2068 lines
47 KiB
C
2068 lines
47 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* gc3003 driver
|
|
*
|
|
* Copyright (C) 2022 Rockchip Electronics Co., Ltd.
|
|
*
|
|
* V0.0X01.0X01 first version
|
|
*/
|
|
|
|
//#define DEBUG
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/version.h>
|
|
#include <linux/rk-camera-module.h>
|
|
#include <linux/rk-preisp.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-async.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-subdev.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include "../platform/rockchip/isp/rkisp_tb_helper.h"
|
|
|
|
#define DRIVER_VERSION KERNEL_VERSION(0, 0x01, 0x07)
|
|
|
|
#ifndef V4L2_CID_DIGITAL_GAIN
|
|
#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN
|
|
#endif
|
|
|
|
#define GC3003_LANES 2
|
|
#define GC3003_BITS_PER_SAMPLE 10
|
|
#define GC3003_LINK_FREQ_LINEAR 315000000
|
|
|
|
#define GC3003_PIXEL_RATE_LINEAR (GC3003_LINK_FREQ_LINEAR * 2 * \
|
|
GC3003_LANES / GC3003_BITS_PER_SAMPLE)
|
|
#define GC3003_XVCLK_FREQ 27000000
|
|
|
|
#define CHIP_ID 0x3003
|
|
#define GC3003_REG_CHIP_ID_H 0x03f0
|
|
#define GC3003_REG_CHIP_ID_L 0x03f1
|
|
|
|
#define GC3003_REG_CTRL_MODE 0x023e
|
|
#define GC3003_MODE_SW_STANDBY 0x00
|
|
#define GC3003_MODE_STREAMING 0x99
|
|
|
|
#define GC3003_REG_EXPOSURE_H 0x0d03
|
|
#define GC3003_REG_EXPOSURE_L 0x0d04
|
|
#define GC3003_EXPOSURE_MIN 4
|
|
#define GC3003_EXPOSURE_STEP 1
|
|
#define GC3003_VTS_MAX 0x7fff
|
|
|
|
#define GC3003_GAIN_MIN 64
|
|
#define GC3003_GAIN_MAX 0xffff
|
|
#define GC3003_GAIN_STEP 1
|
|
#define GC3003_GAIN_DEFAULT 64
|
|
|
|
#define GC3003_REG_TEST_PATTERN 0x018c
|
|
#define GC3003_TEST_PATTERN_ENABLE 0x17
|
|
#define GC3003_TEST_PATTERN_DISABLE 0x0
|
|
|
|
#define GC3003_REG_VTS_H 0x0d41 //0x0d0d
|
|
#define GC3003_REG_VTS_L 0x0d42 //0x0d0e act w: d05 d06
|
|
|
|
#define GC3003_FLIP_MIRROR_REG 0x0015
|
|
#define GC3003_FLIP_MIRROR_REG_1 0x0d15
|
|
#define GC3003_MIRROR_BIT_MASK BIT(0)
|
|
#define GC3003_FLIP_BIT_MASK BIT(3)
|
|
|
|
#define REG_NULL 0xFFFF
|
|
|
|
#define GC3003_REG_VALUE_08BIT 1
|
|
#define GC3003_REG_VALUE_16BIT 2
|
|
#define GC3003_REG_VALUE_24BIT 3
|
|
|
|
#define OF_CAMERA_PINCTRL_STATE_DEFAULT "rockchip,camera_default"
|
|
#define OF_CAMERA_PINCTRL_STATE_SLEEP "rockchip,camera_sleep"
|
|
#define OF_CAMERA_HDR_MODE "rockchip,camera-hdr-mode"
|
|
#define GC3003_NAME "gc3003"
|
|
|
|
static const char * const gc3003_supply_names[] = {
|
|
"dovdd", /* Digital I/O power */
|
|
"dvdd", /* Digital core power */
|
|
"avdd", /* Analog power */
|
|
};
|
|
|
|
#define GC3003_NUM_SUPPLIES ARRAY_SIZE(gc3003_supply_names)
|
|
|
|
struct regval {
|
|
u16 addr;
|
|
u8 val;
|
|
};
|
|
|
|
struct gc3003_mode {
|
|
u32 bus_fmt;
|
|
u32 width;
|
|
u32 height;
|
|
struct v4l2_fract max_fps;
|
|
u32 hts_def;
|
|
u32 vts_def;
|
|
u32 exp_def;
|
|
const struct regval *reg_list;
|
|
const struct regval *stream_on_reg_list;
|
|
const struct regval *stand_by_reg_list;
|
|
u32 hdr_mode;
|
|
u32 vc[PAD_MAX];
|
|
};
|
|
|
|
struct gc3003 {
|
|
struct i2c_client *client;
|
|
struct clk *xvclk;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *pwdn_gpio;
|
|
struct gpio_desc *pwren_gpio;
|
|
struct regulator_bulk_data supplies[GC3003_NUM_SUPPLIES];
|
|
|
|
struct pinctrl *pinctrl;
|
|
struct pinctrl_state *pins_default;
|
|
struct pinctrl_state *pins_sleep;
|
|
|
|
struct v4l2_subdev subdev;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *anal_gain;
|
|
struct v4l2_ctrl *digi_gain;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *h_flip;
|
|
struct v4l2_ctrl *v_flip;
|
|
struct v4l2_ctrl *test_pattern;
|
|
struct mutex mutex;
|
|
bool streaming;
|
|
bool power_on;
|
|
const struct gc3003_mode *cur_mode;
|
|
u32 cfg_num;
|
|
u32 module_index;
|
|
u32 cur_vts;
|
|
u32 cur_pixel_rate;
|
|
u32 cur_link_freq;
|
|
struct preisp_hdrae_exp_s init_hdrae_exp;
|
|
const char *module_facing;
|
|
const char *module_name;
|
|
const char *len_name;
|
|
bool has_init_exp;
|
|
bool is_thunderboot;
|
|
bool is_first_streamoff;
|
|
};
|
|
|
|
#define to_gc3003(sd) container_of(sd, struct gc3003, subdev)
|
|
|
|
/*
|
|
* Xclk 24Mhz
|
|
*/
|
|
static const struct regval gc3003_global_regs[] = {
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const u32 reg_val_table_liner[25][6] = {
|
|
{0x00, 0x00, 0x05, 0x01, 0x01, 0x00},
|
|
{0x0a, 0x00, 0x06, 0x01, 0x01, 0x0c},
|
|
{0x00, 0x01, 0x06, 0x01, 0x01, 0x1a},
|
|
{0x0a, 0x01, 0x08, 0x01, 0x01, 0x2a},
|
|
{0x20, 0x00, 0x0a, 0x02, 0x02, 0x00},
|
|
{0x25, 0x00, 0x0a, 0x03, 0x02, 0x18},
|
|
{0x20, 0x01, 0x0a, 0x04, 0x02, 0x33},
|
|
{0x25, 0x01, 0x0b, 0x05, 0x03, 0x14},
|
|
{0x30, 0x00, 0x0b, 0x06, 0x04, 0x00},
|
|
{0x32, 0x80, 0x0c, 0x09, 0x04, 0x2f},
|
|
{0x30, 0x01, 0x0c, 0x0c, 0x05, 0x26},
|
|
{0x32, 0x81, 0x0d, 0x0e, 0x06, 0x29},
|
|
{0x38, 0x00, 0x0e, 0x10, 0x08, 0x00},
|
|
{0x39, 0x40, 0x10, 0x12, 0x09, 0x1f},
|
|
{0x38, 0x01, 0x12, 0x12, 0x0b, 0x0d},
|
|
{0x39, 0x41, 0x14, 0x14, 0x0d, 0x12},
|
|
{0x30, 0x08, 0x15, 0x16, 0x10, 0x00},
|
|
{0x32, 0x88, 0x18, 0x1a, 0x12, 0x3e},
|
|
{0x30, 0x09, 0x1a, 0x1d, 0x16, 0x1a},
|
|
{0x32, 0x89, 0x1c, 0x22, 0x1a, 0x23},
|
|
{0x38, 0x08, 0x1e, 0x26, 0x20, 0x00},
|
|
{0x39, 0x48, 0x20, 0x2d, 0x25, 0x3b},
|
|
{0x38, 0x09, 0x22, 0x32, 0x2c, 0x33},
|
|
{0x39, 0x49, 0x24, 0x3a, 0x35, 0x06},
|
|
{0x38, 0x0a, 0x26, 0x42, 0x3f, 0x3f},
|
|
};
|
|
|
|
static const u32 gain_level_table[26] = {
|
|
64,
|
|
76,
|
|
90,
|
|
106,
|
|
128,
|
|
152,
|
|
179,
|
|
212,
|
|
256,
|
|
303,
|
|
358,
|
|
425,
|
|
512,
|
|
607,
|
|
716,
|
|
848,
|
|
1024,
|
|
1214,
|
|
1434,
|
|
1699,
|
|
2048,
|
|
2427,
|
|
2865,
|
|
3393,
|
|
4096,
|
|
0xffffffff,
|
|
};
|
|
|
|
/*
|
|
* Xclk 27Mhz
|
|
* max_framerate 30fps
|
|
* mipi_datarate per lane 630Mbps, 2lane
|
|
*/
|
|
static const struct regval gc3003_linear_10_2304x1298_regs[] = {
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0x00},
|
|
{0x03f3, 0x00},
|
|
{0x03f5, 0xc0},
|
|
{0x03f6, 0x06},
|
|
{0x03f7, 0x01},
|
|
{0x03f8, 0x46},
|
|
{0x03f9, 0x13},
|
|
{0x03fa, 0x00},
|
|
{0x03e0, 0x16},
|
|
{0x03e1, 0x0d},
|
|
{0x03e2, 0x30},
|
|
{0x03e4, 0x08},
|
|
{0x03fc, 0xce},
|
|
{0x0d05, 0x05},
|
|
{0x0d06, 0x40},
|
|
{0x0d76, 0x00},
|
|
{0x0d41, 0x05},
|
|
{0x0d42, 0x3c},
|
|
{0x0d0a, 0x02},
|
|
{0x000c, 0x02},
|
|
{0x0d0d, 0x05},
|
|
{0x0d0e, 0x18},
|
|
{0x000f, 0x09},
|
|
{0x0010, 0x08},
|
|
{0x0017, 0x0c},
|
|
{0x0d53, 0x12},
|
|
{0x0051, 0x03},
|
|
{0x0082, 0x01},
|
|
{0x008c, 0x05},
|
|
{0x008d, 0xd0},
|
|
{0x0db7, 0x01},
|
|
{0x0db0, 0xad},
|
|
{0x0db1, 0x00},
|
|
{0x0db2, 0x8c},
|
|
{0x0db3, 0xf4},
|
|
{0x0db4, 0x00},
|
|
{0x0db5, 0x97},
|
|
{0x0db6, 0x08},
|
|
{0x0d25, 0xcb},
|
|
{0x0d4a, 0x04},
|
|
{0x00d2, 0x70},
|
|
{0x00d7, 0x19},
|
|
{0x00d9, 0x1c},
|
|
{0x00da, 0xc1},
|
|
{0x0d55, 0x1b},
|
|
{0x0d92, 0x17},
|
|
{0x0dc2, 0x30},
|
|
{0x0d2a, 0x30},
|
|
{0x0d19, 0x51},
|
|
{0x0d29, 0x30},
|
|
{0x0d20, 0x30},
|
|
{0x0d72, 0x12},
|
|
{0x0d4e, 0x12},
|
|
{0x0d43, 0x20},
|
|
{0x0050, 0x0c},
|
|
{0x006e, 0x03},
|
|
{0x0153, 0x50},
|
|
{0x0192, 0x04},
|
|
{0x0194, 0x04},
|
|
{0x0195, 0x05},
|
|
{0x0196, 0x10},
|
|
{0x0197, 0x09},
|
|
{0x0198, 0x00},
|
|
{0x0077, 0x01},
|
|
{0x0078, 0x04},
|
|
{0x0079, 0x65},
|
|
{0x0067, 0xc0},
|
|
{0x0054, 0xff},
|
|
{0x0055, 0x02},
|
|
{0x0056, 0x00},
|
|
{0x0057, 0x04},
|
|
{0x005a, 0xff},
|
|
{0x005b, 0x07},
|
|
{0x00d5, 0x03},
|
|
{0x0102, 0x10},
|
|
{0x0d4a, 0x04},
|
|
{0x04e0, 0xff},
|
|
{0x031e, 0x3e},
|
|
{0x0159, 0x01},
|
|
{0x014f, 0x28},
|
|
{0x0150, 0x40},
|
|
{0x0026, 0x00},
|
|
{0x0d26, 0xa0},
|
|
{0x0414, 0x76},
|
|
{0x0415, 0x75},
|
|
{0x0416, 0x75},
|
|
{0x0417, 0x76},
|
|
{0x0155, 0x01},
|
|
{0x0170, 0x3f},
|
|
{0x0171, 0x3f},
|
|
{0x0172, 0x3f},
|
|
{0x0173, 0x3f},
|
|
{0x0428, 0x0b},
|
|
{0x0429, 0x0b},
|
|
{0x042a, 0x0b},
|
|
{0x042b, 0x0b},
|
|
{0x042c, 0x0b},
|
|
{0x042d, 0x0b},
|
|
{0x042e, 0x0b},
|
|
{0x042f, 0x0b},
|
|
{0x0430, 0x05},
|
|
{0x0431, 0x05},
|
|
{0x0432, 0x05},
|
|
{0x0433, 0x05},
|
|
{0x0434, 0x04},
|
|
{0x0435, 0x04},
|
|
{0x0436, 0x04},
|
|
{0x0437, 0x04},
|
|
{0x0438, 0x18},
|
|
{0x0439, 0x18},
|
|
{0x043a, 0x18},
|
|
{0x043b, 0x18},
|
|
{0x043c, 0x1d},
|
|
{0x043d, 0x20},
|
|
{0x043e, 0x22},
|
|
{0x043f, 0x24},
|
|
{0x0468, 0x04},
|
|
{0x0469, 0x04},
|
|
{0x046a, 0x04},
|
|
{0x046b, 0x04},
|
|
{0x046c, 0x04},
|
|
{0x046d, 0x04},
|
|
{0x046e, 0x04},
|
|
{0x046f, 0x04},
|
|
{0x0108, 0xf0},
|
|
{0x0109, 0x80},
|
|
{0x0d03, 0x05},
|
|
{0x0d04, 0x00},
|
|
{0x007a, 0x60},
|
|
{0x00d0, 0x00},
|
|
{0x0080, 0x05},
|
|
{0x0291, 0x0f},
|
|
{0x0292, 0xff},
|
|
{0x0201, 0x27},
|
|
{0x0202, 0x53},
|
|
{0x0203, 0x4e},
|
|
{0x0206, 0x03},
|
|
{0x0212, 0x0b},
|
|
{0x0213, 0x40},
|
|
{0x0215, 0x12},
|
|
{0x023e, 0x99},
|
|
{0x03fe, 0x10},
|
|
{0x0183, 0x09},
|
|
{0x0187, 0x51},
|
|
{0x0d22, 0x04},
|
|
{0x0d21, 0x3C},
|
|
{0x0d03, 0x01},
|
|
{0x0d04, 0x28},
|
|
{0x0d23, 0x0e},
|
|
{0x03fe, 0x00},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct regval gc3003_linear_10_320x240_regs[] = {
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0x00},
|
|
{0x03f3, 0x00},
|
|
{0x03f5, 0xc0},
|
|
{0x03f6, 0x06},
|
|
{0x03f7, 0x01},
|
|
{0x03f8, 0x46},
|
|
{0x03f9, 0x13},
|
|
{0x03fa, 0x00},
|
|
{0x03e0, 0x16},
|
|
{0x03e1, 0x0d},
|
|
{0x03e2, 0x30},
|
|
{0x03e4, 0x08},
|
|
{0x03fc, 0xce},
|
|
{0x0d05, 0x05},
|
|
{0x0d06, 0xdc},
|
|
{0x0d76, 0x00},
|
|
{0x0d41, 0x01},
|
|
{0x0d42, 0x2c},
|
|
{0x0d0a, 0x02},
|
|
{0x000c, 0x02},
|
|
{0x0d0d, 0x00},
|
|
{0x0d0e, 0xf8},
|
|
{0x000f, 0x01},
|
|
{0x0010, 0x48},
|
|
{0x0017, 0x0c},
|
|
{0x0d53, 0x12},
|
|
{0x0051, 0x03},
|
|
{0x0082, 0x01},
|
|
{0x0086, 0x20},
|
|
{0x008a, 0x01},
|
|
{0x008b, 0x1d},
|
|
{0x008c, 0x05},
|
|
{0x008d, 0xd0},
|
|
{0x0db7, 0x01},
|
|
{0x0db0, 0x05},
|
|
{0x0db1, 0x00},
|
|
{0x0db2, 0x04},
|
|
{0x0db3, 0x54},
|
|
{0x0db4, 0x00},
|
|
{0x0db5, 0x17},
|
|
{0x0db6, 0x08},
|
|
{0x0d25, 0xcb},
|
|
{0x0d4a, 0x04},
|
|
{0x00d2, 0x70},
|
|
{0x00d7, 0x19},
|
|
{0x00d9, 0x10},
|
|
{0x00da, 0xc1},
|
|
{0x0d55, 0x1b},
|
|
{0x0d92, 0x17},
|
|
{0x0dc2, 0x30},
|
|
{0x0d2a, 0x30},
|
|
{0x0d19, 0x51},
|
|
{0x0d29, 0x30},
|
|
{0x0d20, 0x30},
|
|
{0x0d72, 0x12},
|
|
{0x0d4e, 0x12},
|
|
{0x0d43, 0x20},
|
|
{0x0050, 0x0c},
|
|
{0x006e, 0x03},
|
|
{0x0153, 0x50},
|
|
{0x0192, 0x04},
|
|
{0x0194, 0x04},
|
|
{0x0195, 0x00},
|
|
{0x0196, 0xf0},
|
|
{0x0197, 0x01},
|
|
{0x0198, 0x40},
|
|
{0x0077, 0x01},
|
|
{0x0078, 0x65},
|
|
{0x0079, 0x04},
|
|
{0x0067, 0xc0},
|
|
{0x0054, 0xff},
|
|
{0x0055, 0x02},
|
|
{0x0056, 0x00},
|
|
{0x0057, 0x04},
|
|
{0x005a, 0xff},
|
|
{0x005b, 0x07},
|
|
{0x00d5, 0x03},
|
|
{0x0102, 0x10},
|
|
{0x0d4a, 0x04},
|
|
{0x04e0, 0xff},
|
|
{0x031e, 0x3e},
|
|
{0x0159, 0x01},
|
|
{0x014f, 0x28},
|
|
{0x0150, 0x40},
|
|
{0x0026, 0x00},
|
|
{0x0d26, 0xa0},
|
|
{0x0414, 0x77},
|
|
{0x0415, 0x77},
|
|
{0x0416, 0x77},
|
|
{0x0417, 0x77},
|
|
{0x0155, 0x00},
|
|
{0x0170, 0x3e},
|
|
{0x0171, 0x3e},
|
|
{0x0172, 0x3e},
|
|
{0x0173, 0x3e},
|
|
{0x0428, 0x0b},
|
|
{0x0429, 0x0b},
|
|
{0x042a, 0x0b},
|
|
{0x042b, 0x0b},
|
|
{0x042c, 0x0b},
|
|
{0x042d, 0x0b},
|
|
{0x042e, 0x0b},
|
|
{0x042f, 0x0b},
|
|
{0x0430, 0x05},
|
|
{0x0431, 0x05},
|
|
{0x0432, 0x05},
|
|
{0x0433, 0x05},
|
|
{0x0434, 0x04},
|
|
{0x0435, 0x04},
|
|
{0x0436, 0x04},
|
|
{0x0437, 0x04},
|
|
{0x0438, 0x18},
|
|
{0x0439, 0x18},
|
|
{0x043a, 0x18},
|
|
{0x043b, 0x18},
|
|
{0x043c, 0x1d},
|
|
{0x043d, 0x20},
|
|
{0x043e, 0x22},
|
|
{0x043f, 0x24},
|
|
{0x0468, 0x04},
|
|
{0x0469, 0x04},
|
|
{0x046a, 0x04},
|
|
{0x046b, 0x04},
|
|
{0x046c, 0x04},
|
|
{0x046d, 0x04},
|
|
{0x046e, 0x04},
|
|
{0x046f, 0x04},
|
|
{0x0108, 0xf0},
|
|
{0x0109, 0x80},
|
|
{0x0d03, 0x05},
|
|
{0x0d04, 0x00},
|
|
{0x007a, 0x60},
|
|
{0x00d0, 0x00},
|
|
{0x0080, 0x09},
|
|
{0x0291, 0x0f},
|
|
{0x0292, 0xff},
|
|
{0x0201, 0x27},
|
|
{0x0202, 0x53},
|
|
{0x0203, 0x4e},
|
|
{0x0206, 0x03},
|
|
{0x0212, 0x0b},
|
|
{0x0213, 0x40},
|
|
{0x0215, 0x10},
|
|
{0x03fe, 0x10},
|
|
{0x0183, 0x09},
|
|
{0x0187, 0x51},
|
|
{0x0d22, 0x01},
|
|
{0x0d21, 0x2c},
|
|
{0x0d03, 0x00},
|
|
{0x0d04, 0x40},
|
|
{0x0d23, 0x0e},
|
|
{0x03fe, 0x00},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct regval gc3003_linear_10_1920x528_regs[] = {
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0xf0},
|
|
{0x03fe, 0x00},
|
|
{0x03f3, 0x00},
|
|
{0x03f5, 0xc0},
|
|
{0x03f6, 0x06},
|
|
{0x03f7, 0x01},
|
|
{0x03f8, 0x46},
|
|
{0x03f9, 0x13},
|
|
{0x03fa, 0x00},
|
|
{0x03e0, 0x16},
|
|
{0x03e1, 0x0d},
|
|
{0x03e2, 0x30},
|
|
{0x03e4, 0x08},
|
|
{0x03fc, 0xce},
|
|
{0x0d05, 0x05},
|
|
{0x0d06, 0x40},
|
|
{0x0d76, 0x00},
|
|
{0x0d41, 0x02},
|
|
{0x0d42, 0x3c},
|
|
{0x0d09, 0x01},
|
|
{0x0d0a, 0x7a},
|
|
{0x000c, 0x02},
|
|
{0x0d0d, 0x02},
|
|
{0x0d0e, 0x10},//528
|
|
{0x000f, 0x09},
|
|
{0x0010, 0x08},
|
|
{0x0017, 0x0c},
|
|
{0x0d53, 0x12},
|
|
{0x0051, 0x03},
|
|
{0x0082, 0x01},
|
|
{0x0086, 0x20},
|
|
{0x008a, 0x01},
|
|
{0x008b, 0x1d},
|
|
{0x008c, 0x05},
|
|
{0x008d, 0xd0},
|
|
{0x0db7, 0x01},
|
|
{0x0db0, 0x05},
|
|
{0x0db1, 0x00},
|
|
{0x0db2, 0x04},
|
|
{0x0db3, 0x54},
|
|
{0x0db4, 0x00},
|
|
{0x0db5, 0x17},
|
|
{0x0db6, 0x08},
|
|
{0x0d25, 0xcb},
|
|
{0x0d4a, 0x04},
|
|
{0x00d2, 0x70},
|
|
{0x00d7, 0x19},
|
|
{0x00d9, 0x10},
|
|
{0x00da, 0xc1},
|
|
{0x0d55, 0x1b},
|
|
{0x0d92, 0x17},
|
|
{0x0dc2, 0x30},
|
|
{0x0d2a, 0x30},
|
|
{0x0d19, 0x51},
|
|
{0x0d29, 0x30},
|
|
{0x0d20, 0x30},
|
|
{0x0d72, 0x12},
|
|
{0x0d4e, 0x12},
|
|
{0x0d43, 0x20},
|
|
{0x0050, 0x0c},
|
|
{0x006e, 0x03},
|
|
{0x0153, 0x50},
|
|
{0x0192, 0x00},
|
|
{0x0193, 0x00},
|
|
{0x0194, 0xc0},
|
|
{0x0195, 0x02},
|
|
{0x0196, 0x1c},
|
|
{0x0197, 0x07},
|
|
{0x0198, 0x80},
|
|
{0x0077, 0x01},
|
|
{0x0078, 0x65},
|
|
{0x0079, 0x04},
|
|
{0x0067, 0xc0},
|
|
{0x0054, 0xff},
|
|
{0x0055, 0x02},
|
|
{0x0056, 0x00},
|
|
{0x0057, 0x04},
|
|
{0x005a, 0xff},
|
|
{0x005b, 0x07},
|
|
{0x00d5, 0x03},
|
|
{0x0102, 0x10},
|
|
{0x0d4a, 0x04},
|
|
{0x04e0, 0xff},
|
|
{0x031e, 0x3e},
|
|
{0x0159, 0x01},
|
|
{0x014f, 0x28},
|
|
{0x0150, 0x40},
|
|
{0x0026, 0x00},
|
|
{0x0d26, 0xa0},
|
|
{0x0414, 0x77},
|
|
{0x0415, 0x77},
|
|
{0x0416, 0x77},
|
|
{0x0417, 0x77},
|
|
{0x0155, 0x00},
|
|
{0x0170, 0x3e},
|
|
{0x0171, 0x3e},
|
|
{0x0172, 0x3e},
|
|
{0x0173, 0x3e},
|
|
{0x0428, 0x0b},
|
|
{0x0429, 0x0b},
|
|
{0x042a, 0x0b},
|
|
{0x042b, 0x0b},
|
|
{0x042c, 0x0b},
|
|
{0x042d, 0x0b},
|
|
{0x042e, 0x0b},
|
|
{0x042f, 0x0b},
|
|
{0x0430, 0x05},
|
|
{0x0431, 0x05},
|
|
{0x0432, 0x05},
|
|
{0x0433, 0x05},
|
|
{0x0434, 0x04},
|
|
{0x0435, 0x04},
|
|
{0x0436, 0x04},
|
|
{0x0437, 0x04},
|
|
{0x0438, 0x18},
|
|
{0x0439, 0x18},
|
|
{0x043a, 0x18},
|
|
{0x043b, 0x18},
|
|
{0x043c, 0x1d},
|
|
{0x043d, 0x20},
|
|
{0x043e, 0x22},
|
|
{0x043f, 0x24},
|
|
{0x0468, 0x04},
|
|
{0x0469, 0x04},
|
|
{0x046a, 0x04},
|
|
{0x046b, 0x04},
|
|
{0x046c, 0x04},
|
|
{0x046d, 0x04},
|
|
{0x046e, 0x04},
|
|
{0x046f, 0x04},
|
|
{0x0108, 0xf0},
|
|
{0x0109, 0x80},
|
|
{0x0d03, 0x05},
|
|
{0x0d04, 0x00},
|
|
{0x007a, 0x60},
|
|
{0x00d0, 0x00},
|
|
{0x0080, 0x09},
|
|
{0x0291, 0x0f},
|
|
{0x0292, 0xff},
|
|
{0x0201, 0x27},
|
|
{0x0202, 0x53},
|
|
{0x0203, 0x4e},
|
|
{0x0206, 0x03},
|
|
{0x0212, 0x0b},
|
|
{0x0213, 0x40},
|
|
{0x0215, 0x12},
|
|
{0x023e, 0x99},
|
|
{0x03fe, 0x10},
|
|
{0x0183, 0x09},
|
|
{0x0187, 0x51},
|
|
{0x0d22, 0x01},
|
|
{0x0d21, 0x2c},
|
|
{0x0d03, 0x01},
|
|
{0x0d04, 0x00},
|
|
{0x0d23, 0x0e},
|
|
{0x03fe, 0x00},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct regval gc3003_stream_on_regs[] = {
|
|
{0x0201, 0x27},
|
|
{0x0202, 0x53},
|
|
{0x0203, 0x4e},
|
|
{0x0206, 0x03},
|
|
{0x0212, 0x0b},
|
|
{0x0213, 0x40},
|
|
{0x0215, 0x10},
|
|
{0x023e, 0x99},
|
|
{0x03fe, 0x00},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct regval gc3003_stand_by_regs[] = {
|
|
{0x023e, 0x00},
|
|
{0x03f7, 0x00},
|
|
{0x03fc, 0x01},
|
|
{0x03f9, 0x01},
|
|
{REG_NULL, 0x00},
|
|
};
|
|
|
|
static const struct gc3003_mode supported_modes[] = {
|
|
{
|
|
.width = 2304,
|
|
.height = 1298,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 300000,
|
|
},
|
|
.exp_def = 0x0500,
|
|
.hts_def = 0x540 * 2,
|
|
.vts_def = 0x053c,
|
|
.bus_fmt = MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
.reg_list = gc3003_linear_10_2304x1298_regs,
|
|
.stream_on_reg_list = gc3003_stream_on_regs,
|
|
.stand_by_reg_list = gc3003_stand_by_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.vc[PAD0] = 0,
|
|
},
|
|
{
|
|
.width = 320,
|
|
.height = 240,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 1200000,
|
|
},
|
|
.exp_def = 0x0100,
|
|
.hts_def = 0x05dc * 2,
|
|
.vts_def = 0x12c,
|
|
.bus_fmt = MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
.reg_list = gc3003_linear_10_320x240_regs,
|
|
.stream_on_reg_list = gc3003_stream_on_regs,
|
|
.stand_by_reg_list = gc3003_stand_by_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.vc[PAD0] = 0,
|
|
},
|
|
{
|
|
.width = 1920,
|
|
.height = 528,
|
|
.max_fps = {
|
|
.numerator = 10000,
|
|
.denominator = 700000,
|
|
},
|
|
.exp_def = 0x0100,
|
|
.hts_def = 0x05dc * 2,
|
|
.vts_def = 0x23c,
|
|
.bus_fmt = MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
.reg_list = gc3003_linear_10_1920x528_regs,
|
|
.stream_on_reg_list = gc3003_stream_on_regs,
|
|
.stand_by_reg_list = gc3003_stand_by_regs,
|
|
.hdr_mode = NO_HDR,
|
|
.vc[PAD0] = 0,
|
|
},
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
GC3003_LINK_FREQ_LINEAR,
|
|
};
|
|
|
|
static const char * const gc3003_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Vertical Color Bar Type 1",
|
|
"Vertical Color Bar Type 2",
|
|
"Vertical Color Bar Type 3",
|
|
"Vertical Color Bar Type 4"
|
|
};
|
|
|
|
/* Write registers up to 4 at a time */
|
|
static int gc3003_write_reg(struct i2c_client *client, u16 reg,
|
|
u32 len, u32 val)
|
|
{
|
|
u32 buf_i, val_i;
|
|
u8 buf[6];
|
|
u8 *val_p;
|
|
__be32 val_be;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
buf[0] = reg >> 8;
|
|
buf[1] = reg & 0xff;
|
|
|
|
val_be = cpu_to_be32(val);
|
|
val_p = (u8 *)&val_be;
|
|
buf_i = 2;
|
|
val_i = 4 - len;
|
|
|
|
while (val_i < 4)
|
|
buf[buf_i++] = val_p[val_i++];
|
|
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_write_array(struct i2c_client *client,
|
|
const struct regval *regs)
|
|
{
|
|
u32 i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
|
|
ret = gc3003_write_reg(client, regs[i].addr,
|
|
GC3003_REG_VALUE_08BIT, regs[i].val);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Read registers up to 4 at a time */
|
|
static int gc3003_read_reg(struct i2c_client *client, u16 reg,
|
|
unsigned int len, u32 *val)
|
|
{
|
|
struct i2c_msg msgs[2];
|
|
u8 *data_be_p;
|
|
__be32 data_be = 0;
|
|
__be16 reg_addr_be = cpu_to_be16(reg);
|
|
int ret;
|
|
|
|
if (len > 4 || !len)
|
|
return -EINVAL;
|
|
|
|
data_be_p = (u8 *)&data_be;
|
|
/* Write register address */
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = 2;
|
|
msgs[0].buf = (u8 *)®_addr_be;
|
|
|
|
/* Read data from register */
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_be_p[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = be32_to_cpu(data_be);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_get_reso_dist(const struct gc3003_mode *mode,
|
|
struct v4l2_mbus_framefmt *framefmt)
|
|
{
|
|
return abs(mode->width - framefmt->width) +
|
|
abs(mode->height - framefmt->height);
|
|
}
|
|
|
|
static const struct gc3003_mode *
|
|
gc3003_find_best_fit(struct gc3003 *gc3003, struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct v4l2_mbus_framefmt *framefmt = &fmt->format;
|
|
int dist;
|
|
int cur_best_fit = 0;
|
|
int cur_best_fit_dist = -1;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < gc3003->cfg_num; i++) {
|
|
dist = gc3003_get_reso_dist(&supported_modes[i], framefmt);
|
|
if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) {
|
|
cur_best_fit_dist = dist;
|
|
cur_best_fit = i;
|
|
}
|
|
}
|
|
|
|
return &supported_modes[cur_best_fit];
|
|
}
|
|
|
|
static int gc3003_set_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
const struct gc3003_mode *mode;
|
|
s64 h_blank, vblank_def;
|
|
|
|
mutex_lock(&gc3003->mutex);
|
|
|
|
mode = gc3003_find_best_fit(gc3003, fmt);
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
|
|
#else
|
|
mutex_unlock(&gc3003->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
gc3003->cur_mode = mode;
|
|
h_blank = mode->hts_def - mode->width;
|
|
__v4l2_ctrl_modify_range(gc3003->hblank, h_blank,
|
|
h_blank, 1, h_blank);
|
|
vblank_def = mode->vts_def - mode->height;
|
|
__v4l2_ctrl_modify_range(gc3003->vblank, vblank_def,
|
|
GC3003_VTS_MAX - mode->height,
|
|
1, vblank_def);
|
|
|
|
gc3003->cur_link_freq = 0;
|
|
gc3003->cur_pixel_rate = GC3003_PIXEL_RATE_LINEAR;
|
|
|
|
__v4l2_ctrl_s_ctrl_int64(gc3003->pixel_rate,
|
|
gc3003->cur_pixel_rate);
|
|
__v4l2_ctrl_s_ctrl(gc3003->link_freq,
|
|
gc3003->cur_link_freq);
|
|
gc3003->cur_vts = mode->vts_def;
|
|
}
|
|
|
|
mutex_unlock(&gc3003->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_get_fmt(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
const struct gc3003_mode *mode = gc3003->cur_mode;
|
|
|
|
mutex_lock(&gc3003->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
fmt->format = *v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
|
#else
|
|
mutex_unlock(&gc3003->mutex);
|
|
return -ENOTTY;
|
|
#endif
|
|
} else {
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
fmt->format.code = mode->bus_fmt;
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
}
|
|
mutex_unlock(&gc3003->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
if (code->index != 0)
|
|
return -EINVAL;
|
|
code->code = gc3003->cur_mode->bus_fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_enum_frame_sizes(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
if (fse->index >= gc3003->cfg_num)
|
|
return -EINVAL;
|
|
|
|
if (fse->code != supported_modes[0].bus_fmt)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = supported_modes[fse->index].width;
|
|
fse->max_height = supported_modes[fse->index].height;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_enable_test_pattern(struct gc3003 *gc3003, u32 pattern)
|
|
{
|
|
u32 val;
|
|
|
|
if (pattern)
|
|
val = GC3003_TEST_PATTERN_ENABLE;
|
|
else
|
|
val = GC3003_TEST_PATTERN_DISABLE;
|
|
|
|
return gc3003_write_reg(gc3003->client, GC3003_REG_TEST_PATTERN,
|
|
GC3003_REG_VALUE_08BIT, val);
|
|
}
|
|
static int gc3003_set_gain_reg(struct gc3003 *gc3003, u32 gain)
|
|
{
|
|
int i;
|
|
int total;
|
|
u32 tol_dig_gain = 0;
|
|
|
|
if (gain < 64)
|
|
gain = 64;
|
|
total = sizeof(gain_level_table) / sizeof(u32) - 1; // why -1
|
|
for (i = 0; i < total; i++) {
|
|
if (gain_level_table[i] <= gain &&
|
|
gain < gain_level_table[i + 1])
|
|
break;
|
|
}
|
|
tol_dig_gain = gain * 64 / gain_level_table[i];
|
|
if (i >= total)
|
|
i = total - 1;
|
|
|
|
gc3003_write_reg(gc3003->client, 0x0d1,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][0]);
|
|
gc3003_write_reg(gc3003->client, 0x0d0,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][1]);
|
|
gc3003_write_reg(gc3003->client, 0x080,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][2]);
|
|
gc3003_write_reg(gc3003->client, 0x155,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][3]);
|
|
gc3003_write_reg(gc3003->client, 0x0b8,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][4]);
|
|
gc3003_write_reg(gc3003->client, 0x0b9,
|
|
GC3003_REG_VALUE_08BIT, reg_val_table_liner[i][5]);
|
|
gc3003_write_reg(gc3003->client, 0x0b1,
|
|
GC3003_REG_VALUE_08BIT, (tol_dig_gain >> 6));
|
|
gc3003_write_reg(gc3003->client, 0x0b2,
|
|
GC3003_REG_VALUE_08BIT, ((tol_dig_gain & 0x3f)<<2));
|
|
|
|
return 0;
|
|
}
|
|
static int gc3003_g_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
const struct gc3003_mode *mode = gc3003->cur_mode;
|
|
|
|
fi->interval = mode->max_fps;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_g_mbus_config(struct v4l2_subdev *sd, unsigned int pad_id,
|
|
struct v4l2_mbus_config *config)
|
|
{
|
|
config->type = V4L2_MBUS_CSI2_DPHY;
|
|
config->bus.mipi_csi2.num_data_lanes = GC3003_LANES;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gc3003_get_module_inf(struct gc3003 *gc3003,
|
|
struct rkmodule_inf *inf)
|
|
{
|
|
memset(inf, 0, sizeof(*inf));
|
|
strscpy(inf->base.sensor, GC3003_NAME, sizeof(inf->base.sensor));
|
|
strscpy(inf->base.module, gc3003->module_name,
|
|
sizeof(inf->base.module));
|
|
strscpy(inf->base.lens, gc3003->len_name, sizeof(inf->base.lens));
|
|
}
|
|
|
|
static int gc3003_get_channel_info(struct gc3003 *gc3003, struct rkmodule_channel_info *ch_info)
|
|
{
|
|
if (ch_info->index < PAD0 || ch_info->index >= PAD_MAX)
|
|
return -EINVAL;
|
|
ch_info->vc = gc3003->cur_mode->vc[ch_info->index];
|
|
ch_info->width = gc3003->cur_mode->width;
|
|
ch_info->height = gc3003->cur_mode->height;
|
|
ch_info->bus_fmt = gc3003->cur_mode->bus_fmt;
|
|
return 0;
|
|
}
|
|
|
|
static long gc3003_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
struct rkmodule_hdr_cfg *hdr;
|
|
u32 i, h, w;
|
|
long ret = 0;
|
|
u32 stream = 0;
|
|
struct rkmodule_channel_info *ch_info;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
gc3003_get_module_inf(gc3003, (struct rkmodule_inf *)arg);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr = (struct rkmodule_hdr_cfg *)arg;
|
|
hdr->esp.mode = HDR_NORMAL_VC;
|
|
hdr->hdr_mode = gc3003->cur_mode->hdr_mode;
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr = (struct rkmodule_hdr_cfg *)arg;
|
|
w = gc3003->cur_mode->width;
|
|
h = gc3003->cur_mode->height;
|
|
for (i = 0; i < gc3003->cfg_num; i++) {
|
|
if (w == supported_modes[i].width &&
|
|
h == supported_modes[i].height &&
|
|
supported_modes[i].hdr_mode == hdr->hdr_mode) {
|
|
gc3003->cur_mode = &supported_modes[i];
|
|
break;
|
|
}
|
|
}
|
|
if (i == gc3003->cfg_num) {
|
|
dev_err(&gc3003->client->dev,
|
|
"not find hdr mode:%d %dx%d config\n",
|
|
hdr->hdr_mode, w, h);
|
|
ret = -EINVAL;
|
|
} else {
|
|
w = gc3003->cur_mode->hts_def -
|
|
gc3003->cur_mode->width;
|
|
h = gc3003->cur_mode->vts_def -
|
|
gc3003->cur_mode->height;
|
|
__v4l2_ctrl_modify_range(gc3003->hblank, w, w, 1, w);
|
|
__v4l2_ctrl_modify_range(gc3003->vblank, h,
|
|
GC3003_VTS_MAX -
|
|
gc3003->cur_mode->height,
|
|
1, h);
|
|
gc3003->cur_link_freq = 0;
|
|
gc3003->cur_pixel_rate = GC3003_PIXEL_RATE_LINEAR;
|
|
|
|
__v4l2_ctrl_s_ctrl_int64(gc3003->pixel_rate,
|
|
gc3003->cur_pixel_rate);
|
|
__v4l2_ctrl_s_ctrl(gc3003->link_freq,
|
|
gc3003->cur_link_freq);
|
|
gc3003->cur_vts = gc3003->cur_mode->vts_def;
|
|
}
|
|
break;
|
|
case PREISP_CMD_SET_HDRAE_EXP:
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
|
|
stream = *((u32 *)arg);
|
|
|
|
if (stream)
|
|
ret = gc3003_write_reg(gc3003->client, GC3003_REG_CTRL_MODE,
|
|
GC3003_REG_VALUE_08BIT, GC3003_MODE_STREAMING);
|
|
else
|
|
ret = gc3003_write_reg(gc3003->client, GC3003_REG_CTRL_MODE,
|
|
GC3003_REG_VALUE_08BIT, GC3003_MODE_SW_STANDBY);
|
|
break;
|
|
case RKMODULE_GET_CHANNEL_INFO:
|
|
ch_info = (struct rkmodule_channel_info *)arg;
|
|
ret = gc3003_get_channel_info(gc3003, ch_info);
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
static long gc3003_compat_ioctl32(struct v4l2_subdev *sd,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
void __user *up = compat_ptr(arg);
|
|
struct rkmodule_inf *inf;
|
|
struct rkmodule_awb_cfg *cfg;
|
|
struct rkmodule_hdr_cfg *hdr;
|
|
struct preisp_hdrae_exp_s *hdrae;
|
|
long ret;
|
|
u32 stream = 0;
|
|
struct rkmodule_channel_info *ch_info;
|
|
|
|
switch (cmd) {
|
|
case RKMODULE_GET_MODULE_INFO:
|
|
inf = kzalloc(sizeof(*inf), GFP_KERNEL);
|
|
if (!inf) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = gc3003_ioctl(sd, cmd, inf);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, inf, sizeof(*inf));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(inf);
|
|
break;
|
|
case RKMODULE_AWB_CFG:
|
|
cfg = kzalloc(sizeof(*cfg), GFP_KERNEL);
|
|
if (!cfg) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(cfg, up, sizeof(*cfg));
|
|
if (!ret)
|
|
ret = gc3003_ioctl(sd, cmd, cfg);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(cfg);
|
|
break;
|
|
case RKMODULE_GET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = gc3003_ioctl(sd, cmd, hdr);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, hdr, sizeof(*hdr));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(hdr);
|
|
break;
|
|
case RKMODULE_SET_HDR_CFG:
|
|
hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
|
|
if (!hdr) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(hdr, up, sizeof(*hdr));
|
|
if (!ret)
|
|
ret = gc3003_ioctl(sd, cmd, hdr);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(hdr);
|
|
break;
|
|
case PREISP_CMD_SET_HDRAE_EXP:
|
|
hdrae = kzalloc(sizeof(*hdrae), GFP_KERNEL);
|
|
if (!hdrae) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = copy_from_user(hdrae, up, sizeof(*hdrae));
|
|
if (!ret)
|
|
ret = gc3003_ioctl(sd, cmd, hdrae);
|
|
else
|
|
ret = -EFAULT;
|
|
kfree(hdrae);
|
|
break;
|
|
case RKMODULE_SET_QUICK_STREAM:
|
|
ret = copy_from_user(&stream, up, sizeof(u32));
|
|
if (!ret)
|
|
ret = gc3003_ioctl(sd, cmd, &stream);
|
|
else
|
|
ret = -EFAULT;
|
|
break;
|
|
case RKMODULE_GET_CHANNEL_INFO:
|
|
ch_info = kzalloc(sizeof(*ch_info), GFP_KERNEL);
|
|
if (!ch_info) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
|
|
ret = gc3003_ioctl(sd, cmd, ch_info);
|
|
if (!ret) {
|
|
ret = copy_to_user(up, ch_info, sizeof(*ch_info));
|
|
if (ret)
|
|
ret = -EFAULT;
|
|
}
|
|
kfree(ch_info);
|
|
break;
|
|
default:
|
|
ret = -ENOIOCTLCMD;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int __gc3003_start_stream(struct gc3003 *gc3003)
|
|
{
|
|
int ret;
|
|
|
|
if (!gc3003->is_thunderboot) {
|
|
ret = gc3003_write_array(gc3003->client, gc3003->cur_mode->reg_list);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* In case these controls are set before streaming */
|
|
ret = __v4l2_ctrl_handler_setup(&gc3003->ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
if (gc3003->has_init_exp && gc3003->cur_mode->hdr_mode != NO_HDR) {
|
|
ret = gc3003_ioctl(&gc3003->subdev, PREISP_CMD_SET_HDRAE_EXP,
|
|
&gc3003->init_hdrae_exp);
|
|
if (ret) {
|
|
dev_err(&gc3003->client->dev,
|
|
"init exp fail in hdr mode\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = gc3003_write_array(gc3003->client, gc3003->cur_mode->stream_on_reg_list);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __gc3003_stop_stream(struct gc3003 *gc3003)
|
|
{
|
|
int ret;
|
|
|
|
gc3003->has_init_exp = false;
|
|
if (gc3003->is_thunderboot) {
|
|
gc3003->is_first_streamoff = true;
|
|
pm_runtime_put(&gc3003->client->dev);
|
|
}
|
|
ret = gc3003_write_array(gc3003->client, gc3003->cur_mode->stand_by_reg_list);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __gc3003_power_on(struct gc3003 *gc3003);
|
|
static int gc3003_s_stream(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
struct i2c_client *client = gc3003->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&gc3003->mutex);
|
|
on = !!on;
|
|
if (on == gc3003->streaming)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
if (gc3003->is_thunderboot && rkisp_tb_get_state() == RKISP_TB_NG) {
|
|
gc3003->is_thunderboot = false;
|
|
__gc3003_power_on(gc3003);
|
|
}
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
ret = __gc3003_start_stream(gc3003);
|
|
if (ret) {
|
|
v4l2_err(sd, "start stream failed while write regs\n");
|
|
pm_runtime_put(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
} else {
|
|
__gc3003_stop_stream(gc3003);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
gc3003->streaming = on;
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&gc3003->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc3003_s_power(struct v4l2_subdev *sd, int on)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
struct i2c_client *client = gc3003->client;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&gc3003->mutex);
|
|
|
|
/* If the power state is not modified - no work to do. */
|
|
if (gc3003->power_on == !!on)
|
|
goto unlock_and_return;
|
|
|
|
if (on) {
|
|
ret = pm_runtime_get_sync(&client->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
|
|
if (!gc3003->is_thunderboot) {
|
|
ret = gc3003_write_array(gc3003->client, gc3003_global_regs);
|
|
if (ret) {
|
|
v4l2_err(sd, "could not set init registers\n");
|
|
pm_runtime_put_noidle(&client->dev);
|
|
goto unlock_and_return;
|
|
}
|
|
}
|
|
|
|
gc3003->power_on = true;
|
|
} else {
|
|
pm_runtime_put(&client->dev);
|
|
gc3003->power_on = false;
|
|
}
|
|
|
|
unlock_and_return:
|
|
mutex_unlock(&gc3003->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Calculate the delay in us by clock rate and clock cycles */
|
|
static inline u32 gc3003_cal_delay(u32 cycles)
|
|
{
|
|
return DIV_ROUND_UP(cycles, GC3003_XVCLK_FREQ / 1000 / 1000);
|
|
}
|
|
|
|
static int __gc3003_power_on(struct gc3003 *gc3003)
|
|
{
|
|
int ret;
|
|
u32 delay_us;
|
|
struct device *dev = &gc3003->client->dev;
|
|
|
|
if (!IS_ERR_OR_NULL(gc3003->pins_default)) {
|
|
ret = pinctrl_select_state(gc3003->pinctrl,
|
|
gc3003->pins_default);
|
|
if (ret < 0)
|
|
dev_err(dev, "could not set pins\n");
|
|
}
|
|
ret = clk_set_rate(gc3003->xvclk, GC3003_XVCLK_FREQ);
|
|
if (ret < 0)
|
|
dev_warn(dev, "Failed to set xvclk rate (24MHz)\n");
|
|
if (clk_get_rate(gc3003->xvclk) != GC3003_XVCLK_FREQ)
|
|
dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n");
|
|
ret = clk_prepare_enable(gc3003->xvclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable xvclk\n");
|
|
return ret;
|
|
}
|
|
|
|
if (gc3003->is_thunderboot)
|
|
return 0;
|
|
|
|
if (!IS_ERR(gc3003->reset_gpio))
|
|
gpiod_set_value_cansleep(gc3003->reset_gpio, 0);
|
|
|
|
if (!IS_ERR(gc3003->pwdn_gpio))
|
|
gpiod_set_value_cansleep(gc3003->pwdn_gpio, 0);
|
|
|
|
usleep_range(500, 1000);
|
|
ret = regulator_bulk_enable(GC3003_NUM_SUPPLIES, gc3003->supplies);
|
|
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulators\n");
|
|
goto disable_clk;
|
|
}
|
|
|
|
if (!IS_ERR(gc3003->pwren_gpio))
|
|
gpiod_set_value_cansleep(gc3003->pwren_gpio, 1);
|
|
|
|
usleep_range(1000, 1100);
|
|
if (!IS_ERR(gc3003->pwdn_gpio))
|
|
gpiod_set_value_cansleep(gc3003->pwdn_gpio, 1);
|
|
usleep_range(100, 150);
|
|
if (!IS_ERR(gc3003->reset_gpio))
|
|
gpiod_set_value_cansleep(gc3003->reset_gpio, 1);
|
|
|
|
/* 8192 cycles prior to first SCCB transaction */
|
|
delay_us = gc3003_cal_delay(8192);
|
|
usleep_range(delay_us, delay_us * 2);
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(gc3003->xvclk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __gc3003_power_off(struct gc3003 *gc3003)
|
|
{
|
|
int ret;
|
|
struct device *dev = &gc3003->client->dev;
|
|
|
|
clk_disable_unprepare(gc3003->xvclk);
|
|
if (gc3003->is_thunderboot) {
|
|
if (gc3003->is_first_streamoff) {
|
|
gc3003->is_thunderboot = false;
|
|
gc3003->is_first_streamoff = false;
|
|
} else {
|
|
return;
|
|
}
|
|
}
|
|
|
|
if (!IS_ERR(gc3003->pwdn_gpio))
|
|
gpiod_set_value_cansleep(gc3003->pwdn_gpio, 0);
|
|
clk_disable_unprepare(gc3003->xvclk);
|
|
if (!IS_ERR(gc3003->reset_gpio))
|
|
gpiod_set_value_cansleep(gc3003->reset_gpio, 0);
|
|
if (!IS_ERR_OR_NULL(gc3003->pins_sleep)) {
|
|
ret = pinctrl_select_state(gc3003->pinctrl,
|
|
gc3003->pins_sleep);
|
|
if (ret < 0)
|
|
dev_dbg(dev, "could not set pins\n");
|
|
}
|
|
regulator_bulk_disable(GC3003_NUM_SUPPLIES, gc3003->supplies);
|
|
}
|
|
|
|
static int gc3003_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
return __gc3003_power_on(gc3003);
|
|
}
|
|
|
|
static int gc3003_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
__gc3003_power_off(gc3003);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static int gc3003_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0);
|
|
const struct gc3003_mode *def_mode = &supported_modes[0];
|
|
|
|
mutex_lock(&gc3003->mutex);
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = def_mode->width;
|
|
try_fmt->height = def_mode->height;
|
|
try_fmt->code = def_mode->bus_fmt;
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
mutex_unlock(&gc3003->mutex);
|
|
/* No crop or compose */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int gc3003_enum_frame_interval(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
if (fie->index >= gc3003->cfg_num)
|
|
return -EINVAL;
|
|
|
|
fie->code = supported_modes[fie->index].bus_fmt;
|
|
fie->width = supported_modes[fie->index].width;
|
|
fie->height = supported_modes[fie->index].height;
|
|
fie->interval = supported_modes[fie->index].max_fps;
|
|
fie->reserved[0] = supported_modes[fie->index].hdr_mode;
|
|
return 0;
|
|
}
|
|
|
|
#define DST_WIDTH 2304
|
|
#define DST_HEIGHT 1296
|
|
|
|
/*
|
|
* The resolution of the driver configuration needs to be exactly
|
|
* the same as the current output resolution of the sensor,
|
|
* the input width of the isp needs to be 16 aligned,
|
|
* the input height of the isp needs to be 8 aligned.
|
|
* Can be cropped to standard resolution by this function,
|
|
* otherwise it will crop out strange resolution according
|
|
* to the alignment rules.
|
|
*/
|
|
static int gc3003_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
/*
|
|
* From "Pixel Array Image Drawing in All scan mode",
|
|
* there are 12 pixel offset on horizontal and vertical.
|
|
*/
|
|
if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) {
|
|
sel->r.left = 0;
|
|
sel->r.width = DST_WIDTH;
|
|
sel->r.top = 0;
|
|
sel->r.height = DST_HEIGHT;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct dev_pm_ops gc3003_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(gc3003_runtime_suspend,
|
|
gc3003_runtime_resume, NULL)
|
|
};
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
static const struct v4l2_subdev_internal_ops gc3003_internal_ops = {
|
|
.open = gc3003_open,
|
|
};
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops gc3003_core_ops = {
|
|
.s_power = gc3003_s_power,
|
|
.ioctl = gc3003_ioctl,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl32 = gc3003_compat_ioctl32,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops gc3003_video_ops = {
|
|
.s_stream = gc3003_s_stream,
|
|
.g_frame_interval = gc3003_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops gc3003_pad_ops = {
|
|
.enum_mbus_code = gc3003_enum_mbus_code,
|
|
.enum_frame_size = gc3003_enum_frame_sizes,
|
|
.enum_frame_interval = gc3003_enum_frame_interval,
|
|
.get_fmt = gc3003_get_fmt,
|
|
.set_fmt = gc3003_set_fmt,
|
|
.get_selection = gc3003_get_selection,
|
|
.get_mbus_config = gc3003_g_mbus_config,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops gc3003_subdev_ops = {
|
|
.core = &gc3003_core_ops,
|
|
.video = &gc3003_video_ops,
|
|
.pad = &gc3003_pad_ops,
|
|
};
|
|
|
|
static int gc3003_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct gc3003 *gc3003 = container_of(ctrl->handler,
|
|
struct gc3003, ctrl_handler);
|
|
struct i2c_client *client = gc3003->client;
|
|
s64 max;
|
|
int ret = 0;
|
|
int val = 0;
|
|
|
|
/*Propagate change of current control to all related controls*/
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_VBLANK:
|
|
/*Update max exposure while meeting expected vblanking*/
|
|
max = gc3003->cur_mode->height + ctrl->val - 4;
|
|
__v4l2_ctrl_modify_range(gc3003->exposure,
|
|
gc3003->exposure->minimum,
|
|
max,
|
|
gc3003->exposure->step,
|
|
gc3003->exposure->default_value);
|
|
break;
|
|
}
|
|
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
/* 4 least significant bits of expsoure are fractional part */
|
|
ret = gc3003_write_reg(gc3003->client, GC3003_REG_EXPOSURE_H,
|
|
GC3003_REG_VALUE_08BIT,
|
|
ctrl->val >> 8);
|
|
ret |= gc3003_write_reg(gc3003->client, GC3003_REG_EXPOSURE_L,
|
|
GC3003_REG_VALUE_08BIT,
|
|
ctrl->val & 0xff);
|
|
break;
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = gc3003_set_gain_reg(gc3003, ctrl->val);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
gc3003->cur_vts = ctrl->val + gc3003->cur_mode->height;
|
|
ret = gc3003_write_reg(gc3003->client, GC3003_REG_VTS_H,
|
|
GC3003_REG_VALUE_08BIT,
|
|
gc3003->cur_vts >> 8);
|
|
ret |= gc3003_write_reg(gc3003->client, GC3003_REG_VTS_L,
|
|
GC3003_REG_VALUE_08BIT,
|
|
gc3003->cur_vts & 0xff);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = gc3003_enable_test_pattern(gc3003, ctrl->val);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ret = gc3003_read_reg(gc3003->client, GC3003_FLIP_MIRROR_REG,
|
|
GC3003_REG_VALUE_08BIT, &val);
|
|
if (ctrl->val)
|
|
val |= GC3003_MIRROR_BIT_MASK;
|
|
else
|
|
val &= ~GC3003_MIRROR_BIT_MASK;
|
|
ret |= gc3003_write_reg(gc3003->client, GC3003_FLIP_MIRROR_REG,
|
|
GC3003_REG_VALUE_08BIT, val);
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
ret = gc3003_read_reg(gc3003->client, GC3003_FLIP_MIRROR_REG,
|
|
GC3003_REG_VALUE_08BIT, &val);
|
|
if (ctrl->val)
|
|
val |= GC3003_FLIP_BIT_MASK;
|
|
else
|
|
val &= ~GC3003_FLIP_BIT_MASK;
|
|
ret |= gc3003_write_reg(gc3003->client, GC3003_FLIP_MIRROR_REG,
|
|
GC3003_REG_VALUE_08BIT, val);
|
|
break;
|
|
default:
|
|
dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
|
|
__func__, ctrl->id, ctrl->val);
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops gc3003_ctrl_ops = {
|
|
.s_ctrl = gc3003_set_ctrl,
|
|
};
|
|
|
|
static int gc3003_initialize_controls(struct gc3003 *gc3003)
|
|
{
|
|
const struct gc3003_mode *mode;
|
|
struct v4l2_ctrl_handler *handler;
|
|
s64 exposure_max, vblank_def;
|
|
u32 h_blank;
|
|
int ret;
|
|
|
|
handler = &gc3003->ctrl_handler;
|
|
mode = gc3003->cur_mode;
|
|
ret = v4l2_ctrl_handler_init(handler, 9);
|
|
if (ret)
|
|
return ret;
|
|
handler->lock = &gc3003->mutex;
|
|
|
|
gc3003->link_freq = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ,
|
|
0, 0, link_freq_menu_items);
|
|
gc3003->cur_link_freq = 0;
|
|
gc3003->cur_pixel_rate = GC3003_PIXEL_RATE_LINEAR;
|
|
|
|
__v4l2_ctrl_s_ctrl(gc3003->link_freq,
|
|
gc3003->cur_link_freq);
|
|
|
|
gc3003->pixel_rate = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE,
|
|
0, GC3003_PIXEL_RATE_LINEAR, 1, GC3003_PIXEL_RATE_LINEAR);
|
|
|
|
h_blank = mode->hts_def - mode->width;
|
|
gc3003->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
|
|
h_blank, h_blank, 1, h_blank);
|
|
if (gc3003->hblank)
|
|
gc3003->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
vblank_def = mode->vts_def - mode->height;
|
|
gc3003->cur_vts = mode->vts_def;
|
|
gc3003->vblank = v4l2_ctrl_new_std(handler, &gc3003_ctrl_ops,
|
|
V4L2_CID_VBLANK, vblank_def,
|
|
GC3003_VTS_MAX - mode->height,
|
|
1, vblank_def);
|
|
|
|
exposure_max = mode->vts_def - 4;
|
|
gc3003->exposure = v4l2_ctrl_new_std(handler, &gc3003_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
GC3003_EXPOSURE_MIN,
|
|
exposure_max,
|
|
GC3003_EXPOSURE_STEP,
|
|
mode->exp_def);
|
|
|
|
gc3003->anal_gain = v4l2_ctrl_new_std(handler, &gc3003_ctrl_ops,
|
|
V4L2_CID_ANALOGUE_GAIN,
|
|
GC3003_GAIN_MIN,
|
|
GC3003_GAIN_MAX,
|
|
GC3003_GAIN_STEP,
|
|
GC3003_GAIN_DEFAULT);
|
|
|
|
gc3003->test_pattern =
|
|
v4l2_ctrl_new_std_menu_items(handler,
|
|
&gc3003_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(gc3003_test_pattern_menu) - 1,
|
|
0, 0, gc3003_test_pattern_menu);
|
|
|
|
gc3003->h_flip = v4l2_ctrl_new_std(handler, &gc3003_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
|
|
gc3003->v_flip = v4l2_ctrl_new_std(handler, &gc3003_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
if (handler->error) {
|
|
ret = handler->error;
|
|
dev_err(&gc3003->client->dev,
|
|
"Failed to init controls(%d)\n", ret);
|
|
goto err_free_handler;
|
|
}
|
|
|
|
gc3003->subdev.ctrl_handler = handler;
|
|
gc3003->has_init_exp = false;
|
|
|
|
return 0;
|
|
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(handler);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gc3003_check_sensor_id(struct gc3003 *gc3003,
|
|
struct i2c_client *client)
|
|
{
|
|
struct device *dev = &gc3003->client->dev;
|
|
u16 id = 0;
|
|
u32 reg_H = 0;
|
|
u32 reg_L = 0;
|
|
int ret;
|
|
|
|
if (gc3003->is_thunderboot) {
|
|
dev_info(dev, "Enable thunderboot mode, skip sensor id check\n");
|
|
return 0;
|
|
}
|
|
|
|
ret = gc3003_read_reg(client, GC3003_REG_CHIP_ID_H,
|
|
GC3003_REG_VALUE_08BIT, ®_H);
|
|
ret |= gc3003_read_reg(client, GC3003_REG_CHIP_ID_L,
|
|
GC3003_REG_VALUE_08BIT, ®_L);
|
|
|
|
id = ((reg_H << 8) & 0xff00) | (reg_L & 0xff);
|
|
if (!(reg_H == (CHIP_ID >> 8) || reg_L == (CHIP_ID & 0xff))) {
|
|
dev_err(dev, "Unexpected sensor id(%06x), ret(%d)\n", id, ret);
|
|
return -ENODEV;
|
|
}
|
|
dev_info(dev, "detected gc%04x sensor\n", id);
|
|
return 0;
|
|
}
|
|
|
|
static int gc3003_configure_regulators(struct gc3003 *gc3003)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < GC3003_NUM_SUPPLIES; i++)
|
|
gc3003->supplies[i].supply = gc3003_supply_names[i];
|
|
|
|
return devm_regulator_bulk_get(&gc3003->client->dev,
|
|
GC3003_NUM_SUPPLIES,
|
|
gc3003->supplies);
|
|
}
|
|
|
|
static int gc3003_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct gc3003 *gc3003;
|
|
struct v4l2_subdev *sd;
|
|
char facing[2];
|
|
int ret;
|
|
u32 i, hdr_mode = 0;
|
|
|
|
dev_info(dev, "driver version: %02x.%02x.%02x",
|
|
DRIVER_VERSION >> 16,
|
|
(DRIVER_VERSION & 0xff00) >> 8,
|
|
DRIVER_VERSION & 0x00ff);
|
|
|
|
gc3003 = devm_kzalloc(dev, sizeof(*gc3003), GFP_KERNEL);
|
|
if (!gc3003)
|
|
return -ENOMEM;
|
|
|
|
of_property_read_u32(node, OF_CAMERA_HDR_MODE, &hdr_mode);
|
|
ret = of_property_read_u32(node, RKMODULE_CAMERA_MODULE_INDEX,
|
|
&gc3003->module_index);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_FACING,
|
|
&gc3003->module_facing);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_MODULE_NAME,
|
|
&gc3003->module_name);
|
|
ret |= of_property_read_string(node, RKMODULE_CAMERA_LENS_NAME,
|
|
&gc3003->len_name);
|
|
if (ret) {
|
|
dev_err(dev, "could not get module information!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gc3003->is_thunderboot = IS_ENABLED(CONFIG_VIDEO_ROCKCHIP_THUNDER_BOOT_ISP);
|
|
|
|
gc3003->client = client;
|
|
gc3003->cfg_num = ARRAY_SIZE(supported_modes);
|
|
for (i = 0; i < gc3003->cfg_num; i++) {
|
|
if (hdr_mode == supported_modes[i].hdr_mode) {
|
|
gc3003->cur_mode = &supported_modes[i];
|
|
break;
|
|
}
|
|
}
|
|
if (i == gc3003->cfg_num)
|
|
gc3003->cur_mode = &supported_modes[0];
|
|
|
|
gc3003->xvclk = devm_clk_get(dev, "xvclk");
|
|
if (IS_ERR(gc3003->xvclk)) {
|
|
dev_err(dev, "Failed to get xvclk\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gc3003->pwren_gpio = devm_gpiod_get(dev, "pwren", GPIOD_ASIS);
|
|
if (IS_ERR(gc3003->pwren_gpio))
|
|
dev_warn(dev, "Failed to get pwren-gpios\n");
|
|
|
|
gc3003->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
|
|
if (IS_ERR(gc3003->reset_gpio))
|
|
dev_warn(dev, "Failed to get reset-gpios\n");
|
|
|
|
gc3003->pwdn_gpio = devm_gpiod_get(dev, "pwdn", GPIOD_ASIS);
|
|
if (IS_ERR(gc3003->pwdn_gpio))
|
|
dev_warn(dev, "Failed to get pwdn-gpios\n");
|
|
|
|
gc3003->pinctrl = devm_pinctrl_get(dev);
|
|
if (!IS_ERR(gc3003->pinctrl)) {
|
|
gc3003->pins_default =
|
|
pinctrl_lookup_state(gc3003->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_DEFAULT);
|
|
if (IS_ERR(gc3003->pins_default))
|
|
dev_err(dev, "could not get default pinstate\n");
|
|
|
|
gc3003->pins_sleep =
|
|
pinctrl_lookup_state(gc3003->pinctrl,
|
|
OF_CAMERA_PINCTRL_STATE_SLEEP);
|
|
if (IS_ERR(gc3003->pins_sleep))
|
|
dev_err(dev, "could not get sleep pinstate\n");
|
|
} else {
|
|
dev_err(dev, "no pinctrl\n");
|
|
}
|
|
|
|
ret = gc3003_configure_regulators(gc3003);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to get power regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&gc3003->mutex);
|
|
|
|
sd = &gc3003->subdev;
|
|
v4l2_i2c_subdev_init(sd, client, &gc3003_subdev_ops);
|
|
ret = gc3003_initialize_controls(gc3003);
|
|
if (ret)
|
|
goto err_destroy_mutex;
|
|
|
|
ret = __gc3003_power_on(gc3003);
|
|
if (ret)
|
|
goto err_free_handler;
|
|
|
|
usleep_range(3000, 4000);
|
|
|
|
ret = gc3003_check_sensor_id(gc3003, client);
|
|
if (ret)
|
|
goto err_power_off;
|
|
|
|
#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
|
|
sd->internal_ops = &gc3003_internal_ops;
|
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
|
|
V4L2_SUBDEV_FL_HAS_EVENTS;
|
|
#endif
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
gc3003->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
ret = media_entity_pads_init(&sd->entity, 1, &gc3003->pad);
|
|
if (ret < 0)
|
|
goto err_power_off;
|
|
#endif
|
|
|
|
memset(facing, 0, sizeof(facing));
|
|
if (strcmp(gc3003->module_facing, "back") == 0)
|
|
facing[0] = 'b';
|
|
else
|
|
facing[0] = 'f';
|
|
|
|
snprintf(sd->name, sizeof(sd->name), "m%02d_%s_%s %s",
|
|
gc3003->module_index, facing,
|
|
GC3003_NAME, dev_name(sd->dev));
|
|
ret = v4l2_async_register_subdev_sensor(sd);
|
|
if (ret) {
|
|
dev_err(dev, "v4l2 async register subdev failed\n");
|
|
goto err_clean_entity;
|
|
}
|
|
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
if (gc3003->is_thunderboot)
|
|
pm_runtime_get_sync(dev);
|
|
else
|
|
pm_runtime_idle(dev);
|
|
|
|
return 0;
|
|
|
|
err_clean_entity:
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
err_power_off:
|
|
__gc3003_power_off(gc3003);
|
|
err_free_handler:
|
|
v4l2_ctrl_handler_free(&gc3003->ctrl_handler);
|
|
err_destroy_mutex:
|
|
mutex_destroy(&gc3003->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void gc3003_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct gc3003 *gc3003 = to_gc3003(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
#if defined(CONFIG_MEDIA_CONTROLLER)
|
|
media_entity_cleanup(&sd->entity);
|
|
#endif
|
|
v4l2_ctrl_handler_free(&gc3003->ctrl_handler);
|
|
mutex_destroy(&gc3003->mutex);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
if (!pm_runtime_status_suspended(&client->dev))
|
|
__gc3003_power_off(gc3003);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_OF)
|
|
static const struct of_device_id gc3003_of_match[] = {
|
|
{ .compatible = "galaxycore,gc3003" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gc3003_of_match);
|
|
#endif
|
|
|
|
static const struct i2c_device_id gc3003_match_id[] = {
|
|
{ "galaxycore,gc3003", 0 },
|
|
{ },
|
|
};
|
|
|
|
static struct i2c_driver gc3003_i2c_driver = {
|
|
.driver = {
|
|
.name = GC3003_NAME,
|
|
.pm = &gc3003_pm_ops,
|
|
.of_match_table = of_match_ptr(gc3003_of_match),
|
|
},
|
|
.probe = &gc3003_probe,
|
|
.remove = &gc3003_remove,
|
|
.id_table = gc3003_match_id,
|
|
};
|
|
|
|
static int __init sensor_mod_init(void)
|
|
{
|
|
return i2c_add_driver(&gc3003_i2c_driver);
|
|
}
|
|
|
|
static void __exit sensor_mod_exit(void)
|
|
{
|
|
i2c_del_driver(&gc3003_i2c_driver);
|
|
}
|
|
|
|
#if defined(CONFIG_VIDEO_ROCKCHIP_THUNDER_BOOT_ISP) && !defined(CONFIG_INITCALL_ASYNC)
|
|
subsys_initcall(sensor_mod_init);
|
|
#else
|
|
device_initcall_sync(sensor_mod_init);
|
|
#endif
|
|
module_exit(sensor_mod_exit);
|
|
|
|
MODULE_DESCRIPTION("galaxycore gc3003 sensor driver");
|
|
MODULE_LICENSE("GPL");
|