6841 lines
		
	
	
		
			176 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			6841 lines
		
	
	
		
			176 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * drxk_hard: DRX-K DVB-C/T demodulator driver
 | |
|  *
 | |
|  * Copyright (C) 2010-2011 Digital Devices GmbH
 | |
|  */
 | |
| 
 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/firmware.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/hardirq.h>
 | |
| #include <asm/div64.h>
 | |
| 
 | |
| #include <media/dvb_frontend.h>
 | |
| #include "drxk.h"
 | |
| #include "drxk_hard.h"
 | |
| #include <media/dvb_math.h>
 | |
| 
 | |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode);
 | |
| static int power_down_qam(struct drxk_state *state);
 | |
| static int set_dvbt_standard(struct drxk_state *state,
 | |
| 			   enum operation_mode o_mode);
 | |
| static int set_qam_standard(struct drxk_state *state,
 | |
| 			  enum operation_mode o_mode);
 | |
| static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz,
 | |
| 		  s32 tuner_freq_offset);
 | |
| static int set_dvbt_standard(struct drxk_state *state,
 | |
| 			   enum operation_mode o_mode);
 | |
| static int dvbt_start(struct drxk_state *state);
 | |
| static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
 | |
| 		   s32 tuner_freq_offset);
 | |
| static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status);
 | |
| static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status);
 | |
| static int switch_antenna_to_qam(struct drxk_state *state);
 | |
| static int switch_antenna_to_dvbt(struct drxk_state *state);
 | |
| 
 | |
| static bool is_dvbt(struct drxk_state *state)
 | |
| {
 | |
| 	return state->m_operation_mode == OM_DVBT;
 | |
| }
 | |
| 
 | |
| static bool is_qam(struct drxk_state *state)
 | |
| {
 | |
| 	return state->m_operation_mode == OM_QAM_ITU_A ||
 | |
| 	    state->m_operation_mode == OM_QAM_ITU_B ||
 | |
| 	    state->m_operation_mode == OM_QAM_ITU_C;
 | |
| }
 | |
| 
 | |
| #define NOA1ROM 0
 | |
| 
 | |
| #define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0)
 | |
| #define DRXDAP_FASI_LONG_FORMAT(addr)  (((addr) & 0xFC30FF80) != 0)
 | |
| 
 | |
| #define DEFAULT_MER_83  165
 | |
| #define DEFAULT_MER_93  250
 | |
| 
 | |
| #ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH
 | |
| #define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH
 | |
| #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03)
 | |
| #endif
 | |
| 
 | |
| #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700
 | |
| #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500
 | |
| 
 | |
| #ifndef DRXK_KI_RAGC_ATV
 | |
| #define DRXK_KI_RAGC_ATV   4
 | |
| #endif
 | |
| #ifndef DRXK_KI_IAGC_ATV
 | |
| #define DRXK_KI_IAGC_ATV   6
 | |
| #endif
 | |
| #ifndef DRXK_KI_DAGC_ATV
 | |
| #define DRXK_KI_DAGC_ATV   7
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_KI_RAGC_QAM
 | |
| #define DRXK_KI_RAGC_QAM   3
 | |
| #endif
 | |
| #ifndef DRXK_KI_IAGC_QAM
 | |
| #define DRXK_KI_IAGC_QAM   4
 | |
| #endif
 | |
| #ifndef DRXK_KI_DAGC_QAM
 | |
| #define DRXK_KI_DAGC_QAM   7
 | |
| #endif
 | |
| #ifndef DRXK_KI_RAGC_DVBT
 | |
| #define DRXK_KI_RAGC_DVBT  (IsA1WithPatchCode(state) ? 3 : 2)
 | |
| #endif
 | |
| #ifndef DRXK_KI_IAGC_DVBT
 | |
| #define DRXK_KI_IAGC_DVBT  (IsA1WithPatchCode(state) ? 4 : 2)
 | |
| #endif
 | |
| #ifndef DRXK_KI_DAGC_DVBT
 | |
| #define DRXK_KI_DAGC_DVBT  (IsA1WithPatchCode(state) ? 10 : 7)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_AGC_DAC_OFFSET
 | |
| #define DRXK_AGC_DAC_OFFSET (0x800)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ
 | |
| #define DRXK_BANDWIDTH_8MHZ_IN_HZ  (0x8B8249L)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ
 | |
| #define DRXK_BANDWIDTH_7MHZ_IN_HZ  (0x7A1200L)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ
 | |
| #define DRXK_BANDWIDTH_6MHZ_IN_HZ  (0x68A1B6L)
 | |
| #endif
 | |
| 
 | |
| #ifndef DRXK_QAM_SYMBOLRATE_MAX
 | |
| #define DRXK_QAM_SYMBOLRATE_MAX         (7233000)
 | |
| #endif
 | |
| 
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_DVBT    56
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_A   64
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_C   0x5FE0
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_BG      24
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_DKILLP  32
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_NTSC    40
 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_FM      48
 | |
| #define DRXK_BL_ROM_OFFSET_UCODE        0
 | |
| 
 | |
| #define DRXK_BLC_TIMEOUT                100
 | |
| 
 | |
| #define DRXK_BLCC_NR_ELEMENTS_TAPS      2
 | |
| #define DRXK_BLCC_NR_ELEMENTS_UCODE     6
 | |
| 
 | |
| #define DRXK_BLDC_NR_ELEMENTS_TAPS      28
 | |
| 
 | |
| #ifndef DRXK_OFDM_NE_NOTCH_WIDTH
 | |
| #define DRXK_OFDM_NE_NOTCH_WIDTH             (4)
 | |
| #endif
 | |
| 
 | |
| #define DRXK_QAM_SL_SIG_POWER_QAM16       (40960)
 | |
| #define DRXK_QAM_SL_SIG_POWER_QAM32       (20480)
 | |
| #define DRXK_QAM_SL_SIG_POWER_QAM64       (43008)
 | |
| #define DRXK_QAM_SL_SIG_POWER_QAM128      (20992)
 | |
| #define DRXK_QAM_SL_SIG_POWER_QAM256      (43520)
 | |
| 
 | |
| static unsigned int debug;
 | |
| module_param(debug, int, 0644);
 | |
| MODULE_PARM_DESC(debug, "enable debug messages");
 | |
| 
 | |
| #define dprintk(level, fmt, arg...) do {				\
 | |
| if (debug >= level)							\
 | |
| 	printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg);	\
 | |
| } while (0)
 | |
| 
 | |
| static inline u32 Frac28a(u32 a, u32 c)
 | |
| {
 | |
| 	int i = 0;
 | |
| 	u32 Q1 = 0;
 | |
| 	u32 R0 = 0;
 | |
| 
 | |
| 	R0 = (a % c) << 4;	/* 32-28 == 4 shifts possible at max */
 | |
| 	Q1 = a / c;		/*
 | |
| 				 * integer part, only the 4 least significant
 | |
| 				 * bits will be visible in the result
 | |
| 				 */
 | |
| 
 | |
| 	/* division using radix 16, 7 nibbles in the result */
 | |
| 	for (i = 0; i < 7; i++) {
 | |
| 		Q1 = (Q1 << 4) | (R0 / c);
 | |
| 		R0 = (R0 % c) << 4;
 | |
| 	}
 | |
| 	/* rounding */
 | |
| 	if ((R0 >> 3) >= c)
 | |
| 		Q1++;
 | |
| 
 | |
| 	return Q1;
 | |
| }
 | |
| 
 | |
| static inline u32 log10times100(u32 value)
 | |
| {
 | |
| 	return (100L * intlog10(value)) >> 24;
 | |
| }
 | |
| 
 | |
| /***************************************************************************/
 | |
| /* I2C **********************************************************************/
 | |
| /***************************************************************************/
 | |
| 
 | |
| static int drxk_i2c_lock(struct drxk_state *state)
 | |
| {
 | |
| 	i2c_lock_bus(state->i2c, I2C_LOCK_SEGMENT);
 | |
| 	state->drxk_i2c_exclusive_lock = true;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void drxk_i2c_unlock(struct drxk_state *state)
 | |
| {
 | |
| 	if (!state->drxk_i2c_exclusive_lock)
 | |
| 		return;
 | |
| 
 | |
| 	i2c_unlock_bus(state->i2c, I2C_LOCK_SEGMENT);
 | |
| 	state->drxk_i2c_exclusive_lock = false;
 | |
| }
 | |
| 
 | |
| static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs,
 | |
| 			     unsigned len)
 | |
| {
 | |
| 	if (state->drxk_i2c_exclusive_lock)
 | |
| 		return __i2c_transfer(state->i2c, msgs, len);
 | |
| 	else
 | |
| 		return i2c_transfer(state->i2c, msgs, len);
 | |
| }
 | |
| 
 | |
| static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val)
 | |
| {
 | |
| 	struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD,
 | |
| 				    .buf = val, .len = 1}
 | |
| 	};
 | |
| 
 | |
| 	return drxk_i2c_transfer(state, msgs, 1);
 | |
| }
 | |
| 
 | |
| static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len)
 | |
| {
 | |
| 	int status;
 | |
| 	struct i2c_msg msg = {
 | |
| 	    .addr = adr, .flags = 0, .buf = data, .len = len };
 | |
| 
 | |
| 	dprintk(3, ":");
 | |
| 	if (debug > 2) {
 | |
| 		int i;
 | |
| 		for (i = 0; i < len; i++)
 | |
| 			pr_cont(" %02x", data[i]);
 | |
| 		pr_cont("\n");
 | |
| 	}
 | |
| 	status = drxk_i2c_transfer(state, &msg, 1);
 | |
| 	if (status >= 0 && status != 1)
 | |
| 		status = -EIO;
 | |
| 
 | |
| 	if (status < 0)
 | |
| 		pr_err("i2c write error at addr 0x%02x\n", adr);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int i2c_read(struct drxk_state *state,
 | |
| 		    u8 adr, u8 *msg, int len, u8 *answ, int alen)
 | |
| {
 | |
| 	int status;
 | |
| 	struct i2c_msg msgs[2] = {
 | |
| 		{.addr = adr, .flags = 0,
 | |
| 				    .buf = msg, .len = len},
 | |
| 		{.addr = adr, .flags = I2C_M_RD,
 | |
| 		 .buf = answ, .len = alen}
 | |
| 	};
 | |
| 
 | |
| 	status = drxk_i2c_transfer(state, msgs, 2);
 | |
| 	if (status != 2) {
 | |
| 		if (debug > 2)
 | |
| 			pr_cont(": ERROR!\n");
 | |
| 		if (status >= 0)
 | |
| 			status = -EIO;
 | |
| 
 | |
| 		pr_err("i2c read error at addr 0x%02x\n", adr);
 | |
| 		return status;
 | |
| 	}
 | |
| 	if (debug > 2) {
 | |
| 		int i;
 | |
| 		dprintk(2, ": read from");
 | |
| 		for (i = 0; i < len; i++)
 | |
| 			pr_cont(" %02x", msg[i]);
 | |
| 		pr_cont(", value = ");
 | |
| 		for (i = 0; i < alen; i++)
 | |
| 			pr_cont(" %02x", answ[i]);
 | |
| 		pr_cont("\n");
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags)
 | |
| {
 | |
| 	int status;
 | |
| 	u8 adr = state->demod_address, mm1[4], mm2[2], len;
 | |
| 
 | |
| 	if (state->single_master)
 | |
| 		flags |= 0xC0;
 | |
| 
 | |
| 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 | |
| 		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
 | |
| 		mm1[1] = ((reg >> 16) & 0xFF);
 | |
| 		mm1[2] = ((reg >> 24) & 0xFF) | flags;
 | |
| 		mm1[3] = ((reg >> 7) & 0xFF);
 | |
| 		len = 4;
 | |
| 	} else {
 | |
| 		mm1[0] = ((reg << 1) & 0xFF);
 | |
| 		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
 | |
| 		len = 2;
 | |
| 	}
 | |
| 	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
 | |
| 	status = i2c_read(state, adr, mm1, len, mm2, 2);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 	if (data)
 | |
| 		*data = mm2[0] | (mm2[1] << 8);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int read16(struct drxk_state *state, u32 reg, u16 *data)
 | |
| {
 | |
| 	return read16_flags(state, reg, data, 0);
 | |
| }
 | |
| 
 | |
| static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags)
 | |
| {
 | |
| 	int status;
 | |
| 	u8 adr = state->demod_address, mm1[4], mm2[4], len;
 | |
| 
 | |
| 	if (state->single_master)
 | |
| 		flags |= 0xC0;
 | |
| 
 | |
| 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 | |
| 		mm1[0] = (((reg << 1) & 0xFF) | 0x01);
 | |
| 		mm1[1] = ((reg >> 16) & 0xFF);
 | |
| 		mm1[2] = ((reg >> 24) & 0xFF) | flags;
 | |
| 		mm1[3] = ((reg >> 7) & 0xFF);
 | |
| 		len = 4;
 | |
| 	} else {
 | |
| 		mm1[0] = ((reg << 1) & 0xFF);
 | |
| 		mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
 | |
| 		len = 2;
 | |
| 	}
 | |
| 	dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags);
 | |
| 	status = i2c_read(state, adr, mm1, len, mm2, 4);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 	if (data)
 | |
| 		*data = mm2[0] | (mm2[1] << 8) |
 | |
| 		    (mm2[2] << 16) | (mm2[3] << 24);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int read32(struct drxk_state *state, u32 reg, u32 *data)
 | |
| {
 | |
| 	return read32_flags(state, reg, data, 0);
 | |
| }
 | |
| 
 | |
| static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags)
 | |
| {
 | |
| 	u8 adr = state->demod_address, mm[6], len;
 | |
| 
 | |
| 	if (state->single_master)
 | |
| 		flags |= 0xC0;
 | |
| 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 | |
| 		mm[0] = (((reg << 1) & 0xFF) | 0x01);
 | |
| 		mm[1] = ((reg >> 16) & 0xFF);
 | |
| 		mm[2] = ((reg >> 24) & 0xFF) | flags;
 | |
| 		mm[3] = ((reg >> 7) & 0xFF);
 | |
| 		len = 4;
 | |
| 	} else {
 | |
| 		mm[0] = ((reg << 1) & 0xFF);
 | |
| 		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
 | |
| 		len = 2;
 | |
| 	}
 | |
| 	mm[len] = data & 0xff;
 | |
| 	mm[len + 1] = (data >> 8) & 0xff;
 | |
| 
 | |
| 	dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags);
 | |
| 	return i2c_write(state, adr, mm, len + 2);
 | |
| }
 | |
| 
 | |
| static int write16(struct drxk_state *state, u32 reg, u16 data)
 | |
| {
 | |
| 	return write16_flags(state, reg, data, 0);
 | |
| }
 | |
| 
 | |
| static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags)
 | |
| {
 | |
| 	u8 adr = state->demod_address, mm[8], len;
 | |
| 
 | |
| 	if (state->single_master)
 | |
| 		flags |= 0xC0;
 | |
| 	if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) {
 | |
| 		mm[0] = (((reg << 1) & 0xFF) | 0x01);
 | |
| 		mm[1] = ((reg >> 16) & 0xFF);
 | |
| 		mm[2] = ((reg >> 24) & 0xFF) | flags;
 | |
| 		mm[3] = ((reg >> 7) & 0xFF);
 | |
| 		len = 4;
 | |
| 	} else {
 | |
| 		mm[0] = ((reg << 1) & 0xFF);
 | |
| 		mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0));
 | |
| 		len = 2;
 | |
| 	}
 | |
| 	mm[len] = data & 0xff;
 | |
| 	mm[len + 1] = (data >> 8) & 0xff;
 | |
| 	mm[len + 2] = (data >> 16) & 0xff;
 | |
| 	mm[len + 3] = (data >> 24) & 0xff;
 | |
| 	dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags);
 | |
| 
 | |
| 	return i2c_write(state, adr, mm, len + 4);
 | |
| }
 | |
| 
 | |
| static int write32(struct drxk_state *state, u32 reg, u32 data)
 | |
| {
 | |
| 	return write32_flags(state, reg, data, 0);
 | |
| }
 | |
| 
 | |
| static int write_block(struct drxk_state *state, u32 address,
 | |
| 		      const int block_size, const u8 p_block[])
 | |
| {
 | |
| 	int status = 0, blk_size = block_size;
 | |
| 	u8 flags = 0;
 | |
| 
 | |
| 	if (state->single_master)
 | |
| 		flags |= 0xC0;
 | |
| 
 | |
| 	while (blk_size > 0) {
 | |
| 		int chunk = blk_size > state->m_chunk_size ?
 | |
| 		    state->m_chunk_size : blk_size;
 | |
| 		u8 *adr_buf = &state->chunk[0];
 | |
| 		u32 adr_length = 0;
 | |
| 
 | |
| 		if (DRXDAP_FASI_LONG_FORMAT(address) || (flags != 0)) {
 | |
| 			adr_buf[0] = (((address << 1) & 0xFF) | 0x01);
 | |
| 			adr_buf[1] = ((address >> 16) & 0xFF);
 | |
| 			adr_buf[2] = ((address >> 24) & 0xFF);
 | |
| 			adr_buf[3] = ((address >> 7) & 0xFF);
 | |
| 			adr_buf[2] |= flags;
 | |
| 			adr_length = 4;
 | |
| 			if (chunk == state->m_chunk_size)
 | |
| 				chunk -= 2;
 | |
| 		} else {
 | |
| 			adr_buf[0] = ((address << 1) & 0xFF);
 | |
| 			adr_buf[1] = (((address >> 16) & 0x0F) |
 | |
| 				     ((address >> 18) & 0xF0));
 | |
| 			adr_length = 2;
 | |
| 		}
 | |
| 		memcpy(&state->chunk[adr_length], p_block, chunk);
 | |
| 		dprintk(2, "(0x%08x, 0x%02x)\n", address, flags);
 | |
| 		if (debug > 1) {
 | |
| 			int i;
 | |
| 			if (p_block)
 | |
| 				for (i = 0; i < chunk; i++)
 | |
| 					pr_cont(" %02x", p_block[i]);
 | |
| 			pr_cont("\n");
 | |
| 		}
 | |
| 		status = i2c_write(state, state->demod_address,
 | |
| 				   &state->chunk[0], chunk + adr_length);
 | |
| 		if (status < 0) {
 | |
| 			pr_err("%s: i2c write error at addr 0x%02x\n",
 | |
| 			       __func__, address);
 | |
| 			break;
 | |
| 		}
 | |
| 		p_block += chunk;
 | |
| 		address += (chunk >> 1);
 | |
| 		blk_size -= chunk;
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| #ifndef DRXK_MAX_RETRIES_POWERUP
 | |
| #define DRXK_MAX_RETRIES_POWERUP 20
 | |
| #endif
 | |
| 
 | |
| static int power_up_device(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 	u8 data = 0;
 | |
| 	u16 retry_count = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	status = i2c_read1(state, state->demod_address, &data);
 | |
| 	if (status < 0) {
 | |
| 		do {
 | |
| 			data = 0;
 | |
| 			status = i2c_write(state, state->demod_address,
 | |
| 					   &data, 1);
 | |
| 			usleep_range(10000, 11000);
 | |
| 			retry_count++;
 | |
| 			if (status < 0)
 | |
| 				continue;
 | |
| 			status = i2c_read1(state, state->demod_address,
 | |
| 					   &data);
 | |
| 		} while (status < 0 &&
 | |
| 			 (retry_count < DRXK_MAX_RETRIES_POWERUP));
 | |
| 		if (status < 0 && retry_count >= DRXK_MAX_RETRIES_POWERUP)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	/* Make sure all clk domains are active */
 | |
| 	status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Enable pll lock tests */
 | |
| 	status = write16(state, SIO_CC_PLL_LOCK__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	state->m_current_power_mode = DRX_POWER_UP;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int init_state(struct drxk_state *state)
 | |
| {
 | |
| 	/*
 | |
| 	 * FIXME: most (all?) of the values below should be moved into
 | |
| 	 * struct drxk_config, as they are probably board-specific
 | |
| 	 */
 | |
| 	u32 ul_vsb_if_agc_mode = DRXK_AGC_CTRL_AUTO;
 | |
| 	u32 ul_vsb_if_agc_output_level = 0;
 | |
| 	u32 ul_vsb_if_agc_min_level = 0;
 | |
| 	u32 ul_vsb_if_agc_max_level = 0x7FFF;
 | |
| 	u32 ul_vsb_if_agc_speed = 3;
 | |
| 
 | |
| 	u32 ul_vsb_rf_agc_mode = DRXK_AGC_CTRL_AUTO;
 | |
| 	u32 ul_vsb_rf_agc_output_level = 0;
 | |
| 	u32 ul_vsb_rf_agc_min_level = 0;
 | |
| 	u32 ul_vsb_rf_agc_max_level = 0x7FFF;
 | |
| 	u32 ul_vsb_rf_agc_speed = 3;
 | |
| 	u32 ul_vsb_rf_agc_top = 9500;
 | |
| 	u32 ul_vsb_rf_agc_cut_off_current = 4000;
 | |
| 
 | |
| 	u32 ul_atv_if_agc_mode = DRXK_AGC_CTRL_AUTO;
 | |
| 	u32 ul_atv_if_agc_output_level = 0;
 | |
| 	u32 ul_atv_if_agc_min_level = 0;
 | |
| 	u32 ul_atv_if_agc_max_level = 0;
 | |
| 	u32 ul_atv_if_agc_speed = 3;
 | |
| 
 | |
| 	u32 ul_atv_rf_agc_mode = DRXK_AGC_CTRL_OFF;
 | |
| 	u32 ul_atv_rf_agc_output_level = 0;
 | |
| 	u32 ul_atv_rf_agc_min_level = 0;
 | |
| 	u32 ul_atv_rf_agc_max_level = 0;
 | |
| 	u32 ul_atv_rf_agc_top = 9500;
 | |
| 	u32 ul_atv_rf_agc_cut_off_current = 4000;
 | |
| 	u32 ul_atv_rf_agc_speed = 3;
 | |
| 
 | |
| 	u32 ulQual83 = DEFAULT_MER_83;
 | |
| 	u32 ulQual93 = DEFAULT_MER_93;
 | |
| 
 | |
| 	u32 ul_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
 | |
| 	u32 ul_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
 | |
| 
 | |
| 	/* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */
 | |
| 	/* io_pad_cfg_mode output mode is drive always */
 | |
| 	/* io_pad_cfg_drive is set to power 2 (23 mA) */
 | |
| 	u32 ul_gpio_cfg = 0x0113;
 | |
| 	u32 ul_invert_ts_clock = 0;
 | |
| 	u32 ul_ts_data_strength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH;
 | |
| 	u32 ul_dvbt_bitrate = 50000000;
 | |
| 	u32 ul_dvbc_bitrate = DRXK_QAM_SYMBOLRATE_MAX * 8;
 | |
| 
 | |
| 	u32 ul_insert_rs_byte = 0;
 | |
| 
 | |
| 	u32 ul_rf_mirror = 1;
 | |
| 	u32 ul_power_down = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	state->m_has_lna = false;
 | |
| 	state->m_has_dvbt = false;
 | |
| 	state->m_has_dvbc = false;
 | |
| 	state->m_has_atv = false;
 | |
| 	state->m_has_oob = false;
 | |
| 	state->m_has_audio = false;
 | |
| 
 | |
| 	if (!state->m_chunk_size)
 | |
| 		state->m_chunk_size = 124;
 | |
| 
 | |
| 	state->m_osc_clock_freq = 0;
 | |
| 	state->m_smart_ant_inverted = false;
 | |
| 	state->m_b_p_down_open_bridge = false;
 | |
| 
 | |
| 	/* real system clock frequency in kHz */
 | |
| 	state->m_sys_clock_freq = 151875;
 | |
| 	/* Timing div, 250ns/Psys */
 | |
| 	/* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */
 | |
| 	state->m_hi_cfg_timing_div = ((state->m_sys_clock_freq / 1000) *
 | |
| 				   HI_I2C_DELAY) / 1000;
 | |
| 	/* Clipping */
 | |
| 	if (state->m_hi_cfg_timing_div > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M)
 | |
| 		state->m_hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M;
 | |
| 	state->m_hi_cfg_wake_up_key = (state->demod_address << 1);
 | |
| 	/* port/bridge/power down ctrl */
 | |
| 	state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
 | |
| 
 | |
| 	state->m_b_power_down = (ul_power_down != 0);
 | |
| 
 | |
| 	state->m_drxk_a3_patch_code = false;
 | |
| 
 | |
| 	/* Init AGC and PGA parameters */
 | |
| 	/* VSB IF */
 | |
| 	state->m_vsb_if_agc_cfg.ctrl_mode = ul_vsb_if_agc_mode;
 | |
| 	state->m_vsb_if_agc_cfg.output_level = ul_vsb_if_agc_output_level;
 | |
| 	state->m_vsb_if_agc_cfg.min_output_level = ul_vsb_if_agc_min_level;
 | |
| 	state->m_vsb_if_agc_cfg.max_output_level = ul_vsb_if_agc_max_level;
 | |
| 	state->m_vsb_if_agc_cfg.speed = ul_vsb_if_agc_speed;
 | |
| 	state->m_vsb_pga_cfg = 140;
 | |
| 
 | |
| 	/* VSB RF */
 | |
| 	state->m_vsb_rf_agc_cfg.ctrl_mode = ul_vsb_rf_agc_mode;
 | |
| 	state->m_vsb_rf_agc_cfg.output_level = ul_vsb_rf_agc_output_level;
 | |
| 	state->m_vsb_rf_agc_cfg.min_output_level = ul_vsb_rf_agc_min_level;
 | |
| 	state->m_vsb_rf_agc_cfg.max_output_level = ul_vsb_rf_agc_max_level;
 | |
| 	state->m_vsb_rf_agc_cfg.speed = ul_vsb_rf_agc_speed;
 | |
| 	state->m_vsb_rf_agc_cfg.top = ul_vsb_rf_agc_top;
 | |
| 	state->m_vsb_rf_agc_cfg.cut_off_current = ul_vsb_rf_agc_cut_off_current;
 | |
| 	state->m_vsb_pre_saw_cfg.reference = 0x07;
 | |
| 	state->m_vsb_pre_saw_cfg.use_pre_saw = true;
 | |
| 
 | |
| 	state->m_Quality83percent = DEFAULT_MER_83;
 | |
| 	state->m_Quality93percent = DEFAULT_MER_93;
 | |
| 	if (ulQual93 <= 500 && ulQual83 < ulQual93) {
 | |
| 		state->m_Quality83percent = ulQual83;
 | |
| 		state->m_Quality93percent = ulQual93;
 | |
| 	}
 | |
| 
 | |
| 	/* ATV IF */
 | |
| 	state->m_atv_if_agc_cfg.ctrl_mode = ul_atv_if_agc_mode;
 | |
| 	state->m_atv_if_agc_cfg.output_level = ul_atv_if_agc_output_level;
 | |
| 	state->m_atv_if_agc_cfg.min_output_level = ul_atv_if_agc_min_level;
 | |
| 	state->m_atv_if_agc_cfg.max_output_level = ul_atv_if_agc_max_level;
 | |
| 	state->m_atv_if_agc_cfg.speed = ul_atv_if_agc_speed;
 | |
| 
 | |
| 	/* ATV RF */
 | |
| 	state->m_atv_rf_agc_cfg.ctrl_mode = ul_atv_rf_agc_mode;
 | |
| 	state->m_atv_rf_agc_cfg.output_level = ul_atv_rf_agc_output_level;
 | |
| 	state->m_atv_rf_agc_cfg.min_output_level = ul_atv_rf_agc_min_level;
 | |
| 	state->m_atv_rf_agc_cfg.max_output_level = ul_atv_rf_agc_max_level;
 | |
| 	state->m_atv_rf_agc_cfg.speed = ul_atv_rf_agc_speed;
 | |
| 	state->m_atv_rf_agc_cfg.top = ul_atv_rf_agc_top;
 | |
| 	state->m_atv_rf_agc_cfg.cut_off_current = ul_atv_rf_agc_cut_off_current;
 | |
| 	state->m_atv_pre_saw_cfg.reference = 0x04;
 | |
| 	state->m_atv_pre_saw_cfg.use_pre_saw = true;
 | |
| 
 | |
| 
 | |
| 	/* DVBT RF */
 | |
| 	state->m_dvbt_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF;
 | |
| 	state->m_dvbt_rf_agc_cfg.output_level = 0;
 | |
| 	state->m_dvbt_rf_agc_cfg.min_output_level = 0;
 | |
| 	state->m_dvbt_rf_agc_cfg.max_output_level = 0xFFFF;
 | |
| 	state->m_dvbt_rf_agc_cfg.top = 0x2100;
 | |
| 	state->m_dvbt_rf_agc_cfg.cut_off_current = 4000;
 | |
| 	state->m_dvbt_rf_agc_cfg.speed = 1;
 | |
| 
 | |
| 
 | |
| 	/* DVBT IF */
 | |
| 	state->m_dvbt_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO;
 | |
| 	state->m_dvbt_if_agc_cfg.output_level = 0;
 | |
| 	state->m_dvbt_if_agc_cfg.min_output_level = 0;
 | |
| 	state->m_dvbt_if_agc_cfg.max_output_level = 9000;
 | |
| 	state->m_dvbt_if_agc_cfg.top = 13424;
 | |
| 	state->m_dvbt_if_agc_cfg.cut_off_current = 0;
 | |
| 	state->m_dvbt_if_agc_cfg.speed = 3;
 | |
| 	state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay = 30;
 | |
| 	state->m_dvbt_if_agc_cfg.ingain_tgt_max = 30000;
 | |
| 	/* state->m_dvbtPgaCfg = 140; */
 | |
| 
 | |
| 	state->m_dvbt_pre_saw_cfg.reference = 4;
 | |
| 	state->m_dvbt_pre_saw_cfg.use_pre_saw = false;
 | |
| 
 | |
| 	/* QAM RF */
 | |
| 	state->m_qam_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF;
 | |
| 	state->m_qam_rf_agc_cfg.output_level = 0;
 | |
| 	state->m_qam_rf_agc_cfg.min_output_level = 6023;
 | |
| 	state->m_qam_rf_agc_cfg.max_output_level = 27000;
 | |
| 	state->m_qam_rf_agc_cfg.top = 0x2380;
 | |
| 	state->m_qam_rf_agc_cfg.cut_off_current = 4000;
 | |
| 	state->m_qam_rf_agc_cfg.speed = 3;
 | |
| 
 | |
| 	/* QAM IF */
 | |
| 	state->m_qam_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO;
 | |
| 	state->m_qam_if_agc_cfg.output_level = 0;
 | |
| 	state->m_qam_if_agc_cfg.min_output_level = 0;
 | |
| 	state->m_qam_if_agc_cfg.max_output_level = 9000;
 | |
| 	state->m_qam_if_agc_cfg.top = 0x0511;
 | |
| 	state->m_qam_if_agc_cfg.cut_off_current = 0;
 | |
| 	state->m_qam_if_agc_cfg.speed = 3;
 | |
| 	state->m_qam_if_agc_cfg.ingain_tgt_max = 5119;
 | |
| 	state->m_qam_if_agc_cfg.fast_clip_ctrl_delay = 50;
 | |
| 
 | |
| 	state->m_qam_pga_cfg = 140;
 | |
| 	state->m_qam_pre_saw_cfg.reference = 4;
 | |
| 	state->m_qam_pre_saw_cfg.use_pre_saw = false;
 | |
| 
 | |
| 	state->m_operation_mode = OM_NONE;
 | |
| 	state->m_drxk_state = DRXK_UNINITIALIZED;
 | |
| 
 | |
| 	/* MPEG output configuration */
 | |
| 	state->m_enable_mpeg_output = true;	/* If TRUE; enable MPEG output */
 | |
| 	state->m_insert_rs_byte = false;	/* If TRUE; insert RS byte */
 | |
| 	state->m_invert_data = false;	/* If TRUE; invert DATA signals */
 | |
| 	state->m_invert_err = false;	/* If TRUE; invert ERR signal */
 | |
| 	state->m_invert_str = false;	/* If TRUE; invert STR signals */
 | |
| 	state->m_invert_val = false;	/* If TRUE; invert VAL signals */
 | |
| 	state->m_invert_clk = (ul_invert_ts_clock != 0);	/* If TRUE; invert CLK signals */
 | |
| 
 | |
| 	/* If TRUE; static MPEG clockrate will be used;
 | |
| 	   otherwise clockrate will adapt to the bitrate of the TS */
 | |
| 
 | |
| 	state->m_dvbt_bitrate = ul_dvbt_bitrate;
 | |
| 	state->m_dvbc_bitrate = ul_dvbc_bitrate;
 | |
| 
 | |
| 	state->m_ts_data_strength = (ul_ts_data_strength & 0x07);
 | |
| 
 | |
| 	/* Maximum bitrate in b/s in case static clockrate is selected */
 | |
| 	state->m_mpeg_ts_static_bitrate = 19392658;
 | |
| 	state->m_disable_te_ihandling = false;
 | |
| 
 | |
| 	if (ul_insert_rs_byte)
 | |
| 		state->m_insert_rs_byte = true;
 | |
| 
 | |
| 	state->m_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT;
 | |
| 	if (ul_mpeg_lock_time_out < 10000)
 | |
| 		state->m_mpeg_lock_time_out = ul_mpeg_lock_time_out;
 | |
| 	state->m_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT;
 | |
| 	if (ul_demod_lock_time_out < 10000)
 | |
| 		state->m_demod_lock_time_out = ul_demod_lock_time_out;
 | |
| 
 | |
| 	/* QAM defaults */
 | |
| 	state->m_constellation = DRX_CONSTELLATION_AUTO;
 | |
| 	state->m_qam_interleave_mode = DRXK_QAM_I12_J17;
 | |
| 	state->m_fec_rs_plen = 204 * 8;	/* fecRsPlen  annex A */
 | |
| 	state->m_fec_rs_prescale = 1;
 | |
| 
 | |
| 	state->m_sqi_speed = DRXK_DVBT_SQI_SPEED_MEDIUM;
 | |
| 	state->m_agcfast_clip_ctrl_delay = 0;
 | |
| 
 | |
| 	state->m_gpio_cfg = ul_gpio_cfg;
 | |
| 
 | |
| 	state->m_b_power_down = false;
 | |
| 	state->m_current_power_mode = DRX_POWER_DOWN;
 | |
| 
 | |
| 	state->m_rfmirror = (ul_rf_mirror == 0);
 | |
| 	state->m_if_agc_pol = false;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxx_open(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u32 jtag = 0;
 | |
| 	u16 bid = 0;
 | |
| 	u16 key = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* stop lock indicator process */
 | |
| 	status = write16(state, SCU_RAM_GPIO__A,
 | |
| 			 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Check device id */
 | |
| 	status = read16(state, SIO_TOP_COMM_KEY__A, &key);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, key);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int get_device_capabilities(struct drxk_state *state)
 | |
| {
 | |
| 	u16 sio_pdr_ohw_cfg = 0;
 | |
| 	u32 sio_top_jtagid_lo = 0;
 | |
| 	int status;
 | |
| 	const char *spin = "";
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* driver 0.9.0 */
 | |
| 	/* stop lock indicator process */
 | |
| 	status = write16(state, SCU_RAM_GPIO__A,
 | |
| 			 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) {
 | |
| 	case 0:
 | |
| 		/* ignore (bypass ?) */
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		/* 27 MHz */
 | |
| 		state->m_osc_clock_freq = 27000;
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		/* 20.25 MHz */
 | |
| 		state->m_osc_clock_freq = 20250;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		/* 4 MHz */
 | |
| 		state->m_osc_clock_freq = 20250;
 | |
| 		break;
 | |
| 	default:
 | |
| 		pr_err("Clock Frequency is unknown\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	/*
 | |
| 		Determine device capabilities
 | |
| 		Based on pinning v14
 | |
| 		*/
 | |
| 	status = read32(state, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	pr_info("status = 0x%08x\n", sio_top_jtagid_lo);
 | |
| 
 | |
| 	/* driver 0.9.0 */
 | |
| 	switch ((sio_top_jtagid_lo >> 29) & 0xF) {
 | |
| 	case 0:
 | |
| 		state->m_device_spin = DRXK_SPIN_A1;
 | |
| 		spin = "A1";
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		state->m_device_spin = DRXK_SPIN_A2;
 | |
| 		spin = "A2";
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		state->m_device_spin = DRXK_SPIN_A3;
 | |
| 		spin = "A3";
 | |
| 		break;
 | |
| 	default:
 | |
| 		state->m_device_spin = DRXK_SPIN_UNKNOWN;
 | |
| 		status = -EINVAL;
 | |
| 		pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF);
 | |
| 		goto error2;
 | |
| 	}
 | |
| 	switch ((sio_top_jtagid_lo >> 12) & 0xFF) {
 | |
| 	case 0x13:
 | |
| 		/* typeId = DRX3913K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = false;
 | |
| 		state->m_has_audio = false;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = true;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = false;
 | |
| 		state->m_has_gpio1 = false;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x15:
 | |
| 		/* typeId = DRX3915K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = false;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = false;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x16:
 | |
| 		/* typeId = DRX3916K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = false;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = false;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x18:
 | |
| 		/* typeId = DRX3918K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = true;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = false;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x21:
 | |
| 		/* typeId = DRX3921K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = true;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = true;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x23:
 | |
| 		/* typeId = DRX3923K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = true;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = true;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x25:
 | |
| 		/* typeId = DRX3925K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = true;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = true;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	case 0x26:
 | |
| 		/* typeId = DRX3926K_TYPE_ID */
 | |
| 		state->m_has_lna = false;
 | |
| 		state->m_has_oob = false;
 | |
| 		state->m_has_atv = true;
 | |
| 		state->m_has_audio = false;
 | |
| 		state->m_has_dvbt = true;
 | |
| 		state->m_has_dvbc = true;
 | |
| 		state->m_has_sawsw = true;
 | |
| 		state->m_has_gpio2 = true;
 | |
| 		state->m_has_gpio1 = true;
 | |
| 		state->m_has_irqn = false;
 | |
| 		break;
 | |
| 	default:
 | |
| 		pr_err("DeviceID 0x%02x not supported\n",
 | |
| 			((sio_top_jtagid_lo >> 12) & 0xFF));
 | |
| 		status = -EINVAL;
 | |
| 		goto error2;
 | |
| 	}
 | |
| 
 | |
| 	pr_info("detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n",
 | |
| 	       ((sio_top_jtagid_lo >> 12) & 0xFF), spin,
 | |
| 	       state->m_osc_clock_freq / 1000,
 | |
| 	       state->m_osc_clock_freq % 1000);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| error2:
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int hi_command(struct drxk_state *state, u16 cmd, u16 *p_result)
 | |
| {
 | |
| 	int status;
 | |
| 	bool powerdown_cmd;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Write command */
 | |
| 	status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (cmd == SIO_HI_RA_RAM_CMD_RESET)
 | |
| 		usleep_range(1000, 2000);
 | |
| 
 | |
| 	powerdown_cmd =
 | |
| 	    (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) &&
 | |
| 		    ((state->m_hi_cfg_ctrl) &
 | |
| 		     SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) ==
 | |
| 		    SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ);
 | |
| 	if (!powerdown_cmd) {
 | |
| 		/* Wait until command rdy */
 | |
| 		u32 retry_count = 0;
 | |
| 		u16 wait_cmd;
 | |
| 
 | |
| 		do {
 | |
| 			usleep_range(1000, 2000);
 | |
| 			retry_count += 1;
 | |
| 			status = read16(state, SIO_HI_RA_RAM_CMD__A,
 | |
| 					  &wait_cmd);
 | |
| 		} while ((status < 0 || wait_cmd) && (retry_count < DRXK_MAX_RETRIES));
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = read16(state, SIO_HI_RA_RAM_RES__A, p_result);
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int hi_cfg_command(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	mutex_lock(&state->mutex);
 | |
| 
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_6__A,
 | |
| 			 state->m_hi_cfg_timeout);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_5__A,
 | |
| 			 state->m_hi_cfg_ctrl);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_4__A,
 | |
| 			 state->m_hi_cfg_wake_up_key);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_3__A,
 | |
| 			 state->m_hi_cfg_bridge_delay);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
 | |
| 			 state->m_hi_cfg_timing_div);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_1__A,
 | |
| 			 SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = hi_command(state, SIO_HI_RA_RAM_CMD_CONFIG, NULL);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	state->m_hi_cfg_ctrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
 | |
| error:
 | |
| 	mutex_unlock(&state->mutex);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int init_hi(struct drxk_state *state)
 | |
| {
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	state->m_hi_cfg_wake_up_key = (state->demod_address << 1);
 | |
| 	state->m_hi_cfg_timeout = 0x96FF;
 | |
| 	/* port/bridge/power down ctrl */
 | |
| 	state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE;
 | |
| 
 | |
| 	return hi_cfg_command(state);
 | |
| }
 | |
| 
 | |
| static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 sio_pdr_mclk_cfg = 0;
 | |
| 	u16 sio_pdr_mdx_cfg = 0;
 | |
| 	u16 err_cfg = 0;
 | |
| 
 | |
| 	dprintk(1, ": mpeg %s, %s mode\n",
 | |
| 		mpeg_enable ? "enable" : "disable",
 | |
| 		state->m_enable_parallel ? "parallel" : "serial");
 | |
| 
 | |
| 	/* stop lock indicator process */
 | |
| 	status = write16(state, SCU_RAM_GPIO__A,
 | |
| 			 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*  MPEG TS pad configuration */
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (!mpeg_enable) {
 | |
| 		/*  Set MPEG TS pads to inputmode */
 | |
| 		status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	} else {
 | |
| 		/* Enable MPEG output */
 | |
| 		sio_pdr_mdx_cfg =
 | |
| 			((state->m_ts_data_strength <<
 | |
| 			SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003);
 | |
| 		sio_pdr_mclk_cfg = ((state->m_ts_clockk_strength <<
 | |
| 					SIO_PDR_MCLK_CFG_DRIVE__B) |
 | |
| 					0x0003);
 | |
| 
 | |
| 		status = write16(state, SIO_PDR_MSTRT_CFG__A, sio_pdr_mdx_cfg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (state->enable_merr_cfg)
 | |
| 			err_cfg = sio_pdr_mdx_cfg;
 | |
| 
 | |
| 		status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (state->m_enable_parallel) {
 | |
| 			/* parallel -> enable MD1 to MD7 */
 | |
| 			status = write16(state, SIO_PDR_MD1_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD2_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD3_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD4_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD5_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD6_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD7_CFG__A,
 | |
| 					 sio_pdr_mdx_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		} else {
 | |
| 			sio_pdr_mdx_cfg = ((state->m_ts_data_strength <<
 | |
| 						SIO_PDR_MD0_CFG_DRIVE__B)
 | |
| 					| 0x0003);
 | |
| 			/* serial -> disable MD1 to MD7 */
 | |
| 			status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 		status = write16(state, SIO_PDR_MCLK_CFG__A, sio_pdr_mclk_cfg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_PDR_MD0_CFG__A, sio_pdr_mdx_cfg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 	/*  Enable MB output over MPEG pads and ctl input */
 | |
| 	status = write16(state, SIO_PDR_MON_CFG__A, 0x0000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/*  Write nomagic word to enable pdr reg write */
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_disable(struct drxk_state *state)
 | |
| {
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	return mpegts_configure_pins(state, false);
 | |
| }
 | |
| 
 | |
| static int bl_chain_cmd(struct drxk_state *state,
 | |
| 		      u16 rom_offset, u16 nr_of_elements, u32 time_out)
 | |
| {
 | |
| 	u16 bl_status = 0;
 | |
| 	int status;
 | |
| 	unsigned long end;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	mutex_lock(&state->mutex);
 | |
| 	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_CHAIN_ADDR__A, rom_offset);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_CHAIN_LEN__A, nr_of_elements);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	end = jiffies + msecs_to_jiffies(time_out);
 | |
| 	do {
 | |
| 		usleep_range(1000, 2000);
 | |
| 		status = read16(state, SIO_BL_STATUS__A, &bl_status);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	} while ((bl_status == 0x1) &&
 | |
| 			((time_is_after_jiffies(end))));
 | |
| 
 | |
| 	if (bl_status == 0x1) {
 | |
| 		pr_err("SIO not ready\n");
 | |
| 		status = -EINVAL;
 | |
| 		goto error2;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| error2:
 | |
| 	mutex_unlock(&state->mutex);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int download_microcode(struct drxk_state *state,
 | |
| 			     const u8 p_mc_image[], u32 length)
 | |
| {
 | |
| 	const u8 *p_src = p_mc_image;
 | |
| 	u32 address;
 | |
| 	u16 n_blocks;
 | |
| 	u16 block_size;
 | |
| 	u32 offset = 0;
 | |
| 	u32 i;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* down the drain (we don't care about MAGIC_WORD) */
 | |
| #if 0
 | |
| 	/* For future reference */
 | |
| 	drain = (p_src[0] << 8) | p_src[1];
 | |
| #endif
 | |
| 	p_src += sizeof(u16);
 | |
| 	offset += sizeof(u16);
 | |
| 	n_blocks = (p_src[0] << 8) | p_src[1];
 | |
| 	p_src += sizeof(u16);
 | |
| 	offset += sizeof(u16);
 | |
| 
 | |
| 	for (i = 0; i < n_blocks; i += 1) {
 | |
| 		address = (p_src[0] << 24) | (p_src[1] << 16) |
 | |
| 		    (p_src[2] << 8) | p_src[3];
 | |
| 		p_src += sizeof(u32);
 | |
| 		offset += sizeof(u32);
 | |
| 
 | |
| 		block_size = ((p_src[0] << 8) | p_src[1]) * sizeof(u16);
 | |
| 		p_src += sizeof(u16);
 | |
| 		offset += sizeof(u16);
 | |
| 
 | |
| #if 0
 | |
| 		/* For future reference */
 | |
| 		flags = (p_src[0] << 8) | p_src[1];
 | |
| #endif
 | |
| 		p_src += sizeof(u16);
 | |
| 		offset += sizeof(u16);
 | |
| 
 | |
| #if 0
 | |
| 		/* For future reference */
 | |
| 		block_crc = (p_src[0] << 8) | p_src[1];
 | |
| #endif
 | |
| 		p_src += sizeof(u16);
 | |
| 		offset += sizeof(u16);
 | |
| 
 | |
| 		if (offset + block_size > length) {
 | |
| 			pr_err("Firmware is corrupted.\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 
 | |
| 		status = write_block(state, address, block_size, p_src);
 | |
| 		if (status < 0) {
 | |
| 			pr_err("Error %d while loading firmware\n", status);
 | |
| 			break;
 | |
| 		}
 | |
| 		p_src += block_size;
 | |
| 		offset += block_size;
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbt_enable_ofdm_token_ring(struct drxk_state *state, bool enable)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 data = 0;
 | |
| 	u16 desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON;
 | |
| 	u16 desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED;
 | |
| 	unsigned long end;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (!enable) {
 | |
| 		desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF;
 | |
| 		desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN;
 | |
| 	}
 | |
| 
 | |
| 	status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
 | |
| 	if (status >= 0 && data == desired_status) {
 | |
| 		/* tokenring already has correct status */
 | |
| 		return status;
 | |
| 	}
 | |
| 	/* Disable/enable dvbt tokenring bridge   */
 | |
| 	status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desired_ctrl);
 | |
| 
 | |
| 	end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT);
 | |
| 	do {
 | |
| 		status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data);
 | |
| 		if ((status >= 0 && data == desired_status)
 | |
| 		    || time_is_after_jiffies(end))
 | |
| 			break;
 | |
| 		usleep_range(1000, 2000);
 | |
| 	} while (1);
 | |
| 	if (data != desired_status) {
 | |
| 		pr_err("SIO not ready\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_stop(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u16 fec_oc_snc_mode = 0;
 | |
| 	u16 fec_oc_ipr_mode = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Graceful shutdown (byte boundaries) */
 | |
| 	status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	fec_oc_snc_mode |= FEC_OC_SNC_MODE_SHUTDOWN__M;
 | |
| 	status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Suppress MCLK during absence of data */
 | |
| 	status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	fec_oc_ipr_mode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M;
 | |
| 	status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int scu_command(struct drxk_state *state,
 | |
| 		       u16 cmd, u8 parameter_len,
 | |
| 		       u16 *parameter, u8 result_len, u16 *result)
 | |
| {
 | |
| #if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15
 | |
| #error DRXK register mapping no longer compatible with this routine!
 | |
| #endif
 | |
| 	u16 cur_cmd = 0;
 | |
| 	int status = -EINVAL;
 | |
| 	unsigned long end;
 | |
| 	u8 buffer[34];
 | |
| 	int cnt = 0, ii;
 | |
| 	const char *p;
 | |
| 	char errname[30];
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if ((cmd == 0) || ((parameter_len > 0) && (parameter == NULL)) ||
 | |
| 	    ((result_len > 0) && (result == NULL))) {
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 		return status;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&state->mutex);
 | |
| 
 | |
| 	/* assume that the command register is ready
 | |
| 		since it is checked afterwards */
 | |
| 	if (parameter) {
 | |
| 		for (ii = parameter_len - 1; ii >= 0; ii -= 1) {
 | |
| 			buffer[cnt++] = (parameter[ii] & 0xFF);
 | |
| 			buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF);
 | |
| 		}
 | |
| 	}
 | |
| 	buffer[cnt++] = (cmd & 0xFF);
 | |
| 	buffer[cnt++] = ((cmd >> 8) & 0xFF);
 | |
| 
 | |
| 	write_block(state, SCU_RAM_PARAM_0__A -
 | |
| 			(parameter_len - 1), cnt, buffer);
 | |
| 	/* Wait until SCU has processed command */
 | |
| 	end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME);
 | |
| 	do {
 | |
| 		usleep_range(1000, 2000);
 | |
| 		status = read16(state, SCU_RAM_COMMAND__A, &cur_cmd);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	} while (!(cur_cmd == DRX_SCU_READY) && (time_is_after_jiffies(end)));
 | |
| 	if (cur_cmd != DRX_SCU_READY) {
 | |
| 		pr_err("SCU not ready\n");
 | |
| 		status = -EIO;
 | |
| 		goto error2;
 | |
| 	}
 | |
| 	/* read results */
 | |
| 	if ((result_len > 0) && (result != NULL)) {
 | |
| 		s16 err;
 | |
| 		int ii;
 | |
| 
 | |
| 		for (ii = result_len - 1; ii >= 0; ii -= 1) {
 | |
| 			status = read16(state, SCU_RAM_PARAM_0__A - ii,
 | |
| 					&result[ii]);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* Check if an error was reported by SCU */
 | |
| 		err = (s16)result[0];
 | |
| 		if (err >= 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* check for the known error codes */
 | |
| 		switch (err) {
 | |
| 		case SCU_RESULT_UNKCMD:
 | |
| 			p = "SCU_RESULT_UNKCMD";
 | |
| 			break;
 | |
| 		case SCU_RESULT_UNKSTD:
 | |
| 			p = "SCU_RESULT_UNKSTD";
 | |
| 			break;
 | |
| 		case SCU_RESULT_SIZE:
 | |
| 			p = "SCU_RESULT_SIZE";
 | |
| 			break;
 | |
| 		case SCU_RESULT_INVPAR:
 | |
| 			p = "SCU_RESULT_INVPAR";
 | |
| 			break;
 | |
| 		default: /* Other negative values are errors */
 | |
| 			sprintf(errname, "ERROR: %d\n", err);
 | |
| 			p = errname;
 | |
| 		}
 | |
| 		pr_err("%s while sending cmd 0x%04x with params:", p, cmd);
 | |
| 		print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt);
 | |
| 		status = -EINVAL;
 | |
| 		goto error2;
 | |
| 	}
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| error2:
 | |
| 	mutex_unlock(&state->mutex);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_iqm_af(struct drxk_state *state, bool active)
 | |
| {
 | |
| 	u16 data = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Configure IQM */
 | |
| 	status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (!active) {
 | |
| 		data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY
 | |
| 				| IQM_AF_STDBY_STDBY_AMP_STANDBY
 | |
| 				| IQM_AF_STDBY_STDBY_PD_STANDBY
 | |
| 				| IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY
 | |
| 				| IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY);
 | |
| 	} else {
 | |
| 		data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY)
 | |
| 				& (~IQM_AF_STDBY_STDBY_AMP_STANDBY)
 | |
| 				& (~IQM_AF_STDBY_STDBY_PD_STANDBY)
 | |
| 				& (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY)
 | |
| 				& (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY)
 | |
| 			);
 | |
| 	}
 | |
| 	status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int ctrl_power_mode(struct drxk_state *state, enum drx_power_mode *mode)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u16 sio_cc_pwd_mode = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Check arguments */
 | |
| 	if (mode == NULL)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	switch (*mode) {
 | |
| 	case DRX_POWER_UP:
 | |
| 		sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE;
 | |
| 		break;
 | |
| 	case DRXK_POWER_DOWN_OFDM:
 | |
| 		sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OFDM;
 | |
| 		break;
 | |
| 	case DRXK_POWER_DOWN_CORE:
 | |
| 		sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK;
 | |
| 		break;
 | |
| 	case DRXK_POWER_DOWN_PLL:
 | |
| 		sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL;
 | |
| 		break;
 | |
| 	case DRX_POWER_DOWN:
 | |
| 		sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Unknow sleep mode */
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* If already in requested power mode, do nothing */
 | |
| 	if (state->m_current_power_mode == *mode)
 | |
| 		return 0;
 | |
| 
 | |
| 	/* For next steps make sure to start from DRX_POWER_UP mode */
 | |
| 	if (state->m_current_power_mode != DRX_POWER_UP) {
 | |
| 		status = power_up_device(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = dvbt_enable_ofdm_token_ring(state, true);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	if (*mode == DRX_POWER_UP) {
 | |
| 		/* Restore analog & pin configuration */
 | |
| 	} else {
 | |
| 		/* Power down to requested mode */
 | |
| 		/* Backup some register settings */
 | |
| 		/* Set pins with possible pull-ups connected
 | |
| 		   to them in input mode */
 | |
| 		/* Analog power down */
 | |
| 		/* ADC power down */
 | |
| 		/* Power down device */
 | |
| 		/* stop all comm_exec */
 | |
| 		/* Stop and power down previous standard */
 | |
| 		switch (state->m_operation_mode) {
 | |
| 		case OM_DVBT:
 | |
| 			status = mpegts_stop(state);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = power_down_dvbt(state, false);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			break;
 | |
| 		case OM_QAM_ITU_A:
 | |
| 		case OM_QAM_ITU_C:
 | |
| 			status = mpegts_stop(state);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			status = power_down_qam(state);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 		status = dvbt_enable_ofdm_token_ring(state, false);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (*mode != DRXK_POWER_DOWN_OFDM) {
 | |
| 			state->m_hi_cfg_ctrl |=
 | |
| 				SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
 | |
| 			status = hi_cfg_command(state);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 	}
 | |
| 	state->m_current_power_mode = *mode;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode)
 | |
| {
 | |
| 	enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
 | |
| 	u16 cmd_result = 0;
 | |
| 	u16 data = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	status = read16(state, SCU_COMM_EXEC__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (data == SCU_COMM_EXEC_ACTIVE) {
 | |
| 		/* Send OFDM stop command */
 | |
| 		status = scu_command(state,
 | |
| 				     SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_STOP,
 | |
| 				     0, NULL, 1, &cmd_result);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* Send OFDM reset command */
 | |
| 		status = scu_command(state,
 | |
| 				     SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_RESET,
 | |
| 				     0, NULL, 1, &cmd_result);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	/* Reset datapath for OFDM, processors first */
 | |
| 	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* powerdown AFE                   */
 | |
| 	status = set_iqm_af(state, false);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* powerdown to OFDM mode          */
 | |
| 	if (set_power_mode) {
 | |
| 		status = ctrl_power_mode(state, &power_mode);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int setoperation_mode(struct drxk_state *state,
 | |
| 			    enum operation_mode o_mode)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/*
 | |
| 	   Stop and power down previous standard
 | |
| 	   TODO investigate total power down instead of partial
 | |
| 	   power down depending on "previous" standard.
 | |
| 	 */
 | |
| 
 | |
| 	/* disable HW lock indicator */
 | |
| 	status = write16(state, SCU_RAM_GPIO__A,
 | |
| 			 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Device is already at the required mode */
 | |
| 	if (state->m_operation_mode == o_mode)
 | |
| 		return 0;
 | |
| 
 | |
| 	switch (state->m_operation_mode) {
 | |
| 		/* OM_NONE was added for start up */
 | |
| 	case OM_NONE:
 | |
| 		break;
 | |
| 	case OM_DVBT:
 | |
| 		status = mpegts_stop(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = power_down_dvbt(state, true);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		state->m_operation_mode = OM_NONE;
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		status = mpegts_stop(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = power_down_qam(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		state->m_operation_mode = OM_NONE;
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_B:
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 		Power up new standard
 | |
| 		*/
 | |
| 	switch (o_mode) {
 | |
| 	case OM_DVBT:
 | |
| 		dprintk(1, ": DVB-T\n");
 | |
| 		state->m_operation_mode = o_mode;
 | |
| 		status = set_dvbt_standard(state, o_mode);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		dprintk(1, ": DVB-C Annex %c\n",
 | |
| 			(state->m_operation_mode == OM_QAM_ITU_A) ? 'A' : 'C');
 | |
| 		state->m_operation_mode = o_mode;
 | |
| 		status = set_qam_standard(state, o_mode);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_B:
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int start(struct drxk_state *state, s32 offset_freq,
 | |
| 		 s32 intermediate_frequency)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	u16 i_freqk_hz;
 | |
| 	s32 offsetk_hz = offset_freq / 1000;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (state->m_drxk_state != DRXK_STOPPED &&
 | |
| 		state->m_drxk_state != DRXK_DTV_STARTED)
 | |
| 		goto error;
 | |
| 
 | |
| 	state->m_b_mirror_freq_spect = (state->props.inversion == INVERSION_ON);
 | |
| 
 | |
| 	if (intermediate_frequency < 0) {
 | |
| 		state->m_b_mirror_freq_spect = !state->m_b_mirror_freq_spect;
 | |
| 		intermediate_frequency = -intermediate_frequency;
 | |
| 	}
 | |
| 
 | |
| 	switch (state->m_operation_mode) {
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		i_freqk_hz = (intermediate_frequency / 1000);
 | |
| 		status = set_qam(state, i_freqk_hz, offsetk_hz);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		state->m_drxk_state = DRXK_DTV_STARTED;
 | |
| 		break;
 | |
| 	case OM_DVBT:
 | |
| 		i_freqk_hz = (intermediate_frequency / 1000);
 | |
| 		status = mpegts_stop(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = set_dvbt(state, i_freqk_hz, offsetk_hz);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = dvbt_start(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		state->m_drxk_state = DRXK_DTV_STARTED;
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int shut_down(struct drxk_state *state)
 | |
| {
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	mpegts_stop(state);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int get_lock_status(struct drxk_state *state, u32 *p_lock_status)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (p_lock_status == NULL)
 | |
| 		goto error;
 | |
| 
 | |
| 	*p_lock_status = NOT_LOCKED;
 | |
| 
 | |
| 	/* define the SCU command code */
 | |
| 	switch (state->m_operation_mode) {
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_B:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		status = get_qam_lock_status(state, p_lock_status);
 | |
| 		break;
 | |
| 	case OM_DVBT:
 | |
| 		status = get_dvbt_lock_status(state, p_lock_status);
 | |
| 		break;
 | |
| 	default:
 | |
| 		pr_debug("Unsupported operation mode %d in %s\n",
 | |
| 			state->m_operation_mode, __func__);
 | |
| 		return 0;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_start(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	u16 fec_oc_snc_mode = 0;
 | |
| 
 | |
| 	/* Allow OC to sync again */
 | |
| 	status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	fec_oc_snc_mode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M;
 | |
| 	status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_SNC_UNLOCK__A, 1);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_dto_init(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Rate integration settings */
 | |
| 	status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Additional configuration */
 | |
| 	status = write16(state, FEC_OC_OCR_INVERT__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_SNC_LWM__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_SNC_HWM__A, 12);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_dto_setup(struct drxk_state *state,
 | |
| 			  enum operation_mode o_mode)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	u16 fec_oc_reg_mode = 0;	/* FEC_OC_MODE       register value */
 | |
| 	u16 fec_oc_reg_ipr_mode = 0;	/* FEC_OC_IPR_MODE   register value */
 | |
| 	u16 fec_oc_dto_mode = 0;	/* FEC_OC_IPR_INVERT register value */
 | |
| 	u16 fec_oc_fct_mode = 0;	/* FEC_OC_IPR_INVERT register value */
 | |
| 	u16 fec_oc_dto_period = 2;	/* FEC_OC_IPR_INVERT register value */
 | |
| 	u16 fec_oc_dto_burst_len = 188;	/* FEC_OC_IPR_INVERT register value */
 | |
| 	u32 fec_oc_rcn_ctl_rate = 0;	/* FEC_OC_IPR_INVERT register value */
 | |
| 	u16 fec_oc_tmd_mode = 0;
 | |
| 	u16 fec_oc_tmd_int_upd_rate = 0;
 | |
| 	u32 max_bit_rate = 0;
 | |
| 	bool static_clk = false;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Check insertion of the Reed-Solomon parity bytes */
 | |
| 	status = read16(state, FEC_OC_MODE__A, &fec_oc_reg_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M);
 | |
| 	fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M);
 | |
| 	if (state->m_insert_rs_byte) {
 | |
| 		/* enable parity symbol forward */
 | |
| 		fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M;
 | |
| 		/* MVAL disable during parity bytes */
 | |
| 		fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M;
 | |
| 		/* TS burst length to 204 */
 | |
| 		fec_oc_dto_burst_len = 204;
 | |
| 	}
 | |
| 
 | |
| 	/* Check serial or parallel output */
 | |
| 	fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M));
 | |
| 	if (!state->m_enable_parallel) {
 | |
| 		/* MPEG data output is serial -> set ipr_mode[0] */
 | |
| 		fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M;
 | |
| 	}
 | |
| 
 | |
| 	switch (o_mode) {
 | |
| 	case OM_DVBT:
 | |
| 		max_bit_rate = state->m_dvbt_bitrate;
 | |
| 		fec_oc_tmd_mode = 3;
 | |
| 		fec_oc_rcn_ctl_rate = 0xC00000;
 | |
| 		static_clk = state->m_dvbt_static_clk;
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		fec_oc_tmd_mode = 0x0004;
 | |
| 		fec_oc_rcn_ctl_rate = 0xD2B4EE;	/* good for >63 Mb/s */
 | |
| 		max_bit_rate = state->m_dvbc_bitrate;
 | |
| 		static_clk = state->m_dvbc_static_clk;
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 	}		/* switch (standard) */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Configure DTO's */
 | |
| 	if (static_clk) {
 | |
| 		u32 bit_rate = 0;
 | |
| 
 | |
| 		/* Rational DTO for MCLK source (static MCLK rate),
 | |
| 			Dynamic DTO for optimal grouping
 | |
| 			(avoid intra-packet gaps),
 | |
| 			DTO offset enable to sync TS burst with MSTRT */
 | |
| 		fec_oc_dto_mode = (FEC_OC_DTO_MODE_DYNAMIC__M |
 | |
| 				FEC_OC_DTO_MODE_OFFSET_ENABLE__M);
 | |
| 		fec_oc_fct_mode = (FEC_OC_FCT_MODE_RAT_ENA__M |
 | |
| 				FEC_OC_FCT_MODE_VIRT_ENA__M);
 | |
| 
 | |
| 		/* Check user defined bitrate */
 | |
| 		bit_rate = max_bit_rate;
 | |
| 		if (bit_rate > 75900000UL) {	/* max is 75.9 Mb/s */
 | |
| 			bit_rate = 75900000UL;
 | |
| 		}
 | |
| 		/* Rational DTO period:
 | |
| 			dto_period = (Fsys / bitrate) - 2
 | |
| 
 | |
| 			result should be floored,
 | |
| 			to make sure >= requested bitrate
 | |
| 			*/
 | |
| 		fec_oc_dto_period = (u16) (((state->m_sys_clock_freq)
 | |
| 						* 1000) / bit_rate);
 | |
| 		if (fec_oc_dto_period <= 2)
 | |
| 			fec_oc_dto_period = 0;
 | |
| 		else
 | |
| 			fec_oc_dto_period -= 2;
 | |
| 		fec_oc_tmd_int_upd_rate = 8;
 | |
| 	} else {
 | |
| 		/* (commonAttr->static_clk == false) => dynamic mode */
 | |
| 		fec_oc_dto_mode = FEC_OC_DTO_MODE_DYNAMIC__M;
 | |
| 		fec_oc_fct_mode = FEC_OC_FCT_MODE__PRE;
 | |
| 		fec_oc_tmd_int_upd_rate = 5;
 | |
| 	}
 | |
| 
 | |
| 	/* Write appropriate registers with requested configuration */
 | |
| 	status = write16(state, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_DTO_MODE__A, fec_oc_dto_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_FCT_MODE__A, fec_oc_fct_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_MODE__A, fec_oc_reg_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Rate integration settings */
 | |
| 	status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fec_oc_rcn_ctl_rate);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A,
 | |
| 			 fec_oc_tmd_int_upd_rate);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_TMD_MODE__A, fec_oc_tmd_mode);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int mpegts_configure_polarity(struct drxk_state *state)
 | |
| {
 | |
| 	u16 fec_oc_reg_ipr_invert = 0;
 | |
| 
 | |
| 	/* Data mask for the output data byte */
 | |
| 	u16 invert_data_mask =
 | |
| 	    FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M |
 | |
| 	    FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M |
 | |
| 	    FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M |
 | |
| 	    FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Control selective inversion of output bits */
 | |
| 	fec_oc_reg_ipr_invert &= (~(invert_data_mask));
 | |
| 	if (state->m_invert_data)
 | |
| 		fec_oc_reg_ipr_invert |= invert_data_mask;
 | |
| 	fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M));
 | |
| 	if (state->m_invert_err)
 | |
| 		fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M;
 | |
| 	fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M));
 | |
| 	if (state->m_invert_str)
 | |
| 		fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M;
 | |
| 	fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M));
 | |
| 	if (state->m_invert_val)
 | |
| 		fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M;
 | |
| 	fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M));
 | |
| 	if (state->m_invert_clk)
 | |
| 		fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M;
 | |
| 
 | |
| 	return write16(state, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert);
 | |
| }
 | |
| 
 | |
| #define   SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000
 | |
| 
 | |
| static int set_agc_rf(struct drxk_state *state,
 | |
| 		    struct s_cfg_agc *p_agc_cfg, bool is_dtv)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 	u16 data = 0;
 | |
| 	struct s_cfg_agc *p_if_agc_settings;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (p_agc_cfg == NULL)
 | |
| 		goto error;
 | |
| 
 | |
| 	switch (p_agc_cfg->ctrl_mode) {
 | |
| 	case DRXK_AGC_CTRL_AUTO:
 | |
| 		/* Enable RF AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Enable SCU RF AGC loop */
 | |
| 		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
 | |
| 
 | |
| 		/* Polarity */
 | |
| 		if (state->m_rf_agc_pol)
 | |
| 			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
 | |
| 		else
 | |
| 			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Set speed (using complementary reduction value) */
 | |
| 		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M;
 | |
| 		data |= (~(p_agc_cfg->speed <<
 | |
| 				SCU_RAM_AGC_KI_RED_RAGC_RED__B)
 | |
| 				& SCU_RAM_AGC_KI_RED_RAGC_RED__M);
 | |
| 
 | |
| 		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (is_dvbt(state))
 | |
| 			p_if_agc_settings = &state->m_dvbt_if_agc_cfg;
 | |
| 		else if (is_qam(state))
 | |
| 			p_if_agc_settings = &state->m_qam_if_agc_cfg;
 | |
| 		else
 | |
| 			p_if_agc_settings = &state->m_atv_if_agc_cfg;
 | |
| 		if (p_if_agc_settings == NULL) {
 | |
| 			status = -EINVAL;
 | |
| 			goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* Set TOP, only if IF-AGC is in AUTO mode */
 | |
| 		if (p_if_agc_settings->ctrl_mode == DRXK_AGC_CTRL_AUTO) {
 | |
| 			status = write16(state,
 | |
| 					 SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
 | |
| 					 p_agc_cfg->top);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* Cut-Off current */
 | |
| 		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A,
 | |
| 				 p_agc_cfg->cut_off_current);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Max. output level */
 | |
| 		status = write16(state, SCU_RAM_AGC_RF_MAX__A,
 | |
| 				 p_agc_cfg->max_output_level);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		break;
 | |
| 
 | |
| 	case DRXK_AGC_CTRL_USER:
 | |
| 		/* Enable RF AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Disable SCU RF AGC loop */
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
 | |
| 		if (state->m_rf_agc_pol)
 | |
| 			data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
 | |
| 		else
 | |
| 			data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* SCU c.o.c. to 0, enabling full control range */
 | |
| 		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Write value to output pin */
 | |
| 		status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A,
 | |
| 				 p_agc_cfg->output_level);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 
 | |
| 	case DRXK_AGC_CTRL_OFF:
 | |
| 		/* Disable RF AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Disable SCU RF AGC loop */
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| #define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000
 | |
| 
 | |
| static int set_agc_if(struct drxk_state *state,
 | |
| 		    struct s_cfg_agc *p_agc_cfg, bool is_dtv)
 | |
| {
 | |
| 	u16 data = 0;
 | |
| 	int status = 0;
 | |
| 	struct s_cfg_agc *p_rf_agc_settings;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	switch (p_agc_cfg->ctrl_mode) {
 | |
| 	case DRXK_AGC_CTRL_AUTO:
 | |
| 
 | |
| 		/* Enable IF AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Enable SCU IF AGC loop */
 | |
| 		data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
 | |
| 
 | |
| 		/* Polarity */
 | |
| 		if (state->m_if_agc_pol)
 | |
| 			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
 | |
| 		else
 | |
| 			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Set speed (using complementary reduction value) */
 | |
| 		status = read16(state, SCU_RAM_AGC_KI_RED__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M;
 | |
| 		data |= (~(p_agc_cfg->speed <<
 | |
| 				SCU_RAM_AGC_KI_RED_IAGC_RED__B)
 | |
| 				& SCU_RAM_AGC_KI_RED_IAGC_RED__M);
 | |
| 
 | |
| 		status = write16(state, SCU_RAM_AGC_KI_RED__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (is_qam(state))
 | |
| 			p_rf_agc_settings = &state->m_qam_rf_agc_cfg;
 | |
| 		else
 | |
| 			p_rf_agc_settings = &state->m_atv_rf_agc_cfg;
 | |
| 		if (p_rf_agc_settings == NULL)
 | |
| 			return -1;
 | |
| 		/* Restore TOP */
 | |
| 		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
 | |
| 				 p_rf_agc_settings->top);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 
 | |
| 	case DRXK_AGC_CTRL_USER:
 | |
| 
 | |
| 		/* Enable IF AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Disable SCU IF AGC loop */
 | |
| 		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
 | |
| 
 | |
| 		/* Polarity */
 | |
| 		if (state->m_if_agc_pol)
 | |
| 			data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
 | |
| 		else
 | |
| 			data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Write value to output pin */
 | |
| 		status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
 | |
| 				 p_agc_cfg->output_level);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 
 | |
| 	case DRXK_AGC_CTRL_OFF:
 | |
| 
 | |
| 		/* Disable If AGC DAC */
 | |
| 		status = read16(state, IQM_AF_STDBY__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY;
 | |
| 		status = write16(state, IQM_AF_STDBY__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Disable SCU IF AGC loop */
 | |
| 		status = read16(state, SCU_RAM_AGC_CONFIG__A, &data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M;
 | |
| 		status = write16(state, SCU_RAM_AGC_CONFIG__A, data);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	}		/* switch (agcSettingsIf->ctrl_mode) */
 | |
| 
 | |
| 	/* always set the top to support
 | |
| 		configurations without if-loop */
 | |
| 	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_cfg->top);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int get_qam_signal_to_noise(struct drxk_state *state,
 | |
| 			       s32 *p_signal_to_noise)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	u16 qam_sl_err_power = 0;	/* accum. error between
 | |
| 					raw and sliced symbols */
 | |
| 	u32 qam_sl_sig_power = 0;	/* used for MER, depends of
 | |
| 					QAM modulation */
 | |
| 	u32 qam_sl_mer = 0;	/* QAM MER */
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* MER calculation */
 | |
| 
 | |
| 	/* get the register value needed for MER */
 | |
| 	status = read16(state, QAM_SL_ERR_POWER__A, &qam_sl_err_power);
 | |
| 	if (status < 0) {
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	switch (state->props.modulation) {
 | |
| 	case QAM_16:
 | |
| 		qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM16 << 2;
 | |
| 		break;
 | |
| 	case QAM_32:
 | |
| 		qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM32 << 2;
 | |
| 		break;
 | |
| 	case QAM_64:
 | |
| 		qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM64 << 2;
 | |
| 		break;
 | |
| 	case QAM_128:
 | |
| 		qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM128 << 2;
 | |
| 		break;
 | |
| 	default:
 | |
| 	case QAM_256:
 | |
| 		qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM256 << 2;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (qam_sl_err_power > 0) {
 | |
| 		qam_sl_mer = log10times100(qam_sl_sig_power) -
 | |
| 			log10times100((u32) qam_sl_err_power);
 | |
| 	}
 | |
| 	*p_signal_to_noise = qam_sl_mer;
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int get_dvbt_signal_to_noise(struct drxk_state *state,
 | |
| 				s32 *p_signal_to_noise)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 reg_data = 0;
 | |
| 	u32 eq_reg_td_sqr_err_i = 0;
 | |
| 	u32 eq_reg_td_sqr_err_q = 0;
 | |
| 	u16 eq_reg_td_sqr_err_exp = 0;
 | |
| 	u16 eq_reg_td_tps_pwr_ofs = 0;
 | |
| 	u16 eq_reg_td_req_smb_cnt = 0;
 | |
| 	u32 tps_cnt = 0;
 | |
| 	u32 sqr_err_iq = 0;
 | |
| 	u32 a = 0;
 | |
| 	u32 b = 0;
 | |
| 	u32 c = 0;
 | |
| 	u32 i_mer = 0;
 | |
| 	u16 transmission_params = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A,
 | |
| 			&eq_reg_td_tps_pwr_ofs);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A,
 | |
| 			&eq_reg_td_req_smb_cnt);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A,
 | |
| 			&eq_reg_td_sqr_err_exp);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A,
 | |
| 			®_data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Extend SQR_ERR_I operational range */
 | |
| 	eq_reg_td_sqr_err_i = (u32) reg_data;
 | |
| 	if ((eq_reg_td_sqr_err_exp > 11) &&
 | |
| 		(eq_reg_td_sqr_err_i < 0x00000FFFUL)) {
 | |
| 		eq_reg_td_sqr_err_i += 0x00010000UL;
 | |
| 	}
 | |
| 	status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®_data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Extend SQR_ERR_Q operational range */
 | |
| 	eq_reg_td_sqr_err_q = (u32) reg_data;
 | |
| 	if ((eq_reg_td_sqr_err_exp > 11) &&
 | |
| 		(eq_reg_td_sqr_err_q < 0x00000FFFUL))
 | |
| 		eq_reg_td_sqr_err_q += 0x00010000UL;
 | |
| 
 | |
| 	status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A,
 | |
| 			&transmission_params);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Check input data for MER */
 | |
| 
 | |
| 	/* MER calculation (in 0.1 dB) without math.h */
 | |
| 	if ((eq_reg_td_tps_pwr_ofs == 0) || (eq_reg_td_req_smb_cnt == 0))
 | |
| 		i_mer = 0;
 | |
| 	else if ((eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) == 0) {
 | |
| 		/* No error at all, this must be the HW reset value
 | |
| 			* Apparently no first measurement yet
 | |
| 			* Set MER to 0.0 */
 | |
| 		i_mer = 0;
 | |
| 	} else {
 | |
| 		sqr_err_iq = (eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) <<
 | |
| 			eq_reg_td_sqr_err_exp;
 | |
| 		if ((transmission_params &
 | |
| 			OFDM_SC_RA_RAM_OP_PARAM_MODE__M)
 | |
| 			== OFDM_SC_RA_RAM_OP_PARAM_MODE_2K)
 | |
| 			tps_cnt = 17;
 | |
| 		else
 | |
| 			tps_cnt = 68;
 | |
| 
 | |
| 		/* IMER = 100 * log10 (x)
 | |
| 			where x = (eq_reg_td_tps_pwr_ofs^2 *
 | |
| 			eq_reg_td_req_smb_cnt * tps_cnt)/sqr_err_iq
 | |
| 
 | |
| 			=> IMER = a + b -c
 | |
| 			where a = 100 * log10 (eq_reg_td_tps_pwr_ofs^2)
 | |
| 			b = 100 * log10 (eq_reg_td_req_smb_cnt * tps_cnt)
 | |
| 			c = 100 * log10 (sqr_err_iq)
 | |
| 			*/
 | |
| 
 | |
| 		/* log(x) x = 9bits * 9bits->18 bits  */
 | |
| 		a = log10times100(eq_reg_td_tps_pwr_ofs *
 | |
| 					eq_reg_td_tps_pwr_ofs);
 | |
| 		/* log(x) x = 16bits * 7bits->23 bits  */
 | |
| 		b = log10times100(eq_reg_td_req_smb_cnt * tps_cnt);
 | |
| 		/* log(x) x = (16bits + 16bits) << 15 ->32 bits  */
 | |
| 		c = log10times100(sqr_err_iq);
 | |
| 
 | |
| 		i_mer = a + b - c;
 | |
| 	}
 | |
| 	*p_signal_to_noise = i_mer;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int get_signal_to_noise(struct drxk_state *state, s32 *p_signal_to_noise)
 | |
| {
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	*p_signal_to_noise = 0;
 | |
| 	switch (state->m_operation_mode) {
 | |
| 	case OM_DVBT:
 | |
| 		return get_dvbt_signal_to_noise(state, p_signal_to_noise);
 | |
| 	case OM_QAM_ITU_A:
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		return get_qam_signal_to_noise(state, p_signal_to_noise);
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #if 0
 | |
| static int get_dvbt_quality(struct drxk_state *state, s32 *p_quality)
 | |
| {
 | |
| 	/* SNR Values for quasi errorfree reception rom Nordig 2.2 */
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	static s32 QE_SN[] = {
 | |
| 		51,		/* QPSK 1/2 */
 | |
| 		69,		/* QPSK 2/3 */
 | |
| 		79,		/* QPSK 3/4 */
 | |
| 		89,		/* QPSK 5/6 */
 | |
| 		97,		/* QPSK 7/8 */
 | |
| 		108,		/* 16-QAM 1/2 */
 | |
| 		131,		/* 16-QAM 2/3 */
 | |
| 		146,		/* 16-QAM 3/4 */
 | |
| 		156,		/* 16-QAM 5/6 */
 | |
| 		160,		/* 16-QAM 7/8 */
 | |
| 		165,		/* 64-QAM 1/2 */
 | |
| 		187,		/* 64-QAM 2/3 */
 | |
| 		202,		/* 64-QAM 3/4 */
 | |
| 		216,		/* 64-QAM 5/6 */
 | |
| 		225,		/* 64-QAM 7/8 */
 | |
| 	};
 | |
| 
 | |
| 	*p_quality = 0;
 | |
| 
 | |
| 	do {
 | |
| 		s32 signal_to_noise = 0;
 | |
| 		u16 constellation = 0;
 | |
| 		u16 code_rate = 0;
 | |
| 		u32 signal_to_noise_rel;
 | |
| 		u32 ber_quality;
 | |
| 
 | |
| 		status = get_dvbt_signal_to_noise(state, &signal_to_noise);
 | |
| 		if (status < 0)
 | |
| 			break;
 | |
| 		status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A,
 | |
| 				&constellation);
 | |
| 		if (status < 0)
 | |
| 			break;
 | |
| 		constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M;
 | |
| 
 | |
| 		status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A,
 | |
| 				&code_rate);
 | |
| 		if (status < 0)
 | |
| 			break;
 | |
| 		code_rate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M;
 | |
| 
 | |
| 		if (constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM ||
 | |
| 		    code_rate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8)
 | |
| 			break;
 | |
| 		signal_to_noise_rel = signal_to_noise -
 | |
| 		    QE_SN[constellation * 5 + code_rate];
 | |
| 		ber_quality = 100;
 | |
| 
 | |
| 		if (signal_to_noise_rel < -70)
 | |
| 			*p_quality = 0;
 | |
| 		else if (signal_to_noise_rel < 30)
 | |
| 			*p_quality = ((signal_to_noise_rel + 70) *
 | |
| 				     ber_quality) / 100;
 | |
| 		else
 | |
| 			*p_quality = ber_quality;
 | |
| 	} while (0);
 | |
| 	return 0;
 | |
| };
 | |
| 
 | |
| static int get_dvbc_quality(struct drxk_state *state, s32 *p_quality)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	*p_quality = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	do {
 | |
| 		u32 signal_to_noise = 0;
 | |
| 		u32 ber_quality = 100;
 | |
| 		u32 signal_to_noise_rel = 0;
 | |
| 
 | |
| 		status = get_qam_signal_to_noise(state, &signal_to_noise);
 | |
| 		if (status < 0)
 | |
| 			break;
 | |
| 
 | |
| 		switch (state->props.modulation) {
 | |
| 		case QAM_16:
 | |
| 			signal_to_noise_rel = signal_to_noise - 200;
 | |
| 			break;
 | |
| 		case QAM_32:
 | |
| 			signal_to_noise_rel = signal_to_noise - 230;
 | |
| 			break;	/* Not in NorDig */
 | |
| 		case QAM_64:
 | |
| 			signal_to_noise_rel = signal_to_noise - 260;
 | |
| 			break;
 | |
| 		case QAM_128:
 | |
| 			signal_to_noise_rel = signal_to_noise - 290;
 | |
| 			break;
 | |
| 		default:
 | |
| 		case QAM_256:
 | |
| 			signal_to_noise_rel = signal_to_noise - 320;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		if (signal_to_noise_rel < -70)
 | |
| 			*p_quality = 0;
 | |
| 		else if (signal_to_noise_rel < 30)
 | |
| 			*p_quality = ((signal_to_noise_rel + 70) *
 | |
| 				     ber_quality) / 100;
 | |
| 		else
 | |
| 			*p_quality = ber_quality;
 | |
| 	} while (0);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int get_quality(struct drxk_state *state, s32 *p_quality)
 | |
| {
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	switch (state->m_operation_mode) {
 | |
| 	case OM_DVBT:
 | |
| 		return get_dvbt_quality(state, p_quality);
 | |
| 	case OM_QAM_ITU_A:
 | |
| 		return get_dvbc_quality(state, p_quality);
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| /* Free data ram in SIO HI */
 | |
| #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040
 | |
| #define SIO_HI_RA_RAM_USR_END__A   0x420060
 | |
| 
 | |
| #define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A)
 | |
| #define DRXK_HI_ATOMIC_BUF_END   (SIO_HI_RA_RAM_USR_BEGIN__A + 7)
 | |
| #define DRXK_HI_ATOMIC_READ      SIO_HI_RA_RAM_PAR_3_ACP_RW_READ
 | |
| #define DRXK_HI_ATOMIC_WRITE     SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE
 | |
| 
 | |
| #define DRXDAP_FASI_ADDR2BLOCK(addr)  (((addr) >> 22) & 0x3F)
 | |
| #define DRXDAP_FASI_ADDR2BANK(addr)   (((addr) >> 16) & 0x3F)
 | |
| #define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF)
 | |
| 
 | |
| static int ConfigureI2CBridge(struct drxk_state *state, bool b_enable_bridge)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return 0;
 | |
| 	if (state->m_drxk_state == DRXK_POWERED_DOWN)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (state->no_i2c_bridge)
 | |
| 		return 0;
 | |
| 
 | |
| 	status = write16(state, SIO_HI_RA_RAM_PAR_1__A,
 | |
| 			 SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (b_enable_bridge) {
 | |
| 		status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
 | |
| 				 SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	} else {
 | |
| 		status = write16(state, SIO_HI_RA_RAM_PAR_2__A,
 | |
| 				 SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	status = hi_command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, NULL);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_pre_saw(struct drxk_state *state,
 | |
| 		     struct s_cfg_pre_saw *p_pre_saw_cfg)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if ((p_pre_saw_cfg == NULL)
 | |
| 	    || (p_pre_saw_cfg->reference > IQM_AF_PDREF__M))
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_AF_PDREF__A, p_pre_saw_cfg->reference);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int bl_direct_cmd(struct drxk_state *state, u32 target_addr,
 | |
| 		       u16 rom_offset, u16 nr_of_elements, u32 time_out)
 | |
| {
 | |
| 	u16 bl_status = 0;
 | |
| 	u16 offset = (u16) ((target_addr >> 0) & 0x00FFFF);
 | |
| 	u16 blockbank = (u16) ((target_addr >> 16) & 0x000FFF);
 | |
| 	int status;
 | |
| 	unsigned long end;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	mutex_lock(&state->mutex);
 | |
| 	status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_TGT_HDR__A, blockbank);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_TGT_ADDR__A, offset);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_SRC_ADDR__A, rom_offset);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_SRC_LEN__A, nr_of_elements);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	end = jiffies + msecs_to_jiffies(time_out);
 | |
| 	do {
 | |
| 		status = read16(state, SIO_BL_STATUS__A, &bl_status);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	} while ((bl_status == 0x1) && time_is_after_jiffies(end));
 | |
| 	if (bl_status == 0x1) {
 | |
| 		pr_err("SIO not ready\n");
 | |
| 		status = -EINVAL;
 | |
| 		goto error2;
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| error2:
 | |
| 	mutex_unlock(&state->mutex);
 | |
| 	return status;
 | |
| 
 | |
| }
 | |
| 
 | |
| static int adc_sync_measurement(struct drxk_state *state, u16 *count)
 | |
| {
 | |
| 	u16 data = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* start measurement */
 | |
| 	status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_START_LOCK__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	*count = 0;
 | |
| 	status = read16(state, IQM_AF_PHASE0__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (data == 127)
 | |
| 		*count = *count + 1;
 | |
| 	status = read16(state, IQM_AF_PHASE1__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (data == 127)
 | |
| 		*count = *count + 1;
 | |
| 	status = read16(state, IQM_AF_PHASE2__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (data == 127)
 | |
| 		*count = *count + 1;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int adc_synchronization(struct drxk_state *state)
 | |
| {
 | |
| 	u16 count = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	status = adc_sync_measurement(state, &count);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (count == 1) {
 | |
| 		/* Try sampling on a different edge */
 | |
| 		u16 clk_neg = 0;
 | |
| 
 | |
| 		status = read16(state, IQM_AF_CLKNEG__A, &clk_neg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		if ((clk_neg & IQM_AF_CLKNEG_CLKNEGDATA__M) ==
 | |
| 			IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) {
 | |
| 			clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
 | |
| 			clk_neg |=
 | |
| 				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG;
 | |
| 		} else {
 | |
| 			clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M));
 | |
| 			clk_neg |=
 | |
| 				IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS;
 | |
| 		}
 | |
| 		status = write16(state, IQM_AF_CLKNEG__A, clk_neg);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = adc_sync_measurement(state, &count);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	if (count < 2)
 | |
| 		status = -EINVAL;
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_frequency_shifter(struct drxk_state *state,
 | |
| 			       u16 intermediate_freqk_hz,
 | |
| 			       s32 tuner_freq_offset, bool is_dtv)
 | |
| {
 | |
| 	bool select_pos_image = false;
 | |
| 	u32 rf_freq_residual = tuner_freq_offset;
 | |
| 	u32 fm_frequency_shift = 0;
 | |
| 	bool tuner_mirror = !state->m_b_mirror_freq_spect;
 | |
| 	u32 adc_freq;
 | |
| 	bool adc_flip;
 | |
| 	int status;
 | |
| 	u32 if_freq_actual;
 | |
| 	u32 sampling_frequency = (u32) (state->m_sys_clock_freq / 3);
 | |
| 	u32 frequency_shift;
 | |
| 	bool image_to_select;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/*
 | |
| 	   Program frequency shifter
 | |
| 	   No need to account for mirroring on RF
 | |
| 	 */
 | |
| 	if (is_dtv) {
 | |
| 		if ((state->m_operation_mode == OM_QAM_ITU_A) ||
 | |
| 		    (state->m_operation_mode == OM_QAM_ITU_C) ||
 | |
| 		    (state->m_operation_mode == OM_DVBT))
 | |
| 			select_pos_image = true;
 | |
| 		else
 | |
| 			select_pos_image = false;
 | |
| 	}
 | |
| 	if (tuner_mirror)
 | |
| 		/* tuner doesn't mirror */
 | |
| 		if_freq_actual = intermediate_freqk_hz +
 | |
| 		    rf_freq_residual + fm_frequency_shift;
 | |
| 	else
 | |
| 		/* tuner mirrors */
 | |
| 		if_freq_actual = intermediate_freqk_hz -
 | |
| 		    rf_freq_residual - fm_frequency_shift;
 | |
| 	if (if_freq_actual > sampling_frequency / 2) {
 | |
| 		/* adc mirrors */
 | |
| 		adc_freq = sampling_frequency - if_freq_actual;
 | |
| 		adc_flip = true;
 | |
| 	} else {
 | |
| 		/* adc doesn't mirror */
 | |
| 		adc_freq = if_freq_actual;
 | |
| 		adc_flip = false;
 | |
| 	}
 | |
| 
 | |
| 	frequency_shift = adc_freq;
 | |
| 	image_to_select = state->m_rfmirror ^ tuner_mirror ^
 | |
| 	    adc_flip ^ select_pos_image;
 | |
| 	state->m_iqm_fs_rate_ofs =
 | |
| 	    Frac28a((frequency_shift), sampling_frequency);
 | |
| 
 | |
| 	if (image_to_select)
 | |
| 		state->m_iqm_fs_rate_ofs = ~state->m_iqm_fs_rate_ofs + 1;
 | |
| 
 | |
| 	/* Program frequency shifter with tuner offset compensation */
 | |
| 	/* frequency_shift += tuner_freq_offset; TODO */
 | |
| 	status = write32(state, IQM_FS_RATE_OFS_LO__A,
 | |
| 			 state->m_iqm_fs_rate_ofs);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int init_agc(struct drxk_state *state, bool is_dtv)
 | |
| {
 | |
| 	u16 ingain_tgt = 0;
 | |
| 	u16 ingain_tgt_min = 0;
 | |
| 	u16 ingain_tgt_max = 0;
 | |
| 	u16 clp_cyclen = 0;
 | |
| 	u16 clp_sum_min = 0;
 | |
| 	u16 clp_dir_to = 0;
 | |
| 	u16 sns_sum_min = 0;
 | |
| 	u16 sns_sum_max = 0;
 | |
| 	u16 clp_sum_max = 0;
 | |
| 	u16 sns_dir_to = 0;
 | |
| 	u16 ki_innergain_min = 0;
 | |
| 	u16 if_iaccu_hi_tgt = 0;
 | |
| 	u16 if_iaccu_hi_tgt_min = 0;
 | |
| 	u16 if_iaccu_hi_tgt_max = 0;
 | |
| 	u16 data = 0;
 | |
| 	u16 fast_clp_ctrl_delay = 0;
 | |
| 	u16 clp_ctrl_mode = 0;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* Common settings */
 | |
| 	sns_sum_max = 1023;
 | |
| 	if_iaccu_hi_tgt_min = 2047;
 | |
| 	clp_cyclen = 500;
 | |
| 	clp_sum_max = 1023;
 | |
| 
 | |
| 	/* AGCInit() not available for DVBT; init done in microcode */
 | |
| 	if (!is_qam(state)) {
 | |
| 		pr_err("%s: mode %d is not DVB-C\n",
 | |
| 		       __func__, state->m_operation_mode);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* FIXME: Analog TV AGC require different settings */
 | |
| 
 | |
| 	/* Standard specific settings */
 | |
| 	clp_sum_min = 8;
 | |
| 	clp_dir_to = (u16) -9;
 | |
| 	clp_ctrl_mode = 0;
 | |
| 	sns_sum_min = 8;
 | |
| 	sns_dir_to = (u16) -9;
 | |
| 	ki_innergain_min = (u16) -1030;
 | |
| 	if_iaccu_hi_tgt_max = 0x2380;
 | |
| 	if_iaccu_hi_tgt = 0x2380;
 | |
| 	ingain_tgt_min = 0x0511;
 | |
| 	ingain_tgt = 0x0511;
 | |
| 	ingain_tgt_max = 5119;
 | |
| 	fast_clp_ctrl_delay = state->m_qam_if_agc_cfg.fast_clip_ctrl_delay;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A,
 | |
| 			 fast_clp_ctrl_delay);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clp_ctrl_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingain_tgt);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingain_tgt_min);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingain_tgt_max);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A,
 | |
| 			 if_iaccu_hi_tgt_min);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A,
 | |
| 			 if_iaccu_hi_tgt_max);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clp_sum_max);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, sns_sum_max);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A,
 | |
| 			 ki_innergain_min);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A,
 | |
| 			 if_iaccu_hi_tgt);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clp_cyclen);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clp_sum_min);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, sns_sum_min);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clp_dir_to);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, sns_dir_to);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Initialize inner-loop KI gain factors */
 | |
| 	status = read16(state, SCU_RAM_AGC_KI__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	data = 0x0657;
 | |
| 	data &= ~SCU_RAM_AGC_KI_RF__M;
 | |
| 	data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B);
 | |
| 	data &= ~SCU_RAM_AGC_KI_IF__M;
 | |
| 	data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B);
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_AGC_KI__A, data);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbtqam_get_acc_pkt_err(struct drxk_state *state, u16 *packet_err)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (packet_err == NULL)
 | |
| 		status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
 | |
| 	else
 | |
| 		status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A,
 | |
| 				packet_err);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbt_sc_command(struct drxk_state *state,
 | |
| 			 u16 cmd, u16 subcmd,
 | |
| 			 u16 param0, u16 param1, u16 param2,
 | |
| 			 u16 param3, u16 param4)
 | |
| {
 | |
| 	u16 cur_cmd = 0;
 | |
| 	u16 err_code = 0;
 | |
| 	u16 retry_cnt = 0;
 | |
| 	u16 sc_exec = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_exec);
 | |
| 	if (sc_exec != 1) {
 | |
| 		/* SC is not running */
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Wait until sc is ready to receive command */
 | |
| 	retry_cnt = 0;
 | |
| 	do {
 | |
| 		usleep_range(1000, 2000);
 | |
| 		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd);
 | |
| 		retry_cnt++;
 | |
| 	} while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES));
 | |
| 	if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0))
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Write sub-command */
 | |
| 	switch (cmd) {
 | |
| 		/* All commands using sub-cmd */
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROC_START:
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Do nothing */
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* Write needed parameters and the command */
 | |
| 	status = 0;
 | |
| 	switch (cmd) {
 | |
| 		/* All commands using 5 parameters */
 | |
| 		/* All commands using 4 parameters */
 | |
| 		/* All commands using 3 parameters */
 | |
| 		/* All commands using 2 parameters */
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROC_START:
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
 | |
| 		status |= write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1);
 | |
| 		fallthrough;	/* All commands using 1 parameters */
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
 | |
| 	case OFDM_SC_RA_RAM_CMD_USER_IO:
 | |
| 		status |= write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0);
 | |
| 		fallthrough;	/* All commands using 0 parameters */
 | |
| 	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
 | |
| 	case OFDM_SC_RA_RAM_CMD_NULL:
 | |
| 		/* Write command */
 | |
| 		status |= write16(state, OFDM_SC_RA_RAM_CMD__A, cmd);
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Unknown command */
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Wait until sc is ready processing command */
 | |
| 	retry_cnt = 0;
 | |
| 	do {
 | |
| 		usleep_range(1000, 2000);
 | |
| 		status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd);
 | |
| 		retry_cnt++;
 | |
| 	} while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES));
 | |
| 	if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0))
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Check for illegal cmd */
 | |
| 	status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &err_code);
 | |
| 	if (err_code == 0xFFFF) {
 | |
| 		/* illegal command */
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Retrieve results parameters from SC */
 | |
| 	switch (cmd) {
 | |
| 		/* All commands yielding 5 results */
 | |
| 		/* All commands yielding 4 results */
 | |
| 		/* All commands yielding 3 results */
 | |
| 		/* All commands yielding 2 results */
 | |
| 		/* All commands yielding 1 result */
 | |
| 	case OFDM_SC_RA_RAM_CMD_USER_IO:
 | |
| 	case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM:
 | |
| 		status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0));
 | |
| 		break;
 | |
| 		/* All commands yielding 0 results */
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING:
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_TIMER:
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROC_START:
 | |
| 	case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM:
 | |
| 	case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM:
 | |
| 	case OFDM_SC_RA_RAM_CMD_NULL:
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Unknown command */
 | |
| 		status = -EINVAL;
 | |
| 		break;
 | |
| 	}			/* switch (cmd->cmd) */
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int power_up_dvbt(struct drxk_state *state)
 | |
| {
 | |
| 	enum drx_power_mode power_mode = DRX_POWER_UP;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = ctrl_power_mode(state, &power_mode);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbt_ctrl_set_inc_enable(struct drxk_state *state, bool *enabled)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (*enabled)
 | |
| 		status = write16(state, IQM_CF_BYPASSDET__A, 0);
 | |
| 	else
 | |
| 		status = write16(state, IQM_CF_BYPASSDET__A, 1);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| #define DEFAULT_FR_THRES_8K     4000
 | |
| static int dvbt_ctrl_set_fr_enable(struct drxk_state *state, bool *enabled)
 | |
| {
 | |
| 
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (*enabled) {
 | |
| 		/* write mask to 1 */
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A,
 | |
| 				   DEFAULT_FR_THRES_8K);
 | |
| 	} else {
 | |
| 		/* write mask to 0 */
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0);
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbt_ctrl_set_echo_threshold(struct drxk_state *state,
 | |
| 				struct drxk_cfg_dvbt_echo_thres_t *echo_thres)
 | |
| {
 | |
| 	u16 data = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	switch (echo_thres->fft_mode) {
 | |
| 	case DRX_FFTMODE_2K:
 | |
| 		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M;
 | |
| 		data |= ((echo_thres->threshold <<
 | |
| 			OFDM_SC_RA_RAM_ECHO_THRES_2K__B)
 | |
| 			& (OFDM_SC_RA_RAM_ECHO_THRES_2K__M));
 | |
| 		break;
 | |
| 	case DRX_FFTMODE_8K:
 | |
| 		data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M;
 | |
| 		data |= ((echo_thres->threshold <<
 | |
| 			OFDM_SC_RA_RAM_ECHO_THRES_8K__B)
 | |
| 			& (OFDM_SC_RA_RAM_ECHO_THRES_8K__M));
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int dvbt_ctrl_set_sqi_speed(struct drxk_state *state,
 | |
| 			       enum drxk_cfg_dvbt_sqi_speed *speed)
 | |
| {
 | |
| 	int status = -EINVAL;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	switch (*speed) {
 | |
| 	case DRXK_DVBT_SQI_SPEED_FAST:
 | |
| 	case DRXK_DVBT_SQI_SPEED_MEDIUM:
 | |
| 	case DRXK_DVBT_SQI_SPEED_SLOW:
 | |
| 		break;
 | |
| 	default:
 | |
| 		goto error;
 | |
| 	}
 | |
| 	status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A,
 | |
| 			   (u16) *speed);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Activate DVBT specific presets
 | |
| * \param demod instance of demodulator.
 | |
| * \return DRXStatus_t.
 | |
| *
 | |
| * Called in DVBTSetStandard
 | |
| *
 | |
| */
 | |
| static int dvbt_activate_presets(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 	bool setincenable = false;
 | |
| 	bool setfrenable = true;
 | |
| 
 | |
| 	struct drxk_cfg_dvbt_echo_thres_t echo_thres2k = { 0, DRX_FFTMODE_2K };
 | |
| 	struct drxk_cfg_dvbt_echo_thres_t echo_thres8k = { 0, DRX_FFTMODE_8K };
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = dvbt_ctrl_set_inc_enable(state, &setincenable);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = dvbt_ctrl_set_fr_enable(state, &setfrenable);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = dvbt_ctrl_set_echo_threshold(state, &echo_thres2k);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = dvbt_ctrl_set_echo_threshold(state, &echo_thres8k);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A,
 | |
| 			 state->m_dvbt_if_agc_cfg.ingain_tgt_max);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Initialize channelswitch-independent settings for DVBT.
 | |
| * \param demod instance of demodulator.
 | |
| * \return DRXStatus_t.
 | |
| *
 | |
| * For ROM code channel filter taps are loaded from the bootloader. For microcode
 | |
| * the DVB-T taps from the drxk_filters.h are used.
 | |
| */
 | |
| static int set_dvbt_standard(struct drxk_state *state,
 | |
| 			   enum operation_mode o_mode)
 | |
| {
 | |
| 	u16 cmd_result = 0;
 | |
| 	u16 data = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	power_up_dvbt(state);
 | |
| 	/* added antenna switch */
 | |
| 	switch_antenna_to_dvbt(state);
 | |
| 	/* send OFDM reset command */
 | |
| 	status = scu_command(state,
 | |
| 			     SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 			     | SCU_RAM_COMMAND_CMD_DEMOD_RESET,
 | |
| 			     0, NULL, 1, &cmd_result);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* send OFDM setenv command */
 | |
| 	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 			     | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV,
 | |
| 			     0, NULL, 1, &cmd_result);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* reset datapath for OFDM, processors first */
 | |
| 	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* IQM setup */
 | |
| 	/* synchronize on ofdstate->m_festart */
 | |
| 	status = write16(state, IQM_AF_UPD_SEL__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* window size for clipping ADC detection */
 | |
| 	status = write16(state, IQM_AF_CLP_LEN__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* window size for sense pre-SAW detection */
 | |
| 	status = write16(state, IQM_AF_SNS_LEN__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* sense threshold for sense pre-SAW detection */
 | |
| 	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = set_iqm_af(state, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_AF_AGC_RF__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Impulse noise cruncher setup */
 | |
| 	status = write16(state, IQM_AF_INC_LCT__A, 0);	/* crunch in IQM_CF */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_DET_LCT__A, 0);	/* detect in IQM_CF */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_WND_LEN__A, 3);	/* peak detector window length */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_RC_STRETCH__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_DS_ENA__A, 0x4);	/* decimate output 2 */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_SCALE__A, 1600);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_SCALE_SH__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* virtual clipping threshold for clipping ADC detection */
 | |
| 	status = write16(state, IQM_AF_CLP_TH__A, 448);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_DATATH__A, 495);	/* crunching threshold */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT,
 | |
| 			      DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_CF_PKDTH__A, 2);	/* peak detector threshold */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* enable power measurement interrupt */
 | |
| 	status = write16(state, IQM_CF_COMM_INT_MSK__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* IQM will not be reset from here, sync ADC and update/init AGC */
 | |
| 	status = adc_synchronization(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = set_pre_saw(state, &state->m_dvbt_pre_saw_cfg);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Halt SCU to enable safe non-atomic accesses */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = set_agc_rf(state, &state->m_dvbt_rf_agc_cfg, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = set_agc_if(state, &state->m_dvbt_if_agc_cfg, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Set Noise Estimation notch width and enable DC fix */
 | |
| 	status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M;
 | |
| 	status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Activate SCU to enable SCU commands */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (!state->m_drxk_a3_rom_code) {
 | |
| 		/* AGCInit() is not done for DVBT, so set agcfast_clip_ctrl_delay  */
 | |
| 		status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A,
 | |
| 				 state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 
 | |
| 	/* OFDM_SC setup */
 | |
| #ifdef COMPILE_FOR_NONRT
 | |
| 	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #endif
 | |
| 
 | |
| 	/* FEC setup */
 | |
| 	status = write16(state, FEC_DI_INPUT_CTL__A, 1);	/* OFDM input */
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| #ifdef COMPILE_FOR_NONRT
 | |
| 	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #else
 | |
| 	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #endif
 | |
| 	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Setup MPEG bus */
 | |
| 	status = mpegts_dto_setup(state, OM_DVBT);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Set DVBT Presets */
 | |
| 	status = dvbt_activate_presets(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| /*
 | |
| * \brief start dvbt demodulating for channel.
 | |
| * \param demod instance of demodulator.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int dvbt_start(struct drxk_state *state)
 | |
| {
 | |
| 	u16 param1;
 | |
| 	int status;
 | |
| 	/* drxk_ofdm_sc_cmd_t scCmd; */
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* start correct processes to get in lock */
 | |
| 	/* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */
 | |
| 	param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN;
 | |
| 	status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0,
 | |
| 				 OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1,
 | |
| 				 0, 0, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* start FEC OC */
 | |
| 	status = mpegts_start(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Set up dvbt demodulator for channel.
 | |
| * \param demod instance of demodulator.
 | |
| * \return DRXStatus_t.
 | |
| * // original DVBTSetChannel()
 | |
| */
 | |
| static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
 | |
| 		   s32 tuner_freq_offset)
 | |
| {
 | |
| 	u16 cmd_result = 0;
 | |
| 	u16 transmission_params = 0;
 | |
| 	u32 iqm_rc_rate_ofs = 0;
 | |
| 	u32 bandwidth = 0;
 | |
| 	u16 param1;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "IF =%d, TFO = %d\n",
 | |
| 		intermediate_freqk_hz, tuner_freq_offset);
 | |
| 
 | |
| 	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 			    | SCU_RAM_COMMAND_CMD_DEMOD_STOP,
 | |
| 			    0, NULL, 1, &cmd_result);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Halt SCU to enable safe non-atomic accesses */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Stop processors */
 | |
| 	status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Mandatory fix, always stop CP, required to set spl offset back to
 | |
| 		hardware default (is set to 0 by ucode during pilot detection */
 | |
| 	status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*== Write channel settings to device ================================*/
 | |
| 
 | |
| 	/* mode */
 | |
| 	switch (state->props.transmission_mode) {
 | |
| 	case TRANSMISSION_MODE_AUTO:
 | |
| 	case TRANSMISSION_MODE_8K:
 | |
| 	default:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K;
 | |
| 		break;
 | |
| 	case TRANSMISSION_MODE_2K:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* guard */
 | |
| 	switch (state->props.guard_interval) {
 | |
| 	default:
 | |
| 	case GUARD_INTERVAL_AUTO: /* try first guess DRX_GUARD_1DIV4 */
 | |
| 	case GUARD_INTERVAL_1_4:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4;
 | |
| 		break;
 | |
| 	case GUARD_INTERVAL_1_32:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32;
 | |
| 		break;
 | |
| 	case GUARD_INTERVAL_1_16:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16;
 | |
| 		break;
 | |
| 	case GUARD_INTERVAL_1_8:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* hierarchy */
 | |
| 	switch (state->props.hierarchy) {
 | |
| 	case HIERARCHY_AUTO:
 | |
| 	case HIERARCHY_NONE:
 | |
| 	default:	/* try first guess SC_RA_RAM_OP_PARAM_HIER_NO */
 | |
| 	case HIERARCHY_1:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1;
 | |
| 		break;
 | |
| 	case HIERARCHY_2:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2;
 | |
| 		break;
 | |
| 	case HIERARCHY_4:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 
 | |
| 	/* modulation */
 | |
| 	switch (state->props.modulation) {
 | |
| 	case QAM_AUTO:
 | |
| 	default:	/* try first guess DRX_CONSTELLATION_QAM64 */
 | |
| 	case QAM_64:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64;
 | |
| 		break;
 | |
| 	case QPSK:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK;
 | |
| 		break;
 | |
| 	case QAM_16:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16;
 | |
| 		break;
 | |
| 	}
 | |
| #if 0
 | |
| 	/* No hierarchical channels support in BDA */
 | |
| 	/* Priority (only for hierarchical channels) */
 | |
| 	switch (channel->priority) {
 | |
| 	case DRX_PRIORITY_LOW:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO;
 | |
| 		WR16(dev_addr, OFDM_EC_SB_PRIOR__A,
 | |
| 			OFDM_EC_SB_PRIOR_LO);
 | |
| 		break;
 | |
| 	case DRX_PRIORITY_HIGH:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
 | |
| 		WR16(dev_addr, OFDM_EC_SB_PRIOR__A,
 | |
| 			OFDM_EC_SB_PRIOR_HI));
 | |
| 		break;
 | |
| 	case DRX_PRIORITY_UNKNOWN:
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 		goto error;
 | |
| 	}
 | |
| #else
 | |
| 	/* Set Priority high */
 | |
| 	transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI;
 | |
| 	status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #endif
 | |
| 
 | |
| 	/* coderate */
 | |
| 	switch (state->props.code_rate_HP) {
 | |
| 	case FEC_AUTO:
 | |
| 	default:	/* try first guess DRX_CODERATE_2DIV3 */
 | |
| 	case FEC_2_3:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3;
 | |
| 		break;
 | |
| 	case FEC_1_2:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2;
 | |
| 		break;
 | |
| 	case FEC_3_4:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4;
 | |
| 		break;
 | |
| 	case FEC_5_6:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6;
 | |
| 		break;
 | |
| 	case FEC_7_8:
 | |
| 		transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * SAW filter selection: normally not necessary, but if wanted
 | |
| 	 * the application can select a SAW filter via the driver by
 | |
| 	 * using UIOs
 | |
| 	 */
 | |
| 
 | |
| 	/* First determine real bandwidth (Hz) */
 | |
| 	/* Also set delay for impulse noise cruncher */
 | |
| 	/*
 | |
| 	 * Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is
 | |
| 	 * changed by SC for fix for some 8K,1/8 guard but is restored by
 | |
| 	 * InitEC and ResetEC functions
 | |
| 	 */
 | |
| 	switch (state->props.bandwidth_hz) {
 | |
| 	case 0:
 | |
| 		state->props.bandwidth_hz = 8000000;
 | |
| 		fallthrough;
 | |
| 	case 8000000:
 | |
| 		bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
 | |
| 				 3052);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* cochannel protection for PAL 8 MHz */
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
 | |
| 				 7);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
 | |
| 				 7);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
 | |
| 				 7);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
 | |
| 				 1);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	case 7000000:
 | |
| 		bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
 | |
| 				 3491);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* cochannel protection for PAL 7 MHz */
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
 | |
| 				 8);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
 | |
| 				 8);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
 | |
| 				 4);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
 | |
| 				 1);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	case 6000000:
 | |
| 		bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A,
 | |
| 				 4073);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* cochannel protection for NTSC 6 MHz */
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A,
 | |
| 				 19);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A,
 | |
| 				 19);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A,
 | |
| 				 14);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A,
 | |
| 				 1);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	if (iqm_rc_rate_ofs == 0) {
 | |
| 		/* Now compute IQM_RC_RATE_OFS
 | |
| 			(((SysFreq/BandWidth)/2)/2) -1) * 2^23)
 | |
| 			=>
 | |
| 			((SysFreq / BandWidth) * (2^21)) - (2^23)
 | |
| 			*/
 | |
| 		/* (SysFreq / BandWidth) * (2^28)  */
 | |
| 		/*
 | |
| 		 * assert (MAX(sysClk)/MIN(bandwidth) < 16)
 | |
| 		 *	=> assert(MAX(sysClk) < 16*MIN(bandwidth))
 | |
| 		 *	=> assert(109714272 > 48000000) = true
 | |
| 		 * so Frac 28 can be used
 | |
| 		 */
 | |
| 		iqm_rc_rate_ofs = Frac28a((u32)
 | |
| 					((state->m_sys_clock_freq *
 | |
| 						1000) / 3), bandwidth);
 | |
| 		/* (SysFreq / BandWidth) * (2^21), rounding before truncating */
 | |
| 		if ((iqm_rc_rate_ofs & 0x7fL) >= 0x40)
 | |
| 			iqm_rc_rate_ofs += 0x80L;
 | |
| 		iqm_rc_rate_ofs = iqm_rc_rate_ofs >> 7;
 | |
| 		/* ((SysFreq / BandWidth) * (2^21)) - (2^23)  */
 | |
| 		iqm_rc_rate_ofs = iqm_rc_rate_ofs - (1 << 23);
 | |
| 	}
 | |
| 
 | |
| 	iqm_rc_rate_ofs &=
 | |
| 		((((u32) IQM_RC_RATE_OFS_HI__M) <<
 | |
| 		IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M);
 | |
| 	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate_ofs);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Bandwidth setting done */
 | |
| 
 | |
| #if 0
 | |
| 	status = dvbt_set_frequency_shift(demod, channel, tuner_offset);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #endif
 | |
| 	status = set_frequency_shifter(state, intermediate_freqk_hz,
 | |
| 				       tuner_freq_offset, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*== start SC, write channel settings to SC ==========================*/
 | |
| 
 | |
| 	/* Activate SCU to enable SCU commands */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Enable SC after setting all other parameters */
 | |
| 	status = write16(state, OFDM_SC_COMM_STATE__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, OFDM_SC_COMM_EXEC__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM
 | |
| 			     | SCU_RAM_COMMAND_CMD_DEMOD_START,
 | |
| 			     0, NULL, 1, &cmd_result);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Write SC parameter registers, set all AUTO flags in operation mode */
 | |
| 	param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M |
 | |
| 			OFDM_SC_RA_RAM_OP_AUTO_GUARD__M |
 | |
| 			OFDM_SC_RA_RAM_OP_AUTO_CONST__M |
 | |
| 			OFDM_SC_RA_RAM_OP_AUTO_HIER__M |
 | |
| 			OFDM_SC_RA_RAM_OP_AUTO_RATE__M);
 | |
| 	status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM,
 | |
| 				0, transmission_params, param1, 0, 0, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (!state->m_drxk_a3_rom_code)
 | |
| 		status = dvbt_ctrl_set_sqi_speed(state, &state->m_sqi_speed);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Retrieve lock status .
 | |
| * \param demod    Pointer to demodulator instance.
 | |
| * \param lockStat Pointer to lock status structure.
 | |
| * \return DRXStatus_t.
 | |
| *
 | |
| */
 | |
| static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status)
 | |
| {
 | |
| 	int status;
 | |
| 	const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M |
 | |
| 				    OFDM_SC_RA_RAM_LOCK_FEC__M);
 | |
| 	const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M);
 | |
| 	const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M;
 | |
| 
 | |
| 	u16 sc_ra_ram_lock = 0;
 | |
| 	u16 sc_comm_exec = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	*p_lock_status = NOT_LOCKED;
 | |
| 	/* driver 0.9.0 */
 | |
| 	/* Check if SC is running */
 | |
| 	status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_comm_exec);
 | |
| 	if (status < 0)
 | |
| 		goto end;
 | |
| 	if (sc_comm_exec == OFDM_SC_COMM_EXEC_STOP)
 | |
| 		goto end;
 | |
| 
 | |
| 	status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &sc_ra_ram_lock);
 | |
| 	if (status < 0)
 | |
| 		goto end;
 | |
| 
 | |
| 	if ((sc_ra_ram_lock & mpeg_lock_mask) == mpeg_lock_mask)
 | |
| 		*p_lock_status = MPEG_LOCK;
 | |
| 	else if ((sc_ra_ram_lock & fec_lock_mask) == fec_lock_mask)
 | |
| 		*p_lock_status = FEC_LOCK;
 | |
| 	else if ((sc_ra_ram_lock & demod_lock_mask) == demod_lock_mask)
 | |
| 		*p_lock_status = DEMOD_LOCK;
 | |
| 	else if (sc_ra_ram_lock & OFDM_SC_RA_RAM_LOCK_NODVBT__M)
 | |
| 		*p_lock_status = NEVER_LOCK;
 | |
| end:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int power_up_qam(struct drxk_state *state)
 | |
| {
 | |
| 	enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = ctrl_power_mode(state, &power_mode);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| /* Power Down QAM */
 | |
| static int power_down_qam(struct drxk_state *state)
 | |
| {
 | |
| 	u16 data = 0;
 | |
| 	u16 cmd_result;
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	status = read16(state, SCU_COMM_EXEC__A, &data);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	if (data == SCU_COMM_EXEC_ACTIVE) {
 | |
| 		/*
 | |
| 			STOP demodulator
 | |
| 			QAM and HW blocks
 | |
| 			*/
 | |
| 		/* stop all comstate->m_exec */
 | |
| 		status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_STOP,
 | |
| 				     0, NULL, 1, &cmd_result);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 	/* powerdown AFE                   */
 | |
| 	status = set_iqm_af(state, false);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Setup of the QAM Measurement intervals for signal quality
 | |
| * \param demod instance of demod.
 | |
| * \param modulation current modulation.
 | |
| * \return DRXStatus_t.
 | |
| *
 | |
| *  NOTE:
 | |
| *  Take into account that for certain settings the errorcounters can overflow.
 | |
| *  The implementation does not check this.
 | |
| *
 | |
| */
 | |
| static int set_qam_measurement(struct drxk_state *state,
 | |
| 			     enum e_drxk_constellation modulation,
 | |
| 			     u32 symbol_rate)
 | |
| {
 | |
| 	u32 fec_bits_desired = 0;	/* BER accounting period */
 | |
| 	u32 fec_rs_period_total = 0;	/* Total period */
 | |
| 	u16 fec_rs_prescale = 0;	/* ReedSolomon Measurement Prescale */
 | |
| 	u16 fec_rs_period = 0;	/* Value for corresponding I2C register */
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	fec_rs_prescale = 1;
 | |
| 	/* fec_bits_desired = symbol_rate [kHz] *
 | |
| 		FrameLenght [ms] *
 | |
| 		(modulation + 1) *
 | |
| 		SyncLoss (== 1) *
 | |
| 		ViterbiLoss (==1)
 | |
| 		*/
 | |
| 	switch (modulation) {
 | |
| 	case DRX_CONSTELLATION_QAM16:
 | |
| 		fec_bits_desired = 4 * symbol_rate;
 | |
| 		break;
 | |
| 	case DRX_CONSTELLATION_QAM32:
 | |
| 		fec_bits_desired = 5 * symbol_rate;
 | |
| 		break;
 | |
| 	case DRX_CONSTELLATION_QAM64:
 | |
| 		fec_bits_desired = 6 * symbol_rate;
 | |
| 		break;
 | |
| 	case DRX_CONSTELLATION_QAM128:
 | |
| 		fec_bits_desired = 7 * symbol_rate;
 | |
| 		break;
 | |
| 	case DRX_CONSTELLATION_QAM256:
 | |
| 		fec_bits_desired = 8 * symbol_rate;
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	fec_bits_desired /= 1000;	/* symbol_rate [Hz] -> symbol_rate [kHz] */
 | |
| 	fec_bits_desired *= 500;	/* meas. period [ms] */
 | |
| 
 | |
| 	/* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */
 | |
| 	/* fec_rs_period_total = fec_bits_desired / 1632 */
 | |
| 	fec_rs_period_total = (fec_bits_desired / 1632UL) + 1;	/* roughly ceil */
 | |
| 
 | |
| 	/* fec_rs_period_total =  fec_rs_prescale * fec_rs_period  */
 | |
| 	fec_rs_prescale = 1 + (u16) (fec_rs_period_total >> 16);
 | |
| 	if (fec_rs_prescale == 0) {
 | |
| 		/* Divide by zero (though impossible) */
 | |
| 		status = -EINVAL;
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 	fec_rs_period =
 | |
| 		((u16) fec_rs_period_total +
 | |
| 		(fec_rs_prescale >> 1)) / fec_rs_prescale;
 | |
| 
 | |
| 	/* write corresponding registers */
 | |
| 	status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fec_rs_period);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A,
 | |
| 			 fec_rs_prescale);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fec_rs_period);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_qam16(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* QAM Equalizer Setup */
 | |
| 	/* Equalizer */
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Decision Feedback Equalizer */
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN0__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN1__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN2__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN3__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN4__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM Slicer Settings */
 | |
| 	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
 | |
| 			 DRXK_QAM_SL_SIG_POWER_QAM16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM Loop Controller Coeficients */
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM State Machine (FSM) Thresholds */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM FSM Tracking Parameters */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief QAM32 specific setup
 | |
| * \param demod instance of demod.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int set_qam32(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* QAM Equalizer Setup */
 | |
| 	/* Equalizer */
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Decision Feedback Equalizer */
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN0__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN1__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN2__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN3__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM Slicer Settings */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
 | |
| 			 DRXK_QAM_SL_SIG_POWER_QAM32);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM Loop Controller Coeficients */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM State Machine (FSM) Thresholds */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM FSM Tracking Parameters */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief QAM64 specific setup
 | |
| * \param demod instance of demod.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int set_qam64(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* QAM Equalizer Setup */
 | |
| 	/* Equalizer */
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Decision Feedback Equalizer */
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN0__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN1__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN2__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN3__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN4__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM Slicer Settings */
 | |
| 	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
 | |
| 			 DRXK_QAM_SL_SIG_POWER_QAM64);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM Loop Controller Coeficients */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM State Machine (FSM) Thresholds */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM FSM Tracking Parameters */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief QAM128 specific setup
 | |
| * \param demod: instance of demod.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int set_qam128(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* QAM Equalizer Setup */
 | |
| 	/* Equalizer */
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Decision Feedback Equalizer */
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN0__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN1__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN2__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN3__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN4__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_SY_SYNC_HWM__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_AWM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM Slicer Settings */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
 | |
| 			 DRXK_QAM_SL_SIG_POWER_QAM128);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM Loop Controller Coeficients */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM State Machine (FSM) Thresholds */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM FSM Tracking Parameters */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief QAM256 specific setup
 | |
| * \param demod: instance of demod.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int set_qam256(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* QAM Equalizer Setup */
 | |
| 	/* Equalizer */
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Decision Feedback Equalizer */
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN0__A, 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN1__A, 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN2__A, 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN3__A, 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN4__A, 6);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_DQ_QUAL_FUN5__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_SY_SYNC_HWM__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_AWM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_SYNC_LWM__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* QAM Slicer Settings */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A,
 | |
| 			 DRXK_QAM_SL_SIG_POWER_QAM256);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM Loop Controller Coeficients */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM State Machine (FSM) Thresholds */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* QAM FSM Tracking Parameters */
 | |
| 
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| /*============================================================================*/
 | |
| /*
 | |
| * \brief Reset QAM block.
 | |
| * \param demod:   instance of demod.
 | |
| * \param channel: pointer to channel data.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int qam_reset_qam(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 cmd_result;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* Stop QAM comstate->m_exec */
 | |
| 	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 			     | SCU_RAM_COMMAND_CMD_DEMOD_RESET,
 | |
| 			     0, NULL, 1, &cmd_result);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Set QAM symbolrate.
 | |
| * \param demod:   instance of demod.
 | |
| * \param channel: pointer to channel data.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| static int qam_set_symbolrate(struct drxk_state *state)
 | |
| {
 | |
| 	u32 adc_frequency = 0;
 | |
| 	u32 symb_freq = 0;
 | |
| 	u32 iqm_rc_rate = 0;
 | |
| 	u16 ratesel = 0;
 | |
| 	u32 lc_symb_rate = 0;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* Select & calculate correct IQM rate */
 | |
| 	adc_frequency = (state->m_sys_clock_freq * 1000) / 3;
 | |
| 	ratesel = 0;
 | |
| 	if (state->props.symbol_rate <= 1188750)
 | |
| 		ratesel = 3;
 | |
| 	else if (state->props.symbol_rate <= 2377500)
 | |
| 		ratesel = 2;
 | |
| 	else if (state->props.symbol_rate <= 4755000)
 | |
| 		ratesel = 1;
 | |
| 	status = write16(state, IQM_FD_RATESEL__A, ratesel);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*
 | |
| 		IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23)
 | |
| 		*/
 | |
| 	symb_freq = state->props.symbol_rate * (1 << ratesel);
 | |
| 	if (symb_freq == 0) {
 | |
| 		/* Divide by zero */
 | |
| 		status = -EINVAL;
 | |
| 		goto error;
 | |
| 	}
 | |
| 	iqm_rc_rate = (adc_frequency / symb_freq) * (1 << 21) +
 | |
| 		(Frac28a((adc_frequency % symb_freq), symb_freq) >> 7) -
 | |
| 		(1 << 23);
 | |
| 	status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	state->m_iqm_rc_rate = iqm_rc_rate;
 | |
| 	/*
 | |
| 		LcSymbFreq = round (.125 *  symbolrate / adc_freq * (1<<15))
 | |
| 		*/
 | |
| 	symb_freq = state->props.symbol_rate;
 | |
| 	if (adc_frequency == 0) {
 | |
| 		/* Divide by zero */
 | |
| 		status = -EINVAL;
 | |
| 		goto error;
 | |
| 	}
 | |
| 	lc_symb_rate = (symb_freq / adc_frequency) * (1 << 12) +
 | |
| 		(Frac28a((symb_freq % adc_frequency), adc_frequency) >>
 | |
| 		16);
 | |
| 	if (lc_symb_rate > 511)
 | |
| 		lc_symb_rate = 511;
 | |
| 	status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lc_symb_rate);
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| /*============================================================================*/
 | |
| 
 | |
| /*
 | |
| * \brief Get QAM lock status.
 | |
| * \param demod:   instance of demod.
 | |
| * \param channel: pointer to channel data.
 | |
| * \return DRXStatus_t.
 | |
| */
 | |
| 
 | |
| static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 result[2] = { 0, 0 };
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	*p_lock_status = NOT_LOCKED;
 | |
| 	status = scu_command(state,
 | |
| 			SCU_RAM_COMMAND_STANDARD_QAM |
 | |
| 			SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2,
 | |
| 			result);
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) {
 | |
| 		/* 0x0000 NOT LOCKED */
 | |
| 	} else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) {
 | |
| 		/* 0x4000 DEMOD LOCKED */
 | |
| 		*p_lock_status = DEMOD_LOCK;
 | |
| 	} else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) {
 | |
| 		/* 0x8000 DEMOD + FEC LOCKED (system lock) */
 | |
| 		*p_lock_status = MPEG_LOCK;
 | |
| 	} else {
 | |
| 		/* 0xC000 NEVER LOCKED */
 | |
| 		/* (system will never be able to lock to the signal) */
 | |
| 		/*
 | |
| 		 * TODO: check this, intermediate & standard specific lock
 | |
| 		 * states are not taken into account here
 | |
| 		 */
 | |
| 		*p_lock_status = NEVER_LOCK;
 | |
| 	}
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| #define QAM_MIRROR__M         0x03
 | |
| #define QAM_MIRROR_NORMAL     0x00
 | |
| #define QAM_MIRRORED          0x01
 | |
| #define QAM_MIRROR_AUTO_ON    0x02
 | |
| #define QAM_LOCKRANGE__M      0x10
 | |
| #define QAM_LOCKRANGE_NORMAL  0x10
 | |
| 
 | |
| static int qam_demodulator_command(struct drxk_state *state,
 | |
| 				 int number_of_parameters)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 cmd_result;
 | |
| 	u16 set_param_parameters[4] = { 0, 0, 0, 0 };
 | |
| 
 | |
| 	set_param_parameters[0] = state->m_constellation;	/* modulation     */
 | |
| 	set_param_parameters[1] = DRXK_QAM_I12_J17;	/* interleave mode   */
 | |
| 
 | |
| 	if (number_of_parameters == 2) {
 | |
| 		u16 set_env_parameters[1] = { 0 };
 | |
| 
 | |
| 		if (state->m_operation_mode == OM_QAM_ITU_C)
 | |
| 			set_env_parameters[0] = QAM_TOP_ANNEX_C;
 | |
| 		else
 | |
| 			set_env_parameters[0] = QAM_TOP_ANNEX_A;
 | |
| 
 | |
| 		status = scu_command(state,
 | |
| 				     SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV,
 | |
| 				     1, set_env_parameters, 1, &cmd_result);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		status = scu_command(state,
 | |
| 				     SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
 | |
| 				     number_of_parameters, set_param_parameters,
 | |
| 				     1, &cmd_result);
 | |
| 	} else if (number_of_parameters == 4) {
 | |
| 		if (state->m_operation_mode == OM_QAM_ITU_C)
 | |
| 			set_param_parameters[2] = QAM_TOP_ANNEX_C;
 | |
| 		else
 | |
| 			set_param_parameters[2] = QAM_TOP_ANNEX_A;
 | |
| 
 | |
| 		set_param_parameters[3] |= (QAM_MIRROR_AUTO_ON);
 | |
| 		/* Env parameters */
 | |
| 		/* check for LOCKRANGE Extended */
 | |
| 		/* set_param_parameters[3] |= QAM_LOCKRANGE_NORMAL; */
 | |
| 
 | |
| 		status = scu_command(state,
 | |
| 				     SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 				     | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM,
 | |
| 				     number_of_parameters, set_param_parameters,
 | |
| 				     1, &cmd_result);
 | |
| 	} else {
 | |
| 		pr_warn("Unknown QAM demodulator parameter count %d\n",
 | |
| 			number_of_parameters);
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_warn("Warning %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz,
 | |
| 		  s32 tuner_freq_offset)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 cmd_result;
 | |
| 	int qam_demod_param_count = state->qam_demod_parameter_count;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/*
 | |
| 	 * STEP 1: reset demodulator
 | |
| 	 *	resets FEC DI and FEC RS
 | |
| 	 *	resets QAM block
 | |
| 	 *	resets SCU variables
 | |
| 	 */
 | |
| 	status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = qam_reset_qam(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*
 | |
| 	 * STEP 2: configure demodulator
 | |
| 	 *	-set params; resets IQM,QAM,FEC HW; initializes some
 | |
| 	 *       SCU variables
 | |
| 	 */
 | |
| 	status = qam_set_symbolrate(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Set params */
 | |
| 	switch (state->props.modulation) {
 | |
| 	case QAM_256:
 | |
| 		state->m_constellation = DRX_CONSTELLATION_QAM256;
 | |
| 		break;
 | |
| 	case QAM_AUTO:
 | |
| 	case QAM_64:
 | |
| 		state->m_constellation = DRX_CONSTELLATION_QAM64;
 | |
| 		break;
 | |
| 	case QAM_16:
 | |
| 		state->m_constellation = DRX_CONSTELLATION_QAM16;
 | |
| 		break;
 | |
| 	case QAM_32:
 | |
| 		state->m_constellation = DRX_CONSTELLATION_QAM32;
 | |
| 		break;
 | |
| 	case QAM_128:
 | |
| 		state->m_constellation = DRX_CONSTELLATION_QAM128;
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 		break;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Use the 4-parameter if it's requested or we're probing for
 | |
| 	 * the correct command. */
 | |
| 	if (state->qam_demod_parameter_count == 4
 | |
| 		|| !state->qam_demod_parameter_count) {
 | |
| 		qam_demod_param_count = 4;
 | |
| 		status = qam_demodulator_command(state, qam_demod_param_count);
 | |
| 	}
 | |
| 
 | |
| 	/* Use the 2-parameter command if it was requested or if we're
 | |
| 	 * probing for the correct command and the 4-parameter command
 | |
| 	 * failed. */
 | |
| 	if (state->qam_demod_parameter_count == 2
 | |
| 		|| (!state->qam_demod_parameter_count && status < 0)) {
 | |
| 		qam_demod_param_count = 2;
 | |
| 		status = qam_demodulator_command(state, qam_demod_param_count);
 | |
| 	}
 | |
| 
 | |
| 	if (status < 0) {
 | |
| 		dprintk(1, "Could not set demodulator parameters.\n");
 | |
| 		dprintk(1,
 | |
| 			"Make sure qam_demod_parameter_count (%d) is correct for your firmware (%s).\n",
 | |
| 			state->qam_demod_parameter_count,
 | |
| 			state->microcode_name);
 | |
| 		goto error;
 | |
| 	} else if (!state->qam_demod_parameter_count) {
 | |
| 		dprintk(1,
 | |
| 			"Auto-probing the QAM command parameters was successful - using %d parameters.\n",
 | |
| 			qam_demod_param_count);
 | |
| 
 | |
| 		/*
 | |
| 		 * One of our commands was successful. We don't need to
 | |
| 		 * auto-probe anymore, now that we got the correct command.
 | |
| 		 */
 | |
| 		state->qam_demod_parameter_count = qam_demod_param_count;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * STEP 3: enable the system in a mode where the ADC provides valid
 | |
| 	 * signal setup modulation independent registers
 | |
| 	 */
 | |
| #if 0
 | |
| 	status = set_frequency(channel, tuner_freq_offset));
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| #endif
 | |
| 	status = set_frequency_shifter(state, intermediate_freqk_hz,
 | |
| 				       tuner_freq_offset, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Setup BER measurement */
 | |
| 	status = set_qam_measurement(state, state->m_constellation,
 | |
| 				     state->props.symbol_rate);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Reset default values */
 | |
| 	status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Reset default LC values */
 | |
| 	status = write16(state, QAM_LC_RATE_LIMIT__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_LPF_FACTORP__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_LPF_FACTORI__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_MODE__A, 7);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB0__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB1__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB2__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB3__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB4__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB5__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB6__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB8__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB9__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB10__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB12__A, 2);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB15__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB16__A, 3);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB20__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_LC_QUAL_TAB25__A, 4);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Mirroring, QAM-block starting point not inverted */
 | |
| 	status = write16(state, QAM_SY_SP_INV__A,
 | |
| 			 QAM_SY_SP_INV_SPECTRUM_INV_DIS);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Halt SCU to enable safe non-atomic accesses */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* STEP 4: modulation specific setup */
 | |
| 	switch (state->props.modulation) {
 | |
| 	case QAM_16:
 | |
| 		status = set_qam16(state);
 | |
| 		break;
 | |
| 	case QAM_32:
 | |
| 		status = set_qam32(state);
 | |
| 		break;
 | |
| 	case QAM_AUTO:
 | |
| 	case QAM_64:
 | |
| 		status = set_qam64(state);
 | |
| 		break;
 | |
| 	case QAM_128:
 | |
| 		status = set_qam128(state);
 | |
| 		break;
 | |
| 	case QAM_256:
 | |
| 		status = set_qam256(state);
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 		break;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Activate SCU to enable SCU commands */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Re-configure MPEG output, requires knowledge of channel bitrate */
 | |
| 	/* extAttr->currentChannel.modulation = channel->modulation; */
 | |
| 	/* extAttr->currentChannel.symbolrate    = channel->symbolrate; */
 | |
| 	status = mpegts_dto_setup(state, state->m_operation_mode);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* start processes */
 | |
| 	status = mpegts_start(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */
 | |
| 	status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM
 | |
| 			     | SCU_RAM_COMMAND_CMD_DEMOD_START,
 | |
| 			     0, NULL, 1, &cmd_result);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* update global DRXK data container */
 | |
| /*?     extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */
 | |
| 
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int set_qam_standard(struct drxk_state *state,
 | |
| 			  enum operation_mode o_mode)
 | |
| {
 | |
| 	int status;
 | |
| #ifdef DRXK_QAM_TAPS
 | |
| #define DRXK_QAMA_TAPS_SELECT
 | |
| #include "drxk_filters.h"
 | |
| #undef DRXK_QAMA_TAPS_SELECT
 | |
| #endif
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	/* added antenna switch */
 | |
| 	switch_antenna_to_qam(state);
 | |
| 
 | |
| 	/* Ensure correct power-up mode */
 | |
| 	status = power_up_qam(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	/* Reset QAM block */
 | |
| 	status = qam_reset_qam(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Setup IQM */
 | |
| 
 | |
| 	status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Upload IQM Channel Filter settings by
 | |
| 		boot loader from ROM table */
 | |
| 	switch (o_mode) {
 | |
| 	case OM_QAM_ITU_A:
 | |
| 		status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A,
 | |
| 				      DRXK_BLCC_NR_ELEMENTS_TAPS,
 | |
| 			DRXK_BLC_TIMEOUT);
 | |
| 		break;
 | |
| 	case OM_QAM_ITU_C:
 | |
| 		status = bl_direct_cmd(state, IQM_CF_TAP_RE0__A,
 | |
| 				       DRXK_BL_ROM_OFFSET_TAPS_ITU_C,
 | |
| 				       DRXK_BLDC_NR_ELEMENTS_TAPS,
 | |
| 				       DRXK_BLC_TIMEOUT);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = bl_direct_cmd(state,
 | |
| 				       IQM_CF_TAP_IM0__A,
 | |
| 				       DRXK_BL_ROM_OFFSET_TAPS_ITU_C,
 | |
| 				       DRXK_BLDC_NR_ELEMENTS_TAPS,
 | |
| 				       DRXK_BLC_TIMEOUT);
 | |
| 		break;
 | |
| 	default:
 | |
| 		status = -EINVAL;
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_CF_OUT_ENA__A, 1 << IQM_CF_OUT_ENA_QAM__B);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_SYMMETRIC__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_MIDTAP__A,
 | |
| 		     ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B)));
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_RC_STRETCH__A, 21);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_CLP_LEN__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_CLP_TH__A, 448);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_SNS_LEN__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, IQM_FS_ADJ_SEL__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_RC_ADJ_SEL__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_ADJ_SEL__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_UPD_SEL__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* IQM Impulse Noise Processing Unit */
 | |
| 	status = write16(state, IQM_CF_CLP_VAL__A, 500);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_DATATH__A, 1000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_BYPASSDET__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_DET_LCT__A, 0);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_WND_LEN__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_CF_PKDTH__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_INC_BYPASS__A, 1);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* turn on IQMAF. Must be done before setAgc**() */
 | |
| 	status = set_iqm_af(state, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, IQM_AF_START_LOCK__A, 0x01);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* IQM will not be reset from here, sync ADC and update/init AGC */
 | |
| 	status = adc_synchronization(state);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Set the FSM step period */
 | |
| 	status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Halt SCU to enable safe non-atomic accesses */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* No more resets of the IQM, current standard correctly set =>
 | |
| 		now AGCs can be configured. */
 | |
| 
 | |
| 	status = init_agc(state, true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = set_pre_saw(state, &(state->m_qam_pre_saw_cfg));
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Configure AGC's */
 | |
| 	status = set_agc_rf(state, &(state->m_qam_rf_agc_cfg), true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = set_agc_if(state, &(state->m_qam_if_agc_cfg), true);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/* Activate SCU to enable SCU commands */
 | |
| 	status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int write_gpio(struct drxk_state *state)
 | |
| {
 | |
| 	int status;
 | |
| 	u16 value = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	/* stop lock indicator process */
 | |
| 	status = write16(state, SCU_RAM_GPIO__A,
 | |
| 			 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	/*  Write magic word to enable pdr reg write               */
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	if (state->m_has_sawsw) {
 | |
| 		if (state->uio_mask & 0x0001) { /* UIO-1 */
 | |
| 			/* write to io pad configuration register - output mode */
 | |
| 			status = write16(state, SIO_PDR_SMA_TX_CFG__A,
 | |
| 					 state->m_gpio_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 
 | |
| 			/* use corresponding bit in io data output registar */
 | |
| 			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			if ((state->m_gpio & 0x0001) == 0)
 | |
| 				value &= 0x7FFF;	/* write zero to 15th bit - 1st UIO */
 | |
| 			else
 | |
| 				value |= 0x8000;	/* write one to 15th bit - 1st UIO */
 | |
| 			/* write back to io data output register */
 | |
| 			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 		if (state->uio_mask & 0x0002) { /* UIO-2 */
 | |
| 			/* write to io pad configuration register - output mode */
 | |
| 			status = write16(state, SIO_PDR_SMA_RX_CFG__A,
 | |
| 					 state->m_gpio_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 
 | |
| 			/* use corresponding bit in io data output registar */
 | |
| 			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			if ((state->m_gpio & 0x0002) == 0)
 | |
| 				value &= 0xBFFF;	/* write zero to 14th bit - 2st UIO */
 | |
| 			else
 | |
| 				value |= 0x4000;	/* write one to 14th bit - 2st UIO */
 | |
| 			/* write back to io data output register */
 | |
| 			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 		if (state->uio_mask & 0x0004) { /* UIO-3 */
 | |
| 			/* write to io pad configuration register - output mode */
 | |
| 			status = write16(state, SIO_PDR_GPIO_CFG__A,
 | |
| 					 state->m_gpio_cfg);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 
 | |
| 			/* use corresponding bit in io data output registar */
 | |
| 			status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			if ((state->m_gpio & 0x0004) == 0)
 | |
| 				value &= 0xFFFB;            /* write zero to 2nd bit - 3rd UIO */
 | |
| 			else
 | |
| 				value |= 0x0004;            /* write one to 2nd bit - 3rd UIO */
 | |
| 			/* write back to io data output register */
 | |
| 			status = write16(state, SIO_PDR_UIO_OUT_LO__A, value);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 	}
 | |
| 	/*  Write magic word to disable pdr reg write               */
 | |
| 	status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int switch_antenna_to_qam(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	bool gpio_state;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (!state->antenna_gpio)
 | |
| 		return 0;
 | |
| 
 | |
| 	gpio_state = state->m_gpio & state->antenna_gpio;
 | |
| 
 | |
| 	if (state->antenna_dvbt ^ gpio_state) {
 | |
| 		/* Antenna is on DVB-T mode. Switch */
 | |
| 		if (state->antenna_dvbt)
 | |
| 			state->m_gpio &= ~state->antenna_gpio;
 | |
| 		else
 | |
| 			state->m_gpio |= state->antenna_gpio;
 | |
| 		status = write_gpio(state);
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int switch_antenna_to_dvbt(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0;
 | |
| 	bool gpio_state;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (!state->antenna_gpio)
 | |
| 		return 0;
 | |
| 
 | |
| 	gpio_state = state->m_gpio & state->antenna_gpio;
 | |
| 
 | |
| 	if (!(state->antenna_dvbt ^ gpio_state)) {
 | |
| 		/* Antenna is on DVB-C mode. Switch */
 | |
| 		if (state->antenna_dvbt)
 | |
| 			state->m_gpio |= state->antenna_gpio;
 | |
| 		else
 | |
| 			state->m_gpio &= ~state->antenna_gpio;
 | |
| 		status = write_gpio(state);
 | |
| 	}
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int power_down_device(struct drxk_state *state)
 | |
| {
 | |
| 	/* Power down to requested mode */
 | |
| 	/* Backup some register settings */
 | |
| 	/* Set pins with possible pull-ups connected to them in input mode */
 | |
| 	/* Analog power down */
 | |
| 	/* ADC power down */
 | |
| 	/* Power down device */
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (state->m_b_p_down_open_bridge) {
 | |
| 		/* Open I2C bridge before power down of DRXK */
 | |
| 		status = ConfigureI2CBridge(state, true);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 	}
 | |
| 	/* driver 0.9.0 */
 | |
| 	status = dvbt_enable_ofdm_token_ring(state, false);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	status = write16(state, SIO_CC_PWD_MODE__A,
 | |
| 			 SIO_CC_PWD_MODE_LEVEL_CLOCK);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	state->m_hi_cfg_ctrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ;
 | |
| 	status = hi_cfg_command(state);
 | |
| error:
 | |
| 	if (status < 0)
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static int init_drxk(struct drxk_state *state)
 | |
| {
 | |
| 	int status = 0, n = 0;
 | |
| 	enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM;
 | |
| 	u16 driver_version;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED) {
 | |
| 		drxk_i2c_lock(state);
 | |
| 		status = power_up_device(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = drxx_open(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* Soft reset of OFDM-, sys- and osc-clockdomain */
 | |
| 		status = write16(state, SIO_CC_SOFT_RST__A,
 | |
| 				 SIO_CC_SOFT_RST_OFDM__M
 | |
| 				 | SIO_CC_SOFT_RST_SYS__M
 | |
| 				 | SIO_CC_SOFT_RST_OSC__M);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/*
 | |
| 		 * TODO is this needed? If yes, how much delay in
 | |
| 		 * worst case scenario
 | |
| 		 */
 | |
| 		usleep_range(1000, 2000);
 | |
| 		state->m_drxk_a3_patch_code = true;
 | |
| 		status = get_device_capabilities(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Bridge delay, uses oscilator clock */
 | |
| 		/* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */
 | |
| 		/* SDA brdige delay */
 | |
| 		state->m_hi_cfg_bridge_delay =
 | |
| 			(u16) ((state->m_osc_clock_freq / 1000) *
 | |
| 				HI_I2C_BRIDGE_DELAY) / 1000;
 | |
| 		/* Clipping */
 | |
| 		if (state->m_hi_cfg_bridge_delay >
 | |
| 			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) {
 | |
| 			state->m_hi_cfg_bridge_delay =
 | |
| 				SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M;
 | |
| 		}
 | |
| 		/* SCL bridge delay, same as SDA for now */
 | |
| 		state->m_hi_cfg_bridge_delay +=
 | |
| 			state->m_hi_cfg_bridge_delay <<
 | |
| 			SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B;
 | |
| 
 | |
| 		status = init_hi(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* disable various processes */
 | |
| #if NOA1ROM
 | |
| 		if (!(state->m_DRXK_A1_ROM_CODE)
 | |
| 			&& !(state->m_DRXK_A2_ROM_CODE))
 | |
| #endif
 | |
| 		{
 | |
| 			status = write16(state, SCU_RAM_GPIO__A,
 | |
| 					 SCU_RAM_GPIO_HW_LOCK_IND_DISABLE);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* disable MPEG port */
 | |
| 		status = mpegts_disable(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Stop AUD and SCU */
 | |
| 		status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* enable token-ring bus through OFDM block for possible ucode upload */
 | |
| 		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A,
 | |
| 				 SIO_OFDM_SH_OFDM_RING_ENABLE_ON);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* include boot loader section */
 | |
| 		status = write16(state, SIO_BL_COMM_EXEC__A,
 | |
| 				 SIO_BL_COMM_EXEC_ACTIVE);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = bl_chain_cmd(state, 0, 6, 100);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		if (state->fw) {
 | |
| 			status = download_microcode(state, state->fw->data,
 | |
| 						   state->fw->size);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* disable token-ring bus through OFDM block for possible ucode upload */
 | |
| 		status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A,
 | |
| 				 SIO_OFDM_SH_OFDM_RING_ENABLE_OFF);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Run SCU for a little while to initialize microcode version numbers */
 | |
| 		status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = drxx_open(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* added for test */
 | |
| 		msleep(30);
 | |
| 
 | |
| 		power_mode = DRXK_POWER_DOWN_OFDM;
 | |
| 		status = ctrl_power_mode(state, &power_mode);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		/* Stamp driver version number in SCU data RAM in BCD code
 | |
| 			Done to enable field application engineers to retrieve drxdriver version
 | |
| 			via I2C from SCU RAM.
 | |
| 			Not using SCU command interface for SCU register access since no
 | |
| 			microcode may be present.
 | |
| 			*/
 | |
| 		driver_version =
 | |
| 			(((DRXK_VERSION_MAJOR / 100) % 10) << 12) +
 | |
| 			(((DRXK_VERSION_MAJOR / 10) % 10) << 8) +
 | |
| 			((DRXK_VERSION_MAJOR % 10) << 4) +
 | |
| 			(DRXK_VERSION_MINOR % 10);
 | |
| 		status = write16(state, SCU_RAM_DRIVER_VER_HI__A,
 | |
| 				 driver_version);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		driver_version =
 | |
| 			(((DRXK_VERSION_PATCH / 1000) % 10) << 12) +
 | |
| 			(((DRXK_VERSION_PATCH / 100) % 10) << 8) +
 | |
| 			(((DRXK_VERSION_PATCH / 10) % 10) << 4) +
 | |
| 			(DRXK_VERSION_PATCH % 10);
 | |
| 		status = write16(state, SCU_RAM_DRIVER_VER_LO__A,
 | |
| 				 driver_version);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		pr_info("DRXK driver version %d.%d.%d\n",
 | |
| 			DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR,
 | |
| 			DRXK_VERSION_PATCH);
 | |
| 
 | |
| 		/*
 | |
| 		 * Dirty fix of default values for ROM/PATCH microcode
 | |
| 		 * Dirty because this fix makes it impossible to setup
 | |
| 		 * suitable values before calling DRX_Open. This solution
 | |
| 		 * requires changes to RF AGC speed to be done via the CTRL
 | |
| 		 * function after calling DRX_Open
 | |
| 		 */
 | |
| 
 | |
| 		/* m_dvbt_rf_agc_cfg.speed = 3; */
 | |
| 
 | |
| 		/* Reset driver debug flags to 0 */
 | |
| 		status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* driver 0.9.0 */
 | |
| 		/* Setup FEC OC:
 | |
| 			NOTE: No more full FEC resets allowed afterwards!! */
 | |
| 		status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* MPEGTS functions are still the same */
 | |
| 		status = mpegts_dto_init(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = mpegts_stop(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = mpegts_configure_polarity(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		status = mpegts_configure_pins(state, state->m_enable_mpeg_output);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 		/* added: configure GPIO */
 | |
| 		status = write_gpio(state);
 | |
| 		if (status < 0)
 | |
| 			goto error;
 | |
| 
 | |
| 		state->m_drxk_state = DRXK_STOPPED;
 | |
| 
 | |
| 		if (state->m_b_power_down) {
 | |
| 			status = power_down_device(state);
 | |
| 			if (status < 0)
 | |
| 				goto error;
 | |
| 			state->m_drxk_state = DRXK_POWERED_DOWN;
 | |
| 		} else
 | |
| 			state->m_drxk_state = DRXK_STOPPED;
 | |
| 
 | |
| 		/* Initialize the supported delivery systems */
 | |
| 		n = 0;
 | |
| 		if (state->m_has_dvbc) {
 | |
| 			state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A;
 | |
| 			state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C;
 | |
| 			strlcat(state->frontend.ops.info.name, " DVB-C",
 | |
| 				sizeof(state->frontend.ops.info.name));
 | |
| 		}
 | |
| 		if (state->m_has_dvbt) {
 | |
| 			state->frontend.ops.delsys[n++] = SYS_DVBT;
 | |
| 			strlcat(state->frontend.ops.info.name, " DVB-T",
 | |
| 				sizeof(state->frontend.ops.info.name));
 | |
| 		}
 | |
| 		drxk_i2c_unlock(state);
 | |
| 	}
 | |
| error:
 | |
| 	if (status < 0) {
 | |
| 		state->m_drxk_state = DRXK_NO_DEV;
 | |
| 		drxk_i2c_unlock(state);
 | |
| 		pr_err("Error %d on %s\n", status, __func__);
 | |
| 	}
 | |
| 
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| static void load_firmware_cb(const struct firmware *fw,
 | |
| 			     void *context)
 | |
| {
 | |
| 	struct drxk_state *state = context;
 | |
| 
 | |
| 	dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded");
 | |
| 	if (!fw) {
 | |
| 		pr_err("Could not load firmware file %s.\n",
 | |
| 			state->microcode_name);
 | |
| 		pr_info("Copy %s to your hotplug directory!\n",
 | |
| 			state->microcode_name);
 | |
| 		state->microcode_name = NULL;
 | |
| 
 | |
| 		/*
 | |
| 		 * As firmware is now load asynchronous, it is not possible
 | |
| 		 * anymore to fail at frontend attach. We might silently
 | |
| 		 * return here, and hope that the driver won't crash.
 | |
| 		 * We might also change all DVB callbacks to return -ENODEV
 | |
| 		 * if the device is not initialized.
 | |
| 		 * As the DRX-K devices have their own internal firmware,
 | |
| 		 * let's just hope that it will match a firmware revision
 | |
| 		 * compatible with this driver and proceed.
 | |
| 		 */
 | |
| 	}
 | |
| 	state->fw = fw;
 | |
| 
 | |
| 	init_drxk(state);
 | |
| }
 | |
| 
 | |
| static void drxk_release(struct dvb_frontend *fe)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	release_firmware(state->fw);
 | |
| 
 | |
| 	kfree(state);
 | |
| }
 | |
| 
 | |
| static int drxk_sleep(struct dvb_frontend *fe)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return 0;
 | |
| 
 | |
| 	shut_down(state);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 
 | |
| 	dprintk(1, ": %s\n", enable ? "enable" : "disable");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	return ConfigureI2CBridge(state, enable ? true : false);
 | |
| }
 | |
| 
 | |
| static int drxk_set_parameters(struct dvb_frontend *fe)
 | |
| {
 | |
| 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 | |
| 	u32 delsys  = p->delivery_system, old_delsys;
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	u32 IF;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	if (!fe->ops.tuner_ops.get_if_frequency) {
 | |
| 		pr_err("Error: get_if_frequency() not defined at tuner. Can't work without it!\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (fe->ops.i2c_gate_ctrl)
 | |
| 		fe->ops.i2c_gate_ctrl(fe, 1);
 | |
| 	if (fe->ops.tuner_ops.set_params)
 | |
| 		fe->ops.tuner_ops.set_params(fe);
 | |
| 	if (fe->ops.i2c_gate_ctrl)
 | |
| 		fe->ops.i2c_gate_ctrl(fe, 0);
 | |
| 
 | |
| 	old_delsys = state->props.delivery_system;
 | |
| 	state->props = *p;
 | |
| 
 | |
| 	if (old_delsys != delsys) {
 | |
| 		shut_down(state);
 | |
| 		switch (delsys) {
 | |
| 		case SYS_DVBC_ANNEX_A:
 | |
| 		case SYS_DVBC_ANNEX_C:
 | |
| 			if (!state->m_has_dvbc)
 | |
| 				return -EINVAL;
 | |
| 			state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ?
 | |
| 						true : false;
 | |
| 			if (state->m_itut_annex_c)
 | |
| 				setoperation_mode(state, OM_QAM_ITU_C);
 | |
| 			else
 | |
| 				setoperation_mode(state, OM_QAM_ITU_A);
 | |
| 			break;
 | |
| 		case SYS_DVBT:
 | |
| 			if (!state->m_has_dvbt)
 | |
| 				return -EINVAL;
 | |
| 			setoperation_mode(state, OM_DVBT);
 | |
| 			break;
 | |
| 		default:
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
 | |
| 	start(state, 0, IF);
 | |
| 
 | |
| 	/* After set_frontend, stats aren't available */
 | |
| 	p->strength.stat[0].scale = FE_SCALE_RELATIVE;
 | |
| 	p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 
 | |
| 	/* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int get_strength(struct drxk_state *state, u64 *strength)
 | |
| {
 | |
| 	int status;
 | |
| 	struct s_cfg_agc   rf_agc, if_agc;
 | |
| 	u32          total_gain  = 0;
 | |
| 	u32          atten      = 0;
 | |
| 	u32          agc_range   = 0;
 | |
| 	u16            scu_lvl  = 0;
 | |
| 	u16            scu_coc  = 0;
 | |
| 	/* FIXME: those are part of the tuner presets */
 | |
| 	u16 tuner_rf_gain         = 50; /* Default value on az6007 driver */
 | |
| 	u16 tuner_if_gain         = 40; /* Default value on az6007 driver */
 | |
| 
 | |
| 	*strength = 0;
 | |
| 
 | |
| 	if (is_dvbt(state)) {
 | |
| 		rf_agc = state->m_dvbt_rf_agc_cfg;
 | |
| 		if_agc = state->m_dvbt_if_agc_cfg;
 | |
| 	} else if (is_qam(state)) {
 | |
| 		rf_agc = state->m_qam_rf_agc_cfg;
 | |
| 		if_agc = state->m_qam_if_agc_cfg;
 | |
| 	} else {
 | |
| 		rf_agc = state->m_atv_rf_agc_cfg;
 | |
| 		if_agc = state->m_atv_if_agc_cfg;
 | |
| 	}
 | |
| 
 | |
| 	if (rf_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) {
 | |
| 		/* SCU output_level */
 | |
| 		status = read16(state, SCU_RAM_AGC_RF_IACCU_HI__A, &scu_lvl);
 | |
| 		if (status < 0)
 | |
| 			return status;
 | |
| 
 | |
| 		/* SCU c.o.c. */
 | |
| 		status = read16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, &scu_coc);
 | |
| 		if (status < 0)
 | |
| 			return status;
 | |
| 
 | |
| 		if (((u32) scu_lvl + (u32) scu_coc) < 0xffff)
 | |
| 			rf_agc.output_level = scu_lvl + scu_coc;
 | |
| 		else
 | |
| 			rf_agc.output_level = 0xffff;
 | |
| 
 | |
| 		/* Take RF gain into account */
 | |
| 		total_gain += tuner_rf_gain;
 | |
| 
 | |
| 		/* clip output value */
 | |
| 		if (rf_agc.output_level < rf_agc.min_output_level)
 | |
| 			rf_agc.output_level = rf_agc.min_output_level;
 | |
| 		if (rf_agc.output_level > rf_agc.max_output_level)
 | |
| 			rf_agc.output_level = rf_agc.max_output_level;
 | |
| 
 | |
| 		agc_range = (u32) (rf_agc.max_output_level - rf_agc.min_output_level);
 | |
| 		if (agc_range > 0) {
 | |
| 			atten += 100UL *
 | |
| 				((u32)(tuner_rf_gain)) *
 | |
| 				((u32)(rf_agc.output_level - rf_agc.min_output_level))
 | |
| 				/ agc_range;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (if_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) {
 | |
| 		status = read16(state, SCU_RAM_AGC_IF_IACCU_HI__A,
 | |
| 				&if_agc.output_level);
 | |
| 		if (status < 0)
 | |
| 			return status;
 | |
| 
 | |
| 		status = read16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A,
 | |
| 				&if_agc.top);
 | |
| 		if (status < 0)
 | |
| 			return status;
 | |
| 
 | |
| 		/* Take IF gain into account */
 | |
| 		total_gain += (u32) tuner_if_gain;
 | |
| 
 | |
| 		/* clip output value */
 | |
| 		if (if_agc.output_level < if_agc.min_output_level)
 | |
| 			if_agc.output_level = if_agc.min_output_level;
 | |
| 		if (if_agc.output_level > if_agc.max_output_level)
 | |
| 			if_agc.output_level = if_agc.max_output_level;
 | |
| 
 | |
| 		agc_range  = (u32)(if_agc.max_output_level - if_agc.min_output_level);
 | |
| 		if (agc_range > 0) {
 | |
| 			atten += 100UL *
 | |
| 				((u32)(tuner_if_gain)) *
 | |
| 				((u32)(if_agc.output_level - if_agc.min_output_level))
 | |
| 				/ agc_range;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Convert to 0..65535 scale.
 | |
| 	 * If it can't be measured (AGC is disabled), just show 100%.
 | |
| 	 */
 | |
| 	if (total_gain > 0)
 | |
| 		*strength = (65535UL * atten / total_gain / 100);
 | |
| 	else
 | |
| 		*strength = 65535;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_get_stats(struct dvb_frontend *fe)
 | |
| {
 | |
| 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	int status;
 | |
| 	u32 stat;
 | |
| 	u16 reg16;
 | |
| 	u32 post_bit_count;
 | |
| 	u32 post_bit_err_count;
 | |
| 	u32 post_bit_error_scale;
 | |
| 	u32 pre_bit_err_count;
 | |
| 	u32 pre_bit_count;
 | |
| 	u32 pkt_count;
 | |
| 	u32 pkt_error_count;
 | |
| 	s32 cnr;
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	/* get status */
 | |
| 	state->fe_status = 0;
 | |
| 	get_lock_status(state, &stat);
 | |
| 	if (stat == MPEG_LOCK)
 | |
| 		state->fe_status |= 0x1f;
 | |
| 	if (stat == FEC_LOCK)
 | |
| 		state->fe_status |= 0x0f;
 | |
| 	if (stat == DEMOD_LOCK)
 | |
| 		state->fe_status |= 0x07;
 | |
| 
 | |
| 	/*
 | |
| 	 * Estimate signal strength from AGC
 | |
| 	 */
 | |
| 	get_strength(state, &c->strength.stat[0].uvalue);
 | |
| 	c->strength.stat[0].scale = FE_SCALE_RELATIVE;
 | |
| 
 | |
| 
 | |
| 	if (stat >= DEMOD_LOCK) {
 | |
| 		get_signal_to_noise(state, &cnr);
 | |
| 		c->cnr.stat[0].svalue = cnr * 100;
 | |
| 		c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
 | |
| 	} else {
 | |
| 		c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	}
 | |
| 
 | |
| 	if (stat < FEC_LOCK) {
 | |
| 		c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		c->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* Get post BER */
 | |
| 
 | |
| 	/* BER measurement is valid if at least FEC lock is achieved */
 | |
| 
 | |
| 	/*
 | |
| 	 * OFDM_EC_VD_REQ_SMB_CNT__A and/or OFDM_EC_VD_REQ_BIT_CNT can be
 | |
| 	 * written to set nr of symbols or bits over which to measure
 | |
| 	 * EC_VD_REG_ERR_BIT_CNT__A . See CtrlSetCfg().
 | |
| 	 */
 | |
| 
 | |
| 	/* Read registers for post/preViterbi BER calculation */
 | |
| 	status = read16(state, OFDM_EC_VD_ERR_BIT_CNT__A, ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	pre_bit_err_count = reg16;
 | |
| 
 | |
| 	status = read16(state, OFDM_EC_VD_IN_BIT_CNT__A , ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	pre_bit_count = reg16;
 | |
| 
 | |
| 	/* Number of bit-errors */
 | |
| 	status = read16(state, FEC_RS_NR_BIT_ERRORS__A, ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	post_bit_err_count = reg16;
 | |
| 
 | |
| 	status = read16(state, FEC_RS_MEASUREMENT_PRESCALE__A, ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	post_bit_error_scale = reg16;
 | |
| 
 | |
| 	status = read16(state, FEC_RS_MEASUREMENT_PERIOD__A, ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	pkt_count = reg16;
 | |
| 
 | |
| 	status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, ®16);
 | |
| 	if (status < 0)
 | |
| 		goto error;
 | |
| 	pkt_error_count = reg16;
 | |
| 	write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0);
 | |
| 
 | |
| 	post_bit_err_count *= post_bit_error_scale;
 | |
| 
 | |
| 	post_bit_count = pkt_count * 204 * 8;
 | |
| 
 | |
| 	/* Store the results */
 | |
| 	c->block_error.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->block_error.stat[0].uvalue += pkt_error_count;
 | |
| 	c->block_count.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->block_count.stat[0].uvalue += pkt_count;
 | |
| 
 | |
| 	c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->pre_bit_error.stat[0].uvalue += pre_bit_err_count;
 | |
| 	c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->pre_bit_count.stat[0].uvalue += pre_bit_count;
 | |
| 
 | |
| 	c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->post_bit_error.stat[0].uvalue += post_bit_err_count;
 | |
| 	c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
 | |
| 	c->post_bit_count.stat[0].uvalue += post_bit_count;
 | |
| 
 | |
| error:
 | |
| 	return status;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int drxk_read_status(struct dvb_frontend *fe, enum fe_status *status)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	int rc;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	rc = drxk_get_stats(fe);
 | |
| 	if (rc < 0)
 | |
| 		return rc;
 | |
| 
 | |
| 	*status = state->fe_status;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_read_signal_strength(struct dvb_frontend *fe,
 | |
| 				     u16 *strength)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	*strength = c->strength.stat[0].uvalue;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	s32 snr2;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	get_signal_to_noise(state, &snr2);
 | |
| 
 | |
| 	/* No negative SNR, clip to zero */
 | |
| 	if (snr2 < 0)
 | |
| 		snr2 = 0;
 | |
| 	*snr = snr2 & 0xffff;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	u16 err = 0;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	dvbtqam_get_acc_pkt_err(state, &err);
 | |
| 	*ucblocks = (u32) err;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int drxk_get_tune_settings(struct dvb_frontend *fe,
 | |
| 				  struct dvb_frontend_tune_settings *sets)
 | |
| {
 | |
| 	struct drxk_state *state = fe->demodulator_priv;
 | |
| 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 
 | |
| 	if (state->m_drxk_state == DRXK_NO_DEV)
 | |
| 		return -ENODEV;
 | |
| 	if (state->m_drxk_state == DRXK_UNINITIALIZED)
 | |
| 		return -EAGAIN;
 | |
| 
 | |
| 	switch (p->delivery_system) {
 | |
| 	case SYS_DVBC_ANNEX_A:
 | |
| 	case SYS_DVBC_ANNEX_C:
 | |
| 	case SYS_DVBT:
 | |
| 		sets->min_delay_ms = 3000;
 | |
| 		sets->max_drift = 0;
 | |
| 		sets->step_size = 0;
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct dvb_frontend_ops drxk_ops = {
 | |
| 	/* .delsys will be filled dynamically */
 | |
| 	.info = {
 | |
| 		.name = "DRXK",
 | |
| 		.frequency_min_hz =  47 * MHz,
 | |
| 		.frequency_max_hz = 865 * MHz,
 | |
| 		 /* For DVB-C */
 | |
| 		.symbol_rate_min =   870000,
 | |
| 		.symbol_rate_max = 11700000,
 | |
| 		/* For DVB-T */
 | |
| 		.frequency_stepsize_hz = 166667,
 | |
| 
 | |
| 		.caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
 | |
| 			FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO |
 | |
| 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 | |
| 			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS |
 | |
| 			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
 | |
| 			FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO
 | |
| 	},
 | |
| 
 | |
| 	.release = drxk_release,
 | |
| 	.sleep = drxk_sleep,
 | |
| 	.i2c_gate_ctrl = drxk_gate_ctrl,
 | |
| 
 | |
| 	.set_frontend = drxk_set_parameters,
 | |
| 	.get_tune_settings = drxk_get_tune_settings,
 | |
| 
 | |
| 	.read_status = drxk_read_status,
 | |
| 	.read_signal_strength = drxk_read_signal_strength,
 | |
| 	.read_snr = drxk_read_snr,
 | |
| 	.read_ucblocks = drxk_read_ucblocks,
 | |
| };
 | |
| 
 | |
| struct dvb_frontend *drxk_attach(const struct drxk_config *config,
 | |
| 				 struct i2c_adapter *i2c)
 | |
| {
 | |
| 	struct dtv_frontend_properties *p;
 | |
| 	struct drxk_state *state = NULL;
 | |
| 	u8 adr = config->adr;
 | |
| 	int status;
 | |
| 
 | |
| 	dprintk(1, "\n");
 | |
| 	state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL);
 | |
| 	if (!state)
 | |
| 		return NULL;
 | |
| 
 | |
| 	state->i2c = i2c;
 | |
| 	state->demod_address = adr;
 | |
| 	state->single_master = config->single_master;
 | |
| 	state->microcode_name = config->microcode_name;
 | |
| 	state->qam_demod_parameter_count = config->qam_demod_parameter_count;
 | |
| 	state->no_i2c_bridge = config->no_i2c_bridge;
 | |
| 	state->antenna_gpio = config->antenna_gpio;
 | |
| 	state->antenna_dvbt = config->antenna_dvbt;
 | |
| 	state->m_chunk_size = config->chunk_size;
 | |
| 	state->enable_merr_cfg = config->enable_merr_cfg;
 | |
| 
 | |
| 	if (config->dynamic_clk) {
 | |
| 		state->m_dvbt_static_clk = false;
 | |
| 		state->m_dvbc_static_clk = false;
 | |
| 	} else {
 | |
| 		state->m_dvbt_static_clk = true;
 | |
| 		state->m_dvbc_static_clk = true;
 | |
| 	}
 | |
| 
 | |
| 
 | |
| 	if (config->mpeg_out_clk_strength)
 | |
| 		state->m_ts_clockk_strength = config->mpeg_out_clk_strength & 0x07;
 | |
| 	else
 | |
| 		state->m_ts_clockk_strength = 0x06;
 | |
| 
 | |
| 	if (config->parallel_ts)
 | |
| 		state->m_enable_parallel = true;
 | |
| 	else
 | |
| 		state->m_enable_parallel = false;
 | |
| 
 | |
| 	/* NOTE: as more UIO bits will be used, add them to the mask */
 | |
| 	state->uio_mask = config->antenna_gpio;
 | |
| 
 | |
| 	/* Default gpio to DVB-C */
 | |
| 	if (!state->antenna_dvbt && state->antenna_gpio)
 | |
| 		state->m_gpio |= state->antenna_gpio;
 | |
| 	else
 | |
| 		state->m_gpio &= ~state->antenna_gpio;
 | |
| 
 | |
| 	mutex_init(&state->mutex);
 | |
| 
 | |
| 	memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops));
 | |
| 	state->frontend.demodulator_priv = state;
 | |
| 
 | |
| 	init_state(state);
 | |
| 
 | |
| 	/* Load firmware and initialize DRX-K */
 | |
| 	if (state->microcode_name) {
 | |
| 		const struct firmware *fw = NULL;
 | |
| 
 | |
| 		status = request_firmware(&fw, state->microcode_name,
 | |
| 					  state->i2c->dev.parent);
 | |
| 		if (status < 0)
 | |
| 			fw = NULL;
 | |
| 		load_firmware_cb(fw, state);
 | |
| 	} else if (init_drxk(state) < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 
 | |
| 	/* Initialize stats */
 | |
| 	p = &state->frontend.dtv_property_cache;
 | |
| 	p->strength.len = 1;
 | |
| 	p->cnr.len = 1;
 | |
| 	p->block_error.len = 1;
 | |
| 	p->block_count.len = 1;
 | |
| 	p->pre_bit_error.len = 1;
 | |
| 	p->pre_bit_count.len = 1;
 | |
| 	p->post_bit_error.len = 1;
 | |
| 	p->post_bit_count.len = 1;
 | |
| 
 | |
| 	p->strength.stat[0].scale = FE_SCALE_RELATIVE;
 | |
| 	p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 	p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
 | |
| 
 | |
| 	pr_info("frontend initialized.\n");
 | |
| 	return &state->frontend;
 | |
| 
 | |
| error:
 | |
| 	pr_err("not found\n");
 | |
| 	kfree(state);
 | |
| 	return NULL;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(drxk_attach);
 | |
| 
 | |
| MODULE_DESCRIPTION("DRX-K driver");
 | |
| MODULE_AUTHOR("Ralph Metzler");
 | |
| MODULE_LICENSE("GPL");
 |