2477 lines
56 KiB
C
2477 lines
56 KiB
C
/* drivers/input/touchscreen/gt1x_generic.c
|
|
*
|
|
* 2010 - 2014 Goodix Technology.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be a reference
|
|
* to you, when you are integrating the GOODiX's CTP IC into your system,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* Version: 1.4
|
|
* Release Date: 2015/07/10
|
|
*/
|
|
|
|
/*#include "gt1x_tpd_custom.h"*/
|
|
#include "gt1x.h"
|
|
#include "gt1x_generic.h"
|
|
#include "gt1x_cfg.h"
|
|
#if GTP_PROXIMITY && defined(PLATFORM_MTK)
|
|
#include <linux/hwmsensor.h>
|
|
#include <linux/hwmsen_dev.h>
|
|
#include <linux/sensors_io.h>
|
|
#endif
|
|
#include <linux/input/mt.h>
|
|
|
|
/*******************GLOBAL VARIABLE*********************/
|
|
struct i2c_client *gt1x_i2c_client;
|
|
static struct workqueue_struct *gt1x_workqueue;
|
|
|
|
u8 gt1x_config[GTP_CONFIG_MAX_LENGTH] = { 0 };
|
|
u32 gt1x_cfg_length = GTP_CONFIG_MAX_LENGTH;
|
|
|
|
CHIP_TYPE_T gt1x_chip_type = CHIP_TYPE_NONE;
|
|
struct gt1x_version_info gt1x_version = {
|
|
.product_id = {0},
|
|
.patch_id = 0,
|
|
.mask_id = 0,
|
|
.sensor_id = 0,
|
|
.match_opt = 0
|
|
};
|
|
|
|
#ifndef TPD_HAVE_BUTTON
|
|
#define TPD_HAVE_BUTTON 0
|
|
#endif
|
|
|
|
#if GTP_HAVE_TOUCH_KEY
|
|
const u16 gt1x_touch_key_array[] = GTP_KEY_TAB;
|
|
#elif TPD_HAVE_BUTTON
|
|
struct key_map_t {
|
|
int x;
|
|
int y;
|
|
};
|
|
static struct key_map_t tpd_virtual_key_array[] = TPD_KEY_MAP_ARRAY;
|
|
#endif
|
|
|
|
#if GTP_WITH_STYLUS && GTP_HAVE_STYLUS_KEY
|
|
static const u16 gt1x_stylus_key_array[] = GTP_STYLUS_KEY_TAB;
|
|
#endif
|
|
|
|
#define GOODIX_SYSFS_DIR "goodix"
|
|
static struct kobject *sysfs_rootdir;
|
|
|
|
volatile int gt1x_rawdiff_mode;
|
|
u8 gt1x_wakeup_level;
|
|
u8 gt1x_init_failed;
|
|
u8 gt1x_int_type;
|
|
u32 gt1x_abs_x_max;
|
|
u32 gt1x_abs_y_max;
|
|
int gt1x_halt;
|
|
bool gt1x_ics_slot_report;
|
|
bool gt1x_keep_otp_config;
|
|
static bool gtp_is_gt911;
|
|
|
|
#if GTP_DEBUG_NODE
|
|
static ssize_t gt1x_debug_read_proc(struct file *, char __user *, size_t, loff_t *);
|
|
static ssize_t gt1x_debug_write_proc(struct file *, const char __user *, size_t, loff_t *);
|
|
|
|
static struct proc_dir_entry *gt1x_debug_proc_entry;
|
|
static const struct file_operations gt1x_debug_fops = {
|
|
.owner = THIS_MODULE,
|
|
.read = gt1x_debug_read_proc,
|
|
.write = gt1x_debug_write_proc,
|
|
};
|
|
|
|
static s32 gt1x_init_debug_node(void)
|
|
{
|
|
gt1x_debug_proc_entry = proc_create(GT1X_DEBUG_PROC_FILE, 0660, NULL, >1x_debug_fops);
|
|
if (gt1x_debug_proc_entry == NULL) {
|
|
GTP_ERROR("Create proc entry /proc/%s FAILED!", GT1X_DEBUG_PROC_FILE);
|
|
return -1;
|
|
}
|
|
GTP_INFO("Created proc entry /proc/%s.", GT1X_DEBUG_PROC_FILE);
|
|
return 0;
|
|
}
|
|
|
|
static void gt1x_deinit_debug_node(void)
|
|
{
|
|
if (gt1x_debug_proc_entry != NULL) {
|
|
remove_proc_entry(GT1X_DEBUG_PROC_FILE, NULL);
|
|
}
|
|
}
|
|
|
|
static ssize_t gt1x_debug_read_proc(struct file *file, char __user *page, size_t size, loff_t *ppos)
|
|
{
|
|
char *ptr = page;
|
|
char temp_data[GTP_CONFIG_MAX_LENGTH] = { 0 };
|
|
int i;
|
|
|
|
if (*ppos) {
|
|
return 0;
|
|
}
|
|
|
|
ptr += sprintf(ptr, "==== GT1X default config setting in driver====\n");
|
|
|
|
for (i = 0; i < GTP_CONFIG_MAX_LENGTH; i++) {
|
|
ptr += sprintf(ptr, "0x%02X,", gt1x_config[i]);
|
|
if (i % 10 == 9)
|
|
ptr += sprintf(ptr, "\n");
|
|
}
|
|
|
|
ptr += sprintf(ptr, "\n");
|
|
|
|
ptr += sprintf(ptr, "==== GT1X config read from chip====\n");
|
|
i = gt1x_i2c_read(GTP_REG_CONFIG_DATA, temp_data, GTP_CONFIG_MAX_LENGTH);
|
|
GTP_INFO("I2C TRANSFER: %d", i);
|
|
for (i = 0; i < GTP_CONFIG_MAX_LENGTH; i++) {
|
|
ptr += sprintf(ptr, "0x%02X,", temp_data[i]);
|
|
|
|
if (i % 10 == 9)
|
|
ptr += sprintf(ptr, "\n");
|
|
}
|
|
|
|
ptr += sprintf(ptr, "\n");
|
|
/* Touch PID & VID */
|
|
ptr += sprintf(ptr, "==== GT1X Version Info ====\n");
|
|
|
|
gt1x_i2c_read(GTP_REG_VERSION, temp_data, 12);
|
|
ptr += sprintf(ptr, "ProductID: GT%c%c%c%c\n", temp_data[0], temp_data[1], temp_data[2], temp_data[3]);
|
|
ptr += sprintf(ptr, "PatchID: %02X%02X\n", temp_data[4], temp_data[5]);
|
|
ptr += sprintf(ptr, "MaskID: %02X%02X\n", temp_data[7], temp_data[8]);
|
|
ptr += sprintf(ptr, "SensorID: %02X\n", temp_data[10] & 0x0F);
|
|
|
|
*ppos += ptr - page;
|
|
return (ptr - page);
|
|
}
|
|
|
|
static ssize_t gt1x_debug_write_proc(struct file *file, const char *buffer, size_t count, loff_t *ppos)
|
|
{
|
|
s32 ret = 0;
|
|
u8 buf[GTP_CONFIG_MAX_LENGTH] = { 0 };
|
|
char mode_str[50] = { 0 };
|
|
int mode;
|
|
int cfg_len;
|
|
char arg1[50] = { 0 };
|
|
u8 temp_config[GTP_CONFIG_MAX_LENGTH] = { 0 };
|
|
|
|
GTP_DEBUG("write count %ld\n", (unsigned long)count);
|
|
|
|
if (count > GTP_CONFIG_MAX_LENGTH) {
|
|
GTP_ERROR("Too much data, buffer size: %d, data:%ld", GTP_CONFIG_MAX_LENGTH, (unsigned long)count);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (copy_from_user(buf, buffer, count)) {
|
|
GTP_ERROR("copy from user fail!");
|
|
return -EFAULT;
|
|
}
|
|
/*send config*/
|
|
if (count == gt1x_cfg_length) {
|
|
memcpy(gt1x_config, buf, count);
|
|
ret = gt1x_send_cfg(gt1x_config, gt1x_cfg_length);
|
|
if (ret < 0) {
|
|
GTP_ERROR("send gt1x_config failed.");
|
|
return -EFAULT;
|
|
}
|
|
gt1x_abs_x_max = (gt1x_config[RESOLUTION_LOC + 1] << 8) + gt1x_config[RESOLUTION_LOC];
|
|
gt1x_abs_y_max = (gt1x_config[RESOLUTION_LOC + 3] << 8) + gt1x_config[RESOLUTION_LOC + 2];
|
|
|
|
return count;
|
|
}
|
|
|
|
sscanf(buf, "%s %d", (char *)&mode_str, &mode);
|
|
|
|
/*force clear gt1x_config*/
|
|
if (strcmp(mode_str, "clear_config") == 0) {
|
|
GTP_INFO("Force clear gt1x_config");
|
|
gt1x_send_cmd(GTP_CMD_CLEAR_CFG, 0);
|
|
return count;
|
|
}
|
|
if (strcmp(mode_str, "init") == 0) {
|
|
GTP_INFO("Init panel");
|
|
gt1x_init_panel();
|
|
return count;
|
|
}
|
|
if (strcmp(mode_str, "chip") == 0) {
|
|
GTP_INFO("Get chip type:");
|
|
gt1x_get_chip_type();
|
|
return count;
|
|
}
|
|
if (strcmp(mode_str, "int") == 0) {
|
|
if (mode == 0) {
|
|
GTP_INFO("Disable irq.");
|
|
gt1x_irq_disable();
|
|
} else {
|
|
GTP_INFO("Enable irq.");
|
|
gt1x_irq_enable();
|
|
}
|
|
return count;
|
|
}
|
|
|
|
if (strcmp(mode_str, "poweron") == 0) {
|
|
gt1x_power_switch(1);
|
|
return count;
|
|
}
|
|
|
|
if (strcmp(mode_str, "poweroff") == 0) {
|
|
gt1x_power_switch(0);
|
|
return count;
|
|
}
|
|
|
|
if (strcmp(mode_str, "version") == 0) {
|
|
gt1x_read_version(NULL);
|
|
return count;
|
|
}
|
|
|
|
if (strcmp(mode_str, "reset") == 0) {
|
|
gt1x_irq_disable();
|
|
gt1x_reset_guitar();
|
|
gt1x_irq_enable();
|
|
return count;
|
|
}
|
|
#if GTP_CHARGER_SWITCH
|
|
if (strcmp(mode_str, "charger") == 0) {
|
|
gt1x_charger_config(mode);
|
|
return count;
|
|
}
|
|
#endif
|
|
sscanf(buf, "%s %s", (char *)&mode_str, (char *)&arg1);
|
|
if (strcmp(mode_str, "update") == 0) {
|
|
gt1x_update_firmware(arg1);
|
|
return count;
|
|
}
|
|
#if 0 //close for GKI
|
|
if (strcmp(mode_str, "sendconfig") == 0) {
|
|
cfg_len = gt1x_parse_config(arg1, temp_config);
|
|
if (cfg_len < 0) {
|
|
return -1;
|
|
}
|
|
gt1x_send_cfg(temp_config, gt1x_cfg_length);
|
|
return count;
|
|
}
|
|
#endif
|
|
if (strcmp(mode_str, "debug_gesture") == 0) {
|
|
#if GTP_GESTURE_WAKEUP
|
|
gt1x_gesture_debug(!!mode);
|
|
#endif
|
|
}
|
|
|
|
if (strcmp(mode_str, "force_update") == 0) {
|
|
update_info.force_update = !!mode;
|
|
}
|
|
return gt1x_debug_proc(buf, count);
|
|
}
|
|
#endif
|
|
|
|
static u8 __maybe_unused ascii2hex(u8 a)
|
|
{
|
|
s8 value = 0;
|
|
if (a >= '0' && a <= '9') {
|
|
value = a - '0';
|
|
} else if (a >= 'A' && a <= 'F') {
|
|
value = a - 'A' + 0x0A;
|
|
} else if (a >= 'a' && a <= 'f') {
|
|
value = a - 'a' + 0x0A;
|
|
} else {
|
|
value = 0xff;
|
|
}
|
|
return value;
|
|
}
|
|
|
|
#if 0 //close for GKI
|
|
int gt1x_parse_config(char *filename, u8 *config)
|
|
{
|
|
mm_segment_t old_fs;
|
|
struct file *fp = NULL;
|
|
u8 *buf;
|
|
int i;
|
|
int len;
|
|
int cur_len = -1;
|
|
u8 high, low;
|
|
|
|
old_fs = get_fs();
|
|
set_fs(KERNEL_DS);
|
|
|
|
fp = filp_open(filename, O_RDONLY, 0);
|
|
if (IS_ERR(fp)) {
|
|
GTP_ERROR("Open config file error!(file: %s)", filename);
|
|
goto parse_cfg_fail1;
|
|
}
|
|
len = fp->f_op->llseek(fp, 0, SEEK_END);
|
|
if (len > GTP_CONFIG_MAX_LENGTH * 6 || len < GTP_CONFIG_MAX_LENGTH) {
|
|
GTP_ERROR("Config is invalid!(length: %d)", len);
|
|
goto parse_cfg_fail2;
|
|
}
|
|
buf = kzalloc(len, GFP_KERNEL);
|
|
if (buf == NULL) {
|
|
GTP_ERROR("Allocate memory failed!(size: %d)", len);
|
|
goto parse_cfg_fail2;
|
|
}
|
|
fp->f_op->llseek(fp, 0, SEEK_SET);
|
|
if (fp->f_op->read(fp, (char *)buf, len, &fp->f_pos) != len) {
|
|
GTP_ERROR("Read %d bytes from file failed!", len);
|
|
}
|
|
|
|
GTP_INFO("Parse config file: %s (%d bytes)", filename, len);
|
|
|
|
for (i = 0, cur_len = 0; i < len && cur_len < GTP_CONFIG_MAX_LENGTH;) {
|
|
if (buf[i] == ' ' || buf[i] == '\r' || buf[i] == '\n' || buf[i] == ',') {
|
|
i++;
|
|
continue;
|
|
}
|
|
if (buf[i] == '0' && (buf[i + 1] == 'x' || buf[i + 1] == 'X')) {
|
|
|
|
high = ascii2hex(buf[i + 2]);
|
|
low = ascii2hex(buf[i + 3]);
|
|
|
|
if (high != 0xFF && low != 0xFF) {
|
|
config[cur_len++] = (high << 4) + low;
|
|
i += 4;
|
|
continue;
|
|
}
|
|
}
|
|
GTP_ERROR("Illegal config file!");
|
|
cur_len = -1;
|
|
break;
|
|
}
|
|
|
|
if (cur_len < GTP_CONFIG_MIN_LENGTH || config[cur_len - 1] != 0x01) {
|
|
cur_len = -1;
|
|
} else {
|
|
for (i = 0; i < cur_len; i++) {
|
|
if (i % 10 == 0) {
|
|
printk("\n<<GTP-DBG>>:");
|
|
}
|
|
printk("0x%02x,", config[i]);
|
|
}
|
|
printk("\n");
|
|
}
|
|
|
|
kfree(buf);
|
|
parse_cfg_fail2:
|
|
filp_close(fp, NULL);
|
|
parse_cfg_fail1:
|
|
set_fs(old_fs);
|
|
|
|
return cur_len;
|
|
}
|
|
#endif
|
|
|
|
s32 _do_i2c_read(struct i2c_msg *msgs, u16 addr, u8 *buffer, s32 len)
|
|
{
|
|
s32 ret = -1;
|
|
s32 pos = 0;
|
|
s32 data_length = len;
|
|
s32 transfer_length = 0;
|
|
u8 *data = NULL;
|
|
u16 address = addr;
|
|
|
|
data = kmalloc(IIC_MAX_TRANSFER_SIZE < (len + GTP_ADDR_LENGTH) ? IIC_MAX_TRANSFER_SIZE : (len + GTP_ADDR_LENGTH), GFP_KERNEL);
|
|
if (data == NULL) {
|
|
return ERROR_MEM;
|
|
}
|
|
msgs[1].buf = data;
|
|
|
|
while (pos != data_length) {
|
|
if ((data_length - pos) > IIC_MAX_TRANSFER_SIZE) {
|
|
transfer_length = IIC_MAX_TRANSFER_SIZE;
|
|
} else {
|
|
transfer_length = data_length - pos;
|
|
}
|
|
msgs[0].buf[0] = (address >> 8) & 0xFF;
|
|
msgs[0].buf[1] = address & 0xFF;
|
|
msgs[1].len = transfer_length;
|
|
|
|
ret = i2c_transfer(gt1x_i2c_client->adapter, msgs, 2);
|
|
if (ret != 2) {
|
|
GTP_ERROR("I2c Transfer error! (%d)", ret);
|
|
kfree(data);
|
|
return ERROR_IIC;
|
|
}
|
|
memcpy(&buffer[pos], msgs[1].buf, transfer_length);
|
|
pos += transfer_length;
|
|
address += transfer_length;
|
|
}
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
s32 _do_i2c_write(struct i2c_msg *msg, u16 addr, u8 *buffer, s32 len)
|
|
{
|
|
s32 ret = -1;
|
|
s32 pos = 0;
|
|
s32 data_length = len;
|
|
s32 transfer_length = 0;
|
|
u8 *data = NULL;
|
|
u16 address = addr;
|
|
|
|
data = kmalloc(IIC_MAX_TRANSFER_SIZE < (len + GTP_ADDR_LENGTH) ? IIC_MAX_TRANSFER_SIZE : (len + GTP_ADDR_LENGTH), GFP_KERNEL);
|
|
if (data == NULL) {
|
|
return ERROR_MEM;
|
|
}
|
|
msg->buf = data;
|
|
|
|
while (pos != data_length) {
|
|
if ((data_length - pos) > (IIC_MAX_TRANSFER_SIZE - GTP_ADDR_LENGTH)) {
|
|
transfer_length = IIC_MAX_TRANSFER_SIZE - GTP_ADDR_LENGTH;
|
|
} else {
|
|
transfer_length = data_length - pos;
|
|
}
|
|
|
|
msg->buf[0] = (address >> 8) & 0xFF;
|
|
msg->buf[1] = address & 0xFF;
|
|
msg->len = transfer_length + GTP_ADDR_LENGTH;
|
|
memcpy(&msg->buf[GTP_ADDR_LENGTH], &buffer[pos], transfer_length);
|
|
|
|
ret = i2c_transfer(gt1x_i2c_client->adapter, msg, 1);
|
|
if (ret != 1) {
|
|
GTP_ERROR("I2c transfer error! (%d)", ret);
|
|
kfree(data);
|
|
return ERROR_IIC;
|
|
}
|
|
pos += transfer_length;
|
|
address += transfer_length;
|
|
}
|
|
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
#if !GTP_ESD_PROTECT
|
|
static s32 gt1x_i2c_test(void)
|
|
{
|
|
u8 retry = 0;
|
|
s32 ret = -1;
|
|
u32 hw_info = 0;
|
|
GTP_DEBUG_FUNC();
|
|
|
|
while (retry++ < 3) {
|
|
ret = gt1x_i2c_read(GTP_REG_HW_INFO, (u8 *) &hw_info, sizeof(hw_info));
|
|
if (!ret) {
|
|
GTP_INFO("Hardware Info:%08X", hw_info);
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(10000, 11000);
|
|
GTP_ERROR("Hardware Info:%08X", hw_info);
|
|
GTP_ERROR("I2c failed%d.", retry);
|
|
}
|
|
|
|
return ERROR_RETRY;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* gt1x_i2c_read_dbl_check - read twice and double check
|
|
* @addr: register address
|
|
* @buffer: data buffer
|
|
* @len: bytes to read
|
|
* Return <0: i2c error, 0: ok, 1:fail
|
|
*/
|
|
s32 gt1x_i2c_read_dbl_check(u16 addr, u8 *buffer, s32 len)
|
|
{
|
|
u8 buf[16] = { 0 };
|
|
u8 confirm_buf[16] = { 0 };
|
|
int ret;
|
|
|
|
if (len > 16) {
|
|
GTP_ERROR("i2c_read_dbl_check length %d is too long, exceed %zu", len, sizeof(buf));
|
|
return ERROR;
|
|
}
|
|
|
|
memset(buf, 0xAA, sizeof(buf));
|
|
ret = gt1x_i2c_read(addr, buf, len);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(5000, 6000);
|
|
memset(confirm_buf, 0, sizeof(confirm_buf));
|
|
ret = gt1x_i2c_read(addr, confirm_buf, len);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
if (!memcmp(buf, confirm_buf, len)) {
|
|
memcpy(buffer, confirm_buf, len);
|
|
return 0;
|
|
}
|
|
GTP_ERROR("i2c read 0x%04X, %d bytes, double check failed!", addr, len);
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* gt1x_send_cfg - Send gt1x_config Function.
|
|
* @config: pointer of the configuration array.
|
|
* @cfg_len: length of configuration array.
|
|
* Return 0--success,non-0--fail.
|
|
*/
|
|
s32 gt1x_send_cfg(u8 *config, int cfg_len)
|
|
{
|
|
#if GTP_DRIVER_SEND_CFG
|
|
static DEFINE_MUTEX(mutex_cfg);
|
|
int i;
|
|
s32 ret = 0;
|
|
s32 retry = 0;
|
|
u16 checksum = 0;
|
|
|
|
if (update_info.status) {
|
|
GTP_DEBUG("Ignore cfg during fw update.");
|
|
return -1;
|
|
}
|
|
mutex_lock(&mutex_cfg);
|
|
GTP_DEBUG("Driver send config, length:%d", cfg_len);
|
|
for (i = 0; i < cfg_len - 3; i += 2) {
|
|
checksum += (config[i] << 8) + config[i + 1];
|
|
}
|
|
if (!checksum) {
|
|
GTP_ERROR("Invalid config, all of the bytes is zero!");
|
|
mutex_unlock(&mutex_cfg);
|
|
return -1;
|
|
}
|
|
checksum = 0 - checksum;
|
|
GTP_DEBUG("Config checksum: 0x%04X", checksum);
|
|
config[cfg_len - 3] = (checksum >> 8) & 0xFF;
|
|
config[cfg_len - 2] = checksum & 0xFF;
|
|
config[cfg_len - 1] = 0x01;
|
|
|
|
while (retry++ < 5) {
|
|
ret = gt1x_i2c_write(GTP_REG_CONFIG_DATA, config, cfg_len);
|
|
if (!ret) {
|
|
msleep(200); /* at least 200ms, wait for storing config into flash. */
|
|
mutex_unlock(&mutex_cfg);
|
|
GTP_DEBUG("Send config successfully!");
|
|
return 0;
|
|
}
|
|
}
|
|
GTP_ERROR("Send config failed!");
|
|
mutex_unlock(&mutex_cfg);
|
|
return ret;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gt1x_init_panel - Prepare config data for touch ic, don't call this function
|
|
* after initialization.
|
|
*
|
|
* Return 0--success,<0 --fail.
|
|
*/
|
|
s32 gt1x_init_panel(void)
|
|
{
|
|
s32 ret = 0;
|
|
u8 cfg_len = 0;
|
|
|
|
#if GTP_DRIVER_SEND_CFG
|
|
u8 sensor_id = 0;
|
|
|
|
const u8 cfg_grp0[] = GTP_CFG_GROUP0;
|
|
const u8 cfg_grp1[] = GTP_CFG_GROUP1;
|
|
const u8 cfg_grp2[] = GTP_CFG_GROUP2;
|
|
const u8 cfg_grp3[] = GTP_CFG_GROUP3;
|
|
const u8 cfg_grp4[] = GTP_CFG_GROUP4;
|
|
const u8 cfg_grp5[] = GTP_CFG_GROUP5;
|
|
const u8 *cfgs[] = {
|
|
cfg_grp0, cfg_grp1, cfg_grp2,
|
|
cfg_grp3, cfg_grp4, cfg_grp5
|
|
};
|
|
u8 cfg_lens[] = {
|
|
CFG_GROUP_LEN(cfg_grp0),
|
|
CFG_GROUP_LEN(cfg_grp1),
|
|
CFG_GROUP_LEN(cfg_grp2),
|
|
CFG_GROUP_LEN(cfg_grp3),
|
|
CFG_GROUP_LEN(cfg_grp4),
|
|
CFG_GROUP_LEN(cfg_grp5)
|
|
};
|
|
|
|
if (gt1x_gt5688) {
|
|
cfgs[0] = gtp_dat_5688;
|
|
cfg_lens[0] = CFG_GROUP_LEN(gtp_dat_5688);
|
|
}
|
|
|
|
GTP_DEBUG("Config groups length:%d,%d,%d,%d,%d,%d", cfg_lens[0], cfg_lens[1], cfg_lens[2], cfg_lens[3], cfg_lens[4], cfg_lens[5]);
|
|
|
|
sensor_id = gt1x_version.sensor_id;
|
|
if (sensor_id >= 6 || cfg_lens[sensor_id] < GTP_CONFIG_MIN_LENGTH || cfg_lens[sensor_id] > GTP_CONFIG_MAX_LENGTH) {
|
|
sensor_id = 0;
|
|
gt1x_version.sensor_id = 0;
|
|
}
|
|
|
|
cfg_len = cfg_lens[sensor_id];
|
|
|
|
GTP_INFO("Config group%d used, length:%d", sensor_id, cfg_len);
|
|
|
|
if (cfg_len < GTP_CONFIG_MIN_LENGTH || cfg_len > GTP_CONFIG_MAX_LENGTH) {
|
|
GTP_ERROR("Config group%d is INVALID! You need to check you header file CFG_GROUP section!", sensor_id + 1);
|
|
return -1;
|
|
}
|
|
|
|
memset(gt1x_config, 0, sizeof(gt1x_config));
|
|
memcpy(gt1x_config, cfgs[sensor_id], cfg_len);
|
|
|
|
/* clear the flag, avoid failure when send the_config of driver. */
|
|
gt1x_config[0] &= 0x7F;
|
|
|
|
#if GTP_CUSTOM_CFG
|
|
gt1x_config[RESOLUTION_LOC] = (u8) GTP_MAX_WIDTH;
|
|
gt1x_config[RESOLUTION_LOC + 1] = (u8) (GTP_MAX_WIDTH >> 8);
|
|
gt1x_config[RESOLUTION_LOC + 2] = (u8) GTP_MAX_HEIGHT;
|
|
gt1x_config[RESOLUTION_LOC + 3] = (u8) (GTP_MAX_HEIGHT >> 8);
|
|
|
|
if (GTP_INT_TRIGGER == 0) { /* RISING */
|
|
gt1x_config[TRIGGER_LOC] &= 0xfe;
|
|
} else if (GTP_INT_TRIGGER == 1) { /* FALLING */
|
|
gt1x_config[TRIGGER_LOC] |= 0x01;
|
|
}
|
|
set_reg_bit(gt1x_config[MODULE_SWITCH3_LOC], 5, !gt1x_wakeup_level);
|
|
#endif /* END GTP_CUSTOM_CFG */
|
|
#endif /* END GTP_DRIVER_SEND_CFG */
|
|
|
|
if (gt1x_keep_otp_config) {
|
|
u16 cfg_reg = gtp_is_gt911 ? 0x8047 : GTP_REG_CONFIG_DATA;
|
|
|
|
cfg_len = GTP_CONFIG_MAX_LENGTH;
|
|
ret = gt1x_i2c_read(cfg_reg, gt1x_config, cfg_len);
|
|
if (ret < 0) {
|
|
GTP_ERROR("Failed to read CONFIG data, sensor_id %d", gt1x_version.sensor_id);
|
|
return ret;
|
|
} else if (!gtp_is_gt911) {
|
|
int i;
|
|
u16 checksum = 0;
|
|
for (i = 0; i < cfg_len - 4; i += 2) {
|
|
checksum += (gt1x_config[i] << 8) + gt1x_config[i + 1];
|
|
}
|
|
checksum = 0 - checksum;
|
|
if (!checksum || checksum != ((gt1x_config[i] << 8) + gt1x_config[i + 1])) {
|
|
GTP_ERROR("Invalid config data, checksum %04x", checksum);
|
|
}
|
|
}
|
|
}
|
|
|
|
GTP_DEBUG_FUNC();
|
|
/* match resolution when gt1x_abs_x_max & gt1x_abs_y_max have been set already */
|
|
if ((gt1x_abs_x_max == 0) && (gt1x_abs_y_max == 0)) {
|
|
gt1x_abs_x_max = (gt1x_config[RESOLUTION_LOC + 1] << 8) + gt1x_config[RESOLUTION_LOC];
|
|
gt1x_abs_y_max = (gt1x_config[RESOLUTION_LOC + 3] << 8) + gt1x_config[RESOLUTION_LOC + 2];
|
|
gt1x_int_type = (gt1x_config[TRIGGER_LOC]) & 0x03;
|
|
gt1x_wakeup_level = !(gt1x_config[MODULE_SWITCH3_LOC] & 0x20);
|
|
} else {
|
|
gt1x_config[RESOLUTION_LOC] = (u8) gt1x_abs_x_max;
|
|
gt1x_config[RESOLUTION_LOC + 1] = (u8) (gt1x_abs_x_max >> 8);
|
|
gt1x_config[RESOLUTION_LOC + 2] = (u8) gt1x_abs_y_max;
|
|
gt1x_config[RESOLUTION_LOC + 3] = (u8) (gt1x_abs_y_max >> 8);
|
|
set_reg_bit(gt1x_config[MODULE_SWITCH3_LOC], 5, !gt1x_wakeup_level);
|
|
gt1x_config[TRIGGER_LOC] = (gt1x_config[TRIGGER_LOC] & 0xFC) | gt1x_int_type;
|
|
}
|
|
|
|
GTP_INFO("X_MAX=%d,Y_MAX=%d,TRIGGER=0x%02x,WAKEUP_LEVEL=%d", gt1x_abs_x_max, gt1x_abs_y_max, gt1x_int_type, gt1x_wakeup_level);
|
|
|
|
gt1x_cfg_length = cfg_len;
|
|
if (!gt1x_keep_otp_config) {
|
|
ret = gt1x_send_cfg(gt1x_config, gt1x_cfg_length);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
void gt1x_select_addr(void)
|
|
{
|
|
if (gpio_is_valid(gt1x_rst_gpio))
|
|
GTP_GPIO_OUTPUT(GTP_RST_PORT, 0);
|
|
GTP_GPIO_OUTPUT(GTP_INT_PORT, gt1x_i2c_client->addr == 0x14);
|
|
usleep_range(2000, 3000);
|
|
if (gpio_is_valid(gt1x_rst_gpio))
|
|
GTP_GPIO_OUTPUT(GTP_RST_PORT, 1);
|
|
usleep_range(2000, 3000);
|
|
}
|
|
|
|
static s32 gt1x_set_reset_status(void)
|
|
{
|
|
/* 0x8040 ~ 0x8043 */
|
|
u8 value[] = {0xAA, 0x00, 0x56, 0xAA};
|
|
int ret;
|
|
|
|
GTP_DEBUG("Set reset status.");
|
|
ret = gt1x_i2c_write(GTP_REG_CMD + 1, &value[1], 3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return gt1x_i2c_write(GTP_REG_CMD, value, 1);
|
|
}
|
|
|
|
#if GTP_INCELL_PANEL
|
|
int gt1x_write_and_readback(u16 addr, u8 *buffer, s32 len)
|
|
{
|
|
int ret;
|
|
u8 d[len];
|
|
|
|
ret = gt1x_i2c_write(addr, buffer, len);
|
|
if (ret < 0)
|
|
return -1;
|
|
|
|
ret = gt1x_i2c_read(addr, d, len);
|
|
if (ret < 0 || memcmp(buffer, d, len))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int gt1x_incell_reset(void)
|
|
{
|
|
#define RST_RETRY 5
|
|
int ret, retry = RST_RETRY;
|
|
u8 d[2];
|
|
|
|
do {
|
|
/* select i2c address */
|
|
gt1x_select_addr();
|
|
|
|
/* test i2c */
|
|
ret = gt1x_i2c_read(0x4220, d, 1);
|
|
|
|
} while (--retry && ret < 0);
|
|
|
|
if (ret < 0) {
|
|
return -1;
|
|
}
|
|
|
|
/* Stop cpu of the touch ic */
|
|
retry = RST_RETRY;
|
|
do {
|
|
d[0] = 0x0C;
|
|
ret = gt1x_write_and_readback(0x4180, d, 1);
|
|
|
|
} while (--retry && ret < 0);
|
|
|
|
if (ret < 0) {
|
|
GTP_ERROR("Hold error.");
|
|
return -1;
|
|
}
|
|
|
|
/* skip sensor id check. [start] */
|
|
retry = RST_RETRY;
|
|
do {
|
|
d[0] = 0x00;
|
|
ret = gt1x_write_and_readback(0x4305, d, 1);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
d[0] = 0x2B;
|
|
d[1] = 0x24;
|
|
ret = gt1x_write_and_readback(0x42c4, d, 2);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
d[0] = 0xE1;
|
|
d[1] = 0xD3;
|
|
ret = gt1x_write_and_readback(0x42e4, d, 2);
|
|
if (ret < 0)
|
|
continue;
|
|
d[0] = 0x01;
|
|
ret = gt1x_write_and_readback(0x4305, d, 1);
|
|
if (ret < 0)
|
|
continue;
|
|
else
|
|
break;
|
|
} while (--retry);
|
|
|
|
if (!retry)
|
|
return -1;
|
|
/* skip sensor id check. [end] */
|
|
|
|
/* release hold of cpu */
|
|
retry = RST_RETRY;
|
|
do {
|
|
d[0] = 0x00;
|
|
ret = gt1x_write_and_readback(0x4180, d, 1);
|
|
|
|
} while (--retry && ret < 0);
|
|
|
|
if (ret < 0)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
s32 gt1x_reset_guitar(void)
|
|
{
|
|
int ret;
|
|
|
|
GTP_INFO("GTP RESET!");
|
|
|
|
#if GTP_INCELL_PANEL
|
|
ret = gt1x_incell_reset();
|
|
if (ret < 0)
|
|
return ret;
|
|
#else
|
|
gt1x_select_addr();
|
|
usleep_range(8000, 9000); /* must >= 6ms */
|
|
#endif
|
|
|
|
/* int synchronization */
|
|
GTP_GPIO_OUTPUT(GTP_INT_PORT, 0);
|
|
msleep(50);
|
|
GTP_GPIO_AS_INT(GTP_INT_PORT);
|
|
|
|
/* this operation is necessary even when the esd check
|
|
fucntion dose not turn on */
|
|
ret = gt1x_set_reset_status();
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* gt1x_read_version - Read gt1x version info.
|
|
* @ver_info: address to store version info
|
|
* Return 0-succeed.
|
|
*/
|
|
s32 gt1x_read_version(struct gt1x_version_info *ver_info)
|
|
{
|
|
s32 ret = -1;
|
|
u8 buf[12] = { 0 };
|
|
u32 mask_id = 0;
|
|
u32 patch_id = 0;
|
|
u8 product_id[5] = { 0 };
|
|
u8 sensor_id = 0;
|
|
u8 match_opt = 0;
|
|
unsigned int i, retry = 3;
|
|
u8 checksum = 0;
|
|
|
|
GTP_DEBUG_FUNC();
|
|
|
|
while (retry--) {
|
|
ret = gt1x_i2c_read_dbl_check(GTP_REG_VERSION, buf, sizeof(buf));
|
|
if (!ret) {
|
|
checksum = 0;
|
|
|
|
for (i = 0; i < sizeof(buf); i++) {
|
|
checksum += buf[i];
|
|
}
|
|
|
|
if (checksum == 0 && /* first 3 bytes must be number or char */
|
|
IS_NUM_OR_CHAR(buf[0]) && IS_NUM_OR_CHAR(buf[1]) && IS_NUM_OR_CHAR(buf[2]) && buf[10] != 0xFF) { /*sensor id == 0xFF, retry */
|
|
break;
|
|
} else {
|
|
GTP_ERROR("Read version failed!(checksum error)");
|
|
}
|
|
} else {
|
|
GTP_ERROR("Read version failed!");
|
|
}
|
|
GTP_DEBUG("Read version : %d", retry);
|
|
msleep(100);
|
|
}
|
|
|
|
if (retry <= 0) {
|
|
if (ver_info)
|
|
ver_info->sensor_id = 0;
|
|
return -1;
|
|
}
|
|
|
|
mask_id = (u32) ((buf[7] << 16) | (buf[8] << 8) | buf[9]);
|
|
patch_id = (u32) ((buf[4] << 16) | (buf[5] << 8) | buf[6]);
|
|
memcpy(product_id, buf, 4);
|
|
sensor_id = buf[10] & 0x0F;
|
|
match_opt = (buf[10] >> 4) & 0x0F;
|
|
|
|
gtp_is_gt911 = !strncmp(product_id, "911", 3);
|
|
GTP_INFO("IC VERSION:GT%s_%06X(Patch)_%04X(Mask)_%02X(SensorID)", product_id, patch_id, mask_id >> 8, sensor_id);
|
|
|
|
if (ver_info != NULL) {
|
|
ver_info->mask_id = mask_id;
|
|
ver_info->patch_id = patch_id;
|
|
memcpy(ver_info->product_id, product_id, 5);
|
|
ver_info->sensor_id = sensor_id;
|
|
ver_info->match_opt = match_opt;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gt1x_get_chip_type - get chip type .
|
|
*
|
|
* different chip synchronize in different way,
|
|
*/
|
|
s32 gt1x_get_chip_type(void)
|
|
{
|
|
u8 opr_buf[4] = { 0x00 };
|
|
u8 gt1x_data[] = { 0x02, 0x08, 0x90, 0x00 };
|
|
u8 gt9l_data[] = { 0x03, 0x10, 0x90, 0x00 };
|
|
s32 ret = -1;
|
|
|
|
/* chip type already exist */
|
|
if (gt1x_chip_type != CHIP_TYPE_NONE) {
|
|
return 0;
|
|
}
|
|
|
|
/* read hardware */
|
|
ret = gt1x_i2c_read_dbl_check(GTP_REG_HW_INFO, opr_buf, sizeof(opr_buf));
|
|
if (ret) {
|
|
GTP_ERROR("I2c communication error.");
|
|
return -1;
|
|
}
|
|
|
|
/* find chip type */
|
|
if (!memcmp(opr_buf, gt1x_data, sizeof(gt1x_data))) {
|
|
gt1x_chip_type = CHIP_TYPE_GT1X;
|
|
} else if (!memcmp(opr_buf, gt9l_data, sizeof(gt9l_data))) {
|
|
gt1x_chip_type = CHIP_TYPE_GT2X;
|
|
}
|
|
|
|
if (gt1x_chip_type != CHIP_TYPE_NONE) {
|
|
GTP_INFO("Chip Type: %s", (gt1x_chip_type == CHIP_TYPE_GT1X) ? "GT1X" : "GT2X");
|
|
return 0;
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gt1x_enter_sleep - Eter sleep function.
|
|
*
|
|
* Returns 0--success,non-0--fail.
|
|
*/
|
|
static s32 gt1x_enter_sleep(void)
|
|
{
|
|
s32 retry = 0;
|
|
|
|
#if GTP_POWER_CTRL_SLEEP
|
|
if (!gt1x_power_switch(SWITCH_OFF)) {
|
|
GTP_GPIO_OUTPUT(GTP_RST_PORT, 0);
|
|
GTP_INFO("Enter sleep mode by poweroff");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
if (gt1x_wakeup_level == 1) { /* high level wakeup */
|
|
GTP_GPIO_OUTPUT(GTP_INT_PORT, 0);
|
|
}
|
|
usleep_range(5000, 6000);
|
|
|
|
while (retry++ < 3) {
|
|
if (!gt1x_send_cmd(GTP_CMD_SLEEP, 0)) {
|
|
GTP_INFO("Enter sleep mode!");
|
|
return 0;
|
|
}
|
|
usleep_range(10000, 11000);
|
|
}
|
|
|
|
GTP_ERROR("Enter sleep mode failed.");
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* gt1x_wakeup_sleep - wakeup from sleep mode Function.
|
|
*
|
|
* Return: 0--success,non-0--fail.
|
|
*/
|
|
static s32 gt1x_wakeup_sleep(void)
|
|
{
|
|
u8 retry = 0;
|
|
s32 ret = -1;
|
|
int flag = 0;
|
|
|
|
GTP_DEBUG("Wake up begin.");
|
|
gt1x_irq_disable();
|
|
|
|
#if GTP_POWER_CTRL_SLEEP /* power manager unit control the procedure */
|
|
if (!gt1x_power_switch(SWITCH_ON)) {
|
|
gt1x_power_reset();
|
|
GTP_INFO("Wakeup by poweron");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* gesture wakeup & int port wakeup */
|
|
while (retry++ < 2) {
|
|
#if GTP_GESTURE_WAKEUP
|
|
if (gesture_enabled) {
|
|
gesture_doze_status = DOZE_DISABLED;
|
|
ret = gt1x_reset_guitar();
|
|
if (!ret) {
|
|
break;
|
|
}
|
|
} else
|
|
#endif
|
|
{
|
|
/* wake up through int port */
|
|
GTP_GPIO_OUTPUT(GTP_INT_PORT, gt1x_wakeup_level);
|
|
usleep_range(5000, 6000);
|
|
|
|
/* Synchronize int IO */
|
|
GTP_GPIO_OUTPUT(GTP_INT_PORT, 0);
|
|
msleep(50);
|
|
GTP_GPIO_AS_INT(GTP_INT_PORT);
|
|
flag = 1;
|
|
|
|
#if GTP_ESD_PROTECT
|
|
ret = gt1x_set_reset_status();
|
|
#else
|
|
ret = gt1x_i2c_test();
|
|
#endif
|
|
if (!ret)
|
|
break;
|
|
} /* end int wakeup */
|
|
}
|
|
|
|
if (ret < 0 && flag) { /* int wakeup failed , try waking up by reset */
|
|
while (retry--) {
|
|
ret = gt1x_reset_guitar();
|
|
if (!ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret) {
|
|
GTP_ERROR("Wake up sleep failed.");
|
|
return -1;
|
|
} else {
|
|
GTP_INFO("Wake up end.");
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gt1x_send_cmd - seng cmd
|
|
* must write data & checksum first
|
|
* byte content
|
|
* 0 cmd
|
|
* 1 data
|
|
* 2 checksum
|
|
* Returns 0 - succeed,non-0 - failed
|
|
*/
|
|
s32 gt1x_send_cmd(u8 cmd, u8 data)
|
|
{
|
|
s32 ret;
|
|
static DEFINE_MUTEX(cmd_mutex);
|
|
u8 buffer[3] = { cmd, data, 0 };
|
|
|
|
mutex_lock(&cmd_mutex);
|
|
buffer[2] = (u8) ((0 - cmd - data) & 0xFF);
|
|
ret = gt1x_i2c_write(GTP_REG_CMD + 1, &buffer[1], 2);
|
|
ret |= gt1x_i2c_write(GTP_REG_CMD, &buffer[0], 1);
|
|
msleep(50);
|
|
mutex_unlock(&cmd_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void gt1x_power_reset(void)
|
|
{
|
|
static int rst_flag;
|
|
s32 i = 0;
|
|
|
|
if (rst_flag || update_info.status) {
|
|
return;
|
|
}
|
|
GTP_INFO("force_reset_guitar");
|
|
rst_flag = 1;
|
|
gt1x_irq_disable();
|
|
gt1x_power_switch(SWITCH_OFF);
|
|
msleep(30);
|
|
gt1x_power_switch(SWITCH_ON);
|
|
msleep(30);
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (gt1x_reset_guitar()) {
|
|
continue;
|
|
}
|
|
if (gt1x_send_cfg(gt1x_config, gt1x_cfg_length)) {
|
|
msleep(500);
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
gt1x_irq_enable();
|
|
rst_flag = 0;
|
|
}
|
|
|
|
s32 gt1x_request_event_handler(void)
|
|
{
|
|
s32 ret = -1;
|
|
u8 rqst_data = 0;
|
|
|
|
ret = gt1x_i2c_read(GTP_REG_RQST, &rqst_data, 1);
|
|
if (ret) {
|
|
GTP_ERROR("I2C transfer error. errno:%d", ret);
|
|
return -1;
|
|
}
|
|
GTP_DEBUG("Request state:0x%02x.", rqst_data);
|
|
switch (rqst_data & 0x0F) {
|
|
case GTP_RQST_CONFIG:
|
|
GTP_INFO("Request Config.");
|
|
ret = gt1x_send_cfg(gt1x_config, gt1x_cfg_length);
|
|
if (ret) {
|
|
GTP_ERROR("Send gt1x_config error.");
|
|
} else {
|
|
GTP_INFO("Send gt1x_config success.");
|
|
rqst_data = GTP_RQST_RESPONDED;
|
|
gt1x_i2c_write(GTP_REG_RQST, &rqst_data, 1);
|
|
}
|
|
break;
|
|
case GTP_RQST_RESET:
|
|
GTP_INFO("Request Reset.");
|
|
gt1x_reset_guitar();
|
|
rqst_data = GTP_RQST_RESPONDED;
|
|
gt1x_i2c_write(GTP_REG_RQST, &rqst_data, 1);
|
|
break;
|
|
case GTP_RQST_BAK_REF:
|
|
GTP_INFO("Request Ref.");
|
|
break;
|
|
case GTP_RQST_MAIN_CLOCK:
|
|
GTP_INFO("Request main clock.");
|
|
break;
|
|
#if GTP_HOTKNOT
|
|
case GTP_RQST_HOTKNOT_CODE:
|
|
GTP_INFO("Request HotKnot Code.");
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* gt1x_touch_event_handler - handle touch event
|
|
* (pen event, key event, finger touch envent)
|
|
* @data:
|
|
* Return <0: failed, 0: succeed
|
|
*/
|
|
s32 gt1x_touch_event_handler(u8 *data, struct input_dev *dev, struct input_dev *pen_dev)
|
|
{
|
|
u8 touch_data[1 + 8 * GTP_MAX_TOUCH + 2] = { 0 };
|
|
static u16 pre_event;
|
|
static u16 pre_index;
|
|
u8 touch_num = 0;
|
|
u8 key_value = 0;
|
|
u16 cur_event = 0;
|
|
u8 *coor_data = NULL;
|
|
u8 check_sum = 0;
|
|
s32 input_x = 0;
|
|
s32 input_y = 0;
|
|
s32 input_w = 0;
|
|
s32 id = 0;
|
|
s32 i = 0;
|
|
s32 ret = -1;
|
|
|
|
GTP_DEBUG_FUNC();
|
|
touch_num = data[0] & 0x0f;
|
|
if (touch_num > GTP_MAX_TOUCH) {
|
|
GTP_ERROR("Illegal finger number!");
|
|
return ERROR_VALUE;
|
|
}
|
|
|
|
memcpy(touch_data, data, 11);
|
|
|
|
/* read the remaining coor data
|
|
* 0x814E(touch status) + 8(every coordinate consist of 8 bytes data) * touch num +
|
|
* keycode + checksum
|
|
*/
|
|
if (touch_num > 1) {
|
|
ret = gt1x_i2c_read((GTP_READ_COOR_ADDR + 11), &touch_data[11], 1 + 8 * touch_num + 2 - 11);
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* cacl checksum */
|
|
for (i = 0; i < 1 + 8 * touch_num + 2; i++) {
|
|
check_sum += touch_data[i];
|
|
}
|
|
if (check_sum) { /* checksum error*/
|
|
ret = gt1x_i2c_read(GTP_READ_COOR_ADDR, touch_data, 3 + 8 * touch_num);
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
if (gtp_is_gt911)
|
|
goto skip_checksum;
|
|
|
|
for (i = 0, check_sum = 0; i < 3 + 8 * touch_num; i++) {
|
|
check_sum += touch_data[i];
|
|
}
|
|
if (check_sum) {
|
|
GTP_ERROR("Checksum error[%x]", check_sum);
|
|
return ERROR_VALUE;
|
|
}
|
|
}
|
|
|
|
skip_checksum:
|
|
/*
|
|
* cur_event , pre_event bit defination
|
|
* bits: bit4 bit3 bit2 bit1 bit0
|
|
* event: hover stylus_key stylus key touch
|
|
*/
|
|
key_value = touch_data[1 + 8 * touch_num];
|
|
/* start check current event */
|
|
if ((touch_data[0] & 0x10) && key_value) {
|
|
#if (GTP_HAVE_STYLUS_KEY || GTP_HAVE_TOUCH_KEY || TPD_HAVE_BUTTON)
|
|
/* get current key states */
|
|
if (key_value & 0xF0) {
|
|
SET_BIT(cur_event, BIT_STYLUS_KEY);
|
|
} else if (key_value & 0x0F) {
|
|
SET_BIT(cur_event, BIT_TOUCH_KEY);
|
|
}
|
|
#endif
|
|
}
|
|
#if GTP_WITH_STYLUS
|
|
else if (touch_data[1] & 0x80) {
|
|
SET_BIT(cur_event, BIT_STYLUS);
|
|
}
|
|
#endif
|
|
else if (touch_num) {
|
|
SET_BIT(cur_event, BIT_TOUCH);
|
|
}
|
|
|
|
/* start handle current event and pre-event */
|
|
#if GTP_HAVE_STYLUS_KEY
|
|
if (CHK_BIT(cur_event, BIT_STYLUS_KEY) || CHK_BIT(pre_event, BIT_STYLUS_KEY)) {
|
|
/*
|
|
* 0x10 -- stylus key0 down
|
|
* 0x20 -- stylus key1 down
|
|
* 0x40 -- stylus key0 & stylus key1 both down
|
|
*/
|
|
u8 temp = (key_value & 0x40) ? 0x30 : key_value;
|
|
for (i = 4; i < 6; i++) {
|
|
input_report_key(pen_dev, gt1x_stylus_key_array[i - 4], temp & (0x01 << i));
|
|
}
|
|
GTP_DEBUG("Stulus key event.");
|
|
}
|
|
#endif
|
|
|
|
#if GTP_WITH_STYLUS
|
|
if (CHK_BIT(cur_event, BIT_STYLUS)) {
|
|
coor_data = &touch_data[1];
|
|
id = coor_data[0] & 0x7F;
|
|
input_x = coor_data[1] | (coor_data[2] << 8);
|
|
input_y = coor_data[3] | (coor_data[4] << 8);
|
|
input_w = coor_data[5] | (coor_data[6] << 8);
|
|
|
|
input_x = GTP_WARP_X(gt1x_abs_x_max, input_x);
|
|
input_y = GTP_WARP_Y(gt1x_abs_y_max, input_y);
|
|
|
|
GTP_DEBUG("Pen touch DOWN.");
|
|
gt1x_pen_down(input_x, input_y, input_w, 0);
|
|
} else if (CHK_BIT(pre_event, BIT_STYLUS)) {
|
|
GTP_DEBUG("Pen touch UP.");
|
|
gt1x_pen_up(0);
|
|
}
|
|
#endif
|
|
|
|
#if GTP_HAVE_TOUCH_KEY
|
|
if (CHK_BIT(cur_event, BIT_TOUCH_KEY) || CHK_BIT(pre_event, BIT_TOUCH_KEY)) {
|
|
for (i = 0; i < GTP_MAX_KEY_NUM; i++) {
|
|
input_report_key(dev, gt1x_touch_key_array[i], key_value & (0x01 << i));
|
|
}
|
|
if (CHK_BIT(cur_event, BIT_TOUCH_KEY)) {
|
|
GTP_DEBUG("Key Down.");
|
|
} else {
|
|
GTP_DEBUG("Key Up.");
|
|
}
|
|
}
|
|
#elif TPD_HAVE_BUTTON
|
|
if (CHK_BIT(cur_event, BIT_TOUCH_KEY) || CHK_BIT(pre_event, BIT_TOUCH_KEY)) {
|
|
for (i = 0; i < TPD_KEY_COUNT; i++) {
|
|
if (key_value & (0x01 << i)) {
|
|
gt1x_touch_down(tpd_virtual_key_array[i].x, tpd_virtual_key_array[i].y, 0, 0);
|
|
GTP_DEBUG("Key Down.");
|
|
break;
|
|
}
|
|
}
|
|
if (i == TPD_KEY_COUNT) {
|
|
gt1x_touch_up(0);
|
|
GTP_DEBUG("Key Up.");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* finger touch event*/
|
|
if (CHK_BIT(cur_event, BIT_TOUCH)) {
|
|
u8 report_num = 0;
|
|
coor_data = &touch_data[1];
|
|
id = coor_data[0] & 0x0F;
|
|
for (i = 0; i < GTP_MAX_TOUCH; i++) {
|
|
if (i == id) {
|
|
input_x = coor_data[1] | (coor_data[2] << 8);
|
|
input_y = coor_data[3] | (coor_data[4] << 8);
|
|
input_w = coor_data[5] | (coor_data[6] << 8);
|
|
|
|
input_x = GTP_WARP_X(gt1x_abs_x_max, input_x);
|
|
input_y = GTP_WARP_Y(gt1x_abs_y_max, input_y);
|
|
|
|
GTP_DEBUG("(%d)(%d,%d)[%d]", id, input_x, input_y, input_w);
|
|
gt1x_touch_down(input_x, input_y, input_w, i);
|
|
if (report_num++ < touch_num) {
|
|
coor_data += 8;
|
|
id = coor_data[0] & 0x0F;
|
|
}
|
|
pre_index |= 0x01 << i;
|
|
} else if (pre_index & (0x01 << i)) {
|
|
if (gt1x_ics_slot_report)
|
|
gt1x_touch_up(i);
|
|
pre_index &= ~(0x01 << i);
|
|
}
|
|
}
|
|
} else if (CHK_BIT(pre_event, BIT_TOUCH)) {
|
|
if (gt1x_ics_slot_report) {
|
|
int cycles = pre_index < 3 ? 3 : GTP_MAX_TOUCH;
|
|
|
|
for (i = 0; i < cycles; i++) {
|
|
if (pre_index >> i & 0x01)
|
|
gt1x_touch_up(i);
|
|
}
|
|
} else {
|
|
gt1x_touch_up(0);
|
|
}
|
|
GTP_DEBUG("Released Touch.");
|
|
pre_index = 0;
|
|
}
|
|
|
|
/* start sync input report */
|
|
if (CHK_BIT(cur_event, BIT_STYLUS_KEY | BIT_STYLUS)
|
|
|| CHK_BIT(pre_event, BIT_STYLUS_KEY | BIT_STYLUS)) {
|
|
input_sync(pen_dev);
|
|
}
|
|
|
|
if (CHK_BIT(cur_event, BIT_TOUCH_KEY | BIT_TOUCH)
|
|
|| CHK_BIT(pre_event, BIT_TOUCH_KEY | BIT_TOUCH)) {
|
|
input_sync(dev);
|
|
}
|
|
|
|
if (unlikely(!pre_event && !cur_event)) {
|
|
GTP_DEBUG("Additional Int Pulse.");
|
|
} else {
|
|
pre_event = cur_event;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if GTP_WITH_STYLUS
|
|
struct input_dev *pen_dev;
|
|
|
|
static void gt1x_pen_init(void)
|
|
{
|
|
s32 ret = 0;
|
|
|
|
pen_dev = input_allocate_device();
|
|
if (pen_dev == NULL) {
|
|
GTP_ERROR("Failed to allocate input device for pen/stylus.");
|
|
return;
|
|
}
|
|
|
|
pen_dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
pen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
set_bit(BTN_TOOL_PEN, pen_dev->keybit);
|
|
set_bit(INPUT_PROP_DIRECT, pen_dev->propbit);
|
|
|
|
#if GTP_HAVE_STYLUS_KEY
|
|
input_set_capability(pen_dev, EV_KEY, BTN_STYLUS);
|
|
input_set_capability(pen_dev, EV_KEY, BTN_STYLUS2);
|
|
#endif
|
|
|
|
input_set_abs_params(pen_dev, ABS_MT_POSITION_X, 0, gt1x_abs_x_max, 0, 0);
|
|
input_set_abs_params(pen_dev, ABS_MT_POSITION_Y, 0, gt1x_abs_y_max, 0, 0);
|
|
input_set_abs_params(pen_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
|
|
input_set_abs_params(pen_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
|
|
input_set_abs_params(pen_dev, ABS_MT_TRACKING_ID, 0, 255, 0, 0);
|
|
|
|
pen_dev->name = "goodix-pen";
|
|
pen_dev->phys = "input/ts";
|
|
pen_dev->id.bustype = BUS_I2C;
|
|
|
|
ret = input_register_device(pen_dev);
|
|
if (ret) {
|
|
GTP_ERROR("Register %s input device failed", pen_dev->name);
|
|
return;
|
|
}
|
|
}
|
|
|
|
void gt1x_pen_down(s32 x, s32 y, s32 size, s32 id)
|
|
{
|
|
input_report_key(pen_dev, BTN_TOOL_PEN, 1);
|
|
#if GTP_CHANGE_X2Y
|
|
GTP_SWAP(x, y);
|
|
#endif
|
|
|
|
if (gt1x_ics_slot_report) {
|
|
input_mt_slot(pen_dev, id);
|
|
input_report_abs(pen_dev, ABS_MT_PRESSURE, size);
|
|
input_report_abs(pen_dev, ABS_MT_TOUCH_MAJOR, size);
|
|
input_report_abs(pen_dev, ABS_MT_TRACKING_ID, id);
|
|
input_report_abs(pen_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(pen_dev, ABS_MT_POSITION_Y, y);
|
|
} else {
|
|
input_report_key(pen_dev, BTN_TOUCH, 1);
|
|
if ((!size) && (!id)) {
|
|
/* for virtual button */
|
|
input_report_abs(pen_dev, ABS_MT_PRESSURE, 100);
|
|
input_report_abs(pen_dev, ABS_MT_TOUCH_MAJOR, 100);
|
|
} else {
|
|
input_report_abs(pen_dev, ABS_MT_PRESSURE, size);
|
|
input_report_abs(pen_dev, ABS_MT_TOUCH_MAJOR, size);
|
|
input_report_abs(pen_dev, ABS_MT_TRACKING_ID, id);
|
|
}
|
|
input_report_abs(pen_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(pen_dev, ABS_MT_POSITION_Y, y);
|
|
input_mt_sync(pen_dev);
|
|
}
|
|
}
|
|
|
|
void gt1x_pen_up(s32 id)
|
|
{
|
|
input_report_key(pen_dev, BTN_TOOL_PEN, 0);
|
|
if (gt1x_ics_slot_report) {
|
|
input_mt_slot(pen_dev, id);
|
|
input_report_abs(pen_dev, ABS_MT_TRACKING_ID, -1);
|
|
} else {
|
|
input_report_key(pen_dev, BTN_TOUCH, 0);
|
|
input_mt_sync(pen_dev);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Proximity Module
|
|
*/
|
|
#if GTP_PROXIMITY
|
|
#define GTP_PS_DEV_NAME "goodix_proximity"
|
|
#define GTP_REG_PROXIMITY_ENABLE 0x8049
|
|
#define PS_FARAWAY 1
|
|
#define PS_NEAR 0
|
|
struct gt1x_ps_device{
|
|
int enabled; /* module enabled/disabled */
|
|
int state; /* Faraway or Near */
|
|
#ifdef PLATFORM_MTK
|
|
struct hwmsen_object obj_ps;
|
|
#else
|
|
struct input_dev *input_dev;
|
|
struct kobject *kobj;
|
|
#endif
|
|
};
|
|
static struct gt1x_ps_device *gt1x_ps_dev;
|
|
|
|
static void gt1x_ps_report(int state)
|
|
{
|
|
#ifdef PLATFORM_MTK
|
|
s32 ret = -1;
|
|
|
|
hwm_sensor_data sensor_data;
|
|
/*map and store data to hwm_sensor_data*/
|
|
sensor_data.values[0] = !!state;
|
|
sensor_data.value_divide = 1;
|
|
sensor_data.status = SENSOR_STATUS_ACCURACY_MEDIUM;
|
|
/*report to the up-layer*/
|
|
ret = hwmsen_get_interrupt_data(ID_PROXIMITY, &sensor_data);
|
|
if (ret) {
|
|
GTP_ERROR("Call hwmsen_get_interrupt_data fail = %d\n", ret);
|
|
}
|
|
#else
|
|
input_report_abs(gt1x_ps_dev->input_dev, ABS_DISTANCE, !!state);
|
|
input_sync(gt1x_ps_dev->input_dev);
|
|
#endif /* End PLATFROM_MTK */
|
|
|
|
GTP_INFO("Report proximity state: %s", state == PS_FARAWAY ? "FARAWAY":"NEAR");
|
|
}
|
|
|
|
static s32 gt1x_ps_enable(s32 enable)
|
|
{
|
|
u8 state;
|
|
s32 ret = -1;
|
|
|
|
GTP_INFO("Proximity function to be %s.", enable ? "on" : "off");
|
|
state = enable ? 1 : 0;
|
|
if (gt1x_chip_type == CHIP_TYPE_GT1X)
|
|
ret = gt1x_i2c_write(GTP_REG_PROXIMITY_ENABLE, &state, 1);
|
|
else if (gt1x_chip_type == CHIP_TYPE_GT2X)
|
|
ret = gt1x_send_cmd(state ? 0x12 : 0x13, 0);
|
|
if (ret) {
|
|
GTP_ERROR("GTP %s proximity cmd failed.", state ? "enable" : "disable");
|
|
}
|
|
|
|
if (!ret && enable) {
|
|
gt1x_ps_dev->enabled = 1;
|
|
} else {
|
|
gt1x_ps_dev->enabled = 0;
|
|
}
|
|
gt1x_ps_dev->state = PS_FARAWAY;
|
|
GTP_INFO("Proximity function %s %s.", state ? "enable" : "disable", ret ? "fail" : "success");
|
|
return ret;
|
|
}
|
|
|
|
int gt1x_prox_event_handler(u8 *data)
|
|
{
|
|
u8 ps = 0;
|
|
|
|
if (gt1x_ps_dev && gt1x_ps_dev->enabled) {
|
|
ps = (data[0] & 0x60) ? 0 : 1;
|
|
if (ps != gt1x_ps_dev->state) {
|
|
gt1x_ps_report(ps);
|
|
gt1x_ps_dev->state = ps;
|
|
GTP_DEBUG("REG INDEX[0x814E]:0x%02X\n", data[0]);
|
|
}
|
|
|
|
return (ps == PS_NEAR ? 1 : 0);
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
#ifdef PLATFORM_MTK
|
|
static inline s32 gt1x_get_ps_value(void)
|
|
{
|
|
return gt1x_ps_dev->state;
|
|
}
|
|
|
|
static s32 gt1x_ps_operate(void *self, u32 command, void *buff_in, s32 size_in, void *buff_out, s32 size_out, s32 *actualout)
|
|
{
|
|
s32 err = 0;
|
|
s32 value;
|
|
hwm_sensor_data *sensor_data;
|
|
|
|
GTP_INFO("psensor operator cmd:%d", command);
|
|
switch (command) {
|
|
case SENSOR_DELAY:
|
|
if ((buff_in == NULL) || (size_in < sizeof(int))) {
|
|
GTP_ERROR("Set delay parameter error!");
|
|
err = -EINVAL;
|
|
}
|
|
/*Do nothing*/
|
|
break;
|
|
|
|
case SENSOR_ENABLE:
|
|
if ((buff_in == NULL) || (size_in < sizeof(int))) {
|
|
GTP_ERROR("Enable sensor parameter error!");
|
|
err = -EINVAL;
|
|
} else {
|
|
value = *(int *)buff_in;
|
|
err = gt1x_ps_enable(value);
|
|
}
|
|
|
|
break;
|
|
|
|
case SENSOR_GET_DATA:
|
|
if ((buff_out == NULL) || (size_out < sizeof(hwm_sensor_data))) {
|
|
GTP_ERROR("Get sensor data parameter error!");
|
|
err = -EINVAL;
|
|
} else {
|
|
sensor_data = (hwm_sensor_data *) buff_out;
|
|
sensor_data->values[0] = gt1x_get_ps_value();
|
|
sensor_data->value_divide = 1;
|
|
sensor_data->status = SENSOR_STATUS_ACCURACY_MEDIUM;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
GTP_ERROR("proxmy sensor operate function no this parameter %d!\n", command);
|
|
err = -1;
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
#endif
|
|
|
|
#ifndef PLATFORM_MTK
|
|
static ssize_t gt1x_ps_enable_show(struct kobject *kobj, struct kobj_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return scnprintf(buf, PAGE_SIZE, "%d", gt1x_ps_dev->enabled);
|
|
}
|
|
|
|
static ssize_t gt1x_ps_enable_store(struct kobject *kobj, struct kobj_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned int input;
|
|
if (sscanf(buf, "%u", &input) != 1) {
|
|
return -EINVAL;
|
|
}
|
|
if (input == 1) {
|
|
gt1x_ps_enable(1);
|
|
gt1x_ps_report(PS_FARAWAY);
|
|
} else if (input == 0) {
|
|
gt1x_ps_report(PS_FARAWAY);
|
|
gt1x_ps_enable(0);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
return count;
|
|
}
|
|
|
|
static ssize_t gt1x_ps_state_show(struct kobject *kobj, struct kobj_attribute *attr,
|
|
char *buf)
|
|
{
|
|
return scnprintf(buf, PAGE_SIZE, "%d", gt1x_ps_dev->state);
|
|
}
|
|
|
|
static ssize_t gt1x_ps_state_store(struct kobject *kobj, struct kobj_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned int input;
|
|
|
|
if (sscanf(buf, "%u", &input) != 1) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!gt1x_ps_dev->enabled) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (input == 1) {
|
|
gt1x_ps_dev->state = PS_FARAWAY;
|
|
} else if (input == 0) {
|
|
gt1x_ps_dev->state = PS_NEAR;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
gt1x_ps_report(gt1x_ps_dev->state);
|
|
return count;
|
|
}
|
|
|
|
static struct kobj_attribute ps_attrs[] = {
|
|
__ATTR(enable, S_IWUGO | S_IRUGO, gt1x_ps_enable_show, gt1x_ps_enable_store),
|
|
__ATTR(state, S_IWUGO | S_IRUGO, gt1x_ps_state_show, gt1x_ps_state_store)
|
|
};
|
|
|
|
#endif /* End PLATFORM_MTK */
|
|
|
|
static int gt1x_ps_init(void)
|
|
{
|
|
int err;
|
|
|
|
gt1x_ps_dev = kzalloc(sizeof(struct gt1x_ps_device), GFP_KERNEL);
|
|
if (!gt1x_ps_dev) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
gt1x_ps_dev->state = PS_FARAWAY;
|
|
|
|
#ifdef PLATFORM_MTK
|
|
gt1x_ps_dev->obj_ps.polling = 0; /* 0--interrupt mode;1--polling mode; */
|
|
gt1x_ps_dev->obj_ps.sensor_operate = gt1x_ps_operate;
|
|
|
|
if (hwmsen_attach(ID_PROXIMITY, >1x_ps_dev->obj_ps)) {
|
|
GTP_ERROR("hwmsen attach fail, return:%d.", err);
|
|
goto err_exit;
|
|
}
|
|
|
|
GTP_INFO("hwmsen attach OK.");
|
|
return 0;
|
|
#else
|
|
gt1x_ps_dev->input_dev = input_allocate_device();
|
|
if (!gt1x_ps_dev->input_dev) {
|
|
GTP_ERROR("Failed to alloc inpput device for proximity!");
|
|
err = -ENOMEM;
|
|
goto err_exit;
|
|
}
|
|
|
|
gt1x_ps_dev->input_dev->name = GTP_PS_DEV_NAME;
|
|
gt1x_ps_dev->input_dev->phys = "goodix/proximity";
|
|
gt1x_ps_dev->input_dev->id.bustype = BUS_I2C;
|
|
gt1x_ps_dev->input_dev->id.vendor = 0xDEED;
|
|
gt1x_ps_dev->input_dev->id.product = 0xBEEF;
|
|
gt1x_ps_dev->input_dev->id.version = 1;
|
|
set_bit(EV_ABS, gt1x_ps_dev->input_dev->evbit);
|
|
input_set_abs_params(gt1x_ps_dev->input_dev, ABS_DISTANCE, 0, 1, 0, 0);
|
|
|
|
err = input_register_device(gt1x_ps_dev->input_dev);
|
|
if (err) {
|
|
GTP_ERROR("Failed to register proximity input device: %s!", gt1x_ps_dev->input_dev->name);
|
|
goto err_register_dev;
|
|
}
|
|
/* register sysfs interface */
|
|
if (!sysfs_rootdir) {
|
|
sysfs_rootdir = kobject_create_and_add("goodix", NULL);
|
|
if (!sysfs_rootdir) {
|
|
GTP_ERROR("Failed to create and add sysfs interface: goodix.");
|
|
err = -ENOMEM;
|
|
goto err_register_dev;
|
|
}
|
|
}
|
|
|
|
gt1x_ps_dev->kobj = kobject_create_and_add("proximity", sysfs_rootdir);
|
|
if (!gt1x_ps_dev->kobj) {
|
|
GTP_ERROR("Failed to create and add sysfs interface: proximity.");
|
|
err = -ENOMEM;
|
|
goto err_register_dev;
|
|
}
|
|
/*create sysfs files*/
|
|
{
|
|
int i;
|
|
for (i = 0; i < sizeof(ps_attrs)/sizeof(ps_attrs[0]); i++) {
|
|
if (sysfs_create_file(gt1x_ps_dev->kobj, &ps_attrs[i].attr)) {
|
|
goto err_create_file;
|
|
}
|
|
}
|
|
}
|
|
|
|
GTP_INFO("Proximity sensor init OK.");
|
|
return 0;
|
|
err_create_file:
|
|
kobject_put(gt1x_ps_dev->kobj);
|
|
err_register_dev:
|
|
input_free_device(gt1x_ps_dev->input_dev);
|
|
#endif /* End PLATFROM_MTK */
|
|
|
|
err_exit:
|
|
kfree(gt1x_ps_dev);
|
|
gt1x_ps_dev = NULL;
|
|
return err;
|
|
}
|
|
|
|
static void gt1x_ps_deinit(void)
|
|
{
|
|
if (gt1x_ps_dev) {
|
|
#ifndef PLATFORM_MTK
|
|
int i = 0;
|
|
for (; i < sizeof(ps_attrs) / sizeof(ps_attrs[0]); i++) {
|
|
sysfs_remove_file(gt1x_ps_dev->kobj, &ps_attrs[i].attr);
|
|
}
|
|
kobject_del(gt1x_ps_dev->kobj);
|
|
input_free_device(gt1x_ps_dev->input_dev);
|
|
#endif
|
|
kfree(gt1x_ps_dev);
|
|
}
|
|
}
|
|
|
|
#endif /*GTP_PROXIMITY */
|
|
|
|
/**
|
|
* ESD Protect Module
|
|
*/
|
|
#if GTP_ESD_PROTECT
|
|
static int esd_work_cycle = 200;
|
|
static struct delayed_work esd_check_work;
|
|
static int esd_running;
|
|
static struct mutex esd_lock;
|
|
static void gt1x_esd_check_func(struct work_struct *);
|
|
|
|
void gt1x_init_esd_protect(void)
|
|
{
|
|
esd_work_cycle = 2 * HZ; /* HZ: clock ticks in 1 second generated by system */
|
|
GTP_DEBUG("Clock ticks for an esd cycle: %d", esd_work_cycle);
|
|
INIT_DELAYED_WORK(&esd_check_work, gt1x_esd_check_func);
|
|
mutex_init(&esd_lock);
|
|
}
|
|
|
|
static void gt1x_deinit_esd_protect(void)
|
|
{
|
|
gt1x_esd_switch(SWITCH_OFF);
|
|
}
|
|
|
|
void gt1x_esd_switch(s32 on)
|
|
{
|
|
mutex_lock(&esd_lock);
|
|
if (SWITCH_ON == on) { /* switch on esd check */
|
|
if (!esd_running) {
|
|
esd_running = 1;
|
|
GTP_INFO("Esd protector started!");
|
|
queue_delayed_work(gt1x_workqueue, &esd_check_work, esd_work_cycle);
|
|
}
|
|
} else { /* switch off esd check */
|
|
if (esd_running) {
|
|
esd_running = 0;
|
|
GTP_INFO("Esd protector stoped!");
|
|
cancel_delayed_work(&esd_check_work);
|
|
}
|
|
}
|
|
mutex_unlock(&esd_lock);
|
|
}
|
|
|
|
static void gt1x_esd_check_func(struct work_struct *work)
|
|
{
|
|
s32 i = 0;
|
|
s32 ret = -1;
|
|
u8 esd_buf[4] = { 0 };
|
|
|
|
if (!esd_running) {
|
|
GTP_INFO("Esd protector suspended!");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
ret = gt1x_i2c_read(GTP_REG_CMD, esd_buf, 4);
|
|
GTP_DEBUG("[Esd]0x8040 = 0x%02X, 0x8043 = 0x%02X", esd_buf[0], esd_buf[3]);
|
|
if (!ret && esd_buf[0] != 0xAA && esd_buf[3] == 0xAA) {
|
|
break;
|
|
}
|
|
msleep(50);
|
|
}
|
|
|
|
if (likely(i < 3)) {
|
|
/* IC works normally, Write 0x8040 0xAA, feed the watchdog */
|
|
gt1x_send_cmd(GTP_CMD_ESD, 0);
|
|
} else {
|
|
if (esd_running) {
|
|
GTP_ERROR("IC works abnormally! Process reset guitar.");
|
|
memset(esd_buf, 0x01, sizeof(esd_buf));
|
|
gt1x_i2c_write(0x4226, esd_buf, sizeof(esd_buf));
|
|
msleep(50);
|
|
|
|
gt1x_power_reset();
|
|
} else {
|
|
GTP_INFO("Esd protector suspended, no need reset!");
|
|
}
|
|
}
|
|
|
|
mutex_lock(&esd_lock);
|
|
if (esd_running) {
|
|
queue_delayed_work(gt1x_workqueue, &esd_check_work, esd_work_cycle);
|
|
} else {
|
|
GTP_INFO("Esd protector suspended!");
|
|
}
|
|
mutex_unlock(&esd_lock);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Smart Cover Module
|
|
*/
|
|
#if GTP_SMART_COVER
|
|
struct smart_cover_device{
|
|
int enabled;
|
|
int state; /* 0:cover faraway 1:near */
|
|
int suspended; /* suspended or woring */
|
|
struct kobject *kobj;
|
|
u8 config[GTP_CONFIG_MAX_LENGTH];
|
|
int cfg_len;
|
|
};
|
|
static struct smart_cover_device *gt1x_sc_dev;
|
|
|
|
/**
|
|
* gt1x_smart_cover_update_state - update smart cover config
|
|
*/
|
|
static int gt1x_smart_cover_update_state(void)
|
|
{
|
|
int ret = 0;
|
|
struct smart_cover_device *dev = gt1x_sc_dev;
|
|
|
|
if (!dev) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!dev->suspended) {
|
|
if (dev->state) { /* near */
|
|
ret = gt1x_send_cfg(dev->config, dev->cfg_len);
|
|
} else {
|
|
#if GTP_CHARGER_SWITCH
|
|
gt1x_charger_config(1); /*charger detector module check and*/
|
|
/*send a config*/
|
|
#else
|
|
ret = gt1x_send_cfg(gt1x_config, gt1x_cfg_length);
|
|
#endif
|
|
}
|
|
GTP_DEBUG("Update cover state %s.", dev->state ? "Nearby" : "Far away");
|
|
} else {
|
|
GTP_DEBUG("TP is suspended, do nothing.");
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t smart_cover_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
|
|
{
|
|
struct smart_cover_device *dev = gt1x_sc_dev;
|
|
|
|
if (!dev) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
return scnprintf(buf, PAGE_SIZE, "%d", dev->state);
|
|
}
|
|
|
|
static ssize_t smart_cover_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t count)
|
|
{
|
|
struct smart_cover_device *dev = gt1x_sc_dev;
|
|
int s = (buf[0] - '0');
|
|
|
|
if (!dev || !dev->enabled || s > 1 || s == dev->state) {
|
|
return count;
|
|
}
|
|
|
|
dev->state = s;
|
|
gt1x_smart_cover_update_state();
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* gt1x_parse_sc_cfg - parse smart cover config
|
|
* @sensor_id: sensor id of the hardware
|
|
*/
|
|
int gt1x_parse_sc_cfg(int sensor_id)
|
|
{
|
|
#undef _cfg_array_
|
|
#define _cfg_array_(n) GTP_SMART_COVER_CFG_GROUP##n
|
|
u8 *cfg;
|
|
int *len;
|
|
|
|
if (!gt1x_sc_dev)
|
|
return -ENODEV;
|
|
cfg = gt1x_sc_dev->config;
|
|
len = >1x_sc_dev->cfg_len;
|
|
|
|
#if GTP_DRIVER_SEND_CFG
|
|
do {
|
|
u8 cfg_grp0[] = _cfg_array_(0);
|
|
u8 cfg_grp1[] = _cfg_array_(1);
|
|
u8 cfg_grp2[] = _cfg_array_(2);
|
|
u8 cfg_grp3[] = _cfg_array_(3);
|
|
u8 cfg_grp4[] = _cfg_array_(4);
|
|
u8 cfg_grp5[] = _cfg_array_(5);
|
|
u8 *cfgs[] = {
|
|
cfg_grp0, cfg_grp1, cfg_grp2,
|
|
cfg_grp3, cfg_grp4, cfg_grp5
|
|
};
|
|
u8 cfg_lens[] = {
|
|
CFG_GROUP_LEN(cfg_grp0), CFG_GROUP_LEN(cfg_grp1),
|
|
CFG_GROUP_LEN(cfg_grp2), CFG_GROUP_LEN(cfg_grp3),
|
|
CFG_GROUP_LEN(cfg_grp4), CFG_GROUP_LEN(cfg_grp5)
|
|
};
|
|
|
|
if (sensor_id >= sizeof(cfgs) / sizeof(cfgs[0])) {
|
|
GTP_ERROR("Invalid sensor id.");
|
|
return -1;
|
|
}
|
|
|
|
*len = cfg_lens[sensor_id];
|
|
if (*len == 0 || *len != gt1x_cfg_length) {
|
|
memset(cfg, 0, GTP_CONFIG_MAX_LENGTH);
|
|
*len = 0;
|
|
GTP_ERROR("Length of config is incorrect.");
|
|
return -1;
|
|
}
|
|
|
|
memcpy(cfg, cfgs[sensor_id], cfg_lens[sensor_id]);
|
|
|
|
cfg[0] &= 0x7F;
|
|
set_reg_bit(cfg[TRIGGER_LOC], 0, gt1x_int_type);
|
|
set_reg_bit(cfg[MODULE_SWITCH3_LOC], 5, !gt1x_wakeup_level);
|
|
} while (0);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct kobj_attribute sc_attr =
|
|
__ATTR(state, S_IWUGO | S_IRUGO, smart_cover_show, smart_cover_store);
|
|
static int gt1x_smart_cover_init(void)
|
|
{
|
|
int err = 0;
|
|
|
|
gt1x_sc_dev = kzalloc(sizeof(struct smart_cover_device), GFP_KERNEL);
|
|
if (!gt1x_sc_dev) {
|
|
GTP_ERROR("SmartCover init failed in step: 1.");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
gt1x_sc_dev->enabled = 1;
|
|
gt1x_parse_sc_cfg(gt1x_version.sensor_id);
|
|
|
|
if (!sysfs_rootdir) {
|
|
/*this kobject is shared between modules, do not free it when error occur*/
|
|
sysfs_rootdir = kobject_create_and_add(GOODIX_SYSFS_DIR, NULL);
|
|
if (!sysfs_rootdir) {
|
|
err = -2;
|
|
goto exit_free_mem;
|
|
}
|
|
}
|
|
|
|
if (!gt1x_sc_dev->kobj)
|
|
gt1x_sc_dev->kobj = kobject_create_and_add("smartcover", sysfs_rootdir);
|
|
if (!gt1x_sc_dev->kobj) {
|
|
err = -3;
|
|
goto exit_free_mem;
|
|
}
|
|
|
|
if (sysfs_create_file(gt1x_sc_dev->kobj, &sc_attr.attr)) {
|
|
err = -4;
|
|
goto exit_put_kobj;
|
|
}
|
|
GTP_INFO("SmartCover module init OK.");
|
|
return 0;
|
|
exit_put_kobj:
|
|
kobject_put(gt1x_sc_dev->kobj);
|
|
exit_free_mem:
|
|
kfree(gt1x_sc_dev);
|
|
gt1x_sc_dev = NULL;
|
|
GTP_ERROR("SmartCover init failed in step:%d", -err);
|
|
return err;
|
|
}
|
|
|
|
static void gt1x_smart_cover_deinit(void)
|
|
{
|
|
if (!gt1x_sc_dev) {
|
|
return;
|
|
}
|
|
|
|
kobject_del(gt1x_sc_dev->kobj);
|
|
kfree(gt1x_sc_dev);
|
|
gt1x_sc_dev = NULL;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Charger Detect & Switch Module
|
|
*/
|
|
#if GTP_CHARGER_SWITCH
|
|
static u8 gt1x_config_charger[GTP_CONFIG_MAX_LENGTH] = { 0 };
|
|
static struct delayed_work charger_switch_work;
|
|
static int charger_work_cycle = 200;
|
|
static spinlock_t charger_lock;
|
|
static int charger_running;
|
|
static void gt1x_charger_work_func(struct work_struct *);
|
|
|
|
/**
|
|
* gt1x_parse_chr_cfg - parse charger config
|
|
* @sensor_id: sensor id of the hardware
|
|
* Return: 0: succeed, <0 error
|
|
*/
|
|
int gt1x_parse_chr_cfg(int sensor_id)
|
|
{
|
|
#undef _cfg_array_
|
|
#define _cfg_array_(n) GTP_CHARGER_CFG_GROUP##n
|
|
u8 *cfg;
|
|
int len;
|
|
cfg = gt1x_config_charger;
|
|
|
|
#if GTP_DRIVER_SEND_CFG
|
|
do {
|
|
u8 cfg_grp0[] = _cfg_array_(0);
|
|
u8 cfg_grp1[] = _cfg_array_(1);
|
|
u8 cfg_grp2[] = _cfg_array_(2);
|
|
u8 cfg_grp3[] = _cfg_array_(3);
|
|
u8 cfg_grp4[] = _cfg_array_(4);
|
|
u8 cfg_grp5[] = _cfg_array_(5);
|
|
u8 *cfgs[] = {
|
|
cfg_grp0, cfg_grp1, cfg_grp2,
|
|
cfg_grp3, cfg_grp4, cfg_grp5
|
|
};
|
|
u8 cfg_lens[] = {
|
|
CFG_GROUP_LEN(cfg_grp0), CFG_GROUP_LEN(cfg_grp1),
|
|
CFG_GROUP_LEN(cfg_grp2), CFG_GROUP_LEN(cfg_grp3),
|
|
CFG_GROUP_LEN(cfg_grp4), CFG_GROUP_LEN(cfg_grp5)
|
|
};
|
|
|
|
if (sensor_id >= sizeof(cfgs) / sizeof(cfgs[0])) {
|
|
return -1;
|
|
}
|
|
|
|
len = cfg_lens[sensor_id];
|
|
if (len == 0 || len != gt1x_cfg_length) {
|
|
memset(cfg, 0, GTP_CONFIG_MAX_LENGTH);
|
|
GTP_ERROR("Length of config is incorrect.");
|
|
return -1;
|
|
}
|
|
|
|
memcpy(cfg, cfgs[sensor_id], cfg_lens[sensor_id]);
|
|
|
|
cfg[0] &= 0x7F;
|
|
cfg[RESOLUTION_LOC] = (u8) gt1x_abs_x_max;
|
|
cfg[RESOLUTION_LOC + 1] = (u8) (gt1x_abs_x_max >> 8);
|
|
cfg[RESOLUTION_LOC + 2] = (u8) gt1x_abs_y_max;
|
|
cfg[RESOLUTION_LOC + 3] = (u8) (gt1x_abs_y_max >> 8);
|
|
|
|
set_reg_bit(cfg[TRIGGER_LOC], 0, gt1x_int_type);
|
|
set_reg_bit(cfg[MODULE_SWITCH3_LOC], 5, !gt1x_wakeup_level);
|
|
} while (0);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void gt1x_init_charger(void)
|
|
{
|
|
charger_work_cycle = 2 * HZ; /* HZ: clock ticks in 1 second generated by system */
|
|
GTP_DEBUG("Clock ticks for an charger cycle: %d", charger_work_cycle);
|
|
INIT_DELAYED_WORK(&charger_switch_work, gt1x_charger_work_func);
|
|
spin_lock_init(&charger_lock);
|
|
|
|
if (gt1x_parse_chr_cfg(gt1x_version.sensor_id) < 0) {
|
|
GTP_ERROR("Error occured when parse charger config.");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gt1x_charger_switch - switch states of charging work thread
|
|
*
|
|
* @on: SWITCH_ON - start work thread, SWITCH_OFF: stop .
|
|
*/
|
|
void gt1x_charger_switch(s32 on)
|
|
{
|
|
spin_lock(&charger_lock);
|
|
if (SWITCH_ON == on) {
|
|
if (!charger_running) {
|
|
charger_running = 1;
|
|
spin_unlock(&charger_lock);
|
|
GTP_INFO("Charger checker started!");
|
|
queue_delayed_work(gt1x_workqueue, &charger_switch_work, charger_work_cycle);
|
|
} else {
|
|
spin_unlock(&charger_lock);
|
|
}
|
|
} else {
|
|
if (charger_running) {
|
|
charger_running = 0;
|
|
spin_unlock(&charger_lock);
|
|
cancel_delayed_work(&charger_switch_work);
|
|
GTP_INFO("Charger checker stoped!");
|
|
} else {
|
|
spin_unlock(&charger_lock);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* gt1x_charger_config - check and update charging status configuration
|
|
* @dir_update
|
|
* 0: check before send charging status configuration
|
|
* 1: directly send charging status configuration
|
|
*
|
|
*/
|
|
void gt1x_charger_config(s32 dir_update)
|
|
{
|
|
static u8 chr_pluggedin;
|
|
|
|
#if GTP_SMART_COVER
|
|
if (gt1x_sc_dev && gt1x_sc_dev->enabled
|
|
&& gt1x_sc_dev->state) {
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
if (gt1x_get_charger_status()) {
|
|
if (!chr_pluggedin || dir_update) {
|
|
GTP_INFO("Charger Plugin.");
|
|
if (gt1x_send_cfg(gt1x_config_charger, gt1x_cfg_length)) {
|
|
GTP_ERROR("Send config for Charger Plugin failed!");
|
|
}
|
|
if (gt1x_send_cmd(GTP_CMD_CHARGER_ON, 0)) {
|
|
GTP_ERROR("Update status for Charger Plugin failed!");
|
|
}
|
|
chr_pluggedin = 1;
|
|
}
|
|
} else {
|
|
if (chr_pluggedin || dir_update) {
|
|
GTP_INFO("Charger Plugout.");
|
|
if (gt1x_send_cfg(gt1x_config, gt1x_cfg_length)) {
|
|
GTP_ERROR("Send config for Charger Plugout failed!");
|
|
}
|
|
if (gt1x_send_cmd(GTP_CMD_CHARGER_OFF, 0)) {
|
|
GTP_ERROR("Update status for Charger Plugout failed!");
|
|
}
|
|
chr_pluggedin = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void gt1x_charger_work_func(struct work_struct *work)
|
|
{
|
|
if (!charger_running) {
|
|
GTP_INFO("Charger checker suspended!");
|
|
return;
|
|
}
|
|
|
|
gt1x_charger_config(0);
|
|
|
|
GTP_DEBUG("Charger check done!");
|
|
if (charger_running) {
|
|
queue_delayed_work(gt1x_workqueue, &charger_switch_work, charger_work_cycle);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int gt1x_suspend(void)
|
|
{
|
|
s32 ret = -1;
|
|
#if GTP_HOTKNOT && !HOTKNOT_BLOCK_RW
|
|
u8 buf[1] = { 0 };
|
|
#endif
|
|
|
|
if (update_info.status) {
|
|
return 0;
|
|
}
|
|
#if GTP_SMART_COVER
|
|
if (gt1x_sc_dev) {
|
|
gt1x_sc_dev->suspended = 1;
|
|
}
|
|
#endif
|
|
GTP_INFO("Suspend start...");
|
|
#if GTP_PROXIMITY
|
|
if (gt1x_ps_dev && gt1x_ps_dev->enabled) {
|
|
GTP_INFO("proximity is detected!");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if GTP_HOTKNOT
|
|
if (hotknot_enabled) {
|
|
#if HOTKNOT_BLOCK_RW
|
|
if (hotknot_paired_flag) {
|
|
GTP_INFO("hotknot is paired!");
|
|
return 0;
|
|
}
|
|
#else
|
|
ret = gt1x_i2c_read_dbl_check(GTP_REG_HN_PAIRED, buf, sizeof(buf));
|
|
if ((!ret && buf[0] == 0x55) || hotknot_transfer_mode) {
|
|
GTP_DEBUG("0x81AA: 0x%02X", buf[0]);
|
|
GTP_INFO("hotknot is paired!");
|
|
return 0;
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
gt1x_halt = 1;
|
|
#if GTP_ESD_PROTECT
|
|
gt1x_esd_switch(SWITCH_OFF);
|
|
#endif
|
|
#if GTP_CHARGER_SWITCH
|
|
gt1x_charger_switch(SWITCH_OFF);
|
|
#endif
|
|
gt1x_irq_disable();
|
|
|
|
#if GTP_GESTURE_WAKEUP
|
|
gesture_clear_wakeup_data();
|
|
if (gesture_enabled) {
|
|
gesture_enter_doze();
|
|
gt1x_irq_enable();
|
|
gt1x_halt = 0;
|
|
} else
|
|
#endif
|
|
{
|
|
ret = gt1x_enter_sleep();
|
|
if (ret < 0) {
|
|
GTP_ERROR("Suspend failed.");
|
|
}
|
|
}
|
|
|
|
/* to avoid waking up while not sleeping
|
|
delay 48 + 10ms to ensure reliability */
|
|
msleep(58);
|
|
GTP_INFO("Suspend end...");
|
|
return 0;
|
|
}
|
|
|
|
int gt1x_resume(void)
|
|
{
|
|
s32 ret = -1;
|
|
|
|
if (update_info.status) {
|
|
return 0;
|
|
}
|
|
|
|
#if GTP_SMART_COVER
|
|
if (gt1x_sc_dev) {
|
|
gt1x_sc_dev->suspended = 0;
|
|
}
|
|
#endif
|
|
GTP_DEBUG("Resume start...");
|
|
|
|
#if GTP_PROXIMITY
|
|
if (gt1x_ps_dev && gt1x_ps_dev->enabled) {
|
|
GTP_INFO("Proximity is on!");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if GTP_HOTKNOT
|
|
if (hotknot_enabled) {
|
|
#if HOTKNOT_BLOCK_RW
|
|
if (hotknot_paired_flag) {
|
|
hotknot_paired_flag = 0;
|
|
GTP_INFO("Hotknot is paired!");
|
|
return 0;
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if GTP_GESTURE_WAKEUP
|
|
/* just return 0 if IC does not suspend */
|
|
if (!gesture_enabled && !gt1x_halt)
|
|
return 0;
|
|
#else
|
|
if (!gt1x_halt)
|
|
return 0;
|
|
#endif
|
|
|
|
ret = gt1x_wakeup_sleep();
|
|
if (ret < 0) {
|
|
GTP_ERROR("Resume failed.");
|
|
}
|
|
#if GTP_HOTKNOT
|
|
if (!hotknot_enabled) {
|
|
gt1x_send_cmd(GTP_CMD_HN_EXIT_SLAVE, 0);
|
|
}
|
|
#endif
|
|
|
|
#if GTP_CHARGER_SWITCH
|
|
gt1x_charger_config(0);
|
|
gt1x_charger_switch(SWITCH_ON);
|
|
#endif
|
|
|
|
gt1x_halt = 0;
|
|
gt1x_irq_enable();
|
|
|
|
#if GTP_ESD_PROTECT
|
|
gt1x_esd_switch(SWITCH_ON);
|
|
#endif
|
|
|
|
GTP_DEBUG("Resume end.");
|
|
return 0;
|
|
}
|
|
|
|
s32 gt1x_init(void)
|
|
{
|
|
s32 ret = -1;
|
|
s32 retry = 0;
|
|
u8 reg_val[1];
|
|
|
|
/* power on */
|
|
gt1x_power_switch(SWITCH_ON);
|
|
|
|
while (retry++ < 5) {
|
|
gt1x_init_failed = 0;
|
|
/* reset ic */
|
|
ret = gt1x_reset_guitar();
|
|
if (ret != 0) {
|
|
GTP_ERROR("Reset guitar failed!");
|
|
continue;
|
|
}
|
|
|
|
/* check main system firmware */
|
|
ret = gt1x_i2c_read_dbl_check(GTP_REG_FW_CHK_MAINSYS, reg_val, 1);
|
|
if (ret != 0) {
|
|
continue;
|
|
} else if (reg_val[0] != 0xBE) {
|
|
GTP_ERROR("Check main system not pass[0x%2X].", reg_val[0]);
|
|
gt1x_init_failed = 1;
|
|
}
|
|
|
|
#if !GTP_AUTO_UPDATE
|
|
/* debug info */
|
|
ret = gt1x_i2c_read_dbl_check(GTP_REG_FW_CHK_SUBSYS, reg_val, 1);
|
|
if (!ret && reg_val[0] == 0xAA) {
|
|
GTP_ERROR("Check subsystem not pass[0x%2X].", reg_val[0]);
|
|
}
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
/* if the initialization fails, set default setting */
|
|
ret |= gt1x_init_failed;
|
|
if (ret) {
|
|
GTP_ERROR("Init failed, use default setting");
|
|
gt1x_abs_x_max = GTP_MAX_WIDTH;
|
|
gt1x_abs_y_max = GTP_MAX_HEIGHT;
|
|
gt1x_int_type = GTP_INT_TRIGGER;
|
|
gt1x_wakeup_level = GTP_WAKEUP_LEVEL;
|
|
}
|
|
|
|
/* get chip type */
|
|
ret = gt1x_get_chip_type();
|
|
if (ret != 0) {
|
|
GTP_ERROR("Get chip type failed!");
|
|
}
|
|
|
|
/* read version information */
|
|
ret = gt1x_read_version(>1x_version);
|
|
if (ret != 0) {
|
|
GTP_ERROR("Get verision failed!");
|
|
}
|
|
|
|
/* init and send configs */
|
|
ret = gt1x_init_panel();
|
|
if (ret != 0) {
|
|
GTP_ERROR("Init panel failed.");
|
|
}
|
|
|
|
gt1x_workqueue = create_singlethread_workqueue("gt1x_workthread");
|
|
if (gt1x_workqueue == NULL) {
|
|
GTP_ERROR("Create workqueue failed!");
|
|
}
|
|
|
|
/* init auxiliary node and functions */
|
|
#if GTP_DEBUG_NODE
|
|
gt1x_init_debug_node();
|
|
#endif
|
|
|
|
#if GTP_CREATE_WR_NODE
|
|
gt1x_init_tool_node();
|
|
#endif
|
|
|
|
#if GTP_GESTURE_WAKEUP || GTP_HOTKNOT
|
|
gt1x_init_node();
|
|
#endif
|
|
|
|
#if GTP_PROXIMITY
|
|
gt1x_ps_init();
|
|
#endif
|
|
|
|
#if GTP_CHARGER_SWITCH
|
|
gt1x_init_charger();
|
|
gt1x_charger_config(1);
|
|
gt1x_charger_switch(SWITCH_ON);
|
|
#endif
|
|
|
|
#if GTP_SMART_COVER
|
|
gt1x_smart_cover_init();
|
|
#endif
|
|
|
|
#if GTP_WITH_STYLUS
|
|
gt1x_pen_init();
|
|
#endif
|
|
if (ret != 0)
|
|
gt1x_power_switch(SWITCH_OFF);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void gt1x_deinit(void)
|
|
{
|
|
#if GTP_DEBUG_NODE
|
|
gt1x_deinit_debug_node();
|
|
#endif
|
|
|
|
#if GTP_GESTURE_WAKEUP || GTP_HOTKNOT
|
|
gt1x_deinit_node();
|
|
#endif
|
|
|
|
#if GTP_CREATE_WR_NODE
|
|
gt1x_deinit_tool_node();
|
|
#endif
|
|
|
|
#if GTP_ESD_PROTECT
|
|
gt1x_deinit_esd_protect();
|
|
#endif
|
|
|
|
#if GTP_CHARGER_SWITCH
|
|
gt1x_charger_switch(SWITCH_OFF);
|
|
#endif
|
|
|
|
#if GTP_PROXIMITY
|
|
gt1x_ps_deinit();
|
|
#endif
|
|
|
|
#if GTP_SMART_COVER
|
|
gt1x_smart_cover_deinit();
|
|
#endif
|
|
|
|
if (sysfs_rootdir) {
|
|
kobject_del(sysfs_rootdir);
|
|
sysfs_rootdir = NULL;
|
|
}
|
|
|
|
if (gt1x_workqueue) {
|
|
destroy_workqueue(gt1x_workqueue);
|
|
}
|
|
|
|
}
|
|
|