756 lines
14 KiB
Plaintext
756 lines
14 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
#include "dt-bindings/usb/pd.h"
|
|
#include "rk3588.dtsi"
|
|
#include "rk3588-blueberry.dtsi"
|
|
#include "rk3588-rk806-single.dtsi"
|
|
|
|
/ {
|
|
/* If hdmirx node is disabled, delete the reserved-memory node here. */
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* Reserve 256MB memory for hdmirx-controller@fdee0000 */
|
|
cma {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
reg = <0x0 (256 * 0x100000) 0x0 (256 * 0x100000)>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
|
|
hdmiin-sound {
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,mclk-fs = <128>;
|
|
rockchip,format = "i2s";
|
|
rockchip,bitclock-master = <&hdmirx_ctrler>;
|
|
rockchip,frame-master = <&hdmirx_ctrler>;
|
|
rockchip,card-name = "rockchip-hdmiin";
|
|
rockchip,cpu = <&i2s7_8ch>;
|
|
rockchip,codec = <&hdmirx_ctrler 0>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
wifi_led: wifi-led {
|
|
gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
hdd_led: hdd-led {
|
|
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
eth_led: eth-led {
|
|
gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
work_led: work-led {
|
|
gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwrbtn>;
|
|
|
|
power {
|
|
debounce-interval = <100>;
|
|
gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
|
|
label = "GPIO Key Power";
|
|
linux,code = <KEY_POWER>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
pcie30_avdd0v75: pcie30-avdd0v75 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd0v75";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
vin-supply = <&vdd_0v75_s0>;
|
|
};
|
|
|
|
pcie30_avdd1v8: pcie30-avdd1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd1v8";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&avcc_1v8_s0>;
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
};
|
|
|
|
vcc5v0_otg: vcc5v0-otg-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_otg";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_otg_en>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
wireless_bluetooth: wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&hym8563>;
|
|
clock-names = "ext_clock";
|
|
uart_rts_gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart6m1_rtsn>, <&bt_gpio>;
|
|
pinctrl-1 = <&uart6_gpios>;
|
|
BT,reset_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless_wlan: wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
wifi_chip_type = "ap6275p";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_irq>, <&wifi_poweren_gpio>;
|
|
WIFI,host_wake_irq = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
WIFI,poweren_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0 {
|
|
status = "disable";
|
|
};
|
|
|
|
//&dp0_in_vp1 {
|
|
// status = "okay";
|
|
//};
|
|
|
|
&dp1 {
|
|
pinctrl-0 = <&dp1m0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&dp1_in_vp1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp1_sound{
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac0 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
|
|
tx_delay = <0x44>;
|
|
/* rx_delay = <0x4f>; */
|
|
|
|
phy-handle = <&rgmii_phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
cec-enable = "true" ;
|
|
hdcp1x-enable;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1 {
|
|
enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
cec-enable = "true" ;
|
|
hdcp1x-enable;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Should work with at least 128MB cma reserved above. */
|
|
&hdmirx_ctrler {
|
|
status = "okay";
|
|
|
|
#sound-dai-cells = <1>;
|
|
/* Effective level used to trigger HPD: 0-low, 1-high */
|
|
hpd-trigger-level = <1>;
|
|
hdmirx-det-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; //gpio1_d5
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
|
compatible = "rockchip,rk8603";
|
|
reg = <0x43>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5m3_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "okay";
|
|
usbc0: fusb302@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vcc5v0_otg>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hym8563: hym8563@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "hym8563";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
//hdmi01 sound
|
|
&i2s5_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
//hdmi02 sound
|
|
&i2s6_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
//hdmiin sound
|
|
&i2s7_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
rockchip,skip-scan-in-resume;
|
|
status = "okay";
|
|
};
|
|
|
|
&rk806single {
|
|
pinctrl-names = "default", "pmic-power-off";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
pinctrl-1 = <&rk806_dvs1_slp>, <&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
regulators {
|
|
avcc_1v8_s0: PLDO_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "avcc_1v8_s0";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdd_log_s0 { //fox.luo@2022.05.26 don't wake up
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
status = "okay";
|
|
rockchip,sleep-debug-en = <1>;
|
|
rockchip,virtual-poweroff = <1>;
|
|
rockchip,sleep-mode-config = <
|
|
(0
|
|
| RKPM_SLP_ARMOFF_DDRPD
|
|
)
|
|
>;
|
|
rockchip,wakeup-config = <
|
|
(0
|
|
| RKPM_CPU0_WKUP_EN
|
|
| RKPM_GPIO_WKUP_EN
|
|
)
|
|
>;
|
|
};
|
|
|
|
&route_hdmi0 {
|
|
status = "okay";
|
|
connect = <&vp0_out_hdmi0>;
|
|
};
|
|
|
|
&route_hdmi1 {
|
|
status = "okay";
|
|
connect = <&vp2_out_hdmi1>;
|
|
};
|
|
|
|
&sata0 {
|
|
status = "okay";
|
|
};
|
|
|
|
//rs485
|
|
&uart0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0m2_xfer>;
|
|
};
|
|
|
|
//rs232
|
|
&uart3 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3m2_xfer>;
|
|
};
|
|
|
|
&uart6 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&pinctrl {
|
|
|
|
|
|
wireless-bluetooth {
|
|
uart6_gpios: uart6-gpios {
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_gpio: bt-gpio {
|
|
rockchip,pins =
|
|
<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
wifi_poweren_gpio: wifi-poweren-gpio {
|
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
buttons {
|
|
pwrbtn: pwrbtn {
|
|
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
};
|
|
|
|
usb-typec {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
vcc5v0_otg_en: vcc5v0-otg-en {
|
|
rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
//type-c0
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
//usb2.0 host0
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
//usb2.0 host1
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
rockchip,typec-vbus-det;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
orientation-switch;
|
|
svid = <0xff01>;
|
|
sbu1-dc-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdp_phy0_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1 {
|
|
rockchip,dp-lane-mux = < 0 1 2 3 >;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1_u3 {
|
|
maximum-speed = "high-speed";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
status = "okay";
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
dr_mode = "host";
|
|
maximum-speed = "high-speed";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbhost3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbhost_dwc3_0 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&vdd_vdenc_s0 {
|
|
regulator-init-microvolt = <750000>;
|
|
};
|
|
|