316 lines
		
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			316 lines
		
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * AD7766/AD7767 SPI ADC driver
 | |
|  *
 | |
|  * Copyright 2016 Analog Devices Inc.
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/spi/spi.h>
 | |
| 
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/buffer.h>
 | |
| #include <linux/iio/trigger.h>
 | |
| #include <linux/iio/trigger_consumer.h>
 | |
| #include <linux/iio/triggered_buffer.h>
 | |
| 
 | |
| struct ad7766_chip_info {
 | |
| 	unsigned int decimation_factor;
 | |
| };
 | |
| 
 | |
| enum {
 | |
| 	AD7766_SUPPLY_AVDD = 0,
 | |
| 	AD7766_SUPPLY_DVDD = 1,
 | |
| 	AD7766_SUPPLY_VREF = 2,
 | |
| 	AD7766_NUM_SUPPLIES = 3
 | |
| };
 | |
| 
 | |
| struct ad7766 {
 | |
| 	const struct ad7766_chip_info *chip_info;
 | |
| 	struct spi_device *spi;
 | |
| 	struct clk *mclk;
 | |
| 	struct gpio_desc *pd_gpio;
 | |
| 	struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES];
 | |
| 
 | |
| 	struct iio_trigger *trig;
 | |
| 
 | |
| 	struct spi_transfer xfer;
 | |
| 	struct spi_message msg;
 | |
| 
 | |
| 	/*
 | |
| 	 * DMA (thus cache coherency maintenance) may require the
 | |
| 	 * transfer buffers to live in their own cache lines.
 | |
| 	 * Make the buffer large enough for one 24 bit sample and one 64 bit
 | |
| 	 * aligned 64 bit timestamp.
 | |
| 	 */
 | |
| 	unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)]	__aligned(IIO_DMA_MINALIGN);
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * AD7766 and AD7767 variations are interface compatible, the main difference is
 | |
|  * analog performance. Both parts will use the same ID.
 | |
|  */
 | |
| enum ad7766_device_ids {
 | |
| 	ID_AD7766,
 | |
| 	ID_AD7766_1,
 | |
| 	ID_AD7766_2,
 | |
| };
 | |
| 
 | |
| static irqreturn_t ad7766_trigger_handler(int irq, void *p)
 | |
| {
 | |
| 	struct iio_poll_func *pf = p;
 | |
| 	struct iio_dev *indio_dev = pf->indio_dev;
 | |
| 	struct ad7766 *ad7766 = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = spi_sync(ad7766->spi, &ad7766->msg);
 | |
| 	if (ret < 0)
 | |
| 		goto done;
 | |
| 
 | |
| 	iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
 | |
| 		pf->timestamp);
 | |
| done:
 | |
| 	iio_trigger_notify_done(indio_dev->trig);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int ad7766_preenable(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct ad7766 *ad7766 = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = clk_prepare_enable(ad7766->mclk);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret);
 | |
| 		regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	gpiod_set_value(ad7766->pd_gpio, 0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ad7766_postdisable(struct iio_dev *indio_dev)
 | |
| {
 | |
| 	struct ad7766 *ad7766 = iio_priv(indio_dev);
 | |
| 
 | |
| 	gpiod_set_value(ad7766->pd_gpio, 1);
 | |
| 
 | |
| 	/*
 | |
| 	 * The PD pin is synchronous to the clock, so give it some time to
 | |
| 	 * notice the change before we disable the clock.
 | |
| 	 */
 | |
| 	msleep(20);
 | |
| 
 | |
| 	clk_disable_unprepare(ad7766->mclk);
 | |
| 	regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ad7766_read_raw(struct iio_dev *indio_dev,
 | |
| 	const struct iio_chan_spec *chan, int *val, int *val2, long info)
 | |
| {
 | |
| 	struct ad7766 *ad7766 = iio_priv(indio_dev);
 | |
| 	struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
 | |
| 	int scale_uv;
 | |
| 
 | |
| 	switch (info) {
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		scale_uv = regulator_get_voltage(vref);
 | |
| 		if (scale_uv < 0)
 | |
| 			return scale_uv;
 | |
| 		*val = scale_uv / 1000;
 | |
| 		*val2 = chan->scan_type.realbits;
 | |
| 		return IIO_VAL_FRACTIONAL_LOG2;
 | |
| 	case IIO_CHAN_INFO_SAMP_FREQ:
 | |
| 		*val = clk_get_rate(ad7766->mclk) /
 | |
| 			ad7766->chip_info->decimation_factor;
 | |
| 		return IIO_VAL_INT;
 | |
| 	}
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static const struct iio_chan_spec ad7766_channels[] = {
 | |
| 	{
 | |
| 		.type = IIO_VOLTAGE,
 | |
| 		.indexed = 1,
 | |
| 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
 | |
| 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 | |
| 		.scan_type = {
 | |
| 			.sign = 's',
 | |
| 			.realbits = 24,
 | |
| 			.storagebits = 32,
 | |
| 			.endianness = IIO_BE,
 | |
| 		},
 | |
| 	},
 | |
| 	IIO_CHAN_SOFT_TIMESTAMP(1),
 | |
| };
 | |
| 
 | |
| static const struct ad7766_chip_info ad7766_chip_info[] = {
 | |
| 	[ID_AD7766] = {
 | |
| 		.decimation_factor = 8,
 | |
| 	},
 | |
| 	[ID_AD7766_1] = {
 | |
| 		.decimation_factor = 16,
 | |
| 	},
 | |
| 	[ID_AD7766_2] = {
 | |
| 		.decimation_factor = 32,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
 | |
| 	.preenable = &ad7766_preenable,
 | |
| 	.postdisable = &ad7766_postdisable,
 | |
| };
 | |
| 
 | |
| static const struct iio_info ad7766_info = {
 | |
| 	.read_raw = &ad7766_read_raw,
 | |
| };
 | |
| 
 | |
| static irqreturn_t ad7766_irq(int irq, void *private)
 | |
| {
 | |
| 	iio_trigger_poll(private);
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable)
 | |
| {
 | |
| 	struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig);
 | |
| 
 | |
| 	if (enable)
 | |
| 		enable_irq(ad7766->spi->irq);
 | |
| 	else
 | |
| 		disable_irq(ad7766->spi->irq);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct iio_trigger_ops ad7766_trigger_ops = {
 | |
| 	.set_trigger_state = ad7766_set_trigger_state,
 | |
| 	.validate_device = iio_trigger_validate_own_device,
 | |
| };
 | |
| 
 | |
| static int ad7766_probe(struct spi_device *spi)
 | |
| {
 | |
| 	const struct spi_device_id *id = spi_get_device_id(spi);
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	struct ad7766 *ad7766;
 | |
| 	int ret;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	ad7766 = iio_priv(indio_dev);
 | |
| 	ad7766->chip_info = &ad7766_chip_info[id->driver_data];
 | |
| 
 | |
| 	ad7766->mclk = devm_clk_get(&spi->dev, "mclk");
 | |
| 	if (IS_ERR(ad7766->mclk))
 | |
| 		return PTR_ERR(ad7766->mclk);
 | |
| 
 | |
| 	ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd";
 | |
| 	ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd";
 | |
| 	ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
 | |
| 
 | |
| 	ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
 | |
| 		ad7766->reg);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
 | |
| 		GPIOD_OUT_HIGH);
 | |
| 	if (IS_ERR(ad7766->pd_gpio))
 | |
| 		return PTR_ERR(ad7766->pd_gpio);
 | |
| 
 | |
| 	indio_dev->name = spi_get_device_id(spi)->name;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 	indio_dev->channels = ad7766_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(ad7766_channels);
 | |
| 	indio_dev->info = &ad7766_info;
 | |
| 
 | |
| 	if (spi->irq > 0) {
 | |
| 		ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
 | |
| 						      indio_dev->name,
 | |
| 						      iio_device_id(indio_dev));
 | |
| 		if (!ad7766->trig)
 | |
| 			return -ENOMEM;
 | |
| 
 | |
| 		ad7766->trig->ops = &ad7766_trigger_ops;
 | |
| 		iio_trigger_set_drvdata(ad7766->trig, ad7766);
 | |
| 
 | |
| 		/*
 | |
| 		 * The device generates interrupts as long as it is powered up.
 | |
| 		 * Some platforms might not allow the option to power it down so
 | |
| 		 * don't enable the interrupt to avoid extra load on the system
 | |
| 		 */
 | |
| 		ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
 | |
| 				       IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN,
 | |
| 				       dev_name(&spi->dev),
 | |
| 				       ad7766->trig);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	ad7766->spi = spi;
 | |
| 
 | |
| 	/* First byte always 0 */
 | |
| 	ad7766->xfer.rx_buf = &ad7766->data[1];
 | |
| 	ad7766->xfer.len = 3;
 | |
| 
 | |
| 	spi_message_init(&ad7766->msg);
 | |
| 	spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
 | |
| 
 | |
| 	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
 | |
| 		&iio_pollfunc_store_time, &ad7766_trigger_handler,
 | |
| 		&ad7766_buffer_setup_ops);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return devm_iio_device_register(&spi->dev, indio_dev);
 | |
| }
 | |
| 
 | |
| static const struct spi_device_id ad7766_id[] = {
 | |
| 	{"ad7766", ID_AD7766},
 | |
| 	{"ad7766-1", ID_AD7766_1},
 | |
| 	{"ad7766-2", ID_AD7766_2},
 | |
| 	{"ad7767", ID_AD7766},
 | |
| 	{"ad7767-1", ID_AD7766_1},
 | |
| 	{"ad7767-2", ID_AD7766_2},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(spi, ad7766_id);
 | |
| 
 | |
| static struct spi_driver ad7766_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "ad7766",
 | |
| 	},
 | |
| 	.probe		= ad7766_probe,
 | |
| 	.id_table	= ad7766_id,
 | |
| };
 | |
| module_spi_driver(ad7766_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
 | |
| MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support");
 | |
| MODULE_LICENSE("GPL v2");
 |