum,
 | |
| 			    STA350_L1AR, STA350_LxA_SHIFT,
 | |
| 			    sta350_limiter_attack_rate);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter2_attack_rate_enum,
 | |
| 			    STA350_L2AR, STA350_LxA_SHIFT,
 | |
| 			    sta350_limiter_attack_rate);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter1_release_rate_enum,
 | |
| 			    STA350_L1AR, STA350_LxR_SHIFT,
 | |
| 			    sta350_limiter_release_rate);
 | |
| static SOC_ENUM_SINGLE_DECL(sta350_limiter2_release_rate_enum,
 | |
| 			    STA350_L2AR, STA350_LxR_SHIFT,
 | |
| 			    sta350_limiter_release_rate);
 | |
| 
 | |
| /*
 | |
|  * byte array controls for setting biquad, mixer, scaling coefficients;
 | |
|  * for biquads all five coefficients need to be set in one go,
 | |
|  * mixer and pre/postscale coefs can be set individually;
 | |
|  * each coef is 24bit, the bytes are ordered in the same way
 | |
|  * as given in the STA350 data sheet (big endian; b1, b2, a1, a2, b0)
 | |
|  */
 | |
| 
 | |
| static int sta350_coefficient_info(struct snd_kcontrol *kcontrol,
 | |
| 				   struct snd_ctl_elem_info *uinfo)
 | |
| {
 | |
| 	int numcoef = kcontrol->private_value >> 16;
 | |
| 	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
 | |
| 	uinfo->count = 3 * numcoef;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sta350_coefficient_get(struct snd_kcontrol *kcontrol,
 | |
| 				  struct snd_ctl_elem_value *ucontrol)
 | |
| {
 | |
| 	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	int numcoef = kcontrol->private_value >> 16;
 | |
| 	int index = kcontrol->private_value & 0xffff;
 | |
| 	unsigned int cfud, val;
 | |
| 	int i, ret = 0;
 | |
| 
 | |
| 	mutex_lock(&sta350->coeff_lock);
 | |
| 
 | |
| 	/* preserve reserved bits in STA350_CFUD */
 | |
| 	regmap_read(sta350->regmap, STA350_CFUD, &cfud);
 | |
| 	cfud &= 0xf0;
 | |
| 	/*
 | |
| 	 * chip documentation does not say if the bits are self clearing,
 | |
| 	 * so do it explicitly
 | |
| 	 */
 | |
| 	regmap_write(sta350->regmap, STA350_CFUD, cfud);
 | |
| 
 | |
| 	regmap_write(sta350->regmap, STA350_CFADDR2, index);
 | |
| 	if (numcoef == 1) {
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x04);
 | |
| 	} else if (numcoef == 5) {
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x08);
 | |
| 	} else {
 | |
| 		ret = -EINVAL;
 | |
| 		goto exit_unlock;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < 3 * numcoef; i++) {
 | |
| 		regmap_read(sta350->regmap, STA350_B1CF1 + i, &val);
 | |
| 		ucontrol->value.bytes.data[i] = val;
 | |
| 	}
 | |
| 
 | |
| exit_unlock:
 | |
| 	mutex_unlock(&sta350->coeff_lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int sta350_coefficient_put(struct snd_kcontrol *kcontrol,
 | |
| 				  struct snd_ctl_elem_value *ucontrol)
 | |
| {
 | |
| 	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	int numcoef = kcontrol->private_value >> 16;
 | |
| 	int index = kcontrol->private_value & 0xffff;
 | |
| 	unsigned int cfud;
 | |
| 	int i;
 | |
| 
 | |
| 	/* preserve reserved bits in STA350_CFUD */
 | |
| 	regmap_read(sta350->regmap, STA350_CFUD, &cfud);
 | |
| 	cfud &= 0xf0;
 | |
| 	/*
 | |
| 	 * chip documentation does not say if the bits are self clearing,
 | |
| 	 * so do it explicitly
 | |
| 	 */
 | |
| 	regmap_write(sta350->regmap, STA350_CFUD, cfud);
 | |
| 
 | |
| 	regmap_write(sta350->regmap, STA350_CFADDR2, index);
 | |
| 	for (i = 0; i < numcoef && (index + i < STA350_COEF_COUNT); i++)
 | |
| 		sta350->coef_shadow[index + i] =
 | |
| 			  (ucontrol->value.bytes.data[3 * i] << 16)
 | |
| 			| (ucontrol->value.bytes.data[3 * i + 1] << 8)
 | |
| 			| (ucontrol->value.bytes.data[3 * i + 2]);
 | |
| 	for (i = 0; i < 3 * numcoef; i++)
 | |
| 		regmap_write(sta350->regmap, STA350_B1CF1 + i,
 | |
| 			     ucontrol->value.bytes.data[i]);
 | |
| 	if (numcoef == 1)
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x01);
 | |
| 	else if (numcoef == 5)
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x02);
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sta350_sync_coef_shadow(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	unsigned int cfud;
 | |
| 	int i;
 | |
| 
 | |
| 	/* preserve reserved bits in STA350_CFUD */
 | |
| 	regmap_read(sta350->regmap, STA350_CFUD, &cfud);
 | |
| 	cfud &= 0xf0;
 | |
| 
 | |
| 	for (i = 0; i < STA350_COEF_COUNT; i++) {
 | |
| 		regmap_write(sta350->regmap, STA350_CFADDR2, i);
 | |
| 		regmap_write(sta350->regmap, STA350_B1CF1,
 | |
| 			     (sta350->coef_shadow[i] >> 16) & 0xff);
 | |
| 		regmap_write(sta350->regmap, STA350_B1CF2,
 | |
| 			     (sta350->coef_shadow[i] >> 8) & 0xff);
 | |
| 		regmap_write(sta350->regmap, STA350_B1CF3,
 | |
| 			     (sta350->coef_shadow[i]) & 0xff);
 | |
| 		/*
 | |
| 		 * chip documentation does not say if the bits are
 | |
| 		 * self-clearing, so do it explicitly
 | |
| 		 */
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud);
 | |
| 		regmap_write(sta350->regmap, STA350_CFUD, cfud | 0x01);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sta350_cache_sync(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	unsigned int mute;
 | |
| 	int rc;
 | |
| 
 | |
| 	/* mute during register sync */
 | |
| 	regmap_read(sta350->regmap, STA350_CFUD, &mute);
 | |
| 	regmap_write(sta350->regmap, STA350_MMUTE, mute | STA350_MMUTE_MMUTE);
 | |
| 	sta350_sync_coef_shadow(component);
 | |
| 	rc = regcache_sync(sta350->regmap);
 | |
| 	regmap_write(sta350->regmap, STA350_MMUTE, mute);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| #define SINGLE_COEF(xname, index) \
 | |
| {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 | |
| 	.info = sta350_coefficient_info, \
 | |
| 	.get = sta350_coefficient_get,\
 | |
| 	.put = sta350_coefficient_put, \
 | |
| 	.private_value = index | (1 << 16) }
 | |
| 
 | |
| #define BIQUAD_COEFS(xname, index) \
 | |
| {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
 | |
| 	.info = sta350_coefficient_info, \
 | |
| 	.get = sta350_coefficient_get,\
 | |
| 	.put = sta350_coefficient_put, \
 | |
| 	.private_value = index | (5 << 16) }
 | |
| 
 | |
| static const struct snd_kcontrol_new sta350_snd_controls[] = {
 | |
| SOC_SINGLE_TLV("Master Volume", STA350_MVOL, 0, 0xff, 1, mvol_tlv),
 | |
| /* VOL */
 | |
| SOC_SINGLE_TLV("Ch1 Volume", STA350_C1VOL, 0, 0xff, 1, chvol_tlv),
 | |
| SOC_SINGLE_TLV("Ch2 Volume", STA350_C2VOL, 0, 0xff, 1, chvol_tlv),
 | |
| SOC_SINGLE_TLV("Ch3 Volume", STA350_C3VOL, 0, 0xff, 1, chvol_tlv),
 | |
| /* CONFD */
 | |
| SOC_SINGLE("High Pass Filter Bypass Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_HPB_SHIFT, 1, 1),
 | |
| SOC_SINGLE("De-emphasis Filter Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_DEMP_SHIFT, 1, 0),
 | |
| SOC_SINGLE("DSP Bypass Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_DSPB_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Post-scale Link Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_PSL_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Biquad Coefficient Link Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_BQL_SHIFT, 1, 0),
 | |
| SOC_ENUM("Compressor/Limiter Switch", sta350_drc_ac_enum),
 | |
| SOC_ENUM("Noise Shaper Bandwidth", sta350_noise_shaper_enum),
 | |
| SOC_SINGLE("Zero-detect Mute Enable Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_ZDE_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Submix Mode Switch",
 | |
| 	   STA350_CONFD, STA350_CONFD_SME_SHIFT, 1, 0),
 | |
| /* CONFE */
 | |
| SOC_SINGLE("Zero Cross Switch", STA350_CONFE, STA350_CONFE_ZCE_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Soft Ramp Switch", STA350_CONFE, STA350_CONFE_SVE_SHIFT, 1, 0),
 | |
| /* MUTE */
 | |
| SOC_SINGLE("Master Switch", STA350_MMUTE, STA350_MMUTE_MMUTE_SHIFT, 1, 1),
 | |
| SOC_SINGLE("Ch1 Switch", STA350_MMUTE, STA350_MMUTE_C1M_SHIFT, 1, 1),
 | |
| SOC_SINGLE("Ch2 Switch", STA350_MMUTE, STA350_MMUTE_C2M_SHIFT, 1, 1),
 | |
| SOC_SINGLE("Ch3 Switch", STA350_MMUTE, STA350_MMUTE_C3M_SHIFT, 1, 1),
 | |
| /* AUTOx */
 | |
| SOC_ENUM("Automode GC", sta350_auto_gc_enum),
 | |
| SOC_ENUM("Automode XO", sta350_auto_xo_enum),
 | |
| /* CxCFG */
 | |
| SOC_SINGLE("Ch1 Tone Control Bypass Switch",
 | |
| 	   STA350_C1CFG, STA350_CxCFG_TCB_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch2 Tone Control Bypass Switch",
 | |
| 	   STA350_C2CFG, STA350_CxCFG_TCB_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch1 EQ Bypass Switch",
 | |
| 	   STA350_C1CFG, STA350_CxCFG_EQBP_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch2 EQ Bypass Switch",
 | |
| 	   STA350_C2CFG, STA350_CxCFG_EQBP_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch1 Master Volume Bypass Switch",
 | |
| 	   STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch2 Master Volume Bypass Switch",
 | |
| 	   STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0),
 | |
| SOC_SINGLE("Ch3 Master Volume Bypass Switch",
 | |
| 	   STA350_C1CFG, STA350_CxCFG_VBP_SHIFT, 1, 0),
 | |
| SOC_ENUM("Ch1 Binary Output Select", sta350_binary_output_ch1_enum),
 | |
| SOC_ENUM("Ch2 Binary Output Select", sta350_binary_output_ch2_enum),
 | |
| SOC_ENUM("Ch3 Binary Output Select", sta350_binary_output_ch3_enum),
 | |
| SOC_ENUM("Ch1 Limiter Select", sta350_limiter_ch1_enum),
 | |
| SOC_ENUM("Ch2 Limiter Select", sta350_limiter_ch2_enum),
 | |
| SOC_ENUM("Ch3 Limiter Select", sta350_limiter_ch3_enum),
 | |
| /* TONE */
 | |
| SOC_SINGLE_RANGE_TLV("Bass Tone Control Volume",
 | |
| 		     STA350_TONE, STA350_TONE_BTC_SHIFT, 1, 13, 0, tone_tlv),
 | |
| SOC_SINGLE_RANGE_TLV("Treble Tone Control Volume",
 | |
| 		     STA350_TONE, STA350_TONE_TTC_SHIFT, 1, 13, 0, tone_tlv),
 | |
| SOC_ENUM("Limiter1 Attack Rate (dB/ms)", sta350_limiter1_attack_rate_enum),
 | |
| SOC_ENUM("Limiter2 Attack Rate (dB/ms)", sta350_limiter2_attack_rate_enum),
 | |
| SOC_ENUM("Limiter1 Release Rate (dB/ms)", sta350_limiter1_release_rate_enum),
 | |
| SOC_ENUM("Limiter2 Release Rate (dB/ms)", sta350_limiter2_release_rate_enum),
 | |
| 
 | |
| /*
 | |
|  * depending on mode, the attack/release thresholds have
 | |
|  * two different enum definitions; provide both
 | |
|  */
 | |
| SOC_SINGLE_TLV("Limiter1 Attack Threshold (AC Mode)",
 | |
| 	       STA350_L1ATRT, STA350_LxA_SHIFT,
 | |
| 	       16, 0, sta350_limiter_ac_attack_tlv),
 | |
| SOC_SINGLE_TLV("Limiter2 Attack Threshold (AC Mode)",
 | |
| 	       STA350_L2ATRT, STA350_LxA_SHIFT,
 | |
| 	       16, 0, sta350_limiter_ac_attack_tlv),
 | |
| SOC_SINGLE_TLV("Limiter1 Release Threshold (AC Mode)",
 | |
| 	       STA350_L1ATRT, STA350_LxR_SHIFT,
 | |
| 	       16, 0, sta350_limiter_ac_release_tlv),
 | |
| SOC_SINGLE_TLV("Limiter2 Release Threshold (AC Mode)",
 | |
| 	       STA350_L2ATRT, STA350_LxR_SHIFT,
 | |
| 	       16, 0, sta350_limiter_ac_release_tlv),
 | |
| SOC_SINGLE_TLV("Limiter1 Attack Threshold (DRC Mode)",
 | |
| 	       STA350_L1ATRT, STA350_LxA_SHIFT,
 | |
| 	       16, 0, sta350_limiter_drc_attack_tlv),
 | |
| SOC_SINGLE_TLV("Limiter2 Attack Threshold (DRC Mode)",
 | |
| 	       STA350_L2ATRT, STA350_LxA_SHIFT,
 | |
| 	       16, 0, sta350_limiter_drc_attack_tlv),
 | |
| SOC_SINGLE_TLV("Limiter1 Release Threshold (DRC Mode)",
 | |
| 	       STA350_L1ATRT, STA350_LxR_SHIFT,
 | |
| 	       16, 0, sta350_limiter_drc_release_tlv),
 | |
| SOC_SINGLE_TLV("Limiter2 Release Threshold (DRC Mode)",
 | |
| 	       STA350_L2ATRT, STA350_LxR_SHIFT,
 | |
| 	       16, 0, sta350_limiter_drc_release_tlv),
 | |
| 
 | |
| BIQUAD_COEFS("Ch1 - Biquad 1", 0),
 | |
| BIQUAD_COEFS("Ch1 - Biquad 2", 5),
 | |
| BIQUAD_COEFS("Ch1 - Biquad 3", 10),
 | |
| BIQUAD_COEFS("Ch1 - Biquad 4", 15),
 | |
| BIQUAD_COEFS("Ch2 - Biquad 1", 20),
 | |
| BIQUAD_COEFS("Ch2 - Biquad 2", 25),
 | |
| BIQUAD_COEFS("Ch2 - Biquad 3", 30),
 | |
| BIQUAD_COEFS("Ch2 - Biquad 4", 35),
 | |
| BIQUAD_COEFS("High-pass", 40),
 | |
| BIQUAD_COEFS("Low-pass", 45),
 | |
| SINGLE_COEF("Ch1 - Prescale", 50),
 | |
| SINGLE_COEF("Ch2 - Prescale", 51),
 | |
| SINGLE_COEF("Ch1 - Postscale", 52),
 | |
| SINGLE_COEF("Ch2 - Postscale", 53),
 | |
| SINGLE_COEF("Ch3 - Postscale", 54),
 | |
| SINGLE_COEF("Thermal warning - Postscale", 55),
 | |
| SINGLE_COEF("Ch1 - Mix 1", 56),
 | |
| SINGLE_COEF("Ch1 - Mix 2", 57),
 | |
| SINGLE_COEF("Ch2 - Mix 1", 58),
 | |
| SINGLE_COEF("Ch2 - Mix 2", 59),
 | |
| SINGLE_COEF("Ch3 - Mix 1", 60),
 | |
| SINGLE_COEF("Ch3 - Mix 2", 61),
 | |
| };
 | |
| 
 | |
| static const struct snd_soc_dapm_widget sta350_dapm_widgets[] = {
 | |
| SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 | |
| SND_SOC_DAPM_OUTPUT("LEFT"),
 | |
| SND_SOC_DAPM_OUTPUT("RIGHT"),
 | |
| SND_SOC_DAPM_OUTPUT("SUB"),
 | |
| };
 | |
| 
 | |
| static const struct snd_soc_dapm_route sta350_dapm_routes[] = {
 | |
| 	{ "LEFT", NULL, "DAC" },
 | |
| 	{ "RIGHT", NULL, "DAC" },
 | |
| 	{ "SUB", NULL, "DAC" },
 | |
| 	{ "DAC", NULL, "Playback" },
 | |
| };
 | |
| 
 | |
| /* MCLK interpolation ratio per fs */
 | |
| static struct {
 | |
| 	int fs;
 | |
| 	int ir;
 | |
| } interpolation_ratios[] = {
 | |
| 	{ 32000, 0 },
 | |
| 	{ 44100, 0 },
 | |
| 	{ 48000, 0 },
 | |
| 	{ 88200, 1 },
 | |
| 	{ 96000, 1 },
 | |
| 	{ 176400, 2 },
 | |
| 	{ 192000, 2 },
 | |
| };
 | |
| 
 | |
| /* MCLK to fs clock ratios */
 | |
| static int mcs_ratio_table[3][6] = {
 | |
| 	{ 768, 512, 384, 256, 128, 576 },
 | |
| 	{ 384, 256, 192, 128,  64,   0 },
 | |
| 	{ 192, 128,  96,  64,  32,   0 },
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * sta350_set_dai_sysclk - configure MCLK
 | |
|  * @codec_dai: the codec DAI
 | |
|  * @clk_id: the clock ID (ignored)
 | |
|  * @freq: the MCLK input frequency
 | |
|  * @dir: the clock direction (ignored)
 | |
|  *
 | |
|  * The value of MCLK is used to determine which sample rates are supported
 | |
|  * by the STA350, based on the mcs_ratio_table.
 | |
|  *
 | |
|  * This function must be called by the machine driver's 'startup' function,
 | |
|  * otherwise the list of supported sample rates will not be available in
 | |
|  * time for ALSA.
 | |
|  */
 | |
| static int sta350_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 | |
| 				 int clk_id, unsigned int freq, int dir)
 | |
| {
 | |
| 	struct snd_soc_component *component = codec_dai->component;
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 
 | |
| 	dev_dbg(component->dev, "mclk=%u\n", freq);
 | |
| 	sta350->mclk = freq;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * sta350_set_dai_fmt - configure the codec for the selected audio format
 | |
|  * @codec_dai: the codec DAI
 | |
|  * @fmt: a SND_SOC_DAIFMT_x value indicating the data format
 | |
|  *
 | |
|  * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
 | |
|  * codec accordingly.
 | |
|  */
 | |
| static int sta350_set_dai_fmt(struct snd_soc_dai *codec_dai,
 | |
| 			      unsigned int fmt)
 | |
| {
 | |
| 	struct snd_soc_component *component = codec_dai->component;
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	unsigned int confb = 0;
 | |
| 
 | |
| 	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
 | |
| 	case SND_SOC_DAIFMT_CBC_CFC:
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 | |
| 	case SND_SOC_DAIFMT_I2S:
 | |
| 	case SND_SOC_DAIFMT_RIGHT_J:
 | |
| 	case SND_SOC_DAIFMT_LEFT_J:
 | |
| 		sta350->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 | |
| 	case SND_SOC_DAIFMT_NB_NF:
 | |
| 		confb |= STA350_CONFB_C2IM;
 | |
| 		break;
 | |
| 	case SND_SOC_DAIFMT_NB_IF:
 | |
| 		confb |= STA350_CONFB_C1IM;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return regmap_update_bits(sta350->regmap, STA350_CONFB,
 | |
| 				  STA350_CONFB_C1IM | STA350_CONFB_C2IM, confb);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * sta350_hw_params - program the STA350 with the given hardware parameters.
 | |
|  * @substream: the audio stream
 | |
|  * @params: the hardware parameters to set
 | |
|  * @dai: the SOC DAI (ignored)
 | |
|  *
 | |
|  * This function programs the hardware with the values provided.
 | |
|  * Specifically, the sample rate and the data format.
 | |
|  */
 | |
| static int sta350_hw_params(struct snd_pcm_substream *substream,
 | |
| 			    struct snd_pcm_hw_params *params,
 | |
| 			    struct snd_soc_dai *dai)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	int i, mcs = -EINVAL, ir = -EINVAL;
 | |
| 	unsigned int confa, confb;
 | |
| 	unsigned int rate, ratio;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!sta350->mclk) {
 | |
| 		dev_err(component->dev,
 | |
| 			"sta350->mclk is unset. Unable to determine ratio\n");
 | |
| 		return -EIO;
 | |
| 	}
 | |
| 
 | |
| 	rate = params_rate(params);
 | |
| 	ratio = sta350->mclk / rate;
 | |
| 	dev_dbg(component->dev, "rate: %u, ratio: %u\n", rate, ratio);
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(interpolation_ratios); i++) {
 | |
| 		if (interpolation_ratios[i].fs == rate) {
 | |
| 			ir = interpolation_ratios[i].ir;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (ir < 0) {
 | |
| 		dev_err(component->dev, "Unsupported samplerate: %u\n", rate);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < 6; i++) {
 | |
| 		if (mcs_ratio_table[ir][i] == ratio) {
 | |
| 			mcs = i;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (mcs < 0) {
 | |
| 		dev_err(component->dev, "Unresolvable ratio: %u\n", ratio);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	confa = (ir << STA350_CONFA_IR_SHIFT) |
 | |
| 		(mcs << STA350_CONFA_MCS_SHIFT);
 | |
| 	confb = 0;
 | |
| 
 | |
| 	switch (params_width(params)) {
 | |
| 	case 24:
 | |
| 		dev_dbg(component->dev, "24bit\n");
 | |
| 		fallthrough;
 | |
| 	case 32:
 | |
| 		dev_dbg(component->dev, "24bit or 32bit\n");
 | |
| 		switch (sta350->format) {
 | |
| 		case SND_SOC_DAIFMT_I2S:
 | |
| 			confb |= 0x0;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_LEFT_J:
 | |
| 			confb |= 0x1;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_RIGHT_J:
 | |
| 			confb |= 0x2;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		break;
 | |
| 	case 20:
 | |
| 		dev_dbg(component->dev, "20bit\n");
 | |
| 		switch (sta350->format) {
 | |
| 		case SND_SOC_DAIFMT_I2S:
 | |
| 			confb |= 0x4;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_LEFT_J:
 | |
| 			confb |= 0x5;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_RIGHT_J:
 | |
| 			confb |= 0x6;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		break;
 | |
| 	case 18:
 | |
| 		dev_dbg(component->dev, "18bit\n");
 | |
| 		switch (sta350->format) {
 | |
| 		case SND_SOC_DAIFMT_I2S:
 | |
| 			confb |= 0x8;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_LEFT_J:
 | |
| 			confb |= 0x9;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_RIGHT_J:
 | |
| 			confb |= 0xa;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		break;
 | |
| 	case 16:
 | |
| 		dev_dbg(component->dev, "16bit\n");
 | |
| 		switch (sta350->format) {
 | |
| 		case SND_SOC_DAIFMT_I2S:
 | |
| 			confb |= 0x0;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_LEFT_J:
 | |
| 			confb |= 0xd;
 | |
| 			break;
 | |
| 		case SND_SOC_DAIFMT_RIGHT_J:
 | |
| 			confb |= 0xe;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_update_bits(sta350->regmap, STA350_CONFA,
 | |
| 				 STA350_CONFA_MCS_MASK | STA350_CONFA_IR_MASK,
 | |
| 				 confa);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = regmap_update_bits(sta350->regmap, STA350_CONFB,
 | |
| 				 STA350_CONFB_SAI_MASK | STA350_CONFB_SAIFB,
 | |
| 				 confb);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sta350_startup_sequence(struct sta350_priv *sta350)
 | |
| {
 | |
| 	if (sta350->gpiod_power_down)
 | |
| 		gpiod_set_value(sta350->gpiod_power_down, 1);
 | |
| 
 | |
| 	if (sta350->gpiod_nreset) {
 | |
| 		gpiod_set_value(sta350->gpiod_nreset, 0);
 | |
| 		mdelay(1);
 | |
| 		gpiod_set_value(sta350->gpiod_nreset, 1);
 | |
| 		mdelay(1);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * sta350_set_bias_level - DAPM callback
 | |
|  * @component: the component device
 | |
|  * @level: DAPM power level
 | |
|  *
 | |
|  * This is called by ALSA to put the component into low power mode
 | |
|  * or to wake it up.  If the component is powered off completely
 | |
|  * all registers must be restored after power on.
 | |
|  */
 | |
| static int sta350_set_bias_level(struct snd_soc_component *component,
 | |
| 				 enum snd_soc_bias_level level)
 | |
| {
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	int ret;
 | |
| 
 | |
| 	dev_dbg(component->dev, "level = %d\n", level);
 | |
| 	switch (level) {
 | |
| 	case SND_SOC_BIAS_ON:
 | |
| 		break;
 | |
| 
 | |
| 	case SND_SOC_BIAS_PREPARE:
 | |
| 		/* Full power on */
 | |
| 		regmap_update_bits(sta350->regmap, STA350_CONFF,
 | |
| 				   STA350_CONFF_PWDN | STA350_CONFF_EAPD,
 | |
| 				   STA350_CONFF_PWDN | STA350_CONFF_EAPD);
 | |
| 		break;
 | |
| 
 | |
| 	case SND_SOC_BIAS_STANDBY:
 | |
| 		if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
 | |
| 			ret = regulator_bulk_enable(
 | |
| 				ARRAY_SIZE(sta350->supplies),
 | |
| 				sta350->supplies);
 | |
| 			if (ret < 0) {
 | |
| 				dev_err(component->dev,
 | |
| 					"Failed to enable supplies: %d\n",
 | |
| 					ret);
 | |
| 				return ret;
 | |
| 			}
 | |
| 			sta350_startup_sequence(sta350);
 | |
| 			sta350_cache_sync(component);
 | |
| 		}
 | |
| 
 | |
| 		/* Power down */
 | |
| 		regmap_update_bits(sta350->regmap, STA350_CONFF,
 | |
| 				   STA350_CONFF_PWDN | STA350_CONFF_EAPD,
 | |
| 				   0);
 | |
| 
 | |
| 		break;
 | |
| 
 | |
| 	case SND_SOC_BIAS_OFF:
 | |
| 		/* The chip runs through the power down sequence for us */
 | |
| 		regmap_update_bits(sta350->regmap, STA350_CONFF,
 | |
| 				   STA350_CONFF_PWDN | STA350_CONFF_EAPD, 0);
 | |
| 
 | |
| 		/* power down: low */
 | |
| 		if (sta350->gpiod_power_down)
 | |
| 			gpiod_set_value(sta350->gpiod_power_down, 0);
 | |
| 
 | |
| 		if (sta350->gpiod_nreset)
 | |
| 			gpiod_set_value(sta350->gpiod_nreset, 0);
 | |
| 
 | |
| 		regulator_bulk_disable(ARRAY_SIZE(sta350->supplies),
 | |
| 				       sta350->supplies);
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct snd_soc_dai_ops sta350_dai_ops = {
 | |
| 	.hw_params	= sta350_hw_params,
 | |
| 	.set_sysclk	= sta350_set_dai_sysclk,
 | |
| 	.set_fmt	= sta350_set_dai_fmt,
 | |
| };
 | |
| 
 | |
| static struct snd_soc_dai_driver sta350_dai = {
 | |
| 	.name = "sta350-hifi",
 | |
| 	.playback = {
 | |
| 		.stream_name = "Playback",
 | |
| 		.channels_min = 2,
 | |
| 		.channels_max = 2,
 | |
| 		.rates = STA350_RATES,
 | |
| 		.formats = STA350_FORMATS,
 | |
| 	},
 | |
| 	.ops = &sta350_dai_ops,
 | |
| };
 | |
| 
 | |
| static int sta350_probe(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 	struct sta350_platform_data *pdata = sta350->pdata;
 | |
| 	int i, ret = 0, thermal = 0;
 | |
| 
 | |
| 	ret = regulator_bulk_enable(ARRAY_SIZE(sta350->supplies),
 | |
| 				    sta350->supplies);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(component->dev, "Failed to enable supplies: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = sta350_startup_sequence(sta350);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(component->dev, "Failed to startup device\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* CONFA */
 | |
| 	if (!pdata->thermal_warning_recovery)
 | |
| 		thermal |= STA350_CONFA_TWAB;
 | |
| 	if (!pdata->thermal_warning_adjustment)
 | |
| 		thermal |= STA350_CONFA_TWRB;
 | |
| 	if (!pdata->fault_detect_recovery)
 | |
| 		thermal |= STA350_CONFA_FDRB;
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFA,
 | |
| 			   STA350_CONFA_TWAB | STA350_CONFA_TWRB |
 | |
| 			   STA350_CONFA_FDRB,
 | |
| 			   thermal);
 | |
| 
 | |
| 	/* CONFC */
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFC,
 | |
| 			   STA350_CONFC_OM_MASK,
 | |
| 			   pdata->ffx_power_output_mode
 | |
| 				<< STA350_CONFC_OM_SHIFT);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFC,
 | |
| 			   STA350_CONFC_CSZ_MASK,
 | |
| 			   pdata->drop_compensation_ns
 | |
| 				<< STA350_CONFC_CSZ_SHIFT);
 | |
| 	regmap_update_bits(sta350->regmap,
 | |
| 			   STA350_CONFC,
 | |
| 			   STA350_CONFC_OCRB,
 | |
| 			   pdata->oc_warning_adjustment ?
 | |
| 				STA350_CONFC_OCRB : 0);
 | |
| 
 | |
| 	/* CONFE */
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFE,
 | |
| 			   STA350_CONFE_MPCV,
 | |
| 			   pdata->max_power_use_mpcc ?
 | |
| 				STA350_CONFE_MPCV : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFE,
 | |
| 			   STA350_CONFE_MPC,
 | |
| 			   pdata->max_power_correction ?
 | |
| 				STA350_CONFE_MPC : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFE,
 | |
| 			   STA350_CONFE_AME,
 | |
| 			   pdata->am_reduction_mode ?
 | |
| 				STA350_CONFE_AME : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFE,
 | |
| 			   STA350_CONFE_PWMS,
 | |
| 			   pdata->odd_pwm_speed_mode ?
 | |
| 				STA350_CONFE_PWMS : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFE,
 | |
| 			   STA350_CONFE_DCCV,
 | |
| 			   pdata->distortion_compensation ?
 | |
| 				STA350_CONFE_DCCV : 0);
 | |
| 	/*  CONFF */
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFF,
 | |
| 			   STA350_CONFF_IDE,
 | |
| 			   pdata->invalid_input_detect_mute ?
 | |
| 				STA350_CONFF_IDE : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_CONFF,
 | |
| 			   STA350_CONFF_OCFG_MASK,
 | |
| 			   pdata->output_conf
 | |
| 				<< STA350_CONFF_OCFG_SHIFT);
 | |
| 
 | |
| 	/* channel to output mapping */
 | |
| 	regmap_update_bits(sta350->regmap, STA350_C1CFG,
 | |
| 			   STA350_CxCFG_OM_MASK,
 | |
| 			   pdata->ch1_output_mapping
 | |
| 				<< STA350_CxCFG_OM_SHIFT);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_C2CFG,
 | |
| 			   STA350_CxCFG_OM_MASK,
 | |
| 			   pdata->ch2_output_mapping
 | |
| 				<< STA350_CxCFG_OM_SHIFT);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_C3CFG,
 | |
| 			   STA350_CxCFG_OM_MASK,
 | |
| 			   pdata->ch3_output_mapping
 | |
| 				<< STA350_CxCFG_OM_SHIFT);
 | |
| 
 | |
| 	/* miscellaneous registers */
 | |
| 	regmap_update_bits(sta350->regmap, STA350_MISC1,
 | |
| 			   STA350_MISC1_CPWMEN,
 | |
| 			   pdata->activate_mute_output ?
 | |
| 				STA350_MISC1_CPWMEN : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_MISC1,
 | |
| 			   STA350_MISC1_BRIDGOFF,
 | |
| 			   pdata->bridge_immediate_off ?
 | |
| 				STA350_MISC1_BRIDGOFF : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_MISC1,
 | |
| 			   STA350_MISC1_NSHHPEN,
 | |
| 			   pdata->noise_shape_dc_cut ?
 | |
| 				STA350_MISC1_NSHHPEN : 0);
 | |
| 	regmap_update_bits(sta350->regmap, STA350_MISC1,
 | |
| 			   STA350_MISC1_RPDNEN,
 | |
| 			   pdata->powerdown_master_vol ?
 | |
| 				STA350_MISC1_RPDNEN: 0);
 | |
| 
 | |
| 	regmap_update_bits(sta350->regmap, STA350_MISC2,
 | |
| 			   STA350_MISC2_PNDLSL_MASK,
 | |
| 			   pdata->powerdown_delay_divider
 | |
| 				<< STA350_MISC2_PNDLSL_SHIFT);
 | |
| 
 | |
| 	/* initialize coefficient shadow RAM with reset values */
 | |
| 	for (i = 4; i <= 49; i += 5)
 | |
| 		sta350->coef_shadow[i] = 0x400000;
 | |
| 	for (i = 50; i <= 54; i++)
 | |
| 		sta350->coef_shadow[i] = 0x7fffff;
 | |
| 	sta350->coef_shadow[55] = 0x5a9df7;
 | |
| 	sta350->coef_shadow[56] = 0x7fffff;
 | |
| 	sta350->coef_shadow[59] = 0x7fffff;
 | |
| 	sta350->coef_shadow[60] = 0x400000;
 | |
| 	sta350->coef_shadow[61] = 0x400000;
 | |
| 
 | |
| 	snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY);
 | |
| 	/* Bias level configuration will have done an extra enable */
 | |
| 	regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), sta350->supplies);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void sta350_remove(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct sta350_priv *sta350 = snd_soc_component_get_drvdata(component);
 | |
| 
 | |
| 	regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), sta350->supplies);
 | |
| }
 | |
| 
 | |
| static const struct snd_soc_component_driver sta350_component = {
 | |
| 	.probe			= sta350_probe,
 | |
| 	.remove			= sta350_remove,
 | |
| 	.set_bias_level		= sta350_set_bias_level,
 | |
| 	.controls		= sta350_snd_controls,
 | |
| 	.num_controls		= ARRAY_SIZE(sta350_snd_controls),
 | |
| 	.dapm_widgets		= sta350_dapm_widgets,
 | |
| 	.num_dapm_widgets	= ARRAY_SIZE(sta350_dapm_widgets),
 | |
| 	.dapm_routes		= sta350_dapm_routes,
 | |
| 	.num_dapm_routes	= ARRAY_SIZE(sta350_dapm_routes),
 | |
| 	.suspend_bias_off	= 1,
 | |
| 	.idle_bias_on		= 1,
 | |
| 	.use_pmdown_time	= 1,
 | |
| 	.endianness		= 1,
 | |
| };
 | |
| 
 | |
| static const struct regmap_config sta350_regmap = {
 | |
| 	.reg_bits =		8,
 | |
| 	.val_bits =		8,
 | |
| 	.max_register =		STA350_MISC2,
 | |
| 	.reg_defaults =		sta350_regs,
 | |
| 	.num_reg_defaults =	ARRAY_SIZE(sta350_regs),
 | |
| 	.cache_type =		REGCACHE_RBTREE,
 | |
| 	.wr_table =		&sta350_write_regs,
 | |
| 	.rd_table =		&sta350_read_regs,
 | |
| 	.volatile_table =	&sta350_volatile_regs,
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id st350_dt_ids[] = {
 | |
| 	{ .compatible = "st,sta350", },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, st350_dt_ids);
 | |
| 
 | |
| static const char * const sta350_ffx_modes[] = {
 | |
| 	[STA350_FFX_PM_DROP_COMP]		= "drop-compensation",
 | |
| 	[STA350_FFX_PM_TAPERED_COMP]		= "tapered-compensation",
 | |
| 	[STA350_FFX_PM_FULL_POWER]		= "full-power-mode",
 | |
| 	[STA350_FFX_PM_VARIABLE_DROP_COMP]	= "variable-drop-compensation",
 | |
| };
 | |
| 
 | |
| static int sta350_probe_dt(struct device *dev, struct sta350_priv *sta350)
 | |
| {
 | |
| 	struct device_node *np = dev->of_node;
 | |
| 	struct sta350_platform_data *pdata;
 | |
| 	const char *ffx_power_mode;
 | |
| 	u16 tmp;
 | |
| 	u8 tmp8;
 | |
| 
 | |
| 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 	if (!pdata)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	of_property_read_u8(np, "st,output-conf",
 | |
| 			    &pdata->output_conf);
 | |
| 	of_property_read_u8(np, "st,ch1-output-mapping",
 | |
| 			    &pdata->ch1_output_mapping);
 | |
| 	of_property_read_u8(np, "st,ch2-output-mapping",
 | |
| 			    &pdata->ch2_output_mapping);
 | |
| 	of_property_read_u8(np, "st,ch3-output-mapping",
 | |
| 			    &pdata->ch3_output_mapping);
 | |
| 
 | |
| 	pdata->thermal_warning_recovery =
 | |
| 		of_property_read_bool(np, "st,thermal-warning-recovery");
 | |
| 	pdata->thermal_warning_adjustment =
 | |
| 		of_property_read_bool(np, "st,thermal-warning-adjustment");
 | |
| 	pdata->fault_detect_recovery =
 | |
| 		of_property_read_bool(np, "st,fault-detect-recovery");
 | |
| 
 | |
| 	pdata->ffx_power_output_mode = STA350_FFX_PM_VARIABLE_DROP_COMP;
 | |
| 	if (!of_property_read_string(np, "st,ffx-power-output-mode",
 | |
| 				     &ffx_power_mode)) {
 | |
| 		int i, mode = -EINVAL;
 | |
| 
 | |
| 		for (i = 0; i < ARRAY_SIZE(sta350_ffx_modes); i++)
 | |
| 			if (!strcasecmp(ffx_power_mode, sta350_ffx_modes[i]))
 | |
| 				mode = i;
 | |
| 
 | |
| 		if (mode < 0)
 | |
| 			dev_warn(dev, "Unsupported ffx output mode: %s\n",
 | |
| 				 ffx_power_mode);
 | |
| 		else
 | |
| 			pdata->ffx_power_output_mode = mode;
 | |
| 	}
 | |
| 
 | |
| 	tmp = 140;
 | |
| 	of_property_read_u16(np, "st,drop-compensation-ns", &tmp);
 | |
| 	pdata->drop_compensation_ns = clamp_t(u16, tmp, 0, 300) / 20;
 | |
| 
 | |
| 	pdata->oc_warning_adjustment =
 | |
| 		of_property_read_bool(np, "st,overcurrent-warning-adjustment");
 | |
| 
 | |
| 	/* CONFE */
 | |
| 	pdata->max_power_use_mpcc =
 | |
| 		of_property_read_bool(np, "st,max-power-use-mpcc");
 | |
| 	pdata->max_power_correction =
 | |
| 		of_property_read_bool(np, "st,max-power-correction");
 | |
| 	pdata->am_reduction_mode =
 | |
| 		of_property_read_bool(np, "st,am-reduction-mode");
 | |
| 	pdata->odd_pwm_speed_mode =
 | |
| 		of_property_read_bool(np, "st,odd-pwm-speed-mode");
 | |
| 	pdata->distortion_compensation =
 | |
| 		of_property_read_bool(np, "st,distortion-compensation");
 | |
| 
 | |
| 	/* CONFF */
 | |
| 	pdata->invalid_input_detect_mute =
 | |
| 		of_property_read_bool(np, "st,invalid-input-detect-mute");
 | |
| 
 | |
| 	/* MISC */
 | |
| 	pdata->activate_mute_output =
 | |
| 		of_property_read_bool(np, "st,activate-mute-output");
 | |
| 	pdata->bridge_immediate_off =
 | |
| 		of_property_read_bool(np, "st,bridge-immediate-off");
 | |
| 	pdata->noise_shape_dc_cut =
 | |
| 		of_property_read_bool(np, "st,noise-shape-dc-cut");
 | |
| 	pdata->powerdown_master_vol =
 | |
| 		of_property_read_bool(np, "st,powerdown-master-volume");
 | |
| 
 | |
| 	if (!of_property_read_u8(np, "st,powerdown-delay-divider", &tmp8)) {
 | |
| 		if (is_power_of_2(tmp8) && tmp8 >= 1 && tmp8 <= 128)
 | |
| 			pdata->powerdown_delay_divider = ilog2(tmp8);
 | |
| 		else
 | |
| 			dev_warn(dev, "Unsupported powerdown delay divider %d\n",
 | |
| 				 tmp8);
 | |
| 	}
 | |
| 
 | |
| 	sta350->pdata = pdata;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int sta350_i2c_probe(struct i2c_client *i2c)
 | |
| {
 | |
| 	struct device *dev = &i2c->dev;
 | |
| 	struct sta350_priv *sta350;
 | |
| 	int ret, i;
 | |
| 
 | |
| 	sta350 = devm_kzalloc(dev, sizeof(struct sta350_priv), GFP_KERNEL);
 | |
| 	if (!sta350)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	mutex_init(&sta350->coeff_lock);
 | |
| 	sta350->pdata = dev_get_platdata(dev);
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| 	if (dev->of_node) {
 | |
| 		ret = sta350_probe_dt(dev, sta350);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	/* GPIOs */
 | |
| 	sta350->gpiod_nreset = devm_gpiod_get_optional(dev, "reset",
 | |
| 						       GPIOD_OUT_LOW);
 | |
| 	if (IS_ERR(sta350->gpiod_nreset))
 | |
| 		return PTR_ERR(sta350->gpiod_nreset);
 | |
| 
 | |
| 	sta350->gpiod_power_down = devm_gpiod_get_optional(dev, "power-down",
 | |
| 							   GPIOD_OUT_LOW);
 | |
| 	if (IS_ERR(sta350->gpiod_power_down))
 | |
| 		return PTR_ERR(sta350->gpiod_power_down);
 | |
| 
 | |
| 	/* regulators */
 | |
| 	for (i = 0; i < ARRAY_SIZE(sta350->supplies); i++)
 | |
| 		sta350->supplies[i].supply = sta350_supply_names[i];
 | |
| 
 | |
| 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sta350->supplies),
 | |
| 				      sta350->supplies);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "Failed to request supplies: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	sta350->regmap = devm_regmap_init_i2c(i2c, &sta350_regmap);
 | |
| 	if (IS_ERR(sta350->regmap)) {
 | |
| 		ret = PTR_ERR(sta350->regmap);
 | |
| 		dev_err(dev, "Failed to init regmap: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	i2c_set_clientdata(i2c, sta350);
 | |
| 
 | |
| 	ret = devm_snd_soc_register_component(dev, &sta350_component, &sta350_dai, 1);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(dev, "Failed to register component (%d)\n", ret);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void sta350_i2c_remove(struct i2c_client *client)
 | |
| {}
 | |
| 
 | |
| static const struct i2c_device_id sta350_i2c_id[] = {
 | |
| 	{ "sta350", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, sta350_i2c_id);
 | |
| 
 | |
| static struct i2c_driver sta350_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "sta350",
 | |
| 		.of_match_table = of_match_ptr(st350_dt_ids),
 | |
| 	},
 | |
| 	.probe_new = sta350_i2c_probe,
 | |
| 	.remove =   sta350_i2c_remove,
 | |
| 	.id_table = sta350_i2c_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(sta350_i2c_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("ASoC STA350 driver");
 | |
| MODULE_AUTHOR("Sven Brandau <info@brandau.biz>");
 | |
| MODULE_LICENSE("GPL");
 |