661 lines
17 KiB
C
661 lines
17 KiB
C
/*
|
|
* Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
|
|
*
|
|
* Copyright 2016 Free Electrons NextThing Co.
|
|
* Quentin Schulz <quentin.schulz@free-electrons.com>
|
|
*
|
|
* This driver is based on a previous upstreaming attempt by:
|
|
* Bruno Prémont <bonbons@linux-vserver.org>
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General
|
|
* Public License. See the file "COPYING" in the main directory of this
|
|
* archive for more details.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/time.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/consumer.h>
|
|
#include <linux/mfd/axp20x.h>
|
|
|
|
#define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2)
|
|
|
|
#define AXP20X_PWR_OP_BATT_PRESENT BIT(5)
|
|
#define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3)
|
|
|
|
#define AXP209_FG_PERCENT GENMASK(6, 0)
|
|
#define AXP22X_FG_VALID BIT(7)
|
|
|
|
#define AXP20X_CHRG_CTRL1_ENABLE BIT(7)
|
|
#define AXP20X_CHRG_CTRL1_TGT_VOLT GENMASK(6, 5)
|
|
#define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5)
|
|
#define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5)
|
|
#define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5)
|
|
#define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5)
|
|
|
|
#define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5)
|
|
#define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5)
|
|
|
|
#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5)
|
|
|
|
#define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0)
|
|
|
|
#define AXP20X_V_OFF_MASK GENMASK(2, 0)
|
|
|
|
struct axp20x_batt_ps;
|
|
|
|
struct axp_data {
|
|
int ccc_scale;
|
|
int ccc_offset;
|
|
bool has_fg_valid;
|
|
int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
|
|
int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
|
|
};
|
|
|
|
struct axp20x_batt_ps {
|
|
struct regmap *regmap;
|
|
struct power_supply *batt;
|
|
struct device *dev;
|
|
struct iio_channel *batt_chrg_i;
|
|
struct iio_channel *batt_dischrg_i;
|
|
struct iio_channel *batt_v;
|
|
/* Maximum constant charge current */
|
|
unsigned int max_ccc;
|
|
const struct axp_data *data;
|
|
};
|
|
|
|
static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
|
|
int *val)
|
|
{
|
|
int ret, reg;
|
|
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
|
|
case AXP20X_CHRG_CTRL1_TGT_4_1V:
|
|
*val = 4100000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_15V:
|
|
*val = 4150000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_2V:
|
|
*val = 4200000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_36V:
|
|
*val = 4360000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
|
|
int *val)
|
|
{
|
|
int ret, reg;
|
|
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
|
|
case AXP20X_CHRG_CTRL1_TGT_4_1V:
|
|
*val = 4100000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_2V:
|
|
*val = 4200000;
|
|
break;
|
|
case AXP22X_CHRG_CTRL1_TGT_4_22V:
|
|
*val = 4220000;
|
|
break;
|
|
case AXP22X_CHRG_CTRL1_TGT_4_24V:
|
|
*val = 4240000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
|
|
int *val)
|
|
{
|
|
int ret, reg;
|
|
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
|
|
case AXP20X_CHRG_CTRL1_TGT_4_1V:
|
|
*val = 4100000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_15V:
|
|
*val = 4150000;
|
|
break;
|
|
case AXP20X_CHRG_CTRL1_TGT_4_2V:
|
|
*val = 4200000;
|
|
break;
|
|
case AXP813_CHRG_CTRL1_TGT_4_35V:
|
|
*val = 4350000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val &= AXP20X_CHRG_CTRL1_TGT_CURR;
|
|
|
|
*val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp20x_battery_get_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
|
|
int ret = 0, reg, val1;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
|
|
®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
|
|
®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
return 0;
|
|
}
|
|
|
|
ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
|
|
&val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val1) {
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
return 0;
|
|
}
|
|
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Fuel Gauge data takes 7 bits but the stored value seems to be
|
|
* directly the raw percentage without any scaling to 7 bits.
|
|
*/
|
|
if ((val1 & AXP209_FG_PERCENT) == 100)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
|
|
&val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
|
|
val->intval = POWER_SUPPLY_HEALTH_DEAD;
|
|
return 0;
|
|
}
|
|
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
ret = axp20x_get_constant_charge_current(axp20x_batt,
|
|
&val->intval);
|
|
if (ret)
|
|
return ret;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
val->intval = axp20x_batt->max_ccc;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
|
|
®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
|
|
ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval);
|
|
} else {
|
|
ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1);
|
|
val->intval = -val1;
|
|
}
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* IIO framework gives mA but Power Supply framework gives uA */
|
|
val->intval *= 1000;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
/* When no battery is present, return capacity is 100% */
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
|
|
®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
|
|
val->intval = 100;
|
|
return 0;
|
|
}
|
|
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Fuel Gauge data takes 7 bits but the stored value seems to be
|
|
* directly the raw percentage without any scaling to 7 bits.
|
|
*/
|
|
val->intval = reg & AXP209_FG_PERCENT;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
|
|
return axp20x_batt->data->get_max_voltage(axp20x_batt,
|
|
&val->intval);
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
|
|
ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = iio_read_channel_processed(axp20x_batt->batt_v,
|
|
&val->intval);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* IIO framework gives mV but Power Supply framework gives uV */
|
|
val->intval *= 1000;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
|
|
int val)
|
|
{
|
|
switch (val) {
|
|
case 4100000:
|
|
val = AXP20X_CHRG_CTRL1_TGT_4_1V;
|
|
break;
|
|
|
|
case 4200000:
|
|
val = AXP20X_CHRG_CTRL1_TGT_4_2V;
|
|
break;
|
|
|
|
default:
|
|
/*
|
|
* AXP20x max voltage can be set to 4.36V and AXP22X max voltage
|
|
* can be set to 4.22V and 4.24V, but these voltages are too
|
|
* high for Lithium based batteries (AXP PMICs are supposed to
|
|
* be used with these kinds of battery).
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
|
|
AXP20X_CHRG_CTRL1_TGT_VOLT, val);
|
|
}
|
|
|
|
static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
|
|
int val)
|
|
{
|
|
switch (val) {
|
|
case 4100000:
|
|
val = AXP20X_CHRG_CTRL1_TGT_4_1V;
|
|
break;
|
|
|
|
case 4150000:
|
|
val = AXP20X_CHRG_CTRL1_TGT_4_15V;
|
|
break;
|
|
|
|
case 4200000:
|
|
val = AXP20X_CHRG_CTRL1_TGT_4_2V;
|
|
break;
|
|
|
|
default:
|
|
/*
|
|
* AXP20x max voltage can be set to 4.36V and AXP22X max voltage
|
|
* can be set to 4.22V and 4.24V, but these voltages are too
|
|
* high for Lithium based batteries (AXP PMICs are supposed to
|
|
* be used with these kinds of battery).
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
|
|
AXP20X_CHRG_CTRL1_TGT_VOLT, val);
|
|
}
|
|
|
|
static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
|
|
int charge_current)
|
|
{
|
|
if (charge_current > axp_batt->max_ccc)
|
|
return -EINVAL;
|
|
|
|
charge_current = (charge_current - axp_batt->data->ccc_offset) /
|
|
axp_batt->data->ccc_scale;
|
|
|
|
if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
|
|
return -EINVAL;
|
|
|
|
return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
|
|
AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
|
|
}
|
|
|
|
static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
|
|
int charge_current)
|
|
{
|
|
bool lower_max = false;
|
|
|
|
charge_current = (charge_current - axp->data->ccc_offset) /
|
|
axp->data->ccc_scale;
|
|
|
|
if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
|
|
return -EINVAL;
|
|
|
|
charge_current = charge_current * axp->data->ccc_scale +
|
|
axp->data->ccc_offset;
|
|
|
|
if (charge_current > axp->max_ccc)
|
|
dev_warn(axp->dev,
|
|
"Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
|
|
else
|
|
lower_max = true;
|
|
|
|
axp->max_ccc = charge_current;
|
|
|
|
if (lower_max) {
|
|
int current_cc;
|
|
|
|
axp20x_get_constant_charge_current(axp, ¤t_cc);
|
|
if (current_cc > charge_current)
|
|
axp20x_set_constant_charge_current(axp, charge_current);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
|
|
int min_voltage)
|
|
{
|
|
int val1 = (min_voltage - 2600000) / 100000;
|
|
|
|
if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
|
|
return -EINVAL;
|
|
|
|
return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
|
|
AXP20X_V_OFF_MASK, val1);
|
|
}
|
|
|
|
static int axp20x_battery_set_prop(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
|
|
return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
|
|
return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
return axp20x_set_constant_charge_current(axp20x_batt,
|
|
val->intval);
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
return axp20x_set_max_constant_charge_current(axp20x_batt,
|
|
val->intval);
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
switch (val->intval) {
|
|
case POWER_SUPPLY_STATUS_CHARGING:
|
|
return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
|
|
AXP20X_CHRG_CTRL1_ENABLE, AXP20X_CHRG_CTRL1_ENABLE);
|
|
|
|
case POWER_SUPPLY_STATUS_DISCHARGING:
|
|
case POWER_SUPPLY_STATUS_NOT_CHARGING:
|
|
return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
|
|
AXP20X_CHRG_CTRL1_ENABLE, 0);
|
|
}
|
|
fallthrough;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static enum power_supply_property axp20x_battery_props[] = {
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
|
|
POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
};
|
|
|
|
static int axp20x_battery_prop_writeable(struct power_supply *psy,
|
|
enum power_supply_property psp)
|
|
{
|
|
return psp == POWER_SUPPLY_PROP_STATUS ||
|
|
psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
|
|
psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
|
|
psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
|
|
psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
|
|
}
|
|
|
|
static const struct power_supply_desc axp20x_batt_ps_desc = {
|
|
.name = "axp20x-battery",
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.properties = axp20x_battery_props,
|
|
.num_properties = ARRAY_SIZE(axp20x_battery_props),
|
|
.property_is_writeable = axp20x_battery_prop_writeable,
|
|
.get_property = axp20x_battery_get_prop,
|
|
.set_property = axp20x_battery_set_prop,
|
|
};
|
|
|
|
static const struct axp_data axp209_data = {
|
|
.ccc_scale = 100000,
|
|
.ccc_offset = 300000,
|
|
.get_max_voltage = axp20x_battery_get_max_voltage,
|
|
.set_max_voltage = axp20x_battery_set_max_voltage,
|
|
};
|
|
|
|
static const struct axp_data axp221_data = {
|
|
.ccc_scale = 150000,
|
|
.ccc_offset = 300000,
|
|
.has_fg_valid = true,
|
|
.get_max_voltage = axp22x_battery_get_max_voltage,
|
|
.set_max_voltage = axp22x_battery_set_max_voltage,
|
|
};
|
|
|
|
static const struct axp_data axp813_data = {
|
|
.ccc_scale = 200000,
|
|
.ccc_offset = 200000,
|
|
.has_fg_valid = true,
|
|
.get_max_voltage = axp813_battery_get_max_voltage,
|
|
.set_max_voltage = axp20x_battery_set_max_voltage,
|
|
};
|
|
|
|
static const struct of_device_id axp20x_battery_ps_id[] = {
|
|
{
|
|
.compatible = "x-powers,axp209-battery-power-supply",
|
|
.data = (void *)&axp209_data,
|
|
}, {
|
|
.compatible = "x-powers,axp221-battery-power-supply",
|
|
.data = (void *)&axp221_data,
|
|
}, {
|
|
.compatible = "x-powers,axp813-battery-power-supply",
|
|
.data = (void *)&axp813_data,
|
|
}, { /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
|
|
|
|
static int axp20x_power_probe(struct platform_device *pdev)
|
|
{
|
|
struct axp20x_batt_ps *axp20x_batt;
|
|
struct power_supply_config psy_cfg = {};
|
|
struct power_supply_battery_info *info;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
if (!of_device_is_available(pdev->dev.of_node))
|
|
return -ENODEV;
|
|
|
|
axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
|
|
GFP_KERNEL);
|
|
if (!axp20x_batt)
|
|
return -ENOMEM;
|
|
|
|
axp20x_batt->dev = &pdev->dev;
|
|
|
|
axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
|
|
if (IS_ERR(axp20x_batt->batt_v)) {
|
|
if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
|
|
return -EPROBE_DEFER;
|
|
return PTR_ERR(axp20x_batt->batt_v);
|
|
}
|
|
|
|
axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
|
|
"batt_chrg_i");
|
|
if (IS_ERR(axp20x_batt->batt_chrg_i)) {
|
|
if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
|
|
return -EPROBE_DEFER;
|
|
return PTR_ERR(axp20x_batt->batt_chrg_i);
|
|
}
|
|
|
|
axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
|
|
"batt_dischrg_i");
|
|
if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
|
|
if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
|
|
return -EPROBE_DEFER;
|
|
return PTR_ERR(axp20x_batt->batt_dischrg_i);
|
|
}
|
|
|
|
axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
platform_set_drvdata(pdev, axp20x_batt);
|
|
|
|
psy_cfg.drv_data = axp20x_batt;
|
|
psy_cfg.of_node = pdev->dev.of_node;
|
|
|
|
axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
|
|
|
|
axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
|
|
&axp20x_batt_ps_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(axp20x_batt->batt)) {
|
|
dev_err(&pdev->dev, "failed to register power supply: %ld\n",
|
|
PTR_ERR(axp20x_batt->batt));
|
|
return PTR_ERR(axp20x_batt->batt);
|
|
}
|
|
|
|
if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
|
|
int vmin = info->voltage_min_design_uv;
|
|
int ccc = info->constant_charge_current_max_ua;
|
|
|
|
if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
|
|
vmin))
|
|
dev_err(&pdev->dev,
|
|
"couldn't set voltage_min_design\n");
|
|
|
|
/* Set max to unverified value to be able to set CCC */
|
|
axp20x_batt->max_ccc = ccc;
|
|
|
|
if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
|
|
ccc)) {
|
|
dev_err(&pdev->dev,
|
|
"couldn't set constant charge current from DT: fallback to minimum value\n");
|
|
ccc = 300000;
|
|
axp20x_batt->max_ccc = ccc;
|
|
axp20x_set_constant_charge_current(axp20x_batt, ccc);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Update max CCC to a valid value if battery info is present or set it
|
|
* to current register value by default.
|
|
*/
|
|
axp20x_get_constant_charge_current(axp20x_batt,
|
|
&axp20x_batt->max_ccc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver axp20x_batt_driver = {
|
|
.probe = axp20x_power_probe,
|
|
.driver = {
|
|
.name = "axp20x-battery-power-supply",
|
|
.of_match_table = axp20x_battery_ps_id,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(axp20x_batt_driver);
|
|
|
|
MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
|
|
MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
|
|
MODULE_LICENSE("GPL");
|