59 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			59 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
 | 
						|
--------------------------------------------------------------------
 | 
						|
 | 
						|
Required properties:
 | 
						|
 | 
						|
- compatible	  : "samsung,s5k5baf";
 | 
						|
- reg		  : I2C slave address of the sensor;
 | 
						|
- vdda-supply	  : analog power supply 2.8V (2.6V to 3.0V);
 | 
						|
- vddreg-supply	  : regulator input power supply 1.8V (1.7V to 1.9V)
 | 
						|
		    or 2.8V (2.6V to 3.0);
 | 
						|
- vddio-supply	  : I/O power supply 1.8V (1.65V to 1.95V)
 | 
						|
		    or 2.8V (2.5V to 3.1V);
 | 
						|
- stbyn-gpios	  : GPIO connected to STDBYN pin;
 | 
						|
- rstn-gpios	  : GPIO connected to RSTN pin;
 | 
						|
- clocks	  : list of phandle and clock specifier pairs
 | 
						|
		    according to common clock bindings for the
 | 
						|
		    clocks described in clock-names;
 | 
						|
- clock-names	  : should include "mclk" for the sensor's master clock;
 | 
						|
 | 
						|
Optional properties:
 | 
						|
 | 
						|
- clock-frequency : the frequency at which the "mclk" clock should be
 | 
						|
		    configured to operate, in Hz; if this property is not
 | 
						|
		    specified default 24 MHz value will be used.
 | 
						|
 | 
						|
The device node should contain one 'port' child node with one child 'endpoint'
 | 
						|
node, according to the bindings defined in Documentation/devicetree/bindings/
 | 
						|
media/video-interfaces.txt. The following are properties specific to those
 | 
						|
nodes.
 | 
						|
 | 
						|
endpoint node
 | 
						|
-------------
 | 
						|
 | 
						|
- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
 | 
						|
	       video-interfaces.txt. If present it should be <1> - the device
 | 
						|
	       supports only one data lane without re-mapping.
 | 
						|
 | 
						|
Example:
 | 
						|
 | 
						|
s5k5bafx@2d {
 | 
						|
	compatible = "samsung,s5k5baf";
 | 
						|
	reg = <0x2d>;
 | 
						|
	vdda-supply = <&cam_io_en_reg>;
 | 
						|
	vddreg-supply = <&vt_core_15v_reg>;
 | 
						|
	vddio-supply = <&vtcam_reg>;
 | 
						|
	stbyn-gpios = <&gpl2 0 1>;
 | 
						|
	rstn-gpios = <&gpl2 1 1>;
 | 
						|
	clock-names = "mclk";
 | 
						|
	clocks = <&clock_cam 0>;
 | 
						|
	clock-frequency = <24000000>;
 | 
						|
 | 
						|
	port {
 | 
						|
		s5k5bafx_ep: endpoint {
 | 
						|
			remote-endpoint = <&csis1_ep>;
 | 
						|
			data-lanes = <1>;
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 |