976 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			976 lines
		
	
	
		
			23 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0
 | 
						|
/*
 | 
						|
 * General device driver for awinic aw36518, FLASH LED Driver
 | 
						|
 *
 | 
						|
 * Copyright (C) 2022 Rockchip Electronics Co., Ltd.
 | 
						|
 *
 | 
						|
 * V0.0X01.0X00 init version.
 | 
						|
 * V0.0X01.0X01 fix power off torch not off issue.
 | 
						|
 * V0.0X01.0X02 fix get wrong time info issue.
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/delay.h>
 | 
						|
#include <linux/gpio/consumer.h>
 | 
						|
#include <linux/i2c.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/of.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/rk-camera-module.h>
 | 
						|
#include <linux/rk-led-flash.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/version.h>
 | 
						|
#include <media/v4l2-ctrls.h>
 | 
						|
#include <media/v4l2-device.h>
 | 
						|
#include <linux/compat.h>
 | 
						|
 | 
						|
#define DRIVER_VERSION			KERNEL_VERSION(0, 0x01, 0x02)
 | 
						|
#define AW36518_NAME			"aw36518"
 | 
						|
 | 
						|
#define AW36518_REG_ID			0x00
 | 
						|
#define AW36518_ID			0x30
 | 
						|
 | 
						|
#define AW36518_REG_MODE		0x01
 | 
						|
#define AW36518_REG_LED0_FLASH_CUR	0x03
 | 
						|
#define AW36518_REG_LED0_TORCH_CUR	0x05
 | 
						|
#define AW36518_REG_LED1_FLASH_CUR	0x03
 | 
						|
#define AW36518_REG_LED1_TORCH_CUR	0x05
 | 
						|
#define AW36518_HW_TORCH		BIT(4)
 | 
						|
#define AW36518_HW_STROBE		BIT(5)
 | 
						|
 | 
						|
#define AW36518_REG_FAULT		0x0A
 | 
						|
#define AW36518_REG_FL_SC		0x70
 | 
						|
#define AW36518_REG_FL_OT		BIT(2)
 | 
						|
#define AW36518_REG_FL_TO		BIT(0)
 | 
						|
 | 
						|
#define AW36518_REG_FAULT2		0x0B
 | 
						|
#define AW36518_REG_FL_OVP		BIT(1)
 | 
						|
 | 
						|
#define AW36518_REG_ENABLE		0x01
 | 
						|
#define LED_ON				0x03
 | 
						|
#define LED_OFF				0x00
 | 
						|
 | 
						|
/*  FLASH Brightness
 | 
						|
 *	min 2940uA, step 5870uA, max 1500000uA
 | 
						|
 */
 | 
						|
#define AW36518_MIN_FLASH_INTENSITY	2940
 | 
						|
#define AW36518_MAX_FLASH_INTENSITY	1500000
 | 
						|
#define AW36518_FLASH_INTENSITY_DEFAULT	748430
 | 
						|
#define AW36518_FLASH_INTENSITY_STEP	5870
 | 
						|
#define AW36518_FLASH_BRT_uA_TO_REG(a)	\
 | 
						|
	((a) < AW36518_MIN_FLASH_INTENSITY ? 0 :	\
 | 
						|
	 (((a) - AW36518_MIN_FLASH_INTENSITY) / AW36518_FLASH_INTENSITY_STEP))
 | 
						|
#define AW36518_FLASH_BRT_REG_TO_uA(a)		\
 | 
						|
	((a) * AW36518_FLASH_INTENSITY_STEP + AW36518_MIN_FLASH_INTENSITY)
 | 
						|
 | 
						|
/*  TORCH BRT
 | 
						|
 *	min 750uA, step 1510uA, max 3860000uA
 | 
						|
 */
 | 
						|
#define AW36518_MIN_TORCH_INTENSITY	750
 | 
						|
#define AW36518_MAX_TORCH_INTENSITY	386000
 | 
						|
#define AW36518_TORCH_INTENSITY_DEFAULT	192000
 | 
						|
#define AW36518_TORCH_INTENSITY_STEP	1510
 | 
						|
#define AW36518_TORCH_BRT_uA_TO_REG(a)	\
 | 
						|
	((a) < AW36518_MIN_TORCH_INTENSITY ? 0 :	\
 | 
						|
	 (((a) - AW36518_MIN_TORCH_INTENSITY) / AW36518_TORCH_INTENSITY_STEP))
 | 
						|
#define AW36518_TORCH_BRT_REG_TO_uA(a)		\
 | 
						|
	((a) * AW36518_TORCH_INTENSITY_STEP + AW36518_MIN_TORCH_INTENSITY)
 | 
						|
 | 
						|
 | 
						|
/*  FLASH TIMEOUT DURATION
 | 
						|
 *	min 40ms, step 40 or 200ms, max 1600ms
 | 
						|
 */
 | 
						|
#define TIMEOUT_MAX			1600000
 | 
						|
#define TIMEOUT_STEP			40000
 | 
						|
#define TIMEOUT_MIN			40000
 | 
						|
#define TIMEOUT_STEP2			200000
 | 
						|
#define TIMEOUT_DEFAULT			600000
 | 
						|
 | 
						|
#define AW36518_FLASH_TOUT_ms_TO_REG(a)	\
 | 
						|
	((a) < TIMEOUT_MIN ? 0 :	\
 | 
						|
	 (((a) - TIMEOUT_MIN) / TIMEOUT_STEP))
 | 
						|
#define AW36518_FLASH_TOUT_REG_TO_ms(a)		\
 | 
						|
	((a) * TIMEOUT_STEP + TIMEOUT_MIN)
 | 
						|
 | 
						|
static int debug;
 | 
						|
module_param(debug, int, 0644);
 | 
						|
MODULE_PARM_DESC(debug, "debug level (0-2)");
 | 
						|
 | 
						|
enum aw36518_led_id {
 | 
						|
	LED0 = 0,
 | 
						|
	LED1,
 | 
						|
	LED_MAX
 | 
						|
};
 | 
						|
 | 
						|
struct aw36518_led {
 | 
						|
	struct v4l2_subdev sd;
 | 
						|
	struct v4l2_ctrl_handler ctrls;
 | 
						|
	struct v4l2_ctrl *flash_brt;
 | 
						|
	struct v4l2_ctrl *torch_brt;
 | 
						|
	struct __kernel_old_timeval timestamp;
 | 
						|
	u32 max_flash_timeout;
 | 
						|
	u32 max_flash_intensity;
 | 
						|
	u32 max_torch_intensity;
 | 
						|
};
 | 
						|
 | 
						|
struct aw36518_flash {
 | 
						|
	struct i2c_client *client;
 | 
						|
	struct aw36518_led leds[LED_MAX];
 | 
						|
 | 
						|
	struct gpio_desc *en_gpio;
 | 
						|
	struct gpio_desc *torch_gpio;
 | 
						|
	struct gpio_desc *strobe_gpio;
 | 
						|
	struct gpio_desc *tx_gpio;
 | 
						|
 | 
						|
	struct mutex lock;
 | 
						|
 | 
						|
	u32 flash_timeout;
 | 
						|
	enum v4l2_flash_led_mode led_mode;
 | 
						|
 | 
						|
	u32 module_index;
 | 
						|
	const char *module_facing;
 | 
						|
	bool			power_on;
 | 
						|
};
 | 
						|
 | 
						|
#define to_led(sd) container_of(sd, struct aw36518_led, sd)
 | 
						|
 | 
						|
static int aw36518_i2c_write(struct aw36518_flash *flash, u8 reg, u8 val)
 | 
						|
{
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = i2c_smbus_write_byte_data(client, reg, val);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_err(&client->dev,
 | 
						|
			 "%s: reg:0x%x val:0x%x failed\n",
 | 
						|
			 __func__, reg, val);
 | 
						|
 | 
						|
	v4l2_dbg(2, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: reg:0x%x val:0x%x\n",
 | 
						|
		  __func__, reg, val);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_i2c_read(struct aw36518_flash *flash, u8 reg)
 | 
						|
{
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = i2c_smbus_read_byte_data(client, reg);
 | 
						|
	if (ret < 0)
 | 
						|
		dev_err(&client->dev,
 | 
						|
			 "%s: reg:0x%x failed\n",
 | 
						|
			 __func__, reg);
 | 
						|
 | 
						|
	dev_dbg(&client->dev, "%s: reg:0x%x val:0x%x\n",
 | 
						|
		 __func__, reg, ret);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_led_on(struct aw36518_flash *flash, bool on)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
	int temp;
 | 
						|
	u8 val = 0;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: on:%d\n", __func__, on);
 | 
						|
 | 
						|
	temp = aw36518_i2c_read(flash, AW36518_REG_ENABLE);
 | 
						|
	if (temp < 0)
 | 
						|
		dev_err(&client->dev,
 | 
						|
			 "%s: read reg:0x%x failed.\n",
 | 
						|
			 __func__, AW36518_REG_ENABLE);
 | 
						|
 | 
						|
	if (flash->led_mode == V4L2_FLASH_LED_MODE_FLASH && on)
 | 
						|
		temp = temp | 0x0c;
 | 
						|
	else
 | 
						|
		temp = temp & 0xfc;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: temp:%d\n", __func__, temp);
 | 
						|
	val = on ? LED_ON : LED_OFF;
 | 
						|
	ret = aw36518_i2c_write(flash, AW36518_REG_ENABLE, val | temp);
 | 
						|
	flash->leds[0].timestamp = ns_to_kernel_old_timeval(ktime_get_ns());
 | 
						|
	flash->leds[1].timestamp = flash->leds[0].timestamp;
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_get_fault(struct aw36518_flash *flash)
 | 
						|
{
 | 
						|
	int fault = 0;
 | 
						|
	int temp = 0;
 | 
						|
 | 
						|
	fault = aw36518_i2c_read(flash, AW36518_REG_FAULT);
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: 0x%x\n", __func__, fault);
 | 
						|
	fault = fault & 0xfd;
 | 
						|
 | 
						|
	temp = aw36518_i2c_read(flash, AW36518_REG_FAULT2);
 | 
						|
	fault = fault | (temp & 0x2);
 | 
						|
 | 
						|
	return fault;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_timeout_cal(struct aw36518_flash *flash)
 | 
						|
{
 | 
						|
	u8 val;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: timeout:%dUS\n", __func__, flash->flash_timeout);
 | 
						|
 | 
						|
	if (flash->flash_timeout < 400000)
 | 
						|
		val =  AW36518_FLASH_TOUT_ms_TO_REG(flash->flash_timeout);
 | 
						|
	else {
 | 
						|
		val =  (flash->flash_timeout - 0x400000) / TIMEOUT_STEP2;
 | 
						|
		val = val + 0x09;
 | 
						|
	}
 | 
						|
 | 
						|
	return val;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_set_timeout(struct aw36518_flash *flash, u32 timeout)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	u8 val;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: %d\n",
 | 
						|
		 __func__, flash->flash_timeout);
 | 
						|
 | 
						|
	flash->flash_timeout = timeout;
 | 
						|
	ret = aw36518_i2c_read(flash, 0x08);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	val =  aw36518_timeout_cal(flash);
 | 
						|
 | 
						|
	return aw36518_i2c_write(flash, 0x08, val | (ret & 0xf0));
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_torch_brt(struct aw36518_flash *flash,
 | 
						|
			     enum aw36518_led_id id)
 | 
						|
{
 | 
						|
	struct aw36518_led *led = &flash->leds[id];
 | 
						|
	u8 val, reg;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &led->sd,
 | 
						|
		 "%s: %d\n", __func__, led->torch_brt->val);
 | 
						|
 | 
						|
	val = AW36518_TORCH_BRT_uA_TO_REG(led->torch_brt->val);
 | 
						|
	reg = id ? AW36518_REG_LED1_TORCH_CUR : AW36518_REG_LED0_TORCH_CUR;
 | 
						|
	return aw36518_i2c_write(flash, reg, val);
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_flash_brt(struct aw36518_flash *flash,
 | 
						|
			     enum aw36518_led_id id)
 | 
						|
{
 | 
						|
	struct aw36518_led *led = &flash->leds[id];
 | 
						|
	u8 val, reg;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &led->sd,
 | 
						|
		 "%s: %d\n", __func__, led->flash_brt->val);
 | 
						|
 | 
						|
	val = AW36518_FLASH_BRT_uA_TO_REG(led->flash_brt->val);
 | 
						|
	reg = id ? AW36518_REG_LED1_FLASH_CUR : AW36518_REG_LED0_FLASH_CUR;
 | 
						|
	return aw36518_i2c_write(flash, reg, val);
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_set_mode(struct aw36518_flash *flash,
 | 
						|
			    enum aw36518_led_id id, unsigned int mode)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[id].sd,
 | 
						|
		 "%s: %d cur:%d\n", __func__,
 | 
						|
		 mode, flash->led_mode);
 | 
						|
 | 
						|
	if (flash->led_mode == mode)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	aw36518_led_on(flash, false);
 | 
						|
 | 
						|
	flash->led_mode = mode;
 | 
						|
 | 
						|
	if (mode == V4L2_FLASH_LED_MODE_FLASH) {
 | 
						|
		ret = aw36518_i2c_write(flash, 0x01, 0x0C);
 | 
						|
		ret |= aw36518_flash_brt(flash, LED0);
 | 
						|
	} else if (mode == V4L2_FLASH_LED_MODE_TORCH) {
 | 
						|
		//ret = aw36518_i2c_write(flash, 0x01, 0x08);
 | 
						|
		/* hw torch/strobe io trigger torch */
 | 
						|
		ret = aw36518_i2c_write(flash, 0x01, AW36518_HW_TORCH);
 | 
						|
		ret |= aw36518_torch_brt(flash, LED0);
 | 
						|
		ret |= aw36518_led_on(flash, true);
 | 
						|
		if (flash->torch_gpio) {
 | 
						|
			v4l2_dbg(1, debug, &flash->leds[id].sd,
 | 
						|
				 "%s:set torch gpio high.\n", __func__);
 | 
						|
			gpiod_set_value_cansleep(flash->torch_gpio, 1);
 | 
						|
		}
 | 
						|
 | 
						|
	} else {
 | 
						|
		ret = aw36518_i2c_write(flash, 0x01, 0x00);
 | 
						|
		if (flash->torch_gpio) {
 | 
						|
			v4l2_dbg(1, debug, &flash->leds[id].sd,
 | 
						|
				 "%s:set torch gpio low.\n", __func__);
 | 
						|
			gpiod_set_value_cansleep(flash->torch_gpio, 0);
 | 
						|
		}
 | 
						|
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_strobe(struct aw36518_flash *flash, bool on)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[0].sd,
 | 
						|
		 "%s: on %d\n", __func__, on);
 | 
						|
 | 
						|
	if (flash->led_mode != V4L2_FLASH_LED_MODE_FLASH)
 | 
						|
		return -EBUSY;
 | 
						|
	ret = aw36518_led_on(flash, on);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_get_ctrl(struct v4l2_ctrl *ctrl, enum aw36518_led_id id)
 | 
						|
{
 | 
						|
	struct aw36518_led *led =
 | 
						|
		container_of(ctrl->handler, struct aw36518_led, ctrls);
 | 
						|
	struct aw36518_flash *flash =
 | 
						|
		container_of(led, struct aw36518_flash, leds[id]);
 | 
						|
	int ret = 0;
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &flash->leds[id].sd,
 | 
						|
		 "%s: id 0x%x\n", __func__, ctrl->id);
 | 
						|
 | 
						|
	mutex_lock(&flash->lock);
 | 
						|
	switch (ctrl->id) {
 | 
						|
	case V4L2_CID_FLASH_FAULT:
 | 
						|
		ret = aw36518_get_fault(flash);
 | 
						|
		ctrl->val = 0;
 | 
						|
		if (ret & AW36518_REG_FL_SC)
 | 
						|
			ctrl->val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
 | 
						|
		if (ret & AW36518_REG_FL_OT)
 | 
						|
			ctrl->val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
 | 
						|
		if (ret & AW36518_REG_FL_TO)
 | 
						|
			ctrl->val |= V4L2_FLASH_FAULT_TIMEOUT;
 | 
						|
		if (ret & AW36518_REG_FL_OVP)
 | 
						|
			ctrl->val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
 | 
						|
		ret = 0;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_err(&client->dev,
 | 
						|
			 "ctrl 0x%x not supported\n", ctrl->id);
 | 
						|
		ret = -EINVAL;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&flash->lock);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_set_ctrl(struct v4l2_ctrl *ctrl, enum aw36518_led_id id)
 | 
						|
{
 | 
						|
	struct aw36518_led *led =
 | 
						|
		container_of(ctrl->handler, struct aw36518_led, ctrls);
 | 
						|
	struct aw36518_flash *flash =
 | 
						|
		container_of(led, struct aw36518_flash, leds[id]);
 | 
						|
	int ret = 0;
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
 | 
						|
	v4l2_dbg(1, debug, &led->sd,
 | 
						|
		 "%s: id 0x%x val 0x%x\n",
 | 
						|
		 __func__, ctrl->id, ctrl->val);
 | 
						|
 | 
						|
	mutex_lock(&flash->lock);
 | 
						|
 | 
						|
	ret = aw36518_get_fault(flash);
 | 
						|
	if ((ret & (AW36518_REG_FL_OVP |
 | 
						|
		     AW36518_REG_FL_OT |
 | 
						|
		     AW36518_REG_FL_SC)) &&
 | 
						|
	    (ctrl->id == V4L2_CID_FLASH_STROBE ||
 | 
						|
	     ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
 | 
						|
	     ctrl->id == V4L2_CID_FLASH_LED_MODE)) {
 | 
						|
		ret = -EBUSY;
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (ctrl->id) {
 | 
						|
	case V4L2_CID_FLASH_LED_MODE:
 | 
						|
		ret = aw36518_set_mode(flash, id, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_FLASH_STROBE:
 | 
						|
		ret = aw36518_strobe(flash, true);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_FLASH_STROBE_STOP:
 | 
						|
		ret = aw36518_strobe(flash, false);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_FLASH_TIMEOUT:
 | 
						|
		ret = aw36518_set_timeout(flash, ctrl->val);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_FLASH_INTENSITY:
 | 
						|
		ret = aw36518_flash_brt(flash, id);
 | 
						|
		break;
 | 
						|
	case V4L2_CID_FLASH_TORCH_INTENSITY:
 | 
						|
		ret = aw36518_torch_brt(flash, id);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_err(&client->dev,
 | 
						|
			"ctrl 0x%x not supported\n", ctrl->id);
 | 
						|
		ret = -EINVAL;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
err:
 | 
						|
	mutex_unlock(&flash->lock);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_led0_get_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	return aw36518_get_ctrl(ctrl, LED0);
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_led0_set_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	return aw36518_set_ctrl(ctrl, LED0);
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_led1_get_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	return aw36518_get_ctrl(ctrl, LED1);
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_led1_set_ctrl(struct v4l2_ctrl *ctrl)
 | 
						|
{
 | 
						|
	return aw36518_set_ctrl(ctrl, LED1);
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_ctrl_ops aw36518_ctrl_ops[LED_MAX] = {
 | 
						|
	[LED0] = {
 | 
						|
		.g_volatile_ctrl = aw36518_led0_get_ctrl,
 | 
						|
		.s_ctrl = aw36518_led0_set_ctrl,
 | 
						|
	},
 | 
						|
	[LED1] = {
 | 
						|
		.g_volatile_ctrl = aw36518_led1_get_ctrl,
 | 
						|
		.s_ctrl = aw36518_led1_set_ctrl,
 | 
						|
	}
 | 
						|
};
 | 
						|
 | 
						|
static int aw36518_init_controls(struct aw36518_flash *flash,
 | 
						|
				 enum aw36518_led_id id)
 | 
						|
{
 | 
						|
	struct v4l2_ctrl *fault;
 | 
						|
	struct v4l2_ctrl_handler *hdl = &flash->leds[id].ctrls;
 | 
						|
	const struct v4l2_ctrl_ops *ops = &aw36518_ctrl_ops[id];
 | 
						|
	struct aw36518_led *led = &flash->leds[id];
 | 
						|
 | 
						|
	v4l2_ctrl_handler_init(hdl, 8);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std_menu(hdl, ops,
 | 
						|
			       V4L2_CID_FLASH_LED_MODE,
 | 
						|
			       V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
 | 
						|
	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 | 
						|
 | 
						|
	v4l2_ctrl_new_std_menu(hdl, ops,
 | 
						|
			       V4L2_CID_FLASH_STROBE_SOURCE,
 | 
						|
			       V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(hdl, ops,
 | 
						|
			  V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(hdl, ops,
 | 
						|
			  V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
 | 
						|
 | 
						|
	v4l2_ctrl_new_std(hdl, ops,
 | 
						|
			  V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
 | 
						|
			  led->max_flash_timeout,
 | 
						|
			  TIMEOUT_STEP,
 | 
						|
			  led->max_flash_timeout);
 | 
						|
	flash->flash_timeout = led->max_flash_timeout;
 | 
						|
 | 
						|
	flash->leds[id].flash_brt =
 | 
						|
		v4l2_ctrl_new_std(hdl, ops,
 | 
						|
				  V4L2_CID_FLASH_INTENSITY,
 | 
						|
				  AW36518_MIN_FLASH_INTENSITY,
 | 
						|
				  led->max_flash_intensity,
 | 
						|
				  AW36518_FLASH_INTENSITY_STEP,
 | 
						|
				  AW36518_FLASH_INTENSITY_DEFAULT);
 | 
						|
 | 
						|
	flash->leds[id].torch_brt =
 | 
						|
		v4l2_ctrl_new_std(hdl, ops,
 | 
						|
				  V4L2_CID_FLASH_TORCH_INTENSITY,
 | 
						|
				  AW36518_MIN_TORCH_INTENSITY,
 | 
						|
				  led->max_torch_intensity,
 | 
						|
				  AW36518_TORCH_INTENSITY_STEP,
 | 
						|
				  AW36518_TORCH_INTENSITY_DEFAULT);
 | 
						|
 | 
						|
	fault = v4l2_ctrl_new_std(hdl, ops,
 | 
						|
				  V4L2_CID_FLASH_FAULT, 0,
 | 
						|
				  V4L2_FLASH_FAULT_OVER_VOLTAGE
 | 
						|
				  | V4L2_FLASH_FAULT_TIMEOUT
 | 
						|
				  | V4L2_FLASH_FAULT_OVER_TEMPERATURE
 | 
						|
				  | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
 | 
						|
 | 
						|
	if (hdl->error)
 | 
						|
		return hdl->error;
 | 
						|
 | 
						|
	fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
 | 
						|
 | 
						|
	flash->leds[id].sd.ctrl_handler = hdl;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void aw36518_get_time_info(struct v4l2_subdev *sd,
 | 
						|
				  struct __kernel_old_timeval *ti)
 | 
						|
{
 | 
						|
	struct aw36518_led *led =
 | 
						|
		container_of(sd, struct aw36518_led, sd);
 | 
						|
 | 
						|
	memset(ti, 0, sizeof(*ti));
 | 
						|
	ti->tv_sec = led->timestamp.tv_sec;
 | 
						|
	ti->tv_usec = led->timestamp.tv_usec;
 | 
						|
	v4l2_dbg(1, debug, sd,
 | 
						|
		 "%s: tv_sec:%ld, tv_usec:%ld\n", __func__, ti->tv_sec, ti->tv_usec);
 | 
						|
}
 | 
						|
 | 
						|
static long aw36518_ioctl(struct v4l2_subdev *sd,
 | 
						|
			 unsigned int cmd, void *arg)
 | 
						|
{
 | 
						|
	long ret = 0;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case RK_VIDIOC_FLASH_TIMEINFO:
 | 
						|
		aw36518_get_time_info(sd, (struct __kernel_old_timeval *)arg);
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		ret = -ENOIOCTLCMD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_COMPAT
 | 
						|
#define RK_VIDIOC_COMPAT_FLASH_TIMEINFO \
 | 
						|
	_IOR('V', BASE_VIDIOC_PRIVATE + 0, struct old_timeval32)
 | 
						|
 | 
						|
static long aw36518_compat_ioctl32(struct v4l2_subdev *sd,
 | 
						|
				  unsigned int cmd,
 | 
						|
				  unsigned long arg)
 | 
						|
{
 | 
						|
	void __user *up = compat_ptr(arg);
 | 
						|
	struct old_timeval32 *compat_t;
 | 
						|
	long ret;
 | 
						|
	struct __kernel_old_timeval t;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case RK_VIDIOC_COMPAT_FLASH_TIMEINFO:
 | 
						|
		compat_t = kzalloc(sizeof(*compat_t), GFP_KERNEL);
 | 
						|
		if (!compat_t) {
 | 
						|
			ret = -ENOMEM;
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
		ret = aw36518_ioctl(sd, RK_VIDIOC_FLASH_TIMEINFO, &t);
 | 
						|
		if (!ret) {
 | 
						|
			compat_t->tv_sec = t.tv_sec;
 | 
						|
			compat_t->tv_usec = t.tv_usec;
 | 
						|
			ret = copy_to_user(up, compat_t, sizeof(*compat_t));
 | 
						|
			if (ret)
 | 
						|
				ret = -EFAULT;
 | 
						|
		}
 | 
						|
		kfree(compat_t);
 | 
						|
		break;
 | 
						|
 | 
						|
	default:
 | 
						|
		ret = -ENOIOCTLCMD;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
static int aw36518_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 | 
						|
{
 | 
						|
	int rval;
 | 
						|
 | 
						|
	rval = pm_runtime_get_sync(sd->dev);
 | 
						|
	if (rval < 0) {
 | 
						|
		pm_runtime_put_noidle(sd->dev);
 | 
						|
		return rval;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 | 
						|
{
 | 
						|
	pm_runtime_put(sd->dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_s_power(struct v4l2_subdev *sd, int on)
 | 
						|
{
 | 
						|
	struct aw36518_led *led = to_led(sd);
 | 
						|
	struct aw36518_flash *flash =
 | 
						|
		container_of(led, struct aw36518_flash, leds[0]);
 | 
						|
	int ret = 0;
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
 | 
						|
	dev_info(&client->dev, "%s on(%d)\n", __func__, on);
 | 
						|
	mutex_lock(&flash->lock);
 | 
						|
 | 
						|
	/* If the power state is not modified - no work to do. */
 | 
						|
	if (flash->power_on == !!on)
 | 
						|
		goto unlock_and_return;
 | 
						|
 | 
						|
	if (on) {
 | 
						|
		ret = pm_runtime_get_sync(&client->dev);
 | 
						|
		if (ret < 0) {
 | 
						|
			pm_runtime_put_noidle(&client->dev);
 | 
						|
			goto unlock_and_return;
 | 
						|
		}
 | 
						|
		flash->power_on = true;
 | 
						|
	} else {
 | 
						|
		pm_runtime_put(&client->dev);
 | 
						|
		flash->power_on = false;
 | 
						|
	}
 | 
						|
 | 
						|
unlock_and_return:
 | 
						|
	mutex_unlock(&flash->lock);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct v4l2_subdev_core_ops aw36518_core_ops = {
 | 
						|
	.s_power = aw36518_s_power,
 | 
						|
	.ioctl = aw36518_ioctl,
 | 
						|
#ifdef CONFIG_COMPAT
 | 
						|
	.compat_ioctl32 = aw36518_compat_ioctl32
 | 
						|
#endif
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_ops aw36518_ops = {
 | 
						|
	.core = &aw36518_core_ops,
 | 
						|
};
 | 
						|
 | 
						|
static const struct v4l2_subdev_internal_ops aw36518_internal_ops = {
 | 
						|
	.open = aw36518_open,
 | 
						|
	.close = aw36518_close,
 | 
						|
};
 | 
						|
 | 
						|
static int __aw36518_set_power(struct aw36518_flash *flash, bool on)
 | 
						|
{
 | 
						|
	gpiod_direction_output(flash->en_gpio, on);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_check_id(struct aw36518_flash *flash)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	__aw36518_set_power(flash, true);
 | 
						|
	ret = aw36518_i2c_read(flash, AW36518_REG_ID);
 | 
						|
	if (ret != AW36518_ID) {
 | 
						|
		dev_err(&flash->client->dev,
 | 
						|
			"Read chip id error\n");
 | 
						|
		return -ENODEV;
 | 
						|
	}
 | 
						|
 | 
						|
	dev_info(&flash->client->dev,
 | 
						|
		 "Detected aw36518 flash id:0x%x\n", ret);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_of_init(struct i2c_client *client,
 | 
						|
			   struct aw36518_flash *flash)
 | 
						|
{
 | 
						|
	struct device_node *node = client->dev.of_node;
 | 
						|
	struct device_node *child;
 | 
						|
	struct aw36518_led *led;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (!node) {
 | 
						|
		dev_err(&client->dev,
 | 
						|
			"get device node failed\n");
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = of_property_read_u32(node,
 | 
						|
				   RKMODULE_CAMERA_MODULE_INDEX,
 | 
						|
				   &flash->module_index);
 | 
						|
	ret |= of_property_read_string(node,
 | 
						|
				       RKMODULE_CAMERA_MODULE_FACING,
 | 
						|
				       &flash->module_facing);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&client->dev,
 | 
						|
			"could not get module information!\n");
 | 
						|
		goto err;
 | 
						|
	}
 | 
						|
 | 
						|
	flash->en_gpio = devm_gpiod_get(&client->dev,
 | 
						|
					"enable", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(flash->en_gpio)) {
 | 
						|
		flash->en_gpio = NULL;
 | 
						|
		dev_warn(&client->dev,
 | 
						|
			 "get enable-gpio failed, using assist light mode\n");
 | 
						|
	}
 | 
						|
 | 
						|
	flash->torch_gpio = devm_gpiod_get(&client->dev,
 | 
						|
					   "torch", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(flash->torch_gpio)) {
 | 
						|
		flash->torch_gpio = NULL;
 | 
						|
		dev_warn(&client->dev,
 | 
						|
			 "get torch-gpio failed, using assist light mode\n");
 | 
						|
	}
 | 
						|
 | 
						|
	flash->strobe_gpio = devm_gpiod_get(&client->dev,
 | 
						|
					    "strobe", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(flash->strobe_gpio)) {
 | 
						|
		flash->strobe_gpio = NULL;
 | 
						|
		dev_warn(&client->dev,
 | 
						|
			 "get strobe-gpio failed, using assist light mode\n");
 | 
						|
 | 
						|
	}
 | 
						|
	flash->tx_gpio = devm_gpiod_get(&client->dev,
 | 
						|
					    "tx", GPIOD_OUT_LOW);
 | 
						|
	if (IS_ERR(flash->tx_gpio)) {
 | 
						|
		flash->tx_gpio = NULL;
 | 
						|
		dev_warn(&client->dev,
 | 
						|
			 "get tx-gpio failed, using assist light mode\n");
 | 
						|
	}
 | 
						|
 | 
						|
	for_each_child_of_node(node, child) {
 | 
						|
		u32 id = 0;
 | 
						|
 | 
						|
		of_property_read_u32(child, "reg", &id);
 | 
						|
		if (id >= LED_MAX) {
 | 
						|
			dev_err(&client->dev, "only support 2 leds\n");
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		led = &flash->leds[id];
 | 
						|
		led->sd.fwnode = of_fwnode_handle(child);
 | 
						|
		if (of_property_read_u32(child, "flash-max-timeout-us",
 | 
						|
					 &led->max_flash_timeout)) {
 | 
						|
			dev_err(&client->dev,
 | 
						|
				"get led%d flash-max-timeout-us fail\n", id);
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		if (led->max_flash_timeout > TIMEOUT_MAX)
 | 
						|
			led->max_flash_timeout = TIMEOUT_MAX;
 | 
						|
 | 
						|
		if (of_property_read_u32(child, "flash-max-microamp",
 | 
						|
					 &led->max_flash_intensity)) {
 | 
						|
			dev_err(&client->dev,
 | 
						|
				"get led%d flash-max-microamp fail\n", id);
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		if (led->max_flash_intensity > AW36518_MAX_FLASH_INTENSITY)
 | 
						|
			led->max_flash_intensity = AW36518_MAX_FLASH_INTENSITY;
 | 
						|
 | 
						|
		if (of_property_read_u32(child, "led-max-microamp",
 | 
						|
					  &led->max_torch_intensity)) {
 | 
						|
			dev_err(&client->dev,
 | 
						|
				"get led%d led-max-microamp fail\n", id);
 | 
						|
			goto err;
 | 
						|
		}
 | 
						|
		if (led->max_torch_intensity > AW36518_MAX_TORCH_INTENSITY)
 | 
						|
			led->max_torch_intensity = AW36518_MAX_TORCH_INTENSITY;
 | 
						|
 | 
						|
		v4l2_dbg(1, debug, &led->sd,
 | 
						|
			 "led%d max torch:%dUA flash:%dUA timeout:%dUS\n",
 | 
						|
			 id, led->max_torch_intensity,
 | 
						|
			 led->max_flash_intensity,
 | 
						|
			 led->max_flash_timeout);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
err:
 | 
						|
	return -EINVAL;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_init_device(struct aw36518_flash *flash)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	unsigned int reg_val;
 | 
						|
	struct i2c_client *client = flash->client;
 | 
						|
 | 
						|
	/* output disable */
 | 
						|
	flash->led_mode = V4L2_FLASH_LED_MODE_NONE;
 | 
						|
	ret = aw36518_set_mode(flash, 0, 0);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
	/* reset faults */
 | 
						|
	reg_val = aw36518_i2c_read(flash, AW36518_REG_FAULT);
 | 
						|
	dev_info(&client->dev, "%s: fault: 0x%x.\n", __func__, reg_val);
 | 
						|
	/* tx input default low */
 | 
						|
	if (flash->tx_gpio)
 | 
						|
		gpiod_direction_output(flash->tx_gpio, 0);
 | 
						|
	/* STROBE/Torch input default low */
 | 
						|
	if (flash->torch_gpio)
 | 
						|
		gpiod_set_value_cansleep(flash->torch_gpio, 0);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int aw36518_probe(struct i2c_client *client,
 | 
						|
			 const struct i2c_device_id *devid)
 | 
						|
{
 | 
						|
	struct aw36518_flash *flash;
 | 
						|
	struct v4l2_subdev *sd;
 | 
						|
	char facing[2];
 | 
						|
	int i, ret;
 | 
						|
 | 
						|
	dev_info(&client->dev, "driver version: %02x.%02x.%02x",
 | 
						|
		 DRIVER_VERSION >> 16,
 | 
						|
		 (DRIVER_VERSION & 0xff00) >> 8,
 | 
						|
		 DRIVER_VERSION & 0x00ff);
 | 
						|
 | 
						|
	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
 | 
						|
	if (!flash)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	flash->client = client;
 | 
						|
 | 
						|
	ret = aw36518_of_init(client, flash);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = aw36518_check_id(flash);
 | 
						|
	if (ret)
 | 
						|
		goto err_power_off;
 | 
						|
 | 
						|
	for (i = 0; i < LED_MAX; i++) {
 | 
						|
		sd = &flash->leds[i].sd;
 | 
						|
		v4l2_i2c_subdev_init(sd, client, &aw36518_ops);
 | 
						|
		sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
 | 
						|
		sd->internal_ops = &aw36518_internal_ops;
 | 
						|
 | 
						|
		memset(facing, 0, sizeof(facing));
 | 
						|
		if (strcmp(flash->module_facing, "back") == 0)
 | 
						|
			facing[0] = 'b';
 | 
						|
		else
 | 
						|
			facing[0] = 'f';
 | 
						|
		/* NOTE: to distinguish between two led
 | 
						|
		 * name: led0 meet the main led
 | 
						|
		 * name: led1 meet the secondary led
 | 
						|
		 */
 | 
						|
		snprintf(sd->name, sizeof(sd->name),
 | 
						|
			 "m%02d_%s_%s_led%d %s",
 | 
						|
			 flash->module_index, facing,
 | 
						|
			 AW36518_NAME, i, dev_name(sd->dev));
 | 
						|
 | 
						|
		ret = aw36518_init_controls(flash, i);
 | 
						|
		if (ret)
 | 
						|
			goto err;
 | 
						|
 | 
						|
		ret = media_entity_pads_init(&sd->entity, 0, NULL);
 | 
						|
		if (ret < 0)
 | 
						|
			goto free_ctl;
 | 
						|
 | 
						|
		sd->entity.function = MEDIA_ENT_F_FLASH;
 | 
						|
		ret = v4l2_async_register_subdev(sd);
 | 
						|
		if (ret)
 | 
						|
			goto free_media;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = aw36518_init_device(flash);
 | 
						|
	if (ret < 0)
 | 
						|
		goto free_media;
 | 
						|
 | 
						|
	i2c_set_clientdata(client, flash);
 | 
						|
 | 
						|
	mutex_init(&flash->lock);
 | 
						|
 | 
						|
	pm_runtime_set_active(&client->dev);
 | 
						|
	pm_runtime_enable(&client->dev);
 | 
						|
	pm_runtime_idle(&client->dev);
 | 
						|
 | 
						|
	dev_info(&client->dev, "probing successful\n");
 | 
						|
 | 
						|
	return 0;
 | 
						|
free_media:
 | 
						|
	media_entity_cleanup(&flash->leds[i].sd.entity);
 | 
						|
free_ctl:
 | 
						|
	v4l2_ctrl_handler_free(&flash->leds[i].ctrls);
 | 
						|
err:
 | 
						|
	for (--i; i >= 0; --i) {
 | 
						|
		v4l2_device_unregister_subdev(&flash->leds[i].sd);
 | 
						|
		media_entity_cleanup(&flash->leds[i].sd.entity);
 | 
						|
		v4l2_ctrl_handler_free(&flash->leds[i].ctrls);
 | 
						|
	}
 | 
						|
err_power_off:
 | 
						|
	__aw36518_set_power(flash, false);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void aw36518_remove(struct i2c_client *client)
 | 
						|
{
 | 
						|
	struct aw36518_flash *flash = i2c_get_clientdata(client);
 | 
						|
	unsigned int i;
 | 
						|
 | 
						|
	pm_runtime_disable(&client->dev);
 | 
						|
	for (i = 0; i < LED_MAX; i++) {
 | 
						|
		v4l2_device_unregister_subdev(&flash->leds[i].sd);
 | 
						|
		v4l2_ctrl_handler_free(&flash->leds[i].ctrls);
 | 
						|
		media_entity_cleanup(&flash->leds[i].sd.entity);
 | 
						|
	}
 | 
						|
	mutex_destroy(&flash->lock);
 | 
						|
}
 | 
						|
 | 
						|
static int __maybe_unused aw36518_runtime_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct aw36518_flash *flash = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	return __aw36518_set_power(flash, false);
 | 
						|
}
 | 
						|
 | 
						|
static int __maybe_unused aw36518_runtime_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct i2c_client *client = to_i2c_client(dev);
 | 
						|
	struct aw36518_flash *flash = i2c_get_clientdata(client);
 | 
						|
 | 
						|
	return __aw36518_set_power(flash, true);
 | 
						|
}
 | 
						|
 | 
						|
static const struct i2c_device_id aw36518_id_table[] = {
 | 
						|
	{ AW36518_NAME, 0 },
 | 
						|
	{ { 0 } }
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(i2c, aw36518_id_table);
 | 
						|
 | 
						|
static const struct of_device_id aw36518_of_table[] = {
 | 
						|
	{ .compatible = "awinic,aw36518" },
 | 
						|
	{ { 0 } }
 | 
						|
};
 | 
						|
 | 
						|
static const struct dev_pm_ops aw36518_pm_ops = {
 | 
						|
	SET_RUNTIME_PM_OPS(aw36518_runtime_suspend,
 | 
						|
			   aw36518_runtime_resume, NULL)
 | 
						|
};
 | 
						|
 | 
						|
static struct i2c_driver aw36518_i2c_driver = {
 | 
						|
	.driver	= {
 | 
						|
		.name = AW36518_NAME,
 | 
						|
		.pm = &aw36518_pm_ops,
 | 
						|
		.of_match_table = aw36518_of_table,
 | 
						|
	},
 | 
						|
	.probe = aw36518_probe,
 | 
						|
	.remove	= aw36518_remove,
 | 
						|
	.id_table = aw36518_id_table,
 | 
						|
};
 | 
						|
 | 
						|
module_i2c_driver(aw36518_i2c_driver);
 | 
						|
 | 
						|
MODULE_DESCRIPTION("AW36518 LED flash driver");
 | 
						|
MODULE_LICENSE("GPL");
 |