1295 lines
33 KiB
C
1295 lines
33 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Gas Gauge driver for SBS Compliant Batteries
|
|
*
|
|
* Copyright (c) 2010, NVIDIA Corporation.
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/devm-helpers.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/power/sbs-battery.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/stat.h>
|
|
|
|
enum {
|
|
REG_MANUFACTURER_DATA,
|
|
REG_BATTERY_MODE,
|
|
REG_TEMPERATURE,
|
|
REG_VOLTAGE,
|
|
REG_CURRENT_NOW,
|
|
REG_CURRENT_AVG,
|
|
REG_MAX_ERR,
|
|
REG_CAPACITY,
|
|
REG_TIME_TO_EMPTY_NOW,
|
|
REG_TIME_TO_EMPTY_AVG,
|
|
REG_TIME_TO_FULL_AVG,
|
|
REG_STATUS,
|
|
REG_CAPACITY_LEVEL,
|
|
REG_CYCLE_COUNT,
|
|
REG_SERIAL_NUMBER,
|
|
REG_REMAINING_CAPACITY,
|
|
REG_REMAINING_CAPACITY_CHARGE,
|
|
REG_FULL_CHARGE_CAPACITY,
|
|
REG_FULL_CHARGE_CAPACITY_CHARGE,
|
|
REG_DESIGN_CAPACITY,
|
|
REG_DESIGN_CAPACITY_CHARGE,
|
|
REG_DESIGN_VOLTAGE_MIN,
|
|
REG_DESIGN_VOLTAGE_MAX,
|
|
REG_CHEMISTRY,
|
|
REG_MANUFACTURER,
|
|
REG_MODEL_NAME,
|
|
REG_CHARGE_CURRENT,
|
|
REG_CHARGE_VOLTAGE,
|
|
};
|
|
|
|
#define REG_ADDR_SPEC_INFO 0x1A
|
|
#define SPEC_INFO_VERSION_MASK GENMASK(7, 4)
|
|
#define SPEC_INFO_VERSION_SHIFT 4
|
|
|
|
#define SBS_VERSION_1_0 1
|
|
#define SBS_VERSION_1_1 2
|
|
#define SBS_VERSION_1_1_WITH_PEC 3
|
|
|
|
#define REG_ADDR_MANUFACTURE_DATE 0x1B
|
|
|
|
/* Battery Mode defines */
|
|
#define BATTERY_MODE_OFFSET 0x03
|
|
#define BATTERY_MODE_CAPACITY_MASK BIT(15)
|
|
enum sbs_capacity_mode {
|
|
CAPACITY_MODE_AMPS = 0,
|
|
CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
|
|
};
|
|
#define BATTERY_MODE_CHARGER_MASK (1<<14)
|
|
|
|
/* manufacturer access defines */
|
|
#define MANUFACTURER_ACCESS_STATUS 0x0006
|
|
#define MANUFACTURER_ACCESS_SLEEP 0x0011
|
|
|
|
/* battery status value bits */
|
|
#define BATTERY_INITIALIZED 0x80
|
|
#define BATTERY_DISCHARGING 0x40
|
|
#define BATTERY_FULL_CHARGED 0x20
|
|
#define BATTERY_FULL_DISCHARGED 0x10
|
|
|
|
/* min_value and max_value are only valid for numerical data */
|
|
#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
|
|
.psp = _psp, \
|
|
.addr = _addr, \
|
|
.min_value = _min_value, \
|
|
.max_value = _max_value, \
|
|
}
|
|
|
|
static const struct chip_data {
|
|
enum power_supply_property psp;
|
|
u8 addr;
|
|
int min_value;
|
|
int max_value;
|
|
} sbs_data[] = {
|
|
[REG_MANUFACTURER_DATA] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
|
|
[REG_BATTERY_MODE] =
|
|
SBS_DATA(-1, 0x03, 0, 65535),
|
|
[REG_TEMPERATURE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
|
|
[REG_VOLTAGE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 65535),
|
|
[REG_CURRENT_NOW] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
|
|
[REG_CURRENT_AVG] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767),
|
|
[REG_MAX_ERR] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100),
|
|
[REG_CAPACITY] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100),
|
|
[REG_REMAINING_CAPACITY] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
|
|
[REG_REMAINING_CAPACITY_CHARGE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
|
|
[REG_FULL_CHARGE_CAPACITY] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
|
|
[REG_FULL_CHARGE_CAPACITY_CHARGE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
|
|
[REG_TIME_TO_EMPTY_NOW] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, 0x11, 0, 65535),
|
|
[REG_TIME_TO_EMPTY_AVG] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
|
|
[REG_TIME_TO_FULL_AVG] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
|
|
[REG_CHARGE_CURRENT] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535),
|
|
[REG_CHARGE_VOLTAGE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535),
|
|
[REG_STATUS] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
|
|
[REG_CAPACITY_LEVEL] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
|
|
[REG_CYCLE_COUNT] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
|
|
[REG_DESIGN_CAPACITY] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
|
|
[REG_DESIGN_CAPACITY_CHARGE] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
|
|
[REG_DESIGN_VOLTAGE_MIN] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
|
|
[REG_DESIGN_VOLTAGE_MAX] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
|
|
[REG_SERIAL_NUMBER] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
|
|
/* Properties of type `const char *' */
|
|
[REG_MANUFACTURER] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
|
|
[REG_MODEL_NAME] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535),
|
|
[REG_CHEMISTRY] =
|
|
SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535)
|
|
};
|
|
|
|
static const enum power_supply_property sbs_properties[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_CAPACITY_LEVEL,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_TECHNOLOGY,
|
|
POWER_SUPPLY_PROP_CYCLE_COUNT,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_AVG,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
|
|
POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
|
|
POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
|
|
POWER_SUPPLY_PROP_SERIAL_NUMBER,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
|
|
POWER_SUPPLY_PROP_ENERGY_NOW,
|
|
POWER_SUPPLY_PROP_ENERGY_FULL,
|
|
POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
|
|
POWER_SUPPLY_PROP_CHARGE_NOW,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
|
|
POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
|
|
POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
|
|
POWER_SUPPLY_PROP_MANUFACTURE_DAY,
|
|
/* Properties of type `const char *' */
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
POWER_SUPPLY_PROP_MODEL_NAME
|
|
};
|
|
|
|
/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
|
|
#define SBS_FLAGS_TI_BQ20ZX5 BIT(0)
|
|
|
|
static const enum power_supply_property string_properties[] = {
|
|
POWER_SUPPLY_PROP_TECHNOLOGY,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
};
|
|
|
|
#define NR_STRING_BUFFERS ARRAY_SIZE(string_properties)
|
|
|
|
struct sbs_info {
|
|
struct i2c_client *client;
|
|
struct power_supply *power_supply;
|
|
bool is_present;
|
|
struct gpio_desc *gpio_detect;
|
|
bool charger_broadcasts;
|
|
int last_state;
|
|
int poll_time;
|
|
u32 i2c_retry_count;
|
|
u32 poll_retry_count;
|
|
struct delayed_work work;
|
|
struct mutex mode_lock;
|
|
u32 flags;
|
|
int technology;
|
|
char strings[NR_STRING_BUFFERS][I2C_SMBUS_BLOCK_MAX + 1];
|
|
};
|
|
|
|
static char *sbs_get_string_buf(struct sbs_info *chip,
|
|
enum power_supply_property psp)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < NR_STRING_BUFFERS; i++)
|
|
if (string_properties[i] == psp)
|
|
return chip->strings[i];
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
static void sbs_invalidate_cached_props(struct sbs_info *chip)
|
|
{
|
|
int i = 0;
|
|
|
|
chip->technology = -1;
|
|
|
|
for (i = 0; i < NR_STRING_BUFFERS; i++)
|
|
chip->strings[i][0] = 0;
|
|
}
|
|
|
|
static bool force_load;
|
|
|
|
static int sbs_read_word_data(struct i2c_client *client, u8 address);
|
|
static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
|
|
|
|
static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
|
|
{
|
|
int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
|
|
if (val < 0)
|
|
goto exit;
|
|
|
|
val |= BATTERY_MODE_CHARGER_MASK;
|
|
|
|
val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
|
|
|
|
exit:
|
|
if (val < 0)
|
|
dev_err(&chip->client->dev,
|
|
"Failed to disable charger broadcasting: %d\n", val);
|
|
else
|
|
dev_dbg(&chip->client->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static int sbs_update_presence(struct sbs_info *chip, bool is_present)
|
|
{
|
|
struct i2c_client *client = chip->client;
|
|
int retries = chip->i2c_retry_count;
|
|
s32 ret = 0;
|
|
u8 version;
|
|
|
|
if (chip->is_present == is_present)
|
|
return 0;
|
|
|
|
if (!is_present) {
|
|
chip->is_present = false;
|
|
/* Disable PEC when no device is present */
|
|
client->flags &= ~I2C_CLIENT_PEC;
|
|
sbs_invalidate_cached_props(chip);
|
|
return 0;
|
|
}
|
|
|
|
/* Check if device supports packet error checking and use it */
|
|
while (retries > 0) {
|
|
ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
|
|
if (ret >= 0)
|
|
break;
|
|
|
|
/*
|
|
* Some batteries trigger the detection pin before the
|
|
* I2C bus is properly connected. This works around the
|
|
* issue.
|
|
*/
|
|
msleep(100);
|
|
|
|
retries--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
|
|
|
|
/* fallback to old behaviour */
|
|
client->flags &= ~I2C_CLIENT_PEC;
|
|
chip->is_present = true;
|
|
|
|
return ret;
|
|
}
|
|
|
|
version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
|
|
|
|
if (version == SBS_VERSION_1_1_WITH_PEC)
|
|
client->flags |= I2C_CLIENT_PEC;
|
|
else
|
|
client->flags &= ~I2C_CLIENT_PEC;
|
|
|
|
if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel")
|
|
&& client->flags & I2C_CLIENT_PEC) {
|
|
dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n");
|
|
client->flags &= ~I2C_CLIENT_PEC;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
|
|
"enabled" : "disabled");
|
|
|
|
if (!chip->is_present && is_present && !chip->charger_broadcasts)
|
|
sbs_disable_charger_broadcasts(chip);
|
|
|
|
chip->is_present = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_read_word_data(struct i2c_client *client, u8 address)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
int retries = chip->i2c_retry_count;
|
|
s32 ret = 0;
|
|
|
|
while (retries > 0) {
|
|
ret = i2c_smbus_read_word_data(client, address);
|
|
if (ret >= 0)
|
|
break;
|
|
retries--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev,
|
|
"%s: i2c read at address 0x%x failed\n",
|
|
__func__, address);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
s32 ret = 0, block_length = 0;
|
|
int retries_length, retries_block;
|
|
u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
|
|
|
|
retries_length = chip->i2c_retry_count;
|
|
retries_block = chip->i2c_retry_count;
|
|
|
|
dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
|
|
"Fallback method does not support PEC.\n");
|
|
|
|
/* Adapter needs to support these two functions */
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_I2C_BLOCK)){
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Get the length of block data */
|
|
while (retries_length > 0) {
|
|
ret = i2c_smbus_read_byte_data(client, address);
|
|
if (ret >= 0)
|
|
break;
|
|
retries_length--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev,
|
|
"%s: i2c read at address 0x%x failed\n",
|
|
__func__, address);
|
|
return ret;
|
|
}
|
|
|
|
/* block_length does not include NULL terminator */
|
|
block_length = ret;
|
|
if (block_length > I2C_SMBUS_BLOCK_MAX) {
|
|
dev_err(&client->dev,
|
|
"%s: Returned block_length is longer than 0x%x\n",
|
|
__func__, I2C_SMBUS_BLOCK_MAX);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get the block data */
|
|
while (retries_block > 0) {
|
|
ret = i2c_smbus_read_i2c_block_data(
|
|
client, address,
|
|
block_length + 1, block_buffer);
|
|
if (ret >= 0)
|
|
break;
|
|
retries_block--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev,
|
|
"%s: i2c read at address 0x%x failed\n",
|
|
__func__, address);
|
|
return ret;
|
|
}
|
|
|
|
/* block_buffer[0] == block_length */
|
|
memcpy(values, block_buffer + 1, block_length);
|
|
values[block_length] = '\0';
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
int retries = chip->i2c_retry_count;
|
|
int ret = 0;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
|
|
bool pec = client->flags & I2C_CLIENT_PEC;
|
|
client->flags &= ~I2C_CLIENT_PEC;
|
|
ret = sbs_read_string_data_fallback(client, address, values);
|
|
if (pec)
|
|
client->flags |= I2C_CLIENT_PEC;
|
|
return ret;
|
|
}
|
|
|
|
while (retries > 0) {
|
|
ret = i2c_smbus_read_block_data(client, address, values);
|
|
if (ret >= 0)
|
|
break;
|
|
retries--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* add string termination */
|
|
values[ret] = '\0';
|
|
return ret;
|
|
}
|
|
|
|
static int sbs_write_word_data(struct i2c_client *client, u8 address,
|
|
u16 value)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
int retries = chip->i2c_retry_count;
|
|
s32 ret = 0;
|
|
|
|
while (retries > 0) {
|
|
ret = i2c_smbus_write_word_data(client, address, value);
|
|
if (ret >= 0)
|
|
break;
|
|
retries--;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_dbg(&client->dev,
|
|
"%s: i2c write to address 0x%x failed\n",
|
|
__func__, address);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_status_correct(struct i2c_client *client, int *intval)
|
|
{
|
|
int ret;
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = (s16)ret;
|
|
|
|
/* Not drawing current -> not charging (i.e. idle) */
|
|
if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0)
|
|
*intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
|
|
if (*intval == POWER_SUPPLY_STATUS_FULL) {
|
|
/* Drawing or providing current when full */
|
|
if (ret > 0)
|
|
*intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else if (ret < 0)
|
|
*intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool sbs_bat_needs_calibration(struct i2c_client *client)
|
|
{
|
|
int ret;
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr);
|
|
if (ret < 0)
|
|
return false;
|
|
|
|
return !!(ret & BIT(7));
|
|
}
|
|
|
|
static int sbs_get_ti_battery_presence_and_health(
|
|
struct i2c_client *client, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
s32 ret;
|
|
|
|
/*
|
|
* Write to ManufacturerAccess with ManufacturerAccess command
|
|
* and then read the status.
|
|
*/
|
|
ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
|
|
MANUFACTURER_ACCESS_STATUS);
|
|
if (ret < 0) {
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT)
|
|
val->intval = 0; /* battery removed */
|
|
return ret;
|
|
}
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
|
|
if (ret < 0) {
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT)
|
|
val->intval = 0; /* battery removed */
|
|
return ret;
|
|
}
|
|
|
|
if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
|
|
ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
|
|
val->intval = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* Mask the upper nibble of 2nd byte and
|
|
* lower byte of response then
|
|
* shift the result by 8 to get status*/
|
|
ret &= 0x0F00;
|
|
ret >>= 8;
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT) {
|
|
if (ret == 0x0F)
|
|
/* battery removed */
|
|
val->intval = 0;
|
|
else
|
|
val->intval = 1;
|
|
} else if (psp == POWER_SUPPLY_PROP_HEALTH) {
|
|
if (ret == 0x09)
|
|
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
else if (ret == 0x0B)
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
else if (ret == 0x0C)
|
|
val->intval = POWER_SUPPLY_HEALTH_DEAD;
|
|
else if (sbs_bat_needs_calibration(client))
|
|
val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
|
|
else
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_battery_presence_and_health(
|
|
struct i2c_client *client, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
|
|
return sbs_get_ti_battery_presence_and_health(client, psp, val);
|
|
|
|
/* Dummy command; if it succeeds, battery is present. */
|
|
ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
|
|
|
|
if (ret < 0) { /* battery not present*/
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT) {
|
|
val->intval = 0;
|
|
return 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT)
|
|
val->intval = 1; /* battery present */
|
|
else { /* POWER_SUPPLY_PROP_HEALTH */
|
|
if (sbs_bat_needs_calibration(client)) {
|
|
val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
|
|
} else {
|
|
/* SBS spec doesn't have a general health command. */
|
|
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_battery_property(struct i2c_client *client,
|
|
int reg_offset, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
s32 ret;
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* returned values are 16 bit */
|
|
if (sbs_data[reg_offset].min_value < 0)
|
|
ret = (s16)ret;
|
|
|
|
if (ret >= sbs_data[reg_offset].min_value &&
|
|
ret <= sbs_data[reg_offset].max_value) {
|
|
val->intval = ret;
|
|
if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
|
|
if (!(ret & BATTERY_INITIALIZED))
|
|
val->intval =
|
|
POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
|
|
else if (ret & BATTERY_FULL_CHARGED)
|
|
val->intval =
|
|
POWER_SUPPLY_CAPACITY_LEVEL_FULL;
|
|
else if (ret & BATTERY_FULL_DISCHARGED)
|
|
val->intval =
|
|
POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
|
|
else
|
|
val->intval =
|
|
POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
|
|
return 0;
|
|
} else if (psp != POWER_SUPPLY_PROP_STATUS) {
|
|
return 0;
|
|
}
|
|
|
|
if (ret & BATTERY_FULL_CHARGED)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else if (ret & BATTERY_DISCHARGING)
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
|
|
sbs_status_correct(client, &val->intval);
|
|
|
|
if (chip->poll_time == 0)
|
|
chip->last_state = val->intval;
|
|
else if (chip->last_state != val->intval) {
|
|
cancel_delayed_work_sync(&chip->work);
|
|
power_supply_changed(chip->power_supply);
|
|
chip->poll_time = 0;
|
|
}
|
|
} else {
|
|
if (psp == POWER_SUPPLY_PROP_STATUS)
|
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
else if (psp == POWER_SUPPLY_PROP_CAPACITY)
|
|
/* sbs spec says that this can be >100 %
|
|
* even if max value is 100 %
|
|
*/
|
|
val->intval = min(ret, 100);
|
|
else
|
|
val->intval = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_property_index(struct i2c_client *client,
|
|
enum power_supply_property psp)
|
|
{
|
|
int count;
|
|
|
|
for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
|
|
if (psp == sbs_data[count].psp)
|
|
return count;
|
|
|
|
dev_warn(&client->dev,
|
|
"%s: Invalid Property - %d\n", __func__, psp);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *sbs_get_constant_string(struct sbs_info *chip,
|
|
enum power_supply_property psp)
|
|
{
|
|
int ret;
|
|
char *buf;
|
|
u8 addr;
|
|
|
|
buf = sbs_get_string_buf(chip, psp);
|
|
if (IS_ERR(buf))
|
|
return buf;
|
|
|
|
if (!buf[0]) {
|
|
ret = sbs_get_property_index(chip->client, psp);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
|
|
addr = sbs_data[ret].addr;
|
|
|
|
ret = sbs_read_string_data(chip->client, addr, buf);
|
|
if (ret < 0)
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return buf;
|
|
}
|
|
|
|
static void sbs_unit_adjustment(struct i2c_client *client,
|
|
enum power_supply_property psp, union power_supply_propval *val)
|
|
{
|
|
#define BASE_UNIT_CONVERSION 1000
|
|
#define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION)
|
|
#define TIME_UNIT_CONVERSION 60
|
|
#define TEMP_KELVIN_TO_CELSIUS 2731
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_ENERGY_NOW:
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL:
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
|
|
/* sbs provides energy in units of 10mWh.
|
|
* Convert to µWh
|
|
*/
|
|
val->intval *= BATTERY_MODE_CAP_MULT_WATT;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
case POWER_SUPPLY_PROP_CHARGE_NOW:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
val->intval *= BASE_UNIT_CONVERSION;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
/* sbs provides battery temperature in 0.1K
|
|
* so convert it to 0.1°C
|
|
*/
|
|
val->intval -= TEMP_KELVIN_TO_CELSIUS;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
|
|
/* sbs provides time to empty and time to full in minutes.
|
|
* Convert to seconds
|
|
*/
|
|
val->intval *= TIME_UNIT_CONVERSION;
|
|
break;
|
|
|
|
default:
|
|
dev_dbg(&client->dev,
|
|
"%s: no need for unit conversion %d\n", __func__, psp);
|
|
}
|
|
}
|
|
|
|
static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
|
|
enum sbs_capacity_mode mode)
|
|
{
|
|
int ret, original_val;
|
|
|
|
original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
|
|
if (original_val < 0)
|
|
return original_val;
|
|
|
|
if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
|
|
return mode;
|
|
|
|
if (mode == CAPACITY_MODE_AMPS)
|
|
ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
|
|
else
|
|
ret = original_val | BATTERY_MODE_CAPACITY_MASK;
|
|
|
|
ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
return original_val & BATTERY_MODE_CAPACITY_MASK;
|
|
}
|
|
|
|
static int sbs_get_battery_capacity(struct i2c_client *client,
|
|
int reg_offset, enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
s32 ret;
|
|
enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
|
|
|
|
if (power_supply_is_amp_property(psp))
|
|
mode = CAPACITY_MODE_AMPS;
|
|
|
|
mode = sbs_set_capacity_mode(client, mode);
|
|
if ((int)mode < 0)
|
|
return mode;
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val->intval = ret;
|
|
|
|
ret = sbs_set_capacity_mode(client, mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char sbs_serial[5];
|
|
static int sbs_get_battery_serial_number(struct i2c_client *client,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
sprintf(sbs_serial, "%04x", ret);
|
|
val->strval = sbs_serial;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_chemistry(struct sbs_info *chip,
|
|
union power_supply_propval *val)
|
|
{
|
|
const char *chemistry;
|
|
|
|
if (chip->technology != -1) {
|
|
val->intval = chip->technology;
|
|
return 0;
|
|
}
|
|
|
|
chemistry = sbs_get_constant_string(chip, POWER_SUPPLY_PROP_TECHNOLOGY);
|
|
|
|
if (IS_ERR(chemistry))
|
|
return PTR_ERR(chemistry);
|
|
|
|
if (!strncasecmp(chemistry, "LION", 4))
|
|
chip->technology = POWER_SUPPLY_TECHNOLOGY_LION;
|
|
else if (!strncasecmp(chemistry, "LiP", 3))
|
|
chip->technology = POWER_SUPPLY_TECHNOLOGY_LIPO;
|
|
else if (!strncasecmp(chemistry, "NiCd", 4))
|
|
chip->technology = POWER_SUPPLY_TECHNOLOGY_NiCd;
|
|
else if (!strncasecmp(chemistry, "NiMH", 4))
|
|
chip->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
|
|
else
|
|
chip->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
|
|
|
|
if (chip->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
|
|
dev_warn(&chip->client->dev, "Unknown chemistry: %s\n", chemistry);
|
|
|
|
val->intval = chip->technology;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_battery_manufacture_date(struct i2c_client *client,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret;
|
|
u16 day, month, year;
|
|
|
|
ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
day = ret & GENMASK(4, 0);
|
|
month = (ret & GENMASK(8, 5)) >> 5;
|
|
year = ((ret & GENMASK(15, 9)) >> 9) + 1980;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
|
|
val->intval = year;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
|
|
val->intval = month;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
|
|
val->intval = day;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
int ret = 0;
|
|
struct sbs_info *chip = power_supply_get_drvdata(psy);
|
|
struct i2c_client *client = chip->client;
|
|
const char *str;
|
|
|
|
if (chip->gpio_detect) {
|
|
ret = gpiod_get_value_cansleep(chip->gpio_detect);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT) {
|
|
val->intval = ret;
|
|
sbs_update_presence(chip, ret);
|
|
return 0;
|
|
}
|
|
if (ret == 0)
|
|
return -ENODATA;
|
|
}
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = sbs_get_battery_presence_and_health(client, psp, val);
|
|
|
|
/* this can only be true if no gpio is used */
|
|
if (psp == POWER_SUPPLY_PROP_PRESENT)
|
|
return 0;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
|
ret = sbs_get_chemistry(chip, val);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
goto done; /* don't trigger power_supply_changed()! */
|
|
|
|
case POWER_SUPPLY_PROP_ENERGY_NOW:
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL:
|
|
case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
|
|
case POWER_SUPPLY_PROP_CHARGE_NOW:
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
|
|
ret = sbs_get_property_index(client, psp);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
/* sbs_get_battery_capacity() will change the battery mode
|
|
* temporarily to read the requested attribute. Ensure we stay
|
|
* in the desired mode for the duration of the attribute read.
|
|
*/
|
|
mutex_lock(&chip->mode_lock);
|
|
ret = sbs_get_battery_capacity(client, ret, psp, val);
|
|
mutex_unlock(&chip->mode_lock);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_SERIAL_NUMBER:
|
|
ret = sbs_get_battery_serial_number(client, val);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
|
|
case POWER_SUPPLY_PROP_CYCLE_COUNT:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
case POWER_SUPPLY_PROP_CURRENT_AVG:
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
|
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
|
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN:
|
|
ret = sbs_get_property_index(client, psp);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
ret = sbs_get_battery_property(client, ret, psp, val);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
str = sbs_get_constant_string(chip, psp);
|
|
if (IS_ERR(str))
|
|
ret = PTR_ERR(str);
|
|
else
|
|
val->strval = str;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
|
|
case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
|
|
ret = sbs_get_battery_manufacture_date(client, psp, val);
|
|
break;
|
|
|
|
default:
|
|
dev_err(&client->dev,
|
|
"%s: INVALID property\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
|
|
bool old_present = chip->is_present;
|
|
union power_supply_propval val;
|
|
int err = sbs_get_battery_presence_and_health(
|
|
client, POWER_SUPPLY_PROP_PRESENT, &val);
|
|
|
|
sbs_update_presence(chip, !err && val.intval);
|
|
|
|
if (old_present != chip->is_present)
|
|
power_supply_changed(chip->power_supply);
|
|
}
|
|
|
|
done:
|
|
if (!ret) {
|
|
/* Convert units to match requirements for power supply class */
|
|
sbs_unit_adjustment(client, psp, val);
|
|
dev_dbg(&client->dev,
|
|
"%s: property = %d, value = %x\n", __func__,
|
|
psp, val->intval);
|
|
} else if (!chip->is_present) {
|
|
/* battery not present, so return NODATA for properties */
|
|
ret = -ENODATA;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void sbs_supply_changed(struct sbs_info *chip)
|
|
{
|
|
struct power_supply *battery = chip->power_supply;
|
|
int ret;
|
|
|
|
ret = gpiod_get_value_cansleep(chip->gpio_detect);
|
|
if (ret < 0)
|
|
return;
|
|
sbs_update_presence(chip, ret);
|
|
power_supply_changed(battery);
|
|
}
|
|
|
|
static irqreturn_t sbs_irq(int irq, void *devid)
|
|
{
|
|
sbs_supply_changed(devid);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
|
|
unsigned int data)
|
|
{
|
|
sbs_supply_changed(i2c_get_clientdata(client));
|
|
}
|
|
|
|
static void sbs_external_power_changed(struct power_supply *psy)
|
|
{
|
|
struct sbs_info *chip = power_supply_get_drvdata(psy);
|
|
|
|
/* cancel outstanding work */
|
|
cancel_delayed_work_sync(&chip->work);
|
|
|
|
schedule_delayed_work(&chip->work, HZ);
|
|
chip->poll_time = chip->poll_retry_count;
|
|
}
|
|
|
|
static void sbs_delayed_work(struct work_struct *work)
|
|
{
|
|
struct sbs_info *chip;
|
|
s32 ret;
|
|
|
|
chip = container_of(work, struct sbs_info, work.work);
|
|
|
|
ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
|
|
/* if the read failed, give up on this work */
|
|
if (ret < 0) {
|
|
chip->poll_time = 0;
|
|
return;
|
|
}
|
|
|
|
if (ret & BATTERY_FULL_CHARGED)
|
|
ret = POWER_SUPPLY_STATUS_FULL;
|
|
else if (ret & BATTERY_DISCHARGING)
|
|
ret = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
else
|
|
ret = POWER_SUPPLY_STATUS_CHARGING;
|
|
|
|
sbs_status_correct(chip->client, &ret);
|
|
|
|
if (chip->last_state != ret) {
|
|
chip->poll_time = 0;
|
|
power_supply_changed(chip->power_supply);
|
|
return;
|
|
}
|
|
if (chip->poll_time > 0) {
|
|
schedule_delayed_work(&chip->work, HZ);
|
|
chip->poll_time--;
|
|
return;
|
|
}
|
|
}
|
|
|
|
static const struct power_supply_desc sbs_default_desc = {
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.properties = sbs_properties,
|
|
.num_properties = ARRAY_SIZE(sbs_properties),
|
|
.get_property = sbs_get_property,
|
|
.external_power_changed = sbs_external_power_changed,
|
|
};
|
|
|
|
static int sbs_probe(struct i2c_client *client)
|
|
{
|
|
struct sbs_info *chip;
|
|
struct power_supply_desc *sbs_desc;
|
|
struct sbs_platform_data *pdata = client->dev.platform_data;
|
|
struct power_supply_config psy_cfg = {};
|
|
int rc;
|
|
int irq;
|
|
|
|
sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
|
|
sizeof(*sbs_desc), GFP_KERNEL);
|
|
if (!sbs_desc)
|
|
return -ENOMEM;
|
|
|
|
sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s",
|
|
dev_name(&client->dev));
|
|
if (!sbs_desc->name)
|
|
return -ENOMEM;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
|
|
chip->client = client;
|
|
psy_cfg.of_node = client->dev.of_node;
|
|
psy_cfg.drv_data = chip;
|
|
chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
sbs_invalidate_cached_props(chip);
|
|
mutex_init(&chip->mode_lock);
|
|
|
|
/* use pdata if available, fall back to DT properties,
|
|
* or hardcoded defaults if not
|
|
*/
|
|
rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count",
|
|
&chip->i2c_retry_count);
|
|
if (rc)
|
|
chip->i2c_retry_count = 0;
|
|
|
|
rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count",
|
|
&chip->poll_retry_count);
|
|
if (rc)
|
|
chip->poll_retry_count = 0;
|
|
|
|
if (pdata) {
|
|
chip->poll_retry_count = pdata->poll_retry_count;
|
|
chip->i2c_retry_count = pdata->i2c_retry_count;
|
|
}
|
|
chip->i2c_retry_count = chip->i2c_retry_count + 1;
|
|
|
|
chip->charger_broadcasts = !device_property_read_bool(&client->dev,
|
|
"sbs,disable-charger-broadcasts");
|
|
|
|
chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
|
|
"sbs,battery-detect", GPIOD_IN);
|
|
if (IS_ERR(chip->gpio_detect))
|
|
return dev_err_probe(&client->dev, PTR_ERR(chip->gpio_detect),
|
|
"Failed to get gpio\n");
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
if (!chip->gpio_detect)
|
|
goto skip_gpio;
|
|
|
|
irq = gpiod_to_irq(chip->gpio_detect);
|
|
if (irq <= 0) {
|
|
dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
|
|
goto skip_gpio;
|
|
}
|
|
|
|
rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
|
|
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
dev_name(&client->dev), chip);
|
|
if (rc) {
|
|
dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
|
|
goto skip_gpio;
|
|
}
|
|
|
|
skip_gpio:
|
|
/*
|
|
* Before we register, we might need to make sure we can actually talk
|
|
* to the battery.
|
|
*/
|
|
if (!(force_load || chip->gpio_detect)) {
|
|
union power_supply_propval val;
|
|
|
|
rc = sbs_get_battery_presence_and_health(
|
|
client, POWER_SUPPLY_PROP_PRESENT, &val);
|
|
if (rc < 0 || !val.intval)
|
|
return dev_err_probe(&client->dev, -ENODEV,
|
|
"Failed to get present status\n");
|
|
}
|
|
|
|
rc = devm_delayed_work_autocancel(&client->dev, &chip->work,
|
|
sbs_delayed_work);
|
|
if (rc)
|
|
return rc;
|
|
|
|
chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(chip->power_supply))
|
|
return dev_err_probe(&client->dev, PTR_ERR(chip->power_supply),
|
|
"Failed to register power supply\n");
|
|
|
|
dev_info(&client->dev,
|
|
"%s: battery gas gauge device registered\n", client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined CONFIG_PM_SLEEP
|
|
|
|
static int sbs_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
int ret;
|
|
|
|
if (chip->poll_time > 0)
|
|
cancel_delayed_work_sync(&chip->work);
|
|
|
|
if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
|
|
/* Write to manufacturer access with sleep command. */
|
|
ret = sbs_write_word_data(client,
|
|
sbs_data[REG_MANUFACTURER_DATA].addr,
|
|
MANUFACTURER_ACCESS_SLEEP);
|
|
if (chip->is_present && ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
|
|
#define SBS_PM_OPS (&sbs_pm_ops)
|
|
|
|
#else
|
|
#define SBS_PM_OPS NULL
|
|
#endif
|
|
|
|
static const struct i2c_device_id sbs_id[] = {
|
|
{ "bq20z65", 0 },
|
|
{ "bq20z75", 0 },
|
|
{ "sbs-battery", 1 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sbs_id);
|
|
|
|
static const struct of_device_id sbs_dt_ids[] = {
|
|
{ .compatible = "sbs,sbs-battery" },
|
|
{
|
|
.compatible = "ti,bq20z65",
|
|
.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
|
|
},
|
|
{
|
|
.compatible = "ti,bq20z75",
|
|
.data = (void *)SBS_FLAGS_TI_BQ20ZX5,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sbs_dt_ids);
|
|
|
|
static struct i2c_driver sbs_battery_driver = {
|
|
.probe_new = sbs_probe,
|
|
.alert = sbs_alert,
|
|
.id_table = sbs_id,
|
|
.driver = {
|
|
.name = "sbs-battery",
|
|
.of_match_table = sbs_dt_ids,
|
|
.pm = SBS_PM_OPS,
|
|
},
|
|
};
|
|
module_i2c_driver(sbs_battery_driver);
|
|
|
|
MODULE_DESCRIPTION("SBS battery monitor driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(force_load, bool, 0444);
|
|
MODULE_PARM_DESC(force_load,
|
|
"Attempt to load the driver even if no battery is connected");
|