57 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			57 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
What:		/sys/.../events/in_illuminance0_thresh_either_en
 | 
						|
Date:		April 2012
 | 
						|
KernelVersion:	3.5
 | 
						|
Contact:	Johan Hovold <jhovold@gmail.com>
 | 
						|
Description:
 | 
						|
		Event generated when channel passes one of the four thresholds
 | 
						|
		in each direction (rising|falling) and a zone change occurs.
 | 
						|
		The corresponding light zone can be read from
 | 
						|
		in_illuminance0_zone.
 | 
						|
 | 
						|
What:		/sys/.../events/in_illuminance0_threshY_hysteresis
 | 
						|
Date:		May 2012
 | 
						|
KernelVersion:	3.5
 | 
						|
Contact:	Johan Hovold <jhovold@gmail.com>
 | 
						|
Description:
 | 
						|
		Get the hysteresis for thresholds Y, that is,
 | 
						|
		threshY_hysteresis = threshY_raising - threshY_falling
 | 
						|
 | 
						|
What:		/sys/.../events/illuminance_threshY_falling_value
 | 
						|
What:		/sys/.../events/illuminance_threshY_raising_value
 | 
						|
Date:		April 2012
 | 
						|
KernelVersion:	3.5
 | 
						|
Contact:	Johan Hovold <jhovold@gmail.com>
 | 
						|
Description:
 | 
						|
		Specifies the value of threshold that the device is comparing
 | 
						|
		against for the events enabled by
 | 
						|
		in_illuminance0_thresh_either_en (0..255), where Y in 0..3.
 | 
						|
 | 
						|
		Note that threshY_falling must be less than or equal to
 | 
						|
		threshY_raising.
 | 
						|
 | 
						|
		These thresholds correspond to the eight zone-boundary
 | 
						|
		registers (boundaryY_{low,high}) and define the five light
 | 
						|
		zones.
 | 
						|
 | 
						|
What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone
 | 
						|
Date:		April 2012
 | 
						|
KernelVersion:	3.5
 | 
						|
Contact:	Johan Hovold <jhovold@gmail.com>
 | 
						|
Description:
 | 
						|
		Get the current light zone (0..4) as defined by the
 | 
						|
		in_illuminance0_threshY_{falling,rising} thresholds.
 | 
						|
 | 
						|
What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw
 | 
						|
Date:		May 2012
 | 
						|
KernelVersion:	3.5
 | 
						|
Contact:	Johan Hovold <jhovold@gmail.com>
 | 
						|
Description:
 | 
						|
		Set the output current for channel out_currentY when in zone
 | 
						|
		Z (0..255), where Y in 0..2 and Z in 0..4.
 | 
						|
 | 
						|
		These values correspond to the ALS-mapper target registers for
 | 
						|
		ALS-mapper Y + 1.
 | 
						|
 | 
						|
		Note that out_currentY_raw provides the current for the
 | 
						|
		current zone.
 |