1775 lines
44 KiB
C
1775 lines
44 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* og02b10 driver
|
|
*
|
|
* Copyright (C) 2023 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* V0.0X01.0X00 first version.
|
|
*/
|
|
//#define DEBUG
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/version.h>
|
|
#include <linux/rk-camera-module.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-async.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/rk-preisp.h>
|
|
#include "../platform/rockchip/isp/rkisp_tb_helper.h"
|
|
|
|
#include <linux/of_gpio.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x00)
|
|
|
|
/* The base for the og driver controls.
|
|
* We reserve 16 controls for this driver.
|
|
*/
|
|
#define V4L2_CID_USER_OG_BASE (V4L2_CID_USER_BASE + 0x10c0)
|
|
#define V4L2_CID_OG_LOW_POWER_MODE (V4L2_CID_USER_OG_BASE + 0)
|
|
|
|
#define OG02B10_LANES 2
|
|
#define MIPI_FREQ_400M 400000000
|
|
#define PIXEL_RATE_WITH_400M (MIPI_FREQ_400M * 2 / 10 * OG02B10_LANES)
|
|
#define OG02B10_XVCLK_FREQ 24000000
|
|
|
|
#define OG02B10_SYS_CLK 80000000
|
|
#define OG02B10_VTS_MAX 0x14DDE
|
|
|
|
#define OG02B10_CHIP_ID0 0x20
|
|
#define OG02B10_CHIP_ID1 0xC0
|
|
#define OG02B10_CHIP_ID2 0xE0
|
|
#define OG02B10_REG_SC_SCCB_ID0 0x0107
|
|
#define OG02B10_REG_SC_SCCB_ID1 0x0109
|
|
#define OG02B10_REG_SC_SCCB_ID2 0x302B
|
|
|
|
#define OG02B10_GAIN_MIN 16
|
|
#define OG02B10_GAIN_MAX 988
|
|
#define OG02B10_GAIN_STEP 1
|
|
#define OG02B10_GAIN_DEFAULT 0x80
|
|
|
|
#define OG02B10_EXPOSURE_MIN 1
|
|
#define OG02B10_EXPOSURE_STEP 1
|
|
|
|
#define OG02B10_REG_GROUP_HOLD 0x3208
|
|
#define OG02B10_GROUP0_HOLD_START 0x00
|
|
#define OG02B10_GROUP0_HOLD_END 0x10
|
|
#define OG02B10_GROUP_LAUNCH 0xA0
|
|
|
|
#define OG02B10_REG_EXP_H 0x3501
|
|
#define OG02B10_REG_EXP_L 0x3502
|
|
|
|
#define OG02B10_REG_HTS_H 0x380C
|
|
#define OG02B10_REG_HTS_L 0x380D
|
|
#define OG02B10_REG_VTS_H 0x380E
|
|
#define OG02B10_REG_VTS_L 0x380F
|
|
|
|
#define OG02B10_REG_AGAIN_COARSE 0x3508
|
|
#define OG02B10_REG_AGAIN_FINE 0x3509
|
|
|
|
#define OG02B10_REG_DGAIN_COARSE 0x350A
|
|
#define OG02B10_REG_DGAIN_FINE_H 0x350B
|
|
#define OG02B10_REG_DGAIN_FINE_L 0x350C
|
|
|
|
#define OG02B10_REG_CTRL_MODE 0x0100
|
|
#define OG02B10_MODE_SW_STANDBY 0x0
|
|
#define OG02B10_MODE_STREAMING BIT(0)
|
|
|
|
#define OG02B10_REG_SOFTWARE_RESET 0x0103
|
|
#define OG02B10_SOFTWARE_RESET_VAL 0x1
|
|
|
|
#define OG02B10_REG_TEST_PATTERN 0x5E00
|
|
#define OG02B10_TEST_PATTERN_DISABLE_VAL 0x00
|
|
#define OG02B10_TEST_PATTERN_ENABLE_VAL 0x80
|
|
|
|
#define OG02B10_REG_FILP 0x3820
|
|
#define OG02B10_REG_MIRROR 0x3821
|
|
#define OG02B10_FILP_ENABLE_VAL 0x44
|
|
#define OG02B10_FILP_DISABLE_VAL 0x00
|
|
#define OG02B10_MIRROR_ENABLE_VAL 0x04
|
|
#define OG02B10_MIRROR_DISABLE_VAL 0x00
|
|
|
|
|
|
//disable FSIN output, bit operation, set 0x3006[1]=0
|
|
//enable FSIN output, bit operation, set 0x3006[1]=1
|
|
#define OG02B10_REG_IO_PAD_OUT_EN 0x3006
|
|
#define OG02B10_IO_PAD_OUT_EN_DEFAULT 0x0a
|
|
#define OG02B10_FSIN_OUTPUT_ENABLE BIT(1)
|
|
|
|
//r_frame_on_num(active frames after wake-up)
|
|
#define OG02B10_REG_R_FRAME_ON_NUM 0x303F
|
|
|
|
#define OG02B10_REG_SCCB_SEL 0x31FF
|
|
#define OG02B10_CLOCKLESS_SCCB 0X0
|
|
|
|
#define OG02B10_REG_LOW_POWER_MODE_CTRL 0x3030
|
|
#define OG02B10_LOW_FRAME_RATE_VAL BIT(4)
|
|
#define OG02B10_EXTERNAL_TRIGGER_VAL BIT(2)
|
|
|
|
#define OG02B10_REG_POWER_CTRL_OPTIONS 0x4F00
|
|
#define OG02B10_NORMAL_MODE 0
|
|
#define OG02B10_LOW_POWER_MODE 1
|
|
|
|
#define OG02B10_NAME "og02b10"
|
|
|
|
#define OF_CAMERA_HDR_MODE "rockchip,camera-hdr-mode"
|
|
#define OF_CAMERA_PINCTRL_STATE_DEFAULT "default"
|
|
#define OF_CAMERA_PINCTRL_STATE_MCLK "mclk"
|
|
|
|
#define REG_NULL 0xFFFF
|
|
|
|
static const char * const OG02B10_supply_names[] = {
|
|
"avdd", /* Analog power */
|
|
"dovdd", /* Digital I/O power */
|
|
"dvdd", /* Digital core power */
|
|
};
|
|
|
|
#define OG02B10_NUM_SUPPLIES ARRAY_SIZE(OG02B10_supply_names)
|
|
|
|
enum og02b10_low_power_mode_em {
|
|
LOW_POWER_MODE_DISABLE = 0,
|
|
LOW_FRAME_RATE_MODE,
|
|
INTERNAL_TRIGGER_MODE,
|
|
EXTERNAL_TRIGGER_MODE,
|
|
LOW_POWER_MODE_MAX
|
|
};
|
|
|
|
struct regval {
|
|
u16 addr;
|
|
u8 val;
|
|
};
|
|
|
|
struct og02b10_mode {
|
|
u32 bus_fmt;
|
|
u32 width;
|
|
u32 height;
|
|
struct v4l2_fract max_fps;
|
|
u32 hts_def;
|
|
u32 vts_def;
|
|
u32 exp_def;
|
|
const struct regval *reg_list;
|
|
u32 hdr_mode;
|
|
u32 vc[PAD_MAX];
|
|
};
|
|
|
|
struct og02b10 {
|
|
struct i2c_client *client;
|
|
struct clk *xvclk;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *pwdn_gpio;
|
|
struct regulator_bulk_data supplies[OG02B10_NUM_SUPPLIES];
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_mclk;
|
|
|
|
struct v4l2_subdev subdev;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *anal_gain;
|
|
struct v4l2_ctrl *digi_gain;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *h_flip;
|
|
struct v4l2_ctrl *v_flip;
|
|
struct v4l2_ctrl *test_pattern;
|
|
struct v4l2_ctrl *low_power_mode;
|
|
struct mutex mutex;
|
|
bool streaming;
|
|
bool power_on;
|
|
bool slave_mode;
|
|
|
|
const struct og02b10_mode *cur_mode;
|
|
u32 cfg_num;
|
|
u32 module_index;
|
|
const char *module_facing;
|
|
const char *module_name;
|
|
const char *len_name;
|
|
bool has_init_exp;
|
|
struct preisp_hdrae_exp_s init_hdrae_exp;
|
|
};
|
|
|
|
#define to_og02b10(sd) container_of(sd, struct og02b10, subdev)
|
|
|
|
/*
|
|
* Xclk 24Mhz
|
|
*/
|
|
static const struct regval og02b10_linear10bit_1600x1200_regs[] = {
|
|
// SOFTWARE RESET(0:off, 1:on)
|
|
{0x0103, 0x01},
|
|
// MODE SELECT(0:software_standby, 1:streaming)
|
|
{0x0100, 0x00},
|
|
//ENTER SAFE MODE(0:Keep, 1:Enter safe mode)
|
|
{0x010c, 0x02},
|
|
//ENTER SOFTWARE STANDBY(0:Keep, 1:Enter software standby)
|
|
{0x010b, 0x01},
|
|
|
|
// PLL control
|
|
{0x0300, 0x01},
|
|
{0x0302, 0x32},
|
|
{0x0303, 0x00},
|
|
{0x0304, 0x03},
|
|
{0x0305, 0x02},
|
|
{0x0306, 0x01},
|
|
{0x030d, 0x5a},
|
|
{0x030e, 0x04},
|
|
|
|
// SC registers
|
|
{0x3001, 0x02},
|
|
{0x3004, 0x00},
|
|
{0x3005, 0x00},
|
|
{0x3006, 0x0a},
|
|
{0x3011, 0x0d},
|
|
{0x3014, 0x04},
|
|
{0x301c, 0xf0},
|
|
{0x3020, 0x20},
|
|
{0x302c, 0x00},
|
|
{0x302d, 0x00},
|
|
{0x302e, 0x00},
|
|
{0x302f, 0x03},
|
|
{0x3030, 0x10},
|
|
|
|
{0x303f, 0x03},
|
|
|
|
// SCCB control registers
|
|
{0x3103, 0x00},
|
|
{0x3106, 0x08},
|
|
{0x31ff, 0x01},
|
|
|
|
//aec_pk registers
|
|
{0x3501, 0x05},
|
|
{0x3502, 0x7c},
|
|
{0x3506, 0x00},
|
|
{0x3507, 0x00},
|
|
|
|
//ana control registers
|
|
{0x3620, 0x67},
|
|
{0x3633, 0x78},
|
|
{0x3662, 0x65},
|
|
{0x3664, 0xb0},
|
|
{0x3666, 0x70},
|
|
{0x3670, 0x68},
|
|
{0x3674, 0x10},
|
|
{0x3675, 0x00},
|
|
{0x367e, 0x90},
|
|
{0x3680, 0x84},
|
|
{0x3683, 0x96},
|
|
{0x36a2, 0x04},
|
|
{0x36a3, 0x80},
|
|
{0x36b0, 0x00},
|
|
|
|
//sensor control registers
|
|
{0x3700, 0x35},
|
|
{0x3704, 0x39},
|
|
{0x370a, 0x50},
|
|
{0x3712, 0x00},
|
|
{0x3713, 0x02},
|
|
{0x3778, 0x00},
|
|
{0x379b, 0x01},
|
|
{0x379c, 0x10},
|
|
|
|
//timing control registers
|
|
// horizontal start
|
|
{0x3800, 0x00},
|
|
{0x3801, 0x00},
|
|
// vertical start
|
|
{0x3802, 0x00},
|
|
{0x3803, 0x00},
|
|
// horizontal end
|
|
{0x3804, 0x06},
|
|
{0x3805, 0x4f},
|
|
// vertical end
|
|
{0x3806, 0x05},
|
|
{0x3807, 0x23},
|
|
// ISP output
|
|
{0x3808, 0x06},
|
|
{0x3809, 0x40},
|
|
{0x380a, 0x04},
|
|
{0x380b, 0xb0},
|
|
// HTS VTS
|
|
{0x380c, 0x03},
|
|
{0x380d, 0xa8},
|
|
{0x380e, 0x0b},
|
|
{0x380f, 0x10},
|
|
// ISP X/Y WIN
|
|
{0x3810, 0x00},
|
|
{0x3811, 0x08},
|
|
{0x3812, 0x00},
|
|
{0x3813, 0x08},
|
|
// X/Y odd/even
|
|
{0x3814, 0x11},
|
|
{0x3815, 0x11},
|
|
// HSYNC start/end
|
|
{0x3816, 0x00},
|
|
{0x3817, 0x01},
|
|
{0x3818, 0x00},
|
|
{0x3819, 0x05},
|
|
// vflip
|
|
{0x3820, 0x00},
|
|
{0x3821, 0x00},
|
|
// grp_wr_start/grp_wr_start
|
|
{0x382b, 0x32},
|
|
// hts_global_tx
|
|
{0x382c, 0x0a},
|
|
{0x382d, 0xf8},
|
|
|
|
//global shutter control registers
|
|
{0x3881, 0x44},
|
|
{0x3882, 0x02},
|
|
{0x3883, 0x8c},
|
|
{0x3885, 0x07},
|
|
{0x389d, 0x03},
|
|
{0x38a6, 0x00},
|
|
{0x38a7, 0x01},
|
|
{0x38b3, 0x07},
|
|
{0x38b1, 0x00},
|
|
{0x38e5, 0x02},
|
|
{0x38e7, 0x00},
|
|
{0x38e8, 0x00},
|
|
{0x3910, 0xff},
|
|
{0x3911, 0xff},
|
|
{0x3912, 0x08},
|
|
{0x3913, 0x00},
|
|
{0x3914, 0x00},
|
|
{0x3915, 0x00},
|
|
{0x391c, 0x00},
|
|
{0x3920, 0xff},
|
|
{0x3921, 0x80},
|
|
{0x3922, 0x00},
|
|
{0x3923, 0x00},
|
|
{0x3924, 0x05},
|
|
{0x3925, 0x00},
|
|
{0x3926, 0x00},
|
|
{0x3927, 0x00},
|
|
{0x3928, 0x1a},
|
|
{0x392d, 0x03},
|
|
{0x392e, 0xa8},
|
|
{0x392f, 0x08},
|
|
|
|
//BLC control registers
|
|
{0x4001, 0x00},
|
|
{0x4003, 0x40},
|
|
{0x4008, 0x04},
|
|
{0x4009, 0x1b},
|
|
{0x400c, 0x04},
|
|
{0x400d, 0x1b},
|
|
{0x4010, 0xf4},
|
|
{0x4011, 0x00},
|
|
{0x4016, 0x00},
|
|
{0x4017, 0x04},
|
|
{0x4042, 0x11},
|
|
{0x4043, 0x70},
|
|
{0x4045, 0x00},
|
|
|
|
// TPM registers
|
|
{0x4409, 0x5f},
|
|
|
|
// column_sync registers
|
|
{0x4509, 0x00},
|
|
{0x450b, 0x00},
|
|
|
|
// VFIFO registers
|
|
{0x4600, 0x00},
|
|
{0x4601, 0xa0},
|
|
|
|
// DVP registers
|
|
{0x4708, 0x09},
|
|
{0x470c, 0x81},
|
|
{0x4710, 0x06},
|
|
{0x4711, 0x00},
|
|
|
|
// MIPI control registers
|
|
{0x4800, 0x00},
|
|
{0x481f, 0x30},
|
|
{0x4837, 0x14},
|
|
|
|
// PSV control registers
|
|
{0x4f00, 0x00},
|
|
{0x4f07, 0x00},
|
|
{0x4f08, 0x03},
|
|
{0x4f09, 0x08},
|
|
{0x4f0c, 0x05},
|
|
{0x4f0d, 0xb4},
|
|
{0x4f10, 0x00},
|
|
{0x4f11, 0x00},
|
|
{0x4f12, 0x07},
|
|
{0x4f13, 0xe2},
|
|
|
|
// isp_main control registers
|
|
{0x5000, 0x1f},
|
|
{0x5001, 0x20},
|
|
{0x5026, 0x00},
|
|
|
|
// isp_otp_dpc control registers
|
|
{0x5c00, 0x00},
|
|
{0x5c01, 0x2c},
|
|
{0x5c02, 0x00},
|
|
{0x5c03, 0x7f},
|
|
|
|
// isp_pre control registers
|
|
{0x5e00, 0x00},
|
|
{0x5e01, 0x41},
|
|
|
|
// GLOBAL_SHUTTER_CTRL_31
|
|
{0x38b1, 0x03},
|
|
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
/*
|
|
* The width and height must be configured to be
|
|
* the same as the current output resolution of the sensor.
|
|
* The input width of the isp needs to be 16 aligned.
|
|
* The input height of the isp needs to be 8 aligned.
|
|
* If the width or height does not meet the alignment rules,
|
|
* you can configure the cropping parameters with the following function to
|
|
* crop out the appropriate resolution.
|
|
* struct v4l2_subdev_pad_ops {
|
|
* .get_selection
|
|
* }
|
|
*/
|
|
static const struct og02b10_mode supported_modes[] = {
|
|
{
|
|
.bus_fmt = MEDIA_BUS_FMT_SBGGR10_1X10,
|
|
.width = 1600,
|
|
.height = 1200,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 300000,
|
|
},
|
|
/*
|
|
* line_time = h_size / pclk
|
|
* = hts_def / 80Mhz = 0x3a8 / 80Mhz = 0.0117ms
|
|
*
|
|
* exposure time = int_t * line_time
|
|
* = exp_def * line_time
|
|
* = 0x02ea * 0.0117ms
|
|
* = 8.7282ms
|
|
* max exposure time = vts_def * line_time
|
|
* = 0x0b10 * 0.0117ms
|
|
* = 33.1344ms
|
|
*/
|
|
.exp_def = 0x02ea,
|
|
.hts_def = 0x03a8,
|
|
.vts_def = 0x0b10,
|
|
.reg_list = og02b10_linear10bit_1600x1200_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.vc[PAD0] = V4L2_MBUS_CSI2_CHANNEL_0,
|
|
},
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
MIPI_FREQ_400M,
|
|
};
|
|
|
|
static int __og02b10_power_on(struct og02b10 *og02b10);
|
|
|
|
static int og02b10_check_sensor_id(struct og02b10 *og02b10,
|
|
struct i2c_client *client);
|
|
|
|
/* sensor register write */
|
|
static int og02b10_write_reg(struct i2c_client *client, u16 reg, u8 val)
|
|
{
|
|
struct i2c_msg msg;
|
|
u8 buf[3];
|
|
int ret;
|
|
|
|
buf[0] = (reg >> 8) & 0xFF;
|
|
buf[1] = reg & 0xFF;
|
|
buf[2] = val;
|
|
|
|
msg.addr = client->addr;
|
|
msg.flags = client->flags;
|
|
msg.buf = buf;
|
|
msg.len = sizeof(buf);
|
|
|
|
ret = i2c_transfer(client->adapter, &msg, 1);
|
|
if (ret >= 0)
|
|
return 0;
|
|
|
|
dev_err(&client->dev,
|
|
"og02b10 write reg(0x%x val:0x%x) failed !\n", reg, val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og02b10_write_array(struct i2c_client *client,
|
|
const struct regval *regs)
|
|
{
|
|
int i, ret = 0;
|
|
|
|
i = 0;
|
|
while (regs[i].addr != REG_NULL) {
|
|
ret = og02b10_write_reg(client, regs[i].addr, regs[i].val);
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s failed !\n", __func__);
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* sensor register read */
|
|
static int og02b10_read_reg(struct i2c_client *client, u16 reg, u8 *val)
|
|
{
|
|
struct i2c_msg msg[2];
|
|
u8 buf[2];
|
|
int ret;
|
|
|
|
buf[0] = (reg >> 8) & 0xFF;
|
|
buf[1] = reg & 0xFF;
|
|
|
|
msg[0].addr = client->addr;
|
|
msg[0].flags = client->flags;
|
|
msg[0].buf = buf;
|
|
msg[0].len = sizeof(buf);
|
|
|
|
msg[1].addr = client->addr;
|
|
msg[1].flags = client->flags | I2C_M_RD;
|
|
msg[1].buf = buf;
|
|
msg[1].len = 1;
|
|
|
|
ret = i2c_transfer(client->adapter, msg, 2);
|
|
if (ret >= 0) {
|
|
*val = buf[0];
|
|
return 0;
|
|
}
|
|
|
|
dev_err(&client->dev,
|
|
"og02b10 read reg(0x%x val:0x%x) failed !\n", reg, *val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og02b10_get_reso_dist(const struct og02b10_mode *mode,
|
|
struct v4l2_mbus_framefmt *framefmt)
|
|
{
|
|
return abs(mode->width - framefmt->width) +
|
|
abs(mode->height - framefmt->height);
|
|
}
|
|
|
|
static const struct og02b10_mode *
|
|
og02b10_find_best_fit(struct og02b10 *og02b10, struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
|
|
int dist;
|
|
int cur_best_fit = 0;
|
|
int cur_best_fit_dist = -1;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < og02b10->cfg_num; i++) {
|
|
dist = og02b10_get_reso_dist(&supported_modes[i], framefmt);
|
|
if ((cur_best_fit_dist == -1 || dist <= cur_best_fit_dist) &&
|
|
(supported_modes[i].bus_fmt == framefmt->code)) {
|
|
cur_best_fit_dist = dist;
|
|
cur_best_fit = i;
|
|
}
|
|
}
|
|
|
|
return &supported_modes[cur_best_fit];
|
|
}
|
|
|
|
static int og02b10_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
const struct og02b10_mode *mode;
|
|
s64 h_blank, v_blank;
|
|
u64 dst_link_freq = 0;
|
|
u64 dst_pixel_rate = 0;
|
|
|
|
mutex_lock(&og02b10->mutex);
|
|
mode = og02b10_find_best_fit(og02b10, fmt);
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
*v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
|
|
#else
|
|
mutex_unlock(&og02b10->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
og02b10->cur_mode = mode;
|
|
h_blank = mode->hts_def;
|
|
__v4l2_ctrl_modify_range(og02b10->hblank, h_blank,
|
|
h_blank, 1, h_blank);
|
|
|
|
v_blank = mode->vts_def;
|
|
__v4l2_ctrl_modify_range(og02b10->vblank, v_blank,
|
|
v_blank, 1, v_blank);
|
|
if (mode->hdr_mode == NO_HDR) {
|
|
if (mode->bus_fmt == MEDIA_BUS_FMT_SBGGR10_1X10) {
|
|
dst_link_freq = 0;
|
|
dst_pixel_rate = PIXEL_RATE_WITH_400M;
|
|
}
|
|
}
|
|
__v4l2_ctrl_s_ctrl_int64(og02b10->pixel_rate,
|
|
dst_pixel_rate);
|
|
__v4l2_ctrl_s_ctrl(og02b10->link_freq,
|
|
dst_link_freq);
|
|
}
|
|
|
|
mutex_unlock(&og02b10->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
const struct og02b10_mode *mode = og02b10->cur_mode;
|
|
|
|
mutex_lock(&og02b10->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
v4l2_info(sd, "get format try.\n");
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
|
|
#else
|
|
mutex_unlock(&og02b10->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->pad < PAD_MAX && mode->hdr_mode != NO_HDR)
|
|
fmt->reserved[0] = mode->vc[fmt->pad];
|
|
else
|
|
fmt->reserved[0] = mode->vc[PAD0];
|
|
}
|
|
mutex_unlock(&og02b10->mutex);
|
|
|
|
v4l2_info(sd, "get format, width: %d, height: %d, code: %d, field: %d.\n",
|
|
fmt->format.width, fmt->format.height,
|
|
fmt->format.code, fmt->format.field);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
code->code = og02b10->cur_mode->bus_fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_enum_frame_sizes(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
if (fse->index >= og02b10->cfg_num)
|
|
return -EINVAL;
|
|
|
|
if (fse->code != supported_modes[fse->index].bus_fmt)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = supported_modes[fse->index].width;
|
|
fse->max_height = supported_modes[fse->index].height;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_g_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
const struct og02b10_mode *mode = og02b10->cur_mode;
|
|
|
|
fi->interval = mode->max_fps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad,
|
|
struct v4l2_mbus_config *config)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
const struct og02b10_mode *mode = og02b10->cur_mode;
|
|
u32 val = 0;
|
|
|
|
if (mode->hdr_mode == NO_HDR)
|
|
val = 1 << (OG02B10_LANES - 1) |
|
|
V4L2_MBUS_CSI2_CHANNEL_0 |
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
|
|
|
|
if (mode->hdr_mode == HDR_X2)
|
|
val = 1 << (OG02B10_LANES - 1) |
|
|
V4L2_MBUS_CSI2_CHANNEL_0 |
|
|
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK |
|
|
V4L2_MBUS_CSI2_CHANNEL_1;
|
|
|
|
config->type = V4L2_MBUS_CSI2_DPHY;
|
|
config->flags = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void og02b10_get_module_inf(struct og02b10 *og02b10,
|
|
struct rkmodule_inf *inf)
|
|
{
|
|
memset(inf, 0, sizeof(*inf));
|
|
strscpy(inf->base.sensor, OG02B10_NAME, sizeof(inf->base.sensor));
|
|
strscpy(inf->base.module, og02b10->module_name,
|
|
sizeof(inf->base.module));
|
|
strscpy(inf->base.lens, og02b10->len_name, sizeof(inf->base.lens));
|
|
}
|
|
|
|
static long og02b10_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
struct rkmodule_hdr_cfg *hdr_cfg;
|
|
long ret = 0;
|
|
u32 stream = 0;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_SET_HDR_CFG:
|
|
v4l2_info(sd, "cmd: RKMODULE_SET_HDR_CFG\n");
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
if (hdr_cfg->hdr_mode != 0)
|
|
ret = -1;
|
|
break;
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
v4l2_info(sd, "cmd: RKMODULE_GET_MODULE_INFO\n");
|
|
og02b10_get_module_inf(og02b10, (struct rkmodule_inf *)arg);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
v4l2_info(sd, "cmd: RKMODULE_GET_HDR_CFG\n");
|
|
hdr_cfg = (struct rkmodule_hdr_cfg *)arg;
|
|
hdr_cfg->hdr_mode = og02b10->cur_mode->hdr_mode;
|
|
hdr_cfg->esp.mode = HDR_NORMAL_VC;
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
v4l2_info(sd, "cmd: RKMODULE_SET_QUICK_STREAM\n");
|
|
stream = *((u32 *)arg);
|
|
if (stream)
|
|
ret = og02b10_write_reg(og02b10->client, OG02B10_REG_CTRL_MODE,
|
|
OG02B10_MODE_STREAMING);
|
|
else
|
|
ret = og02b10_write_reg(og02b10->client, OG02B10_REG_CTRL_MODE,
|
|
OG02B10_MODE_SW_STANDBY);
|
|
break;
|
|
default:
|
|
v4l2_info(sd, "cmd missing\n");
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long og02b10_compat_ioctl32(struct v4l2_subdev *sd,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *up = compat_ptr(arg);
|
|
struct rkmodule_inf *inf;
|
|
struct rkmodule_awb_cfg *cfg;
|
|
struct rkmodule_hdr_cfg *hdr;
|
|
struct preisp_hdrae_exp_s *hdrae;
|
|
long ret;
|
|
u32 cg = 0;
|
|
u32 stream = 0;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
inf = kzalloc(sizeof(*inf), GFP_KERNEL);
|
|
if (!inf) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = og02b10_ioctl(sd, cmd, inf);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, inf, sizeof(*inf));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(inf);
|
|
break;
|
|
case RKMODULE_AWB_CFG:
|
|
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
|
|
if (!cfg) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(cfg, up, sizeof(*cfg));
|
|
if (!ret)
|
|
ret = og02b10_ioctl(sd, cmd, cfg);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(cfg);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = og02b10_ioctl(sd, cmd, hdr);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, hdr, sizeof(*hdr));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(hdr);
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(hdr, up, sizeof(*hdr));
|
|
if (!ret)
|
|
ret = og02b10_ioctl(sd, cmd, hdr);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(hdr);
|
|
break;
|
|
case PREISP_CMD_SET_HDRAE_EXP:
|
|
hdrae = kzalloc(sizeof(*hdrae), GFP_KERNEL);
|
|
if (!hdrae) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(hdrae, up, sizeof(*hdrae));
|
|
if (!ret)
|
|
ret = og02b10_ioctl(sd, cmd, hdrae);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(hdrae);
|
|
break;
|
|
case RKMODULE_SET_CONVERSION_GAIN:
|
|
ret = copy_from_user(&cg, up, sizeof(cg));
|
|
if (!ret)
|
|
ret = og02b10_ioctl(sd, cmd, &cg);
|
|
else
|
|
ret = -EFAULT;
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
ret = copy_from_user(&stream, up, sizeof(u32));
|
|
if (!ret)
|
|
ret = og02b10_ioctl(sd, cmd, &stream);
|
|
else
|
|
ret = -EFAULT;
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int __og02b10_start_stream(struct og02b10 *og02b10)
|
|
{
|
|
int ret;
|
|
|
|
ret = og02b10_write_array(og02b10->client, og02b10->cur_mode->reg_list);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* In case these controls are set before streaming */
|
|
ret = __v4l2_ctrl_handler_setup(&og02b10->ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usleep_range(1000, 5000);
|
|
|
|
if (!og02b10->slave_mode)
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_CTRL_MODE,
|
|
OG02B10_MODE_STREAMING);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __og02b10_stop_stream(struct og02b10 *og02b10)
|
|
{
|
|
og02b10->has_init_exp = false;
|
|
og02b10->slave_mode = false;
|
|
return og02b10_write_reg(og02b10->client, OG02B10_REG_CTRL_MODE, OG02B10_MODE_SW_STANDBY);
|
|
}
|
|
|
|
static int og02b10_s_stream(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
struct i2c_client *client = og02b10->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&og02b10->mutex);
|
|
on = !!on;
|
|
if (on == og02b10->streaming)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
v4l2_err(sd, "pm runtime get sync failed\n");
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
ret = __og02b10_start_stream(og02b10);
|
|
if (ret) {
|
|
v4l2_err(sd, "start stream failed while write regs\n");
|
|
pm_runtime_put(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
__og02b10_stop_stream(og02b10);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
og02b10->streaming = on;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&og02b10->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og02b10_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
struct i2c_client *client = og02b10->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&og02b10->mutex);
|
|
|
|
/* If the power state is not modified - no work to do. */
|
|
if (og02b10->power_on == !!on)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
usleep_range(100, 200);
|
|
|
|
og02b10->power_on = true;
|
|
} else {
|
|
pm_runtime_put(&client->dev);
|
|
og02b10->power_on = false;
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&og02b10->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __og02b10_power_on(struct og02b10 *og02b10)
|
|
{
|
|
int ret = 0;
|
|
struct device *dev = &og02b10->client->dev;
|
|
|
|
ret = clk_set_rate(og02b10->xvclk, OG02B10_XVCLK_FREQ);
|
|
if (ret < 0)
|
|
dev_warn(dev, "Failed to set xvclk rate (24MHz)\n");
|
|
if (clk_get_rate(og02b10->xvclk) != OG02B10_XVCLK_FREQ)
|
|
dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
|
|
ret = clk_prepare_enable(og02b10->xvclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable xvclk\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_bulk_enable(OG02B10_NUM_SUPPLIES, og02b10->supplies);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to enable regulators\n");
|
|
|
|
if (!IS_ERR(og02b10->pwdn_gpio)) {
|
|
ret = gpiod_direction_output(og02b10->pwdn_gpio, 1);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to set pwdn gpio\n");
|
|
usleep_range(3000, 5000);
|
|
}
|
|
|
|
if (!IS_ERR(og02b10->reset_gpio)) {
|
|
ret = gpiod_direction_output(og02b10->reset_gpio, 1);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to set reset gpio\n");
|
|
usleep_range(3000, 5000);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __og02b10_power_off(struct og02b10 *og02b10)
|
|
{
|
|
struct device *dev = &og02b10->client->dev;
|
|
int ret = 0;
|
|
|
|
if (!IS_ERR(og02b10->reset_gpio)) {
|
|
ret = gpiod_direction_output(og02b10->reset_gpio, 0);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to set reset gpio\n");
|
|
usleep_range(500, 1000);
|
|
}
|
|
if (!IS_ERR(og02b10->pwdn_gpio)) {
|
|
ret = gpiod_direction_output(og02b10->pwdn_gpio, 0);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to set pwdn gpio\n");
|
|
usleep_range(500, 1000);
|
|
}
|
|
clk_disable_unprepare(og02b10->xvclk);
|
|
regulator_bulk_disable(OG02B10_NUM_SUPPLIES, og02b10->supplies);
|
|
}
|
|
|
|
static int og02b10_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
return __og02b10_power_on(og02b10);
|
|
}
|
|
|
|
static int og02b10_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
__og02b10_power_off(og02b10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static int og02b10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->pad, 0);
|
|
const struct og02b10_mode *def_mode = &supported_modes[0];
|
|
|
|
mutex_lock(&og02b10->mutex);
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = def_mode->width;
|
|
try_fmt->height = def_mode->height;
|
|
try_fmt->code = def_mode->bus_fmt;
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
mutex_unlock(&og02b10->mutex);
|
|
/* No crop or compose */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int og02b10_enum_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
if (fie->index >= og02b10->cfg_num)
|
|
return -EINVAL;
|
|
|
|
fie->code = supported_modes[fie->index].bus_fmt;
|
|
fie->width = supported_modes[fie->index].width;
|
|
fie->height = supported_modes[fie->index].height;
|
|
fie->interval = supported_modes[fie->index].max_fps;
|
|
fie->reserved[0] = supported_modes[fie->index].hdr_mode;
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops og02b10_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(og02b10_runtime_suspend,
|
|
og02b10_runtime_resume, NULL)
|
|
};
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static const struct v4l2_subdev_internal_ops og02b10_internal_ops = {
|
|
.open = og02b10_open,
|
|
};
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops og02b10_core_ops = {
|
|
.s_power = og02b10_s_power,
|
|
.ioctl = og02b10_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl32 = og02b10_compat_ioctl32,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops og02b10_video_ops = {
|
|
.s_stream = og02b10_s_stream,
|
|
.g_frame_interval = og02b10_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops og02b10_pad_ops = {
|
|
.enum_mbus_code = og02b10_enum_mbus_code,
|
|
.enum_frame_size = og02b10_enum_frame_sizes,
|
|
.enum_frame_interval = og02b10_enum_frame_interval,
|
|
.get_fmt = og02b10_get_fmt,
|
|
.set_fmt = og02b10_set_fmt,
|
|
.get_mbus_config = og02b10_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops og02b10_subdev_ops = {
|
|
.core = &og02b10_core_ops,
|
|
.video = &og02b10_video_ops,
|
|
.pad = &og02b10_pad_ops,
|
|
};
|
|
|
|
static int og02b10_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct og02b10 *og02b10 = container_of(ctrl->handler,
|
|
struct og02b10, ctrl_handler);
|
|
struct i2c_client *client = og02b10->client;
|
|
int ret = 0;
|
|
u8 again = 0, dgain = 1;
|
|
u8 again_fin = 0, dgain_fin_l = 0, dgain_fin_h = 0;
|
|
u32 dgain_fin = 0;
|
|
|
|
u16 vts_val = 0;
|
|
s64 max;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VBLANK:
|
|
/* Update max exposure while meeting expected vblanking */
|
|
max = og02b10->cur_mode->height + ctrl->val - 12;
|
|
__v4l2_ctrl_modify_range(og02b10->exposure,
|
|
og02b10->exposure->minimum, max,
|
|
og02b10->exposure->step,
|
|
og02b10->exposure->default_value);
|
|
break;
|
|
}
|
|
|
|
dev_dbg(&client->dev, "set ctrl %#x\n", ctrl->id);
|
|
if (!pm_runtime_get_if_in_use(&client->dev)) {
|
|
dev_dbg(&client->dev, "powe is not on!!!!\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_START);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_EXP_H, (ctrl->val >> 8) & 0xFF);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_EXP_L, ctrl->val & 0xFF);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_END);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP_LAUNCH);
|
|
dev_dbg(&client->dev, "set exposure %#x(%d)\n", ctrl->val, ctrl->val);
|
|
break;
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
/* val = again * dgain
|
|
* again = 1 ~ 15.5
|
|
* dgain = 1 ~ 3.98
|
|
*
|
|
* val = rounddown(again * dgain * 16 + 0.5)
|
|
*
|
|
* val:
|
|
* 1 ~ 248 again: val / 16
|
|
* dgain: 1
|
|
* 248 ~ 988 again: 15.5
|
|
* dgain: val / 248
|
|
*
|
|
* again_value again_fine_step_value
|
|
* 1.0000 ~ 1.9375 1/16
|
|
* 2.000 ~ 3.875 1/8
|
|
* 4.00 ~ 7.75 1/4
|
|
* 8.0 ~ 15.5 1/2
|
|
*
|
|
* dgain_value dgain_fine_step_value
|
|
* 1 ~ 3.98 1/1024
|
|
*/
|
|
if (ctrl->val > 248) {
|
|
again = 15;
|
|
again_fin = 1;
|
|
|
|
dgain = ctrl->val / 248;
|
|
dgain_fin = ((ctrl->val - dgain * 248) << 10) / 248;
|
|
dgain_fin_h = (dgain_fin >> 2) & 0xff;
|
|
dgain_fin_l = dgain_fin & 0x3;
|
|
} else {
|
|
again = ctrl->val >> 4;
|
|
if (again == 1)
|
|
again_fin = ctrl->val & 0xf;
|
|
else if (again >= 2 && again < 4)
|
|
again_fin = (ctrl->val & 0xf) >> 1;
|
|
else if (again >= 4 && again < 8)
|
|
again_fin = (ctrl->val & 0xf) >> 2;
|
|
else if (again >= 8)
|
|
again_fin = (ctrl->val & 0xf) >> 3;
|
|
|
|
dgain = 1;
|
|
dgain_fin_l = 0;
|
|
dgain_fin_h = 0;
|
|
}
|
|
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_START);
|
|
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_AGAIN_COARSE, again);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_AGAIN_FINE, (again_fin << 4));
|
|
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_DGAIN_COARSE, dgain);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_DGAIN_FINE_H, dgain_fin_h);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_DGAIN_FINE_L, dgain_fin_l);
|
|
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_END);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP_LAUNCH);
|
|
|
|
dev_dbg(&client->dev,
|
|
"set gain %#x, again = %#x(%u), again fine = %#x(%u), dgain = %#x(%u), dgain fine = %#x(%u)\n",
|
|
ctrl->val, again, again, again_fin, again_fin,
|
|
dgain, dgain, dgain_fin, dgain_fin);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
vts_val = og02b10->cur_mode->height + ctrl->val;
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_START);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_VTS_H, (vts_val >> 8) & 0xFF);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_VTS_L, vts_val & 0xFF);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_END);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP_LAUNCH);
|
|
dev_dbg(&client->dev, "set vblank %#x\n", vts_val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
if (ctrl->val)
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_TEST_PATTERN,
|
|
OG02B10_TEST_PATTERN_ENABLE_VAL);
|
|
else
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_TEST_PATTERN,
|
|
OG02B10_TEST_PATTERN_DISABLE_VAL);
|
|
dev_dbg(&client->dev, "set test pattern %#x\n", ctrl->val);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
if (ctrl->val) {
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_MIRROR, OG02B10_MIRROR_ENABLE_VAL);
|
|
} else {
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_MIRROR, OG02B10_MIRROR_DISABLE_VAL);
|
|
}
|
|
dev_dbg(&client->dev, "set mirror %#x\n", ctrl->val);
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
if (ctrl->val) {
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_FILP, OG02B10_FILP_ENABLE_VAL);
|
|
} else {
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_FILP, OG02B10_FILP_DISABLE_VAL);
|
|
}
|
|
dev_dbg(&client->dev, "set flip %#x\n", ctrl->val);
|
|
break;
|
|
case V4L2_CID_OG_LOW_POWER_MODE:
|
|
/* slave mode
|
|
* C0 3006 00 02 ;disable FSIN output, bit operation, set 0x3006[1]=0
|
|
* C0 303F 01 ;r_frame_on_num. (active frames after wake-up)
|
|
* C0 31FF 00 ;Change to Clockless SCCB
|
|
* C0 0100 00
|
|
* ;FSIN trigger wake => active certain frames => sleep
|
|
* C0 3030 10
|
|
* C0 3030 84
|
|
*/
|
|
ret = og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD,
|
|
OG02B10_GROUP0_HOLD_START);
|
|
|
|
if (ctrl->val == EXTERNAL_TRIGGER_MODE) {
|
|
if (!og02b10->slave_mode) {
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_IO_PAD_OUT_EN,
|
|
OG02B10_IO_PAD_OUT_EN_DEFAULT &
|
|
(~OG02B10_FSIN_OUTPUT_ENABLE));
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_R_FRAME_ON_NUM, 0x1);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_SCCB_SEL,
|
|
OG02B10_CLOCKLESS_SCCB);
|
|
|
|
if (og02b10->streaming) {
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_CTRL_MODE,
|
|
OG02B10_MODE_SW_STANDBY);
|
|
}
|
|
|
|
// FSIN trigger wake => active certain frames => sleep
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_LOW_POWER_MODE_CTRL,
|
|
OG02B10_LOW_FRAME_RATE_VAL);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_LOW_POWER_MODE_CTRL,
|
|
OG02B10_EXTERNAL_TRIGGER_VAL | 0x80);
|
|
if (ret == 0)
|
|
og02b10->slave_mode = true;
|
|
}
|
|
} else if (ctrl->val == LOW_POWER_MODE_DISABLE) {
|
|
if (og02b10->slave_mode) {
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_IO_PAD_OUT_EN,
|
|
OG02B10_IO_PAD_OUT_EN_DEFAULT);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_R_FRAME_ON_NUM, 0x3);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_SCCB_SEL, 0x1);
|
|
if (ret == 0)
|
|
og02b10->slave_mode = false;
|
|
}
|
|
} else {
|
|
dev_warn(&client->dev, "Not support low power mode %#x\n", ctrl->val);
|
|
}
|
|
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP0_HOLD_END);
|
|
ret |= og02b10_write_reg(og02b10->client,
|
|
OG02B10_REG_GROUP_HOLD, OG02B10_GROUP_LAUNCH);
|
|
|
|
dev_dbg(&client->dev, "set low power mode %#x\n", ctrl->val);
|
|
break;
|
|
default:
|
|
dev_warn(&client->dev, "%s Unhandled id: %#x, val :%#x\n",
|
|
__func__, ctrl->id, ctrl->val);
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops og02b10_ctrl_ops = {
|
|
.s_ctrl = og02b10_set_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config og02b10_test_pattern_ctrl_cfg = {
|
|
.ops = &og02b10_ctrl_ops,
|
|
.id = V4L2_CID_TEST_PATTERN,
|
|
.name = "Test Pattern",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = 0x0,
|
|
.max = 0x1,
|
|
.step = 0x1,
|
|
.def = 0x0,
|
|
};
|
|
|
|
static const struct v4l2_ctrl_config og02b10_low_power_mode_ctrl_cfg = {
|
|
.ops = &og02b10_ctrl_ops,
|
|
.id = V4L2_CID_OG_LOW_POWER_MODE,
|
|
.name = "low power mode",
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.min = LOW_POWER_MODE_DISABLE,
|
|
.max = LOW_POWER_MODE_MAX - 1,
|
|
.step = 0x1,
|
|
.def = LOW_POWER_MODE_DISABLE,
|
|
};
|
|
|
|
static int og02b10_initialize_controls(struct og02b10 *og02b10)
|
|
{
|
|
const struct og02b10_mode *mode;
|
|
struct v4l2_ctrl_handler *handler;
|
|
s64 exposure_max, vblank_def;
|
|
u32 h_blank;
|
|
int ret;
|
|
u64 dst_link_freq = 0;
|
|
u64 dst_pixel_rate = 0;
|
|
|
|
handler = &og02b10->ctrl_handler;
|
|
mode = og02b10->cur_mode;
|
|
ret = v4l2_ctrl_handler_init(handler, 10);
|
|
if (ret)
|
|
return ret;
|
|
handler->lock = &og02b10->mutex;
|
|
|
|
og02b10->link_freq = v4l2_ctrl_new_int_menu(handler, NULL,
|
|
V4L2_CID_LINK_FREQ,
|
|
1, 0, link_freq_menu_items);
|
|
|
|
if (og02b10->cur_mode->bus_fmt == MEDIA_BUS_FMT_SBGGR10_1X10) {
|
|
dst_link_freq = 0;
|
|
dst_pixel_rate = PIXEL_RATE_WITH_400M;
|
|
}
|
|
/* pixel rate = link frequency * 2 * lanes / BITS_PER_SAMPLE */
|
|
og02b10->pixel_rate = v4l2_ctrl_new_std(handler, NULL,
|
|
V4L2_CID_PIXEL_RATE,
|
|
0, PIXEL_RATE_WITH_400M,
|
|
1, dst_pixel_rate);
|
|
|
|
__v4l2_ctrl_s_ctrl(og02b10->link_freq,
|
|
dst_link_freq);
|
|
|
|
h_blank = mode->hts_def;
|
|
og02b10->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
|
|
h_blank, h_blank, 1, h_blank);
|
|
if (og02b10->hblank)
|
|
og02b10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
vblank_def = mode->vts_def - mode->height;
|
|
og02b10->vblank = v4l2_ctrl_new_std(handler, &og02b10_ctrl_ops,
|
|
V4L2_CID_VBLANK, vblank_def,
|
|
OG02B10_VTS_MAX - mode->height, 1, vblank_def);
|
|
|
|
exposure_max = mode->vts_def - 12;
|
|
og02b10->exposure = v4l2_ctrl_new_std(handler, &og02b10_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, OG02B10_EXPOSURE_MIN,
|
|
exposure_max, OG02B10_EXPOSURE_STEP,
|
|
mode->exp_def);
|
|
|
|
og02b10->anal_gain = v4l2_ctrl_new_std(handler, &og02b10_ctrl_ops,
|
|
V4L2_CID_ANALOGUE_GAIN, OG02B10_GAIN_MIN,
|
|
OG02B10_GAIN_MAX, OG02B10_GAIN_STEP,
|
|
OG02B10_GAIN_DEFAULT);
|
|
|
|
og02b10->h_flip = v4l2_ctrl_new_std(handler, &og02b10_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
|
|
og02b10->v_flip = v4l2_ctrl_new_std(handler, &og02b10_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
|
|
og02b10->test_pattern = v4l2_ctrl_new_custom(handler, &og02b10_test_pattern_ctrl_cfg, NULL);
|
|
|
|
og02b10->low_power_mode = v4l2_ctrl_new_custom(handler, &og02b10_low_power_mode_ctrl_cfg, NULL);
|
|
if (handler->error) {
|
|
ret = handler->error;
|
|
dev_err(&og02b10->client->dev,
|
|
"Failed to init controls(%d)\n", ret);
|
|
goto err_free_handler;
|
|
}
|
|
|
|
og02b10->subdev.ctrl_handler = handler;
|
|
og02b10->has_init_exp = false;
|
|
og02b10->slave_mode = false;
|
|
|
|
return 0;
|
|
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(handler);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og02b10_check_sensor_id(struct og02b10 *og02b10,
|
|
struct i2c_client *client)
|
|
{
|
|
struct device *dev = &og02b10->client->dev;
|
|
u8 id0 = 0, id1 = 0, id2 = 0;
|
|
int ret;
|
|
|
|
ret = og02b10_read_reg(client, OG02B10_REG_SC_SCCB_ID0, &id0);
|
|
if (id0 != OG02B10_CHIP_ID0) {
|
|
dev_err(dev, "Unexpected sensor SCCB ID: id0(%06x), ret(%d)\n", id0, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = og02b10_read_reg(client, OG02B10_REG_SC_SCCB_ID1, &id1);
|
|
if (id1 != OG02B10_CHIP_ID1) {
|
|
dev_err(dev, "Unexpected sensor SCCB ID: id1(%06x), ret(%d)\n", id0, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = og02b10_read_reg(client, OG02B10_REG_SC_SCCB_ID2, &id2);
|
|
if (id2 != OG02B10_CHIP_ID2) {
|
|
dev_err(dev, "Unexpected sensor SCCB ID: id2(%06x), ret(%d)\n", id0, ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(dev,
|
|
"Detected OG02B10 sensor success, id0(%06x), id1(%06x), id2(%06x).\n",
|
|
id0, id1, id2);
|
|
return 0;
|
|
}
|
|
|
|
static int og02b10_configure_regulators(struct og02b10 *og02b10)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < OG02B10_NUM_SUPPLIES; i++)
|
|
og02b10->supplies[i].supply = OG02B10_supply_names[i];
|
|
|
|
return devm_regulator_bulk_get(&og02b10->client->dev,
|
|
OG02B10_NUM_SUPPLIES,
|
|
og02b10->supplies);
|
|
}
|
|
|
|
static int og02b10_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct og02b10 *og02b10;
|
|
struct v4l2_subdev *sd;
|
|
char facing[2];
|
|
int ret;
|
|
u32 i, hdr_mode = 0;
|
|
|
|
dev_info(dev, "driver version: %02x.%02x.%02x",
|
|
DRIVER_VERSION >> 16,
|
|
(DRIVER_VERSION & 0xff00) >> 8,
|
|
DRIVER_VERSION & 0x00ff);
|
|
|
|
og02b10 = devm_kzalloc(dev, sizeof(*og02b10), GFP_KERNEL);
|
|
if (!og02b10)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
|
|
&og02b10->module_index);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
|
|
&og02b10->module_facing);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
|
|
&og02b10->module_name);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
|
|
&og02b10->len_name);
|
|
if (ret) {
|
|
dev_err(dev, "could not get module information!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = of_property_read_u32(node, OF_CAMERA_HDR_MODE,
|
|
&hdr_mode);
|
|
if (ret) {
|
|
hdr_mode = NO_HDR;
|
|
dev_warn(dev, " Get hdr mode failed! no hdr default\n");
|
|
}
|
|
|
|
og02b10->cfg_num = ARRAY_SIZE(supported_modes);
|
|
for (i = 0; i < og02b10->cfg_num; i++) {
|
|
if (hdr_mode == supported_modes[i].hdr_mode) {
|
|
og02b10->cur_mode = &supported_modes[i];
|
|
break;
|
|
}
|
|
}
|
|
og02b10->client = client;
|
|
og02b10->xvclk = devm_clk_get(dev, "xvclk");
|
|
if (IS_ERR(og02b10->xvclk)) {
|
|
dev_err(dev, "Failed to get xvclk\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
og02b10->pinctrl = devm_pinctrl_get(dev);
|
|
if (!IS_ERR(og02b10->pinctrl)) {
|
|
og02b10->pins_default = pinctrl_lookup_state(og02b10->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_DEFAULT);
|
|
if (IS_ERR(og02b10->pins_default)) {
|
|
dev_err(dev, "could not get default pinstate\n");
|
|
} else {
|
|
ret = pinctrl_select_state(og02b10->pinctrl, og02b10->pins_default);
|
|
if (ret < 0)
|
|
dev_err(dev, "could not set default pins\n");
|
|
}
|
|
|
|
og02b10->pins_mclk = pinctrl_lookup_state(og02b10->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_MCLK);
|
|
if (IS_ERR(og02b10->pins_mclk)) {
|
|
dev_err(dev, "could not get mclk pinstate\n");
|
|
} else {
|
|
if (!IS_ERR_OR_NULL(og02b10->pins_mclk)) {
|
|
ret = pinctrl_select_state(og02b10->pinctrl, og02b10->pins_mclk);
|
|
if (ret < 0)
|
|
dev_err(dev, "could not set mclk pins\n");
|
|
}
|
|
}
|
|
} else {
|
|
dev_err(dev, "no pinctrl\n");
|
|
}
|
|
|
|
og02b10->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(og02b10->reset_gpio))
|
|
dev_warn(dev, "Failed to get reset-gpios\n");
|
|
|
|
og02b10->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_OUT_LOW);
|
|
if (IS_ERR(og02b10->pwdn_gpio))
|
|
dev_warn(dev, "Failed to get pwdn-gpios\n");
|
|
|
|
ret = og02b10_configure_regulators(og02b10);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get power regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
og02b10->slave_mode = false;
|
|
mutex_init(&og02b10->mutex);
|
|
|
|
sd = &og02b10->subdev;
|
|
v4l2_i2c_subdev_init(sd, client, &og02b10_subdev_ops);
|
|
ret = og02b10_initialize_controls(og02b10);
|
|
if (ret)
|
|
goto err_destroy_mutex;
|
|
|
|
ret = __og02b10_power_on(og02b10);
|
|
if (ret)
|
|
goto err_free_handler;
|
|
|
|
ret = og02b10_check_sensor_id(og02b10, client);
|
|
if (ret)
|
|
goto err_power_off;
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
sd->internal_ops = &og02b10_internal_ops;
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
#endif
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
og02b10->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ret = media_entity_pads_init(&sd->entity, 1, &og02b10->pad);
|
|
if (ret < 0) {
|
|
dev_err(dev, "media entity pads init failed.\n");
|
|
goto err_power_off;
|
|
}
|
|
#endif
|
|
|
|
memset(facing, 0, sizeof(facing));
|
|
if (strcmp(og02b10->module_facing, "back") == 0)
|
|
facing[0] = 'b';
|
|
else
|
|
facing[0] = 'f';
|
|
|
|
snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
|
|
og02b10->module_index, facing,
|
|
OG02B10_NAME, dev_name(sd->dev));
|
|
ret = v4l2_async_register_subdev_sensor_common(sd);
|
|
if (ret) {
|
|
dev_err(dev, "v4l2 async register subdev failed\n");
|
|
goto err_clean_entity;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_idle(dev);
|
|
|
|
dev_info(dev, "probe success\n");
|
|
return 0;
|
|
|
|
err_clean_entity:
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
err_power_off:
|
|
__og02b10_power_off(og02b10);
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(&og02b10->ctrl_handler);
|
|
err_destroy_mutex:
|
|
mutex_destroy(&og02b10->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int og02b10_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct og02b10 *og02b10 = to_og02b10(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
v4l2_ctrl_handler_free(&og02b10->ctrl_handler);
|
|
mutex_destroy(&og02b10->mutex);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
__og02b10_power_off(og02b10);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id og02b10_of_match[] = {
|
|
{ .compatible = "ovti,og02b10" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, og02b10_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id og02b10_match_id[] = {
|
|
{ "ovti,og02b10", 0 },
|
|
{ },
|
|
};
|
|
|
|
static struct i2c_driver og02b10_i2c_driver = {
|
|
.driver = {
|
|
.name = OG02B10_NAME,
|
|
.pm = &og02b10_pm_ops,
|
|
.of_match_table = of_match_ptr(og02b10_of_match),
|
|
},
|
|
.probe = &og02b10_probe,
|
|
.remove = &og02b10_remove,
|
|
.id_table = og02b10_match_id,
|
|
};
|
|
|
|
#ifdef CONFIG_ROCKCHIP_THUNDER_BOOT
|
|
module_i2c_driver(og02b10_i2c_driver);
|
|
#else
|
|
static int __init sensor_mod_init(void)
|
|
{
|
|
return i2c_add_driver(&og02b10_i2c_driver);
|
|
}
|
|
|
|
static void __exit sensor_mod_exit(void)
|
|
{
|
|
i2c_del_driver(&og02b10_i2c_driver);
|
|
}
|
|
|
|
device_initcall_sync(sensor_mod_init);
|
|
module_exit(sensor_mod_exit);
|
|
#endif
|
|
|
|
MODULE_DESCRIPTION("OmniVision og02b10 sensor driver");
|
|
MODULE_LICENSE("GPL");
|