1864 lines
47 KiB
C
1864 lines
47 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* sc831ai driver
|
|
*
|
|
* Copyright (C) 2024 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* V0.0X01.0X01 first version
|
|
*/
|
|
|
|
//#define DEBUG
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/version.h>
|
|
#include <linux/rk-camera-module.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-async.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/rk-preisp.h>
|
|
#include "../platform/rockchip/isp/rkisp_tb_helper.h"
|
|
#include "cam-tb-setup.h"
|
|
#include "cam-sleep-wakeup.h"
|
|
|
|
#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x01)
|
|
|
|
#ifndef V4L2_CID_DIGITAL_GAIN
|
|
#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN
|
|
#endif
|
|
|
|
#define SC831AI_2LANES 2
|
|
|
|
#define MIPI_FREQ_396M 396000000 // 792Mbps
|
|
|
|
#define SC831AI_MAX_PIXEL_RATE (MIPI_FREQ_396M / 10 * 2 * SC831AI_2LANES)
|
|
#define OF_CAMERA_HDR_MODE "rockchip,camera-hdr-mode"
|
|
|
|
#define SC831AI_XVCLK_FREQ 24000000
|
|
|
|
/* TODO: Get the real chip id from reg */
|
|
#define CHIP_ID 0xC170
|
|
#define SC831AI_REG_CHIP_ID 0x3107
|
|
|
|
#define SC831AI_REG_CTRL_MODE 0x0100
|
|
#define SC831AI_MODE_SW_STANDBY 0x0
|
|
#define SC831AI_MODE_STREAMING BIT(0)
|
|
|
|
/*expo*/
|
|
#define SC831AI_EXPOSURE_MIN 3 /*okay*/
|
|
#define SC831AI_EXPOSURE_STEP 1 /*okay*/
|
|
#define SC831AI_VTS_MAX 0xffff /*okay*/
|
|
|
|
//long exposure
|
|
#define SC831AI_REG_EXP_LONG_H 0x3e00 //[3:0]
|
|
#define SC831AI_REG_EXP_LONG_M 0x3e01 //[7:0]
|
|
#define SC831AI_REG_EXP_LONG_L 0x3e02 //[7:4]
|
|
|
|
//short exposure //for hdr
|
|
#define SC831AI_REG_EXP_SF_H 0x3e22
|
|
#define SC831AI_REG_EXP_SF_M 0x3e04 //[7:0]
|
|
#define SC831AI_REG_EXP_SF_L 0x3e05 //[7:4]
|
|
|
|
#define SC831AI_FETCH_EXP_H(VAL) (((VAL) >> 12) & 0xF)
|
|
#define SC831AI_FETCH_EXP_M(VAL) (((VAL) >> 4) & 0xFF)
|
|
#define SC831AI_FETCH_EXP_L(VAL) (((VAL) & 0xF) << 4)
|
|
|
|
/*gain*/
|
|
//long frame and normal gain reg
|
|
#define SC831AI_REG_DGAIN 0x3e06
|
|
#define SC831AI_REG_DGAIN_FINE 0x3e07
|
|
#define SC831AI_REG_AGAIN 0x3e08
|
|
#define SC831AI_REG_GAIN_FINE 0x3e09
|
|
|
|
//short frame gain reg
|
|
#define SC831AI_SF_REG_DGAIN 0x3e10
|
|
#define SC831AI_SF_REG_DGAIN_FINE 0x3e11
|
|
#define SC831AI_SF_REG_GAIN_FINE 0x3e12
|
|
#define SC831AI_SF_REG_AGAIN 0x3e13
|
|
|
|
#define SC831AI_GAIN_MIN 64 /* = 1 * 64 */
|
|
#define SC831AI_GAIN_MAX (47351) /* 46.242 * 16 * 64 */
|
|
#define SC831AI_GAIN_STEP 1
|
|
#define SC831AI_GAIN_DEFAULT 64
|
|
|
|
#define SC831AI_REG_VTS 0x320e
|
|
|
|
//group hold
|
|
#define SC831AI_GROUP_UPDATE_ADDRESS 0x3812
|
|
#define SC831AI_GROUP_UPDATE_START_DATA 0x00
|
|
#define SC831AI_GROUP_UPDATE_LAUNCH 0x30
|
|
#define SC831AI_GROUP_DEALY_CTRL 0x3802
|
|
|
|
#define SC831AI_SOFTWARE_RESET_REG 0x0103
|
|
#define SC831AI_REG_TEST_PATTERN 0x4501
|
|
#define SC831AI_TEST_PATTERN_ENABLE 0x08
|
|
|
|
#define SC831AI_FLIP_REG 0x3221
|
|
#define SC831AI_FLIP_MASK 0x60
|
|
#define SC831AI_MIRROR_MASK 0x06
|
|
|
|
#define REG_NULL 0xFFFF
|
|
|
|
#define SC831AI_REG_VALUE_08BIT 1
|
|
#define SC831AI_REG_VALUE_16BIT 2
|
|
#define SC831AI_REG_VALUE_24BIT 3
|
|
|
|
#define OF_CAMERA_PINCTRL_STATE_DEFAULT "rockchip,camera_default"
|
|
#define OF_CAMERA_PINCTRL_STATE_SLEEP "rockchip,camera_sleep"
|
|
|
|
#define SC831AI_NAME "sc831ai"
|
|
|
|
static const char *const sc831ai_supply_names[] = {
|
|
"dvdd", // Digital core power
|
|
"dovdd", // Digital I/O power
|
|
"avdd", // Analog power
|
|
};
|
|
#define SC831AI_NUM_SUPPLIES ARRAY_SIZE(sc831ai_supply_names)
|
|
|
|
struct regval {
|
|
u16 addr;
|
|
u8 val;
|
|
};
|
|
|
|
struct sc831ai_mode {
|
|
u32 bus_fmt;
|
|
u32 width;
|
|
u32 height;
|
|
struct v4l2_fract max_fps;
|
|
u32 hts_def;
|
|
u32 vts_def;
|
|
u32 exp_def;
|
|
u32 mipi_freq_idx;
|
|
u32 bpp;
|
|
const struct regval *reg_list;
|
|
u32 hdr_mode;
|
|
u32 vc[PAD_MAX];
|
|
};
|
|
|
|
struct sc831ai {
|
|
struct i2c_client *client;
|
|
struct clk *xvclk;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *pwdn_gpio;
|
|
struct regulator_bulk_data supplies[SC831AI_NUM_SUPPLIES];
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_sleep;
|
|
|
|
struct v4l2_subdev subdev;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *anal_a_gain;
|
|
struct v4l2_ctrl *digi_gain;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *test_pattern;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct mutex mutex;
|
|
struct v4l2_fract cur_fps;
|
|
bool streaming;
|
|
bool power_on;
|
|
bool is_thunderboot;
|
|
bool is_first_streamoff;
|
|
const struct sc831ai_mode *cur_mode;
|
|
u32 module_index;
|
|
u32 cfg_num;
|
|
const char *module_facing;
|
|
const char *module_name;
|
|
const char *len_name;
|
|
u32 cur_vts;
|
|
bool has_init_exp;
|
|
struct preisp_hdrae_exp_s init_hdrae_exp;
|
|
struct cam_sw_info *cam_sw_inf;
|
|
};
|
|
|
|
#define to_sc831ai(sd) container_of(sd, struct sc831ai, subdev)
|
|
|
|
//Cleaned_0x08_SC831AI_mipi_24Minput_2lane_10bit_792Mbps_3840x2160_15fps.ini
|
|
static __maybe_unused const struct regval sc831ai_2lane_linear10bit_3840x2160_regs[] = {
|
|
{0x0103, 0x01},
|
|
{0x36e9, 0x80},
|
|
{0x37f9, 0x80},
|
|
{0x3018, 0x3a},
|
|
{0x3019, 0x0c},
|
|
{0x301f, 0x08},
|
|
{0x30b8, 0x44},
|
|
{0x320c, 0x10},
|
|
{0x320d, 0x68},
|
|
{0x320e, 0x08},
|
|
{0x320f, 0xca},
|
|
{0x3301, 0x28},
|
|
{0x3302, 0x10},
|
|
{0x3303, 0x10},
|
|
{0x3304, 0x68},
|
|
{0x3305, 0x00},
|
|
{0x3306, 0x70},
|
|
{0x3307, 0x08},
|
|
{0x3308, 0x14},
|
|
{0x3309, 0x98},
|
|
{0x330a, 0x00},
|
|
{0x330b, 0xf8},
|
|
{0x330c, 0x10},
|
|
{0x330d, 0x08},
|
|
{0x330e, 0x36},
|
|
{0x331e, 0x41},
|
|
{0x331f, 0x71},
|
|
{0x3333, 0x10},
|
|
{0x3334, 0x40},
|
|
{0x334c, 0x10},
|
|
{0x335d, 0x60},
|
|
{0x3364, 0x5e},
|
|
{0x3367, 0x04},
|
|
{0x3390, 0x01},
|
|
{0x3391, 0x03},
|
|
{0x3392, 0x07},
|
|
{0x3393, 0x28},
|
|
{0x3394, 0x4c},
|
|
{0x3395, 0x4c},
|
|
{0x3396, 0x01},
|
|
{0x3397, 0x03},
|
|
{0x3398, 0x07},
|
|
{0x3399, 0x28},
|
|
{0x339a, 0x4c},
|
|
{0x339b, 0x4c},
|
|
{0x339c, 0x4c},
|
|
{0x33ad, 0x24},
|
|
{0x33ae, 0x4e},
|
|
{0x33af, 0x80},
|
|
{0x33b2, 0x50},
|
|
{0x33b3, 0x20},
|
|
{0x33f8, 0x00},
|
|
{0x33f9, 0x88},
|
|
{0x33fa, 0x00},
|
|
{0x33fb, 0x98},
|
|
{0x33fc, 0x43},
|
|
{0x33fd, 0x47},
|
|
{0x349f, 0x03},
|
|
{0x34a6, 0x43},
|
|
{0x34a7, 0x47},
|
|
{0x34a8, 0x20},
|
|
{0x34a9, 0x20},
|
|
{0x34aa, 0x01},
|
|
{0x34ab, 0x10},
|
|
{0x34ac, 0x01},
|
|
{0x34ad, 0x20},
|
|
{0x34f8, 0x43},
|
|
{0x34f9, 0x08},
|
|
{0x3632, 0x64},
|
|
{0x363b, 0x18},
|
|
{0x363c, 0x0e},
|
|
{0x363d, 0x8e},
|
|
{0x363e, 0x6c},
|
|
{0x3654, 0x00},
|
|
{0x3674, 0xb2},
|
|
{0x3675, 0xa4},
|
|
{0x3676, 0x88},
|
|
{0x367c, 0x41},
|
|
{0x367d, 0x43},
|
|
{0x3690, 0x35},
|
|
{0x3691, 0x36},
|
|
{0x3692, 0x66},
|
|
{0x3693, 0x40},
|
|
{0x3694, 0x41},
|
|
{0x3696, 0x85},
|
|
{0x3697, 0x85},
|
|
{0x3698, 0x83},
|
|
{0x3699, 0x92},
|
|
{0x369a, 0x99},
|
|
{0x369b, 0xff},
|
|
{0x369c, 0xff},
|
|
{0x369d, 0xff},
|
|
{0x36a2, 0x40},
|
|
{0x36a3, 0x41},
|
|
{0x36a4, 0x43},
|
|
{0x36a5, 0x47},
|
|
{0x36a6, 0x4f},
|
|
{0x36a7, 0x4f},
|
|
{0x36a8, 0x4f},
|
|
{0x36d0, 0x15},
|
|
{0x36ea, 0x0b},
|
|
{0x36eb, 0x04},
|
|
{0x36ec, 0x43},
|
|
{0x36ed, 0x3a},
|
|
{0x370f, 0x01},
|
|
{0x3727, 0x14},
|
|
{0x37b0, 0x03},
|
|
{0x37b1, 0x8b},
|
|
{0x37b2, 0x8b},
|
|
{0x37b3, 0x41},
|
|
{0x37b4, 0x43},
|
|
{0x37fa, 0xc7},
|
|
{0x37fb, 0x31},
|
|
{0x37fc, 0x10},
|
|
{0x37fd, 0x36},
|
|
{0x3905, 0xad},
|
|
{0x391f, 0x41},
|
|
{0x3e00, 0x01},
|
|
{0x3e01, 0x17},
|
|
{0x3e02, 0x00},
|
|
{0x4509, 0x1a},
|
|
{0x450d, 0x0a},
|
|
{0x5780, 0x66},
|
|
{0x5784, 0x08},
|
|
{0x5785, 0x04},
|
|
{0x5787, 0x0a},
|
|
{0x5788, 0x0a},
|
|
{0x5789, 0x08},
|
|
{0x578a, 0x0a},
|
|
{0x578b, 0x0a},
|
|
{0x578c, 0x08},
|
|
{0x578d, 0x40},
|
|
{0x5790, 0x08},
|
|
{0x5791, 0x04},
|
|
{0x5792, 0x04},
|
|
{0x5793, 0x08},
|
|
{0x5794, 0x04},
|
|
{0x5795, 0x04},
|
|
{0x57a8, 0xd0},
|
|
{0x57aa, 0x2a},
|
|
{0x57ab, 0x7f},
|
|
{0x57ac, 0x00},
|
|
{0x57ad, 0x00},
|
|
{0x36e9, 0x24},
|
|
{0x37f9, 0x53},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
/*
|
|
* The width and height must be configured to be
|
|
* the same as the current output resolution of the sensor.
|
|
* The input width of the isp needs to be 16 aligned.
|
|
* The input height of the isp needs to be 8 aligned.
|
|
* If the width or height does not meet the alignment rules,
|
|
* you can configure the cropping parameters with the following function to
|
|
* crop out the appropriate resolution.
|
|
* struct v4l2_subdev_pad_ops {
|
|
* .get_selection
|
|
* }
|
|
*/
|
|
static const struct sc831ai_mode supported_modes[] = {
|
|
{
|
|
.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
.width = 3840,
|
|
.height = 2160,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 150000,
|
|
},
|
|
.exp_def = 0x08c0,
|
|
.hts_def = 0x1068,
|
|
.vts_def = 0x08ca,
|
|
.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
.reg_list = sc831ai_2lane_linear10bit_3840x2160_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.mipi_freq_idx = 0,
|
|
.bpp = 10,
|
|
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
|
},
|
|
};
|
|
|
|
static const char *const sc831ai_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Vertical Color Bar Type 1",
|
|
"Vertical Color Bar Type 2",
|
|
"Vertical Color Bar Type 3",
|
|
"Vertical Color Bar Type 4"
|
|
};
|
|
|
|
static const s64 link_freq_items[] = {
|
|
MIPI_FREQ_396M,
|
|
};
|
|
|
|
/* Write registers up to 4 at a time */
|
|
static int sc831ai_write_reg(struct i2c_client *client, u16 reg, u32 len,
|
|
u32 val)
|
|
{
|
|
u32 buf_i, val_i;
|
|
u8 buf[6];
|
|
u8 *val_p;
|
|
__be32 val_be;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
buf[0] = reg >> 8;
|
|
buf[1] = reg & 0xff;
|
|
|
|
val_be = cpu_to_be32(val);
|
|
val_p = (u8 *)&val_be;
|
|
buf_i = 2;
|
|
val_i = 4 - len;
|
|
|
|
while (val_i < 4)
|
|
buf[buf_i++] = val_p[val_i++];
|
|
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_write_array(struct i2c_client *client,
|
|
const struct regval *regs)
|
|
{
|
|
u32 i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) {
|
|
ret = sc831ai_write_reg(client, regs[i].addr,
|
|
SC831AI_REG_VALUE_08BIT, regs[i].val);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Read registers up to 4 at a time */
|
|
static int sc831ai_read_reg(struct i2c_client *client, u16 reg,
|
|
unsigned int len, u32 *val)
|
|
{
|
|
struct i2c_msg msgs[2];
|
|
u8 *data_be_p;
|
|
__be32 data_be = 0;
|
|
__be16 reg_addr_be = cpu_to_be16(reg);
|
|
int ret;
|
|
|
|
if (len > 4 || !len)
|
|
return -EINVAL;
|
|
|
|
data_be_p = (u8 *)&data_be;
|
|
/* Write register address */
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 2;
|
|
msgs[0].buf = (u8 *)®_addr_be;
|
|
|
|
/* Read data from register */
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_be_p[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = be32_to_cpu(data_be);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_get_reso_dist(const struct sc831ai_mode *mode,
|
|
struct v4l2_mbus_framefmt *framefmt)
|
|
{
|
|
return abs(mode->width - framefmt->width) +
|
|
abs(mode->height - framefmt->height);
|
|
}
|
|
|
|
static const struct sc831ai_mode *
|
|
sc831ai_find_best_fit(struct sc831ai *sc831ai, struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
|
|
int dist;
|
|
int cur_best_fit = 0;
|
|
int cur_best_fit_dist = -1;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
|
|
dist = sc831ai_get_reso_dist(&supported_modes[i], framefmt);
|
|
if ((cur_best_fit_dist == -1 || dist < cur_best_fit_dist) &&
|
|
supported_modes[i].bus_fmt == framefmt->code) {
|
|
cur_best_fit_dist = dist;
|
|
cur_best_fit = i;
|
|
}
|
|
}
|
|
dev_info(&sc831ai->client->dev, "%s: cur_best_fit(%d)", __func__,
|
|
cur_best_fit);
|
|
|
|
return &supported_modes[cur_best_fit];
|
|
}
|
|
|
|
static void sc831ai_change_mode(struct sc831ai *sc831ai,
|
|
const struct sc831ai_mode *mode)
|
|
{
|
|
sc831ai->cur_mode = mode;
|
|
sc831ai->cur_vts = sc831ai->cur_mode->vts_def;
|
|
dev_info(&sc831ai->client->dev, "set fmt: cur_mode: %dx%d, hdr: %d\n",
|
|
mode->width, mode->height, mode->hdr_mode);
|
|
}
|
|
|
|
static int sc831ai_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
const struct sc831ai_mode *mode;
|
|
s64 h_blank, vblank_def;
|
|
u64 pixel_rate = 0;
|
|
|
|
mutex_lock(&sc831ai->mutex);
|
|
|
|
mode = sc831ai_find_best_fit(sc831ai, fmt);
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
|
|
#else
|
|
mutex_unlock(&sc831ai->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
sc831ai_change_mode(sc831ai, mode);
|
|
h_blank = mode->hts_def - mode->width;
|
|
__v4l2_ctrl_modify_range(sc831ai->hblank, h_blank, h_blank, 1,
|
|
h_blank);
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(sc831ai->vblank, vblank_def,
|
|
SC831AI_VTS_MAX - mode->height, 1,
|
|
vblank_def);
|
|
__v4l2_ctrl_s_ctrl(sc831ai->link_freq, mode->mipi_freq_idx);
|
|
pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] /
|
|
mode->bpp * 2 * SC831AI_2LANES;
|
|
__v4l2_ctrl_s_ctrl_int64(sc831ai->pixel_rate, pixel_rate);
|
|
sc831ai->cur_fps = mode->max_fps;
|
|
sc831ai->cur_vts = mode->vts_def;
|
|
}
|
|
|
|
mutex_unlock(&sc831ai->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
const struct sc831ai_mode *mode = sc831ai->cur_mode;
|
|
|
|
mutex_lock(&sc831ai->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
|
|
#else
|
|
mutex_unlock(&sc831ai->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->pad < PAD_MAX && mode->hdr_mode != NO_HDR)
|
|
fmt->reserved[0] = mode->vc[fmt->pad];
|
|
else
|
|
fmt->reserved[0] = mode->vc[PAD0];
|
|
}
|
|
mutex_unlock(&sc831ai->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
code->code = sc831ai->cur_mode->bus_fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_enum_frame_sizes(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
if (fse->index >= sc831ai->cfg_num)
|
|
return -EINVAL;
|
|
|
|
if (fse->code != supported_modes[fse->index].bus_fmt)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = supported_modes[fse->index].width;
|
|
fse->max_height = supported_modes[fse->index].height;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_enable_test_pattern(struct sc831ai *sc831ai, u32 pattern)
|
|
{
|
|
u32 val = 0;
|
|
int ret = 0;
|
|
|
|
ret = sc831ai_read_reg(sc831ai->client, SC831AI_REG_TEST_PATTERN,
|
|
SC831AI_REG_VALUE_08BIT, &val);
|
|
if (pattern)
|
|
val |= SC831AI_TEST_PATTERN_ENABLE;
|
|
else
|
|
val &= ~SC831AI_TEST_PATTERN_ENABLE;
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_REG_TEST_PATTERN,
|
|
SC831AI_REG_VALUE_08BIT, val);
|
|
return ret;
|
|
}
|
|
|
|
static int sc831ai_g_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
const struct sc831ai_mode *mode = sc831ai->cur_mode;
|
|
|
|
if (sc831ai->streaming)
|
|
fi->interval = sc831ai->cur_fps;
|
|
else
|
|
fi->interval = mode->max_fps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad_id,
|
|
struct v4l2_mbus_config *config)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
const struct sc831ai_mode *mode = sc831ai->cur_mode;
|
|
u32 val = 0;
|
|
|
|
if (mode->hdr_mode == NO_HDR)
|
|
val = 1 << (SC831AI_2LANES - 1) | V4L2_MBUS_CSI2_CHANNEL_0 |
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
|
|
if (mode->hdr_mode == HDR_X2)
|
|
val = 1 << (SC831AI_2LANES - 1) | V4L2_MBUS_CSI2_CHANNEL_0 |
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK |
|
|
V4L2_MBUS_CSI2_CHANNEL_1;
|
|
|
|
config->type = V4L2_MBUS_CSI2_DPHY;
|
|
config->flags = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sc831ai_get_module_inf(struct sc831ai *sc831ai,
|
|
struct rkmodule_inf *inf)
|
|
{
|
|
memset(inf, 0, sizeof(*inf));
|
|
strscpy(inf->base.sensor, SC831AI_NAME, sizeof(inf->base.sensor));
|
|
strscpy(inf->base.module, sc831ai->module_name,
|
|
sizeof(inf->base.module));
|
|
strscpy(inf->base.lens, sc831ai->len_name, sizeof(inf->base.lens));
|
|
}
|
|
|
|
static void sc831ai_get_gain_reg(u32 val, u8 *again_reg, u8 *dgain_reg,
|
|
u8 *again_fine_reg, u8 *dgain_fine_reg)
|
|
{
|
|
u32 coarse_again = 0, coarse_dgain = 0, fine_again = 0, fine_dgain = 0;
|
|
int gain_factor;
|
|
|
|
if (val < SC831AI_GAIN_MIN)
|
|
val = SC831AI_GAIN_MIN;
|
|
else if (val > SC831AI_GAIN_MAX)
|
|
val = SC831AI_GAIN_MAX;
|
|
|
|
gain_factor = val * 1000 / 64;
|
|
if (gain_factor < 1468) { /* 1x ~ 1.468x */
|
|
coarse_again = 0x00;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 1000;
|
|
} else if (gain_factor < 2936) { /* 1.438 ~ 2.936x */
|
|
coarse_again = 0x80;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 1468;
|
|
} else if (gain_factor < 5872) { /* 2.936x ~ 5.872x */
|
|
coarse_again = 0x81;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 2936;
|
|
} else if (gain_factor < 11744) { /* 5.872 ~ 11.744x */
|
|
coarse_again = 0x83;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 5872;
|
|
} else if (gain_factor < 23488) { /* 11.744x ~ 23.488x */
|
|
coarse_again = 0x87;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 11744;
|
|
} else if (gain_factor <= 46242) { /* 23.488x ~ 46.242x */
|
|
coarse_again = 0x8f;
|
|
coarse_dgain = 0x00;
|
|
fine_dgain = 0x80;
|
|
fine_again = gain_factor * 32 / 23488;
|
|
} else if (gain_factor < 46242 * 2) { /* 1.0x ~ 2.0x */
|
|
//open dgain begin max digital gain 16X
|
|
coarse_again = 0x8f;
|
|
coarse_dgain = 0x00;
|
|
fine_again = 0x3f;
|
|
fine_dgain = gain_factor * 128 / 46242;
|
|
} else if (gain_factor < 46242 * 4) { /* 2.0x ~ 4.0x */
|
|
coarse_again = 0x8f;
|
|
coarse_dgain = 0x01;
|
|
fine_again = 0x3f;
|
|
fine_dgain = gain_factor * 128 / 46242 / 2;
|
|
} else if (gain_factor < 46242 * 8) { /* 4.0x ~ 8.0x */
|
|
coarse_again = 0x8f;
|
|
coarse_dgain = 0x03;
|
|
fine_again = 0x3f;
|
|
fine_dgain = gain_factor * 128 / 46242 / 4;
|
|
} else if (gain_factor < 46242 * 16) { /* 8.0x ~ 16.0x */
|
|
coarse_again = 0x8f;
|
|
coarse_dgain = 0x07;
|
|
fine_again = 0x3f;
|
|
fine_dgain = gain_factor * 128 / 46242 / 8;
|
|
}
|
|
*again_reg = coarse_again;
|
|
*again_fine_reg = fine_again;
|
|
*dgain_reg = coarse_dgain;
|
|
*dgain_fine_reg = fine_dgain;
|
|
}
|
|
|
|
static int sc831ai_get_channel_info(struct sc831ai *sc831ai,
|
|
struct rkmodule_channel_info *ch_info)
|
|
{
|
|
if (ch_info->index < PAD0 || ch_info->index >= PAD_MAX)
|
|
return -EINVAL;
|
|
ch_info->vc = sc831ai->cur_mode->vc[ch_info->index];
|
|
ch_info->width = sc831ai->cur_mode->width;
|
|
ch_info->height = sc831ai->cur_mode->height;
|
|
ch_info->bus_fmt = sc831ai->cur_mode->bus_fmt;
|
|
return 0;
|
|
}
|
|
|
|
static long sc831ai_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
struct rkmodule_hdr_cfg *hdr_cfg;
|
|
const struct sc831ai_mode *mode;
|
|
struct rkmodule_channel_info *ch_info;
|
|
long ret = 0;
|
|
u64 pixel_rate = 0;
|
|
u32 i, h, w, stream;
|
|
|
|
switch (cmd) {
|
|
case PREISP_CMD_SET_HDRAE_EXP:
|
|
/*
|
|
* ret = sc831ai_set_hdrae(sc831ai, arg);
|
|
*/
|
|
break;
|
|
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
if (sc831ai->streaming) {
|
|
ret = sc831ai_write_array(sc831ai->client,
|
|
sc831ai->cur_mode->reg_list);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
w = sc831ai->cur_mode->width;
|
|
h = sc831ai->cur_mode->height;
|
|
for (i = 0; i < sc831ai->cfg_num; i++) {
|
|
if (w == supported_modes[i].width &&
|
|
h == supported_modes[i].height &&
|
|
supported_modes[i].hdr_mode == hdr_cfg->hdr_mode) {
|
|
sc831ai_change_mode(sc831ai,
|
|
&supported_modes[i]);
|
|
break;
|
|
}
|
|
}
|
|
if (i == sc831ai->cfg_num) {
|
|
dev_err(&sc831ai->client->dev,
|
|
"not find hdr mode:%d %dx%d config\n",
|
|
hdr_cfg->hdr_mode, w, h);
|
|
ret = -EINVAL;
|
|
} else {
|
|
mode = sc831ai->cur_mode;
|
|
w = mode->hts_def - mode->width;
|
|
h = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(sc831ai->hblank, w, w, 1, w);
|
|
__v4l2_ctrl_modify_range(sc831ai->vblank, h,
|
|
SC831AI_VTS_MAX - mode->height,
|
|
1, h);
|
|
__v4l2_ctrl_s_ctrl(sc831ai->link_freq,
|
|
mode->mipi_freq_idx);
|
|
pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] /
|
|
mode->bpp * 2 * SC831AI_2LANES;
|
|
__v4l2_ctrl_s_ctrl_int64(sc831ai->pixel_rate,
|
|
pixel_rate);
|
|
sc831ai->cur_fps = mode->max_fps;
|
|
sc831ai->cur_vts = mode->vts_def;
|
|
dev_info(&sc831ai->client->dev, "sensor mode: %d\n",
|
|
mode->hdr_mode);
|
|
}
|
|
break;
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
sc831ai_get_module_inf(sc831ai, (struct rkmodule_inf *)arg);
|
|
break;
|
|
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
hdr_cfg->esp.mode = HDR_NORMAL_VC;
|
|
hdr_cfg->hdr_mode = sc831ai->cur_mode->hdr_mode;
|
|
break;
|
|
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
stream = *((u32 *)arg);
|
|
if (stream)
|
|
ret = sc831ai_write_reg(sc831ai->client,
|
|
SC831AI_REG_CTRL_MODE,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_MODE_STREAMING);
|
|
else
|
|
ret = sc831ai_write_reg(sc831ai->client,
|
|
SC831AI_REG_CTRL_MODE,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_MODE_SW_STANDBY);
|
|
break;
|
|
|
|
case RKMODULE_GET_CHANNEL_INFO:
|
|
ch_info = (struct rkmodule_channel_info *)arg;
|
|
ret = sc831ai_get_channel_info(sc831ai, ch_info);
|
|
break;
|
|
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long sc831ai_compat_ioctl32(struct v4l2_subdev *sd, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
void __user *up = compat_ptr(arg);
|
|
struct rkmodule_inf *inf;
|
|
struct rkmodule_awb_cfg *cfg;
|
|
struct rkmodule_hdr_cfg *hdr;
|
|
struct preisp_hdrae_exp_s *hdrae;
|
|
struct rkmodule_channel_info *ch_info;
|
|
long ret;
|
|
u32 stream;
|
|
u32 brl = 0;
|
|
struct rkmodule_csi_dphy_param *dphy_param;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
inf = kzalloc(sizeof(*inf), GFP_KERNEL);
|
|
if (!inf) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = sc831ai_ioctl(sd, cmd, inf);
|
|
if (!ret) {
|
|
if (copy_to_user(up, inf, sizeof(*inf))) {
|
|
kfree(inf);
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
kfree(inf);
|
|
break;
|
|
case RKMODULE_AWB_CFG:
|
|
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
|
|
if (!cfg) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
if (copy_from_user(cfg, up, sizeof(*cfg))) {
|
|
kfree(cfg);
|
|
return -EFAULT;
|
|
}
|
|
ret = sc831ai_ioctl(sd, cmd, cfg);
|
|
kfree(cfg);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = sc831ai_ioctl(sd, cmd, hdr);
|
|
if (!ret) {
|
|
if (copy_to_user(up, hdr, sizeof(*hdr))) {
|
|
kfree(hdr);
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
kfree(hdr);
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
if (copy_from_user(hdr, up, sizeof(*hdr))) {
|
|
kfree(hdr);
|
|
return -EFAULT;
|
|
}
|
|
ret = sc831ai_ioctl(sd, cmd, hdr);
|
|
kfree(hdr);
|
|
break;
|
|
case PREISP_CMD_SET_HDRAE_EXP:
|
|
hdrae = kzalloc(sizeof(*hdrae), GFP_KERNEL);
|
|
if (!hdrae) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
if (copy_from_user(hdrae, up, sizeof(*hdrae))) {
|
|
kfree(hdrae);
|
|
return -EFAULT;
|
|
}
|
|
ret = sc831ai_ioctl(sd, cmd, hdrae);
|
|
kfree(hdrae);
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
if (copy_from_user(&stream, up, sizeof(u32)))
|
|
return -EFAULT;
|
|
ret = sc831ai_ioctl(sd, cmd, &stream);
|
|
break;
|
|
case RKMODULE_GET_SONY_BRL:
|
|
ret = sc831ai_ioctl(sd, cmd, &brl);
|
|
if (!ret) {
|
|
if (copy_to_user(up, &brl, sizeof(u32)))
|
|
return -EFAULT;
|
|
}
|
|
break;
|
|
case RKMODULE_GET_CHANNEL_INFO:
|
|
ch_info = kzalloc(sizeof(*ch_info), GFP_KERNEL);
|
|
if (!ch_info) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = sc831ai_ioctl(sd, cmd, ch_info);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, ch_info, sizeof(*ch_info));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(ch_info);
|
|
break;
|
|
case RKMODULE_GET_CSI_DPHY_PARAM:
|
|
dphy_param = kzalloc(sizeof(*dphy_param), GFP_KERNEL);
|
|
if (!dphy_param) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = sc831ai_ioctl(sd, cmd, dphy_param);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, dphy_param, sizeof(*dphy_param));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(dphy_param);
|
|
break;
|
|
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int __sc831ai_start_stream(struct sc831ai *sc831ai)
|
|
{
|
|
int ret;
|
|
|
|
if (!sc831ai->is_thunderboot) {
|
|
ret = sc831ai_write_array(sc831ai->client, sc831ai->cur_mode->reg_list);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = __v4l2_ctrl_handler_setup(&sc831ai->ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
/* In case these controls are set before streaming */
|
|
if (sc831ai->has_init_exp && sc831ai->cur_mode->hdr_mode != NO_HDR) {
|
|
ret = sc831ai_ioctl(&sc831ai->subdev, PREISP_CMD_SET_HDRAE_EXP,
|
|
&sc831ai->init_hdrae_exp);
|
|
if (ret) {
|
|
dev_err(&sc831ai->client->dev,
|
|
"init exp fail in hdr mode\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
return sc831ai_write_reg(sc831ai->client, SC831AI_REG_CTRL_MODE,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_MODE_STREAMING);
|
|
}
|
|
|
|
static int __sc831ai_stop_stream(struct sc831ai *sc831ai)
|
|
{
|
|
sc831ai->has_init_exp = false;
|
|
if (sc831ai->is_thunderboot)
|
|
sc831ai->is_first_streamoff = true;
|
|
return sc831ai_write_reg(sc831ai->client, SC831AI_REG_CTRL_MODE,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_MODE_SW_STANDBY);
|
|
}
|
|
|
|
static int __sc831ai_power_on(struct sc831ai *sc831ai);
|
|
static int sc831ai_s_stream(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
struct i2c_client *client = sc831ai->client;
|
|
int ret = 0;
|
|
|
|
dev_info(&sc831ai->client->dev,
|
|
"s_stream: %d. %dx%d, hdr: %d, bpp: %d\n", on,
|
|
sc831ai->cur_mode->width, sc831ai->cur_mode->height,
|
|
sc831ai->cur_mode->hdr_mode, sc831ai->cur_mode->bpp);
|
|
|
|
mutex_lock(&sc831ai->mutex);
|
|
on = !!on;
|
|
if (on == sc831ai->streaming)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
if (sc831ai->is_thunderboot && rkisp_tb_get_state() == RKISP_TB_NG) {
|
|
sc831ai->is_thunderboot = false;
|
|
__sc831ai_power_on(sc831ai);
|
|
}
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
ret = __sc831ai_start_stream(sc831ai);
|
|
if (ret) {
|
|
v4l2_err(sd, "start stream failed while write regs\n");
|
|
pm_runtime_put(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
__sc831ai_stop_stream(sc831ai);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
sc831ai->streaming = on;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&sc831ai->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int sc831ai_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
struct i2c_client *client = sc831ai->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&sc831ai->mutex);
|
|
|
|
/* If the power state is not modified - no work to do. */
|
|
if (sc831ai->power_on == !!on)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
if (!sc831ai->is_thunderboot) {
|
|
ret |= sc831ai_write_reg(sc831ai->client,
|
|
SC831AI_SOFTWARE_RESET_REG,
|
|
SC831AI_REG_VALUE_08BIT, 0x01);
|
|
if (ret) {
|
|
v4l2_err(sd, "could not set init registers\n");
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
usleep_range(100, 200);
|
|
}
|
|
sc831ai->power_on = true;
|
|
} else {
|
|
pm_runtime_put(&client->dev);
|
|
sc831ai->power_on = false;
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&sc831ai->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Calculate the delay in us by clock rate and clock cycles */
|
|
static inline u32 sc831ai_cal_delay(u32 cycles)
|
|
{
|
|
return DIV_ROUND_UP(cycles, SC831AI_XVCLK_FREQ / 1000 / 1000);
|
|
}
|
|
|
|
static int __sc831ai_power_on(struct sc831ai *sc831ai)
|
|
{
|
|
int ret;
|
|
u32 delay_us;
|
|
struct device *dev = &sc831ai->client->dev;
|
|
|
|
if (!IS_ERR_OR_NULL(sc831ai->pins_default)) {
|
|
ret = pinctrl_select_state(sc831ai->pinctrl,
|
|
sc831ai->pins_default);
|
|
if (ret < 0)
|
|
dev_err(dev, "could not set pins\n");
|
|
}
|
|
|
|
ret = clk_set_rate(sc831ai->xvclk, SC831AI_XVCLK_FREQ);
|
|
if (ret < 0)
|
|
dev_warn(dev, "Failed to set xvclk rate 24MHz\n");
|
|
if (clk_get_rate(sc831ai->xvclk) != SC831AI_XVCLK_FREQ)
|
|
dev_warn(dev, "xvclk mismatched\n");
|
|
ret = clk_prepare_enable(sc831ai->xvclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable xvclk\n");
|
|
goto err_clk;
|
|
}
|
|
|
|
cam_sw_regulator_bulk_init(sc831ai->cam_sw_inf, SC831AI_NUM_SUPPLIES, sc831ai->supplies);
|
|
|
|
if (sc831ai->is_thunderboot)
|
|
return 0;
|
|
|
|
if (!IS_ERR(sc831ai->reset_gpio))
|
|
gpiod_direction_output(sc831ai->reset_gpio, 0);
|
|
|
|
ret = regulator_bulk_enable(SC831AI_NUM_SUPPLIES, sc831ai->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulators\n");
|
|
goto disable_clk;
|
|
}
|
|
|
|
if (!IS_ERR(sc831ai->reset_gpio))
|
|
gpiod_direction_output(sc831ai->reset_gpio, 1);
|
|
|
|
usleep_range(5000, 10000);
|
|
if (!IS_ERR(sc831ai->pwdn_gpio))
|
|
gpiod_direction_output(sc831ai->pwdn_gpio, 1);
|
|
|
|
if (!IS_ERR(sc831ai->reset_gpio))
|
|
usleep_range(6000, 8000);
|
|
else
|
|
usleep_range(12000, 16000);
|
|
|
|
/* 8192 cycles prior to first SCCB transaction */
|
|
delay_us = sc831ai_cal_delay(8192);
|
|
usleep_range(delay_us, delay_us * 2);
|
|
return 0;
|
|
err_clk:
|
|
if (!IS_ERR(sc831ai->reset_gpio))
|
|
gpiod_direction_output(sc831ai->reset_gpio, 0);
|
|
disable_clk:
|
|
clk_disable_unprepare(sc831ai->xvclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __sc831ai_power_off(struct sc831ai *sc831ai)
|
|
{
|
|
int ret;
|
|
struct device *dev = &sc831ai->client->dev;
|
|
|
|
clk_disable_unprepare(sc831ai->xvclk);
|
|
|
|
if (sc831ai->is_thunderboot) {
|
|
if (sc831ai->is_first_streamoff) {
|
|
sc831ai->is_thunderboot = false;
|
|
sc831ai->is_first_streamoff = false;
|
|
} else {
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(sc831ai->pwdn_gpio))
|
|
gpiod_direction_output(sc831ai->pwdn_gpio, 0);
|
|
|
|
if (!IS_ERR(sc831ai->reset_gpio))
|
|
gpiod_direction_output(sc831ai->reset_gpio, 0);
|
|
|
|
if (!IS_ERR_OR_NULL(sc831ai->pins_sleep)) {
|
|
ret = pinctrl_select_state(sc831ai->pinctrl,
|
|
sc831ai->pins_sleep);
|
|
if (ret < 0)
|
|
dev_dbg(dev, "could not set pins\n");
|
|
}
|
|
regulator_bulk_disable(SC831AI_NUM_SUPPLIES, sc831ai->supplies);
|
|
}
|
|
|
|
#if IS_REACHABLE(CONFIG_VIDEO_CAM_SLEEP_WAKEUP)
|
|
static int __maybe_unused sc831ai_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
cam_sw_prepare_wakeup(sc831ai->cam_sw_inf, dev);
|
|
|
|
usleep_range(4000, 5000);
|
|
cam_sw_write_array(sc831ai->cam_sw_inf);
|
|
|
|
if (__v4l2_ctrl_handler_setup(&sc831ai->ctrl_handler))
|
|
dev_err(dev, "__v4l2_ctrl_handler_setup fail!");
|
|
|
|
if (sc831ai->has_init_exp && sc831ai->cur_mode != NO_HDR) { // hdr mode
|
|
ret = sc831ai_ioctl(&sc831ai->subdev, PREISP_CMD_SET_HDRAE_EXP,
|
|
&sc831ai->cam_sw_inf->hdr_ae);
|
|
if (ret) {
|
|
dev_err(&sc831ai->client->dev, "set exp fail in hdr mode\n");
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused sc831ai_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
cam_sw_write_array_cb_init(sc831ai->cam_sw_inf, client,
|
|
(void *)sc831ai->cur_mode->reg_list,
|
|
(sensor_write_array)sc831ai_write_array);
|
|
cam_sw_prepare_sleep(sc831ai->cam_sw_inf);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define sc831ai_resume NULL
|
|
#define sc831ai_suspend NULL
|
|
#endif
|
|
|
|
static int sc831ai_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
return __sc831ai_power_on(sc831ai);
|
|
}
|
|
|
|
static int sc831ai_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
__sc831ai_power_off(sc831ai);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static int sc831ai_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->pad, 0);
|
|
const struct sc831ai_mode *def_mode = &supported_modes[0];
|
|
|
|
mutex_lock(&sc831ai->mutex);
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = def_mode->width;
|
|
try_fmt->height = def_mode->height;
|
|
try_fmt->code = def_mode->bus_fmt;
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
mutex_unlock(&sc831ai->mutex);
|
|
/* No crop or compose */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
sc831ai_enum_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
if (fie->index >= sc831ai->cfg_num)
|
|
return -EINVAL;
|
|
|
|
fie->code = supported_modes[fie->index].bus_fmt;
|
|
fie->width = supported_modes[fie->index].width;
|
|
fie->height = supported_modes[fie->index].height;
|
|
fie->interval = supported_modes[fie->index].max_fps;
|
|
fie->reserved[0] = supported_modes[fie->index].hdr_mode;
|
|
return 0;
|
|
}
|
|
|
|
#define CROP_START(SRC, DST) (((SRC) - (DST)) / 2 / 4 * 4)
|
|
#define DST_WIDTH_3840 3840
|
|
#define DST_HEIGHT_2160 2160
|
|
#define DST_WIDTH_1920 1920
|
|
#define DST_HEIGHT_1080 1080
|
|
|
|
static int sc831ai_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) {
|
|
if (sc831ai->cur_mode->width == 3856) {
|
|
sel->r.left = CROP_START(sc831ai->cur_mode->width,
|
|
DST_WIDTH_3840);
|
|
sel->r.width = DST_WIDTH_3840;
|
|
sel->r.top = CROP_START(sc831ai->cur_mode->height,
|
|
DST_HEIGHT_2160);
|
|
sel->r.height = DST_HEIGHT_2160;
|
|
} else if (sc831ai->cur_mode->width == 1944) {
|
|
sel->r.left = CROP_START(sc831ai->cur_mode->width,
|
|
DST_WIDTH_1920);
|
|
sel->r.width = DST_WIDTH_1920;
|
|
sel->r.top = CROP_START(sc831ai->cur_mode->height,
|
|
DST_HEIGHT_1080);
|
|
sel->r.height = DST_HEIGHT_1080;
|
|
} else {
|
|
sel->r.left = CROP_START(sc831ai->cur_mode->width,
|
|
sc831ai->cur_mode->width);
|
|
sel->r.width = sc831ai->cur_mode->width;
|
|
sel->r.top = CROP_START(sc831ai->cur_mode->height,
|
|
sc831ai->cur_mode->height);
|
|
sel->r.height = sc831ai->cur_mode->height;
|
|
}
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct dev_pm_ops sc831ai_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(sc831ai_runtime_suspend,
|
|
sc831ai_runtime_resume, NULL)
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(sc831ai_suspend, sc831ai_resume)
|
|
};
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static const struct v4l2_subdev_internal_ops sc831ai_internal_ops = {
|
|
.open = sc831ai_open,
|
|
};
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops sc831ai_core_ops = {
|
|
.s_power = sc831ai_s_power,
|
|
.ioctl = sc831ai_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl32 = sc831ai_compat_ioctl32,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops sc831ai_video_ops = {
|
|
.s_stream = sc831ai_s_stream,
|
|
.g_frame_interval = sc831ai_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops sc831ai_pad_ops = {
|
|
.enum_mbus_code = sc831ai_enum_mbus_code,
|
|
.enum_frame_size = sc831ai_enum_frame_sizes,
|
|
.enum_frame_interval = sc831ai_enum_frame_interval,
|
|
.get_fmt = sc831ai_get_fmt,
|
|
.set_fmt = sc831ai_set_fmt,
|
|
.get_selection = sc831ai_get_selection,
|
|
.get_mbus_config = sc831ai_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops sc831ai_subdev_ops = {
|
|
.core = &sc831ai_core_ops,
|
|
.video = &sc831ai_video_ops,
|
|
.pad = &sc831ai_pad_ops,
|
|
};
|
|
|
|
static void sc831ai_modify_fps_info(struct sc831ai *sc831ai)
|
|
{
|
|
const struct sc831ai_mode *mode = sc831ai->cur_mode;
|
|
|
|
sc831ai->cur_fps.denominator =
|
|
mode->max_fps.denominator * sc831ai->cur_vts / mode->vts_def;
|
|
}
|
|
|
|
static int sc831ai_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct sc831ai *sc831ai =
|
|
container_of(ctrl->handler, struct sc831ai, ctrl_handler);
|
|
struct i2c_client *client = sc831ai->client;
|
|
s64 max;
|
|
u8 again, dgain, again_fine, dgain_fine;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VBLANK:
|
|
/* Update max exposure while meeting expected vblanking */
|
|
max = sc831ai->cur_mode->height + ctrl->val - 4;
|
|
__v4l2_ctrl_modify_range(sc831ai->exposure,
|
|
sc831ai->exposure->minimum, max,
|
|
sc831ai->exposure->step,
|
|
sc831ai->exposure->default_value);
|
|
break;
|
|
}
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
if (sc831ai->cur_mode->hdr_mode != NO_HDR)
|
|
goto out_ctrl;
|
|
val = ctrl->val << 1;
|
|
ret = sc831ai_write_reg(sc831ai->client, SC831AI_REG_EXP_LONG_H,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_FETCH_EXP_H(val));
|
|
ret |= sc831ai_write_reg(sc831ai->client,
|
|
SC831AI_REG_EXP_LONG_M,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_FETCH_EXP_M(val));
|
|
ret |= sc831ai_write_reg(sc831ai->client,
|
|
SC831AI_REG_EXP_LONG_L,
|
|
SC831AI_REG_VALUE_08BIT,
|
|
SC831AI_FETCH_EXP_L(val));
|
|
dev_dbg(&client->dev, "set exposure 0x%x\n", ctrl->val);
|
|
break;
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
if (sc831ai->cur_mode->hdr_mode != NO_HDR)
|
|
goto out_ctrl;
|
|
sc831ai_get_gain_reg(ctrl->val, &again, &dgain, &again_fine,
|
|
&dgain_fine);
|
|
dev_dbg(&client->dev,
|
|
"recv_gain:%d set again 0x%x, again_fine 0x%x, set dgain 0x%x, dgain_fine 0x%x\n",
|
|
ctrl->val, again, again_fine, dgain, dgain_fine);
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_REG_AGAIN,
|
|
SC831AI_REG_VALUE_08BIT, again);
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_REG_GAIN_FINE,
|
|
SC831AI_REG_VALUE_08BIT, again_fine);
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_REG_DGAIN,
|
|
SC831AI_REG_VALUE_08BIT, dgain);
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_REG_DGAIN_FINE,
|
|
SC831AI_REG_VALUE_08BIT, dgain_fine);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
ret = sc831ai_write_reg(sc831ai->client, SC831AI_REG_VTS,
|
|
SC831AI_REG_VALUE_16BIT,
|
|
ctrl->val + sc831ai->cur_mode->height);
|
|
if (!ret)
|
|
sc831ai->cur_vts =
|
|
ctrl->val + sc831ai->cur_mode->height;
|
|
sc831ai_modify_fps_info(sc831ai);
|
|
dev_dbg(&client->dev, "set vblank 0x%x\n", ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = sc831ai_enable_test_pattern(sc831ai, ctrl->val);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ret = sc831ai_read_reg(sc831ai->client, SC831AI_FLIP_REG,
|
|
SC831AI_REG_VALUE_08BIT, &val);
|
|
if (ret)
|
|
break;
|
|
if (ctrl->val)
|
|
val |= SC831AI_MIRROR_MASK;
|
|
else
|
|
val &= ~SC831AI_MIRROR_MASK;
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_FLIP_REG,
|
|
SC831AI_REG_VALUE_08BIT, val);
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
ret = sc831ai_read_reg(sc831ai->client, SC831AI_FLIP_REG,
|
|
SC831AI_REG_VALUE_08BIT, &val);
|
|
if (ret)
|
|
break;
|
|
if (ctrl->val)
|
|
val |= SC831AI_FLIP_MASK;
|
|
else
|
|
val &= ~SC831AI_FLIP_MASK;
|
|
ret |= sc831ai_write_reg(sc831ai->client, SC831AI_FLIP_REG,
|
|
SC831AI_REG_VALUE_08BIT, val);
|
|
break;
|
|
default:
|
|
dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
|
|
__func__, ctrl->id, ctrl->val);
|
|
break;
|
|
}
|
|
|
|
out_ctrl:
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops sc831ai_ctrl_ops = {
|
|
.s_ctrl = sc831ai_set_ctrl,
|
|
};
|
|
|
|
static int sc831ai_initialize_controls(struct sc831ai *sc831ai)
|
|
{
|
|
const struct sc831ai_mode *mode;
|
|
struct v4l2_ctrl_handler *handler;
|
|
s64 exposure_max, vblank_def;
|
|
u64 pixel_rate = 0;
|
|
u32 h_blank;
|
|
int ret;
|
|
|
|
handler = &sc831ai->ctrl_handler;
|
|
mode = sc831ai->cur_mode;
|
|
ret = v4l2_ctrl_handler_init(handler, 9);
|
|
if (ret)
|
|
return ret;
|
|
handler->lock = &sc831ai->mutex;
|
|
|
|
sc831ai->link_freq = v4l2_ctrl_new_int_menu(
|
|
handler, NULL, V4L2_CID_LINK_FREQ, 0, 0, link_freq_items);
|
|
v4l2_ctrl_s_ctrl(sc831ai->link_freq, mode->mipi_freq_idx);
|
|
|
|
/* pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */
|
|
pixel_rate = (u32)link_freq_items[mode->mipi_freq_idx] / mode->bpp * 2 *
|
|
SC831AI_2LANES;
|
|
sc831ai->pixel_rate =
|
|
v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 0,
|
|
SC831AI_MAX_PIXEL_RATE, 1, pixel_rate);
|
|
|
|
h_blank = mode->hts_def - mode->width;
|
|
sc831ai->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
|
|
h_blank, h_blank, 1, h_blank);
|
|
if (sc831ai->hblank)
|
|
sc831ai->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
vblank_def = mode->vts_def - mode->height;
|
|
sc831ai->vblank =
|
|
v4l2_ctrl_new_std(handler, &sc831ai_ctrl_ops, V4L2_CID_VBLANK,
|
|
vblank_def, SC831AI_VTS_MAX - mode->height, 1,
|
|
vblank_def);
|
|
|
|
exposure_max = mode->vts_def - 4; /*vts_def 0x08ca=2250*/
|
|
sc831ai->exposure =
|
|
v4l2_ctrl_new_std(handler, &sc831ai_ctrl_ops, V4L2_CID_EXPOSURE,
|
|
SC831AI_EXPOSURE_MIN, exposure_max,
|
|
SC831AI_EXPOSURE_STEP,
|
|
mode->exp_def); /*exp_def 0x08c0=2240*/
|
|
|
|
sc831ai->anal_a_gain =
|
|
v4l2_ctrl_new_std(handler, &sc831ai_ctrl_ops,
|
|
V4L2_CID_ANALOGUE_GAIN, SC831AI_GAIN_MIN,
|
|
SC831AI_GAIN_MAX, SC831AI_GAIN_STEP,
|
|
SC831AI_GAIN_DEFAULT);
|
|
|
|
sc831ai->test_pattern = v4l2_ctrl_new_std_menu_items(
|
|
handler, &sc831ai_ctrl_ops, V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(sc831ai_test_pattern_menu) - 1, 0, 0,
|
|
sc831ai_test_pattern_menu);
|
|
|
|
v4l2_ctrl_new_std(handler, &sc831ai_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1,
|
|
0);
|
|
v4l2_ctrl_new_std(handler, &sc831ai_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1,
|
|
0);
|
|
|
|
if (handler->error) {
|
|
ret = handler->error;
|
|
dev_err(&sc831ai->client->dev, "Failed to init controls(%d)\n",
|
|
ret);
|
|
goto err_free_handler;
|
|
}
|
|
|
|
sc831ai->subdev.ctrl_handler = handler;
|
|
sc831ai->has_init_exp = false;
|
|
sc831ai->cur_fps = mode->max_fps;
|
|
sc831ai->cur_vts = mode->vts_def;
|
|
|
|
return 0;
|
|
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(handler);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sc831ai_check_sensor_id(struct sc831ai *sc831ai,
|
|
struct i2c_client *client)
|
|
{
|
|
struct device *dev = &sc831ai->client->dev;
|
|
u32 id = 0;
|
|
int ret;
|
|
|
|
if (sc831ai->is_thunderboot) {
|
|
dev_info(dev, "Enable thunderboot mode, skip sensor id check\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = sc831ai_read_reg(client, SC831AI_REG_CHIP_ID,
|
|
SC831AI_REG_VALUE_16BIT, &id);
|
|
if (id != CHIP_ID) {
|
|
dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(dev, "Detected sc831ai id %06x\n", CHIP_ID);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sc831ai_configure_regulators(struct sc831ai *sc831ai)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < SC831AI_NUM_SUPPLIES; i++)
|
|
sc831ai->supplies[i].supply = sc831ai_supply_names[i];
|
|
|
|
return devm_regulator_bulk_get(&sc831ai->client->dev,
|
|
SC831AI_NUM_SUPPLIES, sc831ai->supplies);
|
|
}
|
|
|
|
static int sc831ai_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct sc831ai *sc831ai;
|
|
struct v4l2_subdev *sd;
|
|
char facing[2];
|
|
int ret;
|
|
u32 i, hdr_mode = 0;
|
|
|
|
dev_info(dev, "driver version: %02x.%02x.%02x", DRIVER_VERSION >> 16,
|
|
(DRIVER_VERSION & 0xff00) >> 8, DRIVER_VERSION & 0x00ff);
|
|
|
|
sc831ai = devm_kzalloc(dev, sizeof(*sc831ai), GFP_KERNEL);
|
|
if (!sc831ai)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
|
|
&sc831ai->module_index);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
|
|
&sc831ai->module_facing);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
|
|
&sc831ai->module_name);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
|
|
&sc831ai->len_name);
|
|
if (ret) {
|
|
dev_err(dev, "could not get module information!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, OF_CAMERA_HDR_MODE, &hdr_mode);
|
|
if (ret) {
|
|
hdr_mode = NO_HDR;
|
|
dev_warn(dev, " Get hdr mode failed! no hdr default\n");
|
|
}
|
|
|
|
sc831ai->is_thunderboot = IS_ENABLED(CONFIG_VIDEO_ROCKCHIP_THUNDER_BOOT_ISP);
|
|
|
|
sc831ai->client = client;
|
|
sc831ai->cfg_num = ARRAY_SIZE(supported_modes);
|
|
for (i = 0; i < sc831ai->cfg_num; i++) {
|
|
if (hdr_mode == supported_modes[i].hdr_mode) {
|
|
sc831ai->cur_mode = &supported_modes[i];
|
|
break;
|
|
}
|
|
}
|
|
if (i == ARRAY_SIZE(supported_modes))
|
|
sc831ai->cur_mode = &supported_modes[0];
|
|
|
|
sc831ai->xvclk = devm_clk_get(dev, "xvclk");
|
|
if (IS_ERR(sc831ai->xvclk)) {
|
|
dev_err(dev, "Failed to get xvclk\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!sc831ai->is_thunderboot) {
|
|
sc831ai->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
sc831ai->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_LOW);
|
|
} else {
|
|
sc831ai->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
|
|
sc831ai->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_ASIS);
|
|
}
|
|
|
|
if (IS_ERR(sc831ai->reset_gpio))
|
|
dev_warn(dev, "Failed to get reset-gpios\n");
|
|
|
|
if (IS_ERR(sc831ai->pwdn_gpio))
|
|
dev_warn(dev, "Failed to get pwdn_gpios\n");
|
|
|
|
sc831ai->pinctrl = devm_pinctrl_get(dev);
|
|
if (!IS_ERR(sc831ai->pinctrl)) {
|
|
sc831ai->pins_default = pinctrl_lookup_state(
|
|
sc831ai->pinctrl, OF_CAMERA_PINCTRL_STATE_DEFAULT);
|
|
if (IS_ERR(sc831ai->pins_default))
|
|
dev_info(dev, "could not get default pinstate\n");
|
|
|
|
sc831ai->pins_sleep = pinctrl_lookup_state(
|
|
sc831ai->pinctrl, OF_CAMERA_PINCTRL_STATE_SLEEP);
|
|
if (IS_ERR(sc831ai->pins_sleep))
|
|
dev_info(dev, "could not get sleep pinstate\n");
|
|
} else {
|
|
dev_info(dev, "no pinctrl\n");
|
|
}
|
|
|
|
ret = sc831ai_configure_regulators(sc831ai);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get power regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&sc831ai->mutex);
|
|
|
|
sd = &sc831ai->subdev;
|
|
v4l2_i2c_subdev_init(sd, client, &sc831ai_subdev_ops);
|
|
ret = sc831ai_initialize_controls(sc831ai);
|
|
if (ret)
|
|
goto err_destroy_mutex;
|
|
|
|
ret = __sc831ai_power_on(sc831ai);
|
|
if (ret)
|
|
goto err_free_handler;
|
|
|
|
ret = sc831ai_check_sensor_id(sc831ai, client);
|
|
if (ret)
|
|
goto err_power_off;
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
sd->internal_ops = &sc831ai_internal_ops;
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
#endif
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
sc831ai->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ret = media_entity_pads_init(&sd->entity, 1, &sc831ai->pad);
|
|
if (ret < 0)
|
|
goto err_power_off;
|
|
#endif
|
|
|
|
if (!sc831ai->cam_sw_inf) {
|
|
sc831ai->cam_sw_inf = cam_sw_init();
|
|
cam_sw_clk_init(sc831ai->cam_sw_inf, sc831ai->xvclk, SC831AI_XVCLK_FREQ);
|
|
cam_sw_reset_pin_init(sc831ai->cam_sw_inf, sc831ai->reset_gpio, 0);
|
|
if (!IS_ERR(sc831ai->pwdn_gpio))
|
|
cam_sw_pwdn_pin_init(sc831ai->cam_sw_inf, sc831ai->pwdn_gpio, 1);
|
|
}
|
|
|
|
memset(facing, 0, sizeof(facing));
|
|
if (strcmp(sc831ai->module_facing, "back") == 0)
|
|
facing[0] = 'b';
|
|
else
|
|
facing[0] = 'f';
|
|
snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
|
|
sc831ai->module_index, facing, SC831AI_NAME,
|
|
dev_name(sd->dev));
|
|
|
|
ret = v4l2_async_register_subdev_sensor_common(sd);
|
|
if (ret) {
|
|
dev_err(dev, "v4l2 async register subdev failed\n");
|
|
goto err_clean_entity;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
if (sc831ai->is_thunderboot)
|
|
pm_runtime_get_sync(dev);
|
|
else
|
|
pm_runtime_idle(dev);
|
|
|
|
return 0;
|
|
|
|
err_clean_entity:
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
err_power_off:
|
|
__sc831ai_power_off(sc831ai);
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(&sc831ai->ctrl_handler);
|
|
err_destroy_mutex:
|
|
mutex_destroy(&sc831ai->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sc831ai_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct sc831ai *sc831ai = to_sc831ai(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
v4l2_ctrl_handler_free(&sc831ai->ctrl_handler);
|
|
mutex_destroy(&sc831ai->mutex);
|
|
|
|
cam_sw_deinit(sc831ai->cam_sw_inf);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
__sc831ai_power_off(sc831ai);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id sc831ai_of_match[] = {
|
|
{ .compatible = "smartsens,sc831ai" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sc831ai_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id sc831ai_match_id[] = {
|
|
{ "smartsens,sc831ai", 0 },
|
|
{},
|
|
};
|
|
|
|
static struct i2c_driver sc831ai_i2c_driver = {
|
|
.driver = {
|
|
.name = SC831AI_NAME,
|
|
.pm = &sc831ai_pm_ops,
|
|
.of_match_table = of_match_ptr(sc831ai_of_match),
|
|
},
|
|
.probe = &sc831ai_probe,
|
|
.remove = &sc831ai_remove,
|
|
.id_table = sc831ai_match_id,
|
|
};
|
|
|
|
static int __init sensor_mod_init(void)
|
|
{
|
|
return i2c_add_driver(&sc831ai_i2c_driver);
|
|
}
|
|
|
|
static void __exit sensor_mod_exit(void)
|
|
{
|
|
i2c_del_driver(&sc831ai_i2c_driver);
|
|
}
|
|
|
|
device_initcall_sync(sensor_mod_init);
|
|
module_exit(sensor_mod_exit);
|
|
|
|
MODULE_DESCRIPTION("smartsens,sc831ai sensor driver");
|
|
MODULE_LICENSE("GPL");
|