2012 lines
		
	
	
		
			47 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2012 lines
		
	
	
		
			47 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0
 | 
						|
/*
 | 
						|
 * sc2310 driver
 | 
						|
 *
 | 
						|
 * Copyright (C) 2020 Fuzhou Rockchip Electronics Co., Ltd.
 | 
						|
 *
 | 
						|
 * V0.0X01.0X00 first version,adjust sc2310.
 | 
						|
 * V0.0X01.0X01 add set flip ctrl.
 | 
						|
 * V0.0X01.0X02 1.fixed time limit error
 | 
						|
 *		2.fixed gain conversion function
 | 
						|
 *		3.fixed test pattern error
 | 
						|
 *		4.add quick stream on/off
 | 
						|
 */
 | 
						|
 | 
						|
//#define DEBUG
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/device.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/regulator/consumer.h>
 | 
						|
#include <linux/sysfs.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/version.h>
 | 
						|
#include <linux/rk-camera-module.h>
 | 
						|
#include <media/media-entity.h>
 | 
						|
#include <media/v4l2-async.h>
 | 
						|
#include <media/v4l2-ctrls.h>
 | 
						|
#include <media/v4l2-subdev.h>
 | 
						|
#include <linux/pinctrl/consumer.h>
 | 
						|
#include <linux/rk-preisp.h>
 | 
						|
 | 
						|
#define DRIVER_VERSION			KERNEL_VERSION(0, 0x01, 0x02)
 | 
						|
 | 
						|
#ifndef V4L2_CID_DIGITAL_GAIN
 | 
						|
#define V4L2_CID_DIGITAL_GAIN		V4L2_CID_GAIN
 | 
						|
#endif
 | 
						|
 | 
						|
#define MIPI_FREQ_186M			186000000 //371.25Mbps/lane
 | 
						|
#define MIPI_FREQ_380M			380000000 //760Mbps/lane
 | 
						|
 | 
						|
#define SC2310_MAX_PIXEL_RATE		(MIPI_FREQ_380M * 2 / 10 * 2)
 | 
						|
#define OF_CAMERA_HDR_MODE		"rockchip,camera-hdr-mode"
 | 
						|
 | 
						|
#define SC2310_XVCLK_FREQ		24000000
 | 
						|
 | 
						|
#define CHIP_ID				0x2311
 | 
						|
#define SC2310_REG_CHIP_ID		0x3107
 | 
						|
 | 
						|
#define SC2310_REG_CTRL_MODE		0x0100
 | 
						|
#define SC2310_MODE_SW_STANDBY		0x0
 | 
						|
#define SC2310_MODE_STREAMING		BIT(0)
 | 
						|
 | 
						|
#define	SC2310_EXPOSURE_MIN		2// two lines long exp min
 | 
						|
#define	SC2310_EXPOSURE_STEP	1
 | 
						|
#define SC2310_VTS_MAX			0xffff
 | 
						|
 | 
						|
//long exposure
 | 
						|
#define SC2310_REG_EXP_LONG_H		0x3e00    //[3:0]
 | 
						|
#define SC2310_REG_EXP_LONG_M		0x3e01    //[7:0]
 | 
						|
#define SC2310_REG_EXP_LONG_L		0x3e02    //[7:4]
 | 
						|
 | 
						|
//short exposure
 | 
						|
#define SC2310_REG_EXP_SF_H		0x3e04    //[7:0]
 | 
						|
#define SC2310_REG_EXP_SF_L		0x3e05    //[7:4]
 | 
						|
 | 
						|
//long frame and normal gain reg
 | 
						|
#define SC2310_REG_AGAIN		0x3e08
 | 
						|
#define SC2310_REG_AGAIN_FINE		0x3e09
 | 
						|
 | 
						|
#define SC2310_REG_DGAIN		0x3e06
 | 
						|
#define SC2310_REG_DGAIN_FINE		0x3e07
 | 
						|
 | 
						|
//short fram gain reg
 | 
						|
#define SC2310_SF_REG_AGAIN		0x3e12
 | 
						|
#define SC2310_SF_REG_AGAIN_FINE	0x3e13
 | 
						|
 | 
						|
#define SC2310_SF_REG_DGAIN		0x3e10
 | 
						|
#define SC2310_SF_REG_DGAIN_FINE	0x3e11
 | 
						|
 | 
						|
#define SC2310_GAIN_MIN			0x40
 | 
						|
#define SC2310_GAIN_MAX			(44 * 32 * 64)
 | 
						|
#define SC2310_GAIN_STEP		1
 | 
						|
#define SC2310_GAIN_DEFAULT		0x40
 | 
						|
 | 
						|
//group hold
 | 
						|
#define SC2310_GROUP_UPDATE_ADDRESS	0x3812
 | 
						|
#define SC2310_GROUP_UPDATE_START_DATA	0x00
 | 
						|
#define SC2310_GROUP_UPDATE_LAUNCH	0x30
 | 
						|
 | 
						|
#define SC2310_SOFTWARE_RESET_REG	0x0103
 | 
						|
#define SC2310_REG_TEST_PATTERN		0x4501
 | 
						|
#define SC2310_TEST_PATTERN_ENABLE	0x08
 | 
						|
 | 
						|
#define SC2310_REG_VTS			0x320e
 | 
						|
#define SC2310_FLIP_REG			0x3221
 | 
						|
#define SC2310_FLIP_MASK		0x60
 | 
						|
#define SC2310_MIRROR_MASK		0x06
 | 
						|
#define REG_NULL			0xFFFF
 | 
						|
 | 
						|
#define SC2310_REG_VALUE_08BIT		1
 | 
						|
#define SC2310_REG_VALUE_16BIT		2
 | 
						|
#define SC2310_REG_VALUE_24BIT		3
 | 
						|
 | 
						|
#define SC2310_LANES			2
 | 
						|
#define LONG_FRAME_MAX_EXP		4297
 | 
						|
#define SHORT_FRAME_MAX_EXP		260
 | 
						|
 | 
						|
#define OF_CAMERA_PINCTRL_STATE_DEFAULT	"rockchip,camera_default"
 | 
						|
#define OF_CAMERA_PINCTRL_STATE_SLEEP	"rockchip,camera_sleep"
 | 
						|
 | 
						|
#define SC2310_NAME			"sc2310"
 | 
						|
 | 
						|
static const char * const sc2310_supply_names[] = {
 | 
						|
	"avdd",		/* Analog power */
 | 
						|
	"dovdd",	/* Digital I/O power */
 | 
						|
	"dvdd",		/* Digital core power */
 | 
						|
};
 | 
						|
 | 
						|
#define SC2310_NUM_SUPPLIES ARRAY_SIZE(sc2310_supply_names)
 | 
						|
 | 
						|
struct regval {
 | 
						|
	u16 addr;
 | 
						|
	u8 val;
 | 
						|
};
 | 
						|
 | 
						|
struct sc2310_mode {
 | 
						|
	u32 bus_fmt;
 | 
						|
	u32 width;
 | 
						|
	u32 height;
 | 
						|
	struct v4l2_fract max_fps;
 | 
						|
	u32 hts_def;
 | 
						|
	u32 vts_def;
 | 
						|
	u32 exp_def;
 | 
						|
	const struct regval *reg_list;
 | 
						|
	u32 hdr_mode;
 | 
						|
	u32 mipi_freq_idx;
 | 
						|
	u32 bpp;
 | 
						|
	u32 vc[PAD_MAX];
 | 
						|
};
 | 
						|
 | 
						|
struct sc2310 {
 | 
						|
	struct i2c_client	*client;
 | 
						|
	struct clk		*xvclk;
 | 
						|
	struct gpio_desc	*reset_gpio;
 | 
						|
	struct gpio_desc	*pwdn_gpio;
 | 
						|
	struct regulator_bulk_data supplies[SC2310_NUM_SUPPLIES];
 | 
						|
	struct pinctrl		*pinctrl;
 | 
						|
	struct pinctrl_state	*pins_default;
 | 
						|
	struct pinctrl_state	*pins_sleep;
 | 
						|
	struct v4l2_subdev	subdev;
 | 
						|
	struct media_pad	pad;
 | 
						|
	struct v4l2_ctrl_handler ctrl_handler;
 | 
						|
	struct v4l2_ctrl	*exposure;
 | 
						|
	struct v4l2_ctrl	*anal_gain;
 | 
						|
	struct v4l2_ctrl	*digi_gain;
 | 
						|
	struct v4l2_ctrl	*hblank;
 | 
						|
	struct v4l2_ctrl	*vblank;
 | 
						|
	struct v4l2_ctrl	*test_pattern;
 | 
						|
	struct v4l2_ctrl	*pixel_rate;
 | 
						|
	struct v4l2_ctrl	*link_freq;
 | 
						|
	struct mutex		mutex;
 | 
						|
	struct v4l2_fract	cur_fps;
 | 
						|
	bool			streaming;
 | 
						|
	bool			power_on;
 | 
						|
	const struct sc2310_mode *cur_mode;
 | 
						|
	u32			cfg_num;
 | 
						|
	u32			module_index;
 | 
						|
	const char		*module_facing;
 | 
						|
	const char		*module_name;
 | 
						|
	const char		*len_name;
 | 
						|
	bool			has_init_exp;
 | 
						|
	u32			cur_vts;
 | 
						|
	struct preisp_hdrae_exp_s init_hdrae_exp;
 | 
						|
};
 | 
						|
 | 
						|
#define to_sc2310(sd) container_of(sd, struct sc2310, subdev)
 | 
						|
 | 
						|
/*
 | 
						|
 * Xclk 24Mhz linear 1920*1080 30fps 37.125Mbps/lane
 | 
						|
 */
 | 
						|
static const struct regval sc2310_linear10bit_1920x1080_regs[] = {
 | 
						|
	{0x0103, 0x01},
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x36e9, 0x80},
 | 
						|
	{0x36f9, 0x80},
 | 
						|
	{0x3001, 0xfe},
 | 
						|
	{0x3018, 0x33},
 | 
						|
	{0x3019, 0x0c},
 | 
						|
	{0x301c, 0x78},
 | 
						|
	{0x301f, 0x40},
 | 
						|
	{0x3031, 0x0a},
 | 
						|
	{0x3037, 0x22},
 | 
						|
	{0x3038, 0x22},
 | 
						|
	{0x303f, 0x01},
 | 
						|
	{0x3200, 0x00},
 | 
						|
	{0x3201, 0x04},
 | 
						|
	{0x3202, 0x00},
 | 
						|
	{0x3203, 0x04},
 | 
						|
	{0x3204, 0x07},
 | 
						|
	{0x3205, 0x8b},
 | 
						|
	{0x3206, 0x04},
 | 
						|
	{0x3207, 0x43},
 | 
						|
	{0x3208, 0x07},
 | 
						|
	{0x3209, 0x80},
 | 
						|
	{0x320a, 0x04},
 | 
						|
	{0x320b, 0x38},
 | 
						|
	{0x320c, 0x04},
 | 
						|
	{0x320d, 0x4c},
 | 
						|
	{0x3210, 0x00},
 | 
						|
	{0x3211, 0x04},
 | 
						|
	{0x3212, 0x00},
 | 
						|
	{0x3213, 0x04},
 | 
						|
	{0x3301, 0x10},
 | 
						|
	{0x3302, 0x10},
 | 
						|
	{0x3303, 0x18},
 | 
						|
	{0x3306, 0x60},
 | 
						|
	{0x3308, 0x08},
 | 
						|
	{0x3309, 0x30},
 | 
						|
	{0x330a, 0x00},
 | 
						|
	{0x330b, 0xc8},
 | 
						|
	{0x330e, 0x28},
 | 
						|
	{0x3314, 0x04},
 | 
						|
	{0x331b, 0x83},
 | 
						|
	{0x331e, 0x11},
 | 
						|
	{0x331f, 0x29},
 | 
						|
	{0x3320, 0x01},
 | 
						|
	{0x3324, 0x02},
 | 
						|
	{0x3325, 0x02},
 | 
						|
	{0x3326, 0x00},
 | 
						|
	{0x3333, 0x30},
 | 
						|
	{0x3334, 0x40},
 | 
						|
	{0x333d, 0x08},
 | 
						|
	{0x3341, 0x07},
 | 
						|
	{0x3343, 0x03},
 | 
						|
	{0x3364, 0x1d},
 | 
						|
	{0x3366, 0x80},
 | 
						|
	{0x3367, 0x08},
 | 
						|
	{0x3368, 0x04},
 | 
						|
	{0x3369, 0x00},
 | 
						|
	{0x336a, 0x00},
 | 
						|
	{0x336b, 0x00},
 | 
						|
	{0x336c, 0x42},
 | 
						|
	{0x337f, 0x03},
 | 
						|
	{0x3380, 0x1b},
 | 
						|
	{0x33aa, 0x00},
 | 
						|
	{0x33b6, 0x07},
 | 
						|
	{0x33b7, 0x07},
 | 
						|
	{0x33b8, 0x10},
 | 
						|
	{0x33b9, 0x10},
 | 
						|
	{0x33ba, 0x10},
 | 
						|
	{0x33bb, 0x07},
 | 
						|
	{0x33bc, 0x07},
 | 
						|
	{0x33bd, 0x20},
 | 
						|
	{0x33be, 0x20},
 | 
						|
	{0x33bf, 0x20},
 | 
						|
	{0x360f, 0x05},
 | 
						|
	{0x3621, 0xac},
 | 
						|
	{0x3622, 0xe6},
 | 
						|
	{0x3623, 0x18},
 | 
						|
	{0x3624, 0x47},
 | 
						|
	{0x3630, 0xc8},
 | 
						|
	{0x3631, 0x88},
 | 
						|
	{0x3632, 0x18},
 | 
						|
	{0x3633, 0x22},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x3635, 0x40},
 | 
						|
	{0x3636, 0x65},
 | 
						|
	{0x3637, 0x17},
 | 
						|
	{0x3638, 0x25},
 | 
						|
	{0x363b, 0x08},
 | 
						|
	{0x363c, 0x05},
 | 
						|
	{0x363d, 0x05},
 | 
						|
	{0x3640, 0x00},
 | 
						|
	{0x366e, 0x04},
 | 
						|
	{0x3670, 0x4a},
 | 
						|
	{0x3671, 0xf6},
 | 
						|
	{0x3672, 0x16},
 | 
						|
	{0x3673, 0x16},
 | 
						|
	{0x3674, 0xc8},
 | 
						|
	{0x3675, 0x54},
 | 
						|
	{0x3676, 0x18},
 | 
						|
	{0x3677, 0x22},
 | 
						|
	{0x3678, 0x33},
 | 
						|
	{0x3679, 0x44},
 | 
						|
	{0x367a, 0x40},
 | 
						|
	{0x367b, 0x40},
 | 
						|
	{0x367c, 0x40},
 | 
						|
	{0x367d, 0x58},
 | 
						|
	{0x367e, 0x40},
 | 
						|
	{0x367f, 0x58},
 | 
						|
	{0x3696, 0x83},
 | 
						|
	{0x3697, 0x87},
 | 
						|
	{0x3698, 0x9f},
 | 
						|
	{0x36a0, 0x58},
 | 
						|
	{0x36a1, 0x78},
 | 
						|
	{0x36ea, 0x9f},
 | 
						|
	{0x36eb, 0x0e},
 | 
						|
	{0x36ec, 0x1e},
 | 
						|
	{0x36ed, 0x03},
 | 
						|
	{0x36fa, 0xf8},
 | 
						|
	{0x36fb, 0x10},
 | 
						|
	{0x3802, 0x00},
 | 
						|
	{0x3907, 0x01},
 | 
						|
	{0x3908, 0x01},
 | 
						|
	{0x391e, 0x00},
 | 
						|
	{0x391f, 0xc0},
 | 
						|
	{0x3933, 0x28},
 | 
						|
	{0x3934, 0x0a},
 | 
						|
	{0x3940, 0x1b},
 | 
						|
	{0x3941, 0x40},
 | 
						|
	{0x3942, 0x08},
 | 
						|
	{0x3943, 0x0e},
 | 
						|
	{0x3e00, 0x00},
 | 
						|
	{0x3e01, 0x8c},
 | 
						|
	{0x3e02, 0x40},
 | 
						|
	{0x3e03, 0x0b},
 | 
						|
	{0x3e06, 0x00},
 | 
						|
	{0x3e07, 0x80},
 | 
						|
	{0x3e08, 0x03},
 | 
						|
	{0x3e09, 0x40},
 | 
						|
	{0x3e0e, 0x66},
 | 
						|
	{0x3e14, 0xb0},
 | 
						|
	{0x3e1e, 0x35},
 | 
						|
	{0x3e25, 0x03},
 | 
						|
	{0x3e26, 0x40},
 | 
						|
	{0x3f00, 0x0d},
 | 
						|
	{0x3f04, 0x02},
 | 
						|
	{0x3f05, 0x1e},
 | 
						|
	{0x3f08, 0x04},
 | 
						|
	{0x4500, 0x59},
 | 
						|
	{0x4501, 0xb4},
 | 
						|
	{0x4509, 0x20},
 | 
						|
	{0x4603, 0x00},
 | 
						|
	{0x4809, 0x01},
 | 
						|
	{0x4837, 0x35},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5780, 0x7f},
 | 
						|
	{0x5781, 0x06},
 | 
						|
	{0x5782, 0x04},
 | 
						|
	{0x5783, 0x02},
 | 
						|
	{0x5784, 0x01},
 | 
						|
	{0x5785, 0x16},
 | 
						|
	{0x5786, 0x12},
 | 
						|
	{0x5787, 0x08},
 | 
						|
	{0x5788, 0x02},
 | 
						|
	{0x57a0, 0x00},
 | 
						|
	{0x57a1, 0x74},
 | 
						|
	{0x57a2, 0x01},
 | 
						|
	{0x57a3, 0xf4},
 | 
						|
	{0x57a4, 0xf0},
 | 
						|
	{0x6000, 0x00},
 | 
						|
	{0x6002, 0x00},
 | 
						|
	{0x36e9, 0x51},
 | 
						|
	{0x36f9, 0x04},
 | 
						|
	{REG_NULL, 0x00},
 | 
						|
};
 | 
						|
 | 
						|
/*
 | 
						|
 * Xclk 24Mhz hdr 2to1 STAGGER 1920*1080 30fps 760Mbps/lane
 | 
						|
 */
 | 
						|
static __maybe_unused const struct regval sc2310_hdr10bit_1920x1080_regs[] = {
 | 
						|
	//{0x0103, 0x01},
 | 
						|
	{0x303f, 0x01},
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x36e9, 0xa6},
 | 
						|
	{0x36f9, 0x85},
 | 
						|
	{0x4509, 0x10},
 | 
						|
	{0x337f, 0x03},
 | 
						|
	{0x3368, 0x04},
 | 
						|
	{0x3369, 0x00},
 | 
						|
	{0x336a, 0x00},
 | 
						|
	{0x336b, 0x00},
 | 
						|
	{0x3367, 0x08},
 | 
						|
	{0x3326, 0x00},
 | 
						|
	{0x3631, 0x88},
 | 
						|
	{0x3018, 0x33},
 | 
						|
	{0x3031, 0x0a},
 | 
						|
	{0x3001, 0xfe},
 | 
						|
	{0x4603, 0x00},
 | 
						|
	{0x3640, 0x00},
 | 
						|
	{0x3907, 0x01},
 | 
						|
	{0x3908, 0x01},
 | 
						|
	{0x3320, 0x01},
 | 
						|
	{0x57a4, 0xf0},
 | 
						|
	{0x3333, 0x30},
 | 
						|
	{0x331b, 0x83},
 | 
						|
	{0x3334, 0x40},
 | 
						|
	{0x3302, 0x10},
 | 
						|
	{0x36eb, 0x0a},
 | 
						|
	{0x36ec, 0x0e},
 | 
						|
	{0x3f08, 0x04},
 | 
						|
	{0x4501, 0xa4},
 | 
						|
	{0x3309, 0x48},
 | 
						|
	{0x331f, 0x39},
 | 
						|
	{0x330a, 0x00},
 | 
						|
	{0x3308, 0x10},
 | 
						|
	{0x3366, 0xc0},
 | 
						|
	{0x33aa, 0x00},
 | 
						|
	{0x391e, 0x00},
 | 
						|
	{0x391f, 0xc0},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x4500, 0x59},
 | 
						|
	{0x3623, 0x18},
 | 
						|
	{0x3f00, 0x0d},
 | 
						|
	{0x336c, 0x42},
 | 
						|
	{0x3933, 0x28},
 | 
						|
	{0x3934, 0x0a},
 | 
						|
	{0x3940, 0x1b},
 | 
						|
	{0x3941, 0x40},
 | 
						|
	{0x3942, 0x08},
 | 
						|
	{0x3943, 0x0e},
 | 
						|
	{0x3624, 0x47},
 | 
						|
	{0x3621, 0xac},
 | 
						|
	{0x3222, 0x29},
 | 
						|
	{0x3901, 0x02},
 | 
						|
	{0x363b, 0x08},
 | 
						|
	{0x363c, 0x05},
 | 
						|
	{0x363d, 0x05},
 | 
						|
	{0x3324, 0x02},
 | 
						|
	{0x3325, 0x02},
 | 
						|
	{0x333d, 0x08},
 | 
						|
	{0x3314, 0x04},
 | 
						|
	{0x3802, 0x00},
 | 
						|
	{0x3e14, 0xb0},
 | 
						|
	{0x3e1e, 0x35},
 | 
						|
	{0x3e0e, 0x66},
 | 
						|
	{0x3364, 0x1d},
 | 
						|
	{0x33b6, 0x07},
 | 
						|
	{0x33b7, 0x07},
 | 
						|
	{0x33b8, 0x10},
 | 
						|
	{0x33b9, 0x10},
 | 
						|
	{0x33ba, 0x10},
 | 
						|
	{0x33bb, 0x07},
 | 
						|
	{0x33bc, 0x07},
 | 
						|
	{0x33bd, 0x18},
 | 
						|
	{0x33be, 0x18},
 | 
						|
	{0x33bf, 0x18},
 | 
						|
	{0x360f, 0x05},
 | 
						|
	{0x367a, 0x40},
 | 
						|
	{0x367b, 0x40},
 | 
						|
	{0x3671, 0xf6},
 | 
						|
	{0x3672, 0x16},
 | 
						|
	{0x3673, 0x16},
 | 
						|
	{0x366e, 0x04},
 | 
						|
	{0x367c, 0x40},
 | 
						|
	{0x367d, 0x58},
 | 
						|
	{0x3674, 0xc8},
 | 
						|
	{0x3675, 0x54},
 | 
						|
	{0x3676, 0x18},
 | 
						|
	{0x367e, 0x40},
 | 
						|
	{0x367f, 0x58},
 | 
						|
	{0x3677, 0x22},
 | 
						|
	{0x3678, 0x53},
 | 
						|
	{0x3679, 0x55},
 | 
						|
	{0x36a0, 0x58},
 | 
						|
	{0x36a1, 0x78},
 | 
						|
	{0x3696, 0x9f},
 | 
						|
	{0x3697, 0x9f},
 | 
						|
	{0x3698, 0x9f},
 | 
						|
	{0x301c, 0x78},
 | 
						|
	{0x3037, 0x24},
 | 
						|
	{0x3038, 0x44},
 | 
						|
	{0x3632, 0x18},
 | 
						|
	{0x4809, 0x01},
 | 
						|
	{0x3625, 0x01},
 | 
						|
	{0x3670, 0x6a},
 | 
						|
	{0x369e, 0x40},
 | 
						|
	{0x369f, 0x40},
 | 
						|
	{0x3693, 0x20},
 | 
						|
	{0x3694, 0x40},
 | 
						|
	{0x3695, 0x40},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5780, 0x7f},
 | 
						|
	{0x57a0, 0x00},
 | 
						|
	{0x57a1, 0x74},
 | 
						|
	{0x57a2, 0x01},
 | 
						|
	{0x57a3, 0xf4},
 | 
						|
	{0x5781, 0x06},
 | 
						|
	{0x5782, 0x04},
 | 
						|
	{0x5783, 0x02},
 | 
						|
	{0x5784, 0x01},
 | 
						|
	{0x5785, 0x16},
 | 
						|
	{0x5786, 0x12},
 | 
						|
	{0x5787, 0x08},
 | 
						|
	{0x5788, 0x02},
 | 
						|
	{0x3637, 0x0c},
 | 
						|
	{0x3638, 0x24},
 | 
						|
	{0x3200, 0x00},
 | 
						|
	{0x3201, 0x04},
 | 
						|
	{0x3202, 0x00},
 | 
						|
	{0x3203, 0x00},
 | 
						|
	{0x3204, 0x07},
 | 
						|
	{0x3205, 0x8b},
 | 
						|
	{0x3206, 0x04},
 | 
						|
	{0x3207, 0x3f},
 | 
						|
	{0x3208, 0x07},
 | 
						|
	{0x3209, 0x80},
 | 
						|
	{0x320a, 0x04},
 | 
						|
	{0x320b, 0x38},
 | 
						|
	{0x3211, 0x04},
 | 
						|
	{0x3213, 0x04},
 | 
						|
	{0x3380, 0x1b},
 | 
						|
	{0x3341, 0x07},
 | 
						|
	{0x3343, 0x03},
 | 
						|
	{0x3e25, 0x03},
 | 
						|
	{0x3e26, 0x40},
 | 
						|
	{0x391d, 0x24},
 | 
						|
	{0x36ea, 0x2d},
 | 
						|
	{0x36ed, 0x23},
 | 
						|
	{0x36fa, 0x6a},
 | 
						|
	{0x36fb, 0x20},
 | 
						|
	{0x320c, 0x04},
 | 
						|
	{0x320d, 0x76},
 | 
						|
	{0x3636, 0xa8},
 | 
						|
	{0x3f04, 0x02},
 | 
						|
	{0x3f05, 0x33},
 | 
						|
	{0x4837, 0x1a},
 | 
						|
	{0x331e, 0x21},
 | 
						|
	{0x3303, 0x30},
 | 
						|
	{0x330b, 0xb8},
 | 
						|
	{0x3306, 0x5c},
 | 
						|
	{0x330e, 0x30},
 | 
						|
	{0x4816, 0x51},
 | 
						|
	{0x3220, 0x51},
 | 
						|
	{0x4602, 0x0f},
 | 
						|
	{0x33c0, 0x05},
 | 
						|
	{0x6000, 0x06},
 | 
						|
	{0x6002, 0x06},
 | 
						|
	{0x320e, 0x0a},//{0x320e, 0x08},
 | 
						|
	{0x320f, 0x66},//{0x320f, 0xaa},
 | 
						|
	{0x3e00, 0x01},
 | 
						|
	{0x3e01, 0x03},
 | 
						|
	{0x3e02, 0xe0},
 | 
						|
	{0x3e04, 0x10},
 | 
						|
	{0x3e05, 0x40},
 | 
						|
	{0x3e23, 0x00},
 | 
						|
	{0x3e24, 0x86},
 | 
						|
	{0x3e03, 0x0b},
 | 
						|
	{0x3e06, 0x00},
 | 
						|
	{0x3e07, 0x80},
 | 
						|
	{0x3e08, 0x03},
 | 
						|
	{0x3e09, 0x40},
 | 
						|
	{0x3622, 0xf6},
 | 
						|
	{0x3633, 0x22},
 | 
						|
	{0x3630, 0xc8},
 | 
						|
	{0x3301, 0x10},
 | 
						|
	{0x363a, 0x83},
 | 
						|
	{0x3635, 0x20},
 | 
						|
	{0x36e9, 0x40},
 | 
						|
	{0x36f9, 0x05},
 | 
						|
	{REG_NULL, 0x00},
 | 
						|
};
 | 
						|
 | 
						|
/*
 | 
						|
 * The width and height must be configured to be
 | 
						|
 * the same as the current output resolution of the sensor.
 | 
						|
 * The input width of the isp needs to be 16 aligned.
 | 
						|
 * The input height of the isp needs to be 8 aligned.
 | 
						|
 * If the width or height does not meet the alignment rules,
 | 
						|
 * you can configure the cropping parameters with the following function to
 | 
						|
 * crop out the appropriate resolution.
 | 
						|
 * struct v4l2_subdev_pad_ops {
 | 
						|
 *	.get_selection
 | 
						|
 * }
 | 
						|
 */
 | 
						|
static const struct sc2310_mode supported_modes[] = {
 | 
						|
	{
 | 
						|
		/* linear modes */
 | 
						|
		.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
		.width = 1920,
 | 
						|
		.height = 1080,
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 300000,
 | 
						|
		},
 | 
						|
		.exp_def = 0x048c / 2,
 | 
						|
		.hts_def = 0x044c * 2,
 | 
						|
		.vts_def = 0x0465,
 | 
						|
		.reg_list = sc2310_linear10bit_1920x1080_regs,
 | 
						|
		.hdr_mode = NO_HDR,
 | 
						|
		.mipi_freq_idx = 0,
 | 
						|
		.bpp = 10,
 | 
						|
		.vc[PAD0] = 0,
 | 
						|
	},
 | 
						|
	{
 | 
						|
		/* 2 to 1 hdr */
 | 
						|
		.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
		.width = 1920,
 | 
						|
		.height = 1080,
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 250000,
 | 
						|
		},
 | 
						|
		.exp_def = 0x103e / 2,
 | 
						|
		.hts_def = 0x0476 * 2,
 | 
						|
		.vts_def = 0x0a66,//0x08aa
 | 
						|
		.reg_list = sc2310_hdr10bit_1920x1080_regs,
 | 
						|
		.hdr_mode = HDR_X2,
 | 
						|
		.mipi_freq_idx = 1,
 | 
						|
		.bpp = 10,
 | 
						|
		.vc[PAD0] = 1,
 | 
						|
		.vc[PAD1] = 0,//L->csi wr0
 | 
						|
		.vc[PAD2] = 1,
 | 
						|
		.vc[PAD3] = 1,//M->csi wr2
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static const s64 link_freq_items[] = {
 | 
						|
	MIPI_FREQ_186M,
 | 
						|
	MIPI_FREQ_380M,
 | 
						|
};
 | 
						|
 | 
						|
static const char * const sc2310_test_pattern_menu[] = {
 | 
						|
	"Disabled",
 | 
						|
	"Vertical Color Bar Type 1"
 | 
						|
};
 | 
						|
 | 
						|
/* Write registers up to 4 at a time */
 | 
						|
static int sc2310_write_reg(struct i2c_client *client, u16 reg,
 | 
						|
			    u32 len, u32 val)
 | 
						|
{
 | 
						|
	u32 buf_i, val_i;
 | 
						|
	u8 buf[6];
 | 
						|
	u8 *val_p;
 | 
						|
	__be32 val_be;
 | 
						|
 | 
						|
	if (len > 4)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	buf[0] = reg >> 8;
 | 
						|
	buf[1] = reg & 0xff;
 | 
						|
 | 
						|
	val_be = cpu_to_be32(val);
 | 
						|
	val_p = (u8 *)&val_be;
 | 
						|
	buf_i = 2;
 | 
						|
	val_i = 4 - len;
 | 
						|
 | 
						|
	while (val_i < 4)
 | 
						|
		buf[buf_i++] = val_p[val_i++];
 | 
						|
 | 
						|
	if (i2c_master_send(client, buf, len + 2) != len + 2)
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_write_array(struct i2c_client *client,
 | 
						|
			       const struct regval *regs)
 | 
						|
{
 | 
						|
	u32 i;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) {
 | 
						|
		ret |= sc2310_write_reg(client, regs[i].addr,
 | 
						|
			SC2310_REG_VALUE_08BIT, regs[i].val);
 | 
						|
	}
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* Read registers up to 4 at a time */
 | 
						|
static int sc2310_read_reg(struct i2c_client *client,
 | 
						|
			    u16 reg,
 | 
						|
			    unsigned int len,
 | 
						|
			    u32 *val)
 | 
						|
{
 | 
						|
	struct i2c_msg msgs[2];
 | 
						|
	u8 *data_be_p;
 | 
						|
	__be32 data_be = 0;
 | 
						|
	__be16 reg_addr_be = cpu_to_be16(reg);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (len > 4 || !len)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	data_be_p = (u8 *)&data_be;
 | 
						|
	/* Write register address */
 | 
						|
	msgs[0].addr = client->addr;
 | 
						|
	msgs[0].flags = 0;
 | 
						|
	msgs[0].len = 2;
 | 
						|
	msgs[0].buf = (u8 *)®_addr_be;
 | 
						|
 | 
						|
	/* Read data from register */
 | 
						|
	msgs[1].addr = client->addr;
 | 
						|
	msgs[1].flags = I2C_M_RD;
 | 
						|
	msgs[1].len = len;
 | 
						|
	msgs[1].buf = &data_be_p[4 - len];
 | 
						|
 | 
						|
	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 | 
						|
	if (ret != ARRAY_SIZE(msgs))
 | 
						|
		return -EIO;
 | 
						|
 | 
						|
	*val = be32_to_cpu(data_be);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_get_reso_dist(const struct sc2310_mode *mode,
 | 
						|
				struct v4l2_mbus_framefmt *framefmt)
 | 
						|
{
 | 
						|
	return abs(mode->width - framefmt->width) +
 | 
						|
	       abs(mode->height - framefmt->height);
 | 
						|
}
 | 
						|
 | 
						|
static const struct sc2310_mode *
 | 
						|
sc2310_find_best_fit(struct sc2310 *sc2310, struct v4l2_subdev_format *fmt)
 | 
						|
{
 | 
						|
	struct v4l2_mbus_framefmt *framefmt = &fmt->format;
 | 
						|
	int dist;
 | 
						|
	int cur_best_fit = 0;
 | 
						|
	int cur_best_fit_dist = -1;
 | 
						|
	unsigned int i;
 | 
						|
 | 
						|
	for (i = 0; i < sc2310->cfg_num; i++) {
 | 
						|
		dist = sc2310_get_reso_dist(&supported_modes[i], framefmt);
 | 
						|
		if ((cur_best_fit_dist == -1 || dist <= cur_best_fit_dist) &&
 | 
						|
			(supported_modes[i].bus_fmt == framefmt->code)) {
 | 
						|
			cur_best_fit_dist = dist;
 | 
						|
			cur_best_fit = i;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return &supported_modes[cur_best_fit];
 | 
						|
}
 | 
						|
 | 
						|
static void sc2310_change_mode(struct sc2310 *sc2310, const struct sc2310_mode *mode)
 | 
						|
{
 | 
						|
	sc2310->cur_mode = mode;
 | 
						|
	sc2310->cur_vts = sc2310->cur_mode->vts_def;
 | 
						|
	dev_info(&sc2310->client->dev, "set fmt: cur_mode: %dx%d, hdr: %d\n",
 | 
						|
		mode->width, mode->height, mode->hdr_mode);
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_set_fmt(struct v4l2_subdev *sd,
 | 
						|
			  struct v4l2_subdev_state *sd_state,
 | 
						|
			  struct v4l2_subdev_format *fmt)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	const struct sc2310_mode *mode;
 | 
						|
	s64 h_blank, vblank_def;
 | 
						|
	u64 pixel_rate = 0;
 | 
						|
 | 
						|
	mutex_lock(&sc2310->mutex);
 | 
						|
 | 
						|
	mode = sc2310_find_best_fit(sc2310, fmt);
 | 
						|
	fmt->format.code = mode->bus_fmt;
 | 
						|
	fmt->format.width = mode->width;
 | 
						|
	fmt->format.height = mode->height;
 | 
						|
	fmt->format.field = V4L2_FIELD_NONE;
 | 
						|
	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 | 
						|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
 | 
						|
		*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
 | 
						|
#else
 | 
						|
		mutex_unlock(&sc2310->mutex);
 | 
						|
		return -ENOTTY;
 | 
						|
#endif
 | 
						|
	} else {
 | 
						|
		sc2310_change_mode(sc2310, mode);
 | 
						|
		h_blank = mode->hts_def - mode->width;
 | 
						|
		__v4l2_ctrl_modify_range(sc2310->hblank, h_blank,
 | 
						|
					 h_blank, 1, h_blank);
 | 
						|
		vblank_def = mode->vts_def - mode->height;
 | 
						|
		__v4l2_ctrl_modify_range(sc2310->vblank, vblank_def,
 | 
						|
					 SC2310_VTS_MAX - mode->height,
 | 
						|
					 1, vblank_def);
 | 
						|
		__v4l2_ctrl_s_ctrl(sc2310->link_freq, mode->mipi_freq_idx);
 | 
						|
		pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] /
 | 
						|
			mode->bpp * 2 * SC2310_LANES;
 | 
						|
		__v4l2_ctrl_s_ctrl_int64(sc2310->pixel_rate, pixel_rate);
 | 
						|
		sc2310->cur_fps = mode->max_fps;
 | 
						|
		sc2310->cur_vts = mode->vts_def;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&sc2310->mutex);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_get_fmt(struct v4l2_subdev *sd,
 | 
						|
			  struct v4l2_subdev_state *sd_state,
 | 
						|
			  struct v4l2_subdev_format *fmt)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	const struct sc2310_mode *mode = sc2310->cur_mode;
 | 
						|
 | 
						|
	mutex_lock(&sc2310->mutex);
 | 
						|
	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 | 
						|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
 | 
						|
		fmt->format = *v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
 | 
						|
#else
 | 
						|
		mutex_unlock(&sc2310->mutex);
 | 
						|
		return -ENOTTY;
 | 
						|
#endif
 | 
						|
	} else {
 | 
						|
		fmt->format.width = mode->width;
 | 
						|
		fmt->format.height = mode->height;
 | 
						|
		fmt->format.code = mode->bus_fmt;
 | 
						|
		fmt->format.field = V4L2_FIELD_NONE;
 | 
						|
		if (fmt->pad < PAD_MAX && mode->hdr_mode != NO_HDR)
 | 
						|
			fmt->reserved[0] = mode->vc[fmt->pad];
 | 
						|
		else
 | 
						|
			fmt->reserved[0] = mode->vc[PAD0];
 | 
						|
	}
 | 
						|
	mutex_unlock(&sc2310->mutex);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_enum_mbus_code(struct v4l2_subdev *sd,
 | 
						|
				 struct v4l2_subdev_state *sd_state,
 | 
						|
				 struct v4l2_subdev_mbus_code_enum *code)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	if (code->index != 0)
 | 
						|
		return -EINVAL;
 | 
						|
	code->code = sc2310->cur_mode->bus_fmt;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_enum_frame_sizes(struct v4l2_subdev *sd,
 | 
						|
				   struct v4l2_subdev_state *sd_state,
 | 
						|
				   struct v4l2_subdev_frame_size_enum *fse)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	if (fse->index >= sc2310->cfg_num)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (fse->code != supported_modes[fse->index].bus_fmt)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	fse->min_width  = supported_modes[fse->index].width;
 | 
						|
	fse->max_width  = supported_modes[fse->index].width;
 | 
						|
	fse->max_height = supported_modes[fse->index].height;
 | 
						|
	fse->min_height = supported_modes[fse->index].height;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_enable_test_pattern(struct sc2310 *sc2310, u32 pattern)
 | 
						|
{
 | 
						|
	u32 val = 0;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	ret = sc2310_read_reg(sc2310->client, SC2310_REG_TEST_PATTERN,
 | 
						|
			      SC2310_REG_VALUE_08BIT, &val);
 | 
						|
	if (pattern)
 | 
						|
		val |= SC2310_TEST_PATTERN_ENABLE;
 | 
						|
	else
 | 
						|
		val &= ~SC2310_TEST_PATTERN_ENABLE;
 | 
						|
	ret |= sc2310_write_reg(sc2310->client, SC2310_REG_TEST_PATTERN,
 | 
						|
				SC2310_REG_VALUE_08BIT, val);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_g_frame_interval(struct v4l2_subdev *sd,
 | 
						|
				   struct v4l2_subdev_frame_interval *fi)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	const struct sc2310_mode *mode = sc2310->cur_mode;
 | 
						|
 | 
						|
	if (sc2310->streaming)
 | 
						|
		fi->interval = sc2310->cur_fps;
 | 
						|
	else
 | 
						|
		fi->interval = mode->max_fps;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad_id,
 | 
						|
				struct v4l2_mbus_config *config)
 | 
						|
{
 | 
						|
	config->type = V4L2_MBUS_CSI2_DPHY;
 | 
						|
	config->bus.mipi_csi2.num_data_lanes = SC2310_LANES;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void sc2310_get_module_inf(struct sc2310 *sc2310,
 | 
						|
				  struct rkmodule_inf *inf)
 | 
						|
{
 | 
						|
	memset(inf, 0, sizeof(*inf));
 | 
						|
	strlcpy(inf->base.sensor, SC2310_NAME, sizeof(inf->base.sensor));
 | 
						|
	strlcpy(inf->base.module, sc2310->module_name,
 | 
						|
		sizeof(inf->base.module));
 | 
						|
	strlcpy(inf->base.lens, sc2310->len_name, sizeof(inf->base.lens));
 | 
						|
}
 | 
						|
 | 
						|
static void sc2310_get_gain_reg(u32 val, u32 *again_reg, u32 *again_fine_reg,
 | 
						|
	u32 *dgain_reg, u32 *dgain_fine_reg)
 | 
						|
{
 | 
						|
	u8 u8Reg0x3e09 = 0x40, u8Reg0x3e08 = 0x03, u8Reg0x3e07 = 0x80, u8Reg0x3e06 = 0x00;
 | 
						|
	u32 aCoarseGain = 0;
 | 
						|
	u32 aFineGain = 0;
 | 
						|
	u32 dCoarseGain = 0;
 | 
						|
	u32 dFineGain = 0;
 | 
						|
	u32 again = 0;
 | 
						|
	u32 dgain = 0;
 | 
						|
 | 
						|
	if (val <= 2764) {
 | 
						|
		again = val;
 | 
						|
		dgain = 128;
 | 
						|
	} else {
 | 
						|
		again = 2764;
 | 
						|
		dgain = val * 128 / again;
 | 
						|
	}
 | 
						|
 | 
						|
	//again
 | 
						|
	if (again <= 174) {
 | 
						|
		//a_gain < 2.72x
 | 
						|
		for (aCoarseGain = 1; aCoarseGain <= 2; aCoarseGain = aCoarseGain * 2) {
 | 
						|
			//1,2,4,8,16
 | 
						|
			if (again < (64 * 2 * aCoarseGain))
 | 
						|
				break;
 | 
						|
		}
 | 
						|
 | 
						|
		aFineGain = again / aCoarseGain;
 | 
						|
	} else {
 | 
						|
		for (aCoarseGain = 1; aCoarseGain <= 8; aCoarseGain = aCoarseGain * 2) {
 | 
						|
			//1,2,4,8
 | 
						|
			if (again < (64 * 2 * aCoarseGain * 272 / 100))
 | 
						|
				break;
 | 
						|
		}
 | 
						|
		aFineGain = 100 * again / aCoarseGain / 272;
 | 
						|
	}
 | 
						|
	for ( ; aCoarseGain >= 2; aCoarseGain = aCoarseGain / 2)
 | 
						|
		u8Reg0x3e08 = (u8Reg0x3e08 << 1) | 0x01;
 | 
						|
 | 
						|
	u8Reg0x3e09 = aFineGain;
 | 
						|
 | 
						|
	//dcg = 2.72	-->		2.72*1024=2785.28
 | 
						|
	u8Reg0x3e08 = (again > 174) ? (u8Reg0x3e08 | 0x20) : (u8Reg0x3e08 & 0x1f);
 | 
						|
 | 
						|
	//------------------------------------------------------
 | 
						|
	//dgain
 | 
						|
	for (dCoarseGain = 1; dCoarseGain <= 16; dCoarseGain = dCoarseGain * 2) {
 | 
						|
		//1,2,4,8,16
 | 
						|
		if (dgain < (256 * dCoarseGain))
 | 
						|
			break;
 | 
						|
	}
 | 
						|
	dFineGain = dgain / dCoarseGain;
 | 
						|
 | 
						|
	for ( ; dCoarseGain >= 2; dCoarseGain = dCoarseGain / 2)
 | 
						|
		u8Reg0x3e06 = (u8Reg0x3e06 << 1) | 0x01;
 | 
						|
 | 
						|
	u8Reg0x3e07 = dFineGain;
 | 
						|
 | 
						|
	*again_reg = u8Reg0x3e08;
 | 
						|
	*again_fine_reg = u8Reg0x3e09;
 | 
						|
	*dgain_reg = u8Reg0x3e06;
 | 
						|
	*dgain_fine_reg = u8Reg0x3e07;
 | 
						|
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_set_hdrae(struct sc2310 *sc2310,
 | 
						|
			     struct preisp_hdrae_exp_s *ae)
 | 
						|
{
 | 
						|
	struct i2c_client *client = sc2310->client;
 | 
						|
	u32 l_exp_time, m_exp_time, s_exp_time;
 | 
						|
	u32 l_a_gain, m_a_gain, s_a_gain;
 | 
						|
	u32 l_again, l_again_fine, l_dgain, l_dgain_fine;
 | 
						|
	u32 s_again, s_again_fine, s_dgain, s_dgain_fine;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (!sc2310->has_init_exp && !sc2310->streaming) {
 | 
						|
		sc2310->init_hdrae_exp = *ae;
 | 
						|
		sc2310->has_init_exp = true;
 | 
						|
		dev_dbg(&client->dev, "sc2310 is not streaming, save hdr ae!\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	l_exp_time = ae->long_exp_reg;
 | 
						|
	m_exp_time = ae->middle_exp_reg;
 | 
						|
	s_exp_time = ae->short_exp_reg;
 | 
						|
	l_a_gain = ae->long_gain_reg;
 | 
						|
	m_a_gain = ae->middle_gain_reg;
 | 
						|
	s_a_gain = ae->short_gain_reg;
 | 
						|
	dev_dbg(&client->dev,
 | 
						|
		"rev exp req: L_exp: 0x%x, 0x%x, M_exp: 0x%x, 0x%x S_exp: 0x%x, 0x%x\n",
 | 
						|
		l_exp_time, m_exp_time, s_exp_time,
 | 
						|
		l_a_gain, m_a_gain, s_a_gain);
 | 
						|
 | 
						|
	if (sc2310->cur_mode->hdr_mode == HDR_X2) {
 | 
						|
		l_a_gain = m_a_gain;
 | 
						|
		l_exp_time = m_exp_time;
 | 
						|
	}
 | 
						|
	sc2310_get_gain_reg(l_a_gain, &l_again, &l_again_fine, &l_dgain, &l_dgain_fine);
 | 
						|
	sc2310_get_gain_reg(s_a_gain, &s_again, &s_again_fine, &s_dgain, &s_dgain_fine);
 | 
						|
 | 
						|
	l_exp_time = l_exp_time << 1;
 | 
						|
	s_exp_time = s_exp_time << 1;
 | 
						|
 | 
						|
	if (l_exp_time > LONG_FRAME_MAX_EXP)
 | 
						|
		l_exp_time = LONG_FRAME_MAX_EXP;
 | 
						|
 | 
						|
	if (s_exp_time > SHORT_FRAME_MAX_EXP)
 | 
						|
		s_exp_time = SHORT_FRAME_MAX_EXP;
 | 
						|
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_L,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(l_exp_time << 4 & 0XF0));
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_M,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(l_exp_time >> 4 & 0XFF));
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_H,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(l_exp_time >> 12 & 0X0F));
 | 
						|
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_AGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					l_again);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_AGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					l_again_fine);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_DGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					l_dgain);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_DGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					l_dgain_fine);
 | 
						|
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_SF_L,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(s_exp_time << 4 & 0XF0));
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_SF_H,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(s_exp_time >> 4 & 0XFF));
 | 
						|
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_SF_REG_AGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					s_again);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_SF_REG_AGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					s_again_fine);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_SF_REG_DGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					s_dgain);
 | 
						|
	ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_SF_REG_DGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					s_dgain_fine);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_get_channel_info(struct sc2310 *sc2310, struct rkmodule_channel_info *ch_info)
 | 
						|
{
 | 
						|
	if (ch_info->index < PAD0 || ch_info->index >= PAD_MAX)
 | 
						|
		return -EINVAL;
 | 
						|
	ch_info->vc = sc2310->cur_mode->vc[ch_info->index];
 | 
						|
	ch_info->width = sc2310->cur_mode->width;
 | 
						|
	ch_info->height = sc2310->cur_mode->height;
 | 
						|
	ch_info->bus_fmt = sc2310->cur_mode->bus_fmt;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static long sc2310_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	struct rkmodule_hdr_cfg *hdr_cfg;
 | 
						|
	const struct sc2310_mode *mode;
 | 
						|
	struct rkmodule_channel_info *ch_info;
 | 
						|
	long ret = 0;
 | 
						|
	u64 pixel_rate = 0;
 | 
						|
	u32 i, h, w, stream;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case PREISP_CMD_SET_HDRAE_EXP:
 | 
						|
		ret = sc2310_set_hdrae(sc2310, arg);
 | 
						|
		break;
 | 
						|
	case RKMODULE_SET_HDR_CFG:
 | 
						|
		hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
 | 
						|
		if (sc2310->streaming) {
 | 
						|
			ret = sc2310_write_array(sc2310->client, sc2310->cur_mode->reg_list);
 | 
						|
			if (ret)
 | 
						|
				return ret;
 | 
						|
		}
 | 
						|
		w = sc2310->cur_mode->width;
 | 
						|
		h = sc2310->cur_mode->height;
 | 
						|
		for (i = 0; i < sc2310->cfg_num; i++) {
 | 
						|
			if (w == supported_modes[i].width &&
 | 
						|
			h == supported_modes[i].height &&
 | 
						|
			supported_modes[i].hdr_mode == hdr_cfg->hdr_mode) {
 | 
						|
				sc2310_change_mode(sc2310, &supported_modes[i]);
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (i == sc2310->cfg_num) {
 | 
						|
			dev_err(&sc2310->client->dev,
 | 
						|
				"not find hdr mode:%d %dx%d config\n",
 | 
						|
				hdr_cfg->hdr_mode, w, h);
 | 
						|
			ret = -EINVAL;
 | 
						|
		} else {
 | 
						|
			mode = sc2310->cur_mode;
 | 
						|
			w = mode->hts_def - mode->width;
 | 
						|
			h = mode->vts_def - mode->height;
 | 
						|
			__v4l2_ctrl_modify_range(sc2310->hblank, w, w, 1, w);
 | 
						|
			__v4l2_ctrl_modify_range(sc2310->vblank, h,
 | 
						|
				SC2310_VTS_MAX - mode->height,
 | 
						|
				1, h);
 | 
						|
			__v4l2_ctrl_s_ctrl(sc2310->link_freq, mode->mipi_freq_idx);
 | 
						|
			pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] /
 | 
						|
				mode->bpp * 2 * SC2310_LANES;
 | 
						|
			__v4l2_ctrl_s_ctrl_int64(sc2310->pixel_rate,
 | 
						|
						 pixel_rate);
 | 
						|
			sc2310->cur_fps = mode->max_fps;
 | 
						|
			sc2310->cur_vts = mode->vts_def;
 | 
						|
			dev_info(&sc2310->client->dev,
 | 
						|
				"sensor mode: %d\n", mode->hdr_mode);
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case RKMODULE_GET_MODULE_INFO:
 | 
						|
		sc2310_get_module_inf(sc2310, (struct rkmodule_inf *)arg);
 | 
						|
		break;
 | 
						|
	case RKMODULE_GET_HDR_CFG:
 | 
						|
		hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
 | 
						|
		hdr_cfg->esp.mode = HDR_NORMAL_VC;
 | 
						|
		hdr_cfg->hdr_mode = sc2310->cur_mode->hdr_mode;
 | 
						|
		break;
 | 
						|
	case RKMODULE_SET_QUICK_STREAM:
 | 
						|
 | 
						|
		stream = *((u32 *)arg);
 | 
						|
 | 
						|
		if (stream)
 | 
						|
			ret = sc2310_write_reg(sc2310->client, SC2310_REG_CTRL_MODE,
 | 
						|
				SC2310_REG_VALUE_08BIT, SC2310_MODE_STREAMING);
 | 
						|
		else
 | 
						|
			ret = sc2310_write_reg(sc2310->client, SC2310_REG_CTRL_MODE,
 | 
						|
				SC2310_REG_VALUE_08BIT, SC2310_MODE_SW_STANDBY);
 | 
						|
		break;
 | 
						|
	case RKMODULE_GET_CHANNEL_INFO:
 | 
						|
		ch_info = (struct rkmodule_channel_info *)arg;
 | 
						|
		ret = sc2310_get_channel_info(sc2310, ch_info);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		ret = -ENOIOCTLCMD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_COMPAT
 | 
						|
static long sc2310_compat_ioctl32(struct v4l2_subdev *sd,
 | 
						|
				  unsigned int cmd, unsigned long arg)
 | 
						|
{
 | 
						|
	void __user *up = compat_ptr(arg);
 | 
						|
	struct rkmodule_inf *inf;
 | 
						|
	struct rkmodule_awb_cfg *cfg;
 | 
						|
	struct rkmodule_hdr_cfg *hdr;
 | 
						|
	struct preisp_hdrae_exp_s *hdrae;
 | 
						|
	struct rkmodule_channel_info *ch_info;
 | 
						|
	long ret = 0;
 | 
						|
	u32 cg = 0;
 | 
						|
	u32 stream = 0;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case RKMODULE_GET_MODULE_INFO:
 | 
						|
		inf = kzalloc(sizeof(*inf), GFP_KERNEL);
 | 
						|
		if (!inf) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = sc2310_ioctl(sd, cmd, inf);
 | 
						|
		if (!ret) {
 | 
						|
			if (copy_to_user(up, inf, sizeof(*inf))) {
 | 
						|
				kfree(inf);
 | 
						|
				return -EFAULT;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		kfree(inf);
 | 
						|
		break;
 | 
						|
	case RKMODULE_AWB_CFG:
 | 
						|
		cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
 | 
						|
		if (!cfg) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		if (copy_from_user(cfg, up, sizeof(*cfg))) {
 | 
						|
			kfree(cfg);
 | 
						|
			return -EFAULT;
 | 
						|
		}
 | 
						|
		ret = sc2310_ioctl(sd, cmd, cfg);
 | 
						|
		kfree(cfg);
 | 
						|
		break;
 | 
						|
	case RKMODULE_GET_HDR_CFG:
 | 
						|
		hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
 | 
						|
		if (!hdr) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = sc2310_ioctl(sd, cmd, hdr);
 | 
						|
		if (!ret) {
 | 
						|
			if (copy_to_user(up, hdr, sizeof(*hdr))) {
 | 
						|
				kfree(hdr);
 | 
						|
				return -EFAULT;
 | 
						|
			}
 | 
						|
		}
 | 
						|
		kfree(hdr);
 | 
						|
		break;
 | 
						|
	case RKMODULE_SET_HDR_CFG:
 | 
						|
		hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
 | 
						|
		if (!hdr) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		if (copy_from_user(hdr, up, sizeof(*hdr))) {
 | 
						|
			kfree(hdr);
 | 
						|
			return -EFAULT;
 | 
						|
		}
 | 
						|
		ret = sc2310_ioctl(sd, cmd, hdr);
 | 
						|
		kfree(hdr);
 | 
						|
		break;
 | 
						|
	case PREISP_CMD_SET_HDRAE_EXP:
 | 
						|
		hdrae = kzalloc(sizeof(*hdrae), GFP_KERNEL);
 | 
						|
		if (!hdrae) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		if (copy_from_user(hdrae, up, sizeof(*hdrae))) {
 | 
						|
			kfree(hdrae);
 | 
						|
			return -EFAULT;
 | 
						|
		}
 | 
						|
		ret = sc2310_ioctl(sd, cmd, hdrae);
 | 
						|
		kfree(hdrae);
 | 
						|
		break;
 | 
						|
	case RKMODULE_SET_CONVERSION_GAIN:
 | 
						|
		if (copy_from_user(&cg, up, sizeof(cg)))
 | 
						|
			return -EFAULT;
 | 
						|
		ret = sc2310_ioctl(sd, cmd, &cg);
 | 
						|
		break;
 | 
						|
	case RKMODULE_SET_QUICK_STREAM:
 | 
						|
		if (copy_from_user(&stream, up, sizeof(u32)))
 | 
						|
			return -EFAULT;
 | 
						|
		ret = sc2310_ioctl(sd, cmd, &stream);
 | 
						|
		break;
 | 
						|
	case RKMODULE_GET_CHANNEL_INFO:
 | 
						|
		ch_info = kzalloc(sizeof(*ch_info), GFP_KERNEL);
 | 
						|
		if (!ch_info) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = sc2310_ioctl(sd, cmd, ch_info);
 | 
						|
		if (!ret) {
 | 
						|
			ret = copy_to_user(up, ch_info, sizeof(*ch_info));
 | 
						|
			if (ret)
 | 
						|
				ret = -EFAULT;
 | 
						|
		}
 | 
						|
		kfree(ch_info);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		ret = -ENOIOCTLCMD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static int __sc2310_start_stream(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = sc2310_write_array(sc2310->client, sc2310->cur_mode->reg_list);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = __v4l2_ctrl_handler_setup(&sc2310->ctrl_handler);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/* In case these controls are set before streaming */
 | 
						|
	if (sc2310->has_init_exp && sc2310->cur_mode->hdr_mode != NO_HDR) {
 | 
						|
		ret = sc2310_ioctl(&sc2310->subdev, PREISP_CMD_SET_HDRAE_EXP,
 | 
						|
			&sc2310->init_hdrae_exp);
 | 
						|
		if (ret) {
 | 
						|
			dev_err(&sc2310->client->dev,
 | 
						|
				"init exp fail in hdr mode\n");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return sc2310_write_reg(sc2310->client, SC2310_REG_CTRL_MODE,
 | 
						|
		SC2310_REG_VALUE_08BIT, SC2310_MODE_STREAMING);
 | 
						|
}
 | 
						|
 | 
						|
static int __sc2310_stop_stream(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	sc2310->has_init_exp = false;
 | 
						|
	return sc2310_write_reg(sc2310->client, SC2310_REG_CTRL_MODE,
 | 
						|
		SC2310_REG_VALUE_08BIT, SC2310_MODE_SW_STANDBY);
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_s_stream(struct v4l2_subdev *sd, int on)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	struct i2c_client *client = sc2310->client;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	mutex_lock(&sc2310->mutex);
 | 
						|
	on = !!on;
 | 
						|
	if (on == sc2310->streaming)
 | 
						|
		goto unlock_and_return;
 | 
						|
 | 
						|
	if (on) {
 | 
						|
		ret = pm_runtime_get_sync(&client->dev);
 | 
						|
		if (ret < 0) {
 | 
						|
			pm_runtime_put_noidle(&client->dev);
 | 
						|
			goto unlock_and_return;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = __sc2310_start_stream(sc2310);
 | 
						|
		if (ret) {
 | 
						|
			v4l2_err(sd, "start stream failed while write regs\n");
 | 
						|
			pm_runtime_put(&client->dev);
 | 
						|
			goto unlock_and_return;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		__sc2310_stop_stream(sc2310);
 | 
						|
		pm_runtime_put(&client->dev);
 | 
						|
	}
 | 
						|
 | 
						|
	sc2310->streaming = on;
 | 
						|
 | 
						|
unlock_and_return:
 | 
						|
	mutex_unlock(&sc2310->mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_s_power(struct v4l2_subdev *sd, int on)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	struct i2c_client *client = sc2310->client;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	mutex_lock(&sc2310->mutex);
 | 
						|
 | 
						|
	/* If the power state is not modified - no work to do. */
 | 
						|
	if (sc2310->power_on == !!on)
 | 
						|
		goto unlock_and_return;
 | 
						|
 | 
						|
	if (on) {
 | 
						|
		ret = pm_runtime_get_sync(&client->dev);
 | 
						|
		if (ret < 0) {
 | 
						|
			pm_runtime_put_noidle(&client->dev);
 | 
						|
			goto unlock_and_return;
 | 
						|
		}
 | 
						|
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
			SC2310_SOFTWARE_RESET_REG,
 | 
						|
			SC2310_REG_VALUE_08BIT,
 | 
						|
			0x01);
 | 
						|
		usleep_range(100, 200);
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
			0x303f,
 | 
						|
			SC2310_REG_VALUE_08BIT,
 | 
						|
			0x01);
 | 
						|
 | 
						|
		sc2310->power_on = true;
 | 
						|
	} else {
 | 
						|
		pm_runtime_put(&client->dev);
 | 
						|
		sc2310->power_on = false;
 | 
						|
	}
 | 
						|
 | 
						|
unlock_and_return:
 | 
						|
	mutex_unlock(&sc2310->mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int __sc2310_power_on(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct device *dev = &sc2310->client->dev;
 | 
						|
 | 
						|
	if (!IS_ERR_OR_NULL(sc2310->pins_default)) {
 | 
						|
		ret = pinctrl_select_state(sc2310->pinctrl,
 | 
						|
					   sc2310->pins_default);
 | 
						|
		if (ret < 0)
 | 
						|
			dev_err(dev, "could not set pins\n");
 | 
						|
	}
 | 
						|
	ret = clk_set_rate(sc2310->xvclk, SC2310_XVCLK_FREQ);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_warn(dev, "Failed to set xvclk rate (24MHz)\n");
 | 
						|
	if (clk_get_rate(sc2310->xvclk) != SC2310_XVCLK_FREQ)
 | 
						|
		dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
 | 
						|
	ret = clk_prepare_enable(sc2310->xvclk);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(dev, "Failed to enable xvclk\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
	if (!IS_ERR(sc2310->reset_gpio))
 | 
						|
		gpiod_set_value_cansleep(sc2310->reset_gpio, 1);
 | 
						|
 | 
						|
	ret = regulator_bulk_enable(SC2310_NUM_SUPPLIES, sc2310->supplies);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(dev, "Failed to enable regulators\n");
 | 
						|
		goto disable_clk;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!IS_ERR(sc2310->reset_gpio))
 | 
						|
		gpiod_set_value_cansleep(sc2310->reset_gpio, 0);
 | 
						|
 | 
						|
	usleep_range(500, 1000);
 | 
						|
	if (!IS_ERR(sc2310->pwdn_gpio))
 | 
						|
		gpiod_set_value_cansleep(sc2310->pwdn_gpio, 0);
 | 
						|
	usleep_range(2000, 4000);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
disable_clk:
 | 
						|
	clk_disable_unprepare(sc2310->xvclk);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void __sc2310_power_off(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct device *dev = &sc2310->client->dev;
 | 
						|
 | 
						|
	if (!IS_ERR(sc2310->pwdn_gpio))
 | 
						|
		gpiod_set_value_cansleep(sc2310->pwdn_gpio, 1);
 | 
						|
	clk_disable_unprepare(sc2310->xvclk);
 | 
						|
	if (!IS_ERR(sc2310->reset_gpio))
 | 
						|
		gpiod_set_value_cansleep(sc2310->reset_gpio, 1);
 | 
						|
	if (!IS_ERR_OR_NULL(sc2310->pins_sleep)) {
 | 
						|
		ret = pinctrl_select_state(sc2310->pinctrl,
 | 
						|
					   sc2310->pins_sleep);
 | 
						|
		if (ret < 0)
 | 
						|
			dev_dbg(dev, "could not set pins\n");
 | 
						|
	}
 | 
						|
	regulator_bulk_disable(SC2310_NUM_SUPPLIES, sc2310->supplies);
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_runtime_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	return __sc2310_power_on(sc2310);
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_runtime_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	__sc2310_power_off(sc2310);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
 | 
						|
static int sc2310_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
	struct v4l2_mbus_framefmt *try_fmt =
 | 
						|
				v4l2_subdev_get_try_format(sd, fh->state, 0);
 | 
						|
	const struct sc2310_mode *def_mode = &supported_modes[0];
 | 
						|
 | 
						|
	mutex_lock(&sc2310->mutex);
 | 
						|
	/* Initialize try_fmt */
 | 
						|
	try_fmt->width = def_mode->width;
 | 
						|
	try_fmt->height = def_mode->height;
 | 
						|
	try_fmt->code = def_mode->bus_fmt;
 | 
						|
	try_fmt->field = V4L2_FIELD_NONE;
 | 
						|
 | 
						|
	mutex_unlock(&sc2310->mutex);
 | 
						|
	/* No crop or compose */
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static int sc2310_enum_frame_interval(struct v4l2_subdev *sd,
 | 
						|
				       struct v4l2_subdev_state *sd_state,
 | 
						|
				       struct v4l2_subdev_frame_interval_enum *fie)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	if (fie->index >= sc2310->cfg_num)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	fie->code = supported_modes[fie->index].bus_fmt;
 | 
						|
	fie->width = supported_modes[fie->index].width;
 | 
						|
	fie->height = supported_modes[fie->index].height;
 | 
						|
	fie->interval = supported_modes[fie->index].max_fps;
 | 
						|
	fie->reserved[0] = supported_modes[fie->index].hdr_mode;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct dev_pm_ops sc2310_pm_ops = {
 | 
						|
	SET_RUNTIME_PM_OPS(sc2310_runtime_suspend,
 | 
						|
			   sc2310_runtime_resume, NULL)
 | 
						|
};
 | 
						|
 | 
						|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
 | 
						|
static const struct v4l2_subdev_internal_ops sc2310_internal_ops = {
 | 
						|
	.open = sc2310_open,
 | 
						|
};
 | 
						|
#endif
 | 
						|
 | 
						|
static const struct v4l2_subdev_core_ops sc2310_core_ops = {
 | 
						|
	.s_power = sc2310_s_power,
 | 
						|
	.ioctl = sc2310_ioctl,
 | 
						|
#ifdef CONFIG_COMPAT
 | 
						|
	.compat_ioctl32 = sc2310_compat_ioctl32,
 | 
						|
#endif
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_video_ops sc2310_video_ops = {
 | 
						|
	.s_stream = sc2310_s_stream,
 | 
						|
	.g_frame_interval = sc2310_g_frame_interval,
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_pad_ops sc2310_pad_ops = {
 | 
						|
	.enum_mbus_code = sc2310_enum_mbus_code,
 | 
						|
	.enum_frame_size = sc2310_enum_frame_sizes,
 | 
						|
	.enum_frame_interval = sc2310_enum_frame_interval,
 | 
						|
	.get_fmt = sc2310_get_fmt,
 | 
						|
	.set_fmt = sc2310_set_fmt,
 | 
						|
	.get_mbus_config = sc2310_g_mbus_config,
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_ops sc2310_subdev_ops = {
 | 
						|
	.core	= &sc2310_core_ops,   /* v4l2_subdev_core_ops sc2310_core_ops */
 | 
						|
	.video	= &sc2310_video_ops,  /* */
 | 
						|
	.pad	= &sc2310_pad_ops,    /* */
 | 
						|
};
 | 
						|
 | 
						|
static void sc2310_modify_fps_info(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	const struct sc2310_mode *mode = sc2310->cur_mode;
 | 
						|
 | 
						|
	sc2310->cur_fps.denominator = mode->max_fps.denominator * mode->vts_def /
 | 
						|
				      sc2310->cur_vts;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_set_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	struct sc2310 *sc2310 = container_of(ctrl->handler,
 | 
						|
					     struct sc2310, ctrl_handler);
 | 
						|
	struct i2c_client *client = sc2310->client;
 | 
						|
	s64 max;
 | 
						|
	u32 again, again_fine, dgain, dgain_fine;
 | 
						|
	int ret = 0;
 | 
						|
	u32 val;
 | 
						|
 | 
						|
	/* Propagate change of current control to all related controls */
 | 
						|
	switch (ctrl->id) {
 | 
						|
	case V4L2_CID_VBLANK:
 | 
						|
		/* Update max exposure while meeting expected vblanking */
 | 
						|
		max = sc2310->cur_mode->height + ctrl->val - 3;
 | 
						|
		__v4l2_ctrl_modify_range(sc2310->exposure,
 | 
						|
					 sc2310->exposure->minimum, max,
 | 
						|
					 sc2310->exposure->step,
 | 
						|
					 sc2310->exposure->default_value);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!pm_runtime_get_if_in_use(&client->dev))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	switch (ctrl->id) {
 | 
						|
	case V4L2_CID_EXPOSURE:
 | 
						|
		if (sc2310->cur_mode->hdr_mode != NO_HDR)
 | 
						|
			goto out_ctrl;
 | 
						|
		val = ctrl->val << 1;
 | 
						|
		ret = sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_L,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(val << 4 & 0XF0));
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_M,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(val >> 4 & 0XFF));
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_EXP_LONG_H,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					(val >> 12 & 0X0F));
 | 
						|
		dev_dbg(&client->dev, "set exposure 0x%x\n", val);
 | 
						|
		break;
 | 
						|
 | 
						|
	case V4L2_CID_ANALOGUE_GAIN:
 | 
						|
		if (sc2310->cur_mode->hdr_mode != NO_HDR)
 | 
						|
			goto out_ctrl;
 | 
						|
		sc2310_get_gain_reg(ctrl->val, &again, &again_fine, &dgain, &dgain_fine);
 | 
						|
		dev_dbg(&client->dev, "recv:%d set again 0x%x, again_fine 0x%x, set dgain 0x%x, dgain_fine 0x%x\n",
 | 
						|
			ctrl->val, again, again_fine, dgain, dgain_fine);
 | 
						|
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_AGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					again);
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_AGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					again_fine);
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_DGAIN,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					dgain);
 | 
						|
		ret |= sc2310_write_reg(sc2310->client,
 | 
						|
					SC2310_REG_DGAIN_FINE,
 | 
						|
					SC2310_REG_VALUE_08BIT,
 | 
						|
					dgain_fine);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_VBLANK:
 | 
						|
		ret = sc2310_write_reg(sc2310->client, SC2310_REG_VTS,
 | 
						|
					SC2310_REG_VALUE_16BIT,
 | 
						|
					ctrl->val + sc2310->cur_mode->height);
 | 
						|
		if (!ret)
 | 
						|
			sc2310->cur_vts = ctrl->val + sc2310->cur_mode->height;
 | 
						|
		sc2310_modify_fps_info(sc2310);
 | 
						|
		dev_dbg(&client->dev, "set vblank 0x%x\n",
 | 
						|
			ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_TEST_PATTERN:
 | 
						|
		ret = sc2310_enable_test_pattern(sc2310, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_HFLIP:
 | 
						|
		ret = sc2310_read_reg(sc2310->client, SC2310_FLIP_REG,
 | 
						|
				      SC2310_REG_VALUE_08BIT, &val);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
		if (ctrl->val)
 | 
						|
			val |= SC2310_MIRROR_MASK;
 | 
						|
		else
 | 
						|
			val &= ~SC2310_MIRROR_MASK;
 | 
						|
		ret |= sc2310_write_reg(sc2310->client, SC2310_FLIP_REG,
 | 
						|
					SC2310_REG_VALUE_08BIT, val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_VFLIP:
 | 
						|
		ret = sc2310_read_reg(sc2310->client, SC2310_FLIP_REG,
 | 
						|
				      SC2310_REG_VALUE_08BIT, &val);
 | 
						|
		if (ret)
 | 
						|
			break;
 | 
						|
		if (ctrl->val)
 | 
						|
			val |= SC2310_FLIP_MASK;
 | 
						|
		else
 | 
						|
			val &= ~SC2310_FLIP_MASK;
 | 
						|
		ret |= sc2310_write_reg(sc2310->client, SC2310_FLIP_REG,
 | 
						|
					SC2310_REG_VALUE_08BIT, val);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
 | 
						|
			 __func__, ctrl->id, ctrl->val);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
out_ctrl:
 | 
						|
	pm_runtime_put(&client->dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_ctrl_ops sc2310_ctrl_ops = {
 | 
						|
	.s_ctrl = sc2310_set_ctrl,
 | 
						|
};
 | 
						|
 | 
						|
static int sc2310_initialize_controls(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	const struct sc2310_mode *mode;
 | 
						|
	struct v4l2_ctrl_handler *handler;
 | 
						|
	s64 exposure_max, vblank_def;
 | 
						|
	u32 h_blank;
 | 
						|
	int ret;
 | 
						|
	u64 pixel_rate = 0;
 | 
						|
 | 
						|
	handler = &sc2310->ctrl_handler;
 | 
						|
	mode = sc2310->cur_mode;
 | 
						|
	ret = v4l2_ctrl_handler_init(handler, 9);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
	handler->lock = &sc2310->mutex;
 | 
						|
 | 
						|
	sc2310->link_freq = v4l2_ctrl_new_int_menu(handler, NULL,
 | 
						|
			V4L2_CID_LINK_FREQ,
 | 
						|
			ARRAY_SIZE(link_freq_items) - 1, 0,
 | 
						|
			link_freq_items);
 | 
						|
	__v4l2_ctrl_s_ctrl(sc2310->link_freq, mode->mipi_freq_idx);
 | 
						|
 | 
						|
	/* pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */
 | 
						|
	pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] / mode->bpp * 2 * SC2310_LANES;
 | 
						|
	sc2310->pixel_rate = v4l2_ctrl_new_std(handler, NULL,
 | 
						|
		V4L2_CID_PIXEL_RATE, 0, SC2310_MAX_PIXEL_RATE,
 | 
						|
		1, pixel_rate);
 | 
						|
 | 
						|
	h_blank = mode->hts_def - mode->width;
 | 
						|
	sc2310->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
 | 
						|
				h_blank, h_blank, 1, h_blank);
 | 
						|
	if (sc2310->hblank)
 | 
						|
		sc2310->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 | 
						|
 | 
						|
	vblank_def = mode->vts_def - mode->height;
 | 
						|
	sc2310->vblank = v4l2_ctrl_new_std(handler, &sc2310_ctrl_ops,
 | 
						|
				V4L2_CID_VBLANK, vblank_def,
 | 
						|
				SC2310_VTS_MAX - mode->height,
 | 
						|
				1, vblank_def);
 | 
						|
 | 
						|
	exposure_max = mode->vts_def - 3;
 | 
						|
	sc2310->exposure = v4l2_ctrl_new_std(handler, &sc2310_ctrl_ops,
 | 
						|
				V4L2_CID_EXPOSURE, SC2310_EXPOSURE_MIN,
 | 
						|
				exposure_max, SC2310_EXPOSURE_STEP,
 | 
						|
				mode->exp_def);
 | 
						|
 | 
						|
	sc2310->anal_gain = v4l2_ctrl_new_std(handler, &sc2310_ctrl_ops,
 | 
						|
				V4L2_CID_ANALOGUE_GAIN, SC2310_GAIN_MIN,
 | 
						|
				SC2310_GAIN_MAX, SC2310_GAIN_STEP,
 | 
						|
				SC2310_GAIN_DEFAULT);
 | 
						|
 | 
						|
	sc2310->test_pattern = v4l2_ctrl_new_std_menu_items(handler,
 | 
						|
				&sc2310_ctrl_ops, V4L2_CID_TEST_PATTERN,
 | 
						|
				ARRAY_SIZE(sc2310_test_pattern_menu) - 1,
 | 
						|
				0, 0, sc2310_test_pattern_menu);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(handler, &sc2310_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
 | 
						|
	v4l2_ctrl_new_std(handler, &sc2310_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
 | 
						|
 | 
						|
	if (handler->error) {
 | 
						|
		ret = handler->error;
 | 
						|
		dev_err(&sc2310->client->dev,
 | 
						|
			"Failed to init controls(%d)\n", ret);
 | 
						|
		goto err_free_handler;
 | 
						|
	}
 | 
						|
 | 
						|
	sc2310->subdev.ctrl_handler = handler;
 | 
						|
	sc2310->has_init_exp = false;
 | 
						|
	sc2310->cur_fps = mode->max_fps;
 | 
						|
	sc2310->cur_vts = mode->vts_def;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_free_handler:
 | 
						|
	v4l2_ctrl_handler_free(handler);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_check_sensor_id(struct sc2310 *sc2310,
 | 
						|
				  struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct device *dev = &sc2310->client->dev;
 | 
						|
	u32 id = 0;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = sc2310_read_reg(client, SC2310_REG_CHIP_ID,
 | 
						|
		SC2310_REG_VALUE_16BIT, &id);
 | 
						|
	if (id != CHIP_ID) {
 | 
						|
		dev_err(dev, "Unexpected sensor id(%04x), ret(%d)\n", id, ret);
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_info(dev, "Detected SC%04x sensor\n", CHIP_ID);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_configure_regulators(struct sc2310 *sc2310)
 | 
						|
{
 | 
						|
	unsigned int i;
 | 
						|
 | 
						|
	for (i = 0; i < SC2310_NUM_SUPPLIES; i++)
 | 
						|
		sc2310->supplies[i].supply = sc2310_supply_names[i];
 | 
						|
 | 
						|
	return devm_regulator_bulk_get(&sc2310->client->dev,
 | 
						|
				       SC2310_NUM_SUPPLIES,
 | 
						|
				       sc2310->supplies);
 | 
						|
}
 | 
						|
 | 
						|
static int sc2310_probe(struct i2c_client *client,
 | 
						|
			const struct i2c_device_id *id)
 | 
						|
{
 | 
						|
	struct device *dev = &client->dev;
 | 
						|
	struct device_node *node = dev->of_node;
 | 
						|
	struct sc2310 *sc2310;
 | 
						|
	struct v4l2_subdev *sd;
 | 
						|
	char facing[2];
 | 
						|
	int ret;
 | 
						|
	u32 i, hdr_mode = 0;
 | 
						|
 | 
						|
	dev_info(dev, "driver version: %02x.%02x.%02x",
 | 
						|
		DRIVER_VERSION >> 16,
 | 
						|
		(DRIVER_VERSION & 0xff00) >> 8,
 | 
						|
		DRIVER_VERSION & 0x00ff);
 | 
						|
 | 
						|
	sc2310 = devm_kzalloc(dev, sizeof(*sc2310), GFP_KERNEL);
 | 
						|
	if (!sc2310)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
 | 
						|
				   &sc2310->module_index);
 | 
						|
	ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
 | 
						|
				       &sc2310->module_facing);
 | 
						|
	ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
 | 
						|
				       &sc2310->module_name);
 | 
						|
	ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
 | 
						|
				       &sc2310->len_name);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "could not get module information!\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = of_property_read_u32(node, OF_CAMERA_HDR_MODE,
 | 
						|
			&hdr_mode);
 | 
						|
 | 
						|
	if (ret) {
 | 
						|
		hdr_mode = NO_HDR;
 | 
						|
		dev_warn(dev, " Get hdr mode failed! no hdr default\n");
 | 
						|
	}
 | 
						|
 | 
						|
	sc2310->cfg_num = ARRAY_SIZE(supported_modes);
 | 
						|
	for (i = 0; i < sc2310->cfg_num; i++) {
 | 
						|
		if (hdr_mode == supported_modes[i].hdr_mode) {
 | 
						|
			sc2310->cur_mode = &supported_modes[i];
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	sc2310->client = client;
 | 
						|
 | 
						|
	sc2310->xvclk = devm_clk_get(dev, "xvclk");
 | 
						|
	if (IS_ERR(sc2310->xvclk)) {
 | 
						|
		dev_err(dev, "Failed to get xvclk\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	sc2310->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(sc2310->reset_gpio))
 | 
						|
		dev_warn(dev, "Failed to get reset-gpios\n");
 | 
						|
 | 
						|
	sc2310->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(sc2310->pwdn_gpio))
 | 
						|
		dev_warn(dev, "Failed to get pwdn-gpios\n");
 | 
						|
 | 
						|
	sc2310->pinctrl = devm_pinctrl_get(dev);
 | 
						|
	if (!IS_ERR(sc2310->pinctrl)) {
 | 
						|
		sc2310->pins_default =
 | 
						|
			pinctrl_lookup_state(sc2310->pinctrl,
 | 
						|
					     OF_CAMERA_PINCTRL_STATE_DEFAULT);
 | 
						|
		if (IS_ERR(sc2310->pins_default))
 | 
						|
			dev_err(dev, "could not get default pinstate\n");
 | 
						|
 | 
						|
		sc2310->pins_sleep =
 | 
						|
			pinctrl_lookup_state(sc2310->pinctrl,
 | 
						|
					     OF_CAMERA_PINCTRL_STATE_SLEEP);
 | 
						|
		if (IS_ERR(sc2310->pins_sleep))
 | 
						|
			dev_err(dev, "could not get sleep pinstate\n");
 | 
						|
	} else {
 | 
						|
		dev_err(dev, "no pinctrl\n");
 | 
						|
	}
 | 
						|
 | 
						|
	ret = sc2310_configure_regulators(sc2310);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "Failed to get power regulators\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_init(&sc2310->mutex);
 | 
						|
 | 
						|
	sd = &sc2310->subdev;
 | 
						|
	v4l2_i2c_subdev_init(sd, client, &sc2310_subdev_ops);
 | 
						|
	ret = sc2310_initialize_controls(sc2310);
 | 
						|
	if (ret)
 | 
						|
		goto err_destroy_mutex;
 | 
						|
 | 
						|
	ret = __sc2310_power_on(sc2310);
 | 
						|
	if (ret)
 | 
						|
		goto err_free_handler;
 | 
						|
 | 
						|
	ret = sc2310_check_sensor_id(sc2310, client);
 | 
						|
	if (ret)
 | 
						|
		goto err_power_off;
 | 
						|
 | 
						|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
 | 
						|
	sd->internal_ops = &sc2310_internal_ops;
 | 
						|
	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 | 
						|
#endif
 | 
						|
#if defined(CONFIG_MEDIA_CONTROLLER)
 | 
						|
	sc2310->pad.flags = MEDIA_PAD_FL_SOURCE;
 | 
						|
	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
 | 
						|
	ret = media_entity_pads_init(&sd->entity, 1, &sc2310->pad);
 | 
						|
	if (ret < 0)
 | 
						|
		goto err_power_off;
 | 
						|
#endif
 | 
						|
 | 
						|
	memset(facing, 0, sizeof(facing));
 | 
						|
	if (strcmp(sc2310->module_facing, "back") == 0)
 | 
						|
		facing[0] = 'b';
 | 
						|
	else
 | 
						|
		facing[0] = 'f';
 | 
						|
 | 
						|
	snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
 | 
						|
		 sc2310->module_index, facing,
 | 
						|
		 SC2310_NAME, dev_name(sd->dev));
 | 
						|
	ret = v4l2_async_register_subdev_sensor(sd);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "v4l2 async register subdev failed\n");
 | 
						|
		goto err_clean_entity;
 | 
						|
	}
 | 
						|
 | 
						|
	pm_runtime_set_active(dev);
 | 
						|
	pm_runtime_enable(dev);
 | 
						|
	pm_runtime_idle(dev);
 | 
						|
#ifdef USED_SYS_DEBUG
 | 
						|
	add_sysfs_interfaces(dev);
 | 
						|
#endif
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_clean_entity:
 | 
						|
#if defined(CONFIG_MEDIA_CONTROLLER)
 | 
						|
	media_entity_cleanup(&sd->entity);
 | 
						|
#endif
 | 
						|
err_power_off:
 | 
						|
	__sc2310_power_off(sc2310);
 | 
						|
err_free_handler:
 | 
						|
	v4l2_ctrl_handler_free(&sc2310->ctrl_handler);
 | 
						|
err_destroy_mutex:
 | 
						|
	mutex_destroy(&sc2310->mutex);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void sc2310_remove(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | 
						|
	struct sc2310 *sc2310 = to_sc2310(sd);
 | 
						|
 | 
						|
	v4l2_async_unregister_subdev(sd);
 | 
						|
#if defined(CONFIG_MEDIA_CONTROLLER)
 | 
						|
	media_entity_cleanup(&sd->entity);
 | 
						|
#endif
 | 
						|
	v4l2_ctrl_handler_free(&sc2310->ctrl_handler);
 | 
						|
	mutex_destroy(&sc2310->mutex);
 | 
						|
 | 
						|
	pm_runtime_disable(&client->dev);
 | 
						|
	if (!pm_runtime_status_suspended(&client->dev))
 | 
						|
		__sc2310_power_off(sc2310);
 | 
						|
	pm_runtime_set_suspended(&client->dev);
 | 
						|
}
 | 
						|
 | 
						|
#if IS_ENABLED(CONFIG_OF)
 | 
						|
static const struct of_device_id sc2310_of_match[] = {
 | 
						|
	{ .compatible = "smartsens,sc2310" },
 | 
						|
	{ },
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, sc2310_of_match);
 | 
						|
#endif
 | 
						|
 | 
						|
static const struct i2c_device_id sc2310_match_id[] = {
 | 
						|
	{ "smartsens,sc2310", 0 },
 | 
						|
	{ },
 | 
						|
};
 | 
						|
 | 
						|
static struct i2c_driver sc2310_i2c_driver = {
 | 
						|
	.driver = {
 | 
						|
		.name = SC2310_NAME,
 | 
						|
		.pm = &sc2310_pm_ops,
 | 
						|
		.of_match_table = of_match_ptr(sc2310_of_match),
 | 
						|
	},
 | 
						|
	.probe		= &sc2310_probe,
 | 
						|
	.remove		= &sc2310_remove,
 | 
						|
	.id_table	= sc2310_match_id,
 | 
						|
};
 | 
						|
 | 
						|
#ifdef CONFIG_ROCKCHIP_THUNDER_BOOT
 | 
						|
module_i2c_driver(sc2310_i2c_driver);
 | 
						|
#else
 | 
						|
static int __init sensor_mod_init(void)
 | 
						|
{
 | 
						|
	return i2c_add_driver(&sc2310_i2c_driver);
 | 
						|
}
 | 
						|
 | 
						|
static void __exit sensor_mod_exit(void)
 | 
						|
{
 | 
						|
	i2c_del_driver(&sc2310_i2c_driver);
 | 
						|
}
 | 
						|
 | 
						|
device_initcall_sync(sensor_mod_init);
 | 
						|
module_exit(sensor_mod_exit);
 | 
						|
#endif
 | 
						|
 | 
						|
MODULE_DESCRIPTION("Smartsens sc2310 sensor driver");
 | 
						|
MODULE_LICENSE("GPL v2");
 |