718 lines
15 KiB
Plaintext
718 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
|
* Copyright (c) 2021 Radxa Limited.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/input/rk-input.h>
|
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
|
#include <dt-bindings/sensor-dev.h>
|
|
#include "rk3568.dtsi"
|
|
|
|
/ {
|
|
compatible = "radxa,rock-3-compute-module-plus", "rockchip,rk3568";
|
|
|
|
fiq_debugger: fiq-debugger {
|
|
compatible = "rockchip,fiq-debugger";
|
|
rockchip,serial-id = <2>;
|
|
rockchip,wake-irq = <0>;
|
|
/* If enable uart uses irq instead of fiq */
|
|
rockchip,irq-mode-enable = <1>;
|
|
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
|
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
debug: debug@fd904000 {
|
|
compatible = "rockchip,debug";
|
|
reg = <0x0 0xfd904000 0x0 0x1000>,
|
|
<0x0 0xfd905000 0x0 0x1000>,
|
|
<0x0 0xfd906000 0x0 0x1000>,
|
|
<0x0 0xfd907000 0x0 0x1000>;
|
|
};
|
|
|
|
cspmu: cspmu@fd90c000 {
|
|
compatible = "rockchip,cspmu";
|
|
reg = <0x0 0xfd90c000 0x0 0x1000>,
|
|
<0x0 0xfd90d000 0x0 0x1000>,
|
|
<0x0 0xfd90e000 0x0 0x1000>,
|
|
<0x0 0xfd90f000 0x0 0x1000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
rknpu_reserved: rknpu {
|
|
compatible = "shared-dma-pool";
|
|
inactive;
|
|
reusable;
|
|
size = <0x0 0x20000000>;
|
|
alignment = <0x0 0x1000>;
|
|
};
|
|
};
|
|
|
|
rk809_sound: rk809-sound {
|
|
status = "disabled";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "rockchip,rk809-codec";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rk809_codec>;
|
|
};
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vcc3v3_sys: vcc3v3-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; //WIFI_REG_ON_H
|
|
};
|
|
|
|
wireless_wlan: wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "clk_wifi";
|
|
rockchip,grf = <&grf>;
|
|
wifi_chip_type = "ap6256";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
|
WIFI,host_wake_irq = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //WIFI_WAKE_HOST_H
|
|
status = "okay";
|
|
};
|
|
|
|
bt_uart8: wireless_bluetooth: wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&rk809 1>;
|
|
clock-names = "ext_clock";
|
|
//wifi-bt-power-toggle;
|
|
uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart8m0_rtsn>;
|
|
pinctrl-1 = <&uart8_gpios>;
|
|
BT,reset_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //BT_REG_ON_H
|
|
BT,wake_gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; //HOST_WAKE_BT_H
|
|
BT,wake_host_irq = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; //BT_WAKE_HOST_H
|
|
status = "okay";
|
|
};
|
|
|
|
gpio_leds: gpio-leds {
|
|
compatible = "gpio-leds";
|
|
status = "okay";
|
|
user_leds: user-led {
|
|
gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "timer";
|
|
default-state = "on";
|
|
pinctrl-0 = <&user_led>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
status = "okay";
|
|
pmuio2-supply = <&vcc_3v3>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio3-supply = <&vccio_sd>;
|
|
vccio4-supply = <&vcc_1v8>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_1v8>;
|
|
vccio7-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&dfi {
|
|
status = "okay";
|
|
};
|
|
|
|
&dmc {
|
|
center-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
clock-names = "gpu", "bus";
|
|
interrupt-names = "gpu", "mmu", "job";
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: tcs4525@1c {
|
|
compatible = "tcs,tcs452x";
|
|
reg = <0x1c>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "fan53555-reg";
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1390000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <2300>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default", "pmic-sleep",
|
|
"pmic-power-off", "pmic-reset";
|
|
pinctrl-0 = <&pmic_int>;
|
|
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
|
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
|
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
|
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
|
//fb-inner-reg-idxs = <2>;
|
|
/* 1: rst regs (default in codes), 0: rst the pmic */
|
|
pmic-reset-func = <0>;
|
|
/* not save the PMIC_POWER_EN register in uboot */
|
|
not-save-power-en = <1>;
|
|
|
|
vcc1-supply = <&vcc3v3_sys>;
|
|
vcc2-supply = <&vcc3v3_sys>;
|
|
vcc3-supply = <&vcc3v3_sys>;
|
|
vcc4-supply = <&vcc3v3_sys>;
|
|
vcc5-supply = <&vcc3v3_sys>;
|
|
vcc6-supply = <&vcc3v3_sys>;
|
|
vcc7-supply = <&vcc3v3_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc3v3_sys>;
|
|
|
|
pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
pinctrl_rk8xx: pinctrl_rk8xx {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk817_slppin_null: rk817_slppin_null {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk817_slppin_slp: rk817_slppin_slp {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk817_slppin_rst: rk817_slppin_rst {
|
|
pins = "gpio_slp";
|
|
function = "pin_fun3";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_logic";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_gpu";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vcc_ddr";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu: DCDC_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-init-microvolt = <900000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-name = "vdd_npu";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_image: LDO_REG1 {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdda0v9_image";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdda_0v9";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdda0v9_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_acodec";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcca_1v8: LDO_REG7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca_1v8";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pmu: LDO_REG8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pmu";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_image: LDO_REG9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_image";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: SWITCH_REG1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc_3v3";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sd: SWITCH_REG2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vcc3v3_sd";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
rk809_codec: codec {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_mclk>;
|
|
hp-volume = <20>;
|
|
spk-volume = <3>;
|
|
mic-in-differential;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
status = "disabled";
|
|
rockchip,clk-trcm = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_sclktx
|
|
&i2s1m0_lrcktx
|
|
&i2s1m0_sdi0
|
|
&i2s1m0_sdo0>;
|
|
};
|
|
|
|
&gmac1 {
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1m1_miim
|
|
&gmac1m1_tx_bus2
|
|
&gmac1m1_rx_bus2
|
|
&gmac1m1_rgmii_clk
|
|
&gmac1m1_rgmii_bus>;
|
|
|
|
tx_delay = <0x44>;
|
|
rx_delay = <0x26>;
|
|
|
|
phy-handle = <&rgmii_phy1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&mdio1 {
|
|
status = "disabled";
|
|
|
|
rgmii_phy1: phy@0 {
|
|
status = "disabled";
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
&iep {
|
|
status = "okay";
|
|
};
|
|
|
|
&iep_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&rk_rga {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc {
|
|
venc-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&bus_npu {
|
|
bus-supply = <&vdd_logic>;
|
|
pvtm-supply = <&vdd_cpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
memory-region = <&rknpu_reserved>;
|
|
rknpu-supply = <&vdd_npu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vcca_1v8>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
supports-emmc;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
status = "okay";
|
|
};
|
|
|
|
//wifi
|
|
&sdmmc2 {
|
|
max-frequency = <150000000>;
|
|
supports-sdio;
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sfc {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkisp_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
//bt
|
|
&uart8 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
|
|
};
|
|
|
|
&reserved_memory {
|
|
ramoops: ramoops@110000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x110000 0x0 0xf0000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x80000>;
|
|
ftrace-size = <0x00000>;
|
|
pmsg-size = <0x50000>;
|
|
};
|
|
};
|
|
|
|
&rng {
|
|
status = "okay";
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int: pmic_int {
|
|
rockchip,pins =
|
|
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
soc_slppin_gpio: soc_slppin_gpio {
|
|
rockchip,pins =
|
|
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
|
|
};
|
|
|
|
soc_slppin_slp: soc_slppin_slp {
|
|
rockchip,pins =
|
|
<0 RK_PA2 1 &pcfg_pull_up>;
|
|
};
|
|
|
|
soc_slppin_rst: soc_slppin_rst {
|
|
rockchip,pins =
|
|
<0 RK_PA2 2 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart8_gpios: uart8-gpios {
|
|
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
user_led: user-led {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|