nathan/CoolPi-Armbian-Rockchip-RK3588-Upstream-Linux-6.1-LTS-Kernel
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
CoolPi-Armbian-Rockchip-RK3.../drivers/tty/serial/sprd_serial.c

1298 lines
30 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012-2015 Spreadtrum Communications Inc.
*/
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/dma/sprd-dma.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
/* device name */
#define UART_NR_MAX 8
#define SPRD_TTY_NAME "ttyS"
#define SPRD_FIFO_SIZE 128
#define SPRD_DEF_RATE 26000000
#define SPRD_BAUD_IO_LIMIT 3000000
#define SPRD_TIMEOUT 256000
/* the offset of serial registers and BITs for them */
/* data registers */
#define SPRD_TXD 0x0000
#define SPRD_RXD 0x0004
/* line status register and its BITs */
#define SPRD_LSR 0x0008
#define SPRD_LSR_OE BIT(4)
#define SPRD_LSR_FE BIT(3)
#define SPRD_LSR_PE BIT(2)
#define SPRD_LSR_BI BIT(7)
#define SPRD_LSR_TX_OVER BIT(15)
/* data number in TX and RX fifo */
#define SPRD_STS1 0x000C
#define SPRD_RX_FIFO_CNT_MASK GENMASK(7, 0)
#define SPRD_TX_FIFO_CNT_MASK GENMASK(15, 8)
/* interrupt enable register and its BITs */
#define SPRD_IEN 0x0010
#define SPRD_IEN_RX_FULL BIT(0)
#define SPRD_IEN_TX_EMPTY BIT(1)
#define SPRD_IEN_BREAK_DETECT BIT(7)
#define SPRD_IEN_TIMEOUT BIT(13)
/* interrupt clear register */
#define SPRD_ICLR 0x0014
#define SPRD_ICLR_TIMEOUT BIT(13)
/* line control register */
#define SPRD_LCR 0x0018
#define SPRD_LCR_STOP_1BIT 0x10
#define SPRD_LCR_STOP_2BIT 0x30
#define SPRD_LCR_DATA_LEN (BIT(2) | BIT(3))
#define SPRD_LCR_DATA_LEN5 0x0
#define SPRD_LCR_DATA_LEN6 0x4
#define SPRD_LCR_DATA_LEN7 0x8
#define SPRD_LCR_DATA_LEN8 0xc
#define SPRD_LCR_PARITY (BIT(0) | BIT(1))
#define SPRD_LCR_PARITY_EN 0x2
#define SPRD_LCR_EVEN_PAR 0x0
#define SPRD_LCR_ODD_PAR 0x1
/* control register 1 */
#define SPRD_CTL1 0x001C
#define SPRD_DMA_EN BIT(15)
#define SPRD_LOOPBACK_EN BIT(14)
#define RX_HW_FLOW_CTL_THLD BIT(6)
#define RX_HW_FLOW_CTL_EN BIT(7)
#define TX_HW_FLOW_CTL_EN BIT(8)
#define RX_TOUT_THLD_DEF 0x3E00
#define RX_HFC_THLD_DEF 0x40
/* fifo threshold register */
#define SPRD_CTL2 0x0020
#define THLD_TX_EMPTY 0x40
#define THLD_TX_EMPTY_SHIFT 8
#define THLD_RX_FULL 0x40
#define THLD_RX_FULL_MASK GENMASK(6, 0)
/* config baud rate register */
#define SPRD_CLKD0 0x0024
#define SPRD_CLKD0_MASK GENMASK(15, 0)
#define SPRD_CLKD1 0x0028
#define SPRD_CLKD1_MASK GENMASK(20, 16)
#define SPRD_CLKD1_SHIFT 16
/* interrupt mask status register */
#define SPRD_IMSR 0x002C
#define SPRD_IMSR_RX_FIFO_FULL BIT(0)
#define SPRD_IMSR_TX_FIFO_EMPTY BIT(1)
#define SPRD_IMSR_BREAK_DETECT BIT(7)
#define SPRD_IMSR_TIMEOUT BIT(13)
#define SPRD_DEFAULT_SOURCE_CLK 26000000
#define SPRD_RX_DMA_STEP 1
#define SPRD_RX_FIFO_FULL 1
#define SPRD_TX_FIFO_FULL 0x20
#define SPRD_UART_RX_SIZE (UART_XMIT_SIZE / 4)
struct sprd_uart_dma {
struct dma_chan *chn;
unsigned char *virt;
dma_addr_t phys_addr;
dma_cookie_t cookie;
u32 trans_len;
bool enable;
};
struct sprd_uart_port {
struct uart_port port;
char name[16];
struct clk *clk;
struct sprd_uart_dma tx_dma;
struct sprd_uart_dma rx_dma;
dma_addr_t pos;
unsigned char *rx_buf_tail;
};
static struct sprd_uart_port *sprd_port[UART_NR_MAX];
static int sprd_ports_num;
static int sprd_start_dma_rx(struct uart_port *port);
static int sprd_tx_dma_config(struct uart_port *port);
static inline unsigned int serial_in(struct uart_port *port,
unsigned int offset)
{
return readl_relaxed(port->membase + offset);
}
static inline void serial_out(struct uart_port *port, unsigned int offset,
int value)
{
writel_relaxed(value, port->membase + offset);
}
static unsigned int sprd_tx_empty(struct uart_port *port)
{
if (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
return 0;
else
return TIOCSER_TEMT;
}
static unsigned int sprd_get_mctrl(struct uart_port *port)
{
return TIOCM_DSR | TIOCM_CTS;
}
static void sprd_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
u32 val = serial_in(port, SPRD_CTL1);
if (mctrl & TIOCM_LOOP)
val |= SPRD_LOOPBACK_EN;
else
val &= ~SPRD_LOOPBACK_EN;
serial_out(port, SPRD_CTL1, val);
}
static void sprd_stop_rx(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
unsigned int ien, iclr;
if (sp->rx_dma.enable)
dmaengine_terminate_all(sp->rx_dma.chn);
iclr = serial_in(port, SPRD_ICLR);
ien = serial_in(port, SPRD_IEN);
ien &= ~(SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT);
iclr |= SPRD_IEN_RX_FULL | SPRD_IEN_BREAK_DETECT;
serial_out(port, SPRD_IEN, ien);
serial_out(port, SPRD_ICLR, iclr);
}
static void sprd_uart_dma_enable(struct uart_port *port, bool enable)
{
u32 val = serial_in(port, SPRD_CTL1);
if (enable)
val |= SPRD_DMA_EN;
else
val &= ~SPRD_DMA_EN;
serial_out(port, SPRD_CTL1, val);
}
static void sprd_stop_tx_dma(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct circ_buf *xmit = &port->state->xmit;
struct dma_tx_state state;
u32 trans_len;
dmaengine_pause(sp->tx_dma.chn);
dmaengine_tx_status(sp->tx_dma.chn, sp->tx_dma.cookie, &state);
if (state.residue) {
trans_len = state.residue - sp->tx_dma.phys_addr;
xmit->tail = (xmit->tail + trans_len) & (UART_XMIT_SIZE - 1);
port->icount.tx += trans_len;
dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
sp->tx_dma.trans_len, DMA_TO_DEVICE);
}
dmaengine_terminate_all(sp->tx_dma.chn);
sp->tx_dma.trans_len = 0;
}
static int sprd_tx_buf_remap(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct circ_buf *xmit = &port->state->xmit;
sp->tx_dma.trans_len =
CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
sp->tx_dma.phys_addr = dma_map_single(port->dev,
(void *)&(xmit->buf[xmit->tail]),
sp->tx_dma.trans_len,
DMA_TO_DEVICE);
return dma_mapping_error(port->dev, sp->tx_dma.phys_addr);
}
static void sprd_complete_tx_dma(void *data)
{
struct uart_port *port = (struct uart_port *)data;
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct circ_buf *xmit = &port->state->xmit;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
dma_unmap_single(port->dev, sp->tx_dma.phys_addr,
sp->tx_dma.trans_len, DMA_TO_DEVICE);
xmit->tail = (xmit->tail + sp->tx_dma.trans_len) & (UART_XMIT_SIZE - 1);
port->icount.tx += sp->tx_dma.trans_len;
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit) || sprd_tx_buf_remap(port) ||
sprd_tx_dma_config(port))
sp->tx_dma.trans_len = 0;
spin_unlock_irqrestore(&port->lock, flags);
}
static int sprd_uart_dma_submit(struct uart_port *port,
struct sprd_uart_dma *ud, u32 trans_len,
enum dma_transfer_direction direction,
dma_async_tx_callback callback)
{
struct dma_async_tx_descriptor *dma_des;
unsigned long flags;
flags = SPRD_DMA_FLAGS(SPRD_DMA_CHN_MODE_NONE,
SPRD_DMA_NO_TRG,
SPRD_DMA_FRAG_REQ,
SPRD_DMA_TRANS_INT);
dma_des = dmaengine_prep_slave_single(ud->chn, ud->phys_addr, trans_len,
direction, flags);
if (!dma_des)
return -ENODEV;
dma_des->callback = callback;
dma_des->callback_param = port;
ud->cookie = dmaengine_submit(dma_des);
if (dma_submit_error(ud->cookie))
return dma_submit_error(ud->cookie);
dma_async_issue_pending(ud->chn);
return 0;
}
static int sprd_tx_dma_config(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
u32 burst = sp->tx_dma.trans_len > SPRD_TX_FIFO_FULL ?
SPRD_TX_FIFO_FULL : sp->tx_dma.trans_len;
int ret;
struct dma_slave_config cfg = {
.dst_addr = port->mapbase + SPRD_TXD,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.src_maxburst = burst,
};
ret = dmaengine_slave_config(sp->tx_dma.chn, &cfg);
if (ret < 0)
return ret;
return sprd_uart_dma_submit(port, &sp->tx_dma, sp->tx_dma.trans_len,
DMA_MEM_TO_DEV, sprd_complete_tx_dma);
}
static void sprd_start_tx_dma(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct circ_buf *xmit = &port->state->xmit;
if (port->x_char) {
serial_out(port, SPRD_TXD, port->x_char);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
sprd_stop_tx_dma(port);
return;
}
if (sp->tx_dma.trans_len)
return;
if (sprd_tx_buf_remap(port) || sprd_tx_dma_config(port))
sp->tx_dma.trans_len = 0;
}
static void sprd_rx_full_thld(struct uart_port *port, u32 thld)
{
u32 val = serial_in(port, SPRD_CTL2);
val &= ~THLD_RX_FULL_MASK;
val |= thld & THLD_RX_FULL_MASK;
serial_out(port, SPRD_CTL2, val);
}
static int sprd_rx_alloc_buf(struct sprd_uart_port *sp)
{
sp->rx_dma.virt = dma_alloc_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
&sp->rx_dma.phys_addr, GFP_KERNEL);
if (!sp->rx_dma.virt)
return -ENOMEM;
return 0;
}
static void sprd_rx_free_buf(struct sprd_uart_port *sp)
{
if (sp->rx_dma.virt)
dma_free_coherent(sp->port.dev, SPRD_UART_RX_SIZE,
sp->rx_dma.virt, sp->rx_dma.phys_addr);
sp->rx_dma.virt = NULL;
}
static int sprd_rx_dma_config(struct uart_port *port, u32 burst)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct dma_slave_config cfg = {
.src_addr = port->mapbase + SPRD_RXD,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.src_maxburst = burst,
};
return dmaengine_slave_config(sp->rx_dma.chn, &cfg);
}
static void sprd_uart_dma_rx(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct tty_port *tty = &port->state->port;
port->icount.rx += sp->rx_dma.trans_len;
tty_insert_flip_string(tty, sp->rx_buf_tail, sp->rx_dma.trans_len);
tty_flip_buffer_push(tty);
}
static void sprd_uart_dma_irq(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct dma_tx_state state;
enum dma_status status;
status = dmaengine_tx_status(sp->rx_dma.chn,
sp->rx_dma.cookie, &state);
if (status == DMA_ERROR)
sprd_stop_rx(port);
if (!state.residue && sp->pos == sp->rx_dma.phys_addr)
return;
if (!state.residue) {
sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
sp->rx_dma.phys_addr - sp->pos;
sp->pos = sp->rx_dma.phys_addr;
} else {
sp->rx_dma.trans_len = state.residue - sp->pos;
sp->pos = state.residue;
}
sprd_uart_dma_rx(port);
sp->rx_buf_tail += sp->rx_dma.trans_len;
}
static void sprd_complete_rx_dma(void *data)
{
struct uart_port *port = (struct uart_port *)data;
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
struct dma_tx_state state;
enum dma_status status;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
status = dmaengine_tx_status(sp->rx_dma.chn,
sp->rx_dma.cookie, &state);
if (status != DMA_COMPLETE) {
sprd_stop_rx(port);
spin_unlock_irqrestore(&port->lock, flags);
return;
}
if (sp->pos != sp->rx_dma.phys_addr) {
sp->rx_dma.trans_len = SPRD_UART_RX_SIZE +
sp->rx_dma.phys_addr - sp->pos;
sprd_uart_dma_rx(port);
sp->rx_buf_tail += sp->rx_dma.trans_len;
}
if (sprd_start_dma_rx(port))
sprd_stop_rx(port);
spin_unlock_irqrestore(&port->lock, flags);
}
static int sprd_start_dma_rx(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
int ret;
if (!sp->rx_dma.enable)
return 0;
sp->pos = sp->rx_dma.phys_addr;
sp->rx_buf_tail = sp->rx_dma.virt;
sprd_rx_full_thld(port, SPRD_RX_FIFO_FULL);
ret = sprd_rx_dma_config(port, SPRD_RX_DMA_STEP);
if (ret)
return ret;
return sprd_uart_dma_submit(port, &sp->rx_dma, SPRD_UART_RX_SIZE,
DMA_DEV_TO_MEM, sprd_complete_rx_dma);
}
static void sprd_release_dma(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
sprd_uart_dma_enable(port, false);
if (sp->rx_dma.enable)
dma_release_channel(sp->rx_dma.chn);
if (sp->tx_dma.enable)
dma_release_channel(sp->tx_dma.chn);
sp->tx_dma.enable = false;
sp->rx_dma.enable = false;
}
static void sprd_request_dma(struct uart_port *port)
{
struct sprd_uart_port *sp =
container_of(port, struct sprd_uart_port, port);
sp->tx_dma.enable = true;
sp->rx_dma.enable = true;
sp->tx_dma.chn = dma_request_chan(port->dev, "tx");
if (IS_ERR(sp->tx_dma.chn)) {
dev_err(port->dev, "request TX DMA channel failed, ret = %ld\n",
PTR_ERR(sp->tx_dma.chn));
sp->tx_dma.enable = false;
}
sp->rx_dma.chn = dma_request_chan(port->dev, "rx");
if (IS_ERR(sp->rx_dma.chn)) {
dev_err(port->dev, "request RX DMA channel failed, ret = %ld\n",
PTR_ERR(sp->rx_dma.chn));
sp->rx_dma.enable = false;
}
}
static void sprd_stop_tx(struct uart_port *port)
{
struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
port);
unsigned int ien, iclr;
if (sp->tx_dma.enable) {
sprd_stop_tx_dma(port);
return;
}
iclr = serial_in(port, SPRD_ICLR);
ien = serial_in(port, SPRD_IEN);
iclr |= SPRD_IEN_TX_EMPTY;
ien &= ~SPRD_IEN_TX_EMPTY;
serial_out(port, SPRD_IEN, ien);
serial_out(port, SPRD_ICLR, iclr);
}
static void sprd_start_tx(struct uart_port *port)
{
struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
port);
unsigned int ien;
if (sp->tx_dma.enable) {
sprd_start_tx_dma(port);
return;
}
ien = serial_in(port, SPRD_IEN);
if (!(ien & SPRD_IEN_TX_EMPTY)) {
ien |= SPRD_IEN_TX_EMPTY;
serial_out(port, SPRD_IEN, ien);
}
}
/* The Sprd serial does not support this function. */
static void sprd_break_ctl(struct uart_port *port, int break_state)
{
/* nothing to do */
}
static int handle_lsr_errors(struct uart_port *port,
unsigned int *flag,
unsigned int *lsr)
{
int ret = 0;
/* statistics */
if (*lsr & SPRD_LSR_BI) {
*lsr &= ~(SPRD_LSR_FE | SPRD_LSR_PE);
port->icount.brk++;
ret = uart_handle_break(port);
if (ret)
return ret;
} else if (*lsr & SPRD_LSR_PE)
port->icount.parity++;
else if (*lsr & SPRD_LSR_FE)
port->icount.frame++;
if (*lsr & SPRD_LSR_OE)
port->icount.overrun++;
/* mask off conditions which should be ignored */
*lsr &= port->read_status_mask;
if (*lsr & SPRD_LSR_BI)
*flag = TTY_BREAK;
else if (*lsr & SPRD_LSR_PE)
*flag = TTY_PARITY;
else if (*lsr & SPRD_LSR_FE)
*flag = TTY_FRAME;
return ret;
}
static inline void sprd_rx(struct uart_port *port)
{
struct sprd_uart_port *sp = container_of(port, struct sprd_uart_port,
port);
struct tty_port *tty = &port->state->port;
unsigned int ch, flag, lsr, max_count = SPRD_TIMEOUT;
if (sp->rx_dma.enable) {
sprd_uart_dma_irq(port);
return;
}
while ((serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK) &&
max_count--) {
lsr = serial_in(port, SPRD_LSR);
ch = serial_in(port, SPRD_RXD);
flag = TTY_NORMAL;
port->icount.rx++;
if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
SPRD_LSR_FE | SPRD_LSR_OE))
if (handle_lsr_errors(port, &flag, &lsr))
continue;
if (uart_handle_sysrq_char(port, ch))
continue;
uart_insert_char(port, lsr, SPRD_LSR_OE, ch, flag);
}
tty_flip_buffer_push(tty);
}
static inline void sprd_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
int count;
if (port->x_char) {
serial_out(port, SPRD_TXD, port->x_char);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
sprd_stop_tx(port);
return;
}
count = THLD_TX_EMPTY;
do {
serial_out(port, SPRD_TXD, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
sprd_stop_tx(port);
}
/* this handles the interrupt from one port */
static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
unsigned int ims;
spin_lock(&port->lock);
ims = serial_in(port, SPRD_IMSR);
if (!ims) {
spin_unlock(&port->lock);
return IRQ_NONE;
}
if (ims & SPRD_IMSR_TIMEOUT)
serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
if (ims & SPRD_IMSR_BREAK_DETECT)
serial_out(port, SPRD_ICLR, SPRD_IMSR_BREAK_DETECT);
if (ims & (SPRD_IMSR_RX_FIFO_FULL | SPRD_IMSR_BREAK_DETECT |
SPRD_IMSR_TIMEOUT))
sprd_rx(port);
if (ims & SPRD_IMSR_TX_FIFO_EMPTY)
sprd_tx(port);
spin_unlock(&port->lock);
return IRQ_HANDLED;
}
static void sprd_uart_dma_startup(struct uart_port *port,
struct sprd_uart_port *sp)
{
int ret;
sprd_request_dma(port);
if (!(sp->rx_dma.enable || sp->tx_dma.enable))
return;
ret = sprd_start_dma_rx(port);
if (ret) {
sp->rx_dma.enable = false;
dma_release_channel(sp->rx_dma.chn);
dev_warn(port->dev, "fail to start RX dma mode\n");
}
sprd_uart_dma_enable(port, true);
}
static int sprd_startup(struct uart_port *port)
{
int ret = 0;
unsigned int ien, fc;
unsigned int timeout;
struct sprd_uart_port *sp;
unsigned long flags;
serial_out(port, SPRD_CTL2,
THLD_TX_EMPTY << THLD_TX_EMPTY_SHIFT | THLD_RX_FULL);
/* clear rx fifo */
timeout = SPRD_TIMEOUT;
while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK)
serial_in(port, SPRD_RXD);
/* clear tx fifo */
timeout = SPRD_TIMEOUT;
while (timeout-- && serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
cpu_relax();
/* clear interrupt */
serial_out(port, SPRD_IEN, 0);
serial_out(port, SPRD_ICLR, ~0);
/* allocate irq */
sp = container_of(port, struct sprd_uart_port, port);
snprintf(sp->name, sizeof(sp->name), "sprd_serial%d", port->line);
sprd_uart_dma_startup(port, sp);
ret = devm_request_irq(port->dev, port->irq, sprd_handle_irq,
IRQF_SHARED, sp->name, port);
if (ret) {
dev_err(port->dev, "fail to request serial irq %d, ret=%d\n",
port->irq, ret);
return ret;
}
fc = serial_in(port, SPRD_CTL1);
fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
serial_out(port, SPRD_CTL1, fc);
/* enable interrupt */
spin_lock_irqsave(&port->lock, flags);
ien = serial_in(port, SPRD_IEN);
ien |= SPRD_IEN_BREAK_DETECT | SPRD_IEN_TIMEOUT;
if (!sp->rx_dma.enable)
ien |= SPRD_IEN_RX_FULL;
serial_out(port, SPRD_IEN, ien);
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
static void sprd_shutdown(struct uart_port *port)
{
sprd_release_dma(port);
serial_out(port, SPRD_IEN, 0);
serial_out(port, SPRD_ICLR, ~0);
devm_free_irq(port->dev, port->irq, port);
}
static void sprd_set_termios(struct uart_port *port, struct ktermios *termios,
const struct ktermios *old)
{
unsigned int baud, quot;
unsigned int lcr = 0, fc;
unsigned long flags;
/* ask the core to calculate the divisor for us */
baud = uart_get_baud_rate(port, termios, old, 0, SPRD_BAUD_IO_LIMIT);
quot = port->uartclk / baud;
/* set data length */
switch (termios->c_cflag & CSIZE) {
case CS5:
lcr |= SPRD_LCR_DATA_LEN5;
break;
case CS6:
lcr |= SPRD_LCR_DATA_LEN6;
break;
case CS7:
lcr |= SPRD_LCR_DATA_LEN7;
break;
case CS8:
default:
lcr |= SPRD_LCR_DATA_LEN8;
break;
}
/* calculate stop bits */
lcr &= ~(SPRD_LCR_STOP_1BIT | SPRD_LCR_STOP_2BIT);
if (termios->c_cflag & CSTOPB)
lcr |= SPRD_LCR_STOP_2BIT;
else
lcr |= SPRD_LCR_STOP_1BIT;
/* calculate parity */
lcr &= ~SPRD_LCR_PARITY;
termios->c_cflag &= ~CMSPAR; /* no support mark/space */
if (termios->c_cflag & PARENB) {
lcr |= SPRD_LCR_PARITY_EN;
if (termios->c_cflag & PARODD)
lcr |= SPRD_LCR_ODD_PAR;
else
lcr |= SPRD_LCR_EVEN_PAR;
}
spin_lock_irqsave(&port->lock, flags);
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
port->read_status_mask = SPRD_LSR_OE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= SPRD_LSR_FE | SPRD_LSR_PE;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= SPRD_LSR_BI;
/* characters to ignore */
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= SPRD_LSR_PE | SPRD_LSR_FE;
if (termios->c_iflag & IGNBRK) {
port->ignore_status_mask |= SPRD_LSR_BI;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= SPRD_LSR_OE;
}
/* flow control */
fc = serial_in(port, SPRD_CTL1);
fc &= ~(RX_HW_FLOW_CTL_THLD | RX_HW_FLOW_CTL_EN | TX_HW_FLOW_CTL_EN);
if (termios->c_cflag & CRTSCTS) {
fc |= RX_HW_FLOW_CTL_THLD;
fc |= RX_HW_FLOW_CTL_EN;
fc |= TX_HW_FLOW_CTL_EN;
}
/* clock divider bit0~bit15 */
serial_out(port, SPRD_CLKD0, quot & SPRD_CLKD0_MASK);
/* clock divider bit16~bit20 */
serial_out(port, SPRD_CLKD1,
(quot & SPRD_CLKD1_MASK) >> SPRD_CLKD1_SHIFT);
serial_out(port, SPRD_LCR, lcr);
fc |= RX_TOUT_THLD_DEF | RX_HFC_THLD_DEF;
serial_out(port, SPRD_CTL1, fc);
spin_unlock_irqrestore(&port->lock, flags);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
}
static const char *sprd_type(struct uart_port *port)
{
return "SPX";
}
static void sprd_release_port(struct uart_port *port)
{
/* nothing to do */
}
static int sprd_request_port(struct uart_port *port)
{
return 0;
}
static void sprd_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE)
port->type = PORT_SPRD;
}
static int sprd_verify_port(struct uart_port *port, struct serial_struct *ser)
{
if (ser->type != PORT_SPRD)
return -EINVAL;
if (port->irq != ser->irq)
return -EINVAL;
if (port->iotype != ser->io_type)
return -EINVAL;
return 0;
}
static void sprd_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct sprd_uart_port *sup =
container_of(port, struct sprd_uart_port, port);
switch (state) {
case UART_PM_STATE_ON:
clk_prepare_enable(sup->clk);
break;
case UART_PM_STATE_OFF:
clk_disable_unprepare(sup->clk);
break;
}
}
#ifdef CONFIG_CONSOLE_POLL
static int sprd_poll_init(struct uart_port *port)
{
if (port->state->pm_state != UART_PM_STATE_ON) {
sprd_pm(port, UART_PM_STATE_ON, 0);
port->state->pm_state = UART_PM_STATE_ON;
}
return 0;
}
static int sprd_poll_get_char(struct uart_port *port)
{
while (!(serial_in(port, SPRD_STS1) & SPRD_RX_FIFO_CNT_MASK))
cpu_relax();
return serial_in(port, SPRD_RXD);
}
static void sprd_poll_put_char(struct uart_port *port, unsigned char ch)
{
while (serial_in(port, SPRD_STS1) & SPRD_TX_FIFO_CNT_MASK)
cpu_relax();
serial_out(port, SPRD_TXD, ch);
}
#endif
static const struct uart_ops serial_sprd_ops = {
.tx_empty = sprd_tx_empty,
.get_mctrl = sprd_get_mctrl,
.set_mctrl = sprd_set_mctrl,
.stop_tx = sprd_stop_tx,
.start_tx = sprd_start_tx,
.stop_rx = sprd_stop_rx,
.break_ctl = sprd_break_ctl,
.startup = sprd_startup,
.shutdown = sprd_shutdown,
.set_termios = sprd_set_termios,
.type = sprd_type,
.release_port = sprd_release_port,
.request_port = sprd_request_port,
.config_port = sprd_config_port,
.verify_port = sprd_verify_port,
.pm = sprd_pm,
#ifdef CONFIG_CONSOLE_POLL
.poll_init = sprd_poll_init,
.poll_get_char = sprd_poll_get_char,
.poll_put_char = sprd_poll_put_char,
#endif
};
#ifdef CONFIG_SERIAL_SPRD_CONSOLE
static void wait_for_xmitr(struct uart_port *port)
{
unsigned int status, tmout = 10000;
/* wait up to 10ms for the character(s) to be sent */
do {
status = serial_in(port, SPRD_STS1);
if (--tmout == 0)
break;
udelay(1);
} while (status & SPRD_TX_FIFO_CNT_MASK);
}
static void sprd_console_putchar(struct uart_port *port, unsigned char ch)
{
wait_for_xmitr(port);
serial_out(port, SPRD_TXD, ch);
}
static void sprd_console_write(struct console *co, const char *s,
unsigned int count)
{
struct uart_port *port = &sprd_port[co->index]->port;
int locked = 1;
unsigned long flags;
if (port->sysrq)
locked = 0;
else if (oops_in_progress)
locked = spin_trylock_irqsave(&port->lock, flags);
else
spin_lock_irqsave(&port->lock, flags);
uart_console_write(port, s, count, sprd_console_putchar);
/* wait for transmitter to become empty */
wait_for_xmitr(port);
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
}
static int sprd_console_setup(struct console *co, char *options)
{
struct sprd_uart_port *sprd_uart_port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index >= UART_NR_MAX || co->index < 0)
co->index = 0;
sprd_uart_port = sprd_port[co->index];
if (!sprd_uart_port || !sprd_uart_port->port.membase) {
pr_info("serial port %d not yet initialized\n", co->index);
return -ENODEV;
}
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(&sprd_uart_port->port, co, baud,
parity, bits, flow);
}
static struct uart_driver sprd_uart_driver;
static struct console sprd_console = {
.name = SPRD_TTY_NAME,
.write = sprd_console_write,
.device = uart_console_device,
.setup = sprd_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &sprd_uart_driver,
};
static int __init sprd_serial_console_init(void)
{
register_console(&sprd_console);
return 0;
}
console_initcall(sprd_serial_console_init);
#define SPRD_CONSOLE (&sprd_console)
/* Support for earlycon */
static void sprd_putc(struct uart_port *port, unsigned char c)
{
unsigned int timeout = SPRD_TIMEOUT;
while (timeout-- &&
!(readl(port->membase + SPRD_LSR) & SPRD_LSR_TX_OVER))
cpu_relax();
writeb(c, port->membase + SPRD_TXD);
}
static void sprd_early_write(struct console *con, const char *s, unsigned int n)
{
struct earlycon_device *dev = con->data;
uart_console_write(&dev->port, s, n, sprd_putc);
}
static int __init sprd_early_console_setup(struct earlycon_device *device,
const char *opt)
{
if (!device->port.membase)
return -ENODEV;
device->con->write = sprd_early_write;
return 0;
}
OF_EARLYCON_DECLARE(sprd_serial, "sprd,sc9836-uart",
sprd_early_console_setup);
#else /* !CONFIG_SERIAL_SPRD_CONSOLE */
#define SPRD_CONSOLE NULL
#endif
static struct uart_driver sprd_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "sprd_serial",
.dev_name = SPRD_TTY_NAME,
.major = 0,
.minor = 0,
.nr = UART_NR_MAX,
.cons = SPRD_CONSOLE,
};
static int sprd_remove(struct platform_device *dev)
{
struct sprd_uart_port *sup = platform_get_drvdata(dev);
if (sup) {
uart_remove_one_port(&sprd_uart_driver, &sup->port);
sprd_port[sup->port.line] = NULL;
sprd_rx_free_buf(sup);
sprd_ports_num--;
}
if (!sprd_ports_num)
uart_unregister_driver(&sprd_uart_driver);
return 0;
}
static bool sprd_uart_is_console(struct uart_port *uport)
{
struct console *cons = sprd_uart_driver.cons;
if ((cons && cons->index >= 0 && cons->index == uport->line) ||
of_console_check(uport->dev->of_node, SPRD_TTY_NAME, uport->line))
return true;
return false;
}
static int sprd_clk_init(struct uart_port *uport)
{
struct clk *clk_uart, *clk_parent;
struct sprd_uart_port *u = container_of(uport, struct sprd_uart_port, port);
clk_uart = devm_clk_get(uport->dev, "uart");
if (IS_ERR(clk_uart)) {
dev_warn(uport->dev, "uart%d can't get uart clock\n",
uport->line);
clk_uart = NULL;
}
clk_parent = devm_clk_get(uport->dev, "source");
if (IS_ERR(clk_parent)) {
dev_warn(uport->dev, "uart%d can't get source clock\n",
uport->line);
clk_parent = NULL;
}
if (!clk_uart || clk_set_parent(clk_uart, clk_parent))
uport->uartclk = SPRD_DEFAULT_SOURCE_CLK;
else
uport->uartclk = clk_get_rate(clk_uart);
u->clk = devm_clk_get(uport->dev, "enable");
if (IS_ERR(u->clk)) {
if (PTR_ERR(u->clk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_warn(uport->dev, "uart%d can't get enable clock\n",
uport->line);
/* To keep console alive even if the error occurred */
if (!sprd_uart_is_console(uport))
return PTR_ERR(u->clk);
u->clk = NULL;
}
return 0;
}
static int sprd_probe(struct platform_device *pdev)
{
struct resource *res;
struct uart_port *up;
struct sprd_uart_port *sport;
int irq;
int index;
int ret;
index = of_alias_get_id(pdev->dev.of_node, "serial");
if (index < 0 || index >= UART_NR_MAX) {
dev_err(&pdev->dev, "got a wrong serial alias id %d\n", index);
return -EINVAL;
}
sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
if (!sport)
return -ENOMEM;
up = &sport->port;
up->dev = &pdev->dev;
up->line = index;
up->type = PORT_SPRD;
up->iotype = UPIO_MEM;
up->uartclk = SPRD_DEF_RATE;
up->fifosize = SPRD_FIFO_SIZE;
up->ops = &serial_sprd_ops;
up->flags = UPF_BOOT_AUTOCONF;
up->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SPRD_CONSOLE);
ret = sprd_clk_init(up);
if (ret)
return ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
up->membase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(up->membase))
return PTR_ERR(up->membase);
up->mapbase = res->start;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
up->irq = irq;
/*
* Allocate one dma buffer to prepare for receive transfer, in case
* memory allocation failure at runtime.
*/
ret = sprd_rx_alloc_buf(sport);
if (ret)
return ret;
if (!sprd_ports_num) {
ret = uart_register_driver(&sprd_uart_driver);
if (ret < 0) {
pr_err("Failed to register SPRD-UART driver\n");
goto free_rx_buf;
}
}
sprd_ports_num++;
sprd_port[index] = sport;
ret = uart_add_one_port(&sprd_uart_driver, up);
if (ret)
goto clean_port;
platform_set_drvdata(pdev, up);
return 0;
clean_port:
sprd_port[index] = NULL;
if (--sprd_ports_num == 0)
uart_unregister_driver(&sprd_uart_driver);
free_rx_buf:
sprd_rx_free_buf(sport);
return ret;
}
#ifdef CONFIG_PM_SLEEP
static int sprd_suspend(struct device *dev)
{
struct sprd_uart_port *sup = dev_get_drvdata(dev);
uart_suspend_port(&sprd_uart_driver, &sup->port);
return 0;
}
static int sprd_resume(struct device *dev)
{
struct sprd_uart_port *sup = dev_get_drvdata(dev);
uart_resume_port(&sprd_uart_driver, &sup->port);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(sprd_pm_ops, sprd_suspend, sprd_resume);
static const struct of_device_id serial_ids[] = {
{.compatible = "sprd,sc9836-uart",},
{}
};
MODULE_DEVICE_TABLE(of, serial_ids);
static struct platform_driver sprd_platform_driver = {
.probe = sprd_probe,
.remove = sprd_remove,
.driver = {
.name = "sprd_serial",
.of_match_table = of_match_ptr(serial_ids),
.pm = &sprd_pm_ops,
},
};
module_platform_driver(sprd_platform_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Spreadtrum SoC serial driver series");
Reference in New Issue View Git Blame Copy Permalink