51 lines
1.4 KiB
Plaintext
51 lines
1.4 KiB
Plaintext
* smartsens,sc200ai MIPI sensor
|
||
|
||
Required Properties:
|
||
- compatible: should be "smartsens,sc200ai"
|
||
- clocks: reference to the 27M xvclk input clock.
|
||
- clock-names: should be "xvclk".
|
||
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
||
- avdd-supply: Analog voltage supply, 2.8 volts
|
||
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
||
- reset-gpios: High active reset gpio
|
||
|
||
Attention:
|
||
SC4238 device address 0x30(7bit)；
|
||
|
||
The device node must contain one 'port' child node for its digital output
|
||
video port, in accordance with the video interface bindings defined in
|
||
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
||
|
||
Example:
|
||
|
||
&i2c1 {
|
||
status = "okay";
|
||
sc200ai: sc200ai@30 {
|
||
compatible = "smartsens,sc200ai";
|
||
reg = <0x30>;
|
||
clocks = <&cru CLK_MIPICSI_OUT>;
|
||
clock-names = "xvclk";
|
||
power-domains = <&power RV1126_PD_VI>;
|
||
pinctrl-names = "rockchip,camera_default";
|
||
pinctrl-0 = <&mipicsi_clk0>;
|
||
avdd-supply = <&vcc_avdd>;
|
||
dovdd-supply = <&vcc_dovdd>;
|
||
dvdd-supply = <&vcc_dvdd>;
|
||
pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||
reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||
rockchip,camera-module-index = <1>;
|
||
rockchip,camera-module-facing = "front";
|
||
rockchip,camera-module-name = "C7234A-400";
|
||
rockchip,camera-module-lens-name = "30IRC-2MP-F20";
|
||
/* NO_HDR:0 HDR_X2:5 HDR_X3:6 */
|
||
rockchip,camera-hdr-mode = <5>;
|
||
|
||
port {
|
||
sc4238_out: endpoint {
|
||
remote-endpoint = <&mipi_in_ucam1>;
|
||
data-lanes = <1 2>;
|
||
};
|
||
};
|
||
};
|
||
};
|