1227 lines
35 KiB
C
1227 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* MHI PCI driver - MHI over PCI controller driver
|
|
*
|
|
* This module is a generic driver for registering MHI-over-PCI devices,
|
|
* such as PCIe QCOM modems.
|
|
*
|
|
* Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
|
|
*/
|
|
|
|
#include <linux/aer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mhi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#define MHI_PCI_DEFAULT_BAR_NUM 0
|
|
|
|
#define MHI_POST_RESET_DELAY_MS 2000
|
|
|
|
#define HEALTH_CHECK_PERIOD (HZ * 2)
|
|
|
|
/**
|
|
* struct mhi_pci_dev_info - MHI PCI device specific information
|
|
* @config: MHI controller configuration
|
|
* @name: name of the PCI module
|
|
* @fw: firmware path (if any)
|
|
* @edl: emergency download mode firmware path (if any)
|
|
* @bar_num: PCI base address register to use for MHI MMIO register space
|
|
* @dma_data_width: DMA transfer word size (32 or 64 bits)
|
|
* @mru_default: default MRU size for MBIM network packets
|
|
* @sideband_wake: Devices using dedicated sideband GPIO for wakeup instead
|
|
* of inband wake support (such as sdx24)
|
|
*/
|
|
struct mhi_pci_dev_info {
|
|
const struct mhi_controller_config *config;
|
|
const char *name;
|
|
const char *fw;
|
|
const char *edl;
|
|
unsigned int bar_num;
|
|
unsigned int dma_data_width;
|
|
unsigned int mru_default;
|
|
bool sideband_wake;
|
|
};
|
|
|
|
#define MHI_CHANNEL_CONFIG_UL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_TO_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_AMSS), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
} \
|
|
|
|
#define MHI_CHANNEL_CONFIG_DL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_FROM_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_AMSS), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
}
|
|
|
|
#define MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_FROM_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_AMSS), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
.auto_queue = true, \
|
|
}
|
|
|
|
#define MHI_EVENT_CONFIG_CTRL(ev_ring, el_count) \
|
|
{ \
|
|
.num_elements = el_count, \
|
|
.irq_moderation_ms = 0, \
|
|
.irq = (ev_ring) + 1, \
|
|
.priority = 1, \
|
|
.mode = MHI_DB_BRST_DISABLE, \
|
|
.data_type = MHI_ER_CTRL, \
|
|
.hardware_event = false, \
|
|
.client_managed = false, \
|
|
.offload_channel = false, \
|
|
}
|
|
|
|
#define MHI_CHANNEL_CONFIG_HW_UL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_TO_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_AMSS), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_ENABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = true, \
|
|
} \
|
|
|
|
#define MHI_CHANNEL_CONFIG_HW_DL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_FROM_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_AMSS), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_ENABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = true, \
|
|
}
|
|
|
|
#define MHI_CHANNEL_CONFIG_UL_SBL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_TO_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_SBL), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
} \
|
|
|
|
#define MHI_CHANNEL_CONFIG_DL_SBL(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_FROM_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_SBL), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
}
|
|
|
|
#define MHI_CHANNEL_CONFIG_UL_FP(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_TO_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_FP), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
} \
|
|
|
|
#define MHI_CHANNEL_CONFIG_DL_FP(ch_num, ch_name, el_count, ev_ring) \
|
|
{ \
|
|
.num = ch_num, \
|
|
.name = ch_name, \
|
|
.num_elements = el_count, \
|
|
.event_ring = ev_ring, \
|
|
.dir = DMA_FROM_DEVICE, \
|
|
.ee_mask = BIT(MHI_EE_FP), \
|
|
.pollcfg = 0, \
|
|
.doorbell = MHI_DB_BRST_DISABLE, \
|
|
.lpm_notify = false, \
|
|
.offload_channel = false, \
|
|
.doorbell_mode_switch = false, \
|
|
}
|
|
|
|
#define MHI_EVENT_CONFIG_DATA(ev_ring, el_count) \
|
|
{ \
|
|
.num_elements = el_count, \
|
|
.irq_moderation_ms = 5, \
|
|
.irq = (ev_ring) + 1, \
|
|
.priority = 1, \
|
|
.mode = MHI_DB_BRST_DISABLE, \
|
|
.data_type = MHI_ER_DATA, \
|
|
.hardware_event = false, \
|
|
.client_managed = false, \
|
|
.offload_channel = false, \
|
|
}
|
|
|
|
#define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \
|
|
{ \
|
|
.num_elements = el_count, \
|
|
.irq_moderation_ms = 1, \
|
|
.irq = (ev_ring) + 1, \
|
|
.priority = 1, \
|
|
.mode = MHI_DB_BRST_DISABLE, \
|
|
.data_type = MHI_ER_DATA, \
|
|
.hardware_event = true, \
|
|
.client_managed = false, \
|
|
.offload_channel = false, \
|
|
.channel = ch_num, \
|
|
}
|
|
|
|
static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 16, 1),
|
|
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 16, 1),
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 4, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 4, 0),
|
|
MHI_CHANNEL_CONFIG_UL(14, "QMI", 4, 0),
|
|
MHI_CHANNEL_CONFIG_DL(15, "QMI", 4, 0),
|
|
MHI_CHANNEL_CONFIG_UL(20, "IPCR", 8, 0),
|
|
MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
|
|
MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
|
|
};
|
|
|
|
static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
|
|
/* first ring is control+data ring */
|
|
MHI_EVENT_CONFIG_CTRL(0, 64),
|
|
/* DIAG dedicated event ring */
|
|
MHI_EVENT_CONFIG_DATA(1, 128),
|
|
/* Hardware channels request dedicated hardware event rings */
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 8000,
|
|
.num_channels = ARRAY_SIZE(modem_qcom_v1_mhi_channels),
|
|
.ch_cfg = modem_qcom_v1_mhi_channels,
|
|
.num_events = ARRAY_SIZE(modem_qcom_v1_mhi_events),
|
|
.event_cfg = modem_qcom_v1_mhi_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_qcom_sdx65_info = {
|
|
.name = "qcom-sdx65m",
|
|
.fw = "qcom/sdx65m/xbl.elf",
|
|
.edl = "qcom/sdx65m/edl.mbn",
|
|
.config = &modem_qcom_v1_mhiv_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_qcom_sdx55_info = {
|
|
.name = "qcom-sdx55m",
|
|
.fw = "qcom/sdx55m/sbl1.mbn",
|
|
.edl = "qcom/sdx55m/edl.mbn",
|
|
.config = &modem_qcom_v1_mhiv_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_qcom_sdx24_info = {
|
|
.name = "qcom-sdx24",
|
|
.edl = "qcom/prog_firehose_sdx24.mbn",
|
|
.config = &modem_qcom_v1_mhiv_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.sideband_wake = true,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_quectel_em1xx_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL(0, "NMEA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(1, "NMEA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
|
|
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
|
|
/* The EDL firmware is a flash-programmer exposing firehose protocol */
|
|
MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
|
|
};
|
|
|
|
static struct mhi_event_config mhi_quectel_em1xx_events[] = {
|
|
MHI_EVENT_CONFIG_CTRL(0, 128),
|
|
MHI_EVENT_CONFIG_DATA(1, 128),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_quectel_em1xx_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 20000,
|
|
.num_channels = ARRAY_SIZE(mhi_quectel_em1xx_channels),
|
|
.ch_cfg = mhi_quectel_em1xx_channels,
|
|
.num_events = ARRAY_SIZE(mhi_quectel_em1xx_events),
|
|
.event_cfg = mhi_quectel_em1xx_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_quectel_em1xx_info = {
|
|
.name = "quectel-em1xx",
|
|
.edl = "qcom/prog_firehose_sdx24.mbn",
|
|
.config = &modem_quectel_em1xx_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
.sideband_wake = true,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 1),
|
|
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 1),
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
|
|
};
|
|
|
|
static struct mhi_event_config mhi_foxconn_sdx55_events[] = {
|
|
MHI_EVENT_CONFIG_CTRL(0, 128),
|
|
MHI_EVENT_CONFIG_DATA(1, 128),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101)
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_foxconn_sdx55_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 20000,
|
|
.num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
|
|
.ch_cfg = mhi_foxconn_sdx55_channels,
|
|
.num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
|
|
.event_cfg = mhi_foxconn_sdx55_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
|
|
.name = "foxconn-sdx55",
|
|
.fw = "qcom/sdx55m/sbl1.mbn",
|
|
.edl = "qcom/sdx55m/edl.mbn",
|
|
.config = &modem_foxconn_sdx55_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = {
|
|
.name = "foxconn-sdx65",
|
|
.config = &modem_foxconn_sdx55_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_mv3x_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL(0, "LOOPBACK", 64, 0),
|
|
MHI_CHANNEL_CONFIG_DL(1, "LOOPBACK", 64, 0),
|
|
/* MBIM Control Channel */
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 64, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 64, 0),
|
|
/* MBIM Data Channel */
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 512, 2),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 512, 3),
|
|
};
|
|
|
|
static struct mhi_event_config mhi_mv3x_events[] = {
|
|
MHI_EVENT_CONFIG_CTRL(0, 256),
|
|
MHI_EVENT_CONFIG_DATA(1, 256),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(3, 1024, 101),
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_mv3x_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 20000,
|
|
.num_channels = ARRAY_SIZE(mhi_mv3x_channels),
|
|
.ch_cfg = mhi_mv3x_channels,
|
|
.num_events = ARRAY_SIZE(mhi_mv3x_events),
|
|
.event_cfg = mhi_mv3x_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_mv31_info = {
|
|
.name = "cinterion-mv31",
|
|
.config = &modem_mv3x_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_mv32_info = {
|
|
.name = "cinterion-mv32",
|
|
.config = &modem_mv3x_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_sierra_em919x_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 256, 0),
|
|
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 128, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 128, 0),
|
|
MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 512, 1),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 512, 2),
|
|
};
|
|
|
|
static struct mhi_event_config modem_sierra_em919x_mhi_events[] = {
|
|
/* first ring is control+data and DIAG ring */
|
|
MHI_EVENT_CONFIG_CTRL(0, 2048),
|
|
/* Hardware channels request dedicated hardware event rings */
|
|
MHI_EVENT_CONFIG_HW_DATA(1, 2048, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_sierra_em919x_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 24000,
|
|
.num_channels = ARRAY_SIZE(mhi_sierra_em919x_channels),
|
|
.ch_cfg = mhi_sierra_em919x_channels,
|
|
.num_events = ARRAY_SIZE(modem_sierra_em919x_mhi_events),
|
|
.event_cfg = modem_sierra_em919x_mhi_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_sierra_em919x_info = {
|
|
.name = "sierra-em919x",
|
|
.config = &modem_sierra_em919x_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL(14, "QMI", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(15, "QMI", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(20, "IPCR", 16, 0),
|
|
MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 16, 0),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 1),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 2),
|
|
};
|
|
|
|
static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = {
|
|
MHI_EVENT_CONFIG_CTRL(0, 128),
|
|
MHI_EVENT_CONFIG_HW_DATA(1, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 2048, 101)
|
|
};
|
|
|
|
static struct mhi_controller_config modem_telit_fn980_hw_v1_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 20000,
|
|
.num_channels = ARRAY_SIZE(mhi_telit_fn980_hw_v1_channels),
|
|
.ch_cfg = mhi_telit_fn980_hw_v1_channels,
|
|
.num_events = ARRAY_SIZE(mhi_telit_fn980_hw_v1_events),
|
|
.event_cfg = mhi_telit_fn980_hw_v1_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = {
|
|
.name = "telit-fn980-hwv1",
|
|
.fw = "qcom/sdx55m/sbl1.mbn",
|
|
.edl = "qcom/sdx55m/edl.mbn",
|
|
.config = &modem_telit_fn980_hw_v1_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.mru_default = 32768,
|
|
.sideband_wake = false,
|
|
};
|
|
|
|
static const struct mhi_channel_config mhi_telit_fn990_channels[] = {
|
|
MHI_CHANNEL_CONFIG_UL_SBL(2, "SAHARA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL_SBL(3, "SAHARA", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(4, "DIAG", 64, 1),
|
|
MHI_CHANNEL_CONFIG_DL(5, "DIAG", 64, 1),
|
|
MHI_CHANNEL_CONFIG_UL(12, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
|
|
MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1),
|
|
MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1),
|
|
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
|
|
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
|
|
};
|
|
|
|
static struct mhi_event_config mhi_telit_fn990_events[] = {
|
|
MHI_EVENT_CONFIG_CTRL(0, 128),
|
|
MHI_EVENT_CONFIG_DATA(1, 128),
|
|
MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
|
|
MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
|
|
};
|
|
|
|
static const struct mhi_controller_config modem_telit_fn990_config = {
|
|
.max_channels = 128,
|
|
.timeout_ms = 20000,
|
|
.num_channels = ARRAY_SIZE(mhi_telit_fn990_channels),
|
|
.ch_cfg = mhi_telit_fn990_channels,
|
|
.num_events = ARRAY_SIZE(mhi_telit_fn990_events),
|
|
.event_cfg = mhi_telit_fn990_events,
|
|
};
|
|
|
|
static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
|
|
.name = "telit-fn990",
|
|
.config = &modem_telit_fn990_config,
|
|
.bar_num = MHI_PCI_DEFAULT_BAR_NUM,
|
|
.dma_data_width = 32,
|
|
.sideband_wake = false,
|
|
.mru_default = 32768,
|
|
};
|
|
|
|
/* Keep the list sorted based on the PID. New VID should be added as the last entry */
|
|
static const struct pci_device_id mhi_pci_id_table[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
|
|
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
|
|
/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
|
|
.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
|
|
/* Telit FN980 hardware revision v1 */
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000),
|
|
.driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306),
|
|
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info },
|
|
/* Telit FN990 */
|
|
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0308, 0x1c5d, 0x2010),
|
|
.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
|
|
.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
|
|
{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
|
|
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
|
|
{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
|
|
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
|
|
{ PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
|
|
.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
|
|
/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
|
|
/* DW5930e (sdx55), With eSIM, It's also T99W175 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b0),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
|
|
/* DW5930e (sdx55), Non-eSIM, It's also T99W175 */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
|
|
/* T99W175 (sdx55), Based on Qualcomm new baseline */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
|
|
/* T99W175 (sdx55) */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0c3),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
|
|
/* T99W368 (sdx65) */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d8),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
|
|
/* T99W373 (sdx62) */
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
|
|
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
|
|
/* MV31-W (Cinterion) */
|
|
{ PCI_DEVICE(0x1269, 0x00b3),
|
|
.driver_data = (kernel_ulong_t) &mhi_mv31_info },
|
|
/* MV31-W (Cinterion), based on new baseline */
|
|
{ PCI_DEVICE(0x1269, 0x00b4),
|
|
.driver_data = (kernel_ulong_t) &mhi_mv31_info },
|
|
/* MV32-WA (Cinterion) */
|
|
{ PCI_DEVICE(0x1269, 0x00ba),
|
|
.driver_data = (kernel_ulong_t) &mhi_mv32_info },
|
|
/* MV32-WB (Cinterion) */
|
|
{ PCI_DEVICE(0x1269, 0x00bb),
|
|
.driver_data = (kernel_ulong_t) &mhi_mv32_info },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, mhi_pci_id_table);
|
|
|
|
enum mhi_pci_device_status {
|
|
MHI_PCI_DEV_STARTED,
|
|
MHI_PCI_DEV_SUSPENDED,
|
|
};
|
|
|
|
struct mhi_pci_device {
|
|
struct mhi_controller mhi_cntrl;
|
|
struct pci_saved_state *pci_state;
|
|
struct work_struct recovery_work;
|
|
struct timer_list health_check_timer;
|
|
unsigned long status;
|
|
};
|
|
|
|
static int mhi_pci_read_reg(struct mhi_controller *mhi_cntrl,
|
|
void __iomem *addr, u32 *out)
|
|
{
|
|
*out = readl(addr);
|
|
return 0;
|
|
}
|
|
|
|
static void mhi_pci_write_reg(struct mhi_controller *mhi_cntrl,
|
|
void __iomem *addr, u32 val)
|
|
{
|
|
writel(val, addr);
|
|
}
|
|
|
|
static void mhi_pci_status_cb(struct mhi_controller *mhi_cntrl,
|
|
enum mhi_callback cb)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
|
|
|
|
/* Nothing to do for now */
|
|
switch (cb) {
|
|
case MHI_CB_FATAL_ERROR:
|
|
case MHI_CB_SYS_ERROR:
|
|
dev_warn(&pdev->dev, "firmware crashed (%u)\n", cb);
|
|
pm_runtime_forbid(&pdev->dev);
|
|
break;
|
|
case MHI_CB_EE_MISSION_MODE:
|
|
pm_runtime_allow(&pdev->dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void mhi_pci_wake_get_nop(struct mhi_controller *mhi_cntrl, bool force)
|
|
{
|
|
/* no-op */
|
|
}
|
|
|
|
static void mhi_pci_wake_put_nop(struct mhi_controller *mhi_cntrl, bool override)
|
|
{
|
|
/* no-op */
|
|
}
|
|
|
|
static void mhi_pci_wake_toggle_nop(struct mhi_controller *mhi_cntrl)
|
|
{
|
|
/* no-op */
|
|
}
|
|
|
|
static bool mhi_pci_is_alive(struct mhi_controller *mhi_cntrl)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
|
|
u16 vendor = 0;
|
|
|
|
if (pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor))
|
|
return false;
|
|
|
|
if (vendor == (u16) ~0 || vendor == 0)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int mhi_pci_claim(struct mhi_controller *mhi_cntrl,
|
|
unsigned int bar_num, u64 dma_mask)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
|
|
int err;
|
|
|
|
err = pci_assign_resource(pdev, bar_num);
|
|
if (err)
|
|
return err;
|
|
|
|
err = pcim_enable_device(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to enable pci device: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = pcim_iomap_regions(pdev, 1 << bar_num, pci_name(pdev));
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to map pci region: %d\n", err);
|
|
return err;
|
|
}
|
|
mhi_cntrl->regs = pcim_iomap_table(pdev)[bar_num];
|
|
mhi_cntrl->reg_len = pci_resource_len(pdev, bar_num);
|
|
|
|
err = dma_set_mask_and_coherent(&pdev->dev, dma_mask);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Cannot set proper DMA mask\n");
|
|
return err;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhi_pci_get_irqs(struct mhi_controller *mhi_cntrl,
|
|
const struct mhi_controller_config *mhi_cntrl_config)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
|
|
int nr_vectors, i;
|
|
int *irq;
|
|
|
|
/*
|
|
* Alloc one MSI vector for BHI + one vector per event ring, ideally...
|
|
* No explicit pci_free_irq_vectors required, done by pcim_release.
|
|
*/
|
|
mhi_cntrl->nr_irqs = 1 + mhi_cntrl_config->num_events;
|
|
|
|
nr_vectors = pci_alloc_irq_vectors(pdev, 1, mhi_cntrl->nr_irqs, PCI_IRQ_MSI);
|
|
if (nr_vectors < 0) {
|
|
dev_err(&pdev->dev, "Error allocating MSI vectors %d\n",
|
|
nr_vectors);
|
|
return nr_vectors;
|
|
}
|
|
|
|
if (nr_vectors < mhi_cntrl->nr_irqs) {
|
|
dev_warn(&pdev->dev, "using shared MSI\n");
|
|
|
|
/* Patch msi vectors, use only one (shared) */
|
|
for (i = 0; i < mhi_cntrl_config->num_events; i++)
|
|
mhi_cntrl_config->event_cfg[i].irq = 0;
|
|
mhi_cntrl->nr_irqs = 1;
|
|
}
|
|
|
|
irq = devm_kcalloc(&pdev->dev, mhi_cntrl->nr_irqs, sizeof(int), GFP_KERNEL);
|
|
if (!irq)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < mhi_cntrl->nr_irqs; i++) {
|
|
int vector = i >= nr_vectors ? (nr_vectors - 1) : i;
|
|
|
|
irq[i] = pci_irq_vector(pdev, vector);
|
|
}
|
|
|
|
mhi_cntrl->irq = irq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mhi_pci_runtime_get(struct mhi_controller *mhi_cntrl)
|
|
{
|
|
/* The runtime_get() MHI callback means:
|
|
* Do whatever is requested to leave M3.
|
|
*/
|
|
return pm_runtime_get(mhi_cntrl->cntrl_dev);
|
|
}
|
|
|
|
static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
|
|
{
|
|
/* The runtime_put() MHI callback means:
|
|
* Device can be moved in M3 state.
|
|
*/
|
|
pm_runtime_mark_last_busy(mhi_cntrl->cntrl_dev);
|
|
pm_runtime_put(mhi_cntrl->cntrl_dev);
|
|
}
|
|
|
|
static void mhi_pci_recovery_work(struct work_struct *work)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,
|
|
recovery_work);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
|
|
int err;
|
|
|
|
dev_warn(&pdev->dev, "device recovery started\n");
|
|
|
|
del_timer(&mhi_pdev->health_check_timer);
|
|
pm_runtime_forbid(&pdev->dev);
|
|
|
|
/* Clean up MHI state */
|
|
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
|
|
mhi_power_down(mhi_cntrl, false);
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
}
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_load_saved_state(pdev, mhi_pdev->pci_state);
|
|
pci_restore_state(pdev);
|
|
|
|
if (!mhi_pci_is_alive(mhi_cntrl))
|
|
goto err_try_reset;
|
|
|
|
err = mhi_prepare_for_power_up(mhi_cntrl);
|
|
if (err)
|
|
goto err_try_reset;
|
|
|
|
err = mhi_sync_power_up(mhi_cntrl);
|
|
if (err)
|
|
goto err_unprepare;
|
|
|
|
dev_dbg(&pdev->dev, "Recovery completed\n");
|
|
|
|
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
|
|
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
|
|
return;
|
|
|
|
err_unprepare:
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
err_try_reset:
|
|
if (pci_reset_function(pdev))
|
|
dev_err(&pdev->dev, "Recovery failed\n");
|
|
}
|
|
|
|
static void health_check(struct timer_list *t)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = from_timer(mhi_pdev, t, health_check_timer);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
|
|
test_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
|
|
return;
|
|
|
|
if (!mhi_pci_is_alive(mhi_cntrl)) {
|
|
dev_err(mhi_cntrl->cntrl_dev, "Device died\n");
|
|
queue_work(system_long_wq, &mhi_pdev->recovery_work);
|
|
return;
|
|
}
|
|
|
|
/* reschedule in two seconds */
|
|
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
|
|
}
|
|
|
|
static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
|
|
const struct mhi_controller_config *mhi_cntrl_config;
|
|
struct mhi_pci_device *mhi_pdev;
|
|
struct mhi_controller *mhi_cntrl;
|
|
int err;
|
|
|
|
dev_info(&pdev->dev, "MHI PCI device found: %s\n", info->name);
|
|
|
|
/* mhi_pdev.mhi_cntrl must be zero-initialized */
|
|
mhi_pdev = devm_kzalloc(&pdev->dev, sizeof(*mhi_pdev), GFP_KERNEL);
|
|
if (!mhi_pdev)
|
|
return -ENOMEM;
|
|
|
|
INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);
|
|
timer_setup(&mhi_pdev->health_check_timer, health_check, 0);
|
|
|
|
mhi_cntrl_config = info->config;
|
|
mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
mhi_cntrl->cntrl_dev = &pdev->dev;
|
|
mhi_cntrl->iova_start = 0;
|
|
mhi_cntrl->iova_stop = (dma_addr_t)DMA_BIT_MASK(info->dma_data_width);
|
|
mhi_cntrl->fw_image = info->fw;
|
|
mhi_cntrl->edl_image = info->edl;
|
|
|
|
mhi_cntrl->read_reg = mhi_pci_read_reg;
|
|
mhi_cntrl->write_reg = mhi_pci_write_reg;
|
|
mhi_cntrl->status_cb = mhi_pci_status_cb;
|
|
mhi_cntrl->runtime_get = mhi_pci_runtime_get;
|
|
mhi_cntrl->runtime_put = mhi_pci_runtime_put;
|
|
mhi_cntrl->mru = info->mru_default;
|
|
|
|
if (info->sideband_wake) {
|
|
mhi_cntrl->wake_get = mhi_pci_wake_get_nop;
|
|
mhi_cntrl->wake_put = mhi_pci_wake_put_nop;
|
|
mhi_cntrl->wake_toggle = mhi_pci_wake_toggle_nop;
|
|
}
|
|
|
|
err = mhi_pci_claim(mhi_cntrl, info->bar_num, DMA_BIT_MASK(info->dma_data_width));
|
|
if (err)
|
|
return err;
|
|
|
|
err = mhi_pci_get_irqs(mhi_cntrl, mhi_cntrl_config);
|
|
if (err)
|
|
return err;
|
|
|
|
pci_set_drvdata(pdev, mhi_pdev);
|
|
|
|
/* Have stored pci confspace at hand for restore in sudden PCI error.
|
|
* cache the state locally and discard the PCI core one.
|
|
*/
|
|
pci_save_state(pdev);
|
|
mhi_pdev->pci_state = pci_store_saved_state(pdev);
|
|
pci_load_saved_state(pdev, NULL);
|
|
|
|
pci_enable_pcie_error_reporting(pdev);
|
|
|
|
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
|
|
if (err)
|
|
goto err_disable_reporting;
|
|
|
|
/* MHI bus does not power up the controller by default */
|
|
err = mhi_prepare_for_power_up(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to prepare MHI controller\n");
|
|
goto err_unregister;
|
|
}
|
|
|
|
err = mhi_sync_power_up(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to power up MHI controller\n");
|
|
goto err_unprepare;
|
|
}
|
|
|
|
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
|
|
|
|
/* start health check */
|
|
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
|
|
|
|
/* Only allow runtime-suspend if PME capable (for wakeup) */
|
|
if (pci_pme_capable(pdev, PCI_D3hot)) {
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_mark_last_busy(&pdev->dev);
|
|
pm_runtime_put_noidle(&pdev->dev);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_unprepare:
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
err_unregister:
|
|
mhi_unregister_controller(mhi_cntrl);
|
|
err_disable_reporting:
|
|
pci_disable_pcie_error_reporting(pdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void mhi_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
del_timer_sync(&mhi_pdev->health_check_timer);
|
|
cancel_work_sync(&mhi_pdev->recovery_work);
|
|
|
|
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
|
|
mhi_power_down(mhi_cntrl, true);
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
}
|
|
|
|
/* balancing probe put_noidle */
|
|
if (pci_pme_capable(pdev, PCI_D3hot))
|
|
pm_runtime_get_noresume(&pdev->dev);
|
|
|
|
mhi_unregister_controller(mhi_cntrl);
|
|
pci_disable_pcie_error_reporting(pdev);
|
|
}
|
|
|
|
static void mhi_pci_shutdown(struct pci_dev *pdev)
|
|
{
|
|
mhi_pci_remove(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
|
|
static void mhi_pci_reset_prepare(struct pci_dev *pdev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
dev_info(&pdev->dev, "reset\n");
|
|
|
|
del_timer(&mhi_pdev->health_check_timer);
|
|
|
|
/* Clean up MHI state */
|
|
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
|
|
mhi_power_down(mhi_cntrl, false);
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
}
|
|
|
|
/* cause internal device reset */
|
|
mhi_soc_reset(mhi_cntrl);
|
|
|
|
/* Be sure device reset has been executed */
|
|
msleep(MHI_POST_RESET_DELAY_MS);
|
|
}
|
|
|
|
static void mhi_pci_reset_done(struct pci_dev *pdev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
int err;
|
|
|
|
/* Restore initial known working PCI state */
|
|
pci_load_saved_state(pdev, mhi_pdev->pci_state);
|
|
pci_restore_state(pdev);
|
|
|
|
/* Is device status available ? */
|
|
if (!mhi_pci_is_alive(mhi_cntrl)) {
|
|
dev_err(&pdev->dev, "reset failed\n");
|
|
return;
|
|
}
|
|
|
|
err = mhi_prepare_for_power_up(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to prepare MHI controller\n");
|
|
return;
|
|
}
|
|
|
|
err = mhi_sync_power_up(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to power up MHI controller\n");
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
return;
|
|
}
|
|
|
|
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
|
|
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
|
|
}
|
|
|
|
static pci_ers_result_t mhi_pci_error_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
dev_err(&pdev->dev, "PCI error detected, state = %u\n", state);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
/* Clean up MHI state */
|
|
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
|
|
mhi_power_down(mhi_cntrl, false);
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
} else {
|
|
/* Nothing to do */
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
static pci_ers_result_t mhi_pci_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
if (pci_enable_device(pdev)) {
|
|
dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n");
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
static void mhi_pci_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
|
|
|
|
dev_err(&pdev->dev, "PCI slot reset done\n");
|
|
|
|
queue_work(system_long_wq, &mhi_pdev->recovery_work);
|
|
}
|
|
|
|
static const struct pci_error_handlers mhi_pci_err_handler = {
|
|
.error_detected = mhi_pci_error_detected,
|
|
.slot_reset = mhi_pci_slot_reset,
|
|
.resume = mhi_pci_io_resume,
|
|
.reset_prepare = mhi_pci_reset_prepare,
|
|
.reset_done = mhi_pci_reset_done,
|
|
};
|
|
|
|
static int __maybe_unused mhi_pci_runtime_suspend(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
int err;
|
|
|
|
if (test_and_set_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
|
|
return 0;
|
|
|
|
del_timer(&mhi_pdev->health_check_timer);
|
|
cancel_work_sync(&mhi_pdev->recovery_work);
|
|
|
|
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
|
|
mhi_cntrl->ee != MHI_EE_AMSS)
|
|
goto pci_suspend; /* Nothing to do at MHI level */
|
|
|
|
/* Transition to M3 state */
|
|
err = mhi_pm_suspend(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to suspend device: %d\n", err);
|
|
clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status);
|
|
return -EBUSY;
|
|
}
|
|
|
|
pci_suspend:
|
|
pci_disable_device(pdev);
|
|
pci_wake_from_d3(pdev, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mhi_pci_runtime_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
int err;
|
|
|
|
if (!test_and_clear_bit(MHI_PCI_DEV_SUSPENDED, &mhi_pdev->status))
|
|
return 0;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err)
|
|
goto err_recovery;
|
|
|
|
pci_set_master(pdev);
|
|
pci_wake_from_d3(pdev, false);
|
|
|
|
if (!test_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status) ||
|
|
mhi_cntrl->ee != MHI_EE_AMSS)
|
|
return 0; /* Nothing to do at MHI level */
|
|
|
|
/* Exit M3, transition to M0 state */
|
|
err = mhi_pm_resume(mhi_cntrl);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to resume device: %d\n", err);
|
|
goto err_recovery;
|
|
}
|
|
|
|
/* Resume health check */
|
|
mod_timer(&mhi_pdev->health_check_timer, jiffies + HEALTH_CHECK_PERIOD);
|
|
|
|
/* It can be a remote wakeup (no mhi runtime_get), update access time */
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
return 0;
|
|
|
|
err_recovery:
|
|
/* Do not fail to not mess up our PCI device state, the device likely
|
|
* lost power (d3cold) and we simply need to reset it from the recovery
|
|
* procedure, trigger the recovery asynchronously to prevent system
|
|
* suspend exit delaying.
|
|
*/
|
|
queue_work(system_long_wq, &mhi_pdev->recovery_work);
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mhi_pci_suspend(struct device *dev)
|
|
{
|
|
pm_runtime_disable(dev);
|
|
return mhi_pci_runtime_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused mhi_pci_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* Depending the platform, device may have lost power (d3cold), we need
|
|
* to resume it now to check its state and recover when necessary.
|
|
*/
|
|
ret = mhi_pci_runtime_resume(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused mhi_pci_freeze(struct device *dev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
|
|
struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
|
|
|
|
/* We want to stop all operations, hibernation does not guarantee that
|
|
* device will be in the same state as before freezing, especially if
|
|
* the intermediate restore kernel reinitializes MHI device with new
|
|
* context.
|
|
*/
|
|
flush_work(&mhi_pdev->recovery_work);
|
|
if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
|
|
mhi_power_down(mhi_cntrl, true);
|
|
mhi_unprepare_after_power_down(mhi_cntrl);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused mhi_pci_restore(struct device *dev)
|
|
{
|
|
struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
|
|
|
|
/* Reinitialize the device */
|
|
queue_work(system_long_wq, &mhi_pdev->recovery_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops mhi_pci_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(mhi_pci_runtime_suspend, mhi_pci_runtime_resume, NULL)
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = mhi_pci_suspend,
|
|
.resume = mhi_pci_resume,
|
|
.freeze = mhi_pci_freeze,
|
|
.thaw = mhi_pci_restore,
|
|
.poweroff = mhi_pci_freeze,
|
|
.restore = mhi_pci_restore,
|
|
#endif
|
|
};
|
|
|
|
static struct pci_driver mhi_pci_driver = {
|
|
.name = "mhi-pci-generic",
|
|
.id_table = mhi_pci_id_table,
|
|
.probe = mhi_pci_probe,
|
|
.remove = mhi_pci_remove,
|
|
.shutdown = mhi_pci_shutdown,
|
|
.err_handler = &mhi_pci_err_handler,
|
|
.driver.pm = &mhi_pci_pm_ops
|
|
};
|
|
module_pci_driver(mhi_pci_driver);
|
|
|
|
MODULE_AUTHOR("Loic Poulain <loic.poulain@linaro.org>");
|
|
MODULE_DESCRIPTION("Modem Host Interface (MHI) PCI controller driver");
|
|
MODULE_LICENSE("GPL");
|