49 lines
1.5 KiB
Plaintext
49 lines
1.5 KiB
Plaintext
* Ovti os05a20 MIPI sensor
|
|
|
|
Required Properties:
|
|
- compatible: should be "ovti,os05a20"
|
|
- clocks: reference to the 24M xvclk input clock.
|
|
- clock-names: should be "xvclk".
|
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
|
- reset-gpios: Low active reset gpio
|
|
|
|
Attention:
|
|
os05a20 device address 0x36(7bit) or 0x10(7bit) is decided by SID pin;
|
|
|
|
The device node must contain one 'port' child node for its digital output
|
|
video port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
//rv1126 evb13 board
|
|
&i2c1 {
|
|
status = "okay";
|
|
os05a20: os05a20@36 {
|
|
compatible = "ovti,os05a20";
|
|
reg = <0x36>;
|
|
clocks = <&cru CLK_MIPICSI_OUT>;
|
|
clock-names = "xvclk";
|
|
power-domains = <&power RV1126_PD_VI>;
|
|
pinctrl-names = "rockchip,camera_default";
|
|
pinctrl-0 = <&mipicsi_clk0>;
|
|
avdd-supply = <&vcc_avdd>;
|
|
dovdd-supply = <&vcc_dovdd>;
|
|
dvdd-supply = <&vcc_dvdd>;
|
|
power-gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pwdn-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
rockchip,camera-module-index = <1>;
|
|
rockchip,camera-module-facing = "front";
|
|
rockchip,camera-module-name = "JSD3425-C1";
|
|
rockchip,camera-module-lens-name = "JSD3425-C1-36IRC-4M-F20";
|
|
ir-cut = <&cam_ircut0>;
|
|
port {
|
|
ucam_out0: endpoint {
|
|
remote-endpoint = <&mipi_in_ucam0>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
};
|
|
};
|