549 lines
13 KiB
C
549 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver
|
|
*
|
|
* Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com>
|
|
*
|
|
* Datasheet: http://www.ti.com/lit/ds/symlink/adc12138.pdf
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/property.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#define ADC12138_MODE_AUTO_CAL 0x08
|
|
#define ADC12138_MODE_READ_STATUS 0x0c
|
|
#define ADC12138_MODE_ACQUISITION_TIME_6 0x0e
|
|
#define ADC12138_MODE_ACQUISITION_TIME_10 0x4e
|
|
#define ADC12138_MODE_ACQUISITION_TIME_18 0x8e
|
|
#define ADC12138_MODE_ACQUISITION_TIME_34 0xce
|
|
|
|
#define ADC12138_STATUS_CAL BIT(6)
|
|
|
|
enum {
|
|
adc12130,
|
|
adc12132,
|
|
adc12138,
|
|
};
|
|
|
|
struct adc12138 {
|
|
struct spi_device *spi;
|
|
unsigned int id;
|
|
/* conversion clock */
|
|
struct clk *cclk;
|
|
/* positive analog voltage reference */
|
|
struct regulator *vref_p;
|
|
/* negative analog voltage reference */
|
|
struct regulator *vref_n;
|
|
struct mutex lock;
|
|
struct completion complete;
|
|
/* The number of cclk periods for the S/H's acquisition time */
|
|
unsigned int acquisition_time;
|
|
/*
|
|
* Maximum size needed: 16x 2 bytes ADC data + 8 bytes timestamp.
|
|
* Less may be need if not all channels are enabled, as long as
|
|
* the 8 byte alignment of the timestamp is maintained.
|
|
*/
|
|
__be16 data[20] __aligned(8);
|
|
|
|
u8 tx_buf[2] __aligned(IIO_DMA_MINALIGN);
|
|
u8 rx_buf[2];
|
|
};
|
|
|
|
#define ADC12138_VOLTAGE_CHANNEL(chan) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = chan, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
|
|
| BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.scan_index = chan, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 13, \
|
|
.storagebits = 16, \
|
|
.shift = 3, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
#define ADC12138_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (chan1), \
|
|
.channel2 = (chan2), \
|
|
.differential = 1, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \
|
|
| BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.scan_index = si, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 13, \
|
|
.storagebits = 16, \
|
|
.shift = 3, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec adc12132_channels[] = {
|
|
ADC12138_VOLTAGE_CHANNEL(0),
|
|
ADC12138_VOLTAGE_CHANNEL(1),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 2),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 3),
|
|
IIO_CHAN_SOFT_TIMESTAMP(4),
|
|
};
|
|
|
|
static const struct iio_chan_spec adc12138_channels[] = {
|
|
ADC12138_VOLTAGE_CHANNEL(0),
|
|
ADC12138_VOLTAGE_CHANNEL(1),
|
|
ADC12138_VOLTAGE_CHANNEL(2),
|
|
ADC12138_VOLTAGE_CHANNEL(3),
|
|
ADC12138_VOLTAGE_CHANNEL(4),
|
|
ADC12138_VOLTAGE_CHANNEL(5),
|
|
ADC12138_VOLTAGE_CHANNEL(6),
|
|
ADC12138_VOLTAGE_CHANNEL(7),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 9),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(2, 3, 10),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(3, 2, 11),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(4, 5, 12),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(5, 4, 13),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(6, 7, 14),
|
|
ADC12138_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
|
|
IIO_CHAN_SOFT_TIMESTAMP(16),
|
|
};
|
|
|
|
static int adc12138_mode_programming(struct adc12138 *adc, u8 mode,
|
|
void *rx_buf, int len)
|
|
{
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = adc->tx_buf,
|
|
.rx_buf = adc->rx_buf,
|
|
.len = len,
|
|
};
|
|
int ret;
|
|
|
|
/* Skip unused bits for ADC12130 and ADC12132 */
|
|
if (adc->id != adc12138)
|
|
mode = (mode & 0xc0) | ((mode & 0x0f) << 2);
|
|
|
|
adc->tx_buf[0] = mode;
|
|
|
|
ret = spi_sync_transfer(adc->spi, &xfer, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memcpy(rx_buf, adc->rx_buf, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adc12138_read_status(struct adc12138 *adc)
|
|
{
|
|
u8 rx_buf[2];
|
|
int ret;
|
|
|
|
ret = adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS,
|
|
rx_buf, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return (rx_buf[0] << 1) | (rx_buf[1] >> 7);
|
|
}
|
|
|
|
static int __adc12138_start_conv(struct adc12138 *adc,
|
|
struct iio_chan_spec const *channel,
|
|
void *data, int len)
|
|
|
|
{
|
|
static const u8 ch_to_mux[] = { 0, 4, 1, 5, 2, 6, 3, 7 };
|
|
u8 mode = (ch_to_mux[channel->channel] << 4) |
|
|
(channel->differential ? 0 : 0x80);
|
|
|
|
return adc12138_mode_programming(adc, mode, data, len);
|
|
}
|
|
|
|
static int adc12138_start_conv(struct adc12138 *adc,
|
|
struct iio_chan_spec const *channel)
|
|
{
|
|
u8 trash;
|
|
|
|
return __adc12138_start_conv(adc, channel, &trash, 1);
|
|
}
|
|
|
|
static int adc12138_start_and_read_conv(struct adc12138 *adc,
|
|
struct iio_chan_spec const *channel,
|
|
__be16 *data)
|
|
{
|
|
return __adc12138_start_conv(adc, channel, data, 2);
|
|
}
|
|
|
|
static int adc12138_read_conv_data(struct adc12138 *adc, __be16 *value)
|
|
{
|
|
/* Issue a read status instruction and read previous conversion data */
|
|
return adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS,
|
|
value, sizeof(*value));
|
|
}
|
|
|
|
static int adc12138_wait_eoc(struct adc12138 *adc, unsigned long timeout)
|
|
{
|
|
if (!wait_for_completion_timeout(&adc->complete, timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adc12138_adc_conversion(struct adc12138 *adc,
|
|
struct iio_chan_spec const *channel,
|
|
__be16 *value)
|
|
{
|
|
int ret;
|
|
|
|
reinit_completion(&adc->complete);
|
|
|
|
ret = adc12138_start_conv(adc, channel);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return adc12138_read_conv_data(adc, value);
|
|
}
|
|
|
|
static int adc12138_read_raw(struct iio_dev *iio,
|
|
struct iio_chan_spec const *channel, int *value,
|
|
int *shift, long mask)
|
|
{
|
|
struct adc12138 *adc = iio_priv(iio);
|
|
int ret;
|
|
__be16 data;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&adc->lock);
|
|
ret = adc12138_adc_conversion(adc, channel, &data);
|
|
mutex_unlock(&adc->lock);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*value = sign_extend32(be16_to_cpu(data) >> channel->scan_type.shift,
|
|
channel->scan_type.realbits - 1);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = regulator_get_voltage(adc->vref_p);
|
|
if (ret < 0)
|
|
return ret;
|
|
*value = ret;
|
|
|
|
if (!IS_ERR(adc->vref_n)) {
|
|
ret = regulator_get_voltage(adc->vref_n);
|
|
if (ret < 0)
|
|
return ret;
|
|
*value -= ret;
|
|
}
|
|
|
|
/* convert regulator output voltage to mV */
|
|
*value /= 1000;
|
|
*shift = channel->scan_type.realbits - 1;
|
|
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
if (!IS_ERR(adc->vref_n)) {
|
|
*value = regulator_get_voltage(adc->vref_n);
|
|
if (*value < 0)
|
|
return *value;
|
|
} else {
|
|
*value = 0;
|
|
}
|
|
|
|
/* convert regulator output voltage to mV */
|
|
*value /= 1000;
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info adc12138_info = {
|
|
.read_raw = adc12138_read_raw,
|
|
};
|
|
|
|
static int adc12138_init(struct adc12138 *adc)
|
|
{
|
|
int ret;
|
|
int status;
|
|
u8 mode;
|
|
u8 trash;
|
|
|
|
reinit_completion(&adc->complete);
|
|
|
|
ret = adc12138_mode_programming(adc, ADC12138_MODE_AUTO_CAL, &trash, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* data output at this time has no significance */
|
|
status = adc12138_read_status(adc);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
adc12138_wait_eoc(adc, msecs_to_jiffies(100));
|
|
|
|
status = adc12138_read_status(adc);
|
|
if (status & ADC12138_STATUS_CAL) {
|
|
dev_warn(&adc->spi->dev,
|
|
"Auto Cal sequence is still in progress: %#x\n",
|
|
status);
|
|
return -EIO;
|
|
}
|
|
|
|
switch (adc->acquisition_time) {
|
|
case 6:
|
|
mode = ADC12138_MODE_ACQUISITION_TIME_6;
|
|
break;
|
|
case 10:
|
|
mode = ADC12138_MODE_ACQUISITION_TIME_10;
|
|
break;
|
|
case 18:
|
|
mode = ADC12138_MODE_ACQUISITION_TIME_18;
|
|
break;
|
|
case 34:
|
|
mode = ADC12138_MODE_ACQUISITION_TIME_34;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return adc12138_mode_programming(adc, mode, &trash, 1);
|
|
}
|
|
|
|
static irqreturn_t adc12138_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct adc12138 *adc = iio_priv(indio_dev);
|
|
__be16 trash;
|
|
int ret;
|
|
int scan_index;
|
|
int i = 0;
|
|
|
|
mutex_lock(&adc->lock);
|
|
|
|
for_each_set_bit(scan_index, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
const struct iio_chan_spec *scan_chan =
|
|
&indio_dev->channels[scan_index];
|
|
|
|
reinit_completion(&adc->complete);
|
|
|
|
ret = adc12138_start_and_read_conv(adc, scan_chan,
|
|
i ? &adc->data[i - 1] : &trash);
|
|
if (ret) {
|
|
dev_warn(&adc->spi->dev,
|
|
"failed to start conversion\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100));
|
|
if (ret) {
|
|
dev_warn(&adc->spi->dev, "wait eoc timeout\n");
|
|
goto out;
|
|
}
|
|
|
|
i++;
|
|
}
|
|
|
|
if (i) {
|
|
ret = adc12138_read_conv_data(adc, &adc->data[i - 1]);
|
|
if (ret) {
|
|
dev_warn(&adc->spi->dev,
|
|
"failed to get conversion data\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, adc->data,
|
|
iio_get_time_ns(indio_dev));
|
|
out:
|
|
mutex_unlock(&adc->lock);
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t adc12138_eoc_handler(int irq, void *p)
|
|
{
|
|
struct iio_dev *indio_dev = p;
|
|
struct adc12138 *adc = iio_priv(indio_dev);
|
|
|
|
complete(&adc->complete);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int adc12138_probe(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct adc12138 *adc;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
adc = iio_priv(indio_dev);
|
|
adc->spi = spi;
|
|
adc->id = spi_get_device_id(spi)->driver_data;
|
|
mutex_init(&adc->lock);
|
|
init_completion(&adc->complete);
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->info = &adc12138_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
switch (adc->id) {
|
|
case adc12130:
|
|
case adc12132:
|
|
indio_dev->channels = adc12132_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adc12132_channels);
|
|
break;
|
|
case adc12138:
|
|
indio_dev->channels = adc12138_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adc12138_channels);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = device_property_read_u32(&spi->dev, "ti,acquisition-time",
|
|
&adc->acquisition_time);
|
|
if (ret)
|
|
adc->acquisition_time = 10;
|
|
|
|
adc->cclk = devm_clk_get(&spi->dev, NULL);
|
|
if (IS_ERR(adc->cclk))
|
|
return PTR_ERR(adc->cclk);
|
|
|
|
adc->vref_p = devm_regulator_get(&spi->dev, "vref-p");
|
|
if (IS_ERR(adc->vref_p))
|
|
return PTR_ERR(adc->vref_p);
|
|
|
|
adc->vref_n = devm_regulator_get_optional(&spi->dev, "vref-n");
|
|
if (IS_ERR(adc->vref_n)) {
|
|
/*
|
|
* Assume vref_n is 0V if an optional regulator is not
|
|
* specified, otherwise return the error code.
|
|
*/
|
|
ret = PTR_ERR(adc->vref_n);
|
|
if (ret != -ENODEV)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(&spi->dev, spi->irq, adc12138_eoc_handler,
|
|
IRQF_TRIGGER_RISING, indio_dev->name, indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(adc->cclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_enable(adc->vref_p);
|
|
if (ret)
|
|
goto err_clk_disable;
|
|
|
|
if (!IS_ERR(adc->vref_n)) {
|
|
ret = regulator_enable(adc->vref_n);
|
|
if (ret)
|
|
goto err_vref_p_disable;
|
|
}
|
|
|
|
ret = adc12138_init(adc);
|
|
if (ret)
|
|
goto err_vref_n_disable;
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
adc12138_trigger_handler, NULL);
|
|
if (ret)
|
|
goto err_vref_n_disable;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto err_buffer_cleanup;
|
|
|
|
return 0;
|
|
err_buffer_cleanup:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
err_vref_n_disable:
|
|
if (!IS_ERR(adc->vref_n))
|
|
regulator_disable(adc->vref_n);
|
|
err_vref_p_disable:
|
|
regulator_disable(adc->vref_p);
|
|
err_clk_disable:
|
|
clk_disable_unprepare(adc->cclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void adc12138_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct adc12138 *adc = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
if (!IS_ERR(adc->vref_n))
|
|
regulator_disable(adc->vref_n);
|
|
regulator_disable(adc->vref_p);
|
|
clk_disable_unprepare(adc->cclk);
|
|
}
|
|
|
|
static const struct of_device_id adc12138_dt_ids[] = {
|
|
{ .compatible = "ti,adc12130", },
|
|
{ .compatible = "ti,adc12132", },
|
|
{ .compatible = "ti,adc12138", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adc12138_dt_ids);
|
|
|
|
static const struct spi_device_id adc12138_id[] = {
|
|
{ "adc12130", adc12130 },
|
|
{ "adc12132", adc12132 },
|
|
{ "adc12138", adc12138 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, adc12138_id);
|
|
|
|
static struct spi_driver adc12138_driver = {
|
|
.driver = {
|
|
.name = "adc12138",
|
|
.of_match_table = adc12138_dt_ids,
|
|
},
|
|
.probe = adc12138_probe,
|
|
.remove = adc12138_remove,
|
|
.id_table = adc12138_id,
|
|
};
|
|
module_spi_driver(adc12138_driver);
|
|
|
|
MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>");
|
|
MODULE_DESCRIPTION("ADC12130/ADC12132/ADC12138 driver");
|
|
MODULE_LICENSE("GPL v2");
|