1707 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1707 lines
		
	
	
		
			39 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0
 | 
						|
/*
 | 
						|
 * A V4L2 driver for OmniVision OV5647 cameras.
 | 
						|
 *
 | 
						|
 * Based on Samsung S5K6AAFX SXGA 1/6" 1.3M CMOS Image Sensor driver
 | 
						|
 * Copyright (C) 2011 Sylwester Nawrocki <s.nawrocki@samsung.com>
 | 
						|
 *
 | 
						|
 * Based on Omnivision OV7670 Camera Driver
 | 
						|
 * Copyright (C) 2006-7 Jonathan Corbet <corbet@lwn.net>
 | 
						|
 *
 | 
						|
 * Copyright (C) 2016, Synopsys, Inc.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/init.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/of_graph.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/regulator/consumer.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/videodev2.h>
 | 
						|
#include <linux/version.h>
 | 
						|
#include <linux/rk-camera-module.h>
 | 
						|
#include <media/v4l2-ctrls.h>
 | 
						|
#include <media/v4l2-device.h>
 | 
						|
#include <media/v4l2-event.h>
 | 
						|
#include <media/v4l2-fwnode.h>
 | 
						|
#include <media/v4l2-image-sizes.h>
 | 
						|
#include <media/v4l2-mediabus.h>
 | 
						|
 | 
						|
#define DRIVER_VERSION			KERNEL_VERSION(0, 0x01, 0x1)
 | 
						|
 | 
						|
/*
 | 
						|
 * From the datasheet, "20ms after PWDN goes low or 20ms after RESETB goes
 | 
						|
 * high if reset is inserted after PWDN goes high, host can access sensor's
 | 
						|
 * SCCB to initialize sensor."
 | 
						|
 */
 | 
						|
#define PWDN_ACTIVE_DELAY_MS	500
 | 
						|
#define OV5647_LANES  2
 | 
						|
 | 
						|
#define MIPI_CTRL00_CLOCK_LANE_GATE		BIT(5)
 | 
						|
#define MIPI_CTRL00_LINE_SYNC_ENABLE		BIT(4)
 | 
						|
#define MIPI_CTRL00_BUS_IDLE			BIT(2)
 | 
						|
#define MIPI_CTRL00_CLOCK_LANE_DISABLE		BIT(0)
 | 
						|
 | 
						|
#define OV5647_SW_STANDBY		0x0100
 | 
						|
#define OV5647_SW_RESET			0x0103
 | 
						|
#define OV5647_REG_CHIPID_H		0x300a
 | 
						|
#define OV5647_REG_CHIPID_L		0x300b
 | 
						|
#define OV5640_REG_PAD_OUT		0x300d
 | 
						|
#define OV5647_REG_EXP_HI		0x3500
 | 
						|
#define OV5647_REG_EXP_MID		0x3501
 | 
						|
#define OV5647_REG_EXP_LO		0x3502
 | 
						|
#define OV5647_REG_AEC_AGC		0x3503
 | 
						|
#define OV5647_REG_GAIN_HI		0x350a
 | 
						|
#define OV5647_REG_GAIN_LO		0x350b
 | 
						|
#define OV5647_REG_VTS_HI		0x380e
 | 
						|
#define OV5647_REG_VTS_LO		0x380f
 | 
						|
#define OV5647_REG_VFLIP		0x3820
 | 
						|
#define OV5647_REG_HFLIP		0x3821
 | 
						|
#define OV5647_REG_FRAME_OFF_NUMBER	0x4202
 | 
						|
#define OV5647_REG_MIPI_CTRL00		0x4800
 | 
						|
#define OV5647_REG_MIPI_CTRL14		0x4814
 | 
						|
#define OV5647_REG_AWB			0x5001
 | 
						|
 | 
						|
#define REG_TERM 0xfffe
 | 
						|
#define VAL_TERM 0xfe
 | 
						|
#define REG_DLY  0xffff
 | 
						|
 | 
						|
/* OV5647 native and active pixel array size */
 | 
						|
#define OV5647_NATIVE_WIDTH		2624U
 | 
						|
#define OV5647_NATIVE_HEIGHT		1956U
 | 
						|
 | 
						|
#define OV5647_PIXEL_ARRAY_LEFT		16U
 | 
						|
#define OV5647_PIXEL_ARRAY_TOP		6U
 | 
						|
#define OV5647_PIXEL_ARRAY_WIDTH	2592U
 | 
						|
#define OV5647_PIXEL_ARRAY_HEIGHT	1944U
 | 
						|
 | 
						|
#define OV5647_VBLANK_MIN		24
 | 
						|
#define OV5647_VTS_MAX			32767
 | 
						|
 | 
						|
#define OV5647_EXPOSURE_MIN		4
 | 
						|
#define OV5647_EXPOSURE_STEP		1
 | 
						|
#define OV5647_EXPOSURE_DEFAULT		1000
 | 
						|
#define OV5647_EXPOSURE_MAX		65535
 | 
						|
 | 
						|
#define OV5647_NAME			"ov5647"
 | 
						|
 | 
						|
struct regval_list {
 | 
						|
	u16 addr;
 | 
						|
	u8 data;
 | 
						|
};
 | 
						|
 | 
						|
struct ov5647_mode {
 | 
						|
	struct v4l2_mbus_framefmt	format;
 | 
						|
	struct v4l2_fract max_fps;
 | 
						|
	struct v4l2_rect		crop;
 | 
						|
	u64				pixel_rate;
 | 
						|
	int				hts;
 | 
						|
	int				vts;
 | 
						|
	int				link_freq_index;
 | 
						|
	const struct regval_list	*reg_list;
 | 
						|
	unsigned int			num_regs;
 | 
						|
};
 | 
						|
 | 
						|
struct ov5647 {
 | 
						|
	struct v4l2_subdev		sd;
 | 
						|
	struct media_pad		pad;
 | 
						|
	struct mutex			lock;
 | 
						|
	struct clk			*xclk;
 | 
						|
	struct gpio_desc		*pwdn;
 | 
						|
	struct gpio_desc		*reset;
 | 
						|
	bool				clock_ncont;
 | 
						|
	struct v4l2_ctrl_handler	ctrls;
 | 
						|
	const struct ov5647_mode	*mode;
 | 
						|
	struct v4l2_ctrl		*pixel_rate;
 | 
						|
	struct v4l2_ctrl		*hblank;
 | 
						|
	struct v4l2_ctrl		*vblank;
 | 
						|
	struct v4l2_ctrl		*exposure;
 | 
						|
	struct v4l2_ctrl		*hflip;
 | 
						|
	struct v4l2_ctrl		*vflip;
 | 
						|
	struct v4l2_ctrl		*link_freq;
 | 
						|
	bool				streaming;
 | 
						|
	u32			module_index;
 | 
						|
	const char		*module_facing;
 | 
						|
	const char		*module_name;
 | 
						|
	const char		*len_name;
 | 
						|
};
 | 
						|
 | 
						|
static inline struct ov5647 *to_sensor(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	return container_of(sd, struct ov5647, sd);
 | 
						|
}
 | 
						|
 | 
						|
static const struct regval_list sensor_oe_disable_regs[] = {
 | 
						|
	{0x3000, 0x00},
 | 
						|
	{0x3001, 0x00},
 | 
						|
	{0x3002, 0x00},
 | 
						|
};
 | 
						|
 | 
						|
static const struct regval_list sensor_oe_enable_regs[] = {
 | 
						|
	{0x3000, 0x0f},
 | 
						|
	{0x3001, 0xff},
 | 
						|
	{0x3002, 0xe4},
 | 
						|
};
 | 
						|
 | 
						|
static struct regval_list ov5647_2592x1944_10bpp[] = {
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x0103, 0x01},
 | 
						|
	{0x3034, 0x1a},
 | 
						|
	{0x3035, 0x21},
 | 
						|
	{0x3036, 0x69},
 | 
						|
	{0x303c, 0x11},
 | 
						|
	{0x3106, 0xf5},
 | 
						|
	{0x3821, 0x00},
 | 
						|
	{0x3820, 0x00},
 | 
						|
	{0x3827, 0xec},
 | 
						|
	{0x370c, 0x03},
 | 
						|
	{0x3612, 0x5b},
 | 
						|
	{0x3618, 0x04},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5002, 0x41},
 | 
						|
	{0x5003, 0x08},
 | 
						|
	{0x5a00, 0x08},
 | 
						|
	{0x3000, 0x00},
 | 
						|
	{0x3001, 0x00},
 | 
						|
	{0x3002, 0x00},
 | 
						|
	{0x3016, 0x08},
 | 
						|
	{0x3017, 0xe0},
 | 
						|
	{0x3018, 0x44},
 | 
						|
	{0x301c, 0xf8},
 | 
						|
	{0x301d, 0xf0},
 | 
						|
	{0x3a18, 0x00},
 | 
						|
	{0x3a19, 0xf8},
 | 
						|
	{0x3c01, 0x80},
 | 
						|
	{0x3b07, 0x0c},
 | 
						|
	{0x380c, 0x0b},
 | 
						|
	{0x380d, 0x1c},
 | 
						|
	{0x3814, 0x11},
 | 
						|
	{0x3815, 0x11},
 | 
						|
	{0x3708, 0x64},
 | 
						|
	{0x3709, 0x12},
 | 
						|
	{0x3808, 0x0a},
 | 
						|
	{0x3809, 0x20},
 | 
						|
	{0x380a, 0x07},
 | 
						|
	{0x380b, 0x98},
 | 
						|
	{0x3800, 0x00},
 | 
						|
	{0x3801, 0x00},
 | 
						|
	{0x3802, 0x00},
 | 
						|
	{0x3803, 0x00},
 | 
						|
	{0x3804, 0x0a},
 | 
						|
	{0x3805, 0x3f},
 | 
						|
	{0x3806, 0x07},
 | 
						|
	{0x3807, 0xa3},
 | 
						|
	{0x3811, 0x10},
 | 
						|
	{0x3813, 0x06},
 | 
						|
	{0x3630, 0x2e},
 | 
						|
	{0x3632, 0xe2},
 | 
						|
	{0x3633, 0x23},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x3636, 0x06},
 | 
						|
	{0x3620, 0x64},
 | 
						|
	{0x3621, 0xe0},
 | 
						|
	{0x3600, 0x37},
 | 
						|
	{0x3704, 0xa0},
 | 
						|
	{0x3703, 0x5a},
 | 
						|
	{0x3715, 0x78},
 | 
						|
	{0x3717, 0x01},
 | 
						|
	{0x3731, 0x02},
 | 
						|
	{0x370b, 0x60},
 | 
						|
	{0x3705, 0x1a},
 | 
						|
	{0x3f05, 0x02},
 | 
						|
	{0x3f06, 0x10},
 | 
						|
	{0x3f01, 0x0a},
 | 
						|
	{0x3a08, 0x01},
 | 
						|
	{0x3a09, 0x28},
 | 
						|
	{0x3a0a, 0x00},
 | 
						|
	{0x3a0b, 0xf6},
 | 
						|
	{0x3a0d, 0x08},
 | 
						|
	{0x3a0e, 0x06},
 | 
						|
	{0x3a0f, 0x58},
 | 
						|
	{0x3a10, 0x50},
 | 
						|
	{0x3a1b, 0x58},
 | 
						|
	{0x3a1e, 0x50},
 | 
						|
	{0x3a11, 0x60},
 | 
						|
	{0x3a1f, 0x28},
 | 
						|
	{0x4001, 0x02},
 | 
						|
	{0x4004, 0x04},
 | 
						|
	{0x4000, 0x09},
 | 
						|
	{0x4837, 0x19},
 | 
						|
	{0x4800, 0x24},
 | 
						|
	{0x3503, 0x03},
 | 
						|
	{0x0100, 0x01},
 | 
						|
};
 | 
						|
 | 
						|
static struct regval_list ov5647_1080p30_10bpp[] = {
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x0103, 0x01},
 | 
						|
	{0x3034, 0x1a},
 | 
						|
	{0x3035, 0x21},
 | 
						|
	{0x3036, 0x62},
 | 
						|
	{0x303c, 0x11},
 | 
						|
	{0x3106, 0xf5},
 | 
						|
	{0x3821, 0x00},
 | 
						|
	{0x3820, 0x00},
 | 
						|
	{0x3827, 0xec},
 | 
						|
	{0x370c, 0x03},
 | 
						|
	{0x3612, 0x5b},
 | 
						|
	{0x3618, 0x04},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5002, 0x41},
 | 
						|
	{0x5003, 0x08},
 | 
						|
	{0x5a00, 0x08},
 | 
						|
	{0x3000, 0x00},
 | 
						|
	{0x3001, 0x00},
 | 
						|
	{0x3002, 0x00},
 | 
						|
	{0x3016, 0x08},
 | 
						|
	{0x3017, 0xe0},
 | 
						|
	{0x3018, 0x44},
 | 
						|
	{0x301c, 0xf8},
 | 
						|
	{0x301d, 0xf0},
 | 
						|
	{0x3a18, 0x00},
 | 
						|
	{0x3a19, 0xf8},
 | 
						|
	{0x3c01, 0x80},
 | 
						|
	{0x3b07, 0x0c},
 | 
						|
	{0x380c, 0x09},
 | 
						|
	{0x380d, 0x70},
 | 
						|
	{0x3814, 0x11},
 | 
						|
	{0x3815, 0x11},
 | 
						|
	{0x3708, 0x64},
 | 
						|
	{0x3709, 0x12},
 | 
						|
	{0x3808, 0x07},
 | 
						|
	{0x3809, 0x80},
 | 
						|
	{0x380a, 0x04},
 | 
						|
	{0x380b, 0x38},
 | 
						|
	{0x3800, 0x01},
 | 
						|
	{0x3801, 0x5c},
 | 
						|
	{0x3802, 0x01},
 | 
						|
	{0x3803, 0xb2},
 | 
						|
	{0x3804, 0x08},
 | 
						|
	{0x3805, 0xe3},
 | 
						|
	{0x3806, 0x05},
 | 
						|
	{0x3807, 0xf1},
 | 
						|
	{0x3811, 0x04},
 | 
						|
	{0x3813, 0x02},
 | 
						|
	{0x3630, 0x2e},
 | 
						|
	{0x3632, 0xe2},
 | 
						|
	{0x3633, 0x23},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x3636, 0x06},
 | 
						|
	{0x3620, 0x64},
 | 
						|
	{0x3621, 0xe0},
 | 
						|
	{0x3600, 0x37},
 | 
						|
	{0x3704, 0xa0},
 | 
						|
	{0x3703, 0x5a},
 | 
						|
	{0x3715, 0x78},
 | 
						|
	{0x3717, 0x01},
 | 
						|
	{0x3731, 0x02},
 | 
						|
	{0x370b, 0x60},
 | 
						|
	{0x3705, 0x1a},
 | 
						|
	{0x3f05, 0x02},
 | 
						|
	{0x3f06, 0x10},
 | 
						|
	{0x3f01, 0x0a},
 | 
						|
	{0x3a08, 0x01},
 | 
						|
	{0x3a09, 0x4b},
 | 
						|
	{0x3a0a, 0x01},
 | 
						|
	{0x3a0b, 0x13},
 | 
						|
	{0x3a0d, 0x04},
 | 
						|
	{0x3a0e, 0x03},
 | 
						|
	{0x3a0f, 0x58},
 | 
						|
	{0x3a10, 0x50},
 | 
						|
	{0x3a1b, 0x58},
 | 
						|
	{0x3a1e, 0x50},
 | 
						|
	{0x3a11, 0x60},
 | 
						|
	{0x3a1f, 0x28},
 | 
						|
	{0x4001, 0x02},
 | 
						|
	{0x4004, 0x04},
 | 
						|
	{0x4000, 0x09},
 | 
						|
	{0x4837, 0x19},
 | 
						|
	{0x4800, 0x34},
 | 
						|
	{0x3503, 0x03},
 | 
						|
	{0x0100, 0x01},
 | 
						|
};
 | 
						|
 | 
						|
static struct regval_list ov5647_2x2binned_10bpp[] = {
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x0103, 0x01},
 | 
						|
	{0x3034, 0x1a},
 | 
						|
	{0x3035, 0x21},
 | 
						|
	{0x3036, 0x62},
 | 
						|
	{0x303c, 0x11},
 | 
						|
	{0x3106, 0xf5},
 | 
						|
	{0x3827, 0xec},
 | 
						|
	{0x370c, 0x03},
 | 
						|
	{0x3612, 0x59},
 | 
						|
	{0x3618, 0x00},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5002, 0x41},
 | 
						|
	{0x5003, 0x08},
 | 
						|
	{0x5a00, 0x08},
 | 
						|
	{0x3000, 0x00},
 | 
						|
	{0x3001, 0x00},
 | 
						|
	{0x3002, 0x00},
 | 
						|
	{0x3016, 0x08},
 | 
						|
	{0x3017, 0xe0},
 | 
						|
	{0x3018, 0x44},
 | 
						|
	{0x301c, 0xf8},
 | 
						|
	{0x301d, 0xf0},
 | 
						|
	{0x3a18, 0x00},
 | 
						|
	{0x3a19, 0xf8},
 | 
						|
	{0x3c01, 0x80},
 | 
						|
	{0x3b07, 0x0c},
 | 
						|
	{0x3800, 0x00},
 | 
						|
	{0x3801, 0x00},
 | 
						|
	{0x3802, 0x00},
 | 
						|
	{0x3803, 0x00},
 | 
						|
	{0x3804, 0x0a},
 | 
						|
	{0x3805, 0x3f},
 | 
						|
	{0x3806, 0x07},
 | 
						|
	{0x3807, 0xa3},
 | 
						|
	{0x3808, 0x05},
 | 
						|
	{0x3809, 0x10},
 | 
						|
	{0x380a, 0x03},
 | 
						|
	{0x380b, 0xcc},
 | 
						|
	{0x380c, 0x07},
 | 
						|
	{0x380d, 0x68},
 | 
						|
	{0x3811, 0x0c},
 | 
						|
	{0x3813, 0x06},
 | 
						|
	{0x3814, 0x31},
 | 
						|
	{0x3815, 0x31},
 | 
						|
	{0x3630, 0x2e},
 | 
						|
	{0x3632, 0xe2},
 | 
						|
	{0x3633, 0x23},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x3636, 0x06},
 | 
						|
	{0x3620, 0x64},
 | 
						|
	{0x3621, 0xe0},
 | 
						|
	{0x3600, 0x37},
 | 
						|
	{0x3704, 0xa0},
 | 
						|
	{0x3703, 0x5a},
 | 
						|
	{0x3715, 0x78},
 | 
						|
	{0x3717, 0x01},
 | 
						|
	{0x3731, 0x02},
 | 
						|
	{0x370b, 0x60},
 | 
						|
	{0x3705, 0x1a},
 | 
						|
	{0x3f05, 0x02},
 | 
						|
	{0x3f06, 0x10},
 | 
						|
	{0x3f01, 0x0a},
 | 
						|
	{0x3a08, 0x01},
 | 
						|
	{0x3a09, 0x28},
 | 
						|
	{0x3a0a, 0x00},
 | 
						|
	{0x3a0b, 0xf6},
 | 
						|
	{0x3a0d, 0x08},
 | 
						|
	{0x3a0e, 0x06},
 | 
						|
	{0x3a0f, 0x58},
 | 
						|
	{0x3a10, 0x50},
 | 
						|
	{0x3a1b, 0x58},
 | 
						|
	{0x3a1e, 0x50},
 | 
						|
	{0x3a11, 0x60},
 | 
						|
	{0x3a1f, 0x28},
 | 
						|
	{0x4001, 0x02},
 | 
						|
	{0x4004, 0x04},
 | 
						|
	{0x4000, 0x09},
 | 
						|
	{0x4837, 0x16},
 | 
						|
	{0x4800, 0x24},
 | 
						|
	{0x3503, 0x03},
 | 
						|
	{0x3820, 0x41},
 | 
						|
	{0x3821, 0x01},
 | 
						|
	{0x350a, 0x00},
 | 
						|
	{0x350b, 0x10},
 | 
						|
	{0x3500, 0x00},
 | 
						|
	{0x3501, 0x1a},
 | 
						|
	{0x3502, 0xf0},
 | 
						|
	{0x3212, 0xa0},
 | 
						|
	{0x0100, 0x01},
 | 
						|
};
 | 
						|
 | 
						|
static struct regval_list ov5647_640x480_10bpp[] = {
 | 
						|
	{0x0100, 0x00},
 | 
						|
	{0x0103, 0x01},
 | 
						|
	{0x3035, 0x11},
 | 
						|
	{0x3036, 0x46},
 | 
						|
	{0x303c, 0x11},
 | 
						|
	{0x3821, 0x01},
 | 
						|
	{0x3820, 0x41},
 | 
						|
	{0x370c, 0x03},
 | 
						|
	{0x3612, 0x59},
 | 
						|
	{0x3618, 0x00},
 | 
						|
	{0x5000, 0x06},
 | 
						|
	{0x5003, 0x08},
 | 
						|
	{0x5a00, 0x08},
 | 
						|
	{0x3000, 0xff},
 | 
						|
	{0x3001, 0xff},
 | 
						|
	{0x3002, 0xff},
 | 
						|
	{0x301d, 0xf0},
 | 
						|
	{0x3a18, 0x00},
 | 
						|
	{0x3a19, 0xf8},
 | 
						|
	{0x3c01, 0x80},
 | 
						|
	{0x3b07, 0x0c},
 | 
						|
	{0x380c, 0x07},
 | 
						|
	{0x380d, 0x3c},
 | 
						|
	{0x3814, 0x35},
 | 
						|
	{0x3815, 0x35},
 | 
						|
	{0x3708, 0x64},
 | 
						|
	{0x3709, 0x52},
 | 
						|
	{0x3808, 0x02},
 | 
						|
	{0x3809, 0x80},
 | 
						|
	{0x380a, 0x01},
 | 
						|
	{0x380b, 0xe0},
 | 
						|
	{0x3800, 0x00},
 | 
						|
	{0x3801, 0x10},
 | 
						|
	{0x3802, 0x00},
 | 
						|
	{0x3803, 0x00},
 | 
						|
	{0x3804, 0x0a},
 | 
						|
	{0x3805, 0x2f},
 | 
						|
	{0x3806, 0x07},
 | 
						|
	{0x3807, 0x9f},
 | 
						|
	{0x3630, 0x2e},
 | 
						|
	{0x3632, 0xe2},
 | 
						|
	{0x3633, 0x23},
 | 
						|
	{0x3634, 0x44},
 | 
						|
	{0x3620, 0x64},
 | 
						|
	{0x3621, 0xe0},
 | 
						|
	{0x3600, 0x37},
 | 
						|
	{0x3704, 0xa0},
 | 
						|
	{0x3703, 0x5a},
 | 
						|
	{0x3715, 0x78},
 | 
						|
	{0x3717, 0x01},
 | 
						|
	{0x3731, 0x02},
 | 
						|
	{0x370b, 0x60},
 | 
						|
	{0x3705, 0x1a},
 | 
						|
	{0x3f05, 0x02},
 | 
						|
	{0x3f06, 0x10},
 | 
						|
	{0x3f01, 0x0a},
 | 
						|
	{0x3a08, 0x01},
 | 
						|
	{0x3a09, 0x2e},
 | 
						|
	{0x3a0a, 0x00},
 | 
						|
	{0x3a0b, 0xfb},
 | 
						|
	{0x3a0d, 0x02},
 | 
						|
	{0x3a0e, 0x01},
 | 
						|
	{0x3a0f, 0x58},
 | 
						|
	{0x3a10, 0x50},
 | 
						|
	{0x3a1b, 0x58},
 | 
						|
	{0x3a1e, 0x50},
 | 
						|
	{0x3a11, 0x60},
 | 
						|
	{0x3a1f, 0x28},
 | 
						|
	{0x4001, 0x02},
 | 
						|
	{0x4004, 0x02},
 | 
						|
	{0x4000, 0x09},
 | 
						|
	{0x3000, 0x00},
 | 
						|
	{0x3001, 0x00},
 | 
						|
	{0x3002, 0x00},
 | 
						|
	{0x3017, 0xe0},
 | 
						|
	{0x301c, 0xfc},
 | 
						|
	{0x3636, 0x06},
 | 
						|
	{0x3016, 0x08},
 | 
						|
	{0x3827, 0xec},
 | 
						|
	{0x3018, 0x44},
 | 
						|
	{0x3035, 0x21},
 | 
						|
	{0x3106, 0xf5},
 | 
						|
	{0x3034, 0x1a},
 | 
						|
	{0x301c, 0xf8},
 | 
						|
	{0x4800, 0x34},
 | 
						|
	{0x3503, 0x03},
 | 
						|
	{0x0100, 0x01},
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static const s64 link_freq_menu_items[] = {
 | 
						|
	175000000,
 | 
						|
	163333400,
 | 
						|
	163333400,
 | 
						|
	110000000,
 | 
						|
};
 | 
						|
 | 
						|
static const struct ov5647_mode ov5647_modes[] = {
 | 
						|
	/* 2592x1944 full resolution full FOV 10-bit mode. */
 | 
						|
	{
 | 
						|
		.format = {
 | 
						|
			.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
			.colorspace	= V4L2_COLORSPACE_RAW,
 | 
						|
			.field		= V4L2_FIELD_NONE,
 | 
						|
			.width		= 2592,
 | 
						|
			.height		= 1944
 | 
						|
		},
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 150000,
 | 
						|
		},
 | 
						|
		.crop = {
 | 
						|
			.left		= OV5647_PIXEL_ARRAY_LEFT,
 | 
						|
			.top		= OV5647_PIXEL_ARRAY_TOP,
 | 
						|
			.width		= 2592,
 | 
						|
			.height		= 1944
 | 
						|
		},
 | 
						|
		.pixel_rate	= 87500000,
 | 
						|
		.hts		= 2844,
 | 
						|
		.vts		= 0x7b0,
 | 
						|
		.link_freq_index = 0,
 | 
						|
		.reg_list	= ov5647_2592x1944_10bpp,
 | 
						|
		.num_regs	= ARRAY_SIZE(ov5647_2592x1944_10bpp)
 | 
						|
	},
 | 
						|
	/* 1080p30 10-bit mode. Full resolution centre-cropped down to 1080p. */
 | 
						|
	{
 | 
						|
		.format = {
 | 
						|
			.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
			.colorspace	= V4L2_COLORSPACE_RAW,
 | 
						|
			.field		= V4L2_FIELD_NONE,
 | 
						|
			.width		= 1920,
 | 
						|
			.height		= 1080
 | 
						|
		},
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 300000,
 | 
						|
		},
 | 
						|
		.crop = {
 | 
						|
			.left		= 348 + OV5647_PIXEL_ARRAY_LEFT,
 | 
						|
			.top		= 434 + OV5647_PIXEL_ARRAY_TOP,
 | 
						|
			.width		= 1928,
 | 
						|
			.height		= 1080,
 | 
						|
		},
 | 
						|
		.pixel_rate	= 81666700,
 | 
						|
		.hts		= 2416,
 | 
						|
		.vts		= 0x450,
 | 
						|
		.link_freq_index = 1,
 | 
						|
		.reg_list	= ov5647_1080p30_10bpp,
 | 
						|
		.num_regs	= ARRAY_SIZE(ov5647_1080p30_10bpp)
 | 
						|
	},
 | 
						|
	/* 2x2 binned full FOV 10-bit mode. */
 | 
						|
	{
 | 
						|
		.format = {
 | 
						|
			.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
			.colorspace	= V4L2_COLORSPACE_RAW,
 | 
						|
			.field		= V4L2_FIELD_NONE,
 | 
						|
			.width		= 1296,
 | 
						|
			.height		= 972
 | 
						|
		},
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 450000,
 | 
						|
		},
 | 
						|
		.crop = {
 | 
						|
			.left		= OV5647_PIXEL_ARRAY_LEFT,
 | 
						|
			.top		= OV5647_PIXEL_ARRAY_TOP,
 | 
						|
			.width		= 2592,
 | 
						|
			.height		= 1944,
 | 
						|
		},
 | 
						|
		.pixel_rate	= 81666700,
 | 
						|
		.hts		= 1896,
 | 
						|
		.vts		= 0x59b,
 | 
						|
		.link_freq_index = 2,
 | 
						|
		.reg_list	= ov5647_2x2binned_10bpp,
 | 
						|
		.num_regs	= ARRAY_SIZE(ov5647_2x2binned_10bpp)
 | 
						|
	},
 | 
						|
	/* 10-bit VGA full FOV 60fps. 2x2 binned and subsampled down to VGA. */
 | 
						|
	{
 | 
						|
		.format = {
 | 
						|
			.code		= MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
			.colorspace	= V4L2_COLORSPACE_RAW,
 | 
						|
			.field		= V4L2_FIELD_NONE,
 | 
						|
			.width		= 640,
 | 
						|
			.height		= 480
 | 
						|
		},
 | 
						|
		.max_fps = {
 | 
						|
			.numerator = 10000,
 | 
						|
			.denominator = 900000,
 | 
						|
		},
 | 
						|
		.crop = {
 | 
						|
			.left		= 16 + OV5647_PIXEL_ARRAY_LEFT,
 | 
						|
			.top		= OV5647_PIXEL_ARRAY_TOP,
 | 
						|
			.width		= 2560,
 | 
						|
			.height		= 1920,
 | 
						|
		},
 | 
						|
		.pixel_rate	= 55000000,
 | 
						|
		.hts		= 1852,
 | 
						|
		.vts		= 0x1f8,
 | 
						|
		.link_freq_index = 3,
 | 
						|
		.reg_list	= ov5647_640x480_10bpp,
 | 
						|
		.num_regs	= ARRAY_SIZE(ov5647_640x480_10bpp)
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
/* Default sensor mode is 2x2 binned 640x480 SBGGR10_1X10. */
 | 
						|
#define OV5647_DEFAULT_MODE	(&ov5647_modes[0])
 | 
						|
#define OV5647_DEFAULT_FORMAT	(ov5647_modes[0].format)
 | 
						|
 | 
						|
static int ov5647_write16(struct v4l2_subdev *sd, u16 reg, u16 val)
 | 
						|
{
 | 
						|
	unsigned char data[4] = { reg >> 8, reg & 0xff, val >> 8, val & 0xff};
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = i2c_master_send(client, data, 4);
 | 
						|
	/*
 | 
						|
	 * Writing the wrong number of bytes also needs to be flagged as an
 | 
						|
	 * error. Success needs to produce a 0 return code.
 | 
						|
	 */
 | 
						|
	if (ret == 4) {
 | 
						|
		ret = 0;
 | 
						|
	} else {
 | 
						|
		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
 | 
						|
			__func__, reg);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_write(struct v4l2_subdev *sd, u16 reg, u8 val)
 | 
						|
{
 | 
						|
	unsigned char data[3] = { reg >> 8, reg & 0xff, val};
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = i2c_master_send(client, data, 3);
 | 
						|
	/*
 | 
						|
	 * Writing the wrong number of bytes also needs to be flagged as an
 | 
						|
	 * error. Success needs to produce a 0 return code.
 | 
						|
	 */
 | 
						|
	if (ret == 3) {
 | 
						|
		ret = 0;
 | 
						|
	} else {
 | 
						|
		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
 | 
						|
				__func__, reg);
 | 
						|
		if (ret >= 0)
 | 
						|
			ret = -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_read(struct v4l2_subdev *sd, u16 reg, u8 *val)
 | 
						|
{
 | 
						|
	unsigned char data_w[2] = { reg >> 8, reg & 0xff };
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = i2c_master_send(client, data_w, 2);
 | 
						|
	/*
 | 
						|
	 * A negative return code, or sending the wrong number of bytes, both
 | 
						|
	 * count as an error.
 | 
						|
	 */
 | 
						|
	if (ret != 2) {
 | 
						|
		dev_dbg(&client->dev, "%s: i2c write error, reg: %x\n",
 | 
						|
			__func__, reg);
 | 
						|
		if (ret >= 0)
 | 
						|
			ret = -EINVAL;
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = i2c_master_recv(client, val, 1);
 | 
						|
	/*
 | 
						|
	 * The only return value indicating success is 1. Anything else, even
 | 
						|
	 * a non-negative value, indicates something went wrong.
 | 
						|
	 */
 | 
						|
	if (ret == 1) {
 | 
						|
		ret = 0;
 | 
						|
	} else {
 | 
						|
		dev_dbg(&client->dev, "%s: i2c read error, reg: %x\n",
 | 
						|
				__func__, reg);
 | 
						|
		if (ret >= 0)
 | 
						|
			ret = -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_write_array(struct v4l2_subdev *sd,
 | 
						|
			      const struct regval_list *regs, int array_size)
 | 
						|
{
 | 
						|
	int i, ret;
 | 
						|
 | 
						|
	for (i = 0; i < array_size; i++) {
 | 
						|
		ret = ov5647_write(sd, regs[i].addr, regs[i].data);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_set_virtual_channel(struct v4l2_subdev *sd, int channel)
 | 
						|
{
 | 
						|
	u8 channel_id;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = ov5647_read(sd, OV5647_REG_MIPI_CTRL14, &channel_id);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	channel_id &= ~(3 << 6);
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_REG_MIPI_CTRL14,
 | 
						|
			    channel_id | (channel << 6));
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_set_mode(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	u8 resetval, rdval;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = ov5647_read(sd, OV5647_SW_STANDBY, &rdval);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_write_array(sd, sensor->mode->reg_list,
 | 
						|
				 sensor->mode->num_regs);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(&client->dev, "write sensor default regs error\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = ov5647_set_virtual_channel(sd, 0);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_read(sd, OV5647_SW_STANDBY, &resetval);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (!(resetval & 0x01)) {
 | 
						|
		dev_err(&client->dev, "Device was in SW standby");
 | 
						|
		ret = ov5647_write(sd, OV5647_SW_STANDBY, 0x01);
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_stream_on(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	u8 val = MIPI_CTRL00_BUS_IDLE;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = ov5647_set_mode(sd);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&client->dev, "Failed to program sensor mode: %d\n", ret);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Apply customized values from user when stream starts. */
 | 
						|
	ret =  __v4l2_ctrl_handler_setup(sd->ctrl_handler);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (sensor->clock_ncont)
 | 
						|
		val |= MIPI_CTRL00_CLOCK_LANE_GATE |
 | 
						|
		       MIPI_CTRL00_LINE_SYNC_ENABLE;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00, val);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x00);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x00);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_stream_off(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_MIPI_CTRL00,
 | 
						|
			   MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
 | 
						|
			   MIPI_CTRL00_CLOCK_LANE_DISABLE);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_FRAME_OFF_NUMBER, 0x0f);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5640_REG_PAD_OUT, 0x01);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_power_on(struct device *dev)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = dev_get_drvdata(dev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dev_info(dev, "OV5647 power on\n");
 | 
						|
 | 
						|
	if (sensor->pwdn) {
 | 
						|
		gpiod_set_value_cansleep(sensor->pwdn, 0);
 | 
						|
		msleep(PWDN_ACTIVE_DELAY_MS);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = clk_prepare_enable(sensor->xclk);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(dev, "clk prepare enable failed\n");
 | 
						|
		goto error_pwdn;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = ov5647_write_array(&sensor->sd, sensor_oe_enable_regs,
 | 
						|
				 ARRAY_SIZE(sensor_oe_enable_regs));
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(dev, "write sensor_oe_enable_regs error\n");
 | 
						|
		goto error_clk_disable;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Stream off to coax lanes into LP-11 state. */
 | 
						|
	ret = ov5647_stream_off(&sensor->sd);
 | 
						|
	if (ret < 0) {
 | 
						|
		dev_err(dev, "camera not available, check power\n");
 | 
						|
		goto error_clk_disable;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
error_clk_disable:
 | 
						|
	clk_disable_unprepare(sensor->xclk);
 | 
						|
error_pwdn:
 | 
						|
	gpiod_set_value_cansleep(sensor->pwdn, 1);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_power_off(struct device *dev)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = dev_get_drvdata(dev);
 | 
						|
	u8 rdval;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dev_info(dev, "OV5647 power off\n");
 | 
						|
 | 
						|
	ret = ov5647_write_array(&sensor->sd, sensor_oe_disable_regs,
 | 
						|
				 ARRAY_SIZE(sensor_oe_disable_regs));
 | 
						|
	if (ret < 0)
 | 
						|
		dev_dbg(dev, "disable oe failed\n");
 | 
						|
 | 
						|
	/* Enter software standby */
 | 
						|
	ret = ov5647_read(&sensor->sd, OV5647_SW_STANDBY, &rdval);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_dbg(dev, "software standby failed\n");
 | 
						|
 | 
						|
	rdval &= ~0x01;
 | 
						|
	ret = ov5647_write(&sensor->sd, OV5647_SW_STANDBY, rdval);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_dbg(dev, "software standby failed\n");
 | 
						|
 | 
						|
	clk_disable_unprepare(sensor->xclk);
 | 
						|
	gpiod_set_value_cansleep(sensor->pwdn, 1);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_VIDEO_ADV_DEBUG
 | 
						|
static int ov5647_sensor_get_register(struct v4l2_subdev *sd,
 | 
						|
				      struct v4l2_dbg_register *reg)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 val;
 | 
						|
 | 
						|
	ret = ov5647_read(sd, reg->reg & 0xff, &val);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	reg->val = val;
 | 
						|
	reg->size = 1;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
 | 
						|
				      const struct v4l2_dbg_register *reg)
 | 
						|
{
 | 
						|
	return ov5647_write(sd, reg->reg & 0xff, reg->val & 0xff);
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static void ov5647_get_module_inf(struct ov5647 *sensor,
 | 
						|
				  struct rkmodule_inf *inf)
 | 
						|
{
 | 
						|
	memset(inf, 0, sizeof(*inf));
 | 
						|
	strscpy(inf->base.sensor, OV5647_NAME, sizeof(inf->base.sensor));
 | 
						|
	strscpy(inf->base.module, sensor->module_name,
 | 
						|
		sizeof(inf->base.module));
 | 
						|
	strscpy(inf->base.lens, sensor->len_name, sizeof(inf->base.lens));
 | 
						|
}
 | 
						|
 | 
						|
static long ov5647_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	long ret = 0;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case RKMODULE_GET_MODULE_INFO:
 | 
						|
		ov5647_get_module_inf(sensor, (struct rkmodule_inf *)arg);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		ret = -ENOIOCTLCMD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/* Subdev core operations registration */
 | 
						|
static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
 | 
						|
	.subscribe_event	= v4l2_ctrl_subdev_subscribe_event,
 | 
						|
	.unsubscribe_event	= v4l2_event_subdev_unsubscribe,
 | 
						|
#ifdef CONFIG_VIDEO_ADV_DEBUG
 | 
						|
	.g_register		= ov5647_sensor_get_register,
 | 
						|
	.s_register		= ov5647_sensor_set_register,
 | 
						|
#endif
 | 
						|
	.ioctl	= ov5647_ioctl,
 | 
						|
};
 | 
						|
 | 
						|
static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
 | 
						|
{
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	mutex_lock(&sensor->lock);
 | 
						|
	if (sensor->streaming == enable) {
 | 
						|
		mutex_unlock(&sensor->lock);
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (enable) {
 | 
						|
		dev_info(&client->dev, "stream start\n");
 | 
						|
		ret = pm_runtime_resume(&client->dev);
 | 
						|
		if (ret < 0)
 | 
						|
		{
 | 
						|
			dev_err(&client->dev, "pm_runtime_resume failed: %d\n", ret);
 | 
						|
			goto error_unlock;
 | 
						|
		}
 | 
						|
		ret = pm_runtime_get(&client->dev);
 | 
						|
		if (ret < 0)
 | 
						|
		{
 | 
						|
			dev_err(&client->dev, "pm_runtime_get failed: %d\n", ret);
 | 
						|
			goto error_unlock;
 | 
						|
		}
 | 
						|
		ret = ov5647_stream_on(sd);
 | 
						|
		if (ret < 0) {
 | 
						|
			dev_err(&client->dev, "stream start failed: %d\n", ret);
 | 
						|
			goto error_pm;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		dev_info(&client->dev, "stream stop\n");
 | 
						|
		ret = ov5647_stream_off(sd);
 | 
						|
		if (ret < 0) {
 | 
						|
			dev_err(&client->dev, "stream stop failed: %d\n", ret);
 | 
						|
			goto error_pm;
 | 
						|
		}
 | 
						|
		pm_runtime_put(&client->dev);
 | 
						|
	}
 | 
						|
 | 
						|
	sensor->streaming = enable;
 | 
						|
	mutex_unlock(&sensor->lock);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
error_pm:
 | 
						|
	pm_runtime_put(&client->dev);
 | 
						|
error_unlock:
 | 
						|
	mutex_unlock(&sensor->lock);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_g_frame_interval(struct v4l2_subdev *sd,
 | 
						|
				   struct v4l2_subdev_frame_interval *fi)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	const struct ov5647_mode *mode = sensor->mode;
 | 
						|
 | 
						|
	mutex_lock(&sensor->lock);
 | 
						|
	fi->interval = mode->max_fps;
 | 
						|
	mutex_unlock(&sensor->lock);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad_id,
 | 
						|
				struct v4l2_mbus_config *config)
 | 
						|
{
 | 
						|
	config->type = V4L2_MBUS_CSI2_DPHY;
 | 
						|
	config->bus.mipi_csi2.num_data_lanes = OV5647_LANES;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static int ov5647_g_input_status(struct v4l2_subdev *sd, u32 *status)
 | 
						|
{
 | 
						|
	*status = 0;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
static const struct v4l2_subdev_video_ops ov5647_subdev_video_ops = {
 | 
						|
	.s_stream =		ov5647_s_stream,
 | 
						|
	.g_input_status = ov5647_g_input_status,
 | 
						|
	.g_frame_interval = ov5647_g_frame_interval,
 | 
						|
 | 
						|
};
 | 
						|
 | 
						|
/* This function returns the mbus code for the current settings of the
 | 
						|
   HFLIP and VFLIP controls. */
 | 
						|
 | 
						|
static u32 ov5647_get_mbus_code(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	/* The control values are only 0 or 1. */
 | 
						|
	int index =  sensor->hflip->val | (sensor->vflip->val << 1);
 | 
						|
 | 
						|
	static const u32 codes[4] = {
 | 
						|
		MEDIA_BUS_FMT_SGBRG10_1X10,
 | 
						|
		MEDIA_BUS_FMT_SBGGR10_1X10,
 | 
						|
		MEDIA_BUS_FMT_SRGGB10_1X10,
 | 
						|
		MEDIA_BUS_FMT_SGRBG10_1X10
 | 
						|
	};
 | 
						|
 | 
						|
	return codes[index];
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_enum_mbus_code(struct v4l2_subdev *sd,
 | 
						|
				 struct v4l2_subdev_state *sd_state,
 | 
						|
				 struct v4l2_subdev_mbus_code_enum *code)
 | 
						|
{
 | 
						|
	if (code->index > 0)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	code->code = ov5647_get_mbus_code(sd);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_enum_frame_interval(struct v4l2_subdev *sd,
 | 
						|
				       struct v4l2_subdev_state *sd_state,
 | 
						|
				       struct v4l2_subdev_frame_interval_enum *fie)
 | 
						|
{
 | 
						|
	if (fie->index >= ARRAY_SIZE(ov5647_modes))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	fie->code = MEDIA_BUS_FMT_SBGGR10_1X10;
 | 
						|
 | 
						|
	fie->width = ov5647_modes[fie->index].format.width;
 | 
						|
	fie->height = ov5647_modes[fie->index].format.height;
 | 
						|
	fie->interval = ov5647_modes[fie->index].max_fps;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_enum_frame_size(struct v4l2_subdev *sd,
 | 
						|
				  struct v4l2_subdev_state *sd_state,
 | 
						|
				  struct v4l2_subdev_frame_size_enum *fse)
 | 
						|
{
 | 
						|
	const struct v4l2_mbus_framefmt *fmt;
 | 
						|
 | 
						|
	if (fse->code != ov5647_get_mbus_code(sd) ||
 | 
						|
	    fse->index >= ARRAY_SIZE(ov5647_modes))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	fmt = &ov5647_modes[fse->index].format;
 | 
						|
	fse->min_width = fmt->width;
 | 
						|
	fse->max_width = fmt->width;
 | 
						|
	fse->min_height = fmt->height;
 | 
						|
	fse->max_height = fmt->height;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_get_pad_fmt(struct v4l2_subdev *sd,
 | 
						|
			      struct v4l2_subdev_state *sd_state,
 | 
						|
			      struct v4l2_subdev_format *format)
 | 
						|
{
 | 
						|
	struct v4l2_mbus_framefmt *fmt = &format->format;
 | 
						|
	const struct v4l2_mbus_framefmt *sensor_format;
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
 | 
						|
	mutex_lock(&sensor->lock);
 | 
						|
	switch (format->which) {
 | 
						|
	case V4L2_SUBDEV_FORMAT_TRY:
 | 
						|
		sensor_format = v4l2_subdev_get_try_format(sd, sd_state,
 | 
						|
							   format->pad);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		sensor_format = &sensor->mode->format;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	*fmt = *sensor_format;
 | 
						|
	/* The code we pass back must reflect the current h/vflips. */
 | 
						|
	fmt->code = ov5647_get_mbus_code(sd);
 | 
						|
	mutex_unlock(&sensor->lock);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_set_pad_fmt(struct v4l2_subdev *sd,
 | 
						|
			      struct v4l2_subdev_state *sd_state,
 | 
						|
			      struct v4l2_subdev_format *format)
 | 
						|
{
 | 
						|
	struct v4l2_mbus_framefmt *fmt = &format->format;
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
	const struct ov5647_mode *mode;
 | 
						|
 | 
						|
	mode = v4l2_find_nearest_size(ov5647_modes, ARRAY_SIZE(ov5647_modes),
 | 
						|
				      format.width, format.height,
 | 
						|
				      fmt->width, fmt->height);
 | 
						|
 | 
						|
	/* Update the sensor mode and apply at it at streamon time. */
 | 
						|
	mutex_lock(&sensor->lock);
 | 
						|
	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
 | 
						|
		*v4l2_subdev_get_try_format(sd, sd_state, format->pad) = mode->format;
 | 
						|
	} else {
 | 
						|
		int exposure_max, exposure_def;
 | 
						|
		int hblank, vblank;
 | 
						|
 | 
						|
		sensor->mode = mode;
 | 
						|
		__v4l2_ctrl_modify_range(sensor->pixel_rate, mode->pixel_rate,
 | 
						|
					 mode->pixel_rate, 1, mode->pixel_rate);
 | 
						|
 | 
						|
		hblank = mode->hts - mode->format.width;
 | 
						|
		__v4l2_ctrl_modify_range(sensor->hblank, hblank, hblank, 1,
 | 
						|
					 hblank);
 | 
						|
 | 
						|
		vblank = mode->vts - mode->format.height;
 | 
						|
		__v4l2_ctrl_modify_range(sensor->vblank, OV5647_VBLANK_MIN,
 | 
						|
					 OV5647_VTS_MAX - mode->format.height,
 | 
						|
					 1, vblank);
 | 
						|
		__v4l2_ctrl_s_ctrl(sensor->vblank, vblank);
 | 
						|
 | 
						|
		exposure_max = mode->vts - 4;
 | 
						|
		exposure_def = min(exposure_max, OV5647_EXPOSURE_DEFAULT);
 | 
						|
		__v4l2_ctrl_modify_range(sensor->exposure,
 | 
						|
					 sensor->exposure->minimum,
 | 
						|
					 exposure_max, sensor->exposure->step,
 | 
						|
					 exposure_def);
 | 
						|
	}
 | 
						|
	*fmt = mode->format;
 | 
						|
	/* The code we pass back must reflect the current h/vflips. */
 | 
						|
	fmt->code = ov5647_get_mbus_code(sd);
 | 
						|
 | 
						|
	__v4l2_ctrl_s_ctrl(sensor->link_freq, mode->link_freq_index);
 | 
						|
	v4l2_info(sd, "%s res wxh:%dx%d, link freq:%llu", __func__,
 | 
						|
			fmt->width, fmt->height, link_freq_menu_items[mode->link_freq_index]);
 | 
						|
	mutex_unlock(&sensor->lock);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = {
 | 
						|
	.enum_mbus_code		= ov5647_enum_mbus_code,
 | 
						|
	.enum_frame_interval	= ov5647_enum_frame_interval,
 | 
						|
	.enum_frame_size	= ov5647_enum_frame_size,
 | 
						|
	.set_fmt		= ov5647_set_pad_fmt,
 | 
						|
	.get_fmt		= ov5647_get_pad_fmt,
 | 
						|
	.get_mbus_config	= ov5647_g_mbus_config,
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_ops ov5647_subdev_ops = {
 | 
						|
	.core		= &ov5647_subdev_core_ops,
 | 
						|
	.video		= &ov5647_subdev_video_ops,
 | 
						|
	.pad		= &ov5647_subdev_pad_ops,
 | 
						|
};
 | 
						|
 | 
						|
static int ov5647_detect(struct v4l2_subdev *sd)
 | 
						|
{
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	u8 read;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_SW_RESET, 0x01);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_read(sd, OV5647_REG_CHIPID_H, &read);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (read != 0x56) {
 | 
						|
		dev_err(&client->dev, "ID High expected 0x56 got %x", read);
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = ov5647_read(sd, OV5647_REG_CHIPID_L, &read);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (read != 0x47) {
 | 
						|
		dev_err(&client->dev, "ID Low expected 0x47 got %x", read);
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_SW_RESET, 0x00);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 | 
						|
{
 | 
						|
	struct v4l2_mbus_framefmt *format =
 | 
						|
				v4l2_subdev_get_try_format(sd, fh->state, 0);
 | 
						|
	struct v4l2_rect *crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
 | 
						|
 | 
						|
	crop->left = OV5647_PIXEL_ARRAY_LEFT;
 | 
						|
	crop->top = OV5647_PIXEL_ARRAY_TOP;
 | 
						|
	crop->width = OV5647_PIXEL_ARRAY_WIDTH;
 | 
						|
	crop->height = OV5647_PIXEL_ARRAY_HEIGHT;
 | 
						|
 | 
						|
	*format = OV5647_DEFAULT_FORMAT;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_subdev_internal_ops ov5647_subdev_internal_ops = {
 | 
						|
	.open = ov5647_open,
 | 
						|
};
 | 
						|
 | 
						|
static int ov5647_s_auto_white_balance(struct v4l2_subdev *sd, u32 val)
 | 
						|
{
 | 
						|
	return ov5647_write(sd, OV5647_REG_AWB, val ? 1 : 0);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_autogain(struct v4l2_subdev *sd, u32 val)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 reg;
 | 
						|
 | 
						|
	/* Non-zero turns on AGC by clearing bit 1.*/
 | 
						|
	ret = ov5647_read(sd, OV5647_REG_AEC_AGC, ®);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_REG_AEC_AGC, val ? reg & ~BIT(1)
 | 
						|
							: reg | BIT(1));
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_exposure_auto(struct v4l2_subdev *sd, u32 val)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 reg;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Everything except V4L2_EXPOSURE_MANUAL turns on AEC by
 | 
						|
	 * clearing bit 0.
 | 
						|
	 */
 | 
						|
	ret = ov5647_read(sd, OV5647_REG_AEC_AGC, ®);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_REG_AEC_AGC,
 | 
						|
			    val == V4L2_EXPOSURE_MANUAL ? reg | BIT(0)
 | 
						|
							: reg & ~BIT(0));
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_analogue_gain(struct v4l2_subdev *sd, u32 val)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* 10 bits of gain, 2 in the high register. */
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_GAIN_HI, (val >> 8) & 3);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_REG_GAIN_LO, val & 0xff);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_exposure(struct v4l2_subdev *sd, u32 val)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/*
 | 
						|
	 * Sensor has 20 bits, but the bottom 4 bits are fractions of a line
 | 
						|
	 * which we leave as zero (and don't receive in "val").
 | 
						|
	 */
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_EXP_HI, (val >> 12) & 0xf);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = ov5647_write(sd, OV5647_REG_EXP_MID, (val >> 4) & 0xff);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	return ov5647_write(sd, OV5647_REG_EXP_LO, (val & 0xf) << 4);
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_flip( struct v4l2_subdev *sd, u16 reg, u32 ctrl_val)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 reg_val;
 | 
						|
 | 
						|
	/* Set or clear bit 1 and leave everything else alone. */
 | 
						|
	ret = ov5647_read(sd, reg, ®_val);
 | 
						|
	if (ret == 0) {
 | 
						|
		if (ctrl_val)
 | 
						|
			reg_val |= 2;
 | 
						|
		else
 | 
						|
			reg_val &= ~2;
 | 
						|
 | 
						|
		ret = ov5647_write(sd, reg, reg_val);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_s_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	struct ov5647 *sensor = container_of(ctrl->handler,
 | 
						|
					    struct ov5647, ctrls);
 | 
						|
	struct v4l2_subdev *sd = &sensor->sd;
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
 | 
						|
	/* v4l2_ctrl_lock() locks our own mutex */
 | 
						|
 | 
						|
	if (ctrl->id == V4L2_CID_VBLANK) {
 | 
						|
		int exposure_max, exposure_def;
 | 
						|
 | 
						|
		/* Update max exposure while meeting expected vblanking */
 | 
						|
		exposure_max = sensor->mode->format.height + ctrl->val - 4;
 | 
						|
		exposure_def = min(exposure_max, OV5647_EXPOSURE_DEFAULT);
 | 
						|
		__v4l2_ctrl_modify_range(sensor->exposure,
 | 
						|
					 sensor->exposure->minimum,
 | 
						|
					 exposure_max, sensor->exposure->step,
 | 
						|
					 exposure_def);
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * If the device is not powered up do not apply any controls
 | 
						|
	 * to H/W at this time. Instead the controls will be restored
 | 
						|
	 * at s_stream(1) time.
 | 
						|
	 */
 | 
						|
	if (pm_runtime_get_if_in_use(&client->dev) == 0)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	switch (ctrl->id) {
 | 
						|
	case V4L2_CID_AUTO_WHITE_BALANCE:
 | 
						|
		ret = ov5647_s_auto_white_balance(sd, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_AUTOGAIN:
 | 
						|
		ret = ov5647_s_autogain(sd, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_EXPOSURE_AUTO:
 | 
						|
		ret = ov5647_s_exposure_auto(sd, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_ANALOGUE_GAIN:
 | 
						|
		ret =  ov5647_s_analogue_gain(sd, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_EXPOSURE:
 | 
						|
		ret = ov5647_s_exposure(sd, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_VBLANK:
 | 
						|
		ret = ov5647_write16(sd, OV5647_REG_VTS_HI,
 | 
						|
				     sensor->mode->format.height + ctrl->val);
 | 
						|
		break;
 | 
						|
 | 
						|
	/* Read-only, but we adjust it based on mode. */
 | 
						|
	case V4L2_CID_PIXEL_RATE:
 | 
						|
	case V4L2_CID_HBLANK:
 | 
						|
		/* Read-only, but we adjust it based on mode. */
 | 
						|
		break;
 | 
						|
 | 
						|
	case V4L2_CID_HFLIP:
 | 
						|
		/* There's an in-built hflip in the sensor, so account for that here. */
 | 
						|
		ov5647_s_flip(sd, OV5647_REG_HFLIP, !ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_VFLIP:
 | 
						|
		ov5647_s_flip(sd, OV5647_REG_VFLIP, ctrl->val);
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		dev_info(&client->dev,
 | 
						|
			 "Control (id:0x%x, val:0x%x) not supported\n",
 | 
						|
			 ctrl->id, ctrl->val);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	pm_runtime_put(&client->dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_ctrl_ops ov5647_ctrl_ops = {
 | 
						|
	.s_ctrl = ov5647_s_ctrl,
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
static int ov5647_init_controls(struct ov5647 *sensor, struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd);
 | 
						|
	int hblank, exposure_max, exposure_def;
 | 
						|
	//struct v4l2_fwnode_device_properties props;
 | 
						|
 | 
						|
	v4l2_ctrl_handler_init(&sensor->ctrls, 8);
 | 
						|
 | 
						|
	sensor->link_freq = v4l2_ctrl_new_int_menu(&sensor->ctrls, NULL, V4L2_CID_LINK_FREQ,
 | 
						|
				      ARRAY_SIZE(link_freq_menu_items) - 1, 0, link_freq_menu_items);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
			  V4L2_CID_AUTOGAIN, 0, 1, 1, 0);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
			  V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 0);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std_menu(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
			       V4L2_CID_EXPOSURE_AUTO, V4L2_EXPOSURE_MANUAL,
 | 
						|
			       0, V4L2_EXPOSURE_MANUAL);
 | 
						|
 | 
						|
	exposure_max = sensor->mode->vts - 4;
 | 
						|
	exposure_def = min(exposure_max, OV5647_EXPOSURE_DEFAULT);
 | 
						|
	sensor->exposure = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					     V4L2_CID_EXPOSURE,
 | 
						|
					     OV5647_EXPOSURE_MIN,
 | 
						|
					     exposure_max, OV5647_EXPOSURE_STEP,
 | 
						|
					     exposure_def);
 | 
						|
 | 
						|
	/* min: 16 = 1.0x; max (10 bits); default: 32 = 2.0x. */
 | 
						|
	v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
			  V4L2_CID_ANALOGUE_GAIN, 16, 1023, 1, 32);
 | 
						|
 | 
						|
	/* By default, PIXEL_RATE is read only, but it does change per mode */
 | 
						|
	sensor->pixel_rate = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					       V4L2_CID_PIXEL_RATE,
 | 
						|
					       sensor->mode->pixel_rate,
 | 
						|
					       sensor->mode->pixel_rate, 1,
 | 
						|
					       sensor->mode->pixel_rate);
 | 
						|
 | 
						|
	/* By default, HBLANK is read only, but it does change per mode. */
 | 
						|
	hblank = sensor->mode->hts - sensor->mode->format.width;
 | 
						|
	sensor->hblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					   V4L2_CID_HBLANK, hblank, hblank, 1,
 | 
						|
					   hblank);
 | 
						|
 | 
						|
	sensor->vblank = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					   V4L2_CID_VBLANK, OV5647_VBLANK_MIN,
 | 
						|
					   OV5647_VTS_MAX -
 | 
						|
					   sensor->mode->format.height, 1,
 | 
						|
					   sensor->mode->vts -
 | 
						|
					   sensor->mode->format.height);
 | 
						|
 | 
						|
	sensor->hflip = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					  V4L2_CID_HFLIP, 0, 1, 1, 0);
 | 
						|
	if (sensor->hflip)
 | 
						|
		sensor->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 | 
						|
 | 
						|
	sensor->vflip = v4l2_ctrl_new_std(&sensor->ctrls, &ov5647_ctrl_ops,
 | 
						|
					  V4L2_CID_VFLIP, 0, 1, 1, 0);
 | 
						|
	if (sensor->vflip)
 | 
						|
		sensor->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 | 
						|
 | 
						|
	if (sensor->ctrls.error)
 | 
						|
		goto handler_free;
 | 
						|
 | 
						|
	sensor->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 | 
						|
	sensor->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 | 
						|
	sensor->sd.ctrl_handler = &sensor->ctrls;
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
handler_free:
 | 
						|
	dev_err(&client->dev, "%s Controls initialization failed (%d)\n",
 | 
						|
		__func__, sensor->ctrls.error);
 | 
						|
	v4l2_ctrl_handler_free(&sensor->ctrls);
 | 
						|
 | 
						|
	return sensor->ctrls.error;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_parse_dt(struct ov5647 *sensor, struct device_node *np)
 | 
						|
{
 | 
						|
	struct v4l2_fwnode_endpoint bus_cfg = {
 | 
						|
		.bus_type = V4L2_MBUS_CSI2_DPHY,
 | 
						|
	};
 | 
						|
	struct device_node *ep;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ep = of_graph_get_next_endpoint(np, NULL);
 | 
						|
	if (!ep)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
 | 
						|
	if (ret)
 | 
						|
		goto out;
 | 
						|
 | 
						|
	sensor->clock_ncont = bus_cfg.bus.mipi_csi2.flags &
 | 
						|
			      V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
 | 
						|
 | 
						|
out:
 | 
						|
	of_node_put(ep);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int ov5647_probe(struct i2c_client *client,
 | 
						|
			const struct i2c_device_id *did)
 | 
						|
{
 | 
						|
	struct device *dev = &client->dev;
 | 
						|
	struct device_node *np = dev->of_node;
 | 
						|
	struct ov5647 *sensor;
 | 
						|
	struct v4l2_subdev *sd;
 | 
						|
	u32 xclk_freq;
 | 
						|
	char facing[2];
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dev_info(dev, "driver version: %02x.%02x.%02x",
 | 
						|
		DRIVER_VERSION >> 16,
 | 
						|
		(DRIVER_VERSION & 0xff00) >> 8,
 | 
						|
		DRIVER_VERSION & 0x00ff);
 | 
						|
 | 
						|
	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
 | 
						|
	if (!sensor)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	if (IS_ENABLED(CONFIG_OF) && np) {
 | 
						|
		ret = ov5647_parse_dt(sensor, np);
 | 
						|
		if (ret) {
 | 
						|
			dev_err(dev, "DT parsing error: %d\n", ret);
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = of_property_read_u32(np, RKMODULE_CAMERA_MODULE_INDEX,
 | 
						|
				   &sensor->module_index);
 | 
						|
	ret |= of_property_read_string(np, RKMODULE_CAMERA_MODULE_FACING,
 | 
						|
				       &sensor->module_facing);
 | 
						|
	ret |= of_property_read_string(np, RKMODULE_CAMERA_MODULE_NAME,
 | 
						|
				       &sensor->module_name);
 | 
						|
	ret |= of_property_read_string(np, RKMODULE_CAMERA_LENS_NAME,
 | 
						|
				       &sensor->len_name);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(dev, "could not get module information!\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	sensor->xclk = devm_clk_get(dev, NULL);
 | 
						|
	if (IS_ERR(sensor->xclk)) {
 | 
						|
		dev_err(dev, "could not get xclk");
 | 
						|
		return PTR_ERR(sensor->xclk);
 | 
						|
	}
 | 
						|
 | 
						|
	xclk_freq = clk_get_rate(sensor->xclk);
 | 
						|
	if (xclk_freq != 25000000) {
 | 
						|
		dev_err(dev, "Unsupported clock frequency: %u\n", xclk_freq);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the power down GPIO asserted. */
 | 
						|
	sensor->pwdn = devm_gpiod_get_optional(dev, "pwdn", GPIOD_OUT_HIGH);
 | 
						|
	if (IS_ERR(sensor->pwdn)) {
 | 
						|
		dev_err(dev, "Failed to get 'pwdn' gpio\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_init(&sensor->lock);
 | 
						|
 | 
						|
	sensor->mode = OV5647_DEFAULT_MODE;
 | 
						|
 | 
						|
	ret = ov5647_init_controls(sensor, dev);
 | 
						|
	if (ret)
 | 
						|
		goto mutex_destroy;
 | 
						|
 | 
						|
	sd = &sensor->sd;
 | 
						|
	v4l2_i2c_subdev_init(sd, client, &ov5647_subdev_ops);
 | 
						|
	sd->internal_ops = &ov5647_subdev_internal_ops;
 | 
						|
	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
 | 
						|
 | 
						|
	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
 | 
						|
	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
 | 
						|
	ret = media_entity_pads_init(&sd->entity, 1, &sensor->pad);
 | 
						|
	if (ret < 0)
 | 
						|
		goto ctrl_handler_free;
 | 
						|
 | 
						|
	ret = ov5647_power_on(dev);
 | 
						|
	if (ret)
 | 
						|
		goto entity_cleanup;
 | 
						|
 | 
						|
	ret = ov5647_detect(sd);
 | 
						|
	if (ret < 0)
 | 
						|
		goto power_off;
 | 
						|
 | 
						|
	memset(facing, 0, sizeof(facing));
 | 
						|
	if (strcmp(sensor->module_facing, "back") == 0)
 | 
						|
		facing[0] = 'b';
 | 
						|
	else
 | 
						|
		facing[0] = 'f';
 | 
						|
 | 
						|
	snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
 | 
						|
		 sensor->module_index, facing,
 | 
						|
		 OV5647_NAME, dev_name(sd->dev));
 | 
						|
	ret = v4l2_async_register_subdev_sensor(sd);
 | 
						|
	if (ret < 0)
 | 
						|
		goto power_off;
 | 
						|
 | 
						|
	/* Enable runtime PM and turn off the device */
 | 
						|
	pm_runtime_set_active(dev);
 | 
						|
	pm_runtime_enable(dev);
 | 
						|
	pm_runtime_idle(dev);
 | 
						|
 | 
						|
	dev_info(dev, "OmniVision OV5647 camera driver probed\n");
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
power_off:
 | 
						|
	ov5647_power_off(dev);
 | 
						|
entity_cleanup:
 | 
						|
	media_entity_cleanup(&sd->entity);
 | 
						|
ctrl_handler_free:
 | 
						|
	v4l2_ctrl_handler_free(&sensor->ctrls);
 | 
						|
mutex_destroy:
 | 
						|
	mutex_destroy(&sensor->lock);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void ov5647_remove(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | 
						|
	struct ov5647 *sensor = to_sensor(sd);
 | 
						|
 | 
						|
	v4l2_async_unregister_subdev(&sensor->sd);
 | 
						|
	media_entity_cleanup(&sensor->sd.entity);
 | 
						|
	v4l2_ctrl_handler_free(&sensor->ctrls);
 | 
						|
	v4l2_device_unregister_subdev(sd);
 | 
						|
	pm_runtime_disable(&client->dev);
 | 
						|
	mutex_destroy(&sensor->lock);
 | 
						|
}
 | 
						|
 | 
						|
static const struct dev_pm_ops ov5647_pm_ops = {
 | 
						|
	SET_RUNTIME_PM_OPS(ov5647_power_off, ov5647_power_on, NULL)
 | 
						|
};
 | 
						|
 | 
						|
static const struct i2c_device_id ov5647_id[] = {
 | 
						|
	{ "ov5647", 0 },
 | 
						|
	{ /* sentinel */ }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(i2c, ov5647_id);
 | 
						|
 | 
						|
#if IS_ENABLED(CONFIG_OF)
 | 
						|
static const struct of_device_id ov5647_of_match[] = {
 | 
						|
	{ .compatible = "ovti,ov5647" },
 | 
						|
	{ /* sentinel */ },
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, ov5647_of_match);
 | 
						|
#endif
 | 
						|
 | 
						|
static struct i2c_driver ov5647_driver = {
 | 
						|
	.driver = {
 | 
						|
		.of_match_table = of_match_ptr(ov5647_of_match),
 | 
						|
		.name	= OV5647_NAME,
 | 
						|
		.pm	= &ov5647_pm_ops,
 | 
						|
	},
 | 
						|
	.probe		= ov5647_probe,
 | 
						|
	.remove		= ov5647_remove,
 | 
						|
	.id_table	= ov5647_id,
 | 
						|
};
 | 
						|
 | 
						|
module_i2c_driver(ov5647_driver);
 | 
						|
 | 
						|
MODULE_AUTHOR("Ramiro Oliveira <roliveir@synopsys.com>");
 | 
						|
MODULE_AUTHOR("Modify by abel <guilin1985@gmail.com>");
 | 
						|
MODULE_AUTHOR("Stephen Chen <stephen@radxa.com>");
 | 
						|
MODULE_DESCRIPTION("A low-level driver for OmniVision ov5647 sensors");
 | 
						|
MODULE_LICENSE("GPL v2");
 |