44 lines
1.3 KiB
Plaintext
44 lines
1.3 KiB
Plaintext
* RK628 HDMI-RX to MIPI CSI2-TX Bridge
|
|
|
|
The RK628 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts
|
|
a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C.
|
|
|
|
Required Properties:
|
|
- compatible: value should be "rockchip,rk628-csi-v4l2"
|
|
- reg: I2C device address
|
|
|
|
Optional Properties:
|
|
- reset-gpios: gpio phandle GPIO connected to the reset pin
|
|
- enable-gpios: a GPIO spec for the enable pin
|
|
- plugin-det-gpios: HDMI 5V detect pin
|
|
- interrupts: GPIO connected to the interrupt pin
|
|
- data-lanes: should be <1 2 3 4> for four-lane operation,
|
|
or <1 2> for two-lane operation
|
|
|
|
For further information on the MIPI CSI-2 endpoint node properties, see
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
|
|
rk628_csi_v4l2: rk628_csi_v4l2@50 {
|
|
reg = <0x50>;
|
|
compatible = "rockchip,rk628-csi-v4l2";
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
enable-gpios = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
|
|
plugin-det-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "RK628-CSI";
|
|
rockchip,camera-module-lens-name = "NC";
|
|
|
|
port {
|
|
hdmiin_out0: endpoint {
|
|
remote-endpoint = <&mipi_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
};
|