932 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			932 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | ||
| /*
 | ||
|  *  Driver for Analog Devices (Linear Technology) LTC4162-L charger IC.
 | ||
|  *  Copyright (C) 2020, Topic Embedded Products
 | ||
|  */
 | ||
| 
 | ||
| #include <linux/module.h>
 | ||
| #include <linux/delay.h>
 | ||
| #include <linux/of_device.h>
 | ||
| #include <linux/pm_runtime.h>
 | ||
| #include <linux/power_supply.h>
 | ||
| #include <linux/i2c.h>
 | ||
| #include <linux/regmap.h>
 | ||
| 
 | ||
| /* Registers (names based on what datasheet uses) */
 | ||
| #define LTC4162L_EN_LIMIT_ALERTS_REG		0x0D
 | ||
| #define LTC4162L_EN_CHARGER_STATE_ALERTS_REG	0x0E
 | ||
| #define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG	0x0F
 | ||
| #define LTC4162L_CONFIG_BITS_REG		0x14
 | ||
| #define LTC4162L_IIN_LIMIT_TARGET		0x15
 | ||
| #define LTC4162L_ARM_SHIP_MODE			0x19
 | ||
| #define LTC4162L_CHARGE_CURRENT_SETTING		0X1A
 | ||
| #define LTC4162L_VCHARGE_SETTING		0X1B
 | ||
| #define LTC4162L_C_OVER_X_THRESHOLD		0x1C
 | ||
| #define LTC4162L_MAX_CV_TIME			0X1D
 | ||
| #define LTC4162L_MAX_CHARGE_TIME		0X1E
 | ||
| #define LTC4162L_CHARGER_CONFIG_BITS		0x29
 | ||
| #define LTC4162L_CHARGER_STATE			0x34
 | ||
| #define LTC4162L_CHARGE_STATUS			0x35
 | ||
| #define LTC4162L_LIMIT_ALERTS_REG		0x36
 | ||
| #define LTC4162L_CHARGER_STATE_ALERTS_REG	0x37
 | ||
| #define LTC4162L_CHARGE_STATUS_ALERTS_REG	0x38
 | ||
| #define LTC4162L_SYSTEM_STATUS_REG		0x39
 | ||
| #define LTC4162L_VBAT				0x3A
 | ||
| #define LTC4162L_VIN				0x3B
 | ||
| #define LTC4162L_VOUT				0x3C
 | ||
| #define LTC4162L_IBAT				0x3D
 | ||
| #define LTC4162L_IIN				0x3E
 | ||
| #define LTC4162L_DIE_TEMPERATURE		0x3F
 | ||
| #define LTC4162L_THERMISTOR_VOLTAGE		0x40
 | ||
| #define LTC4162L_BSR				0x41
 | ||
| #define LTC4162L_JEITA_REGION			0x42
 | ||
| #define LTC4162L_CHEM_CELLS_REG			0x43
 | ||
| #define LTC4162L_ICHARGE_DAC			0x44
 | ||
| #define LTC4162L_VCHARGE_DAC			0x45
 | ||
| #define LTC4162L_IIN_LIMIT_DAC			0x46
 | ||
| #define LTC4162L_VBAT_FILT			0x47
 | ||
| #define LTC4162L_INPUT_UNDERVOLTAGE_DAC		0x4B
 | ||
| 
 | ||
| /* Enumeration as in datasheet. Individual bits are mutually exclusive. */
 | ||
| enum ltc4162l_state {
 | ||
| 	battery_detection = 2048,
 | ||
| 	charger_suspended = 256,
 | ||
| 	precharge = 128,   /* trickle on low bat voltage */
 | ||
| 	cc_cv_charge = 64, /* normal charge */
 | ||
| 	ntc_pause = 32,
 | ||
| 	timer_term = 16,
 | ||
| 	c_over_x_term = 8, /* battery is full */
 | ||
| 	max_charge_time_fault = 4,
 | ||
| 	bat_missing_fault = 2,
 | ||
| 	bat_short_fault = 1
 | ||
| };
 | ||
| 
 | ||
| /* Individual bits are mutually exclusive. Only active in charging states.*/
 | ||
| enum ltc4162l_charge_status {
 | ||
| 	ilim_reg_active = 32,
 | ||
| 	thermal_reg_active = 16,
 | ||
| 	vin_uvcl_active = 8,
 | ||
| 	iin_limit_active = 4,
 | ||
| 	constant_current = 2,
 | ||
| 	constant_voltage = 1,
 | ||
| 	charger_off = 0
 | ||
| };
 | ||
| 
 | ||
| /* Magic number to write to ARM_SHIP_MODE register */
 | ||
| #define LTC4162L_ARM_SHIP_MODE_MAGIC 21325
 | ||
| 
 | ||
| struct ltc4162l_info {
 | ||
| 	struct i2c_client	*client;
 | ||
| 	struct regmap		*regmap;
 | ||
| 	struct power_supply	*charger;
 | ||
| 	u32 rsnsb;	/* Series resistor that sets charge current, microOhm */
 | ||
| 	u32 rsnsi;	/* Series resistor to measure input current, microOhm */
 | ||
| 	u8 cell_count;	/* Number of connected cells, 0 while unknown */
 | ||
| };
 | ||
| 
 | ||
| static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info)
 | ||
| {
 | ||
| 	int ret;
 | ||
| 	unsigned int val;
 | ||
| 
 | ||
| 	/* Once read successfully */
 | ||
| 	if (info->cell_count)
 | ||
| 		return info->cell_count;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val);
 | ||
| 	if (ret)
 | ||
| 		return 0;
 | ||
| 
 | ||
| 	/* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */
 | ||
| 	val &= 0x0f;
 | ||
| 	if (!val)
 | ||
| 		return 0;
 | ||
| 
 | ||
| 	/* Once determined, keep the value */
 | ||
| 	info->cell_count = val;
 | ||
| 
 | ||
| 	return val;
 | ||
| };
 | ||
| 
 | ||
| /* Convert enum value to POWER_SUPPLY_STATUS value */
 | ||
| static int ltc4162l_state_decode(enum ltc4162l_state value)
 | ||
| {
 | ||
| 	switch (value) {
 | ||
| 	case precharge:
 | ||
| 	case cc_cv_charge:
 | ||
| 		return POWER_SUPPLY_STATUS_CHARGING;
 | ||
| 	case c_over_x_term:
 | ||
| 		return POWER_SUPPLY_STATUS_FULL;
 | ||
| 	case bat_missing_fault:
 | ||
| 	case bat_short_fault:
 | ||
| 		return POWER_SUPPLY_STATUS_UNKNOWN;
 | ||
| 	default:
 | ||
| 		return POWER_SUPPLY_STATUS_NOT_CHARGING;
 | ||
| 	}
 | ||
| };
 | ||
| 
 | ||
| static int ltc4162l_get_status(struct ltc4162l_info *info,
 | ||
| 			       union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val);
 | ||
| 	if (ret) {
 | ||
| 		dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n");
 | ||
| 		return ret;
 | ||
| 	}
 | ||
| 
 | ||
| 	val->intval = ltc4162l_state_decode(regval);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value)
 | ||
| {
 | ||
| 	if (!value)
 | ||
| 		return POWER_SUPPLY_CHARGE_TYPE_NONE;
 | ||
| 
 | ||
| 	/* constant voltage/current and input_current limit are "fast" modes */
 | ||
| 	if (value <= iin_limit_active)
 | ||
| 		return POWER_SUPPLY_CHARGE_TYPE_FAST;
 | ||
| 
 | ||
| 	/* Anything that's not fast we'll return as trickle */
 | ||
| 	return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_charge_type(struct ltc4162l_info *info,
 | ||
| 				    union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	val->intval = ltc4162l_charge_status_decode(regval);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_state_to_health(enum ltc4162l_state value)
 | ||
| {
 | ||
| 	switch (value) {
 | ||
| 	case ntc_pause:
 | ||
| 		return POWER_SUPPLY_HEALTH_OVERHEAT;
 | ||
| 	case timer_term:
 | ||
| 		return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
 | ||
| 	case max_charge_time_fault:
 | ||
| 		return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
 | ||
| 	case bat_missing_fault:
 | ||
| 		return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
 | ||
| 	case bat_short_fault:
 | ||
| 		return POWER_SUPPLY_HEALTH_DEAD;
 | ||
| 	default:
 | ||
| 		return POWER_SUPPLY_HEALTH_GOOD;
 | ||
| 	}
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_health(struct ltc4162l_info *info,
 | ||
| 			       union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	val->intval = ltc4162l_state_to_health(regval);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_online(struct ltc4162l_info *info,
 | ||
| 			       union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* BIT(2) indicates if input voltage is sufficient to charge */
 | ||
| 	val->intval = !!(regval & BIT(2));
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_vbat(struct ltc4162l_info *info,
 | ||
| 				  unsigned int reg,
 | ||
| 				  union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, reg, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* cell_count × 192.4μV/LSB */
 | ||
| 	regval *= 1924;
 | ||
| 	regval *= ltc4162l_get_cell_count(info);
 | ||
| 	regval /= 10;
 | ||
| 	val->intval = regval;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_ibat(struct ltc4162l_info *info,
 | ||
| 			     union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_IBAT, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */
 | ||
| 	ret = (s16)(regval & 0xFFFF);
 | ||
| 	val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| 
 | ||
| static int ltc4162l_get_input_voltage(struct ltc4162l_info *info,
 | ||
| 				      union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_VIN, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* 1.649mV/LSB */
 | ||
| 	val->intval =  regval * 1694;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_input_current(struct ltc4162l_info *info,
 | ||
| 				      union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_IIN, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */
 | ||
| 	ret = (s16)(regval & 0xFFFF);
 | ||
| 	ret *= 14660;
 | ||
| 	ret /= info->rsnsi;
 | ||
| 	ret *= 100;
 | ||
| 
 | ||
| 	val->intval = ret;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_icharge(struct ltc4162l_info *info,
 | ||
| 				unsigned int reg,
 | ||
| 				union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, reg, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	regval &= BIT(6) - 1; /* Only the lower 5 bits */
 | ||
| 
 | ||
| 	/* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */
 | ||
| 	++regval;
 | ||
| 	val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_set_icharge(struct ltc4162l_info *info,
 | ||
| 				unsigned int reg,
 | ||
| 				unsigned int value)
 | ||
| {
 | ||
| 	value = mult_frac(value, info->rsnsb, 100000u);
 | ||
| 	value /= 10000u;
 | ||
| 
 | ||
| 	/* Round to lowest possible */
 | ||
| 	if (value)
 | ||
| 		--value;
 | ||
| 
 | ||
| 	if (value > 31)
 | ||
| 		return -EINVAL;
 | ||
| 
 | ||
| 	return regmap_write(info->regmap, reg, value);
 | ||
| }
 | ||
| 
 | ||
| 
 | ||
| static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
 | ||
| 				unsigned int reg,
 | ||
| 				union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 	u32 voltage;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, reg, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	regval &= BIT(6) - 1; /* Only the lower 5 bits */
 | ||
| 
 | ||
| 	/*
 | ||
| 	 * charge voltage setting can be computed from
 | ||
| 	 * cell_count × (vcharge_setting × 12.5mV + 3.8125V)
 | ||
| 	 * where vcharge_setting ranges from 0 to 31 (4.2V max).
 | ||
| 	 */
 | ||
| 	voltage = 3812500 + (regval * 12500);
 | ||
| 	voltage *= ltc4162l_get_cell_count(info);
 | ||
| 	val->intval = voltage;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
 | ||
| 				unsigned int reg,
 | ||
| 				unsigned int value)
 | ||
| {
 | ||
| 	u8 cell_count = ltc4162l_get_cell_count(info);
 | ||
| 
 | ||
| 	if (!cell_count)
 | ||
| 		return -EBUSY; /* Not available yet, try again later */
 | ||
| 
 | ||
| 	value /= cell_count;
 | ||
| 
 | ||
| 	if (value < 3812500)
 | ||
| 		return -EINVAL;
 | ||
| 
 | ||
| 	value -= 3812500;
 | ||
| 	value /= 12500;
 | ||
| 
 | ||
| 	if (value > 31)
 | ||
| 		return -EINVAL;
 | ||
| 
 | ||
| 	return regmap_write(info->regmap, reg, value);
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info,
 | ||
| 				     union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	regval &= BIT(6) - 1; /* Only 6 bits */
 | ||
| 
 | ||
| 	/* (iin_limit_dac + 1) × 500μV / RSNSI */
 | ||
| 	++regval;
 | ||
| 	regval *= 5000000u;
 | ||
| 	regval /= info->rsnsi;
 | ||
| 	val->intval = 100u * regval;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_set_iin_limit(struct ltc4162l_info *info,
 | ||
| 				  unsigned int value)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 
 | ||
| 	regval = mult_frac(value, info->rsnsi, 50000u);
 | ||
| 	regval /= 10000u;
 | ||
| 	if (regval)
 | ||
| 		--regval;
 | ||
| 	if (regval > 63)
 | ||
| 		regval = 63;
 | ||
| 
 | ||
| 	return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval);
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_die_temp(struct ltc4162l_info *info,
 | ||
| 				 union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* die_temp × 0.0215°C/LSB - 264.4°C */
 | ||
| 	ret = (s16)(regval & 0xFFFF);
 | ||
| 	ret *= 215;
 | ||
| 	ret /= 100; /* Centidegrees scale */
 | ||
| 	ret -= 26440;
 | ||
| 	val->intval = ret;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_get_term_current(struct ltc4162l_info *info,
 | ||
| 				     union power_supply_propval *val)
 | ||
| {
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* Check if C_OVER_X_THRESHOLD is enabled */
 | ||
| 	if (!(regval & BIT(2))) {
 | ||
| 		val->intval = 0;
 | ||
| 		return 0;
 | ||
| 	}
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* 1.466μV / RSNSB amperes/LSB */
 | ||
| 	regval *= 14660u;
 | ||
| 	regval /= info->rsnsb;
 | ||
| 	val->intval = 100 * regval;
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_set_term_current(struct ltc4162l_info *info,
 | ||
| 				     unsigned int value)
 | ||
| {
 | ||
| 	int ret;
 | ||
| 	unsigned int regval;
 | ||
| 
 | ||
| 	if (!value) {
 | ||
| 		/* Disable en_c_over_x_term when set to zero */
 | ||
| 		return regmap_update_bits(info->regmap,
 | ||
| 					  LTC4162L_CHARGER_CONFIG_BITS,
 | ||
| 					  BIT(2), 0);
 | ||
| 	}
 | ||
| 
 | ||
| 	regval = mult_frac(value, info->rsnsb, 14660u);
 | ||
| 	regval /= 100u;
 | ||
| 
 | ||
| 	ret =  regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* Set en_c_over_x_term after changing the threshold value */
 | ||
| 	return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS,
 | ||
| 				  BIT(2), BIT(2));
 | ||
| }
 | ||
| 
 | ||
| /* Custom properties */
 | ||
| static const char * const ltc4162l_charge_status_name[] = {
 | ||
| 	"ilim_reg_active", /* 32 */
 | ||
| 	"thermal_reg_active",
 | ||
| 	"vin_uvcl_active",
 | ||
| 	"iin_limit_active",
 | ||
| 	"constant_current",
 | ||
| 	"constant_voltage",
 | ||
| 	"charger_off" /* 0 */
 | ||
| };
 | ||
| 
 | ||
| static ssize_t charge_status_show(struct device *dev,
 | ||
| 				  struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	const char *result = ltc4162l_charge_status_name[
 | ||
| 				ARRAY_SIZE(ltc4162l_charge_status_name) - 1];
 | ||
| 	unsigned int regval;
 | ||
| 	unsigned int mask;
 | ||
| 	unsigned int index;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	/* Only one bit is set according to datasheet, let's be safe here */
 | ||
| 	for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) {
 | ||
| 		if (regval & mask) {
 | ||
| 			result = ltc4162l_charge_status_name[index];
 | ||
| 			break;
 | ||
| 		}
 | ||
| 	}
 | ||
| 
 | ||
| 	return sprintf(buf, "%s\n", result);
 | ||
| }
 | ||
| static DEVICE_ATTR_RO(charge_status);
 | ||
| 
 | ||
| static ssize_t vbat_show(struct device *dev,
 | ||
| 				  struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	union power_supply_propval val;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT, &val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return sprintf(buf, "%d\n", val.intval);
 | ||
| }
 | ||
| static DEVICE_ATTR_RO(vbat);
 | ||
| 
 | ||
| static ssize_t vbat_avg_show(struct device *dev,
 | ||
| 				  struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	union power_supply_propval val;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, &val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return sprintf(buf, "%d\n", val.intval);
 | ||
| }
 | ||
| static DEVICE_ATTR_RO(vbat_avg);
 | ||
| 
 | ||
| static ssize_t ibat_show(struct device *dev,
 | ||
| 				  struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	union power_supply_propval val;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = ltc4162l_get_ibat(info, &val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return sprintf(buf, "%d\n", val.intval);
 | ||
| }
 | ||
| static DEVICE_ATTR_RO(ibat);
 | ||
| 
 | ||
| static ssize_t force_telemetry_show(struct device *dev,
 | ||
| 				    struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return sprintf(buf, "%u\n", regval & BIT(2) ? 1 : 0);
 | ||
| }
 | ||
| 
 | ||
| static ssize_t force_telemetry_store(struct device *dev,
 | ||
| 	struct device_attribute *attr,
 | ||
| 	const char *buf,
 | ||
| 	size_t count)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	int ret;
 | ||
| 	unsigned int value;
 | ||
| 
 | ||
| 	ret = kstrtouint(buf, 0, &value);
 | ||
| 	if (ret < 0)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG,
 | ||
| 				 BIT(2), value ? BIT(2) : 0);
 | ||
| 	if (ret < 0)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return count;
 | ||
| }
 | ||
| 
 | ||
| static DEVICE_ATTR_RW(force_telemetry);
 | ||
| 
 | ||
| static ssize_t arm_ship_mode_show(struct device *dev,
 | ||
| 				    struct device_attribute *attr, char *buf)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	unsigned int regval;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, ®val);
 | ||
| 	if (ret)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return sprintf(buf, "%u\n",
 | ||
| 		regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0);
 | ||
| }
 | ||
| 
 | ||
| static ssize_t arm_ship_mode_store(struct device *dev,
 | ||
| 	struct device_attribute *attr,
 | ||
| 	const char *buf,
 | ||
| 	size_t count)
 | ||
| {
 | ||
| 	struct power_supply *psy = to_power_supply(dev);
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 	int ret;
 | ||
| 	unsigned int value;
 | ||
| 
 | ||
| 	ret = kstrtouint(buf, 0, &value);
 | ||
| 	if (ret < 0)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE,
 | ||
| 				value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0);
 | ||
| 	if (ret < 0)
 | ||
| 		return ret;
 | ||
| 
 | ||
| 	return count;
 | ||
| }
 | ||
| 
 | ||
| static DEVICE_ATTR_RW(arm_ship_mode);
 | ||
| 
 | ||
| static struct attribute *ltc4162l_sysfs_entries[] = {
 | ||
| 	&dev_attr_charge_status.attr,
 | ||
| 	&dev_attr_ibat.attr,
 | ||
| 	&dev_attr_vbat.attr,
 | ||
| 	&dev_attr_vbat_avg.attr,
 | ||
| 	&dev_attr_force_telemetry.attr,
 | ||
| 	&dev_attr_arm_ship_mode.attr,
 | ||
| 	NULL,
 | ||
| };
 | ||
| 
 | ||
| static const struct attribute_group ltc4162l_attr_group = {
 | ||
| 	.name	= NULL,	/* put in device directory */
 | ||
| 	.attrs	= ltc4162l_sysfs_entries,
 | ||
| };
 | ||
| 
 | ||
| static const struct attribute_group *ltc4162l_attr_groups[] = {
 | ||
| 	<c4162l_attr_group,
 | ||
| 	NULL,
 | ||
| };
 | ||
| 
 | ||
| static int ltc4162l_get_property(struct power_supply *psy,
 | ||
| 				 enum power_supply_property psp,
 | ||
| 				 union power_supply_propval *val)
 | ||
| {
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 
 | ||
| 	switch (psp) {
 | ||
| 	case POWER_SUPPLY_PROP_STATUS:
 | ||
| 		return ltc4162l_get_status(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
 | ||
| 		return ltc4162l_get_charge_type(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_HEALTH:
 | ||
| 		return ltc4162l_get_health(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_ONLINE:
 | ||
| 		return ltc4162l_get_online(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 | ||
| 		return ltc4162l_get_input_voltage(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 | ||
| 		return ltc4162l_get_input_current(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
 | ||
| 		return ltc4162l_get_icharge(info,
 | ||
| 				LTC4162L_ICHARGE_DAC, val);
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 | ||
| 		return ltc4162l_get_icharge(info,
 | ||
| 				LTC4162L_CHARGE_CURRENT_SETTING, val);
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 | ||
| 		return ltc4162l_get_vcharge(info,
 | ||
| 				LTC4162L_VCHARGE_DAC, val);
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 | ||
| 		return ltc4162l_get_vcharge(info,
 | ||
| 				LTC4162L_VCHARGE_SETTING, val);
 | ||
| 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 | ||
| 		return ltc4162l_get_iin_limit_dac(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_TEMP:
 | ||
| 		return ltc4162l_get_die_temp(info, val);
 | ||
| 	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 | ||
| 		return ltc4162l_get_term_current(info, val);
 | ||
| 	default:
 | ||
| 		return -EINVAL;
 | ||
| 	}
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_set_property(struct power_supply *psy,
 | ||
| 					 enum power_supply_property psp,
 | ||
| 					 const union power_supply_propval *val)
 | ||
| {
 | ||
| 	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
 | ||
| 
 | ||
| 	switch (psp) {
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 | ||
| 		return ltc4162l_set_icharge(info,
 | ||
| 				LTC4162L_CHARGE_CURRENT_SETTING, val->intval);
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 | ||
| 		return ltc4162l_set_vcharge(info,
 | ||
| 				LTC4162L_VCHARGE_SETTING, val->intval);
 | ||
| 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 | ||
| 		return ltc4162l_set_iin_limit(info, val->intval);
 | ||
| 	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 | ||
| 		return ltc4162l_set_term_current(info, val->intval);
 | ||
| 	default:
 | ||
| 		return -EINVAL;
 | ||
| 	}
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_property_is_writeable(struct power_supply *psy,
 | ||
| 						enum power_supply_property psp)
 | ||
| {
 | ||
| 	switch (psp) {
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 | ||
| 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 | ||
| 	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
 | ||
| 	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
 | ||
| 		return 1;
 | ||
| 	default:
 | ||
| 		return 0;
 | ||
| 	}
 | ||
| }
 | ||
| 
 | ||
| /* Charger power supply property routines */
 | ||
| static enum power_supply_property ltc4162l_properties[] = {
 | ||
| 	POWER_SUPPLY_PROP_STATUS,
 | ||
| 	POWER_SUPPLY_PROP_CHARGE_TYPE,
 | ||
| 	POWER_SUPPLY_PROP_HEALTH,
 | ||
| 	POWER_SUPPLY_PROP_ONLINE,
 | ||
| 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 | ||
| 	POWER_SUPPLY_PROP_CURRENT_NOW,
 | ||
| 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
 | ||
| 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 | ||
| 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 | ||
| 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 | ||
| 	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
 | ||
| 	POWER_SUPPLY_PROP_TEMP,
 | ||
| 	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
 | ||
| };
 | ||
| 
 | ||
| static const struct power_supply_desc ltc4162l_desc = {
 | ||
| 	.name		= "ltc4162-l",
 | ||
| 	.type		= POWER_SUPPLY_TYPE_MAINS,
 | ||
| 	.properties	= ltc4162l_properties,
 | ||
| 	.num_properties	= ARRAY_SIZE(ltc4162l_properties),
 | ||
| 	.get_property	= ltc4162l_get_property,
 | ||
| 	.set_property	= ltc4162l_set_property,
 | ||
| 	.property_is_writeable = ltc4162l_property_is_writeable,
 | ||
| };
 | ||
| 
 | ||
| static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg)
 | ||
| {
 | ||
| 	/* all registers up to this one are writeable */
 | ||
| 	if (reg <= LTC4162L_CHARGER_CONFIG_BITS)
 | ||
| 		return true;
 | ||
| 
 | ||
| 	/* The ALERTS registers can be written to clear alerts */
 | ||
| 	if (reg >= LTC4162L_LIMIT_ALERTS_REG &&
 | ||
| 	    reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG)
 | ||
| 		return true;
 | ||
| 
 | ||
| 	return false;
 | ||
| }
 | ||
| 
 | ||
| static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg)
 | ||
| {
 | ||
| 	/* all registers after this one are read-only status registers */
 | ||
| 	return reg > LTC4162L_CHARGER_CONFIG_BITS;
 | ||
| }
 | ||
| 
 | ||
| static const struct regmap_config ltc4162l_regmap_config = {
 | ||
| 	.reg_bits	= 8,
 | ||
| 	.val_bits	= 16,
 | ||
| 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 | ||
| 	.writeable_reg	= ltc4162l_is_writeable_reg,
 | ||
| 	.volatile_reg	= ltc4162l_is_volatile_reg,
 | ||
| 	.max_register	= LTC4162L_INPUT_UNDERVOLTAGE_DAC,
 | ||
| 	.cache_type	= REGCACHE_RBTREE,
 | ||
| };
 | ||
| 
 | ||
| static void ltc4162l_clear_interrupts(struct ltc4162l_info *info)
 | ||
| {
 | ||
| 	/* Acknowledge interrupt to chip by clearing all events */
 | ||
| 	regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0);
 | ||
| 	regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0);
 | ||
| 	regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0);
 | ||
| }
 | ||
| 
 | ||
| static int ltc4162l_probe(struct i2c_client *client,
 | ||
| 			const struct i2c_device_id *id)
 | ||
| {
 | ||
| 	struct i2c_adapter *adapter = client->adapter;
 | ||
| 	struct device *dev = &client->dev;
 | ||
| 	struct ltc4162l_info *info;
 | ||
| 	struct power_supply_config ltc4162l_config = {};
 | ||
| 	u32 value;
 | ||
| 	int ret;
 | ||
| 
 | ||
| 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
 | ||
| 		dev_err(dev, "No support for SMBUS_WORD_DATA\n");
 | ||
| 		return -ENODEV;
 | ||
| 	}
 | ||
| 	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
 | ||
| 	if (!info)
 | ||
| 		return -ENOMEM;
 | ||
| 
 | ||
| 	info->client = client;
 | ||
| 	i2c_set_clientdata(client, info);
 | ||
| 
 | ||
| 	info->regmap = devm_regmap_init_i2c(client, <c4162l_regmap_config);
 | ||
| 	if (IS_ERR(info->regmap)) {
 | ||
| 		dev_err(dev, "Failed to initialize register map\n");
 | ||
| 		return PTR_ERR(info->regmap);
 | ||
| 	}
 | ||
| 
 | ||
| 	ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms",
 | ||
| 				       &info->rsnsb);
 | ||
| 	if (ret) {
 | ||
| 		dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n");
 | ||
| 		return ret;
 | ||
| 	}
 | ||
| 	if (!info->rsnsb)
 | ||
| 		return -EINVAL;
 | ||
| 
 | ||
| 	ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms",
 | ||
| 				       &info->rsnsi);
 | ||
| 	if (ret) {
 | ||
| 		dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n");
 | ||
| 		return ret;
 | ||
| 	}
 | ||
| 	if (!info->rsnsi)
 | ||
| 		return -EINVAL;
 | ||
| 
 | ||
| 	if (!device_property_read_u32(dev, "lltc,cell-count", &value))
 | ||
| 		info->cell_count = value;
 | ||
| 
 | ||
| 	ltc4162l_config.of_node = dev->of_node;
 | ||
| 	ltc4162l_config.drv_data = info;
 | ||
| 	ltc4162l_config.attr_grp = ltc4162l_attr_groups;
 | ||
| 
 | ||
| 	info->charger = devm_power_supply_register(dev, <c4162l_desc,
 | ||
| 						   <c4162l_config);
 | ||
| 	if (IS_ERR(info->charger)) {
 | ||
| 		dev_err(dev, "Failed to register charger\n");
 | ||
| 		return PTR_ERR(info->charger);
 | ||
| 	}
 | ||
| 
 | ||
| 	/* Disable the threshold alerts, we're not using them */
 | ||
| 	regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0);
 | ||
| 
 | ||
| 	/* Enable interrupts on all status changes */
 | ||
| 	regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG,
 | ||
| 		     0x1fff);
 | ||
| 	regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f);
 | ||
| 
 | ||
| 	ltc4162l_clear_interrupts(info);
 | ||
| 
 | ||
| 	return 0;
 | ||
| }
 | ||
| 
 | ||
| static void ltc4162l_alert(struct i2c_client *client,
 | ||
| 			   enum i2c_alert_protocol type, unsigned int flag)
 | ||
| {
 | ||
| 	struct ltc4162l_info *info = i2c_get_clientdata(client);
 | ||
| 
 | ||
| 	if (type != I2C_PROTOCOL_SMBUS_ALERT)
 | ||
| 		return;
 | ||
| 
 | ||
| 	ltc4162l_clear_interrupts(info);
 | ||
| 	power_supply_changed(info->charger);
 | ||
| }
 | ||
| 
 | ||
| static const struct i2c_device_id ltc4162l_i2c_id_table[] = {
 | ||
| 	{ "ltc4162-l", 0 },
 | ||
| 	{ },
 | ||
| };
 | ||
| MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table);
 | ||
| 
 | ||
| static const struct of_device_id ltc4162l_of_match[] = {
 | ||
| 	{ .compatible = "lltc,ltc4162-l", },
 | ||
| 	{ },
 | ||
| };
 | ||
| MODULE_DEVICE_TABLE(of, ltc4162l_of_match);
 | ||
| 
 | ||
| static struct i2c_driver ltc4162l_driver = {
 | ||
| 	.probe		= ltc4162l_probe,
 | ||
| 	.alert		= ltc4162l_alert,
 | ||
| 	.id_table	= ltc4162l_i2c_id_table,
 | ||
| 	.driver = {
 | ||
| 		.name		= "ltc4162-l-charger",
 | ||
| 		.of_match_table	= of_match_ptr(ltc4162l_of_match),
 | ||
| 	},
 | ||
| };
 | ||
| module_i2c_driver(ltc4162l_driver);
 | ||
| 
 | ||
| MODULE_LICENSE("GPL");
 | ||
| MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
 | ||
| MODULE_DESCRIPTION("LTC4162-L charger driver");
 |