7826 lines
		
	
	
		
			210 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			7826 lines
		
	
	
		
			210 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
// SPDX-License-Identifier: GPL-2.0-only
 | 
						|
/*******************************************************************************
 | 
						|
  This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
 | 
						|
  ST Ethernet IPs are built around a Synopsys IP Core.
 | 
						|
 | 
						|
	Copyright(C) 2007-2011 STMicroelectronics Ltd
 | 
						|
 | 
						|
 | 
						|
  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 | 
						|
 | 
						|
  Documentation available at:
 | 
						|
	http://www.stlinux.com
 | 
						|
  Support available at:
 | 
						|
	https://bugzilla.stlinux.com/
 | 
						|
*******************************************************************************/
 | 
						|
 | 
						|
#include <linux/clk.h>
 | 
						|
#include <linux/kernel.h>
 | 
						|
#include <linux/interrupt.h>
 | 
						|
#include <linux/ip.h>
 | 
						|
#include <linux/tcp.h>
 | 
						|
#include <linux/skbuff.h>
 | 
						|
#include <linux/ethtool.h>
 | 
						|
#include <linux/if_ether.h>
 | 
						|
#include <linux/crc32.h>
 | 
						|
#include <linux/mii.h>
 | 
						|
#include <linux/if.h>
 | 
						|
#include <linux/if_vlan.h>
 | 
						|
#include <linux/dma-mapping.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/pm_runtime.h>
 | 
						|
#include <linux/prefetch.h>
 | 
						|
#include <linux/pinctrl/consumer.h>
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
#include <linux/debugfs.h>
 | 
						|
#include <linux/seq_file.h>
 | 
						|
#endif /* CONFIG_DEBUG_FS */
 | 
						|
#include <linux/net_tstamp.h>
 | 
						|
#include <linux/phylink.h>
 | 
						|
#include <linux/udp.h>
 | 
						|
#include <linux/bpf_trace.h>
 | 
						|
#include <net/pkt_cls.h>
 | 
						|
#include <net/xdp_sock_drv.h>
 | 
						|
#include "stmmac_ptp.h"
 | 
						|
#include "stmmac.h"
 | 
						|
#include "stmmac_xdp.h"
 | 
						|
#include <linux/reset.h>
 | 
						|
#include <linux/of_mdio.h>
 | 
						|
#include "dwmac1000.h"
 | 
						|
#include "dwxgmac2.h"
 | 
						|
#include "hwif.h"
 | 
						|
 | 
						|
/* As long as the interface is active, we keep the timestamping counter enabled
 | 
						|
 * with fine resolution and binary rollover. This avoid non-monotonic behavior
 | 
						|
 * (clock jumps) when changing timestamping settings at runtime.
 | 
						|
 */
 | 
						|
#define STMMAC_HWTS_ACTIVE	(PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | \
 | 
						|
				 PTP_TCR_TSCTRLSSR)
 | 
						|
 | 
						|
#define	STMMAC_ALIGN(x)		ALIGN(ALIGN(x, SMP_CACHE_BYTES), 16)
 | 
						|
#define	TSO_MAX_BUFF_SIZE	(SZ_16K - 1)
 | 
						|
 | 
						|
/* Module parameters */
 | 
						|
#define TX_TIMEO	5000
 | 
						|
static int watchdog = TX_TIMEO;
 | 
						|
module_param(watchdog, int, 0644);
 | 
						|
MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds (default 5s)");
 | 
						|
 | 
						|
static int debug = -1;
 | 
						|
module_param(debug, int, 0644);
 | 
						|
MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)");
 | 
						|
 | 
						|
static int phyaddr = -1;
 | 
						|
module_param(phyaddr, int, 0444);
 | 
						|
MODULE_PARM_DESC(phyaddr, "Physical device address");
 | 
						|
 | 
						|
#define STMMAC_TX_THRESH(x)	((x)->dma_conf.dma_tx_size / 4)
 | 
						|
#define STMMAC_RX_THRESH(x)	((x)->dma_conf.dma_rx_size / 4)
 | 
						|
 | 
						|
/* Limit to make sure XDP TX and slow path can coexist */
 | 
						|
#define STMMAC_XSK_TX_BUDGET_MAX	256
 | 
						|
#define STMMAC_TX_XSK_AVAIL		16
 | 
						|
#define STMMAC_RX_FILL_BATCH		16
 | 
						|
 | 
						|
#define STMMAC_XDP_PASS		0
 | 
						|
#define STMMAC_XDP_CONSUMED	BIT(0)
 | 
						|
#define STMMAC_XDP_TX		BIT(1)
 | 
						|
#define STMMAC_XDP_REDIRECT	BIT(2)
 | 
						|
 | 
						|
static int flow_ctrl = FLOW_AUTO;
 | 
						|
module_param(flow_ctrl, int, 0644);
 | 
						|
MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
 | 
						|
 | 
						|
static int pause = PAUSE_TIME;
 | 
						|
module_param(pause, int, 0644);
 | 
						|
MODULE_PARM_DESC(pause, "Flow Control Pause Time");
 | 
						|
 | 
						|
#define TC_DEFAULT 64
 | 
						|
static int tc = TC_DEFAULT;
 | 
						|
module_param(tc, int, 0644);
 | 
						|
MODULE_PARM_DESC(tc, "DMA threshold control value");
 | 
						|
 | 
						|
#define	DEFAULT_BUFSIZE	1536
 | 
						|
static int buf_sz = DEFAULT_BUFSIZE;
 | 
						|
module_param(buf_sz, int, 0644);
 | 
						|
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
 | 
						|
 | 
						|
#define	STMMAC_RX_COPYBREAK	256
 | 
						|
 | 
						|
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
 | 
						|
				      NETIF_MSG_LINK | NETIF_MSG_IFUP |
 | 
						|
				      NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
 | 
						|
 | 
						|
#define STMMAC_DEFAULT_LPI_TIMER	1000
 | 
						|
static int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
 | 
						|
module_param(eee_timer, int, 0644);
 | 
						|
MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
 | 
						|
#define STMMAC_LPI_T(x) (jiffies + usecs_to_jiffies(x))
 | 
						|
 | 
						|
/* By default the driver will use the ring mode to manage tx and rx descriptors,
 | 
						|
 * but allow user to force to use the chain instead of the ring
 | 
						|
 */
 | 
						|
static unsigned int chain_mode;
 | 
						|
module_param(chain_mode, int, 0444);
 | 
						|
MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
 | 
						|
 | 
						|
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
 | 
						|
/* For MSI interrupts handling */
 | 
						|
static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
 | 
						|
static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
 | 
						|
static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
 | 
						|
static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
 | 
						|
static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
 | 
						|
static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
 | 
						|
static void stmmac_reset_queues_param(struct stmmac_priv *priv);
 | 
						|
static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue);
 | 
						|
static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue);
 | 
						|
static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
 | 
						|
					  u32 rxmode, u32 chan);
 | 
						|
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
static const struct net_device_ops stmmac_netdev_ops;
 | 
						|
static void stmmac_init_fs(struct net_device *dev);
 | 
						|
static void stmmac_exit_fs(struct net_device *dev);
 | 
						|
#endif
 | 
						|
 | 
						|
#define STMMAC_COAL_TIMER(x) (ns_to_ktime((x) * NSEC_PER_USEC))
 | 
						|
 | 
						|
#define  LED_FIX  1
 | 
						|
#ifdef LED_FIX 
 | 
						|
#define RTL_8201F_PHY_ID  0x001cc816
 | 
						|
#define RTL_8211E_PHY_ID  0x001cc915
 | 
						|
#define RTL_8211F_PHY_ID  0x001cc916
 | 
						|
#define DP_83848_PHY_ID   0x20005c90
 | 
						|
#endif
 | 
						|
 | 
						|
int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled)
 | 
						|
{
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (enabled) {
 | 
						|
		ret = clk_prepare_enable(priv->plat->stmmac_clk);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
		ret = clk_prepare_enable(priv->plat->pclk);
 | 
						|
		if (ret) {
 | 
						|
			clk_disable_unprepare(priv->plat->stmmac_clk);
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
		if (priv->plat->clks_config) {
 | 
						|
			ret = priv->plat->clks_config(priv->plat->bsp_priv, enabled);
 | 
						|
			if (ret) {
 | 
						|
				clk_disable_unprepare(priv->plat->stmmac_clk);
 | 
						|
				clk_disable_unprepare(priv->plat->pclk);
 | 
						|
				return ret;
 | 
						|
			}
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		clk_disable_unprepare(priv->plat->stmmac_clk);
 | 
						|
		clk_disable_unprepare(priv->plat->pclk);
 | 
						|
		if (priv->plat->clks_config)
 | 
						|
			priv->plat->clks_config(priv->plat->bsp_priv, enabled);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_bus_clks_config);
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_verify_args - verify the driver parameters.
 | 
						|
 * Description: it checks the driver parameters and set a default in case of
 | 
						|
 * errors.
 | 
						|
 */
 | 
						|
static void stmmac_verify_args(void)
 | 
						|
{
 | 
						|
	if (unlikely(watchdog < 0))
 | 
						|
		watchdog = TX_TIMEO;
 | 
						|
	if (unlikely((buf_sz < DEFAULT_BUFSIZE) || (buf_sz > BUF_SIZE_16KiB)))
 | 
						|
		buf_sz = DEFAULT_BUFSIZE;
 | 
						|
	if (unlikely(flow_ctrl > 1))
 | 
						|
		flow_ctrl = FLOW_AUTO;
 | 
						|
	else if (likely(flow_ctrl < 0))
 | 
						|
		flow_ctrl = FLOW_OFF;
 | 
						|
	if (unlikely((pause < 0) || (pause > 0xffff)))
 | 
						|
		pause = PAUSE_TIME;
 | 
						|
	if (eee_timer < 0)
 | 
						|
		eee_timer = STMMAC_DEFAULT_LPI_TIMER;
 | 
						|
}
 | 
						|
 | 
						|
static void __stmmac_disable_all_queues(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	for (queue = 0; queue < maxq; queue++) {
 | 
						|
		struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
 | 
						|
		if (stmmac_xdp_is_enabled(priv) &&
 | 
						|
		    test_bit(queue, priv->af_xdp_zc_qps)) {
 | 
						|
			napi_disable(&ch->rxtx_napi);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		if (queue < rx_queues_cnt)
 | 
						|
			napi_disable(&ch->rx_napi);
 | 
						|
		if (queue < tx_queues_cnt)
 | 
						|
			napi_disable(&ch->tx_napi);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_disable_all_queues - Disable all queues
 | 
						|
 * @priv: driver private structure
 | 
						|
 */
 | 
						|
static void stmmac_disable_all_queues(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	struct stmmac_rx_queue *rx_q;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* synchronize_rcu() needed for pending XDP buffers to drain */
 | 
						|
	for (queue = 0; queue < rx_queues_cnt; queue++) {
 | 
						|
		rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
		if (rx_q->xsk_pool) {
 | 
						|
			synchronize_rcu();
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	__stmmac_disable_all_queues(priv);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_enable_all_queues - Enable all queues
 | 
						|
 * @priv: driver private structure
 | 
						|
 */
 | 
						|
static void stmmac_enable_all_queues(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_queues_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 maxq = max(rx_queues_cnt, tx_queues_cnt);
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	for (queue = 0; queue < maxq; queue++) {
 | 
						|
		struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
 | 
						|
		if (stmmac_xdp_is_enabled(priv) &&
 | 
						|
		    test_bit(queue, priv->af_xdp_zc_qps)) {
 | 
						|
			napi_enable(&ch->rxtx_napi);
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		if (queue < rx_queues_cnt)
 | 
						|
			napi_enable(&ch->rx_napi);
 | 
						|
		if (queue < tx_queues_cnt)
 | 
						|
			napi_enable(&ch->tx_napi);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_service_event_schedule(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	if (!test_bit(STMMAC_DOWN, &priv->state) &&
 | 
						|
	    !test_and_set_bit(STMMAC_SERVICE_SCHED, &priv->state))
 | 
						|
		queue_work(priv->wq, &priv->service_task);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_global_err(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	netif_carrier_off(priv->dev);
 | 
						|
	set_bit(STMMAC_RESET_REQUESTED, &priv->state);
 | 
						|
	stmmac_service_event_schedule(priv);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_clk_csr_set - dynamically set the MDC clock
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this is to dynamically set the MDC clock according to the csr
 | 
						|
 * clock input.
 | 
						|
 * Note:
 | 
						|
 *	If a specific clk_csr value is passed from the platform
 | 
						|
 *	this means that the CSR Clock Range selection cannot be
 | 
						|
 *	changed at run-time and it is fixed (as reported in the driver
 | 
						|
 *	documentation). Viceversa the driver will try to set the MDC
 | 
						|
 *	clock dynamically according to the actual clock input.
 | 
						|
 */
 | 
						|
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 clk_rate;
 | 
						|
 | 
						|
	clk_rate = clk_get_rate(priv->plat->pclk);
 | 
						|
 | 
						|
	/* Platform provided default clk_csr would be assumed valid
 | 
						|
	 * for all other cases except for the below mentioned ones.
 | 
						|
	 * For values higher than the IEEE 802.3 specified frequency
 | 
						|
	 * we can not estimate the proper divider as it is not known
 | 
						|
	 * the frequency of clk_csr_i. So we do not change the default
 | 
						|
	 * divider.
 | 
						|
	 */
 | 
						|
	if (!(priv->clk_csr & MAC_CSR_H_FRQ_MASK)) {
 | 
						|
		if (clk_rate < CSR_F_35M)
 | 
						|
			priv->clk_csr = STMMAC_CSR_20_35M;
 | 
						|
		else if ((clk_rate >= CSR_F_35M) && (clk_rate < CSR_F_60M))
 | 
						|
			priv->clk_csr = STMMAC_CSR_35_60M;
 | 
						|
		else if ((clk_rate >= CSR_F_60M) && (clk_rate < CSR_F_100M))
 | 
						|
			priv->clk_csr = STMMAC_CSR_60_100M;
 | 
						|
		else if ((clk_rate >= CSR_F_100M) && (clk_rate < CSR_F_150M))
 | 
						|
			priv->clk_csr = STMMAC_CSR_100_150M;
 | 
						|
		else if ((clk_rate >= CSR_F_150M) && (clk_rate < CSR_F_250M))
 | 
						|
			priv->clk_csr = STMMAC_CSR_150_250M;
 | 
						|
		else if ((clk_rate >= CSR_F_250M) && (clk_rate <= CSR_F_300M))
 | 
						|
			priv->clk_csr = STMMAC_CSR_250_300M;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->has_sun8i) {
 | 
						|
		if (clk_rate > 160000000)
 | 
						|
			priv->clk_csr = 0x03;
 | 
						|
		else if (clk_rate > 80000000)
 | 
						|
			priv->clk_csr = 0x02;
 | 
						|
		else if (clk_rate > 40000000)
 | 
						|
			priv->clk_csr = 0x01;
 | 
						|
		else
 | 
						|
			priv->clk_csr = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->has_xgmac) {
 | 
						|
		if (clk_rate > 400000000)
 | 
						|
			priv->clk_csr = 0x5;
 | 
						|
		else if (clk_rate > 350000000)
 | 
						|
			priv->clk_csr = 0x4;
 | 
						|
		else if (clk_rate > 300000000)
 | 
						|
			priv->clk_csr = 0x3;
 | 
						|
		else if (clk_rate > 250000000)
 | 
						|
			priv->clk_csr = 0x2;
 | 
						|
		else if (clk_rate > 150000000)
 | 
						|
			priv->clk_csr = 0x1;
 | 
						|
		else
 | 
						|
			priv->clk_csr = 0x0;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void print_pkt(unsigned char *buf, int len)
 | 
						|
{
 | 
						|
	pr_debug("len = %d byte, buf addr: 0x%p\n", len, buf);
 | 
						|
	print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
 | 
						|
}
 | 
						|
 | 
						|
static inline u32 stmmac_tx_avail(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	u32 avail;
 | 
						|
 | 
						|
	if (tx_q->dirty_tx > tx_q->cur_tx)
 | 
						|
		avail = tx_q->dirty_tx - tx_q->cur_tx - 1;
 | 
						|
	else
 | 
						|
		avail = priv->dma_conf.dma_tx_size - tx_q->cur_tx + tx_q->dirty_tx - 1;
 | 
						|
 | 
						|
	return avail;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_rx_dirty - Get RX queue dirty
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @queue: RX queue index
 | 
						|
 */
 | 
						|
static inline u32 stmmac_rx_dirty(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	u32 dirty;
 | 
						|
 | 
						|
	if (rx_q->dirty_rx <= rx_q->cur_rx)
 | 
						|
		dirty = rx_q->cur_rx - rx_q->dirty_rx;
 | 
						|
	else
 | 
						|
		dirty = priv->dma_conf.dma_rx_size - rx_q->dirty_rx + rx_q->cur_rx;
 | 
						|
 | 
						|
	return dirty;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_lpi_entry_timer_config(struct stmmac_priv *priv, bool en)
 | 
						|
{
 | 
						|
	int tx_lpi_timer;
 | 
						|
 | 
						|
	/* Clear/set the SW EEE timer flag based on LPI ET enablement */
 | 
						|
	priv->eee_sw_timer_en = en ? 0 : 1;
 | 
						|
	tx_lpi_timer  = en ? priv->tx_lpi_timer : 0;
 | 
						|
	stmmac_set_eee_lpi_timer(priv, priv->hw, tx_lpi_timer);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_enable_eee_mode - check and enter in LPI mode
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this function is to verify and enter in LPI mode in case of
 | 
						|
 * EEE.
 | 
						|
 */
 | 
						|
static int stmmac_enable_eee_mode(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* check if all TX queues have the work finished */
 | 
						|
	for (queue = 0; queue < tx_cnt; queue++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
 | 
						|
		if (tx_q->dirty_tx != tx_q->cur_tx)
 | 
						|
			return -EBUSY; /* still unfinished work */
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check and enter in LPI mode */
 | 
						|
	if (!priv->tx_path_in_lpi_mode)
 | 
						|
		stmmac_set_eee_mode(priv, priv->hw,
 | 
						|
				priv->plat->en_tx_lpi_clockgating);
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_disable_eee_mode - disable and exit from LPI mode
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this function is to exit and disable EEE in case of
 | 
						|
 * LPI state is true. This is called by the xmit.
 | 
						|
 */
 | 
						|
void stmmac_disable_eee_mode(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	if (!priv->eee_sw_timer_en) {
 | 
						|
		stmmac_lpi_entry_timer_config(priv, 0);
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_reset_eee_mode(priv, priv->hw);
 | 
						|
	del_timer_sync(&priv->eee_ctrl_timer);
 | 
						|
	priv->tx_path_in_lpi_mode = false;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_eee_ctrl_timer - EEE TX SW timer.
 | 
						|
 * @t:  timer_list struct containing private info
 | 
						|
 * Description:
 | 
						|
 *  if there is no data transfer and if we are not in LPI state,
 | 
						|
 *  then MAC Transmitter can be moved to LPI state.
 | 
						|
 */
 | 
						|
static void stmmac_eee_ctrl_timer(struct timer_list *t)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = from_timer(priv, t, eee_ctrl_timer);
 | 
						|
 | 
						|
	if (stmmac_enable_eee_mode(priv))
 | 
						|
		mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_eee_init - init EEE
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 *  if the GMAC supports the EEE (from the HW cap reg) and the phy device
 | 
						|
 *  can also manage EEE, this function enable the LPI state and start related
 | 
						|
 *  timer.
 | 
						|
 */
 | 
						|
bool stmmac_eee_init(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	int eee_tw_timer = priv->eee_tw_timer;
 | 
						|
 | 
						|
	/* Using PCS we cannot dial with the phy registers at this stage
 | 
						|
	 * so we do not support extra feature like EEE.
 | 
						|
	 */
 | 
						|
	if (priv->hw->pcs == STMMAC_PCS_TBI ||
 | 
						|
	    priv->hw->pcs == STMMAC_PCS_RTBI)
 | 
						|
		return false;
 | 
						|
 | 
						|
	/* Check if MAC core supports the EEE feature. */
 | 
						|
	if (!priv->dma_cap.eee)
 | 
						|
		return false;
 | 
						|
 | 
						|
	mutex_lock(&priv->lock);
 | 
						|
 | 
						|
	/* Check if it needs to be deactivated */
 | 
						|
	if (!priv->eee_active) {
 | 
						|
		if (priv->eee_enabled) {
 | 
						|
			netdev_dbg(priv->dev, "disable EEE\n");
 | 
						|
			stmmac_lpi_entry_timer_config(priv, 0);
 | 
						|
			del_timer_sync(&priv->eee_ctrl_timer);
 | 
						|
			stmmac_set_eee_timer(priv, priv->hw, 0, eee_tw_timer);
 | 
						|
			if (priv->hw->xpcs)
 | 
						|
				xpcs_config_eee(priv->hw->xpcs,
 | 
						|
						priv->plat->mult_fact_100ns,
 | 
						|
						false);
 | 
						|
		}
 | 
						|
		mutex_unlock(&priv->lock);
 | 
						|
		return false;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->eee_active && !priv->eee_enabled) {
 | 
						|
		timer_setup(&priv->eee_ctrl_timer, stmmac_eee_ctrl_timer, 0);
 | 
						|
		stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS,
 | 
						|
				     eee_tw_timer);
 | 
						|
		if (priv->hw->xpcs)
 | 
						|
			xpcs_config_eee(priv->hw->xpcs,
 | 
						|
					priv->plat->mult_fact_100ns,
 | 
						|
					true);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->has_gmac4 && priv->tx_lpi_timer <= STMMAC_ET_MAX) {
 | 
						|
		del_timer_sync(&priv->eee_ctrl_timer);
 | 
						|
		priv->tx_path_in_lpi_mode = false;
 | 
						|
		stmmac_lpi_entry_timer_config(priv, 1);
 | 
						|
	} else {
 | 
						|
		stmmac_lpi_entry_timer_config(priv, 0);
 | 
						|
		mod_timer(&priv->eee_ctrl_timer,
 | 
						|
			  STMMAC_LPI_T(priv->tx_lpi_timer));
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&priv->lock);
 | 
						|
	netdev_dbg(priv->dev, "Energy-Efficient Ethernet initialized\n");
 | 
						|
	return true;
 | 
						|
}
 | 
						|
 | 
						|
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @p : descriptor pointer
 | 
						|
 * @skb : the socket buffer
 | 
						|
 * Description :
 | 
						|
 * This function will read timestamp from the descriptor & pass it to stack.
 | 
						|
 * and also perform some sanity checks.
 | 
						|
 */
 | 
						|
static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv,
 | 
						|
				   struct dma_desc *p, struct sk_buff *skb)
 | 
						|
{
 | 
						|
	struct skb_shared_hwtstamps shhwtstamp;
 | 
						|
	bool found = false;
 | 
						|
	u64 ns = 0;
 | 
						|
 | 
						|
	if (!priv->hwts_tx_en)
 | 
						|
		return;
 | 
						|
 | 
						|
	/* exit if skb doesn't support hw tstamp */
 | 
						|
	if (likely(!skb || !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)))
 | 
						|
		return;
 | 
						|
 | 
						|
	/* check tx tstamp status */
 | 
						|
	if (stmmac_get_tx_timestamp_status(priv, p)) {
 | 
						|
		stmmac_get_timestamp(priv, p, priv->adv_ts, &ns);
 | 
						|
		found = true;
 | 
						|
	} else if (!stmmac_get_mac_tx_timestamp(priv, priv->hw, &ns)) {
 | 
						|
		found = true;
 | 
						|
	}
 | 
						|
 | 
						|
	if (found) {
 | 
						|
		ns -= priv->plat->cdc_error_adj;
 | 
						|
 | 
						|
		memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
 | 
						|
		shhwtstamp.hwtstamp = ns_to_ktime(ns);
 | 
						|
 | 
						|
		netdev_dbg(priv->dev, "get valid TX hw timestamp %llu\n", ns);
 | 
						|
		/* pass tstamp to stack */
 | 
						|
		skb_tstamp_tx(skb, &shhwtstamp);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/* stmmac_get_rx_hwtstamp - get HW RX timestamps
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @p : descriptor pointer
 | 
						|
 * @np : next descriptor pointer
 | 
						|
 * @skb : the socket buffer
 | 
						|
 * Description :
 | 
						|
 * This function will read received packet's timestamp from the descriptor
 | 
						|
 * and pass it to stack. It also perform some sanity checks.
 | 
						|
 */
 | 
						|
static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
 | 
						|
				   struct dma_desc *np, struct sk_buff *skb)
 | 
						|
{
 | 
						|
	struct skb_shared_hwtstamps *shhwtstamp = NULL;
 | 
						|
	struct dma_desc *desc = p;
 | 
						|
	u64 ns = 0;
 | 
						|
 | 
						|
	if (!priv->hwts_rx_en)
 | 
						|
		return;
 | 
						|
	/* For GMAC4, the valid timestamp is from CTX next desc. */
 | 
						|
	if (priv->plat->has_gmac4 || priv->plat->has_xgmac)
 | 
						|
		desc = np;
 | 
						|
 | 
						|
	/* Check if timestamp is available */
 | 
						|
	if (stmmac_get_rx_timestamp_status(priv, p, np, priv->adv_ts)) {
 | 
						|
		stmmac_get_timestamp(priv, desc, priv->adv_ts, &ns);
 | 
						|
 | 
						|
		ns -= priv->plat->cdc_error_adj;
 | 
						|
 | 
						|
		netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns);
 | 
						|
		shhwtstamp = skb_hwtstamps(skb);
 | 
						|
		memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
 | 
						|
		shhwtstamp->hwtstamp = ns_to_ktime(ns);
 | 
						|
	} else  {
 | 
						|
		netdev_dbg(priv->dev, "cannot get RX hw timestamp\n");
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_hwtstamp_set - control hardware timestamping.
 | 
						|
 *  @dev: device pointer.
 | 
						|
 *  @ifr: An IOCTL specific structure, that can contain a pointer to
 | 
						|
 *  a proprietary structure used to pass information to the driver.
 | 
						|
 *  Description:
 | 
						|
 *  This function configures the MAC to enable/disable both outgoing(TX)
 | 
						|
 *  and incoming(RX) packets time stamping based on user input.
 | 
						|
 *  Return Value:
 | 
						|
 *  0 on success and an appropriate -ve integer on failure.
 | 
						|
 */
 | 
						|
static int stmmac_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	struct hwtstamp_config config;
 | 
						|
	u32 ptp_v2 = 0;
 | 
						|
	u32 tstamp_all = 0;
 | 
						|
	u32 ptp_over_ipv4_udp = 0;
 | 
						|
	u32 ptp_over_ipv6_udp = 0;
 | 
						|
	u32 ptp_over_ethernet = 0;
 | 
						|
	u32 snap_type_sel = 0;
 | 
						|
	u32 ts_master_en = 0;
 | 
						|
	u32 ts_event_en = 0;
 | 
						|
 | 
						|
	if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
 | 
						|
		netdev_alert(priv->dev, "No support for HW time stamping\n");
 | 
						|
		priv->hwts_tx_en = 0;
 | 
						|
		priv->hwts_rx_en = 0;
 | 
						|
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
	}
 | 
						|
 | 
						|
	if (copy_from_user(&config, ifr->ifr_data,
 | 
						|
			   sizeof(config)))
 | 
						|
		return -EFAULT;
 | 
						|
 | 
						|
	netdev_dbg(priv->dev, "%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
 | 
						|
		   __func__, config.flags, config.tx_type, config.rx_filter);
 | 
						|
 | 
						|
	if (config.tx_type != HWTSTAMP_TX_OFF &&
 | 
						|
	    config.tx_type != HWTSTAMP_TX_ON)
 | 
						|
		return -ERANGE;
 | 
						|
 | 
						|
	if (priv->adv_ts) {
 | 
						|
		switch (config.rx_filter) {
 | 
						|
		case HWTSTAMP_FILTER_NONE:
 | 
						|
			/* time stamp no incoming packet at all */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_NONE;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
 | 
						|
			/* PTP v1, UDP, any kind of event packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
 | 
						|
			/* 'xmac' hardware can support Sync, Pdelay_Req and
 | 
						|
			 * Pdelay_resp by setting bit14 and bits17/16 to 01
 | 
						|
			 * This leaves Delay_Req timestamps out.
 | 
						|
			 * Enable all events *and* general purpose message
 | 
						|
			 * timestamping
 | 
						|
			 */
 | 
						|
			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
 | 
						|
			/* PTP v1, UDP, Sync packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_SYNC;
 | 
						|
			/* take time stamp for SYNC messages only */
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
 | 
						|
			/* PTP v1, UDP, Delay_req packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ;
 | 
						|
			/* take time stamp for Delay_Req messages only */
 | 
						|
			ts_master_en = PTP_TCR_TSMSTRENA;
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
 | 
						|
			/* PTP v2, UDP, any kind of event packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			/* take time stamp for all event messages */
 | 
						|
			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
 | 
						|
			/* PTP v2, UDP, Sync packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_SYNC;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			/* take time stamp for SYNC messages only */
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
 | 
						|
			/* PTP v2, UDP, Delay_req packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			/* take time stamp for Delay_Req messages only */
 | 
						|
			ts_master_en = PTP_TCR_TSMSTRENA;
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_EVENT:
 | 
						|
			/* PTP v2/802.AS1 any layer, any kind of event packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
 | 
						|
			if (priv->synopsys_id < DWMAC_CORE_4_10)
 | 
						|
				ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			ptp_over_ethernet = PTP_TCR_TSIPENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_SYNC:
 | 
						|
			/* PTP v2/802.AS1, any layer, Sync packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_SYNC;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			/* take time stamp for SYNC messages only */
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			ptp_over_ethernet = PTP_TCR_TSIPENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
 | 
						|
			/* PTP v2/802.AS1, any layer, Delay_req packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_DELAY_REQ;
 | 
						|
			ptp_v2 = PTP_TCR_TSVER2ENA;
 | 
						|
			/* take time stamp for Delay_Req messages only */
 | 
						|
			ts_master_en = PTP_TCR_TSMSTRENA;
 | 
						|
			ts_event_en = PTP_TCR_TSEVNTENA;
 | 
						|
 | 
						|
			ptp_over_ipv4_udp = PTP_TCR_TSIPV4ENA;
 | 
						|
			ptp_over_ipv6_udp = PTP_TCR_TSIPV6ENA;
 | 
						|
			ptp_over_ethernet = PTP_TCR_TSIPENA;
 | 
						|
			break;
 | 
						|
 | 
						|
		case HWTSTAMP_FILTER_NTP_ALL:
 | 
						|
		case HWTSTAMP_FILTER_ALL:
 | 
						|
			/* time stamp any incoming packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_ALL;
 | 
						|
			tstamp_all = PTP_TCR_TSENALL;
 | 
						|
			break;
 | 
						|
 | 
						|
		default:
 | 
						|
			return -ERANGE;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		switch (config.rx_filter) {
 | 
						|
		case HWTSTAMP_FILTER_NONE:
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_NONE;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			/* PTP v1, UDP, any kind of event packet */
 | 
						|
			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	priv->hwts_rx_en = ((config.rx_filter == HWTSTAMP_FILTER_NONE) ? 0 : 1);
 | 
						|
	priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON;
 | 
						|
 | 
						|
	priv->systime_flags = STMMAC_HWTS_ACTIVE;
 | 
						|
 | 
						|
	if (priv->hwts_tx_en || priv->hwts_rx_en) {
 | 
						|
		priv->systime_flags |= tstamp_all | ptp_v2 |
 | 
						|
				       ptp_over_ethernet | ptp_over_ipv6_udp |
 | 
						|
				       ptp_over_ipv4_udp | ts_event_en |
 | 
						|
				       ts_master_en | snap_type_sel;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_config_hw_tstamping(priv, priv->ptpaddr, priv->systime_flags);
 | 
						|
 | 
						|
	memcpy(&priv->tstamp_config, &config, sizeof(config));
 | 
						|
 | 
						|
	return copy_to_user(ifr->ifr_data, &config,
 | 
						|
			    sizeof(config)) ? -EFAULT : 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_hwtstamp_get - read hardware timestamping.
 | 
						|
 *  @dev: device pointer.
 | 
						|
 *  @ifr: An IOCTL specific structure, that can contain a pointer to
 | 
						|
 *  a proprietary structure used to pass information to the driver.
 | 
						|
 *  Description:
 | 
						|
 *  This function obtain the current hardware timestamping settings
 | 
						|
 *  as requested.
 | 
						|
 */
 | 
						|
static int stmmac_hwtstamp_get(struct net_device *dev, struct ifreq *ifr)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	struct hwtstamp_config *config = &priv->tstamp_config;
 | 
						|
 | 
						|
	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
 | 
						|
	return copy_to_user(ifr->ifr_data, config,
 | 
						|
			    sizeof(*config)) ? -EFAULT : 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_tstamp_counter - init hardware timestamping counter
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @systime_flags: timestamping flags
 | 
						|
 * Description:
 | 
						|
 * Initialize hardware counter for packet timestamping.
 | 
						|
 * This is valid as long as the interface is open and not suspended.
 | 
						|
 * Will be rerun after resuming from suspend, case in which the timestamping
 | 
						|
 * flags updated by stmmac_hwtstamp_set() also need to be restored.
 | 
						|
 */
 | 
						|
int stmmac_init_tstamp_counter(struct stmmac_priv *priv, u32 systime_flags)
 | 
						|
{
 | 
						|
	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 | 
						|
	struct timespec64 now;
 | 
						|
	u32 sec_inc = 0;
 | 
						|
	u64 temp = 0;
 | 
						|
 | 
						|
	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
 | 
						|
	stmmac_config_hw_tstamping(priv, priv->ptpaddr, systime_flags);
 | 
						|
	priv->systime_flags = systime_flags;
 | 
						|
 | 
						|
	/* program Sub Second Increment reg */
 | 
						|
	stmmac_config_sub_second_increment(priv, priv->ptpaddr,
 | 
						|
					   priv->plat->clk_ptp_rate,
 | 
						|
					   xmac, &sec_inc);
 | 
						|
	temp = div_u64(1000000000ULL, sec_inc);
 | 
						|
 | 
						|
	/* Store sub second increment for later use */
 | 
						|
	priv->sub_second_inc = sec_inc;
 | 
						|
 | 
						|
	/* calculate default added value:
 | 
						|
	 * formula is :
 | 
						|
	 * addend = (2^32)/freq_div_ratio;
 | 
						|
	 * where, freq_div_ratio = 1e9ns/sec_inc
 | 
						|
	 */
 | 
						|
	temp = (u64)(temp << 32);
 | 
						|
	priv->default_addend = div_u64(temp, priv->plat->clk_ptp_rate);
 | 
						|
	stmmac_config_addend(priv, priv->ptpaddr, priv->default_addend);
 | 
						|
 | 
						|
	/* initialize system time */
 | 
						|
	ktime_get_real_ts64(&now);
 | 
						|
 | 
						|
	/* lower 32 bits of tv_sec are safe until y2106 */
 | 
						|
	stmmac_init_systime(priv, priv->ptpaddr, (u32)now.tv_sec, now.tv_nsec);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_init_tstamp_counter);
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_ptp - init PTP
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this is to verify if the HW supports the PTPv1 or PTPv2.
 | 
						|
 * This is done by looking at the HW cap. register.
 | 
						|
 * This function also registers the ptp driver.
 | 
						|
 */
 | 
						|
static int stmmac_init_ptp(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (priv->plat->ptp_clk_freq_config)
 | 
						|
		priv->plat->ptp_clk_freq_config(priv);
 | 
						|
 | 
						|
	ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	priv->adv_ts = 0;
 | 
						|
	/* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
 | 
						|
	if (xmac && priv->dma_cap.atime_stamp)
 | 
						|
		priv->adv_ts = 1;
 | 
						|
	/* Dwmac 3.x core with extend_desc can support adv_ts */
 | 
						|
	else if (priv->extend_desc && priv->dma_cap.atime_stamp)
 | 
						|
		priv->adv_ts = 1;
 | 
						|
 | 
						|
	if (priv->dma_cap.time_stamp)
 | 
						|
		netdev_info(priv->dev, "IEEE 1588-2002 Timestamp supported\n");
 | 
						|
 | 
						|
	if (priv->adv_ts)
 | 
						|
		netdev_info(priv->dev,
 | 
						|
			    "IEEE 1588-2008 Advanced Timestamp supported\n");
 | 
						|
 | 
						|
	priv->hwts_tx_en = 0;
 | 
						|
	priv->hwts_rx_en = 0;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_release_ptp(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	clk_disable_unprepare(priv->plat->clk_ptp_ref);
 | 
						|
	stmmac_ptp_unregister(priv);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mac_flow_ctrl - Configure flow control in all queues
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  @duplex: duplex passed to the next function
 | 
						|
 *  Description: It is used for configuring the flow control in all queues
 | 
						|
 */
 | 
						|
static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex)
 | 
						|
{
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
 | 
						|
	stmmac_flow_ctrl(priv, priv->hw, duplex, priv->flow_ctrl & priv->plat->flow_ctrl,
 | 
						|
			 priv->pause, tx_cnt);
 | 
						|
}
 | 
						|
 | 
						|
static struct phylink_pcs *stmmac_mac_select_pcs(struct phylink_config *config,
 | 
						|
						 phy_interface_t interface)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 | 
						|
 | 
						|
	if (!priv->hw->xpcs)
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	return &priv->hw->xpcs->pcs;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 | 
						|
			      const struct phylink_link_state *state)
 | 
						|
{
 | 
						|
	/* Nothing to do, xpcs_config() handles everything */
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 | 
						|
{
 | 
						|
	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
 | 
						|
	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 | 
						|
	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 | 
						|
	bool *hs_enable = &fpe_cfg->hs_enable;
 | 
						|
 | 
						|
	if (is_up && *hs_enable) {
 | 
						|
		stmmac_fpe_send_mpacket(priv, priv->ioaddr, fpe_cfg,
 | 
						|
					MPACKET_VERIFY);
 | 
						|
	} else {
 | 
						|
		*lo_state = FPE_STATE_OFF;
 | 
						|
		*lp_state = FPE_STATE_OFF;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_mac_link_down(struct phylink_config *config,
 | 
						|
				 unsigned int mode, phy_interface_t interface)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 | 
						|
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, false);
 | 
						|
	priv->eee_active = false;
 | 
						|
	priv->tx_lpi_enabled = false;
 | 
						|
	priv->eee_enabled = stmmac_eee_init(priv);
 | 
						|
	stmmac_set_eee_pls(priv, priv->hw, false);
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel)
 | 
						|
		stmmac_fpe_link_state_handle(priv, false);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_mac_link_up(struct phylink_config *config,
 | 
						|
			       struct phy_device *phy,
 | 
						|
			       unsigned int mode, phy_interface_t interface,
 | 
						|
			       int speed, int duplex,
 | 
						|
			       bool tx_pause, bool rx_pause)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 | 
						|
	u32 old_ctrl, ctrl;
 | 
						|
 | 
						|
	old_ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
 | 
						|
	ctrl = old_ctrl & ~priv->hw->link.speed_mask;
 | 
						|
 | 
						|
	if (interface == PHY_INTERFACE_MODE_USXGMII) {
 | 
						|
		switch (speed) {
 | 
						|
		case SPEED_10000:
 | 
						|
			ctrl |= priv->hw->link.xgmii.speed10000;
 | 
						|
			break;
 | 
						|
		case SPEED_5000:
 | 
						|
			ctrl |= priv->hw->link.xgmii.speed5000;
 | 
						|
			break;
 | 
						|
		case SPEED_2500:
 | 
						|
			ctrl |= priv->hw->link.xgmii.speed2500;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	} else if (interface == PHY_INTERFACE_MODE_XLGMII) {
 | 
						|
		switch (speed) {
 | 
						|
		case SPEED_100000:
 | 
						|
			ctrl |= priv->hw->link.xlgmii.speed100000;
 | 
						|
			break;
 | 
						|
		case SPEED_50000:
 | 
						|
			ctrl |= priv->hw->link.xlgmii.speed50000;
 | 
						|
			break;
 | 
						|
		case SPEED_40000:
 | 
						|
			ctrl |= priv->hw->link.xlgmii.speed40000;
 | 
						|
			break;
 | 
						|
		case SPEED_25000:
 | 
						|
			ctrl |= priv->hw->link.xlgmii.speed25000;
 | 
						|
			break;
 | 
						|
		case SPEED_10000:
 | 
						|
			ctrl |= priv->hw->link.xgmii.speed10000;
 | 
						|
			break;
 | 
						|
		case SPEED_2500:
 | 
						|
			ctrl |= priv->hw->link.speed2500;
 | 
						|
			break;
 | 
						|
		case SPEED_1000:
 | 
						|
			ctrl |= priv->hw->link.speed1000;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	} else {
 | 
						|
		switch (speed) {
 | 
						|
		case SPEED_2500:
 | 
						|
			ctrl |= priv->hw->link.speed2500;
 | 
						|
			break;
 | 
						|
		case SPEED_1000:
 | 
						|
			ctrl |= priv->hw->link.speed1000;
 | 
						|
			break;
 | 
						|
		case SPEED_100:
 | 
						|
			ctrl |= priv->hw->link.speed100;
 | 
						|
			break;
 | 
						|
		case SPEED_10:
 | 
						|
			ctrl |= priv->hw->link.speed10;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			return;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	priv->speed = speed;
 | 
						|
 | 
						|
	if (priv->plat->fix_mac_speed)
 | 
						|
		priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed);
 | 
						|
 | 
						|
	if (!duplex)
 | 
						|
		ctrl &= ~priv->hw->link.duplex;
 | 
						|
	else
 | 
						|
		ctrl |= priv->hw->link.duplex;
 | 
						|
 | 
						|
	/* Flow Control operation */
 | 
						|
	if (rx_pause && tx_pause)
 | 
						|
		priv->flow_ctrl = FLOW_AUTO;
 | 
						|
	else if (rx_pause && !tx_pause)
 | 
						|
		priv->flow_ctrl = FLOW_RX;
 | 
						|
	else if (!rx_pause && tx_pause)
 | 
						|
		priv->flow_ctrl = FLOW_TX;
 | 
						|
	else
 | 
						|
		priv->flow_ctrl = FLOW_OFF;
 | 
						|
 | 
						|
	stmmac_mac_flow_ctrl(priv, duplex);
 | 
						|
 | 
						|
	if (ctrl != old_ctrl)
 | 
						|
		writel(ctrl, priv->ioaddr + MAC_CTRL_REG);
 | 
						|
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, true);
 | 
						|
	if (phy && priv->dma_cap.eee) {
 | 
						|
		priv->eee_active =
 | 
						|
			phy_init_eee(phy, !priv->plat->rx_clk_runs_in_lpi) >= 0;
 | 
						|
		priv->eee_enabled = stmmac_eee_init(priv);
 | 
						|
		priv->tx_lpi_enabled = priv->eee_enabled;
 | 
						|
		stmmac_set_eee_pls(priv, priv->hw, true);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel)
 | 
						|
		stmmac_fpe_link_state_handle(priv, true);
 | 
						|
}
 | 
						|
 | 
						|
static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 | 
						|
	.validate = phylink_generic_validate,
 | 
						|
	.mac_select_pcs = stmmac_mac_select_pcs,
 | 
						|
	.mac_config = stmmac_mac_config,
 | 
						|
	.mac_link_down = stmmac_mac_link_down,
 | 
						|
	.mac_link_up = stmmac_mac_link_up,
 | 
						|
};
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_check_pcs_mode - verify if RGMII/SGMII is supported
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this is to verify if the HW supports the PCS.
 | 
						|
 * Physical Coding Sublayer (PCS) interface that can be used when the MAC is
 | 
						|
 * configured for the TBI, RTBI, or SGMII PHY interface.
 | 
						|
 */
 | 
						|
static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	int interface = priv->plat->interface;
 | 
						|
 | 
						|
	if (priv->dma_cap.pcs) {
 | 
						|
		if ((interface == PHY_INTERFACE_MODE_RGMII) ||
 | 
						|
		    (interface == PHY_INTERFACE_MODE_RGMII_ID) ||
 | 
						|
		    (interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 | 
						|
		    (interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
 | 
						|
			netdev_dbg(priv->dev, "PCS RGMII support enabled\n");
 | 
						|
			priv->hw->pcs = STMMAC_PCS_RGMII;
 | 
						|
		} else if (interface == PHY_INTERFACE_MODE_SGMII) {
 | 
						|
			netdev_dbg(priv->dev, "PCS SGMII support enabled\n");
 | 
						|
			priv->hw->pcs = STMMAC_PCS_SGMII;
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_phy - PHY initialization
 | 
						|
 * @dev: net device structure
 | 
						|
 * Description: it initializes the driver's PHY state, and attaches the PHY
 | 
						|
 * to the mac driver.
 | 
						|
 *  Return value:
 | 
						|
 *  0 on success
 | 
						|
 */
 | 
						|
static int stmmac_init_phy(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	struct fwnode_handle *phy_fwnode;
 | 
						|
	struct fwnode_handle *fwnode;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!phylink_expects_phy(priv->phylink))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	if (priv->plat->integrated_phy_power)
 | 
						|
		ret = priv->plat->integrated_phy_power(priv->plat->bsp_priv, true);
 | 
						|
 | 
						|
	fwnode = of_fwnode_handle(priv->plat->phylink_node);
 | 
						|
	if (!fwnode)
 | 
						|
		fwnode = dev_fwnode(priv->device);
 | 
						|
 | 
						|
	if (fwnode)
 | 
						|
		phy_fwnode = fwnode_get_phy_node(fwnode);
 | 
						|
	else
 | 
						|
		phy_fwnode = NULL;
 | 
						|
 | 
						|
	/* Some DT bindings do not set-up the PHY handle. Let's try to
 | 
						|
	 * manually parse it
 | 
						|
	 */
 | 
						|
	if (!phy_fwnode || IS_ERR(phy_fwnode)) {
 | 
						|
		int addr = priv->plat->phy_addr;
 | 
						|
		struct phy_device *phydev;
 | 
						|
 | 
						|
		if (addr < 0) {
 | 
						|
			netdev_err(priv->dev, "no phy found\n");
 | 
						|
			return -ENODEV;
 | 
						|
		}
 | 
						|
 | 
						|
		phydev = mdiobus_get_phy(priv->mii, addr);
 | 
						|
		if (!phydev) {
 | 
						|
			netdev_err(priv->dev, "no phy at addr %d\n", addr);
 | 
						|
			return -ENODEV;
 | 
						|
		}
 | 
						|
 | 
						|
		ret = phylink_connect_phy(priv->phylink, phydev);
 | 
						|
	} else {
 | 
						|
		fwnode_handle_put(phy_fwnode);
 | 
						|
		ret = phylink_fwnode_phy_connect(priv->phylink, fwnode, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	if (!priv->plat->pmt) {
 | 
						|
		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
 | 
						|
 | 
						|
		phylink_ethtool_get_wol(priv->phylink, &wol);
 | 
						|
		device_set_wakeup_capable(priv->device, !!wol.supported);
 | 
						|
		device_set_wakeup_enable(priv->device, !!wol.wolopts);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_phy_setup(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
 | 
						|
	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
 | 
						|
	int max_speed = priv->plat->max_speed;
 | 
						|
	int mode = priv->plat->phy_interface;
 | 
						|
	struct phylink *phylink;
 | 
						|
 | 
						|
	priv->phylink_config.dev = &priv->dev->dev;
 | 
						|
	priv->phylink_config.type = PHYLINK_NETDEV;
 | 
						|
	if (priv->plat->mdio_bus_data)
 | 
						|
		priv->phylink_config.ovr_an_inband =
 | 
						|
			mdio_bus_data->xpcs_an_inband;
 | 
						|
 | 
						|
	if (!fwnode)
 | 
						|
		fwnode = dev_fwnode(priv->device);
 | 
						|
 | 
						|
	/* Set the platform/firmware specified interface mode */
 | 
						|
	__set_bit(mode, priv->phylink_config.supported_interfaces);
 | 
						|
 | 
						|
	/* If we have an xpcs, it defines which PHY interfaces are supported. */
 | 
						|
	if (priv->hw->xpcs)
 | 
						|
		xpcs_get_interfaces(priv->hw->xpcs,
 | 
						|
				    priv->phylink_config.supported_interfaces);
 | 
						|
 | 
						|
	priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
 | 
						|
		MAC_10 | MAC_100;
 | 
						|
 | 
						|
	if (!max_speed || max_speed >= 1000)
 | 
						|
		priv->phylink_config.mac_capabilities |= MAC_1000;
 | 
						|
 | 
						|
	if (priv->plat->has_gmac4) {
 | 
						|
		if (!max_speed || max_speed >= 2500)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_2500FD;
 | 
						|
	} else if (priv->plat->has_xgmac) {
 | 
						|
		if (!max_speed || max_speed >= 2500)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_2500FD;
 | 
						|
		if (!max_speed || max_speed >= 5000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_5000FD;
 | 
						|
		if (!max_speed || max_speed >= 10000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_10000FD;
 | 
						|
		if (!max_speed || max_speed >= 25000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_25000FD;
 | 
						|
		if (!max_speed || max_speed >= 40000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_40000FD;
 | 
						|
		if (!max_speed || max_speed >= 50000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_50000FD;
 | 
						|
		if (!max_speed || max_speed >= 100000)
 | 
						|
			priv->phylink_config.mac_capabilities |= MAC_100000FD;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Half-Duplex can only work with single queue */
 | 
						|
	if (priv->plat->tx_queues_to_use > 1)
 | 
						|
		priv->phylink_config.mac_capabilities &=
 | 
						|
			~(MAC_10HD | MAC_100HD | MAC_1000HD);
 | 
						|
	priv->phylink_config.mac_managed_pm = true;
 | 
						|
 | 
						|
	phylink = phylink_create(&priv->phylink_config, fwnode,
 | 
						|
				 mode, &stmmac_phylink_mac_ops);
 | 
						|
	if (IS_ERR(phylink))
 | 
						|
		return PTR_ERR(phylink);
 | 
						|
 | 
						|
	priv->phylink = phylink;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_display_rx_rings(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 rx_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	unsigned int desc_size;
 | 
						|
	void *head_rx;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* Display RX rings */
 | 
						|
	for (queue = 0; queue < rx_cnt; queue++) {
 | 
						|
		struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
 | 
						|
		pr_info("\tRX Queue %u rings\n", queue);
 | 
						|
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			head_rx = (void *)rx_q->dma_erx;
 | 
						|
			desc_size = sizeof(struct dma_extended_desc);
 | 
						|
		} else {
 | 
						|
			head_rx = (void *)rx_q->dma_rx;
 | 
						|
			desc_size = sizeof(struct dma_desc);
 | 
						|
		}
 | 
						|
 | 
						|
		/* Display RX ring */
 | 
						|
		stmmac_display_ring(priv, head_rx, dma_conf->dma_rx_size, true,
 | 
						|
				    rx_q->dma_rx_phy, desc_size);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_display_tx_rings(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	unsigned int desc_size;
 | 
						|
	void *head_tx;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* Display TX rings */
 | 
						|
	for (queue = 0; queue < tx_cnt; queue++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
 | 
						|
		pr_info("\tTX Queue %d rings\n", queue);
 | 
						|
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			head_tx = (void *)tx_q->dma_etx;
 | 
						|
			desc_size = sizeof(struct dma_extended_desc);
 | 
						|
		} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
 | 
						|
			head_tx = (void *)tx_q->dma_entx;
 | 
						|
			desc_size = sizeof(struct dma_edesc);
 | 
						|
		} else {
 | 
						|
			head_tx = (void *)tx_q->dma_tx;
 | 
						|
			desc_size = sizeof(struct dma_desc);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_display_ring(priv, head_tx, dma_conf->dma_tx_size, false,
 | 
						|
				    tx_q->dma_tx_phy, desc_size);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_display_rings(struct stmmac_priv *priv,
 | 
						|
				 struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	/* Display RX ring */
 | 
						|
	stmmac_display_rx_rings(priv, dma_conf);
 | 
						|
 | 
						|
	/* Display TX ring */
 | 
						|
	stmmac_display_tx_rings(priv, dma_conf);
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_set_bfsize(int mtu, int bufsize)
 | 
						|
{
 | 
						|
	int ret = bufsize;
 | 
						|
 | 
						|
	if (mtu >= BUF_SIZE_8KiB)
 | 
						|
		ret = BUF_SIZE_16KiB;
 | 
						|
	else if (mtu >= BUF_SIZE_4KiB)
 | 
						|
		ret = BUF_SIZE_8KiB;
 | 
						|
	else if (mtu >= BUF_SIZE_2KiB)
 | 
						|
		ret = BUF_SIZE_4KiB;
 | 
						|
	else if (mtu > DEFAULT_BUFSIZE)
 | 
						|
		ret = BUF_SIZE_2KiB;
 | 
						|
	else
 | 
						|
		ret = DEFAULT_BUFSIZE;
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_clear_rx_descriptors - clear RX descriptors
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 * Description: this function is called to clear the RX descriptors
 | 
						|
 * in case of both basic and extended descriptors are used.
 | 
						|
 */
 | 
						|
static void stmmac_clear_rx_descriptors(struct stmmac_priv *priv,
 | 
						|
					struct stmmac_dma_conf *dma_conf,
 | 
						|
					u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* Clear the RX descriptors */
 | 
						|
	for (i = 0; i < dma_conf->dma_rx_size; i++)
 | 
						|
		if (priv->extend_desc)
 | 
						|
			stmmac_init_rx_desc(priv, &rx_q->dma_erx[i].basic,
 | 
						|
					priv->use_riwt, priv->mode,
 | 
						|
					(i == dma_conf->dma_rx_size - 1),
 | 
						|
					dma_conf->dma_buf_sz);
 | 
						|
		else
 | 
						|
			stmmac_init_rx_desc(priv, &rx_q->dma_rx[i],
 | 
						|
					priv->use_riwt, priv->mode,
 | 
						|
					(i == dma_conf->dma_rx_size - 1),
 | 
						|
					dma_conf->dma_buf_sz);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_clear_tx_descriptors - clear tx descriptors
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: TX queue index.
 | 
						|
 * Description: this function is called to clear the TX descriptors
 | 
						|
 * in case of both basic and extended descriptors are used.
 | 
						|
 */
 | 
						|
static void stmmac_clear_tx_descriptors(struct stmmac_priv *priv,
 | 
						|
					struct stmmac_dma_conf *dma_conf,
 | 
						|
					u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* Clear the TX descriptors */
 | 
						|
	for (i = 0; i < dma_conf->dma_tx_size; i++) {
 | 
						|
		int last = (i == (dma_conf->dma_tx_size - 1));
 | 
						|
		struct dma_desc *p;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = &tx_q->dma_etx[i].basic;
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			p = &tx_q->dma_entx[i].basic;
 | 
						|
		else
 | 
						|
			p = &tx_q->dma_tx[i];
 | 
						|
 | 
						|
		stmmac_init_tx_desc(priv, p, priv->mode, last);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_clear_descriptors - clear descriptors
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * Description: this function is called to clear the TX and RX descriptors
 | 
						|
 * in case of both basic and extended descriptors are used.
 | 
						|
 */
 | 
						|
static void stmmac_clear_descriptors(struct stmmac_priv *priv,
 | 
						|
				     struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 rx_queue_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* Clear the RX descriptors */
 | 
						|
	for (queue = 0; queue < rx_queue_cnt; queue++)
 | 
						|
		stmmac_clear_rx_descriptors(priv, dma_conf, queue);
 | 
						|
 | 
						|
	/* Clear the TX descriptors */
 | 
						|
	for (queue = 0; queue < tx_queue_cnt; queue++)
 | 
						|
		stmmac_clear_tx_descriptors(priv, dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_rx_buffers - init the RX descriptor buffer.
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @p: descriptor pointer
 | 
						|
 * @i: descriptor index
 | 
						|
 * @flags: gfp flag
 | 
						|
 * @queue: RX queue index
 | 
						|
 * Description: this function is called to allocate a receive buffer, perform
 | 
						|
 * the DMA mapping and init the descriptor.
 | 
						|
 */
 | 
						|
static int stmmac_init_rx_buffers(struct stmmac_priv *priv,
 | 
						|
				  struct stmmac_dma_conf *dma_conf,
 | 
						|
				  struct dma_desc *p,
 | 
						|
				  int i, gfp_t flags, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
 | 
						|
	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
 | 
						|
 | 
						|
	if (priv->dma_cap.host_dma_width <= 32)
 | 
						|
		gfp |= GFP_DMA32;
 | 
						|
 | 
						|
	if (!buf->page) {
 | 
						|
		buf->page = page_pool_alloc_pages(rx_q->page_pool, gfp);
 | 
						|
		if (!buf->page)
 | 
						|
			return -ENOMEM;
 | 
						|
		buf->page_offset = stmmac_rx_offset(priv);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->sph && !buf->sec_page) {
 | 
						|
		buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
 | 
						|
		if (!buf->sec_page)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
		buf->sec_addr = page_pool_get_dma_addr(buf->sec_page);
 | 
						|
		stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
 | 
						|
	} else {
 | 
						|
		buf->sec_page = NULL;
 | 
						|
		stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
 | 
						|
	}
 | 
						|
 | 
						|
	buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
 | 
						|
 | 
						|
	stmmac_set_desc_addr(priv, p, buf->addr);
 | 
						|
	if (dma_conf->dma_buf_sz == BUF_SIZE_16KiB)
 | 
						|
		stmmac_init_desc3(priv, p);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_free_rx_buffer - free RX dma buffers
 | 
						|
 * @priv: private structure
 | 
						|
 * @rx_q: RX queue
 | 
						|
 * @i: buffer index.
 | 
						|
 */
 | 
						|
static void stmmac_free_rx_buffer(struct stmmac_priv *priv,
 | 
						|
				  struct stmmac_rx_queue *rx_q,
 | 
						|
				  int i)
 | 
						|
{
 | 
						|
	struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
 | 
						|
 | 
						|
	if (buf->page)
 | 
						|
		page_pool_put_full_page(rx_q->page_pool, buf->page, false);
 | 
						|
	buf->page = NULL;
 | 
						|
 | 
						|
	if (buf->sec_page)
 | 
						|
		page_pool_put_full_page(rx_q->page_pool, buf->sec_page, false);
 | 
						|
	buf->sec_page = NULL;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_free_tx_buffer - free RX dma buffers
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 * @i: buffer index.
 | 
						|
 */
 | 
						|
static void stmmac_free_tx_buffer(struct stmmac_priv *priv,
 | 
						|
				  struct stmmac_dma_conf *dma_conf,
 | 
						|
				  u32 queue, int i)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
 | 
						|
	if (tx_q->tx_skbuff_dma[i].buf &&
 | 
						|
	    tx_q->tx_skbuff_dma[i].buf_type != STMMAC_TXBUF_T_XDP_TX) {
 | 
						|
		if (tx_q->tx_skbuff_dma[i].map_as_page)
 | 
						|
			dma_unmap_page(priv->device,
 | 
						|
				       tx_q->tx_skbuff_dma[i].buf,
 | 
						|
				       tx_q->tx_skbuff_dma[i].len,
 | 
						|
				       DMA_TO_DEVICE);
 | 
						|
		else
 | 
						|
			dma_unmap_single(priv->device,
 | 
						|
					 tx_q->tx_skbuff_dma[i].buf,
 | 
						|
					 tx_q->tx_skbuff_dma[i].len,
 | 
						|
					 DMA_TO_DEVICE);
 | 
						|
	}
 | 
						|
 | 
						|
	if (tx_q->xdpf[i] &&
 | 
						|
	    (tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_TX ||
 | 
						|
	     tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XDP_NDO)) {
 | 
						|
		xdp_return_frame(tx_q->xdpf[i]);
 | 
						|
		tx_q->xdpf[i] = NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_XSK_TX)
 | 
						|
		tx_q->xsk_frames_done++;
 | 
						|
 | 
						|
	if (tx_q->tx_skbuff[i] &&
 | 
						|
	    tx_q->tx_skbuff_dma[i].buf_type == STMMAC_TXBUF_T_SKB) {
 | 
						|
		dev_kfree_skb_any(tx_q->tx_skbuff[i]);
 | 
						|
		tx_q->tx_skbuff[i] = NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	tx_q->tx_skbuff_dma[i].buf = 0;
 | 
						|
	tx_q->tx_skbuff_dma[i].map_as_page = false;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * dma_free_rx_skbufs - free RX dma buffers
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 */
 | 
						|
static void dma_free_rx_skbufs(struct stmmac_priv *priv,
 | 
						|
			       struct stmmac_dma_conf *dma_conf,
 | 
						|
			       u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_rx_size; i++)
 | 
						|
		stmmac_free_rx_buffer(priv, rx_q, i);
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_alloc_rx_buffers(struct stmmac_priv *priv,
 | 
						|
				   struct stmmac_dma_conf *dma_conf,
 | 
						|
				   u32 queue, gfp_t flags)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_rx_size; i++) {
 | 
						|
		struct dma_desc *p;
 | 
						|
		int ret;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = &((rx_q->dma_erx + i)->basic);
 | 
						|
		else
 | 
						|
			p = rx_q->dma_rx + i;
 | 
						|
 | 
						|
		ret = stmmac_init_rx_buffers(priv, dma_conf, p, i, flags,
 | 
						|
					     queue);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
 | 
						|
		rx_q->buf_alloc_num++;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * dma_free_rx_xskbufs - free RX dma buffers from XSK pool
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 */
 | 
						|
static void dma_free_rx_xskbufs(struct stmmac_priv *priv,
 | 
						|
				struct stmmac_dma_conf *dma_conf,
 | 
						|
				u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_rx_size; i++) {
 | 
						|
		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[i];
 | 
						|
 | 
						|
		if (!buf->xdp)
 | 
						|
			continue;
 | 
						|
 | 
						|
		xsk_buff_free(buf->xdp);
 | 
						|
		buf->xdp = NULL;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_alloc_rx_buffers_zc(struct stmmac_priv *priv,
 | 
						|
				      struct stmmac_dma_conf *dma_conf,
 | 
						|
				      u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_rx_size; i++) {
 | 
						|
		struct stmmac_rx_buffer *buf;
 | 
						|
		dma_addr_t dma_addr;
 | 
						|
		struct dma_desc *p;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = (struct dma_desc *)(rx_q->dma_erx + i);
 | 
						|
		else
 | 
						|
			p = rx_q->dma_rx + i;
 | 
						|
 | 
						|
		buf = &rx_q->buf_pool[i];
 | 
						|
 | 
						|
		buf->xdp = xsk_buff_alloc(rx_q->xsk_pool);
 | 
						|
		if (!buf->xdp)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
		dma_addr = xsk_buff_xdp_get_dma(buf->xdp);
 | 
						|
		stmmac_set_desc_addr(priv, p, dma_addr);
 | 
						|
		rx_q->buf_alloc_num++;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct xsk_buff_pool *stmmac_get_xsk_pool(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	if (!stmmac_xdp_is_enabled(priv) || !test_bit(queue, priv->af_xdp_zc_qps))
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	return xsk_get_pool_from_qid(priv->dev, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __init_dma_rx_desc_rings - init the RX descriptor ring (per queue)
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 * @flags: gfp flag.
 | 
						|
 * Description: this function initializes the DMA RX descriptors
 | 
						|
 * and allocates the socket buffers. It supports the chained and ring
 | 
						|
 * modes.
 | 
						|
 */
 | 
						|
static int __init_dma_rx_desc_rings(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf,
 | 
						|
				    u32 queue, gfp_t flags)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	int ret;
 | 
						|
 | 
						|
	netif_dbg(priv, probe, priv->dev,
 | 
						|
		  "(%s) dma_rx_phy=0x%08x\n", __func__,
 | 
						|
		  (u32)rx_q->dma_rx_phy);
 | 
						|
 | 
						|
	stmmac_clear_rx_descriptors(priv, dma_conf, queue);
 | 
						|
 | 
						|
	xdp_rxq_info_unreg_mem_model(&rx_q->xdp_rxq);
 | 
						|
 | 
						|
	rx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
 | 
						|
 | 
						|
	if (rx_q->xsk_pool) {
 | 
						|
		WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
 | 
						|
						   MEM_TYPE_XSK_BUFF_POOL,
 | 
						|
						   NULL));
 | 
						|
		netdev_info(priv->dev,
 | 
						|
			    "Register MEM_TYPE_XSK_BUFF_POOL RxQ-%d\n",
 | 
						|
			    rx_q->queue_index);
 | 
						|
		xsk_pool_set_rxq_info(rx_q->xsk_pool, &rx_q->xdp_rxq);
 | 
						|
	} else {
 | 
						|
		WARN_ON(xdp_rxq_info_reg_mem_model(&rx_q->xdp_rxq,
 | 
						|
						   MEM_TYPE_PAGE_POOL,
 | 
						|
						   rx_q->page_pool));
 | 
						|
		netdev_info(priv->dev,
 | 
						|
			    "Register MEM_TYPE_PAGE_POOL RxQ-%d\n",
 | 
						|
			    rx_q->queue_index);
 | 
						|
	}
 | 
						|
 | 
						|
	if (rx_q->xsk_pool) {
 | 
						|
		/* RX XDP ZC buffer pool may not be populated, e.g.
 | 
						|
		 * xdpsock TX-only.
 | 
						|
		 */
 | 
						|
		stmmac_alloc_rx_buffers_zc(priv, dma_conf, queue);
 | 
						|
	} else {
 | 
						|
		ret = stmmac_alloc_rx_buffers(priv, dma_conf, queue, flags);
 | 
						|
		if (ret < 0)
 | 
						|
			return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Setup the chained descriptor addresses */
 | 
						|
	if (priv->mode == STMMAC_CHAIN_MODE) {
 | 
						|
		if (priv->extend_desc)
 | 
						|
			stmmac_mode_init(priv, rx_q->dma_erx,
 | 
						|
					 rx_q->dma_rx_phy,
 | 
						|
					 dma_conf->dma_rx_size, 1);
 | 
						|
		else
 | 
						|
			stmmac_mode_init(priv, rx_q->dma_rx,
 | 
						|
					 rx_q->dma_rx_phy,
 | 
						|
					 dma_conf->dma_rx_size, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int init_dma_rx_desc_rings(struct net_device *dev,
 | 
						|
				  struct stmmac_dma_conf *dma_conf,
 | 
						|
				  gfp_t flags)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 rx_count = priv->plat->rx_queues_to_use;
 | 
						|
	int queue;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* RX INITIALIZATION */
 | 
						|
	netif_dbg(priv, probe, priv->dev,
 | 
						|
		  "SKB addresses:\nskb\t\tskb data\tdma data\n");
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_count; queue++) {
 | 
						|
		ret = __init_dma_rx_desc_rings(priv, dma_conf, queue, flags);
 | 
						|
		if (ret)
 | 
						|
			goto err_init_rx_buffers;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_init_rx_buffers:
 | 
						|
	while (queue >= 0) {
 | 
						|
		struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
 | 
						|
		if (rx_q->xsk_pool)
 | 
						|
			dma_free_rx_xskbufs(priv, dma_conf, queue);
 | 
						|
		else
 | 
						|
			dma_free_rx_skbufs(priv, dma_conf, queue);
 | 
						|
 | 
						|
		rx_q->buf_alloc_num = 0;
 | 
						|
		rx_q->xsk_pool = NULL;
 | 
						|
 | 
						|
		queue--;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __init_dma_tx_desc_rings - init the TX descriptor ring (per queue)
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: TX queue index
 | 
						|
 * Description: this function initializes the DMA TX descriptors
 | 
						|
 * and allocates the socket buffers. It supports the chained and ring
 | 
						|
 * modes.
 | 
						|
 */
 | 
						|
static int __init_dma_tx_desc_rings(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf,
 | 
						|
				    u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	netif_dbg(priv, probe, priv->dev,
 | 
						|
		  "(%s) dma_tx_phy=0x%08x\n", __func__,
 | 
						|
		  (u32)tx_q->dma_tx_phy);
 | 
						|
 | 
						|
	/* Setup the chained descriptor addresses */
 | 
						|
	if (priv->mode == STMMAC_CHAIN_MODE) {
 | 
						|
		if (priv->extend_desc)
 | 
						|
			stmmac_mode_init(priv, tx_q->dma_etx,
 | 
						|
					 tx_q->dma_tx_phy,
 | 
						|
					 dma_conf->dma_tx_size, 1);
 | 
						|
		else if (!(tx_q->tbs & STMMAC_TBS_AVAIL))
 | 
						|
			stmmac_mode_init(priv, tx_q->dma_tx,
 | 
						|
					 tx_q->dma_tx_phy,
 | 
						|
					 dma_conf->dma_tx_size, 0);
 | 
						|
	}
 | 
						|
 | 
						|
	tx_q->xsk_pool = stmmac_get_xsk_pool(priv, queue);
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_tx_size; i++) {
 | 
						|
		struct dma_desc *p;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = &((tx_q->dma_etx + i)->basic);
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			p = &((tx_q->dma_entx + i)->basic);
 | 
						|
		else
 | 
						|
			p = tx_q->dma_tx + i;
 | 
						|
 | 
						|
		stmmac_clear_desc(priv, p);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[i].buf = 0;
 | 
						|
		tx_q->tx_skbuff_dma[i].map_as_page = false;
 | 
						|
		tx_q->tx_skbuff_dma[i].len = 0;
 | 
						|
		tx_q->tx_skbuff_dma[i].last_segment = false;
 | 
						|
		tx_q->tx_skbuff[i] = NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int init_dma_tx_desc_rings(struct net_device *dev,
 | 
						|
				  struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 tx_queue_cnt;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	tx_queue_cnt = priv->plat->tx_queues_to_use;
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_queue_cnt; queue++)
 | 
						|
		__init_dma_tx_desc_rings(priv, dma_conf, queue);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * init_dma_desc_rings - init the RX/TX descriptor rings
 | 
						|
 * @dev: net device structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @flags: gfp flag.
 | 
						|
 * Description: this function initializes the DMA RX/TX descriptors
 | 
						|
 * and allocates the socket buffers. It supports the chained and ring
 | 
						|
 * modes.
 | 
						|
 */
 | 
						|
static int init_dma_desc_rings(struct net_device *dev,
 | 
						|
			       struct stmmac_dma_conf *dma_conf,
 | 
						|
			       gfp_t flags)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = init_dma_rx_desc_rings(dev, dma_conf, flags);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = init_dma_tx_desc_rings(dev, dma_conf);
 | 
						|
 | 
						|
	stmmac_clear_descriptors(priv, dma_conf);
 | 
						|
 | 
						|
	if (netif_msg_hw(priv))
 | 
						|
		stmmac_display_rings(priv, dma_conf);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * dma_free_tx_skbufs - free TX dma buffers
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: TX queue index
 | 
						|
 */
 | 
						|
static void dma_free_tx_skbufs(struct stmmac_priv *priv,
 | 
						|
			       struct stmmac_dma_conf *dma_conf,
 | 
						|
			       u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
	int i;
 | 
						|
 | 
						|
	tx_q->xsk_frames_done = 0;
 | 
						|
 | 
						|
	for (i = 0; i < dma_conf->dma_tx_size; i++)
 | 
						|
		stmmac_free_tx_buffer(priv, dma_conf, queue, i);
 | 
						|
 | 
						|
	if (tx_q->xsk_pool && tx_q->xsk_frames_done) {
 | 
						|
		xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
 | 
						|
		tx_q->xsk_frames_done = 0;
 | 
						|
		tx_q->xsk_pool = NULL;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_free_tx_skbufs - free TX skb buffers
 | 
						|
 * @priv: private structure
 | 
						|
 */
 | 
						|
static void stmmac_free_tx_skbufs(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_queue_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_queue_cnt; queue++)
 | 
						|
		dma_free_tx_skbufs(priv, &priv->dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __free_dma_rx_desc_resources - free RX dma desc resources (per queue)
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 */
 | 
						|
static void __free_dma_rx_desc_resources(struct stmmac_priv *priv,
 | 
						|
					 struct stmmac_dma_conf *dma_conf,
 | 
						|
					 u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
 | 
						|
	/* Release the DMA RX socket buffers */
 | 
						|
	if (rx_q->xsk_pool)
 | 
						|
		dma_free_rx_xskbufs(priv, dma_conf, queue);
 | 
						|
	else
 | 
						|
		dma_free_rx_skbufs(priv, dma_conf, queue);
 | 
						|
 | 
						|
	rx_q->buf_alloc_num = 0;
 | 
						|
	rx_q->xsk_pool = NULL;
 | 
						|
 | 
						|
	/* Free DMA regions of consistent memory previously allocated */
 | 
						|
	if (!priv->extend_desc)
 | 
						|
		dma_free_coherent(priv->device, dma_conf->dma_rx_size *
 | 
						|
				  sizeof(struct dma_desc),
 | 
						|
				  rx_q->dma_rx, rx_q->dma_rx_phy);
 | 
						|
	else
 | 
						|
		dma_free_coherent(priv->device, dma_conf->dma_rx_size *
 | 
						|
				  sizeof(struct dma_extended_desc),
 | 
						|
				  rx_q->dma_erx, rx_q->dma_rx_phy);
 | 
						|
 | 
						|
	if (xdp_rxq_info_is_reg(&rx_q->xdp_rxq))
 | 
						|
		xdp_rxq_info_unreg(&rx_q->xdp_rxq);
 | 
						|
 | 
						|
	kfree(rx_q->buf_pool);
 | 
						|
	if (rx_q->page_pool)
 | 
						|
		page_pool_destroy(rx_q->page_pool);
 | 
						|
}
 | 
						|
 | 
						|
static void free_dma_rx_desc_resources(struct stmmac_priv *priv,
 | 
						|
				       struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 rx_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* Free RX queue resources */
 | 
						|
	for (queue = 0; queue < rx_count; queue++)
 | 
						|
		__free_dma_rx_desc_resources(priv, dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __free_dma_tx_desc_resources - free TX dma desc resources (per queue)
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: TX queue index
 | 
						|
 */
 | 
						|
static void __free_dma_tx_desc_resources(struct stmmac_priv *priv,
 | 
						|
					 struct stmmac_dma_conf *dma_conf,
 | 
						|
					 u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
	size_t size;
 | 
						|
	void *addr;
 | 
						|
 | 
						|
	/* Release the DMA TX socket buffers */
 | 
						|
	dma_free_tx_skbufs(priv, dma_conf, queue);
 | 
						|
 | 
						|
	if (priv->extend_desc) {
 | 
						|
		size = sizeof(struct dma_extended_desc);
 | 
						|
		addr = tx_q->dma_etx;
 | 
						|
	} else if (tx_q->tbs & STMMAC_TBS_AVAIL) {
 | 
						|
		size = sizeof(struct dma_edesc);
 | 
						|
		addr = tx_q->dma_entx;
 | 
						|
	} else {
 | 
						|
		size = sizeof(struct dma_desc);
 | 
						|
		addr = tx_q->dma_tx;
 | 
						|
	}
 | 
						|
 | 
						|
	size *= dma_conf->dma_tx_size;
 | 
						|
 | 
						|
	dma_free_coherent(priv->device, size, addr, tx_q->dma_tx_phy);
 | 
						|
 | 
						|
	kfree(tx_q->tx_skbuff_dma);
 | 
						|
	kfree(tx_q->tx_skbuff);
 | 
						|
}
 | 
						|
 | 
						|
static void free_dma_tx_desc_resources(struct stmmac_priv *priv,
 | 
						|
				       struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 tx_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* Free TX queue resources */
 | 
						|
	for (queue = 0; queue < tx_count; queue++)
 | 
						|
		__free_dma_tx_desc_resources(priv, dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __alloc_dma_rx_desc_resources - alloc RX resources (per queue).
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: RX queue index
 | 
						|
 * Description: according to which descriptor can be used (extend or basic)
 | 
						|
 * this function allocates the resources for TX and RX paths. In case of
 | 
						|
 * reception, for example, it pre-allocated the RX socket buffer in order to
 | 
						|
 * allow zero-copy mechanism.
 | 
						|
 */
 | 
						|
static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
 | 
						|
					 struct stmmac_dma_conf *dma_conf,
 | 
						|
					 u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &dma_conf->rx_queue[queue];
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	bool xdp_prog = stmmac_xdp_is_enabled(priv);
 | 
						|
	struct page_pool_params pp_params = { 0 };
 | 
						|
	unsigned int num_pages;
 | 
						|
	unsigned int napi_id;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	rx_q->queue_index = queue;
 | 
						|
	rx_q->priv_data = priv;
 | 
						|
 | 
						|
	pp_params.flags = PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV;
 | 
						|
	pp_params.pool_size = dma_conf->dma_rx_size;
 | 
						|
	num_pages = DIV_ROUND_UP(dma_conf->dma_buf_sz, PAGE_SIZE);
 | 
						|
	pp_params.order = ilog2(num_pages);
 | 
						|
	pp_params.nid = dev_to_node(priv->device);
 | 
						|
	pp_params.dev = priv->device;
 | 
						|
	pp_params.dma_dir = xdp_prog ? DMA_BIDIRECTIONAL : DMA_FROM_DEVICE;
 | 
						|
	pp_params.offset = stmmac_rx_offset(priv);
 | 
						|
	pp_params.max_len = STMMAC_MAX_RX_BUF_SIZE(num_pages);
 | 
						|
 | 
						|
	rx_q->page_pool = page_pool_create(&pp_params);
 | 
						|
	if (IS_ERR(rx_q->page_pool)) {
 | 
						|
		ret = PTR_ERR(rx_q->page_pool);
 | 
						|
		rx_q->page_pool = NULL;
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	rx_q->buf_pool = kcalloc(dma_conf->dma_rx_size,
 | 
						|
				 sizeof(*rx_q->buf_pool),
 | 
						|
				 GFP_KERNEL);
 | 
						|
	if (!rx_q->buf_pool)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	if (priv->extend_desc) {
 | 
						|
		rx_q->dma_erx = dma_alloc_coherent(priv->device,
 | 
						|
						   dma_conf->dma_rx_size *
 | 
						|
						   sizeof(struct dma_extended_desc),
 | 
						|
						   &rx_q->dma_rx_phy,
 | 
						|
						   GFP_KERNEL);
 | 
						|
		if (!rx_q->dma_erx)
 | 
						|
			return -ENOMEM;
 | 
						|
 | 
						|
	} else {
 | 
						|
		rx_q->dma_rx = dma_alloc_coherent(priv->device,
 | 
						|
						  dma_conf->dma_rx_size *
 | 
						|
						  sizeof(struct dma_desc),
 | 
						|
						  &rx_q->dma_rx_phy,
 | 
						|
						  GFP_KERNEL);
 | 
						|
		if (!rx_q->dma_rx)
 | 
						|
			return -ENOMEM;
 | 
						|
	}
 | 
						|
 | 
						|
	if (stmmac_xdp_is_enabled(priv) &&
 | 
						|
	    test_bit(queue, priv->af_xdp_zc_qps))
 | 
						|
		napi_id = ch->rxtx_napi.napi_id;
 | 
						|
	else
 | 
						|
		napi_id = ch->rx_napi.napi_id;
 | 
						|
 | 
						|
	ret = xdp_rxq_info_reg(&rx_q->xdp_rxq, priv->dev,
 | 
						|
			       rx_q->queue_index,
 | 
						|
			       napi_id);
 | 
						|
	if (ret) {
 | 
						|
		netdev_err(priv->dev, "Failed to register xdp rxq info\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
 | 
						|
				       struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 rx_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* RX queues buffers and DMA */
 | 
						|
	for (queue = 0; queue < rx_count; queue++) {
 | 
						|
		ret = __alloc_dma_rx_desc_resources(priv, dma_conf, queue);
 | 
						|
		if (ret)
 | 
						|
			goto err_dma;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_dma:
 | 
						|
	free_dma_rx_desc_resources(priv, dma_conf);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * __alloc_dma_tx_desc_resources - alloc TX resources (per queue).
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * @queue: TX queue index
 | 
						|
 * Description: according to which descriptor can be used (extend or basic)
 | 
						|
 * this function allocates the resources for TX and RX paths. In case of
 | 
						|
 * reception, for example, it pre-allocated the RX socket buffer in order to
 | 
						|
 * allow zero-copy mechanism.
 | 
						|
 */
 | 
						|
static int __alloc_dma_tx_desc_resources(struct stmmac_priv *priv,
 | 
						|
					 struct stmmac_dma_conf *dma_conf,
 | 
						|
					 u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[queue];
 | 
						|
	size_t size;
 | 
						|
	void *addr;
 | 
						|
 | 
						|
	tx_q->queue_index = queue;
 | 
						|
	tx_q->priv_data = priv;
 | 
						|
 | 
						|
	tx_q->tx_skbuff_dma = kcalloc(dma_conf->dma_tx_size,
 | 
						|
				      sizeof(*tx_q->tx_skbuff_dma),
 | 
						|
				      GFP_KERNEL);
 | 
						|
	if (!tx_q->tx_skbuff_dma)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	tx_q->tx_skbuff = kcalloc(dma_conf->dma_tx_size,
 | 
						|
				  sizeof(struct sk_buff *),
 | 
						|
				  GFP_KERNEL);
 | 
						|
	if (!tx_q->tx_skbuff)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	if (priv->extend_desc)
 | 
						|
		size = sizeof(struct dma_extended_desc);
 | 
						|
	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		size = sizeof(struct dma_edesc);
 | 
						|
	else
 | 
						|
		size = sizeof(struct dma_desc);
 | 
						|
 | 
						|
	size *= dma_conf->dma_tx_size;
 | 
						|
 | 
						|
	addr = dma_alloc_coherent(priv->device, size,
 | 
						|
				  &tx_q->dma_tx_phy, GFP_KERNEL);
 | 
						|
	if (!addr)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	if (priv->extend_desc)
 | 
						|
		tx_q->dma_etx = addr;
 | 
						|
	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		tx_q->dma_entx = addr;
 | 
						|
	else
 | 
						|
		tx_q->dma_tx = addr;
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv,
 | 
						|
				       struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	u32 tx_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* TX queues buffers and DMA */
 | 
						|
	for (queue = 0; queue < tx_count; queue++) {
 | 
						|
		ret = __alloc_dma_tx_desc_resources(priv, dma_conf, queue);
 | 
						|
		if (ret)
 | 
						|
			goto err_dma;
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
err_dma:
 | 
						|
	free_dma_tx_desc_resources(priv, dma_conf);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * alloc_dma_desc_resources - alloc TX/RX resources.
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 * Description: according to which descriptor can be used (extend or basic)
 | 
						|
 * this function allocates the resources for TX and RX paths. In case of
 | 
						|
 * reception, for example, it pre-allocated the RX socket buffer in order to
 | 
						|
 * allow zero-copy mechanism.
 | 
						|
 */
 | 
						|
static int alloc_dma_desc_resources(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	/* RX Allocation */
 | 
						|
	int ret = alloc_dma_rx_desc_resources(priv, dma_conf);
 | 
						|
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = alloc_dma_tx_desc_resources(priv, dma_conf);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * free_dma_desc_resources - free dma desc resources
 | 
						|
 * @priv: private structure
 | 
						|
 * @dma_conf: structure to take the dma data
 | 
						|
 */
 | 
						|
static void free_dma_desc_resources(struct stmmac_priv *priv,
 | 
						|
				    struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	/* Release the DMA TX socket buffers */
 | 
						|
	free_dma_tx_desc_resources(priv, dma_conf);
 | 
						|
 | 
						|
	/* Release the DMA RX socket buffers later
 | 
						|
	 * to ensure all pending XDP_TX buffers are returned.
 | 
						|
	 */
 | 
						|
	free_dma_rx_desc_resources(priv, dma_conf);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mac_enable_rx_queues - Enable MAC rx queues
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for enabling the rx queues in the MAC
 | 
						|
 */
 | 
						|
static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 | 
						|
	int queue;
 | 
						|
	u8 mode;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_queues_count; queue++) {
 | 
						|
		mode = priv->plat->rx_queues_cfg[queue].mode_to_use;
 | 
						|
		stmmac_rx_queue_enable(priv, priv->hw, mode, queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_start_rx_dma - start RX DMA channel
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @chan: RX channel index
 | 
						|
 * Description:
 | 
						|
 * This starts a RX DMA channel
 | 
						|
 */
 | 
						|
static void stmmac_start_rx_dma(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	netdev_dbg(priv->dev, "DMA RX processes started in channel %d\n", chan);
 | 
						|
	stmmac_start_rx(priv, priv->ioaddr, chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_start_tx_dma - start TX DMA channel
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @chan: TX channel index
 | 
						|
 * Description:
 | 
						|
 * This starts a TX DMA channel
 | 
						|
 */
 | 
						|
static void stmmac_start_tx_dma(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	netdev_dbg(priv->dev, "DMA TX processes started in channel %d\n", chan);
 | 
						|
	stmmac_start_tx(priv, priv->ioaddr, chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_stop_rx_dma - stop RX DMA channel
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @chan: RX channel index
 | 
						|
 * Description:
 | 
						|
 * This stops a RX DMA channel
 | 
						|
 */
 | 
						|
static void stmmac_stop_rx_dma(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	netdev_dbg(priv->dev, "DMA RX processes stopped in channel %d\n", chan);
 | 
						|
	stmmac_stop_rx(priv, priv->ioaddr, chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_stop_tx_dma - stop TX DMA channel
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @chan: TX channel index
 | 
						|
 * Description:
 | 
						|
 * This stops a TX DMA channel
 | 
						|
 */
 | 
						|
static void stmmac_stop_tx_dma(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	netdev_dbg(priv->dev, "DMA TX processes stopped in channel %d\n", chan);
 | 
						|
	stmmac_stop_tx(priv, priv->ioaddr, chan);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_enable_all_dma_irq(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 dma_csr_ch = max(rx_channels_count, tx_channels_count);
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	for (chan = 0; chan < dma_csr_ch; chan++) {
 | 
						|
		struct stmmac_channel *ch = &priv->channel[chan];
 | 
						|
		unsigned long flags;
 | 
						|
 | 
						|
		spin_lock_irqsave(&ch->lock, flags);
 | 
						|
		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
 | 
						|
		spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_start_all_dma - start all RX and TX DMA channels
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 * This starts all the RX and TX DMA channels
 | 
						|
 */
 | 
						|
static void stmmac_start_all_dma(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 chan = 0;
 | 
						|
 | 
						|
	for (chan = 0; chan < rx_channels_count; chan++)
 | 
						|
		stmmac_start_rx_dma(priv, chan);
 | 
						|
 | 
						|
	for (chan = 0; chan < tx_channels_count; chan++)
 | 
						|
		stmmac_start_tx_dma(priv, chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_stop_all_dma - stop all RX and TX DMA channels
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 * This stops the RX and TX DMA channels
 | 
						|
 */
 | 
						|
static void stmmac_stop_all_dma(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 chan = 0;
 | 
						|
 | 
						|
	for (chan = 0; chan < rx_channels_count; chan++)
 | 
						|
		stmmac_stop_rx_dma(priv, chan);
 | 
						|
 | 
						|
	for (chan = 0; chan < tx_channels_count; chan++)
 | 
						|
		stmmac_stop_tx_dma(priv, chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_dma_operation_mode - HW DMA operation mode
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: it is used for configuring the DMA operation mode register in
 | 
						|
 *  order to program the tx/rx DMA thresholds or Store-And-Forward mode.
 | 
						|
 */
 | 
						|
static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	int rxfifosz = priv->plat->rx_fifo_size;
 | 
						|
	int txfifosz = priv->plat->tx_fifo_size;
 | 
						|
	u32 txmode = 0;
 | 
						|
	u32 rxmode = 0;
 | 
						|
	u32 chan = 0;
 | 
						|
	u8 qmode = 0;
 | 
						|
 | 
						|
	if (rxfifosz == 0)
 | 
						|
		rxfifosz = priv->dma_cap.rx_fifo_size;
 | 
						|
	if (txfifosz == 0)
 | 
						|
		txfifosz = priv->dma_cap.tx_fifo_size;
 | 
						|
 | 
						|
	/* Adjust for real per queue fifo size */
 | 
						|
	rxfifosz /= rx_channels_count;
 | 
						|
	txfifosz /= tx_channels_count;
 | 
						|
 | 
						|
	if (priv->plat->force_thresh_dma_mode) {
 | 
						|
		txmode = tc;
 | 
						|
		rxmode = tc;
 | 
						|
	} else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
 | 
						|
		/*
 | 
						|
		 * In case of GMAC, SF mode can be enabled
 | 
						|
		 * to perform the TX COE in HW. This depends on:
 | 
						|
		 * 1) TX COE if actually supported
 | 
						|
		 * 2) There is no bugged Jumbo frame support
 | 
						|
		 *    that needs to not insert csum in the TDES.
 | 
						|
		 */
 | 
						|
		txmode = SF_DMA_MODE;
 | 
						|
		rxmode = SF_DMA_MODE;
 | 
						|
		priv->xstats.threshold = SF_DMA_MODE;
 | 
						|
	} else {
 | 
						|
		txmode = tc;
 | 
						|
		rxmode = SF_DMA_MODE;
 | 
						|
	}
 | 
						|
 | 
						|
	/* configure all channels */
 | 
						|
	for (chan = 0; chan < rx_channels_count; chan++) {
 | 
						|
		struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[chan];
 | 
						|
		u32 buf_size;
 | 
						|
 | 
						|
		qmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
 | 
						|
 | 
						|
		stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan,
 | 
						|
				rxfifosz, qmode);
 | 
						|
 | 
						|
		if (rx_q->xsk_pool) {
 | 
						|
			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
 | 
						|
			stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
					      buf_size,
 | 
						|
					      chan);
 | 
						|
		} else {
 | 
						|
			stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
					      priv->dma_conf.dma_buf_sz,
 | 
						|
					      chan);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	for (chan = 0; chan < tx_channels_count; chan++) {
 | 
						|
		qmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
 | 
						|
 | 
						|
		stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan,
 | 
						|
				txfifosz, qmode);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
 | 
						|
{
 | 
						|
	struct netdev_queue *nq = netdev_get_tx_queue(priv->dev, queue);
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	struct xsk_buff_pool *pool = tx_q->xsk_pool;
 | 
						|
	unsigned int entry = tx_q->cur_tx;
 | 
						|
	struct dma_desc *tx_desc = NULL;
 | 
						|
	struct xdp_desc xdp_desc;
 | 
						|
	bool work_done = true;
 | 
						|
 | 
						|
	/* Avoids TX time-out as we are sharing with slow path */
 | 
						|
	txq_trans_cond_update(nq);
 | 
						|
 | 
						|
	budget = min(budget, stmmac_tx_avail(priv, queue));
 | 
						|
 | 
						|
	while (budget-- > 0) {
 | 
						|
		dma_addr_t dma_addr;
 | 
						|
		bool set_ic;
 | 
						|
 | 
						|
		/* We are sharing with slow path and stop XSK TX desc submission when
 | 
						|
		 * available TX ring is less than threshold.
 | 
						|
		 */
 | 
						|
		if (unlikely(stmmac_tx_avail(priv, queue) < STMMAC_TX_XSK_AVAIL) ||
 | 
						|
		    !netif_carrier_ok(priv->dev)) {
 | 
						|
			work_done = false;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (!xsk_tx_peek_desc(pool, &xdp_desc))
 | 
						|
			break;
 | 
						|
 | 
						|
		if (likely(priv->extend_desc))
 | 
						|
			tx_desc = (struct dma_desc *)(tx_q->dma_etx + entry);
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			tx_desc = &tx_q->dma_entx[entry].basic;
 | 
						|
		else
 | 
						|
			tx_desc = tx_q->dma_tx + entry;
 | 
						|
 | 
						|
		dma_addr = xsk_buff_raw_get_dma(pool, xdp_desc.addr);
 | 
						|
		xsk_buff_raw_dma_sync_for_device(pool, dma_addr, xdp_desc.len);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XSK_TX;
 | 
						|
 | 
						|
		/* To return XDP buffer to XSK pool, we simple call
 | 
						|
		 * xsk_tx_completed(), so we don't need to fill up
 | 
						|
		 * 'buf' and 'xdpf'.
 | 
						|
		 */
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf = 0;
 | 
						|
		tx_q->xdpf[entry] = NULL;
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].map_as_page = false;
 | 
						|
		tx_q->tx_skbuff_dma[entry].len = xdp_desc.len;
 | 
						|
		tx_q->tx_skbuff_dma[entry].last_segment = true;
 | 
						|
		tx_q->tx_skbuff_dma[entry].is_jumbo = false;
 | 
						|
 | 
						|
		stmmac_set_desc_addr(priv, tx_desc, dma_addr);
 | 
						|
 | 
						|
		tx_q->tx_count_frames++;
 | 
						|
 | 
						|
		if (!priv->tx_coal_frames[queue])
 | 
						|
			set_ic = false;
 | 
						|
		else if (tx_q->tx_count_frames % priv->tx_coal_frames[queue] == 0)
 | 
						|
			set_ic = true;
 | 
						|
		else
 | 
						|
			set_ic = false;
 | 
						|
 | 
						|
		if (set_ic) {
 | 
						|
			tx_q->tx_count_frames = 0;
 | 
						|
			stmmac_set_tx_ic(priv, tx_desc);
 | 
						|
			priv->xstats.tx_set_ic_bit++;
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_prepare_tx_desc(priv, tx_desc, 1, xdp_desc.len,
 | 
						|
				       true, priv->mode, true, true,
 | 
						|
				       xdp_desc.len);
 | 
						|
 | 
						|
		stmmac_enable_dma_transmission(priv, priv->ioaddr);
 | 
						|
 | 
						|
		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_conf.dma_tx_size);
 | 
						|
		entry = tx_q->cur_tx;
 | 
						|
	}
 | 
						|
 | 
						|
	if (tx_desc) {
 | 
						|
		stmmac_flush_tx_descriptors(priv, queue);
 | 
						|
		xsk_tx_release(pool);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Return true if all of the 3 conditions are met
 | 
						|
	 *  a) TX Budget is still available
 | 
						|
	 *  b) work_done = true when XSK TX desc peek is empty (no more
 | 
						|
	 *     pending XSK TX for transmission)
 | 
						|
	 */
 | 
						|
	return !!budget && work_done;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_bump_dma_threshold(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	if (unlikely(priv->xstats.threshold != SF_DMA_MODE) && tc <= 256) {
 | 
						|
		tc += 64;
 | 
						|
 | 
						|
		if (priv->plat->force_thresh_dma_mode)
 | 
						|
			stmmac_set_dma_operation_mode(priv, tc, tc, chan);
 | 
						|
		else
 | 
						|
			stmmac_set_dma_operation_mode(priv, tc, SF_DMA_MODE,
 | 
						|
						      chan);
 | 
						|
 | 
						|
		priv->xstats.threshold = tc;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_tx_clean - to manage the transmission completion
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @budget: napi budget limiting this functions packet handling
 | 
						|
 * @queue: TX queue index
 | 
						|
 * Description: it reclaims the transmit resources after transmission completes.
 | 
						|
 */
 | 
						|
static int stmmac_tx_clean(struct stmmac_priv *priv, int budget, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	unsigned int bytes_compl = 0, pkts_compl = 0;
 | 
						|
	unsigned int entry, xmits = 0, count = 0;
 | 
						|
 | 
						|
	__netif_tx_lock_bh(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
 | 
						|
	priv->xstats.tx_clean++;
 | 
						|
 | 
						|
	tx_q->xsk_frames_done = 0;
 | 
						|
 | 
						|
	entry = tx_q->dirty_tx;
 | 
						|
 | 
						|
	/* Try to clean all TX complete frame in 1 shot */
 | 
						|
	while ((entry != tx_q->cur_tx) && count < priv->dma_conf.dma_tx_size) {
 | 
						|
		struct xdp_frame *xdpf;
 | 
						|
		struct sk_buff *skb;
 | 
						|
		struct dma_desc *p;
 | 
						|
		int status;
 | 
						|
 | 
						|
		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX ||
 | 
						|
		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
 | 
						|
			xdpf = tx_q->xdpf[entry];
 | 
						|
			skb = NULL;
 | 
						|
		} else if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
 | 
						|
			xdpf = NULL;
 | 
						|
			skb = tx_q->tx_skbuff[entry];
 | 
						|
		} else {
 | 
						|
			xdpf = NULL;
 | 
						|
			skb = NULL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = (struct dma_desc *)(tx_q->dma_etx + entry);
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			p = &tx_q->dma_entx[entry].basic;
 | 
						|
		else
 | 
						|
			p = tx_q->dma_tx + entry;
 | 
						|
 | 
						|
		status = stmmac_tx_status(priv, &priv->dev->stats,
 | 
						|
				&priv->xstats, p, priv->ioaddr);
 | 
						|
		/* Check if the descriptor is owned by the DMA */
 | 
						|
		if (unlikely(status & tx_dma_own))
 | 
						|
			break;
 | 
						|
 | 
						|
		count++;
 | 
						|
 | 
						|
		/* Make sure descriptor fields are read after reading
 | 
						|
		 * the own bit.
 | 
						|
		 */
 | 
						|
		dma_rmb();
 | 
						|
 | 
						|
		/* Just consider the last segment and ...*/
 | 
						|
		if (likely(!(status & tx_not_ls))) {
 | 
						|
			/* ... verify the status error condition */
 | 
						|
			if (unlikely(status & tx_err)) {
 | 
						|
				priv->dev->stats.tx_errors++;
 | 
						|
				if (unlikely(status & tx_err_bump_tc))
 | 
						|
					stmmac_bump_dma_threshold(priv, queue);
 | 
						|
			} else {
 | 
						|
				priv->dev->stats.tx_packets++;
 | 
						|
				priv->xstats.tx_pkt_n++;
 | 
						|
				priv->xstats.txq_stats[queue].tx_pkt_n++;
 | 
						|
			}
 | 
						|
			if (skb)
 | 
						|
				stmmac_get_tx_hwtstamp(priv, p, skb);
 | 
						|
		}
 | 
						|
 | 
						|
		if (likely(tx_q->tx_skbuff_dma[entry].buf &&
 | 
						|
			   tx_q->tx_skbuff_dma[entry].buf_type != STMMAC_TXBUF_T_XDP_TX)) {
 | 
						|
			if (tx_q->tx_skbuff_dma[entry].map_as_page)
 | 
						|
				dma_unmap_page(priv->device,
 | 
						|
					       tx_q->tx_skbuff_dma[entry].buf,
 | 
						|
					       tx_q->tx_skbuff_dma[entry].len,
 | 
						|
					       DMA_TO_DEVICE);
 | 
						|
			else
 | 
						|
				dma_unmap_single(priv->device,
 | 
						|
						 tx_q->tx_skbuff_dma[entry].buf,
 | 
						|
						 tx_q->tx_skbuff_dma[entry].len,
 | 
						|
						 DMA_TO_DEVICE);
 | 
						|
			tx_q->tx_skbuff_dma[entry].buf = 0;
 | 
						|
			tx_q->tx_skbuff_dma[entry].len = 0;
 | 
						|
			tx_q->tx_skbuff_dma[entry].map_as_page = false;
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_clean_desc3(priv, tx_q, p);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].last_segment = false;
 | 
						|
		tx_q->tx_skbuff_dma[entry].is_jumbo = false;
 | 
						|
 | 
						|
		if (xdpf &&
 | 
						|
		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_TX) {
 | 
						|
			xdp_return_frame_rx_napi(xdpf);
 | 
						|
			tx_q->xdpf[entry] = NULL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (xdpf &&
 | 
						|
		    tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XDP_NDO) {
 | 
						|
			xdp_return_frame(xdpf);
 | 
						|
			tx_q->xdpf[entry] = NULL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_XSK_TX)
 | 
						|
			tx_q->xsk_frames_done++;
 | 
						|
 | 
						|
		if (tx_q->tx_skbuff_dma[entry].buf_type == STMMAC_TXBUF_T_SKB) {
 | 
						|
			if (likely(skb)) {
 | 
						|
				pkts_compl++;
 | 
						|
				bytes_compl += skb->len;
 | 
						|
				dev_consume_skb_any(skb);
 | 
						|
				tx_q->tx_skbuff[entry] = NULL;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_release_tx_desc(priv, p, priv->mode);
 | 
						|
 | 
						|
		entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
 | 
						|
	}
 | 
						|
	tx_q->dirty_tx = entry;
 | 
						|
 | 
						|
	netdev_tx_completed_queue(netdev_get_tx_queue(priv->dev, queue),
 | 
						|
				  pkts_compl, bytes_compl);
 | 
						|
 | 
						|
	if (unlikely(netif_tx_queue_stopped(netdev_get_tx_queue(priv->dev,
 | 
						|
								queue))) &&
 | 
						|
	    stmmac_tx_avail(priv, queue) > STMMAC_TX_THRESH(priv)) {
 | 
						|
 | 
						|
		netif_dbg(priv, tx_done, priv->dev,
 | 
						|
			  "%s: restart transmit\n", __func__);
 | 
						|
		netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
	}
 | 
						|
 | 
						|
	if (tx_q->xsk_pool) {
 | 
						|
		bool work_done;
 | 
						|
 | 
						|
		if (tx_q->xsk_frames_done)
 | 
						|
			xsk_tx_completed(tx_q->xsk_pool, tx_q->xsk_frames_done);
 | 
						|
 | 
						|
		if (xsk_uses_need_wakeup(tx_q->xsk_pool))
 | 
						|
			xsk_set_tx_need_wakeup(tx_q->xsk_pool);
 | 
						|
 | 
						|
		/* For XSK TX, we try to send as many as possible.
 | 
						|
		 * If XSK work done (XSK TX desc empty and budget still
 | 
						|
		 * available), return "budget - 1" to reenable TX IRQ.
 | 
						|
		 * Else, return "budget" to make NAPI continue polling.
 | 
						|
		 */
 | 
						|
		work_done = stmmac_xdp_xmit_zc(priv, queue,
 | 
						|
					       STMMAC_XSK_TX_BUDGET_MAX);
 | 
						|
		if (work_done)
 | 
						|
			xmits = budget - 1;
 | 
						|
		else
 | 
						|
			xmits = budget;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->eee_enabled && !priv->tx_path_in_lpi_mode &&
 | 
						|
	    priv->eee_sw_timer_en) {
 | 
						|
		if (stmmac_enable_eee_mode(priv))
 | 
						|
			mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_T(priv->tx_lpi_timer));
 | 
						|
	}
 | 
						|
 | 
						|
	/* We still have pending packets, let's call for a new scheduling */
 | 
						|
	if (tx_q->dirty_tx != tx_q->cur_tx)
 | 
						|
		stmmac_tx_timer_arm(priv, queue);
 | 
						|
 | 
						|
	__netif_tx_unlock_bh(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
 | 
						|
	/* Combine decisions from TX clean and XSK TX */
 | 
						|
	return max(count, xmits);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_tx_err - to manage the tx error
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @chan: channel index
 | 
						|
 * Description: it cleans the descriptors and restarts the transmission
 | 
						|
 * in case of transmission errors.
 | 
						|
 */
 | 
						|
static void stmmac_tx_err(struct stmmac_priv *priv, u32 chan)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
 | 
						|
	netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, chan));
 | 
						|
 | 
						|
	stmmac_stop_tx_dma(priv, chan);
 | 
						|
	dma_free_tx_skbufs(priv, &priv->dma_conf, chan);
 | 
						|
	stmmac_clear_tx_descriptors(priv, &priv->dma_conf, chan);
 | 
						|
	stmmac_reset_tx_queue(priv, chan);
 | 
						|
	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
			    tx_q->dma_tx_phy, chan);
 | 
						|
	stmmac_start_tx_dma(priv, chan);
 | 
						|
 | 
						|
	priv->dev->stats.tx_errors++;
 | 
						|
	netif_tx_wake_queue(netdev_get_tx_queue(priv->dev, chan));
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_set_dma_operation_mode - Set DMA operation mode by channel
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  @txmode: TX operating mode
 | 
						|
 *  @rxmode: RX operating mode
 | 
						|
 *  @chan: channel index
 | 
						|
 *  Description: it is used for configuring of the DMA operation mode in
 | 
						|
 *  runtime in order to program the tx/rx DMA thresholds or Store-And-Forward
 | 
						|
 *  mode.
 | 
						|
 */
 | 
						|
static void stmmac_set_dma_operation_mode(struct stmmac_priv *priv, u32 txmode,
 | 
						|
					  u32 rxmode, u32 chan)
 | 
						|
{
 | 
						|
	u8 rxqmode = priv->plat->rx_queues_cfg[chan].mode_to_use;
 | 
						|
	u8 txqmode = priv->plat->tx_queues_cfg[chan].mode_to_use;
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	int rxfifosz = priv->plat->rx_fifo_size;
 | 
						|
	int txfifosz = priv->plat->tx_fifo_size;
 | 
						|
 | 
						|
	if (rxfifosz == 0)
 | 
						|
		rxfifosz = priv->dma_cap.rx_fifo_size;
 | 
						|
	if (txfifosz == 0)
 | 
						|
		txfifosz = priv->dma_cap.tx_fifo_size;
 | 
						|
 | 
						|
	/* Adjust for real per queue fifo size */
 | 
						|
	rxfifosz /= rx_channels_count;
 | 
						|
	txfifosz /= tx_channels_count;
 | 
						|
 | 
						|
	stmmac_dma_rx_mode(priv, priv->ioaddr, rxmode, chan, rxfifosz, rxqmode);
 | 
						|
	stmmac_dma_tx_mode(priv, priv->ioaddr, txmode, chan, txfifosz, txqmode);
 | 
						|
}
 | 
						|
 | 
						|
static bool stmmac_safety_feat_interrupt(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = stmmac_safety_feat_irq_status(priv, priv->dev,
 | 
						|
			priv->ioaddr, priv->dma_cap.asp, &priv->sstats);
 | 
						|
	if (ret && (ret != -EINVAL)) {
 | 
						|
		stmmac_global_err(priv);
 | 
						|
		return true;
 | 
						|
	}
 | 
						|
 | 
						|
	return false;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan, u32 dir)
 | 
						|
{
 | 
						|
	int status = stmmac_dma_interrupt_status(priv, priv->ioaddr,
 | 
						|
						 &priv->xstats, chan, dir);
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[chan];
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
	struct stmmac_channel *ch = &priv->channel[chan];
 | 
						|
	struct napi_struct *rx_napi;
 | 
						|
	struct napi_struct *tx_napi;
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	rx_napi = rx_q->xsk_pool ? &ch->rxtx_napi : &ch->rx_napi;
 | 
						|
	tx_napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
 | 
						|
 | 
						|
	if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
 | 
						|
		if (napi_schedule_prep(rx_napi)) {
 | 
						|
			spin_lock_irqsave(&ch->lock, flags);
 | 
						|
			stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
 | 
						|
			spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
			__napi_schedule(rx_napi);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if ((status & handle_tx) && (chan < priv->plat->tx_queues_to_use)) {
 | 
						|
		if (napi_schedule_prep(tx_napi)) {
 | 
						|
			spin_lock_irqsave(&ch->lock, flags);
 | 
						|
			stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
 | 
						|
			spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
			__napi_schedule(tx_napi);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return status;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_dma_interrupt - DMA ISR
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this is the DMA ISR. It is called by the main ISR.
 | 
						|
 * It calls the dwmac dma routine and schedule poll method in case of some
 | 
						|
 * work can be done.
 | 
						|
 */
 | 
						|
static void stmmac_dma_interrupt(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_channel_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 rx_channel_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 channels_to_check = tx_channel_count > rx_channel_count ?
 | 
						|
				tx_channel_count : rx_channel_count;
 | 
						|
	u32 chan;
 | 
						|
	int status[max_t(u32, MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES)];
 | 
						|
 | 
						|
	/* Make sure we never check beyond our status buffer. */
 | 
						|
	if (WARN_ON_ONCE(channels_to_check > ARRAY_SIZE(status)))
 | 
						|
		channels_to_check = ARRAY_SIZE(status);
 | 
						|
 | 
						|
	for (chan = 0; chan < channels_to_check; chan++)
 | 
						|
		status[chan] = stmmac_napi_check(priv, chan,
 | 
						|
						 DMA_DIR_RXTX);
 | 
						|
 | 
						|
	for (chan = 0; chan < tx_channel_count; chan++) {
 | 
						|
		if (unlikely(status[chan] & tx_hard_error_bump_tc)) {
 | 
						|
			/* Try to bump up the dma threshold on this failure */
 | 
						|
			stmmac_bump_dma_threshold(priv, chan);
 | 
						|
		} else if (unlikely(status[chan] == tx_hard_error)) {
 | 
						|
			stmmac_tx_err(priv, chan);
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_mmc_setup: setup the Mac Management Counters (MMC)
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description: this masks the MMC irq, in fact, the counters are managed in SW.
 | 
						|
 */
 | 
						|
static void stmmac_mmc_setup(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET |
 | 
						|
			    MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET;
 | 
						|
 | 
						|
	stmmac_mmc_intr_all_mask(priv, priv->mmcaddr);
 | 
						|
 | 
						|
	if (priv->dma_cap.rmon) {
 | 
						|
		stmmac_mmc_ctrl(priv, priv->mmcaddr, mode);
 | 
						|
		memset(&priv->mmc, 0, sizeof(struct stmmac_counters));
 | 
						|
	} else
 | 
						|
		netdev_info(priv->dev, "No MAC Management Counters available\n");
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_get_hw_features - get MAC capabilities from the HW cap. register.
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 *  new GMAC chip generations have a new register to indicate the
 | 
						|
 *  presence of the optional feature/functions.
 | 
						|
 *  This can be also used to override the value passed through the
 | 
						|
 *  platform and necessary for old MAC10/100 and GMAC chips.
 | 
						|
 */
 | 
						|
static int stmmac_get_hw_features(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	return stmmac_get_hw_feature(priv, priv->ioaddr, &priv->dma_cap) == 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_check_ether_addr - check if the MAC addr is valid
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 * it is to verify if the MAC address is valid, in case of failures it
 | 
						|
 * generates a random MAC address
 | 
						|
 */
 | 
						|
static void stmmac_check_ether_addr(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u8 addr[ETH_ALEN];
 | 
						|
 | 
						|
	if (!is_valid_ether_addr(priv->dev->dev_addr)) {
 | 
						|
		stmmac_get_umac_addr(priv, priv->hw, addr, 0);
 | 
						|
		if (is_valid_ether_addr(addr))
 | 
						|
			eth_hw_addr_set(priv->dev, addr);
 | 
						|
		else if (likely(priv->plat->get_eth_addr))
 | 
						|
			priv->plat->get_eth_addr(priv->plat->bsp_priv,
 | 
						|
						 addr);
 | 
						|
		if (is_valid_ether_addr(addr))
 | 
						|
			eth_hw_addr_set(priv->dev, addr);
 | 
						|
		else
 | 
						|
			eth_hw_addr_random(priv->dev);
 | 
						|
		dev_info(priv->device, "device MAC address %pM\n",
 | 
						|
			 priv->dev->dev_addr);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_dma_engine - DMA init.
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 * It inits the DMA invoking the specific MAC/GMAC callback.
 | 
						|
 * Some DMA parameters can be passed from the platform;
 | 
						|
 * in case of these are not passed a default is kept for the MAC or GMAC.
 | 
						|
 */
 | 
						|
static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 dma_csr_ch = max(rx_channels_count, tx_channels_count);
 | 
						|
	struct stmmac_rx_queue *rx_q;
 | 
						|
	struct stmmac_tx_queue *tx_q;
 | 
						|
	u32 chan = 0;
 | 
						|
	int atds = 0;
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
 | 
						|
		dev_err(priv->device, "Invalid DMA configuration\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
 | 
						|
		atds = 1;
 | 
						|
 | 
						|
	ret = stmmac_reset(priv, priv->ioaddr);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(priv->device, "Failed to reset the dma\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* DMA Configuration */
 | 
						|
	stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds);
 | 
						|
 | 
						|
	if (priv->plat->axi)
 | 
						|
		stmmac_axi(priv, priv->ioaddr, priv->plat->axi);
 | 
						|
 | 
						|
	/* DMA CSR Channel configuration */
 | 
						|
	for (chan = 0; chan < dma_csr_ch; chan++) {
 | 
						|
		stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
 | 
						|
		stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
 | 
						|
	}
 | 
						|
 | 
						|
	/* DMA RX Channel Configuration */
 | 
						|
	for (chan = 0; chan < rx_channels_count; chan++) {
 | 
						|
		rx_q = &priv->dma_conf.rx_queue[chan];
 | 
						|
 | 
						|
		stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
				    rx_q->dma_rx_phy, chan);
 | 
						|
 | 
						|
		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
 | 
						|
				     (rx_q->buf_alloc_num *
 | 
						|
				      sizeof(struct dma_desc));
 | 
						|
		stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
 | 
						|
				       rx_q->rx_tail_addr, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	/* DMA TX Channel Configuration */
 | 
						|
	for (chan = 0; chan < tx_channels_count; chan++) {
 | 
						|
		tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
 | 
						|
		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
				    tx_q->dma_tx_phy, chan);
 | 
						|
 | 
						|
		tx_q->tx_tail_addr = tx_q->dma_tx_phy;
 | 
						|
		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
 | 
						|
				       tx_q->tx_tail_addr, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_tx_timer_arm(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	u32 tx_coal_timer = priv->tx_coal_timer[queue];
 | 
						|
 | 
						|
	if (!tx_coal_timer)
 | 
						|
		return;
 | 
						|
 | 
						|
	hrtimer_start(&tx_q->txtimer,
 | 
						|
		      STMMAC_COAL_TIMER(tx_coal_timer),
 | 
						|
		      HRTIMER_MODE_REL);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_tx_timer - mitigation sw timer for tx.
 | 
						|
 * @t: data pointer
 | 
						|
 * Description:
 | 
						|
 * This is the timer handler to directly invoke the stmmac_tx_clean.
 | 
						|
 */
 | 
						|
static enum hrtimer_restart stmmac_tx_timer(struct hrtimer *t)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = container_of(t, struct stmmac_tx_queue, txtimer);
 | 
						|
	struct stmmac_priv *priv = tx_q->priv_data;
 | 
						|
	struct stmmac_channel *ch;
 | 
						|
	struct napi_struct *napi;
 | 
						|
 | 
						|
	ch = &priv->channel[tx_q->queue_index];
 | 
						|
	napi = tx_q->xsk_pool ? &ch->rxtx_napi : &ch->tx_napi;
 | 
						|
 | 
						|
	if (likely(napi_schedule_prep(napi))) {
 | 
						|
		unsigned long flags;
 | 
						|
 | 
						|
		spin_lock_irqsave(&ch->lock, flags);
 | 
						|
		stmmac_disable_dma_irq(priv, priv->ioaddr, ch->index, 0, 1);
 | 
						|
		spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
		__napi_schedule(napi);
 | 
						|
	}
 | 
						|
 | 
						|
	return HRTIMER_NORESTART;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_init_coalesce - init mitigation options.
 | 
						|
 * @priv: driver private structure
 | 
						|
 * Description:
 | 
						|
 * This inits the coalesce parameters: i.e. timer rate,
 | 
						|
 * timer handler and default threshold used for enabling the
 | 
						|
 * interrupt on completion bit.
 | 
						|
 */
 | 
						|
static void stmmac_init_coalesce(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_channel_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 rx_channel_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	for (chan = 0; chan < tx_channel_count; chan++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
 | 
						|
		priv->tx_coal_frames[chan] = STMMAC_TX_FRAMES;
 | 
						|
		priv->tx_coal_timer[chan] = STMMAC_COAL_TX_TIMER;
 | 
						|
 | 
						|
		hrtimer_init(&tx_q->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 | 
						|
		tx_q->txtimer.function = stmmac_tx_timer;
 | 
						|
	}
 | 
						|
 | 
						|
	for (chan = 0; chan < rx_channel_count; chan++)
 | 
						|
		priv->rx_coal_frames[chan] = STMMAC_RX_FRAMES;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_set_rings_length(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_channels_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_channels_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	/* set TX ring length */
 | 
						|
	for (chan = 0; chan < tx_channels_count; chan++)
 | 
						|
		stmmac_set_tx_ring_len(priv, priv->ioaddr,
 | 
						|
				       (priv->dma_conf.dma_tx_size - 1), chan);
 | 
						|
 | 
						|
	/* set RX ring length */
 | 
						|
	for (chan = 0; chan < rx_channels_count; chan++)
 | 
						|
		stmmac_set_rx_ring_len(priv, priv->ioaddr,
 | 
						|
				       (priv->dma_conf.dma_rx_size - 1), chan);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_set_tx_queue_weight - Set TX queue weight
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for setting TX queues weight
 | 
						|
 */
 | 
						|
static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_queues_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 weight;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_queues_count; queue++) {
 | 
						|
		weight = priv->plat->tx_queues_cfg[queue].weight;
 | 
						|
		stmmac_set_mtl_tx_queue_weight(priv, priv->hw, weight, queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_configure_cbs - Configure CBS in TX queue
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for configuring CBS in AVB TX queues
 | 
						|
 */
 | 
						|
static void stmmac_configure_cbs(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_queues_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 mode_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	/* queue 0 is reserved for legacy traffic */
 | 
						|
	for (queue = 1; queue < tx_queues_count; queue++) {
 | 
						|
		mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
 | 
						|
		if (mode_to_use == MTL_QUEUE_DCB)
 | 
						|
			continue;
 | 
						|
 | 
						|
		stmmac_config_cbs(priv, priv->hw,
 | 
						|
				priv->plat->tx_queues_cfg[queue].send_slope,
 | 
						|
				priv->plat->tx_queues_cfg[queue].idle_slope,
 | 
						|
				priv->plat->tx_queues_cfg[queue].high_credit,
 | 
						|
				priv->plat->tx_queues_cfg[queue].low_credit,
 | 
						|
				queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for mapping RX queues to RX dma channels
 | 
						|
 */
 | 
						|
static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_queues_count; queue++) {
 | 
						|
		chan = priv->plat->rx_queues_cfg[queue].chan;
 | 
						|
		stmmac_map_mtl_to_dma(priv, priv->hw, queue, chan);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mac_config_rx_queues_prio - Configure RX Queue priority
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for configuring the RX Queue Priority
 | 
						|
 */
 | 
						|
static void stmmac_mac_config_rx_queues_prio(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	u32 prio;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_queues_count; queue++) {
 | 
						|
		if (!priv->plat->rx_queues_cfg[queue].use_prio)
 | 
						|
			continue;
 | 
						|
 | 
						|
		prio = priv->plat->rx_queues_cfg[queue].prio;
 | 
						|
		stmmac_rx_queue_prio(priv, priv->hw, prio, queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mac_config_tx_queues_prio - Configure TX Queue priority
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for configuring the TX Queue Priority
 | 
						|
 */
 | 
						|
static void stmmac_mac_config_tx_queues_prio(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 tx_queues_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	u32 prio;
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_queues_count; queue++) {
 | 
						|
		if (!priv->plat->tx_queues_cfg[queue].use_prio)
 | 
						|
			continue;
 | 
						|
 | 
						|
		prio = priv->plat->tx_queues_cfg[queue].prio;
 | 
						|
		stmmac_tx_queue_prio(priv, priv->hw, prio, queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mac_config_rx_queues_routing - Configure RX Queue Routing
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for configuring the RX queue routing
 | 
						|
 */
 | 
						|
static void stmmac_mac_config_rx_queues_routing(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
	u8 packet;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_queues_count; queue++) {
 | 
						|
		/* no specific packet type routing specified for the queue */
 | 
						|
		if (priv->plat->rx_queues_cfg[queue].pkt_route == 0x0)
 | 
						|
			continue;
 | 
						|
 | 
						|
		packet = priv->plat->rx_queues_cfg[queue].pkt_route;
 | 
						|
		stmmac_rx_queue_routing(priv, priv->hw, packet, queue);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_mac_config_rss(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	if (!priv->dma_cap.rssen || !priv->plat->rss_en) {
 | 
						|
		priv->rss.enable = false;
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->dev->features & NETIF_F_RXHASH)
 | 
						|
		priv->rss.enable = true;
 | 
						|
	else
 | 
						|
		priv->rss.enable = false;
 | 
						|
 | 
						|
	stmmac_rss_configure(priv, priv->hw, &priv->rss,
 | 
						|
			     priv->plat->rx_queues_to_use);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_mtl_configuration - Configure MTL
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: It is used for configurring MTL
 | 
						|
 */
 | 
						|
static void stmmac_mtl_configuration(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_queues_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_queues_count = priv->plat->tx_queues_to_use;
 | 
						|
 | 
						|
	if (tx_queues_count > 1)
 | 
						|
		stmmac_set_tx_queue_weight(priv);
 | 
						|
 | 
						|
	/* Configure MTL RX algorithms */
 | 
						|
	if (rx_queues_count > 1)
 | 
						|
		stmmac_prog_mtl_rx_algorithms(priv, priv->hw,
 | 
						|
				priv->plat->rx_sched_algorithm);
 | 
						|
 | 
						|
	/* Configure MTL TX algorithms */
 | 
						|
	if (tx_queues_count > 1)
 | 
						|
		stmmac_prog_mtl_tx_algorithms(priv, priv->hw,
 | 
						|
				priv->plat->tx_sched_algorithm);
 | 
						|
 | 
						|
	/* Configure CBS in AVB TX queues */
 | 
						|
	if (tx_queues_count > 1)
 | 
						|
		stmmac_configure_cbs(priv);
 | 
						|
 | 
						|
	/* Map RX MTL to DMA channels */
 | 
						|
	stmmac_rx_queue_dma_chan_map(priv);
 | 
						|
 | 
						|
	/* Enable MAC RX Queues */
 | 
						|
	stmmac_mac_enable_rx_queues(priv);
 | 
						|
 | 
						|
	/* Set RX priorities */
 | 
						|
	if (rx_queues_count > 1)
 | 
						|
		stmmac_mac_config_rx_queues_prio(priv);
 | 
						|
 | 
						|
	/* Set TX priorities */
 | 
						|
	if (tx_queues_count > 1)
 | 
						|
		stmmac_mac_config_tx_queues_prio(priv);
 | 
						|
 | 
						|
	/* Set RX routing */
 | 
						|
	if (rx_queues_count > 1)
 | 
						|
		stmmac_mac_config_rx_queues_routing(priv);
 | 
						|
 | 
						|
	/* Receive Side Scaling */
 | 
						|
	if (rx_queues_count > 1)
 | 
						|
		stmmac_mac_config_rss(priv);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_safety_feat_configuration(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	if (priv->dma_cap.asp) {
 | 
						|
		netdev_info(priv->dev, "Enabling Safety Features\n");
 | 
						|
		stmmac_safety_feat_config(priv, priv->ioaddr, priv->dma_cap.asp,
 | 
						|
					  priv->plat->safety_feat_cfg);
 | 
						|
	} else {
 | 
						|
		netdev_info(priv->dev, "No Safety Features support found\n");
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	char *name;
 | 
						|
 | 
						|
	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
 | 
						|
	clear_bit(__FPE_REMOVING,  &priv->fpe_task_state);
 | 
						|
 | 
						|
	name = priv->wq_name;
 | 
						|
	sprintf(name, "%s-fpe", priv->dev->name);
 | 
						|
 | 
						|
	priv->fpe_wq = create_singlethread_workqueue(name);
 | 
						|
	if (!priv->fpe_wq) {
 | 
						|
		netdev_err(priv->dev, "%s: Failed to create workqueue\n", name);
 | 
						|
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
	netdev_info(priv->dev, "FPE workqueue start");
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_hw_setup - setup mac in a usable state.
 | 
						|
 *  @dev : pointer to the device structure.
 | 
						|
 *  @ptp_register: register PTP if set
 | 
						|
 *  Description:
 | 
						|
 *  this is the main function to setup the HW in a usable state because the
 | 
						|
 *  dma engine is reset, the core registers are configured (e.g. AXI,
 | 
						|
 *  Checksum features, timers). The DMA is ready to start receiving and
 | 
						|
 *  transmitting.
 | 
						|
 *  Return value:
 | 
						|
 *  0 on success and an appropriate (-)ve integer as defined in errno.h
 | 
						|
 *  file on failure.
 | 
						|
 */
 | 
						|
static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 rx_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	bool sph_en;
 | 
						|
	u32 chan;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* DMA initialization and SW reset */
 | 
						|
	ret = stmmac_init_dma_engine(priv);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(priv->dev, "%s: DMA engine initialization failed\n",
 | 
						|
			   __func__);
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Copy the MAC addr into the HW  */
 | 
						|
	stmmac_set_umac_addr(priv, priv->hw, dev->dev_addr, 0);
 | 
						|
 | 
						|
	/* PS and related bits will be programmed according to the speed */
 | 
						|
	if (priv->hw->pcs) {
 | 
						|
		int speed = priv->plat->mac_port_sel_speed;
 | 
						|
 | 
						|
		if ((speed == SPEED_10) || (speed == SPEED_100) ||
 | 
						|
		    (speed == SPEED_1000)) {
 | 
						|
			priv->hw->ps = speed;
 | 
						|
		} else {
 | 
						|
			dev_warn(priv->device, "invalid port speed\n");
 | 
						|
			priv->hw->ps = 0;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Initialize the MAC Core */
 | 
						|
	stmmac_core_init(priv, priv->hw, dev);
 | 
						|
 | 
						|
	/* Initialize MTL*/
 | 
						|
	stmmac_mtl_configuration(priv);
 | 
						|
 | 
						|
	/* Initialize Safety Features */
 | 
						|
	stmmac_safety_feat_configuration(priv);
 | 
						|
 | 
						|
	ret = stmmac_rx_ipc(priv, priv->hw);
 | 
						|
	if (!ret) {
 | 
						|
		netdev_warn(priv->dev, "RX IPC Checksum Offload disabled\n");
 | 
						|
		priv->plat->rx_coe = STMMAC_RX_COE_NONE;
 | 
						|
		priv->hw->rx_csum = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Enable the MAC Rx/Tx */
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, true);
 | 
						|
 | 
						|
	/* Set the HW DMA mode and the COE */
 | 
						|
	stmmac_dma_operation_mode(priv);
 | 
						|
 | 
						|
	stmmac_mmc_setup(priv);
 | 
						|
 | 
						|
	if (ptp_register) {
 | 
						|
		ret = clk_prepare_enable(priv->plat->clk_ptp_ref);
 | 
						|
		if (ret < 0)
 | 
						|
			netdev_warn(priv->dev,
 | 
						|
				    "failed to enable PTP reference clock: %pe\n",
 | 
						|
				    ERR_PTR(ret));
 | 
						|
	}
 | 
						|
 | 
						|
	ret = stmmac_init_ptp(priv);
 | 
						|
	if (ret == -EOPNOTSUPP)
 | 
						|
		netdev_info(priv->dev, "PTP not supported by HW\n");
 | 
						|
	else if (ret)
 | 
						|
		netdev_warn(priv->dev, "PTP init failed\n");
 | 
						|
	else if (ptp_register)
 | 
						|
		stmmac_ptp_register(priv);
 | 
						|
 | 
						|
	priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
 | 
						|
 | 
						|
	/* Convert the timer from msec to usec */
 | 
						|
	if (!priv->tx_lpi_timer)
 | 
						|
		priv->tx_lpi_timer = eee_timer * 1000;
 | 
						|
 | 
						|
	if (priv->use_riwt) {
 | 
						|
		u32 queue;
 | 
						|
 | 
						|
		for (queue = 0; queue < rx_cnt; queue++) {
 | 
						|
			if (!priv->rx_riwt[queue])
 | 
						|
				priv->rx_riwt[queue] = DEF_DMA_RIWT;
 | 
						|
 | 
						|
			stmmac_rx_watchdog(priv, priv->ioaddr,
 | 
						|
					   priv->rx_riwt[queue], queue);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->hw->pcs)
 | 
						|
		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, priv->hw->ps, 0);
 | 
						|
 | 
						|
	/* set TX and RX rings length */
 | 
						|
	stmmac_set_rings_length(priv);
 | 
						|
 | 
						|
	/* Enable TSO */
 | 
						|
	if (priv->tso) {
 | 
						|
		for (chan = 0; chan < tx_cnt; chan++) {
 | 
						|
			struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
 | 
						|
			/* TSO and TBS cannot co-exist */
 | 
						|
			if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
				continue;
 | 
						|
 | 
						|
			stmmac_enable_tso(priv, priv->ioaddr, 1, chan);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Enable Split Header */
 | 
						|
	sph_en = (priv->hw->rx_csum > 0) && priv->sph;
 | 
						|
	for (chan = 0; chan < rx_cnt; chan++)
 | 
						|
		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
 | 
						|
 | 
						|
 | 
						|
	/* VLAN Tag Insertion */
 | 
						|
	if (priv->dma_cap.vlins)
 | 
						|
		stmmac_enable_vlan(priv, priv->hw, STMMAC_VLAN_INSERT);
 | 
						|
 | 
						|
	/* TBS */
 | 
						|
	for (chan = 0; chan < tx_cnt; chan++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
		int enable = tx_q->tbs & STMMAC_TBS_AVAIL;
 | 
						|
 | 
						|
		stmmac_enable_tbs(priv, priv->ioaddr, enable, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Configure real RX and TX queues */
 | 
						|
	netif_set_real_num_rx_queues(dev, priv->plat->rx_queues_to_use);
 | 
						|
	netif_set_real_num_tx_queues(dev, priv->plat->tx_queues_to_use);
 | 
						|
 | 
						|
	/* Start the ball rolling... */
 | 
						|
	stmmac_start_all_dma(priv);
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel) {
 | 
						|
		stmmac_fpe_start_wq(priv);
 | 
						|
 | 
						|
		if (priv->plat->fpe_cfg->enable)
 | 
						|
			stmmac_fpe_handshake(priv, true);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_hw_teardown(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	clk_disable_unprepare(priv->plat->clk_ptp_ref);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_free_irq(struct net_device *dev,
 | 
						|
			    enum request_irq_err irq_err, int irq_idx)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int j;
 | 
						|
 | 
						|
	switch (irq_err) {
 | 
						|
	case REQ_IRQ_ERR_ALL:
 | 
						|
		irq_idx = priv->plat->tx_queues_to_use;
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_TX:
 | 
						|
		for (j = irq_idx - 1; j >= 0; j--) {
 | 
						|
			if (priv->tx_irq[j] > 0) {
 | 
						|
				irq_set_affinity_hint(priv->tx_irq[j], NULL);
 | 
						|
				free_irq(priv->tx_irq[j], &priv->dma_conf.tx_queue[j]);
 | 
						|
			}
 | 
						|
		}
 | 
						|
		irq_idx = priv->plat->rx_queues_to_use;
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_RX:
 | 
						|
		for (j = irq_idx - 1; j >= 0; j--) {
 | 
						|
			if (priv->rx_irq[j] > 0) {
 | 
						|
				irq_set_affinity_hint(priv->rx_irq[j], NULL);
 | 
						|
				free_irq(priv->rx_irq[j], &priv->dma_conf.rx_queue[j]);
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->sfty_ue_irq > 0 && priv->sfty_ue_irq != dev->irq)
 | 
						|
			free_irq(priv->sfty_ue_irq, dev);
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_SFTY_UE:
 | 
						|
		if (priv->sfty_ce_irq > 0 && priv->sfty_ce_irq != dev->irq)
 | 
						|
			free_irq(priv->sfty_ce_irq, dev);
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_SFTY_CE:
 | 
						|
		if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq)
 | 
						|
			free_irq(priv->lpi_irq, dev);
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_LPI:
 | 
						|
		if (priv->wol_irq > 0 && priv->wol_irq != dev->irq)
 | 
						|
			free_irq(priv->wol_irq, dev);
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_WOL:
 | 
						|
		free_irq(dev->irq, dev);
 | 
						|
		fallthrough;
 | 
						|
	case REQ_IRQ_ERR_MAC:
 | 
						|
	case REQ_IRQ_ERR_NO:
 | 
						|
		/* If MAC IRQ request error, no more IRQ to free */
 | 
						|
		break;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_request_irq_multi_msi(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	enum request_irq_err irq_err;
 | 
						|
	cpumask_t cpu_mask;
 | 
						|
	int irq_idx = 0;
 | 
						|
	char *int_name;
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* For common interrupt */
 | 
						|
	int_name = priv->int_name_mac;
 | 
						|
	sprintf(int_name, "%s:%s", dev->name, "mac");
 | 
						|
	ret = request_irq(dev->irq, stmmac_mac_interrupt,
 | 
						|
			  0, int_name, dev);
 | 
						|
	if (unlikely(ret < 0)) {
 | 
						|
		netdev_err(priv->dev,
 | 
						|
			   "%s: alloc mac MSI %d (error: %d)\n",
 | 
						|
			   __func__, dev->irq, ret);
 | 
						|
		irq_err = REQ_IRQ_ERR_MAC;
 | 
						|
		goto irq_error;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the Wake IRQ in case of another line
 | 
						|
	 * is used for WoL
 | 
						|
	 */
 | 
						|
	priv->wol_irq_disabled = true;
 | 
						|
	if (priv->wol_irq > 0 && priv->wol_irq != dev->irq) {
 | 
						|
		int_name = priv->int_name_wol;
 | 
						|
		sprintf(int_name, "%s:%s", dev->name, "wol");
 | 
						|
		ret = request_irq(priv->wol_irq,
 | 
						|
				  stmmac_mac_interrupt,
 | 
						|
				  0, int_name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc wol MSI %d (error: %d)\n",
 | 
						|
				   __func__, priv->wol_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_WOL;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the LPI IRQ in case of another line
 | 
						|
	 * is used for LPI
 | 
						|
	 */
 | 
						|
	if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq) {
 | 
						|
		int_name = priv->int_name_lpi;
 | 
						|
		sprintf(int_name, "%s:%s", dev->name, "lpi");
 | 
						|
		ret = request_irq(priv->lpi_irq,
 | 
						|
				  stmmac_mac_interrupt,
 | 
						|
				  0, int_name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc lpi MSI %d (error: %d)\n",
 | 
						|
				   __func__, priv->lpi_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_LPI;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the Safety Feature Correctible Error line in
 | 
						|
	 * case of another line is used
 | 
						|
	 */
 | 
						|
	if (priv->sfty_ce_irq > 0 && priv->sfty_ce_irq != dev->irq) {
 | 
						|
		int_name = priv->int_name_sfty_ce;
 | 
						|
		sprintf(int_name, "%s:%s", dev->name, "safety-ce");
 | 
						|
		ret = request_irq(priv->sfty_ce_irq,
 | 
						|
				  stmmac_safety_interrupt,
 | 
						|
				  0, int_name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc sfty ce MSI %d (error: %d)\n",
 | 
						|
				   __func__, priv->sfty_ce_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_SFTY_CE;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the Safety Feature Uncorrectible Error line in
 | 
						|
	 * case of another line is used
 | 
						|
	 */
 | 
						|
	if (priv->sfty_ue_irq > 0 && priv->sfty_ue_irq != dev->irq) {
 | 
						|
		int_name = priv->int_name_sfty_ue;
 | 
						|
		sprintf(int_name, "%s:%s", dev->name, "safety-ue");
 | 
						|
		ret = request_irq(priv->sfty_ue_irq,
 | 
						|
				  stmmac_safety_interrupt,
 | 
						|
				  0, int_name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc sfty ue MSI %d (error: %d)\n",
 | 
						|
				   __func__, priv->sfty_ue_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_SFTY_UE;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request Rx MSI irq */
 | 
						|
	for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
 | 
						|
		if (i >= MTL_MAX_RX_QUEUES)
 | 
						|
			break;
 | 
						|
		if (priv->rx_irq[i] == 0)
 | 
						|
			continue;
 | 
						|
 | 
						|
		int_name = priv->int_name_rx_irq[i];
 | 
						|
		sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
 | 
						|
		ret = request_irq(priv->rx_irq[i],
 | 
						|
				  stmmac_msi_intr_rx,
 | 
						|
				  0, int_name, &priv->dma_conf.rx_queue[i]);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc rx-%d  MSI %d (error: %d)\n",
 | 
						|
				   __func__, i, priv->rx_irq[i], ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_RX;
 | 
						|
			irq_idx = i;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
		cpumask_clear(&cpu_mask);
 | 
						|
		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
 | 
						|
		irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request Tx MSI irq */
 | 
						|
	for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
 | 
						|
		if (i >= MTL_MAX_TX_QUEUES)
 | 
						|
			break;
 | 
						|
		if (priv->tx_irq[i] == 0)
 | 
						|
			continue;
 | 
						|
 | 
						|
		int_name = priv->int_name_tx_irq[i];
 | 
						|
		sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
 | 
						|
		ret = request_irq(priv->tx_irq[i],
 | 
						|
				  stmmac_msi_intr_tx,
 | 
						|
				  0, int_name, &priv->dma_conf.tx_queue[i]);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: alloc tx-%d  MSI %d (error: %d)\n",
 | 
						|
				   __func__, i, priv->tx_irq[i], ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_TX;
 | 
						|
			irq_idx = i;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
		cpumask_clear(&cpu_mask);
 | 
						|
		cpumask_set_cpu(i % num_online_cpus(), &cpu_mask);
 | 
						|
		irq_set_affinity_hint(priv->tx_irq[i], &cpu_mask);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
irq_error:
 | 
						|
	stmmac_free_irq(dev, irq_err, irq_idx);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_request_irq_single(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	enum request_irq_err irq_err;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = request_irq(dev->irq, stmmac_interrupt,
 | 
						|
			  IRQF_SHARED, dev->name, dev);
 | 
						|
	if (unlikely(ret < 0)) {
 | 
						|
		netdev_err(priv->dev,
 | 
						|
			   "%s: ERROR: allocating the IRQ %d (error: %d)\n",
 | 
						|
			   __func__, dev->irq, ret);
 | 
						|
		irq_err = REQ_IRQ_ERR_MAC;
 | 
						|
		goto irq_error;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the Wake IRQ in case of another line
 | 
						|
	 * is used for WoL
 | 
						|
	 */
 | 
						|
	if (priv->wol_irq > 0 && priv->wol_irq != dev->irq) {
 | 
						|
		ret = request_irq(priv->wol_irq, stmmac_interrupt,
 | 
						|
				  IRQF_SHARED, dev->name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: ERROR: allocating the WoL IRQ %d (%d)\n",
 | 
						|
				   __func__, priv->wol_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_WOL;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Request the IRQ lines */
 | 
						|
	if (priv->lpi_irq > 0 && priv->lpi_irq != dev->irq) {
 | 
						|
		ret = request_irq(priv->lpi_irq, stmmac_interrupt,
 | 
						|
				  IRQF_SHARED, dev->name, dev);
 | 
						|
		if (unlikely(ret < 0)) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: ERROR: allocating the LPI IRQ %d (%d)\n",
 | 
						|
				   __func__, priv->lpi_irq, ret);
 | 
						|
			irq_err = REQ_IRQ_ERR_LPI;
 | 
						|
			goto irq_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
irq_error:
 | 
						|
	stmmac_free_irq(dev, irq_err, 0);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_request_irq(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* Request the IRQ lines */
 | 
						|
	if (priv->plat->multi_msi_en)
 | 
						|
		ret = stmmac_request_irq_multi_msi(dev);
 | 
						|
	else
 | 
						|
		ret = stmmac_request_irq_single(dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_setup_dma_desc - Generate a dma_conf and allocate DMA queue
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  @mtu: MTU to setup the dma queue and buf with
 | 
						|
 *  Description: Allocate and generate a dma_conf based on the provided MTU.
 | 
						|
 *  Allocate the Tx/Rx DMA queue and init them.
 | 
						|
 *  Return value:
 | 
						|
 *  the dma_conf allocated struct on success and an appropriate ERR_PTR on failure.
 | 
						|
 */
 | 
						|
static struct stmmac_dma_conf *
 | 
						|
stmmac_setup_dma_desc(struct stmmac_priv *priv, unsigned int mtu)
 | 
						|
{
 | 
						|
	struct stmmac_dma_conf *dma_conf;
 | 
						|
	int chan, bfsize, ret;
 | 
						|
 | 
						|
	dma_conf = kzalloc(sizeof(*dma_conf), GFP_KERNEL);
 | 
						|
	if (!dma_conf) {
 | 
						|
		netdev_err(priv->dev, "%s: DMA conf allocation failed\n",
 | 
						|
			   __func__);
 | 
						|
		return ERR_PTR(-ENOMEM);
 | 
						|
	}
 | 
						|
 | 
						|
	bfsize = stmmac_set_16kib_bfsize(priv, mtu);
 | 
						|
	if (bfsize < 0)
 | 
						|
		bfsize = 0;
 | 
						|
 | 
						|
	if (bfsize < BUF_SIZE_16KiB)
 | 
						|
		bfsize = stmmac_set_bfsize(mtu, 0);
 | 
						|
 | 
						|
	dma_conf->dma_buf_sz = bfsize;
 | 
						|
	/* Chose the tx/rx size from the already defined one in the
 | 
						|
	 * priv struct. (if defined)
 | 
						|
	 */
 | 
						|
	dma_conf->dma_tx_size = priv->dma_conf.dma_tx_size;
 | 
						|
	dma_conf->dma_rx_size = priv->dma_conf.dma_rx_size;
 | 
						|
 | 
						|
	if (!dma_conf->dma_tx_size)
 | 
						|
		dma_conf->dma_tx_size = dma_conf->dma_tx_size ? priv->plat->dma_tx_size :
 | 
						|
					DMA_DEFAULT_TX_SIZE;
 | 
						|
 | 
						|
	if (!dma_conf->dma_rx_size)
 | 
						|
		dma_conf->dma_rx_size = dma_conf->dma_rx_size ? priv->plat->dma_rx_size :
 | 
						|
					DMA_DEFAULT_RX_SIZE;
 | 
						|
 | 
						|
	/* Earlier check for TBS */
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &dma_conf->tx_queue[chan];
 | 
						|
		int tbs_en = priv->plat->tx_queues_cfg[chan].tbs_en;
 | 
						|
 | 
						|
		/* Setup per-TXQ tbs flag before TX descriptor alloc */
 | 
						|
		tx_q->tbs |= tbs_en ? STMMAC_TBS_AVAIL : 0;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = alloc_dma_desc_resources(priv, dma_conf);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(priv->dev, "%s: DMA descriptors allocation failed\n",
 | 
						|
			   __func__);
 | 
						|
		goto alloc_error;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = init_dma_desc_rings(priv->dev, dma_conf, GFP_KERNEL);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(priv->dev, "%s: DMA descriptors initialization failed\n",
 | 
						|
			   __func__);
 | 
						|
		goto init_error;
 | 
						|
	}
 | 
						|
 | 
						|
	return dma_conf;
 | 
						|
 | 
						|
init_error:
 | 
						|
	free_dma_desc_resources(priv, dma_conf);
 | 
						|
alloc_error:
 | 
						|
	kfree(dma_conf);
 | 
						|
	return ERR_PTR(ret);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  __stmmac_open - open entry point of the driver
 | 
						|
 *  @dev : pointer to the device structure.
 | 
						|
 *  @dma_conf :  structure to take the dma data
 | 
						|
 *  Description:
 | 
						|
 *  This function is the open entry point of the driver.
 | 
						|
 *  Return value:
 | 
						|
 *  0 on success and an appropriate (-)ve integer as defined in errno.h
 | 
						|
 *  file on failure.
 | 
						|
 */
 | 
						|
static int __stmmac_open(struct net_device *dev,
 | 
						|
			 struct stmmac_dma_conf *dma_conf)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int mode = priv->plat->phy_interface;
 | 
						|
	u32 chan;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = pm_runtime_resume_and_get(priv->device);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 | 
						|
	    priv->hw->pcs != STMMAC_PCS_RTBI &&
 | 
						|
	    (!priv->hw->xpcs ||
 | 
						|
	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
 | 
						|
		ret = stmmac_init_phy(dev);
 | 
						|
		if (ret) {
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: Cannot attach to PHY (error: %d)\n",
 | 
						|
				   __func__, ret);
 | 
						|
			goto init_phy_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* Extra statistics */
 | 
						|
	memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
 | 
						|
	priv->xstats.threshold = tc;
 | 
						|
 | 
						|
	priv->rx_copybreak = STMMAC_RX_COPYBREAK;
 | 
						|
 | 
						|
	buf_sz = dma_conf->dma_buf_sz;
 | 
						|
	for (int i = 0; i < MTL_MAX_TX_QUEUES; i++)
 | 
						|
		if (priv->dma_conf.tx_queue[i].tbs & STMMAC_TBS_EN)
 | 
						|
			dma_conf->tx_queue[i].tbs = priv->dma_conf.tx_queue[i].tbs;
 | 
						|
	memcpy(&priv->dma_conf, dma_conf, sizeof(*dma_conf));
 | 
						|
 | 
						|
	stmmac_reset_queues_param(priv);
 | 
						|
 | 
						|
	if (priv->plat->serdes_powerup) {
 | 
						|
		ret = priv->plat->serdes_powerup(dev, priv->plat->bsp_priv);
 | 
						|
		if (ret < 0) {
 | 
						|
			netdev_err(priv->dev, "%s: Serdes powerup failed\n",
 | 
						|
				   __func__);
 | 
						|
			goto init_error;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ret = stmmac_hw_setup(dev, true);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(priv->dev, "%s: Hw setup failed\n", __func__);
 | 
						|
		goto init_error;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_init_coalesce(priv);
 | 
						|
 | 
						|
	phylink_start(priv->phylink);
 | 
						|
	/* We may have called phylink_speed_down before */
 | 
						|
	phylink_speed_up(priv->phylink);
 | 
						|
 | 
						|
	ret = stmmac_request_irq(dev);
 | 
						|
	if (ret)
 | 
						|
		goto irq_error;
 | 
						|
 | 
						|
	stmmac_enable_all_queues(priv);
 | 
						|
	netif_tx_start_all_queues(priv->dev);
 | 
						|
	stmmac_enable_all_dma_irq(priv);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
irq_error:
 | 
						|
	phylink_stop(priv->phylink);
 | 
						|
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 | 
						|
		hrtimer_cancel(&priv->dma_conf.tx_queue[chan].txtimer);
 | 
						|
 | 
						|
	stmmac_hw_teardown(dev);
 | 
						|
init_error:
 | 
						|
	phylink_disconnect_phy(priv->phylink);
 | 
						|
init_phy_error:
 | 
						|
	pm_runtime_put(priv->device);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_open(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	struct stmmac_dma_conf *dma_conf;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	dma_conf = stmmac_setup_dma_desc(priv, dev->mtu);
 | 
						|
	if (IS_ERR(dma_conf))
 | 
						|
		return PTR_ERR(dma_conf);
 | 
						|
 | 
						|
	ret = __stmmac_open(dev, dma_conf);
 | 
						|
	if (ret)
 | 
						|
		free_dma_desc_resources(priv, dma_conf);
 | 
						|
 | 
						|
	kfree(dma_conf);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_fpe_stop_wq(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	set_bit(__FPE_REMOVING, &priv->fpe_task_state);
 | 
						|
 | 
						|
	if (priv->fpe_wq) {
 | 
						|
		destroy_workqueue(priv->fpe_wq);
 | 
						|
		priv->fpe_wq = NULL;
 | 
						|
	}
 | 
						|
 | 
						|
	netdev_info(priv->dev, "FPE workqueue stop");
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_release - close entry point of the driver
 | 
						|
 *  @dev : device pointer.
 | 
						|
 *  Description:
 | 
						|
 *  This is the stop entry point of the driver.
 | 
						|
 */
 | 
						|
static int stmmac_release(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	if (device_may_wakeup(priv->device))
 | 
						|
		phylink_speed_down(priv->phylink, false);
 | 
						|
	/* Stop and disconnect the PHY */
 | 
						|
	phylink_stop(priv->phylink);
 | 
						|
	phylink_disconnect_phy(priv->phylink);
 | 
						|
 | 
						|
	if (priv->plat->integrated_phy_power)
 | 
						|
		priv->plat->integrated_phy_power(priv->plat->bsp_priv, false);
 | 
						|
 | 
						|
	stmmac_disable_all_queues(priv);
 | 
						|
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 | 
						|
		hrtimer_cancel(&priv->dma_conf.tx_queue[chan].txtimer);
 | 
						|
 | 
						|
	netif_tx_disable(dev);
 | 
						|
 | 
						|
	/* Free the IRQ lines */
 | 
						|
	stmmac_free_irq(dev, REQ_IRQ_ERR_ALL, 0);
 | 
						|
 | 
						|
	if (priv->eee_enabled) {
 | 
						|
		priv->tx_path_in_lpi_mode = false;
 | 
						|
		del_timer_sync(&priv->eee_ctrl_timer);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Stop TX/RX DMA and clear the descriptors */
 | 
						|
	stmmac_stop_all_dma(priv);
 | 
						|
 | 
						|
	/* Release and free the Rx/Tx resources */
 | 
						|
	free_dma_desc_resources(priv, &priv->dma_conf);
 | 
						|
 | 
						|
	/* Disable the MAC Rx/Tx */
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, false);
 | 
						|
 | 
						|
	/* Powerdown Serdes if there is */
 | 
						|
	if (priv->plat->serdes_powerdown)
 | 
						|
		priv->plat->serdes_powerdown(dev, priv->plat->bsp_priv);
 | 
						|
 | 
						|
	netif_carrier_off(dev);
 | 
						|
 | 
						|
	stmmac_release_ptp(priv);
 | 
						|
 | 
						|
	pm_runtime_put(priv->device);
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel)
 | 
						|
		stmmac_fpe_stop_wq(priv);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static bool stmmac_vlan_insert(struct stmmac_priv *priv, struct sk_buff *skb,
 | 
						|
			       struct stmmac_tx_queue *tx_q)
 | 
						|
{
 | 
						|
	u16 tag = 0x0, inner_tag = 0x0;
 | 
						|
	u32 inner_type = 0x0;
 | 
						|
	struct dma_desc *p;
 | 
						|
 | 
						|
	if (!priv->dma_cap.vlins)
 | 
						|
		return false;
 | 
						|
	if (!skb_vlan_tag_present(skb))
 | 
						|
		return false;
 | 
						|
	if (skb->vlan_proto == htons(ETH_P_8021AD)) {
 | 
						|
		inner_tag = skb_vlan_tag_get(skb);
 | 
						|
		inner_type = STMMAC_VLAN_INSERT;
 | 
						|
	}
 | 
						|
 | 
						|
	tag = skb_vlan_tag_get(skb);
 | 
						|
 | 
						|
	if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		p = &tx_q->dma_entx[tx_q->cur_tx].basic;
 | 
						|
	else
 | 
						|
		p = &tx_q->dma_tx[tx_q->cur_tx];
 | 
						|
 | 
						|
	if (stmmac_set_desc_vlan_tag(priv, p, tag, inner_tag, inner_type))
 | 
						|
		return false;
 | 
						|
 | 
						|
	stmmac_set_tx_owner(priv, p);
 | 
						|
	tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_conf.dma_tx_size);
 | 
						|
	return true;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_tso_allocator - close entry point of the driver
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  @des: buffer start address
 | 
						|
 *  @total_len: total length to fill in descriptors
 | 
						|
 *  @last_segment: condition for the last descriptor
 | 
						|
 *  @queue: TX queue index
 | 
						|
 *  Description:
 | 
						|
 *  This function fills descriptor and request new descriptors according to
 | 
						|
 *  buffer length to fill
 | 
						|
 */
 | 
						|
static void stmmac_tso_allocator(struct stmmac_priv *priv, dma_addr_t des,
 | 
						|
				 int total_len, bool last_segment, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	struct dma_desc *desc;
 | 
						|
	u32 buff_size;
 | 
						|
	int tmp_len;
 | 
						|
 | 
						|
	tmp_len = total_len;
 | 
						|
 | 
						|
	while (tmp_len > 0) {
 | 
						|
		dma_addr_t curr_addr;
 | 
						|
 | 
						|
		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx,
 | 
						|
						priv->dma_conf.dma_tx_size);
 | 
						|
		WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
 | 
						|
 | 
						|
		if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
 | 
						|
		else
 | 
						|
			desc = &tx_q->dma_tx[tx_q->cur_tx];
 | 
						|
 | 
						|
		curr_addr = des + (total_len - tmp_len);
 | 
						|
		if (priv->dma_cap.addr64 <= 32)
 | 
						|
			desc->des0 = cpu_to_le32(curr_addr);
 | 
						|
		else
 | 
						|
			stmmac_set_desc_addr(priv, desc, curr_addr);
 | 
						|
 | 
						|
		buff_size = tmp_len >= TSO_MAX_BUFF_SIZE ?
 | 
						|
			    TSO_MAX_BUFF_SIZE : tmp_len;
 | 
						|
 | 
						|
		stmmac_prepare_tso_tx_desc(priv, desc, 0, buff_size,
 | 
						|
				0, 1,
 | 
						|
				(last_segment) && (tmp_len <= TSO_MAX_BUFF_SIZE),
 | 
						|
				0, 0);
 | 
						|
 | 
						|
		tmp_len -= TSO_MAX_BUFF_SIZE;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	int desc_size;
 | 
						|
 | 
						|
	if (likely(priv->extend_desc))
 | 
						|
		desc_size = sizeof(struct dma_extended_desc);
 | 
						|
	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		desc_size = sizeof(struct dma_edesc);
 | 
						|
	else
 | 
						|
		desc_size = sizeof(struct dma_desc);
 | 
						|
 | 
						|
	/* The own bit must be the latest setting done when prepare the
 | 
						|
	 * descriptor and then barrier is needed to make sure that
 | 
						|
	 * all is coherent before granting the DMA engine.
 | 
						|
	 */
 | 
						|
	wmb();
 | 
						|
 | 
						|
	tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * desc_size);
 | 
						|
	stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_tso_xmit - Tx entry point of the driver for oversized frames (TSO)
 | 
						|
 *  @skb : the socket buffer
 | 
						|
 *  @dev : device pointer
 | 
						|
 *  Description: this is the transmit function that is called on TSO frames
 | 
						|
 *  (support available on GMAC4 and newer chips).
 | 
						|
 *  Diagram below show the ring programming in case of TSO frames:
 | 
						|
 *
 | 
						|
 *  First Descriptor
 | 
						|
 *   --------
 | 
						|
 *   | DES0 |---> buffer1 = L2/L3/L4 header
 | 
						|
 *   | DES1 |---> TCP Payload (can continue on next descr...)
 | 
						|
 *   | DES2 |---> buffer 1 and 2 len
 | 
						|
 *   | DES3 |---> must set TSE, TCP hdr len-> [22:19]. TCP payload len [17:0]
 | 
						|
 *   --------
 | 
						|
 *	|
 | 
						|
 *     ...
 | 
						|
 *	|
 | 
						|
 *   --------
 | 
						|
 *   | DES0 | --| Split TCP Payload on Buffers 1 and 2
 | 
						|
 *   | DES1 | --|
 | 
						|
 *   | DES2 | --> buffer 1 and 2 len
 | 
						|
 *   | DES3 |
 | 
						|
 *   --------
 | 
						|
 *
 | 
						|
 * mss is fixed when enable tso, so w/o programming the TDES3 ctx field.
 | 
						|
 */
 | 
						|
static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
 | 
						|
{
 | 
						|
	struct dma_desc *desc, *first, *mss_desc = NULL;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int nfrags = skb_shinfo(skb)->nr_frags;
 | 
						|
	u32 queue = skb_get_queue_mapping(skb);
 | 
						|
	unsigned int first_entry, tx_packets;
 | 
						|
	int tmp_pay_len = 0, first_tx;
 | 
						|
	struct stmmac_tx_queue *tx_q;
 | 
						|
	bool has_vlan, set_ic;
 | 
						|
	u8 proto_hdr_len, hdr;
 | 
						|
	u32 pay_len, mss;
 | 
						|
	dma_addr_t des;
 | 
						|
	int i;
 | 
						|
 | 
						|
	tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	first_tx = tx_q->cur_tx;
 | 
						|
 | 
						|
	/* Compute header lengths */
 | 
						|
	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
 | 
						|
		proto_hdr_len = skb_transport_offset(skb) + sizeof(struct udphdr);
 | 
						|
		hdr = sizeof(struct udphdr);
 | 
						|
	} else {
 | 
						|
		proto_hdr_len = skb_tcp_all_headers(skb);
 | 
						|
		hdr = tcp_hdrlen(skb);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Desc availability based on threshold should be enough safe */
 | 
						|
	if (unlikely(stmmac_tx_avail(priv, queue) <
 | 
						|
		(((skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1)))) {
 | 
						|
		if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
 | 
						|
			netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
 | 
						|
								queue));
 | 
						|
			/* This is a hard error, log it. */
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: Tx Ring full when queue awake\n",
 | 
						|
				   __func__);
 | 
						|
		}
 | 
						|
		return NETDEV_TX_BUSY;
 | 
						|
	}
 | 
						|
 | 
						|
	pay_len = skb_headlen(skb) - proto_hdr_len; /* no frags */
 | 
						|
 | 
						|
	mss = skb_shinfo(skb)->gso_size;
 | 
						|
 | 
						|
	/* set new MSS value if needed */
 | 
						|
	if (mss != tx_q->mss) {
 | 
						|
		if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			mss_desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
 | 
						|
		else
 | 
						|
			mss_desc = &tx_q->dma_tx[tx_q->cur_tx];
 | 
						|
 | 
						|
		stmmac_set_mss(priv, mss_desc, mss);
 | 
						|
		tx_q->mss = mss;
 | 
						|
		tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx,
 | 
						|
						priv->dma_conf.dma_tx_size);
 | 
						|
		WARN_ON(tx_q->tx_skbuff[tx_q->cur_tx]);
 | 
						|
	}
 | 
						|
 | 
						|
	if (netif_msg_tx_queued(priv)) {
 | 
						|
		pr_info("%s: hdrlen %d, hdr_len %d, pay_len %d, mss %d\n",
 | 
						|
			__func__, hdr, proto_hdr_len, pay_len, mss);
 | 
						|
		pr_info("\tskb->len %d, skb->data_len %d\n", skb->len,
 | 
						|
			skb->data_len);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check if VLAN can be inserted by HW */
 | 
						|
	has_vlan = stmmac_vlan_insert(priv, skb, tx_q);
 | 
						|
 | 
						|
	first_entry = tx_q->cur_tx;
 | 
						|
	WARN_ON(tx_q->tx_skbuff[first_entry]);
 | 
						|
 | 
						|
	if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		desc = &tx_q->dma_entx[first_entry].basic;
 | 
						|
	else
 | 
						|
		desc = &tx_q->dma_tx[first_entry];
 | 
						|
	first = desc;
 | 
						|
 | 
						|
	if (has_vlan)
 | 
						|
		stmmac_set_desc_vlan(priv, first, STMMAC_VLAN_INSERT);
 | 
						|
 | 
						|
	/* first descriptor: fill Headers on Buf1 */
 | 
						|
	des = dma_map_single(priv->device, skb->data, skb_headlen(skb),
 | 
						|
			     DMA_TO_DEVICE);
 | 
						|
	if (dma_mapping_error(priv->device, des))
 | 
						|
		goto dma_map_err;
 | 
						|
 | 
						|
	tx_q->tx_skbuff_dma[first_entry].buf = des;
 | 
						|
	tx_q->tx_skbuff_dma[first_entry].len = skb_headlen(skb);
 | 
						|
	tx_q->tx_skbuff_dma[first_entry].map_as_page = false;
 | 
						|
	tx_q->tx_skbuff_dma[first_entry].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
 | 
						|
	if (priv->dma_cap.addr64 <= 32) {
 | 
						|
		first->des0 = cpu_to_le32(des);
 | 
						|
 | 
						|
		/* Fill start of payload in buff2 of first descriptor */
 | 
						|
		if (pay_len)
 | 
						|
			first->des1 = cpu_to_le32(des + proto_hdr_len);
 | 
						|
 | 
						|
		/* If needed take extra descriptors to fill the remaining payload */
 | 
						|
		tmp_pay_len = pay_len - TSO_MAX_BUFF_SIZE;
 | 
						|
	} else {
 | 
						|
		stmmac_set_desc_addr(priv, first, des);
 | 
						|
		tmp_pay_len = pay_len;
 | 
						|
		des += proto_hdr_len;
 | 
						|
		pay_len = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
 | 
						|
 | 
						|
	/* Prepare fragments */
 | 
						|
	for (i = 0; i < nfrags; i++) {
 | 
						|
		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 | 
						|
 | 
						|
		des = skb_frag_dma_map(priv->device, frag, 0,
 | 
						|
				       skb_frag_size(frag),
 | 
						|
				       DMA_TO_DEVICE);
 | 
						|
		if (dma_mapping_error(priv->device, des))
 | 
						|
			goto dma_map_err;
 | 
						|
 | 
						|
		stmmac_tso_allocator(priv, des, skb_frag_size(frag),
 | 
						|
				     (i == nfrags - 1), queue);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[tx_q->cur_tx].buf = des;
 | 
						|
		tx_q->tx_skbuff_dma[tx_q->cur_tx].len = skb_frag_size(frag);
 | 
						|
		tx_q->tx_skbuff_dma[tx_q->cur_tx].map_as_page = true;
 | 
						|
		tx_q->tx_skbuff_dma[tx_q->cur_tx].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
	}
 | 
						|
 | 
						|
	tx_q->tx_skbuff_dma[tx_q->cur_tx].last_segment = true;
 | 
						|
 | 
						|
	/* Only the last descriptor gets to point to the skb. */
 | 
						|
	tx_q->tx_skbuff[tx_q->cur_tx] = skb;
 | 
						|
	tx_q->tx_skbuff_dma[tx_q->cur_tx].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
 | 
						|
	/* Manage tx mitigation */
 | 
						|
	tx_packets = (tx_q->cur_tx + 1) - first_tx;
 | 
						|
	tx_q->tx_count_frames += tx_packets;
 | 
						|
 | 
						|
	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
 | 
						|
		set_ic = true;
 | 
						|
	else if (!priv->tx_coal_frames[queue])
 | 
						|
		set_ic = false;
 | 
						|
	else if (tx_packets > priv->tx_coal_frames[queue])
 | 
						|
		set_ic = true;
 | 
						|
	else if ((tx_q->tx_count_frames %
 | 
						|
		  priv->tx_coal_frames[queue]) < tx_packets)
 | 
						|
		set_ic = true;
 | 
						|
	else
 | 
						|
		set_ic = false;
 | 
						|
 | 
						|
	if (set_ic) {
 | 
						|
		if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			desc = &tx_q->dma_entx[tx_q->cur_tx].basic;
 | 
						|
		else
 | 
						|
			desc = &tx_q->dma_tx[tx_q->cur_tx];
 | 
						|
 | 
						|
		tx_q->tx_count_frames = 0;
 | 
						|
		stmmac_set_tx_ic(priv, desc);
 | 
						|
		priv->xstats.tx_set_ic_bit++;
 | 
						|
	}
 | 
						|
 | 
						|
	/* We've used all descriptors we need for this skb, however,
 | 
						|
	 * advance cur_tx so that it references a fresh descriptor.
 | 
						|
	 * ndo_start_xmit will fill this descriptor the next time it's
 | 
						|
	 * called and stmmac_tx_clean may clean up to this descriptor.
 | 
						|
	 */
 | 
						|
	tx_q->cur_tx = STMMAC_GET_ENTRY(tx_q->cur_tx, priv->dma_conf.dma_tx_size);
 | 
						|
 | 
						|
	if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
 | 
						|
		netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
 | 
						|
			  __func__);
 | 
						|
		netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
	}
 | 
						|
 | 
						|
	dev->stats.tx_bytes += skb->len;
 | 
						|
	priv->xstats.tx_tso_frames++;
 | 
						|
	priv->xstats.tx_tso_nfrags += nfrags;
 | 
						|
 | 
						|
	if (priv->sarc_type)
 | 
						|
		stmmac_set_desc_sarc(priv, first, priv->sarc_type);
 | 
						|
 | 
						|
	skb_tx_timestamp(skb);
 | 
						|
 | 
						|
	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
 | 
						|
		     priv->hwts_tx_en)) {
 | 
						|
		/* declare that device is doing timestamping */
 | 
						|
		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 | 
						|
		stmmac_enable_tx_timestamp(priv, first);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Complete the first descriptor before granting the DMA */
 | 
						|
	stmmac_prepare_tso_tx_desc(priv, first, 1,
 | 
						|
			proto_hdr_len,
 | 
						|
			pay_len,
 | 
						|
			1, tx_q->tx_skbuff_dma[first_entry].last_segment,
 | 
						|
			hdr / 4, (skb->len - proto_hdr_len));
 | 
						|
 | 
						|
	/* If context desc is used to change MSS */
 | 
						|
	if (mss_desc) {
 | 
						|
		/* Make sure that first descriptor has been completely
 | 
						|
		 * written, including its own bit. This is because MSS is
 | 
						|
		 * actually before first descriptor, so we need to make
 | 
						|
		 * sure that MSS's own bit is the last thing written.
 | 
						|
		 */
 | 
						|
		dma_wmb();
 | 
						|
		stmmac_set_tx_owner(priv, mss_desc);
 | 
						|
	}
 | 
						|
 | 
						|
	if (netif_msg_pktdata(priv)) {
 | 
						|
		pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
 | 
						|
			__func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
 | 
						|
			tx_q->cur_tx, first, nfrags);
 | 
						|
		pr_info(">>> frame to be transmitted: ");
 | 
						|
		print_pkt(skb->data, skb_headlen(skb));
 | 
						|
	}
 | 
						|
 | 
						|
	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
 | 
						|
 | 
						|
	stmmac_flush_tx_descriptors(priv, queue);
 | 
						|
	stmmac_tx_timer_arm(priv, queue);
 | 
						|
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
 | 
						|
dma_map_err:
 | 
						|
	dev_err(priv->device, "Tx dma map failed\n");
 | 
						|
	dev_kfree_skb(skb);
 | 
						|
	priv->dev->stats.tx_dropped++;
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_xmit - Tx entry point of the driver
 | 
						|
 *  @skb : the socket buffer
 | 
						|
 *  @dev : device pointer
 | 
						|
 *  Description : this is the tx entry point of the driver.
 | 
						|
 *  It programs the chain or the ring and supports oversized frames
 | 
						|
 *  and SG feature.
 | 
						|
 */
 | 
						|
static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 | 
						|
{
 | 
						|
	unsigned int first_entry, tx_packets, enh_desc;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	unsigned int nopaged_len = skb_headlen(skb);
 | 
						|
	int i, csum_insertion = 0, is_jumbo = 0;
 | 
						|
	u32 queue = skb_get_queue_mapping(skb);
 | 
						|
	int nfrags = skb_shinfo(skb)->nr_frags;
 | 
						|
	int gso = skb_shinfo(skb)->gso_type;
 | 
						|
	struct dma_edesc *tbs_desc = NULL;
 | 
						|
	struct dma_desc *desc, *first;
 | 
						|
	struct stmmac_tx_queue *tx_q;
 | 
						|
	bool has_vlan, set_ic;
 | 
						|
	int entry, first_tx;
 | 
						|
	dma_addr_t des;
 | 
						|
 | 
						|
	tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	first_tx = tx_q->cur_tx;
 | 
						|
 | 
						|
	if (priv->tx_path_in_lpi_mode && priv->eee_sw_timer_en)
 | 
						|
		stmmac_disable_eee_mode(priv);
 | 
						|
 | 
						|
	/* Manage oversized TCP frames for GMAC4 device */
 | 
						|
	if (skb_is_gso(skb) && priv->tso) {
 | 
						|
		if (gso & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))
 | 
						|
			return stmmac_tso_xmit(skb, dev);
 | 
						|
		if (priv->plat->has_gmac4 && (gso & SKB_GSO_UDP_L4))
 | 
						|
			return stmmac_tso_xmit(skb, dev);
 | 
						|
	}
 | 
						|
 | 
						|
	if (unlikely(stmmac_tx_avail(priv, queue) < nfrags + 1)) {
 | 
						|
		if (!netif_tx_queue_stopped(netdev_get_tx_queue(dev, queue))) {
 | 
						|
			netif_tx_stop_queue(netdev_get_tx_queue(priv->dev,
 | 
						|
								queue));
 | 
						|
			/* This is a hard error, log it. */
 | 
						|
			netdev_err(priv->dev,
 | 
						|
				   "%s: Tx Ring full when queue awake\n",
 | 
						|
				   __func__);
 | 
						|
		}
 | 
						|
		return NETDEV_TX_BUSY;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Check if VLAN can be inserted by HW */
 | 
						|
	has_vlan = stmmac_vlan_insert(priv, skb, tx_q);
 | 
						|
 | 
						|
	entry = tx_q->cur_tx;
 | 
						|
	first_entry = entry;
 | 
						|
	WARN_ON(tx_q->tx_skbuff[first_entry]);
 | 
						|
 | 
						|
	csum_insertion = (skb->ip_summed == CHECKSUM_PARTIAL);
 | 
						|
 | 
						|
	if (likely(priv->extend_desc))
 | 
						|
		desc = (struct dma_desc *)(tx_q->dma_etx + entry);
 | 
						|
	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		desc = &tx_q->dma_entx[entry].basic;
 | 
						|
	else
 | 
						|
		desc = tx_q->dma_tx + entry;
 | 
						|
 | 
						|
	first = desc;
 | 
						|
 | 
						|
	if (has_vlan)
 | 
						|
		stmmac_set_desc_vlan(priv, first, STMMAC_VLAN_INSERT);
 | 
						|
 | 
						|
	enh_desc = priv->plat->enh_desc;
 | 
						|
	/* To program the descriptors according to the size of the frame */
 | 
						|
	if (enh_desc)
 | 
						|
		is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
 | 
						|
 | 
						|
	if (unlikely(is_jumbo)) {
 | 
						|
		entry = stmmac_jumbo_frm(priv, tx_q, skb, csum_insertion);
 | 
						|
		if (unlikely(entry < 0) && (entry != -EINVAL))
 | 
						|
			goto dma_map_err;
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < nfrags; i++) {
 | 
						|
		const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 | 
						|
		int len = skb_frag_size(frag);
 | 
						|
		bool last_segment = (i == (nfrags - 1));
 | 
						|
 | 
						|
		entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
 | 
						|
		WARN_ON(tx_q->tx_skbuff[entry]);
 | 
						|
 | 
						|
		if (likely(priv->extend_desc))
 | 
						|
			desc = (struct dma_desc *)(tx_q->dma_etx + entry);
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			desc = &tx_q->dma_entx[entry].basic;
 | 
						|
		else
 | 
						|
			desc = tx_q->dma_tx + entry;
 | 
						|
 | 
						|
		des = skb_frag_dma_map(priv->device, frag, 0, len,
 | 
						|
				       DMA_TO_DEVICE);
 | 
						|
		if (dma_mapping_error(priv->device, des))
 | 
						|
			goto dma_map_err; /* should reuse desc w/o issues */
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf = des;
 | 
						|
 | 
						|
		stmmac_set_desc_addr(priv, desc, des);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].map_as_page = true;
 | 
						|
		tx_q->tx_skbuff_dma[entry].len = len;
 | 
						|
		tx_q->tx_skbuff_dma[entry].last_segment = last_segment;
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
 | 
						|
		/* Prepare the descriptor and set the own bit too */
 | 
						|
		stmmac_prepare_tx_desc(priv, desc, 0, len, csum_insertion,
 | 
						|
				priv->mode, 1, last_segment, skb->len);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Only the last descriptor gets to point to the skb. */
 | 
						|
	tx_q->tx_skbuff[entry] = skb;
 | 
						|
	tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
 | 
						|
	/* According to the coalesce parameter the IC bit for the latest
 | 
						|
	 * segment is reset and the timer re-started to clean the tx status.
 | 
						|
	 * This approach takes care about the fragments: desc is the first
 | 
						|
	 * element in case of no SG.
 | 
						|
	 */
 | 
						|
	tx_packets = (entry + 1) - first_tx;
 | 
						|
	tx_q->tx_count_frames += tx_packets;
 | 
						|
 | 
						|
	if ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && priv->hwts_tx_en)
 | 
						|
		set_ic = true;
 | 
						|
	else if (!priv->tx_coal_frames[queue])
 | 
						|
		set_ic = false;
 | 
						|
	else if (tx_packets > priv->tx_coal_frames[queue])
 | 
						|
		set_ic = true;
 | 
						|
	else if ((tx_q->tx_count_frames %
 | 
						|
		  priv->tx_coal_frames[queue]) < tx_packets)
 | 
						|
		set_ic = true;
 | 
						|
	else
 | 
						|
		set_ic = false;
 | 
						|
 | 
						|
	if (set_ic) {
 | 
						|
		if (likely(priv->extend_desc))
 | 
						|
			desc = &tx_q->dma_etx[entry].basic;
 | 
						|
		else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
			desc = &tx_q->dma_entx[entry].basic;
 | 
						|
		else
 | 
						|
			desc = &tx_q->dma_tx[entry];
 | 
						|
 | 
						|
		tx_q->tx_count_frames = 0;
 | 
						|
		stmmac_set_tx_ic(priv, desc);
 | 
						|
		priv->xstats.tx_set_ic_bit++;
 | 
						|
	}
 | 
						|
 | 
						|
	/* We've used all descriptors we need for this skb, however,
 | 
						|
	 * advance cur_tx so that it references a fresh descriptor.
 | 
						|
	 * ndo_start_xmit will fill this descriptor the next time it's
 | 
						|
	 * called and stmmac_tx_clean may clean up to this descriptor.
 | 
						|
	 */
 | 
						|
	entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
 | 
						|
	tx_q->cur_tx = entry;
 | 
						|
 | 
						|
	if (netif_msg_pktdata(priv)) {
 | 
						|
		netdev_dbg(priv->dev,
 | 
						|
			   "%s: curr=%d dirty=%d f=%d, e=%d, first=%p, nfrags=%d",
 | 
						|
			   __func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
 | 
						|
			   entry, first, nfrags);
 | 
						|
 | 
						|
		netdev_dbg(priv->dev, ">>> frame to be transmitted: ");
 | 
						|
		print_pkt(skb->data, skb->len);
 | 
						|
	}
 | 
						|
 | 
						|
	if (unlikely(stmmac_tx_avail(priv, queue) <= (MAX_SKB_FRAGS + 1))) {
 | 
						|
		netif_dbg(priv, hw, priv->dev, "%s: stop transmitted packets\n",
 | 
						|
			  __func__);
 | 
						|
		netif_tx_stop_queue(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
	}
 | 
						|
 | 
						|
	dev->stats.tx_bytes += skb->len;
 | 
						|
 | 
						|
	if (priv->sarc_type)
 | 
						|
		stmmac_set_desc_sarc(priv, first, priv->sarc_type);
 | 
						|
 | 
						|
	skb_tx_timestamp(skb);
 | 
						|
 | 
						|
	/* Ready to fill the first descriptor and set the OWN bit w/o any
 | 
						|
	 * problems because all the descriptors are actually ready to be
 | 
						|
	 * passed to the DMA engine.
 | 
						|
	 */
 | 
						|
	if (likely(!is_jumbo)) {
 | 
						|
		bool last_segment = (nfrags == 0);
 | 
						|
 | 
						|
		des = dma_map_single(priv->device, skb->data,
 | 
						|
				     nopaged_len, DMA_TO_DEVICE);
 | 
						|
		if (dma_mapping_error(priv->device, des))
 | 
						|
			goto dma_map_err;
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[first_entry].buf = des;
 | 
						|
		tx_q->tx_skbuff_dma[first_entry].buf_type = STMMAC_TXBUF_T_SKB;
 | 
						|
		tx_q->tx_skbuff_dma[first_entry].map_as_page = false;
 | 
						|
 | 
						|
		stmmac_set_desc_addr(priv, first, des);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[first_entry].len = nopaged_len;
 | 
						|
		tx_q->tx_skbuff_dma[first_entry].last_segment = last_segment;
 | 
						|
 | 
						|
		if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
 | 
						|
			     priv->hwts_tx_en)) {
 | 
						|
			/* declare that device is doing timestamping */
 | 
						|
			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 | 
						|
			stmmac_enable_tx_timestamp(priv, first);
 | 
						|
		}
 | 
						|
 | 
						|
		/* Prepare the first descriptor setting the OWN bit too */
 | 
						|
		stmmac_prepare_tx_desc(priv, first, 1, nopaged_len,
 | 
						|
				csum_insertion, priv->mode, 0, last_segment,
 | 
						|
				skb->len);
 | 
						|
	}
 | 
						|
 | 
						|
	if (tx_q->tbs & STMMAC_TBS_EN) {
 | 
						|
		struct timespec64 ts = ns_to_timespec64(skb->tstamp);
 | 
						|
 | 
						|
		tbs_desc = &tx_q->dma_entx[first_entry];
 | 
						|
		stmmac_set_desc_tbs(priv, tbs_desc, ts.tv_sec, ts.tv_nsec);
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_set_tx_owner(priv, first);
 | 
						|
 | 
						|
	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
 | 
						|
 | 
						|
	stmmac_enable_dma_transmission(priv, priv->ioaddr);
 | 
						|
 | 
						|
	stmmac_flush_tx_descriptors(priv, queue);
 | 
						|
	stmmac_tx_timer_arm(priv, queue);
 | 
						|
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
 | 
						|
dma_map_err:
 | 
						|
	netdev_err(priv->dev, "Tx DMA map failed\n");
 | 
						|
	dev_kfree_skb(skb);
 | 
						|
	priv->dev->stats.tx_dropped++;
 | 
						|
	return NETDEV_TX_OK;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_rx_vlan(struct net_device *dev, struct sk_buff *skb)
 | 
						|
{
 | 
						|
	struct vlan_ethhdr *veth = skb_vlan_eth_hdr(skb);
 | 
						|
	__be16 vlan_proto = veth->h_vlan_proto;
 | 
						|
	u16 vlanid;
 | 
						|
 | 
						|
	if ((vlan_proto == htons(ETH_P_8021Q) &&
 | 
						|
	     dev->features & NETIF_F_HW_VLAN_CTAG_RX) ||
 | 
						|
	    (vlan_proto == htons(ETH_P_8021AD) &&
 | 
						|
	     dev->features & NETIF_F_HW_VLAN_STAG_RX)) {
 | 
						|
		/* pop the vlan tag */
 | 
						|
		vlanid = ntohs(veth->h_vlan_TCI);
 | 
						|
		memmove(skb->data + VLAN_HLEN, veth, ETH_ALEN * 2);
 | 
						|
		skb_pull(skb, VLAN_HLEN);
 | 
						|
		__vlan_hwaccel_put_tag(skb, vlan_proto, vlanid);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_rx_refill - refill used skb preallocated buffers
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @queue: RX queue index
 | 
						|
 * Description : this is to reallocate the skb for the reception process
 | 
						|
 * that is based on zero-copy.
 | 
						|
 */
 | 
						|
static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	int dirty = stmmac_rx_dirty(priv, queue);
 | 
						|
	unsigned int entry = rx_q->dirty_rx;
 | 
						|
	gfp_t gfp = (GFP_ATOMIC | __GFP_NOWARN);
 | 
						|
 | 
						|
	if (priv->dma_cap.host_dma_width <= 32)
 | 
						|
		gfp |= GFP_DMA32;
 | 
						|
 | 
						|
	while (dirty-- > 0) {
 | 
						|
		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[entry];
 | 
						|
		struct dma_desc *p;
 | 
						|
		bool use_rx_wd;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = (struct dma_desc *)(rx_q->dma_erx + entry);
 | 
						|
		else
 | 
						|
			p = rx_q->dma_rx + entry;
 | 
						|
 | 
						|
		if (!buf->page) {
 | 
						|
			buf->page = page_pool_alloc_pages(rx_q->page_pool, gfp);
 | 
						|
			if (!buf->page)
 | 
						|
				break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->sph && !buf->sec_page) {
 | 
						|
			buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
 | 
						|
			if (!buf->sec_page)
 | 
						|
				break;
 | 
						|
 | 
						|
			buf->sec_addr = page_pool_get_dma_addr(buf->sec_page);
 | 
						|
		}
 | 
						|
 | 
						|
		buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
 | 
						|
 | 
						|
		stmmac_set_desc_addr(priv, p, buf->addr);
 | 
						|
		if (priv->sph)
 | 
						|
			stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
 | 
						|
		else
 | 
						|
			stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
 | 
						|
		stmmac_refill_desc3(priv, rx_q, p);
 | 
						|
 | 
						|
		rx_q->rx_count_frames++;
 | 
						|
		rx_q->rx_count_frames += priv->rx_coal_frames[queue];
 | 
						|
		if (rx_q->rx_count_frames > priv->rx_coal_frames[queue])
 | 
						|
			rx_q->rx_count_frames = 0;
 | 
						|
 | 
						|
		use_rx_wd = !priv->rx_coal_frames[queue];
 | 
						|
		use_rx_wd |= rx_q->rx_count_frames > 0;
 | 
						|
		if (!priv->use_riwt)
 | 
						|
			use_rx_wd = false;
 | 
						|
 | 
						|
		dma_wmb();
 | 
						|
		stmmac_set_rx_owner(priv, p, use_rx_wd);
 | 
						|
 | 
						|
		entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_rx_size);
 | 
						|
	}
 | 
						|
	rx_q->dirty_rx = entry;
 | 
						|
	rx_q->rx_tail_addr = rx_q->dma_rx_phy +
 | 
						|
			    (rx_q->dirty_rx * sizeof(struct dma_desc));
 | 
						|
	stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
 | 
						|
				       struct dma_desc *p,
 | 
						|
				       int status, unsigned int len)
 | 
						|
{
 | 
						|
	unsigned int plen = 0, hlen = 0;
 | 
						|
	int coe = priv->hw->rx_csum;
 | 
						|
 | 
						|
	/* Not first descriptor, buffer is always zero */
 | 
						|
	if (priv->sph && len)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/* First descriptor, get split header length */
 | 
						|
	stmmac_get_rx_header_len(priv, p, &hlen);
 | 
						|
	if (priv->sph && hlen) {
 | 
						|
		priv->xstats.rx_split_hdr_pkt_n++;
 | 
						|
		return hlen;
 | 
						|
	}
 | 
						|
 | 
						|
	/* First descriptor, not last descriptor and not split header */
 | 
						|
	if (status & rx_not_ls)
 | 
						|
		return priv->dma_conf.dma_buf_sz;
 | 
						|
 | 
						|
	plen = stmmac_get_rx_frame_len(priv, p, coe);
 | 
						|
 | 
						|
	/* First descriptor and last descriptor and not split header */
 | 
						|
	return min_t(unsigned int, priv->dma_conf.dma_buf_sz, plen);
 | 
						|
}
 | 
						|
 | 
						|
static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
 | 
						|
				       struct dma_desc *p,
 | 
						|
				       int status, unsigned int len)
 | 
						|
{
 | 
						|
	int coe = priv->hw->rx_csum;
 | 
						|
	unsigned int plen = 0;
 | 
						|
 | 
						|
	/* Not split header, buffer is not available */
 | 
						|
	if (!priv->sph)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/* Not last descriptor */
 | 
						|
	if (status & rx_not_ls)
 | 
						|
		return priv->dma_conf.dma_buf_sz;
 | 
						|
 | 
						|
	plen = stmmac_get_rx_frame_len(priv, p, coe);
 | 
						|
 | 
						|
	/* Last descriptor */
 | 
						|
	return plen - len;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue,
 | 
						|
				struct xdp_frame *xdpf, bool dma_map)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	unsigned int entry = tx_q->cur_tx;
 | 
						|
	struct dma_desc *tx_desc;
 | 
						|
	dma_addr_t dma_addr;
 | 
						|
	bool set_ic;
 | 
						|
 | 
						|
	if (stmmac_tx_avail(priv, queue) < STMMAC_TX_THRESH(priv))
 | 
						|
		return STMMAC_XDP_CONSUMED;
 | 
						|
 | 
						|
	if (likely(priv->extend_desc))
 | 
						|
		tx_desc = (struct dma_desc *)(tx_q->dma_etx + entry);
 | 
						|
	else if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		tx_desc = &tx_q->dma_entx[entry].basic;
 | 
						|
	else
 | 
						|
		tx_desc = tx_q->dma_tx + entry;
 | 
						|
 | 
						|
	if (dma_map) {
 | 
						|
		dma_addr = dma_map_single(priv->device, xdpf->data,
 | 
						|
					  xdpf->len, DMA_TO_DEVICE);
 | 
						|
		if (dma_mapping_error(priv->device, dma_addr))
 | 
						|
			return STMMAC_XDP_CONSUMED;
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XDP_NDO;
 | 
						|
	} else {
 | 
						|
		struct page *page = virt_to_page(xdpf->data);
 | 
						|
 | 
						|
		dma_addr = page_pool_get_dma_addr(page) + sizeof(*xdpf) +
 | 
						|
			   xdpf->headroom;
 | 
						|
		dma_sync_single_for_device(priv->device, dma_addr,
 | 
						|
					   xdpf->len, DMA_BIDIRECTIONAL);
 | 
						|
 | 
						|
		tx_q->tx_skbuff_dma[entry].buf_type = STMMAC_TXBUF_T_XDP_TX;
 | 
						|
	}
 | 
						|
 | 
						|
	tx_q->tx_skbuff_dma[entry].buf = dma_addr;
 | 
						|
	tx_q->tx_skbuff_dma[entry].map_as_page = false;
 | 
						|
	tx_q->tx_skbuff_dma[entry].len = xdpf->len;
 | 
						|
	tx_q->tx_skbuff_dma[entry].last_segment = true;
 | 
						|
	tx_q->tx_skbuff_dma[entry].is_jumbo = false;
 | 
						|
 | 
						|
	tx_q->xdpf[entry] = xdpf;
 | 
						|
 | 
						|
	stmmac_set_desc_addr(priv, tx_desc, dma_addr);
 | 
						|
 | 
						|
	stmmac_prepare_tx_desc(priv, tx_desc, 1, xdpf->len,
 | 
						|
			       true, priv->mode, true, true,
 | 
						|
			       xdpf->len);
 | 
						|
 | 
						|
	tx_q->tx_count_frames++;
 | 
						|
 | 
						|
	if (tx_q->tx_count_frames % priv->tx_coal_frames[queue] == 0)
 | 
						|
		set_ic = true;
 | 
						|
	else
 | 
						|
		set_ic = false;
 | 
						|
 | 
						|
	if (set_ic) {
 | 
						|
		tx_q->tx_count_frames = 0;
 | 
						|
		stmmac_set_tx_ic(priv, tx_desc);
 | 
						|
		priv->xstats.tx_set_ic_bit++;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_enable_dma_transmission(priv, priv->ioaddr);
 | 
						|
 | 
						|
	entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
 | 
						|
	tx_q->cur_tx = entry;
 | 
						|
 | 
						|
	return STMMAC_XDP_TX;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_xdp_get_tx_queue(struct stmmac_priv *priv,
 | 
						|
				   int cpu)
 | 
						|
{
 | 
						|
	int index = cpu;
 | 
						|
 | 
						|
	if (unlikely(index < 0))
 | 
						|
		index = 0;
 | 
						|
 | 
						|
	while (index >= priv->plat->tx_queues_to_use)
 | 
						|
		index -= priv->plat->tx_queues_to_use;
 | 
						|
 | 
						|
	return index;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_xdp_xmit_back(struct stmmac_priv *priv,
 | 
						|
				struct xdp_buff *xdp)
 | 
						|
{
 | 
						|
	struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
 | 
						|
	int cpu = smp_processor_id();
 | 
						|
	struct netdev_queue *nq;
 | 
						|
	int queue;
 | 
						|
	int res;
 | 
						|
 | 
						|
	if (unlikely(!xdpf))
 | 
						|
		return STMMAC_XDP_CONSUMED;
 | 
						|
 | 
						|
	queue = stmmac_xdp_get_tx_queue(priv, cpu);
 | 
						|
	nq = netdev_get_tx_queue(priv->dev, queue);
 | 
						|
 | 
						|
	__netif_tx_lock(nq, cpu);
 | 
						|
	/* Avoids TX time-out as we are sharing with slow path */
 | 
						|
	txq_trans_cond_update(nq);
 | 
						|
 | 
						|
	res = stmmac_xdp_xmit_xdpf(priv, queue, xdpf, false);
 | 
						|
	if (res == STMMAC_XDP_TX)
 | 
						|
		stmmac_flush_tx_descriptors(priv, queue);
 | 
						|
 | 
						|
	__netif_tx_unlock(nq);
 | 
						|
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
static int __stmmac_xdp_run_prog(struct stmmac_priv *priv,
 | 
						|
				 struct bpf_prog *prog,
 | 
						|
				 struct xdp_buff *xdp)
 | 
						|
{
 | 
						|
	u32 act;
 | 
						|
	int res;
 | 
						|
 | 
						|
	act = bpf_prog_run_xdp(prog, xdp);
 | 
						|
	switch (act) {
 | 
						|
	case XDP_PASS:
 | 
						|
		res = STMMAC_XDP_PASS;
 | 
						|
		break;
 | 
						|
	case XDP_TX:
 | 
						|
		res = stmmac_xdp_xmit_back(priv, xdp);
 | 
						|
		break;
 | 
						|
	case XDP_REDIRECT:
 | 
						|
		if (xdp_do_redirect(priv->dev, xdp, prog) < 0)
 | 
						|
			res = STMMAC_XDP_CONSUMED;
 | 
						|
		else
 | 
						|
			res = STMMAC_XDP_REDIRECT;
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		bpf_warn_invalid_xdp_action(priv->dev, prog, act);
 | 
						|
		fallthrough;
 | 
						|
	case XDP_ABORTED:
 | 
						|
		trace_xdp_exception(priv->dev, prog, act);
 | 
						|
		fallthrough;
 | 
						|
	case XDP_DROP:
 | 
						|
		res = STMMAC_XDP_CONSUMED;
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return res;
 | 
						|
}
 | 
						|
 | 
						|
static struct sk_buff *stmmac_xdp_run_prog(struct stmmac_priv *priv,
 | 
						|
					   struct xdp_buff *xdp)
 | 
						|
{
 | 
						|
	struct bpf_prog *prog;
 | 
						|
	int res;
 | 
						|
 | 
						|
	prog = READ_ONCE(priv->xdp_prog);
 | 
						|
	if (!prog) {
 | 
						|
		res = STMMAC_XDP_PASS;
 | 
						|
		goto out;
 | 
						|
	}
 | 
						|
 | 
						|
	res = __stmmac_xdp_run_prog(priv, prog, xdp);
 | 
						|
out:
 | 
						|
	return ERR_PTR(-res);
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_finalize_xdp_rx(struct stmmac_priv *priv,
 | 
						|
				   int xdp_status)
 | 
						|
{
 | 
						|
	int cpu = smp_processor_id();
 | 
						|
	int queue;
 | 
						|
 | 
						|
	queue = stmmac_xdp_get_tx_queue(priv, cpu);
 | 
						|
 | 
						|
	if (xdp_status & STMMAC_XDP_TX)
 | 
						|
		stmmac_tx_timer_arm(priv, queue);
 | 
						|
 | 
						|
	if (xdp_status & STMMAC_XDP_REDIRECT)
 | 
						|
		xdp_do_flush();
 | 
						|
}
 | 
						|
 | 
						|
static struct sk_buff *stmmac_construct_skb_zc(struct stmmac_channel *ch,
 | 
						|
					       struct xdp_buff *xdp)
 | 
						|
{
 | 
						|
	unsigned int metasize = xdp->data - xdp->data_meta;
 | 
						|
	unsigned int datasize = xdp->data_end - xdp->data;
 | 
						|
	struct sk_buff *skb;
 | 
						|
 | 
						|
	skb = __napi_alloc_skb(&ch->rxtx_napi,
 | 
						|
			       xdp->data_end - xdp->data_hard_start,
 | 
						|
			       GFP_ATOMIC | __GFP_NOWARN);
 | 
						|
	if (unlikely(!skb))
 | 
						|
		return NULL;
 | 
						|
 | 
						|
	skb_reserve(skb, xdp->data - xdp->data_hard_start);
 | 
						|
	memcpy(__skb_put(skb, datasize), xdp->data, datasize);
 | 
						|
	if (metasize)
 | 
						|
		skb_metadata_set(skb, metasize);
 | 
						|
 | 
						|
	return skb;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_dispatch_skb_zc(struct stmmac_priv *priv, u32 queue,
 | 
						|
				   struct dma_desc *p, struct dma_desc *np,
 | 
						|
				   struct xdp_buff *xdp)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned int len = xdp->data_end - xdp->data;
 | 
						|
	enum pkt_hash_types hash_type;
 | 
						|
	int coe = priv->hw->rx_csum;
 | 
						|
	struct sk_buff *skb;
 | 
						|
	u32 hash;
 | 
						|
 | 
						|
	skb = stmmac_construct_skb_zc(ch, xdp);
 | 
						|
	if (!skb) {
 | 
						|
		priv->dev->stats.rx_dropped++;
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_get_rx_hwtstamp(priv, p, np, skb);
 | 
						|
	stmmac_rx_vlan(priv->dev, skb);
 | 
						|
	skb->protocol = eth_type_trans(skb, priv->dev);
 | 
						|
 | 
						|
	if (unlikely(!coe))
 | 
						|
		skb_checksum_none_assert(skb);
 | 
						|
	else
 | 
						|
		skb->ip_summed = CHECKSUM_UNNECESSARY;
 | 
						|
 | 
						|
	if (!stmmac_get_rx_hash(priv, p, &hash, &hash_type))
 | 
						|
		skb_set_hash(skb, hash, hash_type);
 | 
						|
 | 
						|
	skb_record_rx_queue(skb, queue);
 | 
						|
	napi_gro_receive(&ch->rxtx_napi, skb);
 | 
						|
 | 
						|
	priv->dev->stats.rx_packets++;
 | 
						|
	priv->dev->stats.rx_bytes += len;
 | 
						|
}
 | 
						|
 | 
						|
static bool stmmac_rx_refill_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	unsigned int entry = rx_q->dirty_rx;
 | 
						|
	struct dma_desc *rx_desc = NULL;
 | 
						|
	bool ret = true;
 | 
						|
 | 
						|
	budget = min(budget, stmmac_rx_dirty(priv, queue));
 | 
						|
 | 
						|
	while (budget-- > 0 && entry != rx_q->cur_rx) {
 | 
						|
		struct stmmac_rx_buffer *buf = &rx_q->buf_pool[entry];
 | 
						|
		dma_addr_t dma_addr;
 | 
						|
		bool use_rx_wd;
 | 
						|
 | 
						|
		if (!buf->xdp) {
 | 
						|
			buf->xdp = xsk_buff_alloc(rx_q->xsk_pool);
 | 
						|
			if (!buf->xdp) {
 | 
						|
				ret = false;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			rx_desc = (struct dma_desc *)(rx_q->dma_erx + entry);
 | 
						|
		else
 | 
						|
			rx_desc = rx_q->dma_rx + entry;
 | 
						|
 | 
						|
		dma_addr = xsk_buff_xdp_get_dma(buf->xdp);
 | 
						|
		stmmac_set_desc_addr(priv, rx_desc, dma_addr);
 | 
						|
		stmmac_set_desc_sec_addr(priv, rx_desc, 0, false);
 | 
						|
		stmmac_refill_desc3(priv, rx_q, rx_desc);
 | 
						|
 | 
						|
		rx_q->rx_count_frames++;
 | 
						|
		rx_q->rx_count_frames += priv->rx_coal_frames[queue];
 | 
						|
		if (rx_q->rx_count_frames > priv->rx_coal_frames[queue])
 | 
						|
			rx_q->rx_count_frames = 0;
 | 
						|
 | 
						|
		use_rx_wd = !priv->rx_coal_frames[queue];
 | 
						|
		use_rx_wd |= rx_q->rx_count_frames > 0;
 | 
						|
		if (!priv->use_riwt)
 | 
						|
			use_rx_wd = false;
 | 
						|
 | 
						|
		dma_wmb();
 | 
						|
		stmmac_set_rx_owner(priv, rx_desc, use_rx_wd);
 | 
						|
 | 
						|
		entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_rx_size);
 | 
						|
	}
 | 
						|
 | 
						|
	if (rx_desc) {
 | 
						|
		rx_q->dirty_rx = entry;
 | 
						|
		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
 | 
						|
				     (rx_q->dirty_rx * sizeof(struct dma_desc));
 | 
						|
		stmmac_set_rx_tail_ptr(priv, priv->ioaddr, rx_q->rx_tail_addr, queue);
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_rx_zc(struct stmmac_priv *priv, int limit, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	unsigned int count = 0, error = 0, len = 0;
 | 
						|
	int dirty = stmmac_rx_dirty(priv, queue);
 | 
						|
	unsigned int next_entry = rx_q->cur_rx;
 | 
						|
	unsigned int desc_size;
 | 
						|
	struct bpf_prog *prog;
 | 
						|
	bool failure = false;
 | 
						|
	int xdp_status = 0;
 | 
						|
	int status = 0;
 | 
						|
 | 
						|
	if (netif_msg_rx_status(priv)) {
 | 
						|
		void *rx_head;
 | 
						|
 | 
						|
		netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			rx_head = (void *)rx_q->dma_erx;
 | 
						|
			desc_size = sizeof(struct dma_extended_desc);
 | 
						|
		} else {
 | 
						|
			rx_head = (void *)rx_q->dma_rx;
 | 
						|
			desc_size = sizeof(struct dma_desc);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_display_ring(priv, rx_head, priv->dma_conf.dma_rx_size, true,
 | 
						|
				    rx_q->dma_rx_phy, desc_size);
 | 
						|
	}
 | 
						|
	while (count < limit) {
 | 
						|
		struct stmmac_rx_buffer *buf;
 | 
						|
		unsigned int buf1_len = 0;
 | 
						|
		struct dma_desc *np, *p;
 | 
						|
		int entry;
 | 
						|
		int res;
 | 
						|
 | 
						|
		if (!count && rx_q->state_saved) {
 | 
						|
			error = rx_q->state.error;
 | 
						|
			len = rx_q->state.len;
 | 
						|
		} else {
 | 
						|
			rx_q->state_saved = false;
 | 
						|
			error = 0;
 | 
						|
			len = 0;
 | 
						|
		}
 | 
						|
 | 
						|
		if ((count >= limit - 1) && limit > 1)
 | 
						|
			break;
 | 
						|
 | 
						|
read_again:
 | 
						|
		buf1_len = 0;
 | 
						|
		entry = next_entry;
 | 
						|
		buf = &rx_q->buf_pool[entry];
 | 
						|
 | 
						|
		if (dirty >= STMMAC_RX_FILL_BATCH) {
 | 
						|
			failure = failure ||
 | 
						|
				  !stmmac_rx_refill_zc(priv, queue, dirty);
 | 
						|
			dirty = 0;
 | 
						|
		}
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = (struct dma_desc *)(rx_q->dma_erx + entry);
 | 
						|
		else
 | 
						|
			p = rx_q->dma_rx + entry;
 | 
						|
 | 
						|
		/* read the status of the incoming frame */
 | 
						|
		status = stmmac_rx_status(priv, &priv->dev->stats,
 | 
						|
					  &priv->xstats, p);
 | 
						|
		/* check if managed by the DMA otherwise go ahead */
 | 
						|
		if (unlikely(status & dma_own))
 | 
						|
			break;
 | 
						|
 | 
						|
		/* Prefetch the next RX descriptor */
 | 
						|
		rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx,
 | 
						|
						priv->dma_conf.dma_rx_size);
 | 
						|
		next_entry = rx_q->cur_rx;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			np = (struct dma_desc *)(rx_q->dma_erx + next_entry);
 | 
						|
		else
 | 
						|
			np = rx_q->dma_rx + next_entry;
 | 
						|
 | 
						|
		prefetch(np);
 | 
						|
 | 
						|
		/* Ensure a valid XSK buffer before proceed */
 | 
						|
		if (!buf->xdp)
 | 
						|
			break;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			stmmac_rx_extended_status(priv, &priv->dev->stats,
 | 
						|
						  &priv->xstats,
 | 
						|
						  rx_q->dma_erx + entry);
 | 
						|
		if (unlikely(status == discard_frame)) {
 | 
						|
			xsk_buff_free(buf->xdp);
 | 
						|
			buf->xdp = NULL;
 | 
						|
			dirty++;
 | 
						|
			error = 1;
 | 
						|
			if (!priv->hwts_rx_en)
 | 
						|
				priv->dev->stats.rx_errors++;
 | 
						|
		}
 | 
						|
 | 
						|
		if (unlikely(error && (status & rx_not_ls)))
 | 
						|
			goto read_again;
 | 
						|
		if (unlikely(error)) {
 | 
						|
			count++;
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
 | 
						|
		if (likely(status & rx_not_ls)) {
 | 
						|
			xsk_buff_free(buf->xdp);
 | 
						|
			buf->xdp = NULL;
 | 
						|
			dirty++;
 | 
						|
			count++;
 | 
						|
			goto read_again;
 | 
						|
		}
 | 
						|
 | 
						|
		/* XDP ZC Frame only support primary buffers for now */
 | 
						|
		buf1_len = stmmac_rx_buf1_len(priv, p, status, len);
 | 
						|
		len += buf1_len;
 | 
						|
 | 
						|
		/* ACS is disabled; strip manually. */
 | 
						|
		if (likely(!(status & rx_not_ls))) {
 | 
						|
			buf1_len -= ETH_FCS_LEN;
 | 
						|
			len -= ETH_FCS_LEN;
 | 
						|
		}
 | 
						|
 | 
						|
		/* RX buffer is good and fit into a XSK pool buffer */
 | 
						|
		buf->xdp->data_end = buf->xdp->data + buf1_len;
 | 
						|
		xsk_buff_dma_sync_for_cpu(buf->xdp, rx_q->xsk_pool);
 | 
						|
 | 
						|
		prog = READ_ONCE(priv->xdp_prog);
 | 
						|
		res = __stmmac_xdp_run_prog(priv, prog, buf->xdp);
 | 
						|
 | 
						|
		switch (res) {
 | 
						|
		case STMMAC_XDP_PASS:
 | 
						|
			stmmac_dispatch_skb_zc(priv, queue, p, np, buf->xdp);
 | 
						|
			xsk_buff_free(buf->xdp);
 | 
						|
			break;
 | 
						|
		case STMMAC_XDP_CONSUMED:
 | 
						|
			xsk_buff_free(buf->xdp);
 | 
						|
			priv->dev->stats.rx_dropped++;
 | 
						|
			break;
 | 
						|
		case STMMAC_XDP_TX:
 | 
						|
		case STMMAC_XDP_REDIRECT:
 | 
						|
			xdp_status |= res;
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		buf->xdp = NULL;
 | 
						|
		dirty++;
 | 
						|
		count++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (status & rx_not_ls) {
 | 
						|
		rx_q->state_saved = true;
 | 
						|
		rx_q->state.error = error;
 | 
						|
		rx_q->state.len = len;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_finalize_xdp_rx(priv, xdp_status);
 | 
						|
 | 
						|
	priv->xstats.rx_pkt_n += count;
 | 
						|
	priv->xstats.rxq_stats[queue].rx_pkt_n += count;
 | 
						|
 | 
						|
	if (xsk_uses_need_wakeup(rx_q->xsk_pool)) {
 | 
						|
		if (failure || stmmac_rx_dirty(priv, queue) > 0)
 | 
						|
			xsk_set_rx_need_wakeup(rx_q->xsk_pool);
 | 
						|
		else
 | 
						|
			xsk_clear_rx_need_wakeup(rx_q->xsk_pool);
 | 
						|
 | 
						|
		return (int)count;
 | 
						|
	}
 | 
						|
 | 
						|
	return failure ? limit : (int)count;
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_rx - manage the receive process
 | 
						|
 * @priv: driver private structure
 | 
						|
 * @limit: napi bugget
 | 
						|
 * @queue: RX queue index.
 | 
						|
 * Description :  this the function called by the napi poll method.
 | 
						|
 * It gets all the frames inside the ring.
 | 
						|
 */
 | 
						|
static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned int count = 0, error = 0, len = 0;
 | 
						|
	int status = 0, coe = priv->hw->rx_csum;
 | 
						|
	unsigned int next_entry = rx_q->cur_rx;
 | 
						|
	enum dma_data_direction dma_dir;
 | 
						|
	unsigned int desc_size;
 | 
						|
	struct sk_buff *skb = NULL;
 | 
						|
	struct xdp_buff xdp;
 | 
						|
	int xdp_status = 0;
 | 
						|
	int buf_sz;
 | 
						|
 | 
						|
	dma_dir = page_pool_get_dma_dir(rx_q->page_pool);
 | 
						|
	buf_sz = DIV_ROUND_UP(priv->dma_conf.dma_buf_sz, PAGE_SIZE) * PAGE_SIZE;
 | 
						|
	limit = min(priv->dma_conf.dma_rx_size - 1, (unsigned int)limit);
 | 
						|
 | 
						|
	if (netif_msg_rx_status(priv)) {
 | 
						|
		void *rx_head;
 | 
						|
 | 
						|
		netdev_dbg(priv->dev, "%s: descriptor ring:\n", __func__);
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			rx_head = (void *)rx_q->dma_erx;
 | 
						|
			desc_size = sizeof(struct dma_extended_desc);
 | 
						|
		} else {
 | 
						|
			rx_head = (void *)rx_q->dma_rx;
 | 
						|
			desc_size = sizeof(struct dma_desc);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_display_ring(priv, rx_head, priv->dma_conf.dma_rx_size, true,
 | 
						|
				    rx_q->dma_rx_phy, desc_size);
 | 
						|
	}
 | 
						|
	while (count < limit) {
 | 
						|
		unsigned int buf1_len = 0, buf2_len = 0;
 | 
						|
		enum pkt_hash_types hash_type;
 | 
						|
		struct stmmac_rx_buffer *buf;
 | 
						|
		struct dma_desc *np, *p;
 | 
						|
		int entry;
 | 
						|
		u32 hash;
 | 
						|
 | 
						|
		if (!count && rx_q->state_saved) {
 | 
						|
			skb = rx_q->state.skb;
 | 
						|
			error = rx_q->state.error;
 | 
						|
			len = rx_q->state.len;
 | 
						|
		} else {
 | 
						|
			rx_q->state_saved = false;
 | 
						|
			skb = NULL;
 | 
						|
			error = 0;
 | 
						|
			len = 0;
 | 
						|
		}
 | 
						|
 | 
						|
read_again:
 | 
						|
		if ((count >= limit - 1) && limit > 1)
 | 
						|
			break;
 | 
						|
 | 
						|
		buf1_len = 0;
 | 
						|
		buf2_len = 0;
 | 
						|
		entry = next_entry;
 | 
						|
		buf = &rx_q->buf_pool[entry];
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			p = (struct dma_desc *)(rx_q->dma_erx + entry);
 | 
						|
		else
 | 
						|
			p = rx_q->dma_rx + entry;
 | 
						|
 | 
						|
		/* read the status of the incoming frame */
 | 
						|
		status = stmmac_rx_status(priv, &priv->dev->stats,
 | 
						|
				&priv->xstats, p);
 | 
						|
		/* check if managed by the DMA otherwise go ahead */
 | 
						|
		if (unlikely(status & dma_own))
 | 
						|
			break;
 | 
						|
 | 
						|
		rx_q->cur_rx = STMMAC_GET_ENTRY(rx_q->cur_rx,
 | 
						|
						priv->dma_conf.dma_rx_size);
 | 
						|
		next_entry = rx_q->cur_rx;
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			np = (struct dma_desc *)(rx_q->dma_erx + next_entry);
 | 
						|
		else
 | 
						|
			np = rx_q->dma_rx + next_entry;
 | 
						|
 | 
						|
		prefetch(np);
 | 
						|
 | 
						|
		if (priv->extend_desc)
 | 
						|
			stmmac_rx_extended_status(priv, &priv->dev->stats,
 | 
						|
					&priv->xstats, rx_q->dma_erx + entry);
 | 
						|
		if (unlikely(status == discard_frame)) {
 | 
						|
			page_pool_recycle_direct(rx_q->page_pool, buf->page);
 | 
						|
			buf->page = NULL;
 | 
						|
			error = 1;
 | 
						|
			if (!priv->hwts_rx_en)
 | 
						|
				priv->dev->stats.rx_errors++;
 | 
						|
		}
 | 
						|
 | 
						|
		if (unlikely(error && (status & rx_not_ls)))
 | 
						|
			goto read_again;
 | 
						|
		if (unlikely(error)) {
 | 
						|
			dev_kfree_skb(skb);
 | 
						|
			skb = NULL;
 | 
						|
			count++;
 | 
						|
			continue;
 | 
						|
		}
 | 
						|
 | 
						|
		/* Buffer is good. Go on. */
 | 
						|
 | 
						|
		prefetch(page_address(buf->page) + buf->page_offset);
 | 
						|
		if (buf->sec_page)
 | 
						|
			prefetch(page_address(buf->sec_page));
 | 
						|
 | 
						|
		buf1_len = stmmac_rx_buf1_len(priv, p, status, len);
 | 
						|
		len += buf1_len;
 | 
						|
		buf2_len = stmmac_rx_buf2_len(priv, p, status, len);
 | 
						|
		len += buf2_len;
 | 
						|
 | 
						|
		/* ACS is disabled; strip manually. */
 | 
						|
		if (likely(!(status & rx_not_ls))) {
 | 
						|
			if (buf2_len) {
 | 
						|
				buf2_len -= ETH_FCS_LEN;
 | 
						|
				len -= ETH_FCS_LEN;
 | 
						|
			} else if (buf1_len) {
 | 
						|
				buf1_len -= ETH_FCS_LEN;
 | 
						|
				len -= ETH_FCS_LEN;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (!skb) {
 | 
						|
			unsigned int pre_len, sync_len;
 | 
						|
 | 
						|
			dma_sync_single_for_cpu(priv->device, buf->addr,
 | 
						|
						buf1_len, dma_dir);
 | 
						|
 | 
						|
			xdp_init_buff(&xdp, buf_sz, &rx_q->xdp_rxq);
 | 
						|
			xdp_prepare_buff(&xdp, page_address(buf->page),
 | 
						|
					 buf->page_offset, buf1_len, false);
 | 
						|
 | 
						|
			pre_len = xdp.data_end - xdp.data_hard_start -
 | 
						|
				  buf->page_offset;
 | 
						|
			skb = stmmac_xdp_run_prog(priv, &xdp);
 | 
						|
			/* Due xdp_adjust_tail: DMA sync for_device
 | 
						|
			 * cover max len CPU touch
 | 
						|
			 */
 | 
						|
			sync_len = xdp.data_end - xdp.data_hard_start -
 | 
						|
				   buf->page_offset;
 | 
						|
			sync_len = max(sync_len, pre_len);
 | 
						|
 | 
						|
			/* For Not XDP_PASS verdict */
 | 
						|
			if (IS_ERR(skb)) {
 | 
						|
				unsigned int xdp_res = -PTR_ERR(skb);
 | 
						|
 | 
						|
				if (xdp_res & STMMAC_XDP_CONSUMED) {
 | 
						|
					page_pool_put_page(rx_q->page_pool,
 | 
						|
							   virt_to_head_page(xdp.data),
 | 
						|
							   sync_len, true);
 | 
						|
					buf->page = NULL;
 | 
						|
					priv->dev->stats.rx_dropped++;
 | 
						|
 | 
						|
					/* Clear skb as it was set as
 | 
						|
					 * status by XDP program.
 | 
						|
					 */
 | 
						|
					skb = NULL;
 | 
						|
 | 
						|
					if (unlikely((status & rx_not_ls)))
 | 
						|
						goto read_again;
 | 
						|
 | 
						|
					count++;
 | 
						|
					continue;
 | 
						|
				} else if (xdp_res & (STMMAC_XDP_TX |
 | 
						|
						      STMMAC_XDP_REDIRECT)) {
 | 
						|
					xdp_status |= xdp_res;
 | 
						|
					buf->page = NULL;
 | 
						|
					skb = NULL;
 | 
						|
					count++;
 | 
						|
					continue;
 | 
						|
				}
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if (!skb) {
 | 
						|
			/* XDP program may expand or reduce tail */
 | 
						|
			buf1_len = xdp.data_end - xdp.data;
 | 
						|
 | 
						|
			skb = napi_alloc_skb(&ch->rx_napi, buf1_len);
 | 
						|
			if (!skb) {
 | 
						|
				priv->dev->stats.rx_dropped++;
 | 
						|
				count++;
 | 
						|
				goto drain_data;
 | 
						|
			}
 | 
						|
 | 
						|
			/* XDP program may adjust header */
 | 
						|
			skb_copy_to_linear_data(skb, xdp.data, buf1_len);
 | 
						|
			skb_put(skb, buf1_len);
 | 
						|
 | 
						|
			/* Data payload copied into SKB, page ready for recycle */
 | 
						|
			page_pool_recycle_direct(rx_q->page_pool, buf->page);
 | 
						|
			buf->page = NULL;
 | 
						|
		} else if (buf1_len) {
 | 
						|
			dma_sync_single_for_cpu(priv->device, buf->addr,
 | 
						|
						buf1_len, dma_dir);
 | 
						|
			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
 | 
						|
					buf->page, buf->page_offset, buf1_len,
 | 
						|
					priv->dma_conf.dma_buf_sz);
 | 
						|
 | 
						|
			/* Data payload appended into SKB */
 | 
						|
			page_pool_release_page(rx_q->page_pool, buf->page);
 | 
						|
			buf->page = NULL;
 | 
						|
		}
 | 
						|
 | 
						|
		if (buf2_len) {
 | 
						|
			dma_sync_single_for_cpu(priv->device, buf->sec_addr,
 | 
						|
						buf2_len, dma_dir);
 | 
						|
			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
 | 
						|
					buf->sec_page, 0, buf2_len,
 | 
						|
					priv->dma_conf.dma_buf_sz);
 | 
						|
 | 
						|
			/* Data payload appended into SKB */
 | 
						|
			page_pool_release_page(rx_q->page_pool, buf->sec_page);
 | 
						|
			buf->sec_page = NULL;
 | 
						|
		}
 | 
						|
 | 
						|
drain_data:
 | 
						|
		if (likely(status & rx_not_ls))
 | 
						|
			goto read_again;
 | 
						|
		if (!skb)
 | 
						|
			continue;
 | 
						|
 | 
						|
		/* Got entire packet into SKB. Finish it. */
 | 
						|
 | 
						|
		stmmac_get_rx_hwtstamp(priv, p, np, skb);
 | 
						|
		stmmac_rx_vlan(priv->dev, skb);
 | 
						|
		skb->protocol = eth_type_trans(skb, priv->dev);
 | 
						|
 | 
						|
		if (unlikely(!coe))
 | 
						|
			skb_checksum_none_assert(skb);
 | 
						|
		else
 | 
						|
			skb->ip_summed = CHECKSUM_UNNECESSARY;
 | 
						|
 | 
						|
		if (!stmmac_get_rx_hash(priv, p, &hash, &hash_type))
 | 
						|
			skb_set_hash(skb, hash, hash_type);
 | 
						|
 | 
						|
		skb_record_rx_queue(skb, queue);
 | 
						|
		napi_gro_receive(&ch->rx_napi, skb);
 | 
						|
		skb = NULL;
 | 
						|
 | 
						|
		priv->dev->stats.rx_packets++;
 | 
						|
		priv->dev->stats.rx_bytes += len;
 | 
						|
		count++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (status & rx_not_ls || skb) {
 | 
						|
		rx_q->state_saved = true;
 | 
						|
		rx_q->state.skb = skb;
 | 
						|
		rx_q->state.error = error;
 | 
						|
		rx_q->state.len = len;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_finalize_xdp_rx(priv, xdp_status);
 | 
						|
 | 
						|
	stmmac_rx_refill(priv, queue);
 | 
						|
 | 
						|
	priv->xstats.rx_pkt_n += count;
 | 
						|
	priv->xstats.rxq_stats[queue].rx_pkt_n += count;
 | 
						|
 | 
						|
	return count;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_napi_poll_rx(struct napi_struct *napi, int budget)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch =
 | 
						|
		container_of(napi, struct stmmac_channel, rx_napi);
 | 
						|
	struct stmmac_priv *priv = ch->priv_data;
 | 
						|
	u32 chan = ch->index;
 | 
						|
	int work_done;
 | 
						|
 | 
						|
	priv->xstats.napi_poll++;
 | 
						|
 | 
						|
	work_done = stmmac_rx(priv, budget, chan);
 | 
						|
	if (work_done < budget && napi_complete_done(napi, work_done)) {
 | 
						|
		unsigned long flags;
 | 
						|
 | 
						|
		spin_lock_irqsave(&ch->lock, flags);
 | 
						|
		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 0);
 | 
						|
		spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
	}
 | 
						|
 | 
						|
	return work_done;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_napi_poll_tx(struct napi_struct *napi, int budget)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch =
 | 
						|
		container_of(napi, struct stmmac_channel, tx_napi);
 | 
						|
	struct stmmac_priv *priv = ch->priv_data;
 | 
						|
	u32 chan = ch->index;
 | 
						|
	int work_done;
 | 
						|
 | 
						|
	priv->xstats.napi_poll++;
 | 
						|
 | 
						|
	work_done = stmmac_tx_clean(priv, budget, chan);
 | 
						|
	work_done = min(work_done, budget);
 | 
						|
 | 
						|
	if (work_done < budget && napi_complete_done(napi, work_done)) {
 | 
						|
		unsigned long flags;
 | 
						|
 | 
						|
		spin_lock_irqsave(&ch->lock, flags);
 | 
						|
		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 0, 1);
 | 
						|
		spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
	}
 | 
						|
 | 
						|
	return work_done;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch =
 | 
						|
		container_of(napi, struct stmmac_channel, rxtx_napi);
 | 
						|
	struct stmmac_priv *priv = ch->priv_data;
 | 
						|
	int rx_done, tx_done, rxtx_done;
 | 
						|
	u32 chan = ch->index;
 | 
						|
 | 
						|
	priv->xstats.napi_poll++;
 | 
						|
 | 
						|
	tx_done = stmmac_tx_clean(priv, budget, chan);
 | 
						|
	tx_done = min(tx_done, budget);
 | 
						|
 | 
						|
	rx_done = stmmac_rx_zc(priv, budget, chan);
 | 
						|
 | 
						|
	rxtx_done = max(tx_done, rx_done);
 | 
						|
 | 
						|
	/* If either TX or RX work is not complete, return budget
 | 
						|
	 * and keep pooling
 | 
						|
	 */
 | 
						|
	if (rxtx_done >= budget)
 | 
						|
		return budget;
 | 
						|
 | 
						|
	/* all work done, exit the polling mode */
 | 
						|
	if (napi_complete_done(napi, rxtx_done)) {
 | 
						|
		unsigned long flags;
 | 
						|
 | 
						|
		spin_lock_irqsave(&ch->lock, flags);
 | 
						|
		/* Both RX and TX work done are compelte,
 | 
						|
		 * so enable both RX & TX IRQs.
 | 
						|
		 */
 | 
						|
		stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
 | 
						|
		spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
	}
 | 
						|
 | 
						|
	return min(rxtx_done, budget - 1);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_tx_timeout
 | 
						|
 *  @dev : Pointer to net device structure
 | 
						|
 *  @txqueue: the index of the hanging transmit queue
 | 
						|
 *  Description: this function is called when a packet transmission fails to
 | 
						|
 *   complete within a reasonable time. The driver will mark the error in the
 | 
						|
 *   netdev structure and arrange for the device to be reset to a sane state
 | 
						|
 *   in order to transmit a new packet.
 | 
						|
 */
 | 
						|
static void stmmac_tx_timeout(struct net_device *dev, unsigned int txqueue)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	stmmac_global_err(priv);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_set_rx_mode - entry point for multicast addressing
 | 
						|
 *  @dev : pointer to the device structure
 | 
						|
 *  Description:
 | 
						|
 *  This function is a driver entry point which gets called by the kernel
 | 
						|
 *  whenever multicast addresses must be enabled/disabled.
 | 
						|
 *  Return value:
 | 
						|
 *  void.
 | 
						|
 */
 | 
						|
static void stmmac_set_rx_mode(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	stmmac_set_filter(priv, priv->hw, dev);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_change_mtu - entry point to change MTU size for the device.
 | 
						|
 *  @dev : device pointer.
 | 
						|
 *  @new_mtu : the new MTU size for the device.
 | 
						|
 *  Description: the Maximum Transfer Unit (MTU) is used by the network layer
 | 
						|
 *  to drive packet transmission. Ethernet has an MTU of 1500 octets
 | 
						|
 *  (ETH_DATA_LEN). This value can be changed with ifconfig.
 | 
						|
 *  Return value:
 | 
						|
 *  0 on success and an appropriate (-)ve integer as defined in errno.h
 | 
						|
 *  file on failure.
 | 
						|
 */
 | 
						|
static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int txfifosz = priv->plat->tx_fifo_size;
 | 
						|
	struct stmmac_dma_conf *dma_conf;
 | 
						|
	const int mtu = new_mtu;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (txfifosz == 0)
 | 
						|
		txfifosz = priv->dma_cap.tx_fifo_size;
 | 
						|
 | 
						|
	txfifosz /= priv->plat->tx_queues_to_use;
 | 
						|
 | 
						|
	if (stmmac_xdp_is_enabled(priv) && new_mtu > ETH_DATA_LEN) {
 | 
						|
		netdev_dbg(priv->dev, "Jumbo frames not supported for XDP\n");
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
 | 
						|
	new_mtu = STMMAC_ALIGN(new_mtu);
 | 
						|
 | 
						|
	/* If condition true, FIFO is too small or MTU too large */
 | 
						|
	if ((txfifosz < new_mtu) || (new_mtu > BUF_SIZE_16KiB))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (netif_running(dev)) {
 | 
						|
		netdev_dbg(priv->dev, "restarting interface to change its MTU\n");
 | 
						|
		/* Try to allocate the new DMA conf with the new mtu */
 | 
						|
		dma_conf = stmmac_setup_dma_desc(priv, mtu);
 | 
						|
		if (IS_ERR(dma_conf)) {
 | 
						|
			netdev_err(priv->dev, "failed allocating new dma conf for new MTU %d\n",
 | 
						|
				   mtu);
 | 
						|
			return PTR_ERR(dma_conf);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_release(dev);
 | 
						|
 | 
						|
		ret = __stmmac_open(dev, dma_conf);
 | 
						|
		if (ret) {
 | 
						|
			free_dma_desc_resources(priv, dma_conf);
 | 
						|
			kfree(dma_conf);
 | 
						|
			netdev_err(priv->dev, "failed reopening the interface after MTU change\n");
 | 
						|
			return ret;
 | 
						|
		}
 | 
						|
 | 
						|
		kfree(dma_conf);
 | 
						|
 | 
						|
		stmmac_set_rx_mode(dev);
 | 
						|
	}
 | 
						|
 | 
						|
	dev->mtu = mtu;
 | 
						|
	netdev_update_features(dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static netdev_features_t stmmac_fix_features(struct net_device *dev,
 | 
						|
					     netdev_features_t features)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	if (priv->plat->rx_coe == STMMAC_RX_COE_NONE)
 | 
						|
		features &= ~NETIF_F_RXCSUM;
 | 
						|
 | 
						|
	if (!priv->plat->tx_coe)
 | 
						|
		features &= ~NETIF_F_CSUM_MASK;
 | 
						|
 | 
						|
	/* Some GMAC devices have a bugged Jumbo frame support that
 | 
						|
	 * needs to have the Tx COE disabled for oversized frames
 | 
						|
	 * (due to limited buffer sizes). In this case we disable
 | 
						|
	 * the TX csum insertion in the TDES and not use SF.
 | 
						|
	 */
 | 
						|
	if (priv->plat->bugged_jumbo && (dev->mtu > ETH_DATA_LEN))
 | 
						|
		features &= ~NETIF_F_CSUM_MASK;
 | 
						|
 | 
						|
	/* Disable tso if asked by ethtool */
 | 
						|
	if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
 | 
						|
		if (features & NETIF_F_TSO)
 | 
						|
			priv->tso = true;
 | 
						|
		else
 | 
						|
			priv->tso = false;
 | 
						|
	}
 | 
						|
 | 
						|
	return features;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_set_features(struct net_device *netdev,
 | 
						|
			       netdev_features_t features)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(netdev);
 | 
						|
 | 
						|
	/* Keep the COE Type in case of csum is supporting */
 | 
						|
	if (features & NETIF_F_RXCSUM)
 | 
						|
		priv->hw->rx_csum = priv->plat->rx_coe;
 | 
						|
	else
 | 
						|
		priv->hw->rx_csum = 0;
 | 
						|
	/* No check needed because rx_coe has been set before and it will be
 | 
						|
	 * fixed in case of issue.
 | 
						|
	 */
 | 
						|
	stmmac_rx_ipc(priv, priv->hw);
 | 
						|
 | 
						|
	if (priv->sph_cap) {
 | 
						|
		bool sph_en = (priv->hw->rx_csum > 0) && priv->sph;
 | 
						|
		u32 chan;
 | 
						|
 | 
						|
		for (chan = 0; chan < priv->plat->rx_queues_to_use; chan++)
 | 
						|
			stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_fpe_event_status(struct stmmac_priv *priv, int status)
 | 
						|
{
 | 
						|
	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
 | 
						|
	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 | 
						|
	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 | 
						|
	bool *hs_enable = &fpe_cfg->hs_enable;
 | 
						|
 | 
						|
	if (status == FPE_EVENT_UNKNOWN || !*hs_enable)
 | 
						|
		return;
 | 
						|
 | 
						|
	/* If LP has sent verify mPacket, LP is FPE capable */
 | 
						|
	if ((status & FPE_EVENT_RVER) == FPE_EVENT_RVER) {
 | 
						|
		if (*lp_state < FPE_STATE_CAPABLE)
 | 
						|
			*lp_state = FPE_STATE_CAPABLE;
 | 
						|
 | 
						|
		/* If user has requested FPE enable, quickly response */
 | 
						|
		if (*hs_enable)
 | 
						|
			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
 | 
						|
						fpe_cfg,
 | 
						|
						MPACKET_RESPONSE);
 | 
						|
	}
 | 
						|
 | 
						|
	/* If Local has sent verify mPacket, Local is FPE capable */
 | 
						|
	if ((status & FPE_EVENT_TVER) == FPE_EVENT_TVER) {
 | 
						|
		if (*lo_state < FPE_STATE_CAPABLE)
 | 
						|
			*lo_state = FPE_STATE_CAPABLE;
 | 
						|
	}
 | 
						|
 | 
						|
	/* If LP has sent response mPacket, LP is entering FPE ON */
 | 
						|
	if ((status & FPE_EVENT_RRSP) == FPE_EVENT_RRSP)
 | 
						|
		*lp_state = FPE_STATE_ENTERING_ON;
 | 
						|
 | 
						|
	/* If Local has sent response mPacket, Local is entering FPE ON */
 | 
						|
	if ((status & FPE_EVENT_TRSP) == FPE_EVENT_TRSP)
 | 
						|
		*lo_state = FPE_STATE_ENTERING_ON;
 | 
						|
 | 
						|
	if (!test_bit(__FPE_REMOVING, &priv->fpe_task_state) &&
 | 
						|
	    !test_and_set_bit(__FPE_TASK_SCHED, &priv->fpe_task_state) &&
 | 
						|
	    priv->fpe_wq) {
 | 
						|
		queue_work(priv->fpe_wq, &priv->fpe_task);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_common_interrupt(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queues_count;
 | 
						|
	u32 queue;
 | 
						|
	bool xmac;
 | 
						|
 | 
						|
	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 | 
						|
	queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
 | 
						|
 | 
						|
	if (priv->irq_wake)
 | 
						|
		pm_wakeup_event(priv->device, 0);
 | 
						|
 | 
						|
	if (priv->dma_cap.estsel)
 | 
						|
		stmmac_est_irq_status(priv, priv->ioaddr, priv->dev,
 | 
						|
				      &priv->xstats, tx_cnt);
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel) {
 | 
						|
		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
 | 
						|
						   priv->dev);
 | 
						|
 | 
						|
		stmmac_fpe_event_status(priv, status);
 | 
						|
	}
 | 
						|
 | 
						|
	/* To handle GMAC own interrupts */
 | 
						|
	if ((priv->plat->has_gmac) || xmac) {
 | 
						|
		int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
 | 
						|
 | 
						|
		if (unlikely(status)) {
 | 
						|
			/* For LPI we need to save the tx status */
 | 
						|
			if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE)
 | 
						|
				priv->tx_path_in_lpi_mode = true;
 | 
						|
			if (status & CORE_IRQ_TX_PATH_EXIT_LPI_MODE)
 | 
						|
				priv->tx_path_in_lpi_mode = false;
 | 
						|
		}
 | 
						|
 | 
						|
		for (queue = 0; queue < queues_count; queue++) {
 | 
						|
			status = stmmac_host_mtl_irq_status(priv, priv->hw,
 | 
						|
							    queue);
 | 
						|
		}
 | 
						|
 | 
						|
		/* PCS link status */
 | 
						|
		if (priv->hw->pcs) {
 | 
						|
			if (priv->xstats.pcs_link)
 | 
						|
				netif_carrier_on(priv->dev);
 | 
						|
			else
 | 
						|
				netif_carrier_off(priv->dev);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_timestamp_interrupt(priv, priv);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_interrupt - main ISR
 | 
						|
 *  @irq: interrupt number.
 | 
						|
 *  @dev_id: to pass the net device pointer.
 | 
						|
 *  Description: this is the main driver interrupt service routine.
 | 
						|
 *  It can call:
 | 
						|
 *  o DMA service routine (to manage incoming frame reception and transmission
 | 
						|
 *    status)
 | 
						|
 *  o Core interrupts to manage: remote wake-up, management counter, LPI
 | 
						|
 *    interrupts.
 | 
						|
 */
 | 
						|
static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct net_device *dev = (struct net_device *)dev_id;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	/* Check if adapter is up */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	/* Check if a fatal error happened */
 | 
						|
	if (stmmac_safety_feat_interrupt(priv))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	/* To handle Common interrupts */
 | 
						|
	stmmac_common_interrupt(priv);
 | 
						|
 | 
						|
	/* To handle DMA interrupts */
 | 
						|
	stmmac_dma_interrupt(priv);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct net_device *dev = (struct net_device *)dev_id;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	/* Check if adapter is up */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	/* To handle Common interrupts */
 | 
						|
	stmmac_common_interrupt(priv);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
 | 
						|
{
 | 
						|
	struct net_device *dev = (struct net_device *)dev_id;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	/* Check if adapter is up */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	/* Check if a fatal error happened */
 | 
						|
	stmmac_safety_feat_interrupt(priv);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
 | 
						|
	struct stmmac_dma_conf *dma_conf;
 | 
						|
	int chan = tx_q->queue_index;
 | 
						|
	struct stmmac_priv *priv;
 | 
						|
	int status;
 | 
						|
 | 
						|
	dma_conf = container_of(tx_q, struct stmmac_dma_conf, tx_queue[chan]);
 | 
						|
	priv = container_of(dma_conf, struct stmmac_priv, dma_conf);
 | 
						|
 | 
						|
	/* Check if adapter is up */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	status = stmmac_napi_check(priv, chan, DMA_DIR_TX);
 | 
						|
 | 
						|
	if (unlikely(status & tx_hard_error_bump_tc)) {
 | 
						|
		/* Try to bump up the dma threshold on this failure */
 | 
						|
		stmmac_bump_dma_threshold(priv, chan);
 | 
						|
	} else if (unlikely(status == tx_hard_error)) {
 | 
						|
		stmmac_tx_err(priv, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
 | 
						|
	struct stmmac_dma_conf *dma_conf;
 | 
						|
	int chan = rx_q->queue_index;
 | 
						|
	struct stmmac_priv *priv;
 | 
						|
 | 
						|
	dma_conf = container_of(rx_q, struct stmmac_dma_conf, rx_queue[chan]);
 | 
						|
	priv = container_of(dma_conf, struct stmmac_priv, dma_conf);
 | 
						|
 | 
						|
	/* Check if adapter is up */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return IRQ_HANDLED;
 | 
						|
 | 
						|
	stmmac_napi_check(priv, chan, DMA_DIR_RX);
 | 
						|
 | 
						|
	return IRQ_HANDLED;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_NET_POLL_CONTROLLER
 | 
						|
/* Polling receive - used by NETCONSOLE and other diagnostic tools
 | 
						|
 * to allow network I/O with interrupts disabled.
 | 
						|
 */
 | 
						|
static void stmmac_poll_controller(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* If adapter is down, do nothing */
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return;
 | 
						|
 | 
						|
	if (priv->plat->multi_msi_en) {
 | 
						|
		for (i = 0; i < priv->plat->rx_queues_to_use; i++)
 | 
						|
			stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
 | 
						|
 | 
						|
		for (i = 0; i < priv->plat->tx_queues_to_use; i++)
 | 
						|
			stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
 | 
						|
	} else {
 | 
						|
		disable_irq(dev->irq);
 | 
						|
		stmmac_interrupt(dev->irq, dev);
 | 
						|
		enable_irq(dev->irq);
 | 
						|
	}
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_ioctl - Entry point for the Ioctl
 | 
						|
 *  @dev: Device pointer.
 | 
						|
 *  @rq: An IOCTL specefic structure, that can contain a pointer to
 | 
						|
 *  a proprietary structure used to pass information to the driver.
 | 
						|
 *  @cmd: IOCTL command
 | 
						|
 *  Description:
 | 
						|
 *  Currently it supports the phy_mii_ioctl(...) and HW time stamping.
 | 
						|
 */
 | 
						|
static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv (dev);
 | 
						|
	int ret = -EOPNOTSUPP;
 | 
						|
 | 
						|
	if (!netif_running(dev))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	switch (cmd) {
 | 
						|
	case SIOCGMIIPHY:
 | 
						|
	case SIOCGMIIREG:
 | 
						|
	case SIOCSMIIREG:
 | 
						|
		ret = phylink_mii_ioctl(priv->phylink, rq, cmd);
 | 
						|
		break;
 | 
						|
	case SIOCSHWTSTAMP:
 | 
						|
		ret = stmmac_hwtstamp_set(dev, rq);
 | 
						|
		break;
 | 
						|
	case SIOCGHWTSTAMP:
 | 
						|
		ret = stmmac_hwtstamp_get(dev, rq);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_setup_tc_block_cb(enum tc_setup_type type, void *type_data,
 | 
						|
				    void *cb_priv)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = cb_priv;
 | 
						|
	int ret = -EOPNOTSUPP;
 | 
						|
 | 
						|
	if (!tc_cls_can_offload_and_chain0(priv->dev, type_data))
 | 
						|
		return ret;
 | 
						|
 | 
						|
	__stmmac_disable_all_queues(priv);
 | 
						|
 | 
						|
	switch (type) {
 | 
						|
	case TC_SETUP_CLSU32:
 | 
						|
		ret = stmmac_tc_setup_cls_u32(priv, priv, type_data);
 | 
						|
		break;
 | 
						|
	case TC_SETUP_CLSFLOWER:
 | 
						|
		ret = stmmac_tc_setup_cls(priv, priv, type_data);
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_enable_all_queues(priv);
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static LIST_HEAD(stmmac_block_cb_list);
 | 
						|
 | 
						|
static int stmmac_setup_tc(struct net_device *ndev, enum tc_setup_type type,
 | 
						|
			   void *type_data)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
 | 
						|
	switch (type) {
 | 
						|
	case TC_SETUP_BLOCK:
 | 
						|
		return flow_block_cb_setup_simple(type_data,
 | 
						|
						  &stmmac_block_cb_list,
 | 
						|
						  stmmac_setup_tc_block_cb,
 | 
						|
						  priv, priv, true);
 | 
						|
	case TC_SETUP_QDISC_CBS:
 | 
						|
		return stmmac_tc_setup_cbs(priv, priv, type_data);
 | 
						|
	case TC_SETUP_QDISC_TAPRIO:
 | 
						|
		return stmmac_tc_setup_taprio(priv, priv, type_data);
 | 
						|
	case TC_SETUP_QDISC_ETF:
 | 
						|
		return stmmac_tc_setup_etf(priv, priv, type_data);
 | 
						|
	default:
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static u16 stmmac_select_queue(struct net_device *dev, struct sk_buff *skb,
 | 
						|
			       struct net_device *sb_dev)
 | 
						|
{
 | 
						|
	int gso = skb_shinfo(skb)->gso_type;
 | 
						|
 | 
						|
	if (gso & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6 | SKB_GSO_UDP_L4)) {
 | 
						|
		/*
 | 
						|
		 * There is no way to determine the number of TSO/USO
 | 
						|
		 * capable Queues. Let's use always the Queue 0
 | 
						|
		 * because if TSO/USO is supported then at least this
 | 
						|
		 * one will be capable.
 | 
						|
		 */
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	return netdev_pick_tx(dev, skb, NULL) % dev->real_num_tx_queues;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_set_mac_address(struct net_device *ndev, void *addr)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	ret = pm_runtime_resume_and_get(priv->device);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = eth_mac_addr(ndev, addr);
 | 
						|
	if (ret)
 | 
						|
		goto set_mac_error;
 | 
						|
 | 
						|
	stmmac_set_umac_addr(priv, priv->hw, ndev->dev_addr, 0);
 | 
						|
 | 
						|
set_mac_error:
 | 
						|
	pm_runtime_put(priv->device);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
static struct dentry *stmmac_fs_dir;
 | 
						|
 | 
						|
static void sysfs_display_ring(void *head, int size, int extend_desc,
 | 
						|
			       struct seq_file *seq, dma_addr_t dma_phy_addr)
 | 
						|
{
 | 
						|
	int i;
 | 
						|
	struct dma_extended_desc *ep = (struct dma_extended_desc *)head;
 | 
						|
	struct dma_desc *p = (struct dma_desc *)head;
 | 
						|
	dma_addr_t dma_addr;
 | 
						|
 | 
						|
	for (i = 0; i < size; i++) {
 | 
						|
		if (extend_desc) {
 | 
						|
			dma_addr = dma_phy_addr + i * sizeof(*ep);
 | 
						|
			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
 | 
						|
				   i, &dma_addr,
 | 
						|
				   le32_to_cpu(ep->basic.des0),
 | 
						|
				   le32_to_cpu(ep->basic.des1),
 | 
						|
				   le32_to_cpu(ep->basic.des2),
 | 
						|
				   le32_to_cpu(ep->basic.des3));
 | 
						|
			ep++;
 | 
						|
		} else {
 | 
						|
			dma_addr = dma_phy_addr + i * sizeof(*p);
 | 
						|
			seq_printf(seq, "%d [%pad]: 0x%x 0x%x 0x%x 0x%x\n",
 | 
						|
				   i, &dma_addr,
 | 
						|
				   le32_to_cpu(p->des0), le32_to_cpu(p->des1),
 | 
						|
				   le32_to_cpu(p->des2), le32_to_cpu(p->des3));
 | 
						|
			p++;
 | 
						|
		}
 | 
						|
		seq_printf(seq, "\n");
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_rings_status_show(struct seq_file *seq, void *v)
 | 
						|
{
 | 
						|
	struct net_device *dev = seq->private;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 rx_count = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_count = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	if ((dev->flags & IFF_UP) == 0)
 | 
						|
		return 0;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_count; queue++) {
 | 
						|
		struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
 | 
						|
		seq_printf(seq, "RX Queue %d:\n", queue);
 | 
						|
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			seq_printf(seq, "Extended descriptor ring:\n");
 | 
						|
			sysfs_display_ring((void *)rx_q->dma_erx,
 | 
						|
					   priv->dma_conf.dma_rx_size, 1, seq, rx_q->dma_rx_phy);
 | 
						|
		} else {
 | 
						|
			seq_printf(seq, "Descriptor ring:\n");
 | 
						|
			sysfs_display_ring((void *)rx_q->dma_rx,
 | 
						|
					   priv->dma_conf.dma_rx_size, 0, seq, rx_q->dma_rx_phy);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_count; queue++) {
 | 
						|
		struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
 | 
						|
		seq_printf(seq, "TX Queue %d:\n", queue);
 | 
						|
 | 
						|
		if (priv->extend_desc) {
 | 
						|
			seq_printf(seq, "Extended descriptor ring:\n");
 | 
						|
			sysfs_display_ring((void *)tx_q->dma_etx,
 | 
						|
					   priv->dma_conf.dma_tx_size, 1, seq, tx_q->dma_tx_phy);
 | 
						|
		} else if (!(tx_q->tbs & STMMAC_TBS_AVAIL)) {
 | 
						|
			seq_printf(seq, "Descriptor ring:\n");
 | 
						|
			sysfs_display_ring((void *)tx_q->dma_tx,
 | 
						|
					   priv->dma_conf.dma_tx_size, 0, seq, tx_q->dma_tx_phy);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
DEFINE_SHOW_ATTRIBUTE(stmmac_rings_status);
 | 
						|
 | 
						|
static int stmmac_dma_cap_show(struct seq_file *seq, void *v)
 | 
						|
{
 | 
						|
	struct net_device *dev = seq->private;
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	if (!priv->hw_cap_support) {
 | 
						|
		seq_printf(seq, "DMA HW features not supported\n");
 | 
						|
		return 0;
 | 
						|
	}
 | 
						|
 | 
						|
	seq_printf(seq, "==============================\n");
 | 
						|
	seq_printf(seq, "\tDMA HW features\n");
 | 
						|
	seq_printf(seq, "==============================\n");
 | 
						|
 | 
						|
	seq_printf(seq, "\t10/100 Mbps: %s\n",
 | 
						|
		   (priv->dma_cap.mbps_10_100) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\t1000 Mbps: %s\n",
 | 
						|
		   (priv->dma_cap.mbps_1000) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tHalf duplex: %s\n",
 | 
						|
		   (priv->dma_cap.half_duplex) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tHash Filter: %s\n",
 | 
						|
		   (priv->dma_cap.hash_filter) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tMultiple MAC address registers: %s\n",
 | 
						|
		   (priv->dma_cap.multi_addr) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tPCS (TBI/SGMII/RTBI PHY interfaces): %s\n",
 | 
						|
		   (priv->dma_cap.pcs) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tSMA (MDIO) Interface: %s\n",
 | 
						|
		   (priv->dma_cap.sma_mdio) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tPMT Remote wake up: %s\n",
 | 
						|
		   (priv->dma_cap.pmt_remote_wake_up) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tPMT Magic Frame: %s\n",
 | 
						|
		   (priv->dma_cap.pmt_magic_frame) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tRMON module: %s\n",
 | 
						|
		   (priv->dma_cap.rmon) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tIEEE 1588-2002 Time Stamp: %s\n",
 | 
						|
		   (priv->dma_cap.time_stamp) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tIEEE 1588-2008 Advanced Time Stamp: %s\n",
 | 
						|
		   (priv->dma_cap.atime_stamp) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\t802.3az - Energy-Efficient Ethernet (EEE): %s\n",
 | 
						|
		   (priv->dma_cap.eee) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tAV features: %s\n", (priv->dma_cap.av) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tChecksum Offload in TX: %s\n",
 | 
						|
		   (priv->dma_cap.tx_coe) ? "Y" : "N");
 | 
						|
	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
 | 
						|
		seq_printf(seq, "\tIP Checksum Offload in RX: %s\n",
 | 
						|
			   (priv->dma_cap.rx_coe) ? "Y" : "N");
 | 
						|
	} else {
 | 
						|
		seq_printf(seq, "\tIP Checksum Offload (type1) in RX: %s\n",
 | 
						|
			   (priv->dma_cap.rx_coe_type1) ? "Y" : "N");
 | 
						|
		seq_printf(seq, "\tIP Checksum Offload (type2) in RX: %s\n",
 | 
						|
			   (priv->dma_cap.rx_coe_type2) ? "Y" : "N");
 | 
						|
	}
 | 
						|
	seq_printf(seq, "\tRXFIFO > 2048bytes: %s\n",
 | 
						|
		   (priv->dma_cap.rxfifo_over_2048) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tNumber of Additional RX channel: %d\n",
 | 
						|
		   priv->dma_cap.number_rx_channel);
 | 
						|
	seq_printf(seq, "\tNumber of Additional TX channel: %d\n",
 | 
						|
		   priv->dma_cap.number_tx_channel);
 | 
						|
	seq_printf(seq, "\tNumber of Additional RX queues: %d\n",
 | 
						|
		   priv->dma_cap.number_rx_queues);
 | 
						|
	seq_printf(seq, "\tNumber of Additional TX queues: %d\n",
 | 
						|
		   priv->dma_cap.number_tx_queues);
 | 
						|
	seq_printf(seq, "\tEnhanced descriptors: %s\n",
 | 
						|
		   (priv->dma_cap.enh_desc) ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tTX Fifo Size: %d\n", priv->dma_cap.tx_fifo_size);
 | 
						|
	seq_printf(seq, "\tRX Fifo Size: %d\n", priv->dma_cap.rx_fifo_size);
 | 
						|
	seq_printf(seq, "\tHash Table Size: %d\n", priv->dma_cap.hash_tb_sz);
 | 
						|
	seq_printf(seq, "\tTSO: %s\n", priv->dma_cap.tsoen ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tNumber of PPS Outputs: %d\n",
 | 
						|
		   priv->dma_cap.pps_out_num);
 | 
						|
	seq_printf(seq, "\tSafety Features: %s\n",
 | 
						|
		   priv->dma_cap.asp ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tFlexible RX Parser: %s\n",
 | 
						|
		   priv->dma_cap.frpsel ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tEnhanced Addressing: %d\n",
 | 
						|
		   priv->dma_cap.host_dma_width);
 | 
						|
	seq_printf(seq, "\tReceive Side Scaling: %s\n",
 | 
						|
		   priv->dma_cap.rssen ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tVLAN Hash Filtering: %s\n",
 | 
						|
		   priv->dma_cap.vlhash ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tSplit Header: %s\n",
 | 
						|
		   priv->dma_cap.sphen ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tVLAN TX Insertion: %s\n",
 | 
						|
		   priv->dma_cap.vlins ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tDouble VLAN: %s\n",
 | 
						|
		   priv->dma_cap.dvlan ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tNumber of L3/L4 Filters: %d\n",
 | 
						|
		   priv->dma_cap.l3l4fnum);
 | 
						|
	seq_printf(seq, "\tARP Offloading: %s\n",
 | 
						|
		   priv->dma_cap.arpoffsel ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tEnhancements to Scheduled Traffic (EST): %s\n",
 | 
						|
		   priv->dma_cap.estsel ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tFrame Preemption (FPE): %s\n",
 | 
						|
		   priv->dma_cap.fpesel ? "Y" : "N");
 | 
						|
	seq_printf(seq, "\tTime-Based Scheduling (TBS): %s\n",
 | 
						|
		   priv->dma_cap.tbssel ? "Y" : "N");
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
DEFINE_SHOW_ATTRIBUTE(stmmac_dma_cap);
 | 
						|
 | 
						|
/* Use network device events to rename debugfs file entries.
 | 
						|
 */
 | 
						|
static int stmmac_device_event(struct notifier_block *unused,
 | 
						|
			       unsigned long event, void *ptr)
 | 
						|
{
 | 
						|
	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	if (dev->netdev_ops != &stmmac_netdev_ops)
 | 
						|
		goto done;
 | 
						|
 | 
						|
	switch (event) {
 | 
						|
	case NETDEV_CHANGENAME:
 | 
						|
		if (priv->dbgfs_dir)
 | 
						|
			priv->dbgfs_dir = debugfs_rename(stmmac_fs_dir,
 | 
						|
							 priv->dbgfs_dir,
 | 
						|
							 stmmac_fs_dir,
 | 
						|
							 dev->name);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
done:
 | 
						|
	return NOTIFY_DONE;
 | 
						|
}
 | 
						|
 | 
						|
static struct notifier_block stmmac_notifier = {
 | 
						|
	.notifier_call = stmmac_device_event,
 | 
						|
};
 | 
						|
 | 
						|
static void stmmac_init_fs(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	rtnl_lock();
 | 
						|
 | 
						|
	/* Create per netdev entries */
 | 
						|
	priv->dbgfs_dir = debugfs_create_dir(dev->name, stmmac_fs_dir);
 | 
						|
 | 
						|
	/* Entry to report DMA RX/TX rings */
 | 
						|
	debugfs_create_file("descriptors_status", 0444, priv->dbgfs_dir, dev,
 | 
						|
			    &stmmac_rings_status_fops);
 | 
						|
 | 
						|
	/* Entry to report the DMA HW features */
 | 
						|
	debugfs_create_file("dma_cap", 0444, priv->dbgfs_dir, dev,
 | 
						|
			    &stmmac_dma_cap_fops);
 | 
						|
 | 
						|
	rtnl_unlock();
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_exit_fs(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	debugfs_remove_recursive(priv->dbgfs_dir);
 | 
						|
}
 | 
						|
#endif /* CONFIG_DEBUG_FS */
 | 
						|
 | 
						|
static u32 stmmac_vid_crc32_le(__le16 vid_le)
 | 
						|
{
 | 
						|
	unsigned char *data = (unsigned char *)&vid_le;
 | 
						|
	unsigned char data_byte = 0;
 | 
						|
	u32 crc = ~0x0;
 | 
						|
	u32 temp = 0;
 | 
						|
	int i, bits;
 | 
						|
 | 
						|
	bits = get_bitmask_order(VLAN_VID_MASK);
 | 
						|
	for (i = 0; i < bits; i++) {
 | 
						|
		if ((i % 8) == 0)
 | 
						|
			data_byte = data[i / 8];
 | 
						|
 | 
						|
		temp = ((crc & 1) ^ data_byte) & 1;
 | 
						|
		crc >>= 1;
 | 
						|
		data_byte >>= 1;
 | 
						|
 | 
						|
		if (temp)
 | 
						|
			crc ^= 0xedb88320;
 | 
						|
	}
 | 
						|
 | 
						|
	return crc;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_vlan_update(struct stmmac_priv *priv, bool is_double)
 | 
						|
{
 | 
						|
	u32 crc, hash = 0;
 | 
						|
	__le16 pmatch = 0;
 | 
						|
	int count = 0;
 | 
						|
	u16 vid = 0;
 | 
						|
 | 
						|
	for_each_set_bit(vid, priv->active_vlans, VLAN_N_VID) {
 | 
						|
		__le16 vid_le = cpu_to_le16(vid);
 | 
						|
		crc = bitrev32(~stmmac_vid_crc32_le(vid_le)) >> 28;
 | 
						|
		hash |= (1 << crc);
 | 
						|
		count++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (!priv->dma_cap.vlhash) {
 | 
						|
		if (count > 2) /* VID = 0 always passes filter */
 | 
						|
			return -EOPNOTSUPP;
 | 
						|
 | 
						|
		pmatch = cpu_to_le16(vid);
 | 
						|
		hash = 0;
 | 
						|
	}
 | 
						|
 | 
						|
	return stmmac_update_vlan_hash(priv, priv->hw, hash, pmatch, is_double);
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_vlan_rx_add_vid(struct net_device *ndev, __be16 proto, u16 vid)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
	bool is_double = false;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = pm_runtime_resume_and_get(priv->device);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (be16_to_cpu(proto) == ETH_P_8021AD)
 | 
						|
		is_double = true;
 | 
						|
 | 
						|
	set_bit(vid, priv->active_vlans);
 | 
						|
	ret = stmmac_vlan_update(priv, is_double);
 | 
						|
	if (ret) {
 | 
						|
		clear_bit(vid, priv->active_vlans);
 | 
						|
		goto err_pm_put;
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->hw->num_vlan) {
 | 
						|
		ret = stmmac_add_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 | 
						|
		if (ret)
 | 
						|
			goto err_pm_put;
 | 
						|
	}
 | 
						|
err_pm_put:
 | 
						|
	pm_runtime_put(priv->device);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_vlan_rx_kill_vid(struct net_device *ndev, __be16 proto, u16 vid)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
	bool is_double = false;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = pm_runtime_resume_and_get(priv->device);
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	if (be16_to_cpu(proto) == ETH_P_8021AD)
 | 
						|
		is_double = true;
 | 
						|
 | 
						|
	clear_bit(vid, priv->active_vlans);
 | 
						|
 | 
						|
	if (priv->hw->num_vlan) {
 | 
						|
		ret = stmmac_del_hw_vlan_rx_fltr(priv, ndev, priv->hw, proto, vid);
 | 
						|
		if (ret)
 | 
						|
			goto del_vlan_error;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = stmmac_vlan_update(priv, is_double);
 | 
						|
 | 
						|
del_vlan_error:
 | 
						|
	pm_runtime_put(priv->device);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_bpf(struct net_device *dev, struct netdev_bpf *bpf)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
 | 
						|
	switch (bpf->command) {
 | 
						|
	case XDP_SETUP_PROG:
 | 
						|
		return stmmac_xdp_set_prog(priv, bpf->prog, bpf->extack);
 | 
						|
	case XDP_SETUP_XSK_POOL:
 | 
						|
		return stmmac_xdp_setup_pool(priv, bpf->xsk.pool,
 | 
						|
					     bpf->xsk.queue_id);
 | 
						|
	default:
 | 
						|
		return -EOPNOTSUPP;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int stmmac_xdp_xmit(struct net_device *dev, int num_frames,
 | 
						|
			   struct xdp_frame **frames, u32 flags)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int cpu = smp_processor_id();
 | 
						|
	struct netdev_queue *nq;
 | 
						|
	int i, nxmit = 0;
 | 
						|
	int queue;
 | 
						|
 | 
						|
	if (unlikely(test_bit(STMMAC_DOWN, &priv->state)))
 | 
						|
		return -ENETDOWN;
 | 
						|
 | 
						|
	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	queue = stmmac_xdp_get_tx_queue(priv, cpu);
 | 
						|
	nq = netdev_get_tx_queue(priv->dev, queue);
 | 
						|
 | 
						|
	__netif_tx_lock(nq, cpu);
 | 
						|
	/* Avoids TX time-out as we are sharing with slow path */
 | 
						|
	txq_trans_cond_update(nq);
 | 
						|
 | 
						|
	for (i = 0; i < num_frames; i++) {
 | 
						|
		int res;
 | 
						|
 | 
						|
		res = stmmac_xdp_xmit_xdpf(priv, queue, frames[i], true);
 | 
						|
		if (res == STMMAC_XDP_CONSUMED)
 | 
						|
			break;
 | 
						|
 | 
						|
		nxmit++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (flags & XDP_XMIT_FLUSH) {
 | 
						|
		stmmac_flush_tx_descriptors(priv, queue);
 | 
						|
		stmmac_tx_timer_arm(priv, queue);
 | 
						|
	}
 | 
						|
 | 
						|
	__netif_tx_unlock(nq);
 | 
						|
 | 
						|
	return nxmit;
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_disable_rx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ch->lock, flags);
 | 
						|
	stmmac_disable_dma_irq(priv, priv->ioaddr, queue, 1, 0);
 | 
						|
	spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
 | 
						|
	stmmac_stop_rx_dma(priv, queue);
 | 
						|
	__free_dma_rx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_enable_rx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned long flags;
 | 
						|
	u32 buf_size;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = __alloc_dma_rx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
	if (ret) {
 | 
						|
		netdev_err(priv->dev, "Failed to alloc RX desc.\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = __init_dma_rx_desc_rings(priv, &priv->dma_conf, queue, GFP_KERNEL);
 | 
						|
	if (ret) {
 | 
						|
		__free_dma_rx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
		netdev_err(priv->dev, "Failed to init RX desc.\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_reset_rx_queue(priv, queue);
 | 
						|
	stmmac_clear_rx_descriptors(priv, &priv->dma_conf, queue);
 | 
						|
 | 
						|
	stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
			    rx_q->dma_rx_phy, rx_q->queue_index);
 | 
						|
 | 
						|
	rx_q->rx_tail_addr = rx_q->dma_rx_phy + (rx_q->buf_alloc_num *
 | 
						|
			     sizeof(struct dma_desc));
 | 
						|
	stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
 | 
						|
			       rx_q->rx_tail_addr, rx_q->queue_index);
 | 
						|
 | 
						|
	if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
 | 
						|
		buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
 | 
						|
		stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
				      buf_size,
 | 
						|
				      rx_q->queue_index);
 | 
						|
	} else {
 | 
						|
		stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
				      priv->dma_conf.dma_buf_sz,
 | 
						|
				      rx_q->queue_index);
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_start_rx_dma(priv, queue);
 | 
						|
 | 
						|
	spin_lock_irqsave(&ch->lock, flags);
 | 
						|
	stmmac_enable_dma_irq(priv, priv->ioaddr, queue, 1, 0);
 | 
						|
	spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_disable_tx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned long flags;
 | 
						|
 | 
						|
	spin_lock_irqsave(&ch->lock, flags);
 | 
						|
	stmmac_disable_dma_irq(priv, priv->ioaddr, queue, 0, 1);
 | 
						|
	spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
 | 
						|
	stmmac_stop_tx_dma(priv, queue);
 | 
						|
	__free_dma_tx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_enable_tx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
	unsigned long flags;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = __alloc_dma_tx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
	if (ret) {
 | 
						|
		netdev_err(priv->dev, "Failed to alloc TX desc.\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = __init_dma_tx_desc_rings(priv,  &priv->dma_conf, queue);
 | 
						|
	if (ret) {
 | 
						|
		__free_dma_tx_desc_resources(priv, &priv->dma_conf, queue);
 | 
						|
		netdev_err(priv->dev, "Failed to init TX desc.\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_reset_tx_queue(priv, queue);
 | 
						|
	stmmac_clear_tx_descriptors(priv, &priv->dma_conf, queue);
 | 
						|
 | 
						|
	stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
			    tx_q->dma_tx_phy, tx_q->queue_index);
 | 
						|
 | 
						|
	if (tx_q->tbs & STMMAC_TBS_AVAIL)
 | 
						|
		stmmac_enable_tbs(priv, priv->ioaddr, 1, tx_q->queue_index);
 | 
						|
 | 
						|
	tx_q->tx_tail_addr = tx_q->dma_tx_phy;
 | 
						|
	stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
 | 
						|
			       tx_q->tx_tail_addr, tx_q->queue_index);
 | 
						|
 | 
						|
	stmmac_start_tx_dma(priv, queue);
 | 
						|
 | 
						|
	spin_lock_irqsave(&ch->lock, flags);
 | 
						|
	stmmac_enable_dma_irq(priv, priv->ioaddr, queue, 0, 1);
 | 
						|
	spin_unlock_irqrestore(&ch->lock, flags);
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_xdp_release(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	/* Ensure tx function is not running */
 | 
						|
	netif_tx_disable(dev);
 | 
						|
 | 
						|
	/* Disable NAPI process */
 | 
						|
	stmmac_disable_all_queues(priv);
 | 
						|
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 | 
						|
		hrtimer_cancel(&priv->dma_conf.tx_queue[chan].txtimer);
 | 
						|
 | 
						|
	/* Free the IRQ lines */
 | 
						|
	stmmac_free_irq(dev, REQ_IRQ_ERR_ALL, 0);
 | 
						|
 | 
						|
	/* Stop TX/RX DMA channels */
 | 
						|
	stmmac_stop_all_dma(priv);
 | 
						|
 | 
						|
	/* Release and free the Rx/Tx resources */
 | 
						|
	free_dma_desc_resources(priv, &priv->dma_conf);
 | 
						|
 | 
						|
	/* Disable the MAC Rx/Tx */
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, false);
 | 
						|
 | 
						|
	/* set trans_start so we don't get spurious
 | 
						|
	 * watchdogs during reset
 | 
						|
	 */
 | 
						|
	netif_trans_update(dev);
 | 
						|
	netif_carrier_off(dev);
 | 
						|
}
 | 
						|
 | 
						|
int stmmac_xdp_open(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 rx_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 dma_csr_ch = max(rx_cnt, tx_cnt);
 | 
						|
	struct stmmac_rx_queue *rx_q;
 | 
						|
	struct stmmac_tx_queue *tx_q;
 | 
						|
	u32 buf_size;
 | 
						|
	bool sph_en;
 | 
						|
	u32 chan;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	ret = alloc_dma_desc_resources(priv, &priv->dma_conf);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(dev, "%s: DMA descriptors allocation failed\n",
 | 
						|
			   __func__);
 | 
						|
		goto dma_desc_error;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = init_dma_desc_rings(dev, &priv->dma_conf, GFP_KERNEL);
 | 
						|
	if (ret < 0) {
 | 
						|
		netdev_err(dev, "%s: DMA descriptors initialization failed\n",
 | 
						|
			   __func__);
 | 
						|
		goto init_error;
 | 
						|
	}
 | 
						|
 | 
						|
	stmmac_reset_queues_param(priv);
 | 
						|
 | 
						|
	/* DMA CSR Channel configuration */
 | 
						|
	for (chan = 0; chan < dma_csr_ch; chan++) {
 | 
						|
		stmmac_init_chan(priv, priv->ioaddr, priv->plat->dma_cfg, chan);
 | 
						|
		stmmac_disable_dma_irq(priv, priv->ioaddr, chan, 1, 1);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Adjust Split header */
 | 
						|
	sph_en = (priv->hw->rx_csum > 0) && priv->sph;
 | 
						|
 | 
						|
	/* DMA RX Channel Configuration */
 | 
						|
	for (chan = 0; chan < rx_cnt; chan++) {
 | 
						|
		rx_q = &priv->dma_conf.rx_queue[chan];
 | 
						|
 | 
						|
		stmmac_init_rx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
				    rx_q->dma_rx_phy, chan);
 | 
						|
 | 
						|
		rx_q->rx_tail_addr = rx_q->dma_rx_phy +
 | 
						|
				     (rx_q->buf_alloc_num *
 | 
						|
				      sizeof(struct dma_desc));
 | 
						|
		stmmac_set_rx_tail_ptr(priv, priv->ioaddr,
 | 
						|
				       rx_q->rx_tail_addr, chan);
 | 
						|
 | 
						|
		if (rx_q->xsk_pool && rx_q->buf_alloc_num) {
 | 
						|
			buf_size = xsk_pool_get_rx_frame_size(rx_q->xsk_pool);
 | 
						|
			stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
					      buf_size,
 | 
						|
					      rx_q->queue_index);
 | 
						|
		} else {
 | 
						|
			stmmac_set_dma_bfsize(priv, priv->ioaddr,
 | 
						|
					      priv->dma_conf.dma_buf_sz,
 | 
						|
					      rx_q->queue_index);
 | 
						|
		}
 | 
						|
 | 
						|
		stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
 | 
						|
	}
 | 
						|
 | 
						|
	/* DMA TX Channel Configuration */
 | 
						|
	for (chan = 0; chan < tx_cnt; chan++) {
 | 
						|
		tx_q = &priv->dma_conf.tx_queue[chan];
 | 
						|
 | 
						|
		stmmac_init_tx_chan(priv, priv->ioaddr, priv->plat->dma_cfg,
 | 
						|
				    tx_q->dma_tx_phy, chan);
 | 
						|
 | 
						|
		tx_q->tx_tail_addr = tx_q->dma_tx_phy;
 | 
						|
		stmmac_set_tx_tail_ptr(priv, priv->ioaddr,
 | 
						|
				       tx_q->tx_tail_addr, chan);
 | 
						|
 | 
						|
		hrtimer_init(&tx_q->txtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 | 
						|
		tx_q->txtimer.function = stmmac_tx_timer;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Enable the MAC Rx/Tx */
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, true);
 | 
						|
 | 
						|
	/* Start Rx & Tx DMA Channels */
 | 
						|
	stmmac_start_all_dma(priv);
 | 
						|
 | 
						|
	ret = stmmac_request_irq(dev);
 | 
						|
	if (ret)
 | 
						|
		goto irq_error;
 | 
						|
 | 
						|
	/* Enable NAPI process*/
 | 
						|
	stmmac_enable_all_queues(priv);
 | 
						|
	netif_carrier_on(dev);
 | 
						|
	netif_tx_start_all_queues(dev);
 | 
						|
	stmmac_enable_all_dma_irq(priv);
 | 
						|
 | 
						|
	return 0;
 | 
						|
 | 
						|
irq_error:
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 | 
						|
		hrtimer_cancel(&priv->dma_conf.tx_queue[chan].txtimer);
 | 
						|
 | 
						|
	stmmac_hw_teardown(dev);
 | 
						|
init_error:
 | 
						|
	free_dma_desc_resources(priv, &priv->dma_conf);
 | 
						|
dma_desc_error:
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
int stmmac_xsk_wakeup(struct net_device *dev, u32 queue, u32 flags)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	struct stmmac_rx_queue *rx_q;
 | 
						|
	struct stmmac_tx_queue *tx_q;
 | 
						|
	struct stmmac_channel *ch;
 | 
						|
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state) ||
 | 
						|
	    !netif_carrier_ok(priv->dev))
 | 
						|
		return -ENETDOWN;
 | 
						|
 | 
						|
	if (!stmmac_xdp_is_enabled(priv))
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (queue >= priv->plat->rx_queues_to_use ||
 | 
						|
	    queue >= priv->plat->tx_queues_to_use)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
	tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
	ch = &priv->channel[queue];
 | 
						|
 | 
						|
	if (!rx_q->xsk_pool && !tx_q->xsk_pool)
 | 
						|
		return -EINVAL;
 | 
						|
 | 
						|
	if (!napi_if_scheduled_mark_missed(&ch->rxtx_napi)) {
 | 
						|
		/* EQoS does not have per-DMA channel SW interrupt,
 | 
						|
		 * so we schedule RX Napi straight-away.
 | 
						|
		 */
 | 
						|
		if (likely(napi_schedule_prep(&ch->rxtx_napi)))
 | 
						|
			__napi_schedule(&ch->rxtx_napi);
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct net_device_ops stmmac_netdev_ops = {
 | 
						|
	.ndo_open = stmmac_open,
 | 
						|
	.ndo_start_xmit = stmmac_xmit,
 | 
						|
	.ndo_stop = stmmac_release,
 | 
						|
	.ndo_change_mtu = stmmac_change_mtu,
 | 
						|
	.ndo_fix_features = stmmac_fix_features,
 | 
						|
	.ndo_set_features = stmmac_set_features,
 | 
						|
	.ndo_set_rx_mode = stmmac_set_rx_mode,
 | 
						|
	.ndo_tx_timeout = stmmac_tx_timeout,
 | 
						|
	.ndo_eth_ioctl = stmmac_ioctl,
 | 
						|
	.ndo_setup_tc = stmmac_setup_tc,
 | 
						|
	.ndo_select_queue = stmmac_select_queue,
 | 
						|
#ifdef CONFIG_NET_POLL_CONTROLLER
 | 
						|
	.ndo_poll_controller = stmmac_poll_controller,
 | 
						|
#endif
 | 
						|
	.ndo_set_mac_address = stmmac_set_mac_address,
 | 
						|
	.ndo_vlan_rx_add_vid = stmmac_vlan_rx_add_vid,
 | 
						|
	.ndo_vlan_rx_kill_vid = stmmac_vlan_rx_kill_vid,
 | 
						|
	.ndo_bpf = stmmac_bpf,
 | 
						|
	.ndo_xdp_xmit = stmmac_xdp_xmit,
 | 
						|
	.ndo_xsk_wakeup = stmmac_xsk_wakeup,
 | 
						|
};
 | 
						|
 | 
						|
static void stmmac_reset_subtask(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	if (!test_and_clear_bit(STMMAC_RESET_REQUESTED, &priv->state))
 | 
						|
		return;
 | 
						|
	if (test_bit(STMMAC_DOWN, &priv->state))
 | 
						|
		return;
 | 
						|
 | 
						|
	netdev_err(priv->dev, "Reset adapter.\n");
 | 
						|
 | 
						|
	rtnl_lock();
 | 
						|
	netif_trans_update(priv->dev);
 | 
						|
	while (test_and_set_bit(STMMAC_RESETING, &priv->state))
 | 
						|
		usleep_range(1000, 2000);
 | 
						|
 | 
						|
	set_bit(STMMAC_DOWN, &priv->state);
 | 
						|
	dev_close(priv->dev);
 | 
						|
	dev_open(priv->dev, NULL);
 | 
						|
	clear_bit(STMMAC_DOWN, &priv->state);
 | 
						|
	clear_bit(STMMAC_RESETING, &priv->state);
 | 
						|
	rtnl_unlock();
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_service_task(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
 | 
						|
			service_task);
 | 
						|
 | 
						|
	stmmac_reset_subtask(priv);
 | 
						|
	clear_bit(STMMAC_SERVICE_SCHED, &priv->state);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 *  stmmac_hw_init - Init the MAC device
 | 
						|
 *  @priv: driver private structure
 | 
						|
 *  Description: this function is to configure the MAC device according to
 | 
						|
 *  some platform parameters or the HW capability register. It prepares the
 | 
						|
 *  driver to use either ring or chain modes and to setup either enhanced or
 | 
						|
 *  normal descriptors.
 | 
						|
 */
 | 
						|
static int stmmac_hw_init(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
 | 
						|
	/* dwmac-sun8i only work in chain mode */
 | 
						|
	if (priv->plat->has_sun8i)
 | 
						|
		chain_mode = 1;
 | 
						|
	priv->chain_mode = chain_mode;
 | 
						|
 | 
						|
	/* Initialize HW Interface */
 | 
						|
	ret = stmmac_hwif_init(priv);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	/* Get the HW capability (new GMAC newer than 3.50a) */
 | 
						|
	priv->hw_cap_support = stmmac_get_hw_features(priv);
 | 
						|
	if (priv->hw_cap_support) {
 | 
						|
		dev_info(priv->device, "DMA HW capability register supported\n");
 | 
						|
 | 
						|
		/* We can override some gmac/dma configuration fields: e.g.
 | 
						|
		 * enh_desc, tx_coe (e.g. that are passed through the
 | 
						|
		 * platform) with the values from the HW capability
 | 
						|
		 * register (if supported).
 | 
						|
		 */
 | 
						|
		priv->plat->enh_desc = priv->dma_cap.enh_desc;
 | 
						|
		priv->plat->pmt = priv->dma_cap.pmt_remote_wake_up &&
 | 
						|
				!priv->plat->use_phy_wol;
 | 
						|
		priv->hw->pmt = priv->plat->pmt;
 | 
						|
		if (priv->dma_cap.hash_tb_sz) {
 | 
						|
			priv->hw->multicast_filter_bins =
 | 
						|
					(BIT(priv->dma_cap.hash_tb_sz) << 5);
 | 
						|
			priv->hw->mcast_bits_log2 =
 | 
						|
					ilog2(priv->hw->multicast_filter_bins);
 | 
						|
		}
 | 
						|
 | 
						|
		/* TXCOE doesn't work in thresh DMA mode */
 | 
						|
		if (priv->plat->force_thresh_dma_mode)
 | 
						|
			priv->plat->tx_coe = 0;
 | 
						|
		else
 | 
						|
			priv->plat->tx_coe = priv->dma_cap.tx_coe;
 | 
						|
 | 
						|
		/* In case of GMAC4 rx_coe is from HW cap register. */
 | 
						|
		priv->plat->rx_coe = priv->dma_cap.rx_coe;
 | 
						|
 | 
						|
		if (priv->dma_cap.rx_coe_type2)
 | 
						|
			priv->plat->rx_coe = STMMAC_RX_COE_TYPE2;
 | 
						|
		else if (priv->dma_cap.rx_coe_type1)
 | 
						|
			priv->plat->rx_coe = STMMAC_RX_COE_TYPE1;
 | 
						|
 | 
						|
	} else {
 | 
						|
		dev_info(priv->device, "No HW DMA feature register supported\n");
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->rx_coe) {
 | 
						|
		priv->hw->rx_csum = priv->plat->rx_coe;
 | 
						|
		dev_info(priv->device, "RX Checksum Offload Engine supported\n");
 | 
						|
		if (priv->synopsys_id < DWMAC_CORE_4_00)
 | 
						|
			dev_info(priv->device, "COE Type %d\n", priv->hw->rx_csum);
 | 
						|
	}
 | 
						|
	if (priv->plat->tx_coe)
 | 
						|
		dev_info(priv->device, "TX Checksum insertion supported\n");
 | 
						|
 | 
						|
	if (priv->plat->pmt) {
 | 
						|
		dev_info(priv->device, "Wake-Up On Lan supported\n");
 | 
						|
		device_set_wakeup_capable(priv->device, 1);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->dma_cap.tsoen)
 | 
						|
		dev_info(priv->device, "TSO supported\n");
 | 
						|
 | 
						|
	priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
 | 
						|
	priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
 | 
						|
 | 
						|
	/* Run HW quirks, if any */
 | 
						|
	if (priv->hwif_quirks) {
 | 
						|
		ret = priv->hwif_quirks(priv);
 | 
						|
		if (ret)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Rx Watchdog is available in the COREs newer than the 3.40.
 | 
						|
	 * In some case, for example on bugged HW this feature
 | 
						|
	 * has to be disable and this can be done by passing the
 | 
						|
	 * riwt_off field from the platform.
 | 
						|
	 */
 | 
						|
	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
 | 
						|
	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
 | 
						|
		priv->use_riwt = 1;
 | 
						|
		dev_info(priv->device,
 | 
						|
			 "Enable RX Mitigation via HW Watchdog Timer\n");
 | 
						|
	}
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_napi_add(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 queue, maxq;
 | 
						|
 | 
						|
	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
 | 
						|
 | 
						|
	for (queue = 0; queue < maxq; queue++) {
 | 
						|
		struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
		int rx_budget = ((priv->plat->dma_rx_size < NAPI_POLL_WEIGHT) &&
 | 
						|
				 (priv->plat->dma_rx_size > 0)) ?
 | 
						|
				 priv->plat->dma_rx_size : NAPI_POLL_WEIGHT;
 | 
						|
		int tx_budget = ((priv->plat->dma_tx_size < NAPI_POLL_WEIGHT) &&
 | 
						|
				 (priv->plat->dma_tx_size > 0)) ?
 | 
						|
				 priv->plat->dma_tx_size : NAPI_POLL_WEIGHT;
 | 
						|
		int budget = min(rx_budget, tx_budget);
 | 
						|
 | 
						|
		ch->priv_data = priv;
 | 
						|
		ch->index = queue;
 | 
						|
		spin_lock_init(&ch->lock);
 | 
						|
 | 
						|
		if (queue < priv->plat->rx_queues_to_use) {
 | 
						|
			netif_napi_add_weight(dev, &ch->rx_napi,
 | 
						|
					      stmmac_napi_poll_rx, rx_budget);
 | 
						|
		}
 | 
						|
		if (queue < priv->plat->tx_queues_to_use) {
 | 
						|
			netif_napi_add_tx_weight(dev, &ch->tx_napi,
 | 
						|
						 stmmac_napi_poll_tx, tx_budget);
 | 
						|
		}
 | 
						|
		if (queue < priv->plat->rx_queues_to_use &&
 | 
						|
		    queue < priv->plat->tx_queues_to_use) {
 | 
						|
			netif_napi_add_weight(dev, &ch->rxtx_napi,
 | 
						|
					      stmmac_napi_poll_rxtx, budget);
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_napi_del(struct net_device *dev)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	u32 queue, maxq;
 | 
						|
 | 
						|
	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
 | 
						|
 | 
						|
	for (queue = 0; queue < maxq; queue++) {
 | 
						|
		struct stmmac_channel *ch = &priv->channel[queue];
 | 
						|
 | 
						|
		if (queue < priv->plat->rx_queues_to_use)
 | 
						|
			netif_napi_del(&ch->rx_napi);
 | 
						|
		if (queue < priv->plat->tx_queues_to_use)
 | 
						|
			netif_napi_del(&ch->tx_napi);
 | 
						|
		if (queue < priv->plat->rx_queues_to_use &&
 | 
						|
		    queue < priv->plat->tx_queues_to_use) {
 | 
						|
			netif_napi_del(&ch->rxtx_napi);
 | 
						|
		}
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int ret = 0, i;
 | 
						|
 | 
						|
	if (netif_running(dev))
 | 
						|
		stmmac_release(dev);
 | 
						|
 | 
						|
	stmmac_napi_del(dev);
 | 
						|
 | 
						|
	priv->plat->rx_queues_to_use = rx_cnt;
 | 
						|
	priv->plat->tx_queues_to_use = tx_cnt;
 | 
						|
	if (!netif_is_rxfh_configured(dev))
 | 
						|
		for (i = 0; i < ARRAY_SIZE(priv->rss.table); i++)
 | 
						|
			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
 | 
						|
									rx_cnt);
 | 
						|
 | 
						|
	stmmac_napi_add(dev);
 | 
						|
 | 
						|
	if (netif_running(dev))
 | 
						|
		ret = stmmac_open(dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = netdev_priv(dev);
 | 
						|
	int ret = 0;
 | 
						|
 | 
						|
	if (netif_running(dev))
 | 
						|
		stmmac_release(dev);
 | 
						|
 | 
						|
	priv->dma_conf.dma_rx_size = rx_size;
 | 
						|
	priv->dma_conf.dma_tx_size = tx_size;
 | 
						|
 | 
						|
	if (netif_running(dev))
 | 
						|
		ret = stmmac_open(dev);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
#define SEND_VERIFY_MPAKCET_FMT "Send Verify mPacket lo_state=%d lp_state=%d\n"
 | 
						|
static void stmmac_fpe_lp_task(struct work_struct *work)
 | 
						|
{
 | 
						|
	struct stmmac_priv *priv = container_of(work, struct stmmac_priv,
 | 
						|
						fpe_task);
 | 
						|
	struct stmmac_fpe_cfg *fpe_cfg = priv->plat->fpe_cfg;
 | 
						|
	enum stmmac_fpe_state *lo_state = &fpe_cfg->lo_fpe_state;
 | 
						|
	enum stmmac_fpe_state *lp_state = &fpe_cfg->lp_fpe_state;
 | 
						|
	bool *hs_enable = &fpe_cfg->hs_enable;
 | 
						|
	bool *enable = &fpe_cfg->enable;
 | 
						|
	int retries = 20;
 | 
						|
 | 
						|
	while (retries-- > 0) {
 | 
						|
		/* Bail out immediately if FPE handshake is OFF */
 | 
						|
		if (*lo_state == FPE_STATE_OFF || !*hs_enable)
 | 
						|
			break;
 | 
						|
 | 
						|
		if (*lo_state == FPE_STATE_ENTERING_ON &&
 | 
						|
		    *lp_state == FPE_STATE_ENTERING_ON) {
 | 
						|
			stmmac_fpe_configure(priv, priv->ioaddr,
 | 
						|
					     fpe_cfg,
 | 
						|
					     priv->plat->tx_queues_to_use,
 | 
						|
					     priv->plat->rx_queues_to_use,
 | 
						|
					     *enable);
 | 
						|
 | 
						|
			netdev_info(priv->dev, "configured FPE\n");
 | 
						|
 | 
						|
			*lo_state = FPE_STATE_ON;
 | 
						|
			*lp_state = FPE_STATE_ON;
 | 
						|
			netdev_info(priv->dev, "!!! BOTH FPE stations ON\n");
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if ((*lo_state == FPE_STATE_CAPABLE ||
 | 
						|
		     *lo_state == FPE_STATE_ENTERING_ON) &&
 | 
						|
		     *lp_state != FPE_STATE_ON) {
 | 
						|
			netdev_info(priv->dev, SEND_VERIFY_MPAKCET_FMT,
 | 
						|
				    *lo_state, *lp_state);
 | 
						|
			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
 | 
						|
						fpe_cfg,
 | 
						|
						MPACKET_VERIFY);
 | 
						|
		}
 | 
						|
		/* Sleep then retry */
 | 
						|
		msleep(500);
 | 
						|
	}
 | 
						|
 | 
						|
	clear_bit(__FPE_TASK_SCHED, &priv->fpe_task_state);
 | 
						|
}
 | 
						|
 | 
						|
void stmmac_fpe_handshake(struct stmmac_priv *priv, bool enable)
 | 
						|
{
 | 
						|
	if (priv->plat->fpe_cfg->hs_enable != enable) {
 | 
						|
		if (enable) {
 | 
						|
			stmmac_fpe_send_mpacket(priv, priv->ioaddr,
 | 
						|
						priv->plat->fpe_cfg,
 | 
						|
						MPACKET_VERIFY);
 | 
						|
		} else {
 | 
						|
			priv->plat->fpe_cfg->lo_fpe_state = FPE_STATE_OFF;
 | 
						|
			priv->plat->fpe_cfg->lp_fpe_state = FPE_STATE_OFF;
 | 
						|
		}
 | 
						|
 | 
						|
		priv->plat->fpe_cfg->hs_enable = enable;
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
#ifdef LED_FIX 
 | 
						|
static int phy_dp83848_led_fixup(struct phy_device *phydev)
 | 
						|
{
 | 
						|
        int value;
 | 
						|
 | 
						|
	if (phydev->phy_id != DP_83848_PHY_ID)
 | 
						|
		return 0;
 | 
						|
 | 
						|
        printk("%s in\n", __func__);
 | 
						|
 | 
						|
	value = phy_read(phydev, 0x18);
 | 
						|
	value &= ~(1<<2);
 | 
						|
	phy_write(phydev, 0x18, value);
 | 
						|
 | 
						|
	value = phy_read(phydev, 0x19);
 | 
						|
	value &= ~(1<<5);
 | 
						|
	phy_write(phydev, 0x19, value);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int phy_rtl8201f_led_fixup(struct phy_device *phydev)
 | 
						|
{
 | 
						|
	int value;
 | 
						|
 | 
						|
	printk("%s in\n", __func__);
 | 
						|
 | 
						|
	/* switch to page 7 */
 | 
						|
	value = phy_read(phydev, 31);
 | 
						|
	value &= 0xff00;
 | 
						|
	value |= 0x0007;
 | 
						|
	value = phy_write(phydev, 31, value);
 | 
						|
 | 
						|
	/* set customized led enable */
 | 
						|
	value = phy_read(phydev, 19);
 | 
						|
	value |= (0x1<<3);
 | 
						|
	phy_write(phydev, 19, value);
 | 
						|
 | 
						|
	value &= 0x0000;
 | 
						|
	value |= (0x1<<1);
 | 
						|
	value |= (0x1<<7);
 | 
						|
	phy_write(phydev, 17, value);
 | 
						|
 | 
						|
	/* back to page 0 */
 | 
						|
	value = phy_read(phydev, 31);
 | 
						|
	value &= 0x0000;
 | 
						|
	value = phy_write(phydev, 31, value);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int phy_rtl8211e_led_fixup(struct phy_device *phydev)
 | 
						|
{
 | 
						|
	int val;
 | 
						|
 | 
						|
	printk("%s in\n", __func__);
 | 
						|
	val = phy_read(phydev, 3);
 | 
						|
	printk("%s in  val=0x%04x\n", __func__, val);
 | 
						|
 | 
						|
	/*switch to extension page44*/
 | 
						|
	phy_write(phydev, 31, 0x07);
 | 
						|
	phy_write(phydev, 30, 0x2c);
 | 
						|
 | 
						|
	/*set led1(yellow) act*/
 | 
						|
	val = phy_read(phydev, 26);
 | 
						|
	val &= (~(1<<4));// bit4=0
 | 
						|
	val |= (1<<5);// bit5=1
 | 
						|
	val &= (~(1<<6));// bit6=0
 | 
						|
	phy_write(phydev, 26, val);
 | 
						|
 | 
						|
	/*set led0(green) link*/
 | 
						|
	val = phy_read(phydev, 28);
 | 
						|
	val |= (7<<0);// bit0,1,2=1
 | 
						|
	val &= (~(7<<4));// bit4,5,6=0
 | 
						|
	val &= (~(7<<8));// bit8,9,10=0
 | 
						|
	phy_write(phydev, 28, val);
 | 
						|
 | 
						|
	/*switch back to page0*/
 | 
						|
	phy_write(phydev,31,0x00);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int phy_rtl8211f_led_fixup(struct phy_device *phydev)
 | 
						|
{
 | 
						|
	int val;
 | 
						|
 | 
						|
	printk("%s in\n", __func__);
 | 
						|
 | 
						|
	val = phy_read(phydev, 31);
 | 
						|
	printk("%s in  val=0x%04x\n", __func__, val);
 | 
						|
	
 | 
						|
	/*switch to extension page31*/
 | 
						|
	phy_write(phydev, 31, 0xd04);
 | 
						|
 | 
						|
	//phy_write(phydev, 0x10, 0x6d60);   /*led1-green led2-yellow */
 | 
						|
	phy_write(phydev, 0x10, 0xc160);   /*led1-green led2-yellow */
 | 
						|
	phy_write(phydev, 0x11, 0x8);  
 | 
						|
 | 
						|
	/*switch back to page0*/
 | 
						|
	phy_write(phydev,31,0x0);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_dvr_probe
 | 
						|
 * @device: device pointer
 | 
						|
 * @plat_dat: platform data pointer
 | 
						|
 * @res: stmmac resource pointer
 | 
						|
 * Description: this is the main probe function used to
 | 
						|
 * call the alloc_etherdev, allocate the priv structure.
 | 
						|
 * Return:
 | 
						|
 * returns 0 on success, otherwise errno.
 | 
						|
 */
 | 
						|
int stmmac_dvr_probe(struct device *device,
 | 
						|
		     struct plat_stmmacenet_data *plat_dat,
 | 
						|
		     struct stmmac_resources *res)
 | 
						|
{
 | 
						|
	struct net_device *ndev = NULL;
 | 
						|
	struct stmmac_priv *priv;
 | 
						|
	u32 rxq;
 | 
						|
	int i, ret = 0;
 | 
						|
 | 
						|
	ndev = devm_alloc_etherdev_mqs(device, sizeof(struct stmmac_priv),
 | 
						|
				       MTL_MAX_TX_QUEUES, MTL_MAX_RX_QUEUES);
 | 
						|
	if (!ndev)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	SET_NETDEV_DEV(ndev, device);
 | 
						|
 | 
						|
	priv = netdev_priv(ndev);
 | 
						|
	priv->device = device;
 | 
						|
	priv->dev = ndev;
 | 
						|
 | 
						|
	stmmac_set_ethtool_ops(ndev);
 | 
						|
	priv->pause = pause;
 | 
						|
	priv->plat = plat_dat;
 | 
						|
	priv->ioaddr = res->addr;
 | 
						|
	priv->dev->base_addr = (unsigned long)res->addr;
 | 
						|
	priv->plat->dma_cfg->multi_msi_en = priv->plat->multi_msi_en;
 | 
						|
 | 
						|
	priv->dev->irq = res->irq;
 | 
						|
	priv->wol_irq = res->wol_irq;
 | 
						|
	priv->lpi_irq = res->lpi_irq;
 | 
						|
	priv->sfty_ce_irq = res->sfty_ce_irq;
 | 
						|
	priv->sfty_ue_irq = res->sfty_ue_irq;
 | 
						|
	for (i = 0; i < MTL_MAX_RX_QUEUES; i++)
 | 
						|
		priv->rx_irq[i] = res->rx_irq[i];
 | 
						|
	for (i = 0; i < MTL_MAX_TX_QUEUES; i++)
 | 
						|
		priv->tx_irq[i] = res->tx_irq[i];
 | 
						|
 | 
						|
	if (!is_zero_ether_addr(res->mac))
 | 
						|
		eth_hw_addr_set(priv->dev, res->mac);
 | 
						|
 | 
						|
	dev_set_drvdata(device, priv->dev);
 | 
						|
 | 
						|
	/* Verify driver arguments */
 | 
						|
	stmmac_verify_args();
 | 
						|
 | 
						|
	priv->af_xdp_zc_qps = bitmap_zalloc(MTL_MAX_TX_QUEUES, GFP_KERNEL);
 | 
						|
	if (!priv->af_xdp_zc_qps)
 | 
						|
		return -ENOMEM;
 | 
						|
 | 
						|
	/* Allocate workqueue */
 | 
						|
	priv->wq = create_singlethread_workqueue("stmmac_wq");
 | 
						|
	if (!priv->wq) {
 | 
						|
		dev_err(priv->device, "failed to create workqueue\n");
 | 
						|
		ret = -ENOMEM;
 | 
						|
		goto error_wq_init;
 | 
						|
	}
 | 
						|
 | 
						|
	INIT_WORK(&priv->service_task, stmmac_service_task);
 | 
						|
 | 
						|
	/* Initialize Link Partner FPE workqueue */
 | 
						|
	INIT_WORK(&priv->fpe_task, stmmac_fpe_lp_task);
 | 
						|
 | 
						|
	/* Override with kernel parameters if supplied XXX CRS XXX
 | 
						|
	 * this needs to have multiple instances
 | 
						|
	 */
 | 
						|
	if ((phyaddr >= 0) && (phyaddr <= 31))
 | 
						|
		priv->plat->phy_addr = phyaddr;
 | 
						|
 | 
						|
	if (priv->plat->stmmac_rst) {
 | 
						|
		ret = reset_control_assert(priv->plat->stmmac_rst);
 | 
						|
		reset_control_deassert(priv->plat->stmmac_rst);
 | 
						|
		/* Some reset controllers have only reset callback instead of
 | 
						|
		 * assert + deassert callbacks pair.
 | 
						|
		 */
 | 
						|
		if (ret == -ENOTSUPP)
 | 
						|
			reset_control_reset(priv->plat->stmmac_rst);
 | 
						|
	}
 | 
						|
 | 
						|
	ret = reset_control_deassert(priv->plat->stmmac_ahb_rst);
 | 
						|
	if (ret == -ENOTSUPP)
 | 
						|
		dev_err(priv->device, "unable to bring out of ahb reset: %pe\n",
 | 
						|
			ERR_PTR(ret));
 | 
						|
 | 
						|
	/* Wait a bit for the reset to take effect */
 | 
						|
	udelay(10);
 | 
						|
 | 
						|
	/* Init MAC and get the capabilities */
 | 
						|
	ret = stmmac_hw_init(priv);
 | 
						|
	if (ret)
 | 
						|
		goto error_hw_init;
 | 
						|
 | 
						|
	/* Only DWMAC core version 5.20 onwards supports HW descriptor prefetch.
 | 
						|
	 */
 | 
						|
	if (priv->synopsys_id < DWMAC_CORE_5_20)
 | 
						|
		priv->plat->dma_cfg->dche = false;
 | 
						|
 | 
						|
	stmmac_check_ether_addr(priv);
 | 
						|
 | 
						|
	ndev->netdev_ops = &stmmac_netdev_ops;
 | 
						|
 | 
						|
	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 | 
						|
			    NETIF_F_RXCSUM;
 | 
						|
 | 
						|
	ret = stmmac_tc_init(priv, priv);
 | 
						|
	if (!ret) {
 | 
						|
		ndev->hw_features |= NETIF_F_HW_TC;
 | 
						|
	}
 | 
						|
 | 
						|
	if ((priv->plat->tso_en) && (priv->dma_cap.tsoen)) {
 | 
						|
		ndev->hw_features |= NETIF_F_TSO | NETIF_F_TSO6;
 | 
						|
		if (priv->plat->has_gmac4)
 | 
						|
			ndev->hw_features |= NETIF_F_GSO_UDP_L4;
 | 
						|
		priv->tso = true;
 | 
						|
		dev_info(priv->device, "TSO feature enabled\n");
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->dma_cap.sphen && !priv->plat->sph_disable) {
 | 
						|
		ndev->hw_features |= NETIF_F_GRO;
 | 
						|
		priv->sph_cap = true;
 | 
						|
		priv->sph = priv->sph_cap;
 | 
						|
		dev_info(priv->device, "SPH feature enabled\n");
 | 
						|
	}
 | 
						|
 | 
						|
	/* Ideally our host DMA address width is the same as for the
 | 
						|
	 * device. However, it may differ and then we have to use our
 | 
						|
	 * host DMA width for allocation and the device DMA width for
 | 
						|
	 * register handling.
 | 
						|
	 */
 | 
						|
	if (priv->plat->host_dma_width)
 | 
						|
		priv->dma_cap.host_dma_width = priv->plat->host_dma_width;
 | 
						|
	else
 | 
						|
		priv->dma_cap.host_dma_width = priv->dma_cap.addr64;
 | 
						|
 | 
						|
	if (priv->dma_cap.host_dma_width) {
 | 
						|
		ret = dma_set_mask_and_coherent(device,
 | 
						|
				DMA_BIT_MASK(priv->dma_cap.host_dma_width));
 | 
						|
		if (!ret) {
 | 
						|
			dev_info(priv->device, "Using %d/%d bits DMA host/device width\n",
 | 
						|
				 priv->dma_cap.host_dma_width, priv->dma_cap.addr64);
 | 
						|
 | 
						|
			/*
 | 
						|
			 * If more than 32 bits can be addressed, make sure to
 | 
						|
			 * enable enhanced addressing mode.
 | 
						|
			 */
 | 
						|
			if (IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT))
 | 
						|
				priv->plat->dma_cfg->eame = true;
 | 
						|
		} else {
 | 
						|
			ret = dma_set_mask_and_coherent(device, DMA_BIT_MASK(32));
 | 
						|
			if (ret) {
 | 
						|
				dev_err(priv->device, "Failed to set DMA Mask\n");
 | 
						|
				goto error_hw_init;
 | 
						|
			}
 | 
						|
 | 
						|
			priv->dma_cap.host_dma_width = 32;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA;
 | 
						|
	ndev->watchdog_timeo = msecs_to_jiffies(watchdog);
 | 
						|
#ifdef STMMAC_VLAN_TAG_USED
 | 
						|
	/* Both mac100 and gmac support receive VLAN tag detection */
 | 
						|
	ndev->features |= NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX;
 | 
						|
	if (priv->dma_cap.vlhash) {
 | 
						|
		ndev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 | 
						|
		ndev->features |= NETIF_F_HW_VLAN_STAG_FILTER;
 | 
						|
	}
 | 
						|
	if (priv->dma_cap.vlins) {
 | 
						|
		ndev->features |= NETIF_F_HW_VLAN_CTAG_TX;
 | 
						|
		if (priv->dma_cap.dvlan)
 | 
						|
			ndev->features |= NETIF_F_HW_VLAN_STAG_TX;
 | 
						|
	}
 | 
						|
#endif
 | 
						|
	priv->msg_enable = netif_msg_init(debug, default_msg_level);
 | 
						|
 | 
						|
	/* Initialize RSS */
 | 
						|
	rxq = priv->plat->rx_queues_to_use;
 | 
						|
	netdev_rss_key_fill(priv->rss.key, sizeof(priv->rss.key));
 | 
						|
	for (i = 0; i < ARRAY_SIZE(priv->rss.table); i++)
 | 
						|
		priv->rss.table[i] = ethtool_rxfh_indir_default(i, rxq);
 | 
						|
 | 
						|
	if (priv->dma_cap.rssen && priv->plat->rss_en)
 | 
						|
		ndev->features |= NETIF_F_RXHASH;
 | 
						|
 | 
						|
	/* MTU range: 46 - hw-specific max */
 | 
						|
	ndev->min_mtu = ETH_ZLEN - ETH_HLEN;
 | 
						|
	if (priv->plat->has_xgmac)
 | 
						|
		ndev->max_mtu = XGMAC_JUMBO_LEN;
 | 
						|
	else if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00))
 | 
						|
		ndev->max_mtu = JUMBO_LEN;
 | 
						|
	else
 | 
						|
		ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
 | 
						|
	/* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu
 | 
						|
	 * as well as plat->maxmtu < ndev->min_mtu which is a invalid range.
 | 
						|
	 */
 | 
						|
	if ((priv->plat->maxmtu < ndev->max_mtu) &&
 | 
						|
	    (priv->plat->maxmtu >= ndev->min_mtu))
 | 
						|
		ndev->max_mtu = priv->plat->maxmtu;
 | 
						|
	else if (priv->plat->maxmtu < ndev->min_mtu)
 | 
						|
		dev_warn(priv->device,
 | 
						|
			 "%s: warning: maxmtu having invalid value (%d)\n",
 | 
						|
			 __func__, priv->plat->maxmtu);
 | 
						|
 | 
						|
	if (flow_ctrl)
 | 
						|
		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
 | 
						|
 | 
						|
	/* Setup channels NAPI */
 | 
						|
	stmmac_napi_add(ndev);
 | 
						|
 | 
						|
	mutex_init(&priv->lock);
 | 
						|
 | 
						|
	/* If a specific clk_csr value is passed from the platform
 | 
						|
	 * this means that the CSR Clock Range selection cannot be
 | 
						|
	 * changed at run-time and it is fixed. Viceversa the driver'll try to
 | 
						|
	 * set the MDC clock dynamically according to the csr actual
 | 
						|
	 * clock input.
 | 
						|
	 */
 | 
						|
	if (priv->plat->clk_csr >= 0)
 | 
						|
		priv->clk_csr = priv->plat->clk_csr;
 | 
						|
	else
 | 
						|
		stmmac_clk_csr_set(priv);
 | 
						|
 | 
						|
	stmmac_check_pcs_mode(priv);
 | 
						|
 | 
						|
	pm_runtime_get_noresume(device);
 | 
						|
	pm_runtime_set_active(device);
 | 
						|
	if (!pm_runtime_enabled(device))
 | 
						|
		pm_runtime_enable(device);
 | 
						|
 | 
						|
	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 | 
						|
	    priv->hw->pcs != STMMAC_PCS_RTBI) {
 | 
						|
		/* MDIO bus Registration */
 | 
						|
		ret = stmmac_mdio_register(ndev);
 | 
						|
		if (ret < 0) {
 | 
						|
			dev_err_probe(priv->device, ret,
 | 
						|
				      "%s: MDIO bus (id: %d) registration failed\n",
 | 
						|
				      __func__, priv->plat->bus_id);
 | 
						|
			goto error_mdio_register;
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->speed_mode_2500)
 | 
						|
		priv->plat->speed_mode_2500(ndev, priv->plat->bsp_priv);
 | 
						|
 | 
						|
	if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) {
 | 
						|
		ret = stmmac_xpcs_setup(priv->mii);
 | 
						|
		if (ret)
 | 
						|
			goto error_xpcs_setup;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = stmmac_phy_setup(priv);
 | 
						|
	if (ret) {
 | 
						|
		netdev_err(ndev, "failed to setup phy (%d)\n", ret);
 | 
						|
		goto error_phy_setup;
 | 
						|
	}
 | 
						|
 | 
						|
	ret = register_netdev(ndev);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(priv->device, "%s: ERROR %i registering the device\n",
 | 
						|
			__func__, ret);
 | 
						|
		goto error_netdev_register;
 | 
						|
	}
 | 
						|
 | 
						|
#ifdef LED_FIX 
 | 
						|
/* register the PHY board fixup */
 | 
						|
ret = phy_register_fixup_for_uid(RTL_8211E_PHY_ID, 0xffffffff, phy_rtl8211e_led_fixup);
 | 
						|
if (ret)
 | 
						|
	pr_warn("Cannot register PHY board fixup.\n");
 | 
						|
ret = phy_register_fixup_for_uid(RTL_8211F_PHY_ID, 0xffffffff, phy_rtl8211f_led_fixup);
 | 
						|
if (ret)
 | 
						|
	pr_warn("Cannot register PHY board fixup.\n");
 | 
						|
ret = phy_register_fixup_for_uid(RTL_8201F_PHY_ID, 0xffffffff, phy_rtl8201f_led_fixup);
 | 
						|
if (ret)
 | 
						|
	pr_warn("Cannot register PHY board fixup.\n");
 | 
						|
ret = phy_register_fixup_for_uid(DP_83848_PHY_ID, 0xffffffff, phy_dp83848_led_fixup);
 | 
						|
if (ret)
 | 
						|
	pr_warn("Cannot register PHY board fixup.\n");
 | 
						|
#endif
 | 
						|
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
	stmmac_init_fs(ndev);
 | 
						|
#endif
 | 
						|
 | 
						|
	if (priv->plat->dump_debug_regs)
 | 
						|
		priv->plat->dump_debug_regs(priv->plat->bsp_priv);
 | 
						|
 | 
						|
	/* Let pm_runtime_put() disable the clocks.
 | 
						|
	 * If CONFIG_PM is not enabled, the clocks will stay powered.
 | 
						|
	 */
 | 
						|
	pm_runtime_put(device);
 | 
						|
 | 
						|
	return ret;
 | 
						|
 | 
						|
error_netdev_register:
 | 
						|
	phylink_destroy(priv->phylink);
 | 
						|
error_xpcs_setup:
 | 
						|
error_phy_setup:
 | 
						|
	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 | 
						|
	    priv->hw->pcs != STMMAC_PCS_RTBI)
 | 
						|
		stmmac_mdio_unregister(ndev);
 | 
						|
error_mdio_register:
 | 
						|
	stmmac_napi_del(ndev);
 | 
						|
error_hw_init:
 | 
						|
	destroy_workqueue(priv->wq);
 | 
						|
error_wq_init:
 | 
						|
	bitmap_free(priv->af_xdp_zc_qps);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_dvr_probe);
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_dvr_remove
 | 
						|
 * @dev: device pointer
 | 
						|
 * Description: this function resets the TX/RX processes, disables the MAC RX/TX
 | 
						|
 * changes the link status, releases the DMA descriptor rings.
 | 
						|
 */
 | 
						|
int stmmac_dvr_remove(struct device *dev)
 | 
						|
{
 | 
						|
	struct net_device *ndev = dev_get_drvdata(dev);
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
 | 
						|
	netdev_info(priv->dev, "%s: removing driver", __func__);
 | 
						|
 | 
						|
	pm_runtime_get_sync(dev);
 | 
						|
 | 
						|
	stmmac_stop_all_dma(priv);
 | 
						|
	stmmac_mac_set(priv, priv->ioaddr, false);
 | 
						|
	netif_carrier_off(ndev);
 | 
						|
	unregister_netdev(ndev);
 | 
						|
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
	stmmac_exit_fs(ndev);
 | 
						|
#endif
 | 
						|
	phylink_destroy(priv->phylink);
 | 
						|
	if (priv->plat->stmmac_rst)
 | 
						|
		reset_control_assert(priv->plat->stmmac_rst);
 | 
						|
	reset_control_assert(priv->plat->stmmac_ahb_rst);
 | 
						|
	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 | 
						|
	    priv->hw->pcs != STMMAC_PCS_RTBI)
 | 
						|
		stmmac_mdio_unregister(ndev);
 | 
						|
	destroy_workqueue(priv->wq);
 | 
						|
	mutex_destroy(&priv->lock);
 | 
						|
	bitmap_free(priv->af_xdp_zc_qps);
 | 
						|
 | 
						|
	pm_runtime_disable(dev);
 | 
						|
	pm_runtime_put_noidle(dev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_dvr_remove);
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_suspend - suspend callback
 | 
						|
 * @dev: device pointer
 | 
						|
 * Description: this is the function to suspend the device and it is called
 | 
						|
 * by the platform driver to stop the network queue, release the resources,
 | 
						|
 * program the PMT register (for WoL), clean and release driver resources.
 | 
						|
 */
 | 
						|
int stmmac_suspend(struct device *dev)
 | 
						|
{
 | 
						|
	struct net_device *ndev = dev_get_drvdata(dev);
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
	u32 chan;
 | 
						|
 | 
						|
	if (!ndev || !netif_running(ndev))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	mutex_lock(&priv->lock);
 | 
						|
 | 
						|
	netif_device_detach(ndev);
 | 
						|
 | 
						|
	stmmac_disable_all_queues(priv);
 | 
						|
 | 
						|
	for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
 | 
						|
		hrtimer_cancel(&priv->dma_conf.tx_queue[chan].txtimer);
 | 
						|
 | 
						|
	if (priv->eee_enabled) {
 | 
						|
		priv->tx_path_in_lpi_mode = false;
 | 
						|
		del_timer_sync(&priv->eee_ctrl_timer);
 | 
						|
	}
 | 
						|
 | 
						|
	/* Stop TX/RX DMA */
 | 
						|
	stmmac_stop_all_dma(priv);
 | 
						|
 | 
						|
	if (priv->plat->serdes_powerdown)
 | 
						|
		priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
 | 
						|
 | 
						|
	/* Enable Power down mode by programming the PMT regs */
 | 
						|
	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
 | 
						|
		stmmac_pmt(priv, priv->hw, priv->wolopts);
 | 
						|
		priv->irq_wake = 1;
 | 
						|
	} else {
 | 
						|
		if (priv->plat->integrated_phy_power)
 | 
						|
			priv->plat->integrated_phy_power(priv->plat->bsp_priv,
 | 
						|
							 false);
 | 
						|
		stmmac_mac_set(priv, priv->ioaddr, false);
 | 
						|
		pinctrl_pm_select_sleep_state(priv->device);
 | 
						|
		/* Make the phy into suspend state */
 | 
						|
		if (priv->mii)
 | 
						|
			stmmac_mdio_idle(priv->mii);
 | 
						|
	}
 | 
						|
 | 
						|
	mutex_unlock(&priv->lock);
 | 
						|
 | 
						|
	rtnl_lock();
 | 
						|
	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
 | 
						|
		phylink_suspend(priv->phylink, true);
 | 
						|
	} else {
 | 
						|
		if (device_may_wakeup(priv->device))
 | 
						|
			phylink_speed_down(priv->phylink, false);
 | 
						|
		phylink_suspend(priv->phylink, false);
 | 
						|
	}
 | 
						|
	rtnl_unlock();
 | 
						|
 | 
						|
	if (priv->dma_cap.fpesel) {
 | 
						|
		/* Disable FPE */
 | 
						|
		stmmac_fpe_configure(priv, priv->ioaddr,
 | 
						|
				     priv->plat->fpe_cfg,
 | 
						|
				     priv->plat->tx_queues_to_use,
 | 
						|
				     priv->plat->rx_queues_to_use, false);
 | 
						|
 | 
						|
		stmmac_fpe_handshake(priv, false);
 | 
						|
		stmmac_fpe_stop_wq(priv);
 | 
						|
	}
 | 
						|
 | 
						|
	priv->speed = SPEED_UNKNOWN;
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_suspend);
 | 
						|
 | 
						|
static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_rx_queue *rx_q = &priv->dma_conf.rx_queue[queue];
 | 
						|
 | 
						|
	rx_q->cur_rx = 0;
 | 
						|
	rx_q->dirty_rx = 0;
 | 
						|
}
 | 
						|
 | 
						|
static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue)
 | 
						|
{
 | 
						|
	struct stmmac_tx_queue *tx_q = &priv->dma_conf.tx_queue[queue];
 | 
						|
 | 
						|
	tx_q->cur_tx = 0;
 | 
						|
	tx_q->dirty_tx = 0;
 | 
						|
	tx_q->mss = 0;
 | 
						|
 | 
						|
	netdev_tx_reset_queue(netdev_get_tx_queue(priv->dev, queue));
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_reset_queues_param - reset queue parameters
 | 
						|
 * @priv: device pointer
 | 
						|
 */
 | 
						|
static void stmmac_reset_queues_param(struct stmmac_priv *priv)
 | 
						|
{
 | 
						|
	u32 rx_cnt = priv->plat->rx_queues_to_use;
 | 
						|
	u32 tx_cnt = priv->plat->tx_queues_to_use;
 | 
						|
	u32 queue;
 | 
						|
 | 
						|
	for (queue = 0; queue < rx_cnt; queue++)
 | 
						|
		stmmac_reset_rx_queue(priv, queue);
 | 
						|
 | 
						|
	for (queue = 0; queue < tx_cnt; queue++)
 | 
						|
		stmmac_reset_tx_queue(priv, queue);
 | 
						|
}
 | 
						|
 | 
						|
/**
 | 
						|
 * stmmac_resume - resume callback
 | 
						|
 * @dev: device pointer
 | 
						|
 * Description: when resume this function is invoked to setup the DMA and CORE
 | 
						|
 * in a usable state.
 | 
						|
 */
 | 
						|
int stmmac_resume(struct device *dev)
 | 
						|
{
 | 
						|
	struct net_device *ndev = dev_get_drvdata(dev);
 | 
						|
	struct stmmac_priv *priv = netdev_priv(ndev);
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (!netif_running(ndev))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	/* Power Down bit, into the PM register, is cleared
 | 
						|
	 * automatically as soon as a magic packet or a Wake-up frame
 | 
						|
	 * is received. Anyway, it's better to manually clear
 | 
						|
	 * this bit because it can generate problems while resuming
 | 
						|
	 * from another devices (e.g. serial console).
 | 
						|
	 */
 | 
						|
	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
 | 
						|
		mutex_lock(&priv->lock);
 | 
						|
		stmmac_pmt(priv, priv->hw, 0);
 | 
						|
		mutex_unlock(&priv->lock);
 | 
						|
		priv->irq_wake = 0;
 | 
						|
	} else {
 | 
						|
		pinctrl_pm_select_default_state(priv->device);
 | 
						|
		/* reset the phy so that it's ready */
 | 
						|
		if (priv->mii)
 | 
						|
			stmmac_mdio_reset(priv->mii);
 | 
						|
		if (priv->plat->integrated_phy_power)
 | 
						|
			priv->plat->integrated_phy_power(priv->plat->bsp_priv,
 | 
						|
							 true);
 | 
						|
	}
 | 
						|
 | 
						|
	if (priv->plat->serdes_powerup) {
 | 
						|
		ret = priv->plat->serdes_powerup(ndev,
 | 
						|
						 priv->plat->bsp_priv);
 | 
						|
 | 
						|
		if (ret < 0)
 | 
						|
			return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	rtnl_lock();
 | 
						|
	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
 | 
						|
		phylink_resume(priv->phylink);
 | 
						|
	} else {
 | 
						|
		phylink_resume(priv->phylink);
 | 
						|
		if (device_may_wakeup(priv->device))
 | 
						|
			phylink_speed_up(priv->phylink);
 | 
						|
	}
 | 
						|
	rtnl_unlock();
 | 
						|
 | 
						|
	rtnl_lock();
 | 
						|
	mutex_lock(&priv->lock);
 | 
						|
 | 
						|
	stmmac_reset_queues_param(priv);
 | 
						|
 | 
						|
	stmmac_free_tx_skbufs(priv);
 | 
						|
	stmmac_clear_descriptors(priv, &priv->dma_conf);
 | 
						|
 | 
						|
	stmmac_hw_setup(ndev, false);
 | 
						|
	stmmac_init_coalesce(priv);
 | 
						|
	stmmac_set_rx_mode(ndev);
 | 
						|
 | 
						|
	stmmac_restore_hw_vlan_rx_fltr(priv, ndev, priv->hw);
 | 
						|
 | 
						|
	stmmac_enable_all_queues(priv);
 | 
						|
	stmmac_enable_all_dma_irq(priv);
 | 
						|
 | 
						|
	mutex_unlock(&priv->lock);
 | 
						|
	rtnl_unlock();
 | 
						|
 | 
						|
	netif_device_attach(ndev);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
EXPORT_SYMBOL_GPL(stmmac_resume);
 | 
						|
 | 
						|
#ifndef MODULE
 | 
						|
static int __init stmmac_cmdline_opt(char *str)
 | 
						|
{
 | 
						|
	char *opt;
 | 
						|
 | 
						|
	if (!str || !*str)
 | 
						|
		return 1;
 | 
						|
	while ((opt = strsep(&str, ",")) != NULL) {
 | 
						|
		if (!strncmp(opt, "debug:", 6)) {
 | 
						|
			if (kstrtoint(opt + 6, 0, &debug))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "phyaddr:", 8)) {
 | 
						|
			if (kstrtoint(opt + 8, 0, &phyaddr))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "buf_sz:", 7)) {
 | 
						|
			if (kstrtoint(opt + 7, 0, &buf_sz))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "tc:", 3)) {
 | 
						|
			if (kstrtoint(opt + 3, 0, &tc))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "watchdog:", 9)) {
 | 
						|
			if (kstrtoint(opt + 9, 0, &watchdog))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "flow_ctrl:", 10)) {
 | 
						|
			if (kstrtoint(opt + 10, 0, &flow_ctrl))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "pause:", 6)) {
 | 
						|
			if (kstrtoint(opt + 6, 0, &pause))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "eee_timer:", 10)) {
 | 
						|
			if (kstrtoint(opt + 10, 0, &eee_timer))
 | 
						|
				goto err;
 | 
						|
		} else if (!strncmp(opt, "chain_mode:", 11)) {
 | 
						|
			if (kstrtoint(opt + 11, 0, &chain_mode))
 | 
						|
				goto err;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 1;
 | 
						|
 | 
						|
err:
 | 
						|
	pr_err("%s: ERROR broken module parameter conversion", __func__);
 | 
						|
	return 1;
 | 
						|
}
 | 
						|
 | 
						|
__setup("stmmaceth=", stmmac_cmdline_opt);
 | 
						|
#endif /* MODULE */
 | 
						|
 | 
						|
static int __init stmmac_init(void)
 | 
						|
{
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
	/* Create debugfs main directory if it doesn't exist yet */
 | 
						|
	if (!stmmac_fs_dir)
 | 
						|
		stmmac_fs_dir = debugfs_create_dir(STMMAC_RESOURCE_NAME, NULL);
 | 
						|
	register_netdevice_notifier(&stmmac_notifier);
 | 
						|
#endif
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static void __exit stmmac_exit(void)
 | 
						|
{
 | 
						|
#ifdef CONFIG_DEBUG_FS
 | 
						|
	unregister_netdevice_notifier(&stmmac_notifier);
 | 
						|
	debugfs_remove_recursive(stmmac_fs_dir);
 | 
						|
#endif
 | 
						|
}
 | 
						|
 | 
						|
module_init(stmmac_init)
 | 
						|
module_exit(stmmac_exit)
 | 
						|
 | 
						|
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
 | 
						|
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
 | 
						|
MODULE_LICENSE("GPL");
 |