834 lines
21 KiB
Plaintext
834 lines
21 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2023 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
#include <dt-bindings/display/media-bus-format.h>
|
|
|
|
/ {
|
|
max96722_dphy0_osc0: max96722-dphy0-oscillator@0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <1>;
|
|
clock-frequency = <25000000>;
|
|
clock-output-names = "max96722-dphy0-osc0";
|
|
};
|
|
|
|
max96722_dphy0_vcc1v2: max96722-dphy0-vcc1v2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "max96722_dphy0_vcc1v2";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
startup-delay-us = <850>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
max96722_dphy0_vcc1v8: max96722-dphy0-vcc1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "max96722_dphy0_vcc1v8";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
startup-delay-us = <200>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
max96722_dphy0_pwdn_regulator: max96722-dphy0-pwdn-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "max96722_dphy0_pwdn";
|
|
gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max96722_dphy0_pwdn>;
|
|
enable-active-high;
|
|
startup-delay-us = <10000>;
|
|
off-on-delay-us = <5000>;
|
|
vin-supply = <&max96722_dphy0_vcc1v8>;
|
|
};
|
|
|
|
max96722_dphy0_poc_regulator: max96722-dphy0-poc-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "max96722_dphy0_poc";
|
|
gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
startup-delay-us = <10000>;
|
|
off-on-delay-us = <5000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
};
|
|
|
|
&csi2_dphy0_hw {
|
|
status = "okay";
|
|
};
|
|
|
|
&csi2_dphy0 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi_dphy0_in_max96722: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&max96722_dphy0_out>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
csidphy0_out: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mipi2_csi2_input>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c7m3_xfer>;
|
|
|
|
max96722_dphy0: max96722@29 {
|
|
compatible = "maxim4c,max96722";
|
|
status = "okay";
|
|
reg = <0x29>;
|
|
clock-names = "xvclk";
|
|
clocks = <&max96722_dphy0_osc0 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&max96722_dphy0_errb>, <&max96722_dphy0_lock>;
|
|
power-domains = <&power RK3588_PD_VI>;
|
|
rockchip,grf = <&sys_grf>;
|
|
vcc1v2-supply = <&max96722_dphy0_vcc1v2>;
|
|
vcc1v8-supply = <&max96722_dphy0_vcc1v8>;
|
|
pwdn-supply = <&max96722_dphy0_pwdn_regulator>;
|
|
lock-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
|
|
port {
|
|
max96722_dphy0_out: endpoint {
|
|
remote-endpoint = <&mipi_dphy0_in_max96722>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
|
|
/* support mode config start */
|
|
support-mode-config {
|
|
status = "okay";
|
|
|
|
bus-format = <MEDIA_BUS_FMT_UYVY8_2X8>;
|
|
sensor-width = <1280>;
|
|
sensor-height = <800>;
|
|
max-fps-numerator = <10000>;
|
|
max-fps-denominator = <300000>;
|
|
bpp = <16>;
|
|
link-freq-idx = <20>;
|
|
};
|
|
/* support mode config end */
|
|
|
|
/* serdes local device start */
|
|
serdes-local-device {
|
|
status = "okay";
|
|
|
|
/* GMSL LINK config start */
|
|
gmsl-links {
|
|
status = "okay";
|
|
|
|
link-vdd-ldo1-en = <1>;
|
|
link-vdd-ldo2-en = <1>;
|
|
|
|
// Link A: link-id = 0
|
|
gmsl-link-config-0 {
|
|
status = "okay";
|
|
link-id = <0>; // Link ID: 0/1/2/3
|
|
|
|
link-type = <0>;
|
|
link-rx-rate = <0>;
|
|
link-tx-rate = <0>;
|
|
|
|
link-remote-cam = <&max96722_dphy0_cam0>; // remote camera
|
|
|
|
link-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
14 D1 03 00 00 // VGAHiGain
|
|
14 45 00 00 00 // Disable SSC
|
|
0B 06 ef 00 00 // HIM on
|
|
0B 07 84 00 00 // Enable HVEN and DBL
|
|
0B 0F 01 00 00 // Disable processing DE signals
|
|
];
|
|
};
|
|
};
|
|
|
|
// Link B: link-id = 1
|
|
gmsl-link-config-1 {
|
|
status = "okay";
|
|
link-id = <1>; // Link ID: 0/1/2/3
|
|
|
|
link-type = <0>;
|
|
link-rx-rate = <0>;
|
|
link-tx-rate = <0>;
|
|
|
|
link-remote-cam = <&max96722_dphy0_cam1>; // remote camera
|
|
|
|
link-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
15 D1 03 00 00 // VGAHiGain
|
|
15 45 00 00 00 // Disable SSC
|
|
0C 06 ef 00 00 // HIM on
|
|
0C 07 84 00 00 // Enable HVEN and DBL
|
|
0C 0F 01 00 00 // Disable processing DE signals
|
|
];
|
|
};
|
|
};
|
|
|
|
// Link C: link-id = 2
|
|
gmsl-link-config-2 {
|
|
status = "okay";
|
|
link-id = <2>; // Link ID: 0/1/2/3
|
|
|
|
link-type = <0>;
|
|
link-rx-rate = <0>;
|
|
link-tx-rate = <0>;
|
|
|
|
link-remote-cam = <&max96722_dphy0_cam2>; // remote camera
|
|
|
|
link-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
16 D1 03 00 00 // VGAHiGain
|
|
16 45 00 00 00 // Disable SSC
|
|
0D 06 ef 00 00 // HIM on
|
|
0D 07 84 00 00 // Enable HVEN and DBL
|
|
0D 0F 01 00 00 // Disable processing DE signals
|
|
];
|
|
};
|
|
};
|
|
|
|
// Link D: link-id = 3
|
|
gmsl-link-config-3 {
|
|
status = "okay";
|
|
link-id = <3>; // Link ID: 0/1/2/3
|
|
|
|
link-type = <0>;
|
|
link-rx-rate = <0>;
|
|
link-tx-rate = <0>;
|
|
|
|
link-remote-cam = <&max96722_dphy0_cam3>; // remote camera
|
|
|
|
link-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
17 D1 03 00 00 // VGAHiGain
|
|
17 45 00 00 00 // Disable SSC
|
|
0E 06 ef 00 00 // HIM on
|
|
0E 07 84 00 00 // Enable HVEN and DBL
|
|
0E 0F 01 00 00 // Disable processing DE signals
|
|
];
|
|
};
|
|
};
|
|
};
|
|
/* GMSL LINK config end */
|
|
|
|
/* VIDEO PIPE config start */
|
|
video-pipes {
|
|
status = "okay";
|
|
|
|
// Video Pipe 0
|
|
video-pipe-config-0 {
|
|
status = "okay";
|
|
pipe-id = <0>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
|
|
|
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
|
link-idx = <0>; // Link A/B/C/D: 0/1/2/3
|
|
|
|
pipe-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// Send YUV422, FS, and FE from Video Pipe 0 to Controller 1
|
|
09 0B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
|
09 2D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
|
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
|
09 0D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
|
09 0E 1e 00 00 // DST0 VC = 0, DT = YUV422 8bit
|
|
09 0F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
|
09 10 00 00 00 // DST1 VC = 0, DT = Frame Start
|
|
09 11 01 00 00 // SRC2 VC = 0, DT = Frame End
|
|
09 12 01 00 00 // DST2 VC = 0, DT = Frame End
|
|
];
|
|
};
|
|
};
|
|
|
|
// Video Pipe 1
|
|
video-pipe-config-1 {
|
|
status = "okay";
|
|
pipe-id = <1>; // Video Pipe 1: pipe-id = 1
|
|
|
|
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
|
link-idx = <1>; // Link A/B/C/D: 0/1/2/3
|
|
|
|
pipe-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// Send YUV422, FS, and FE from Video Pipe 1 to Controller 1
|
|
09 4B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
|
09 6D 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
|
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
|
09 4D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
|
09 4E 5e 00 00 // DST0 VC = 1, DT = YUV422 8bit
|
|
09 4F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
|
09 50 40 00 00 // DST1 VC = 1, DT = Frame Start
|
|
09 51 01 00 00 // SRC2 VC = 0, DT = Frame End
|
|
09 52 41 00 00 // DST2 VC = 1, DT = Frame End
|
|
];
|
|
};
|
|
};
|
|
|
|
// Video Pipe 2
|
|
video-pipe-config-2 {
|
|
status = "okay";
|
|
pipe-id = <2>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
|
|
|
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
|
link-idx = <2>; // Link A/B/C/D: 0/1/2/3
|
|
|
|
pipe-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// Send YUV422, FS, and FE from Video Pipe 2 to Controller 1
|
|
09 8B 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
|
09 AD 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
|
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
|
09 8D 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
|
09 8E 9e 00 00 // DST0 VC = 2, DT = YUV422 8bit
|
|
09 8F 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
|
09 90 80 00 00 // DST1 VC = 2, DT = Frame Start
|
|
09 91 01 00 00 // SRC2 VC = 0, DT = Frame End
|
|
09 92 81 00 00 // DST2 VC = 2, DT = Frame End
|
|
];
|
|
};
|
|
};
|
|
|
|
// Video Pipe 3
|
|
video-pipe-config-3 {
|
|
status = "okay";
|
|
pipe-id = <3>; // Video Pipe ID: 0/1/2/3/4/5/6/7
|
|
|
|
pipe-idx = <0>; // Video Pipe X/Y/Z/U: 0/1/2/3
|
|
link-idx = <3>; // Link A/B/C/D: 0/1/2/3
|
|
|
|
pipe-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// Send YUV422, FS, and FE from Video Pipe 3 to Controller 1
|
|
09 CB 07 00 00 // Enable 0/1/2 SRC/DST Mappings
|
|
09 ED 15 00 00 // SRC/DST 0/1/2 -> CSI2 Controller 1;
|
|
// For the following MSB 2 bits = VC, LSB 6 bits = DT
|
|
09 CD 1e 00 00 // SRC0 VC = 0, DT = YUV422 8bit
|
|
09 CE de 00 00 // DST0 VC = 3, DT = YUV422 8bit
|
|
09 CF 00 00 00 // SRC1 VC = 0, DT = Frame Start
|
|
09 D0 c0 00 00 // DST1 VC = 3, DT = Frame Start
|
|
09 D1 01 00 00 // SRC2 VC = 0, DT = Frame End
|
|
09 D2 c1 00 00 // DST2 VC = 3, DT = Frame End
|
|
];
|
|
};
|
|
};
|
|
|
|
// Software override for parallel mode
|
|
parallel-mode-config {
|
|
status = "okay";
|
|
|
|
parallel-init-sequence {
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// Enable software override for all pipes since GMSL1 data is parallel mode, bpp=8, dt=0x1e(yuv-8)
|
|
04 1A f0 00 00 // pipe 0/1/2/3: Enable YUV8-/10-bit mux mode
|
|
04 0B 40 00 00 // pipe 0 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
|
04 0C 00 00 00 // pipe 0 and 1 VC software override: 0x00
|
|
04 0D 00 00 00 // pipe 2 and 3 VC software override: 0x00
|
|
04 0E 5e 00 00 // pipe 0 DT=0x1E: YUV422 8-bit
|
|
04 0F 7e 00 00 // pipe 1 DT=0x1E: YUV422 8-bit
|
|
04 10 7a 00 00 // pipe 2 DT=0x1E, pipe 3 DT=0x1E: YUV422 8-bit
|
|
04 11 48 00 00 // pipe 1 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
|
04 12 20 00 00 // pipe 2 bpp=0x08, pipe 3 bpp=0x08: Datatypes = 0x2A, 0x10-12, 0x31-37
|
|
04 15 c0 c0 00 // pipe 0/1 enable software overide
|
|
04 18 c0 c0 00 // pipe 2/3 enable software overide
|
|
];
|
|
};
|
|
};
|
|
};
|
|
/* VIDEO PIPE config end */
|
|
|
|
/* MIPI TXPHY config start */
|
|
mipi-txphys {
|
|
status = "okay";
|
|
|
|
phy-mode = <0>;
|
|
phy-force-clock-out = <1>;
|
|
phy-force-clk0-en = <1>;
|
|
phy-force-clk3-en = <0>;
|
|
|
|
// MIPI TXPHY A: phy-id = 0
|
|
mipi-txphy-config-0 {
|
|
status = "okay";
|
|
phy-id = <0>; // MIPI TXPHY ID: 0/1/2/3
|
|
|
|
phy-type = <0>;
|
|
auto-deskew = <0x80>;
|
|
data-lane-num = <4>;
|
|
data-lane-map = <0x4>;
|
|
vc-ext-en = <0>;
|
|
};
|
|
|
|
// MIPI TXPHY B: phy-id = 1
|
|
mipi-txphy-config-1 {
|
|
status = "okay";
|
|
phy-id = <1>; // MIPI TXPHY ID: 0/1/2/3
|
|
|
|
phy-type = <0>;
|
|
auto-deskew = <0x80>;
|
|
data-lane-num = <4>;
|
|
data-lane-map = <0xe>;
|
|
vc-ext-en = <0>;
|
|
};
|
|
};
|
|
/* MIPI TXPHY config end */
|
|
|
|
/* local device extra init sequence */
|
|
extra-init-sequence {
|
|
status = "disabled";
|
|
|
|
seq-item-size = <5>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <2>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
// common init sequence such as fsync / gpio and so on
|
|
];
|
|
};
|
|
};
|
|
/* serdes local device end */
|
|
|
|
/* i2c-mux start */
|
|
i2c-mux {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
// Note: Serializer node defined before camera node
|
|
max96722_dphy0_ser0: max96715@41 {
|
|
compatible = "maxim,ser,max96715";
|
|
reg = <0x41>;
|
|
|
|
ser-i2c-addr-def = <0x40>;
|
|
|
|
ser-init-sequence {
|
|
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
07 84 00 00
|
|
67 c4 00 00
|
|
0F bf 00 00
|
|
3F 08 00 00
|
|
40 2d 00 00
|
|
20 10 00 00
|
|
21 11 00 00
|
|
22 12 00 00
|
|
23 13 00 00
|
|
24 14 00 00
|
|
25 15 00 00
|
|
26 16 00 00
|
|
27 17 00 00
|
|
30 00 00 00
|
|
31 01 00 00
|
|
32 02 00 00
|
|
33 03 00 00
|
|
34 04 00 00
|
|
35 05 00 00
|
|
36 06 00 00
|
|
37 07 00 00
|
|
];
|
|
};
|
|
};
|
|
|
|
max96722_dphy0_cam0: ox01f10@31 {
|
|
compatible = "maxim,ovti,ox01f10";
|
|
reg = <0x31>;
|
|
|
|
cam-i2c-addr-def = <0x36>;
|
|
|
|
cam-remote-ser = <&max96722_dphy0_ser0>; // remote serializer
|
|
|
|
poc-supply = <&max96722_dphy0_poc_regulator>;
|
|
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
|
|
/* port config start */
|
|
port {
|
|
max96722_dphy0_cam0_out: endpoint {
|
|
/* remote endpoint: rkcif_mipi_lvds_sditf */
|
|
//remote-endpoint = <&mipi_lvds_sditf_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
/* port config end */
|
|
};
|
|
};
|
|
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
// Note: Serializer node defined before camera node
|
|
max96722_dphy0_ser1: max96715@42 {
|
|
compatible = "maxim,ser,max96715";
|
|
reg = <0x42>;
|
|
|
|
ser-i2c-addr-def = <0x40>;
|
|
|
|
ser-init-sequence {
|
|
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
07 84 00 00
|
|
67 c4 00 00
|
|
0F bf 00 00
|
|
3F 08 00 00
|
|
40 2d 00 00
|
|
20 10 00 00
|
|
21 11 00 00
|
|
22 12 00 00
|
|
23 13 00 00
|
|
24 14 00 00
|
|
25 15 00 00
|
|
26 16 00 00
|
|
27 17 00 00
|
|
30 00 00 00
|
|
31 01 00 00
|
|
32 02 00 00
|
|
33 03 00 00
|
|
34 04 00 00
|
|
35 05 00 00
|
|
36 06 00 00
|
|
37 07 00 00
|
|
];
|
|
};
|
|
};
|
|
|
|
max96722_dphy0_cam1: ox01f10@32 {
|
|
compatible = "maxim,ovti,ox01f10";
|
|
reg = <0x32>;
|
|
|
|
cam-i2c-addr-def = <0x36>;
|
|
|
|
cam-remote-ser = <&max96722_dphy0_ser1>; // remote serializer
|
|
|
|
poc-supply = <&max96722_dphy0_poc_regulator>;
|
|
|
|
rockchip,camera-module-index = <0>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
|
|
/* port config start */
|
|
port {
|
|
max96722_dphy0_cam1_out: endpoint {
|
|
/* remote endpoint: rkcif_mipi_lvds_sditf_vir1 */
|
|
//remote-endpoint = <&mipi_lvds_sditf_vir1_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
/* port config end */
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
// Note: Serializer node defined before camera node
|
|
max96722_dphy0_ser2: max96715@43 {
|
|
compatible = "maxim,ser,max96715";
|
|
reg = <0x43>;
|
|
|
|
ser-i2c-addr-def = <0x40>;
|
|
|
|
ser-init-sequence {
|
|
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
07 84 00 00
|
|
67 c4 00 00
|
|
0F bf 00 00
|
|
3F 08 00 00
|
|
40 2d 00 00
|
|
20 10 00 00
|
|
21 11 00 00
|
|
22 12 00 00
|
|
23 13 00 00
|
|
24 14 00 00
|
|
25 15 00 00
|
|
26 16 00 00
|
|
27 17 00 00
|
|
30 00 00 00
|
|
31 01 00 00
|
|
32 02 00 00
|
|
33 03 00 00
|
|
34 04 00 00
|
|
35 05 00 00
|
|
36 06 00 00
|
|
37 07 00 00
|
|
];
|
|
};
|
|
};
|
|
|
|
max96722_dphy0_cam2: ox01f10@33 {
|
|
compatible = "maxim,ovti,ox01f10";
|
|
reg = <0x33>;
|
|
|
|
cam-i2c-addr-def = <0x36>;
|
|
|
|
cam-remote-ser = <&max96722_dphy0_ser2>; // remote serializer
|
|
|
|
poc-supply = <&max96722_dphy0_poc_regulator>;
|
|
|
|
rockchip,camera-module-index = <2>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
|
|
/* port config start */
|
|
port {
|
|
max96722_dphy0_cam2_out: endpoint {
|
|
/* remote endpoint: rkcif_mipi_lvds_sditf_vir2 */
|
|
//remote-endpoint = <&mipi_lvds_sditf_vir2_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
/* port config end */
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
// Note: Serializer node defined before camera node
|
|
max96722_dphy0_ser3: max96715@44 {
|
|
compatible = "maxim,ser,max96715";
|
|
reg = <0x44>;
|
|
|
|
ser-i2c-addr-def = <0x40>;
|
|
|
|
ser-init-sequence {
|
|
seq-item-size = <4>; // reg-addr-len + reg-val-len * 2 + 1
|
|
reg-addr-len = <1>; // 1: 8bits, 2: 16bits
|
|
reg-val-len = <1>; // 1: 8bits, 2: 16bits, 3: 24bits
|
|
|
|
// reg_addr reg_val val_mask delay
|
|
init-sequence = [
|
|
07 84 00 00
|
|
67 c4 00 00
|
|
0F bf 00 00
|
|
3F 08 00 00
|
|
40 2d 00 00
|
|
20 10 00 00
|
|
21 11 00 00
|
|
22 12 00 00
|
|
23 13 00 00
|
|
24 14 00 00
|
|
25 15 00 00
|
|
26 16 00 00
|
|
27 17 00 00
|
|
30 00 00 00
|
|
31 01 00 00
|
|
32 02 00 00
|
|
33 03 00 00
|
|
34 04 00 00
|
|
35 05 00 00
|
|
36 06 00 00
|
|
37 07 00 00
|
|
];
|
|
};
|
|
};
|
|
|
|
max96722_dphy0_cam3: ox01f10@34 {
|
|
compatible = "maxim,ovti,ox01f10";
|
|
reg = <0x34>;
|
|
|
|
cam-i2c-addr-def = <0x36>;
|
|
|
|
cam-remote-ser = <&max96722_dphy0_ser3>; // remote serializer
|
|
|
|
poc-supply = <&max96722_dphy0_poc_regulator>;
|
|
|
|
rockchip,camera-module-index = <3>;
|
|
rockchip,camera-module-facing = "back";
|
|
rockchip,camera-module-name = "default";
|
|
rockchip,camera-module-lens-name = "default";
|
|
|
|
/* port config start */
|
|
port {
|
|
max96722_dphy0_cam3_out: endpoint {
|
|
/* remote endpoint: rkcif_mipi_lvds_sditf_vir3 */
|
|
//remote-endpoint = <&mipi_lvds_sditf_vir3_in>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
/* port config end */
|
|
};
|
|
};
|
|
};
|
|
/* i2c-mux end */
|
|
};
|
|
};
|
|
|
|
&mipi2_csi2 {
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi2_csi2_input: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&csidphy0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mipi2_csi2_output: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&cif_mipi2_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkcif_mipi_lvds2 {
|
|
status = "okay";
|
|
/* parameters for do cif reset detecting:
|
|
* index0: monitor mode,
|
|
0 for idle,
|
|
1 for continue,
|
|
2 for trigger,
|
|
3 for hotplug (for nextchip)
|
|
* index1: the frame id to start timer,
|
|
min is 2
|
|
* index2: frame num of monitoring cycle
|
|
* index3: err time for keep monitoring
|
|
after finding out err (ms)
|
|
* index4: csi2 err reference val for resetting
|
|
*/
|
|
rockchip,cif-monitor = <3 2 1 1000 5>;
|
|
|
|
port {
|
|
cif_mipi2_in: endpoint {
|
|
remote-endpoint = <&mipi2_csi2_output>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rkcif {
|
|
status = "okay";
|
|
rockchip,android-usb-camerahal-enable;
|
|
};
|
|
|
|
&rkcif_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
max96722-dphy0 {
|
|
max96722_dphy0_pwdn: max96722-dphy0-pwdn {
|
|
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_output_low>;
|
|
};
|
|
|
|
max96722_dphy0_errb: max96722-dphy0-errb {
|
|
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none_smt>;
|
|
};
|
|
|
|
max96722_dphy0_lock: max96722-dphy0-lock {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none_smt>;
|
|
};
|
|
};
|
|
};
|