49 lines
1.7 KiB
Plaintext
49 lines
1.7 KiB
Plaintext
ROCKCHIP PCIE/USB3 COMBPHY WITH INNO IP BLOCK
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the listed compatibles:
|
|
"rockchip,rk1808-combphy"
|
|
- reg: Should be the address space for COMBPHY registers.
|
|
- #phy-cells: Should be 1. The cell number is used to select the
|
|
phy mode as defined in <dt-bindings/phy/phy.h>,
|
|
<&combphy PHY_TYPE_USB3> for USB3 PHY
|
|
<&combphy PHY_TYPE_PCIE> for PCIE PHY
|
|
- clocks: The phandle to clock provider and clock specifier pair.
|
|
- clock-names: Must be "refclk", the reference clock of COMBPHY.
|
|
- resets: The phandle to reset controller and reset specifier pair.
|
|
- reset-names: The string reset names, must be:
|
|
"otg-rst", "combphy-por",
|
|
"combphy-apb", "combphy-pipe".
|
|
- rockchip,combphygrf: The grf for COMBPHY configuration and state
|
|
registers.
|
|
|
|
Refer to phy/phy-bindings.txt for the generic PHY binding properties.
|
|
Optional properties:
|
|
- assigned-clocks: The phandle of COMBPHY reference clock.
|
|
- assigned-clock-rates: The COMBPHY reference clock frequency,
|
|
the default clock frequency is 24MHz,
|
|
can be set to 25000000 or 50000000.
|
|
|
|
Examples:
|
|
|
|
combphy_grf: syscon@fe018000 {
|
|
compatible = "rockchip,usb3phy-grf", "syscon";
|
|
reg = <0x0 0xfe018000 0x0 0x8000>;
|
|
};
|
|
|
|
combphy: phy@ff380000 {
|
|
compatible = "rockchip,rk1808-combphy";
|
|
reg = <0x0 0xff380000 0x0 0x10000>;
|
|
#phy-cells = <1>;
|
|
clocks = <&cru SCLK_PCIEPHY_REF>;
|
|
clock-names = "refclk";
|
|
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
|
|
assigned-clock-rates = <25000000>;
|
|
resets = <&cru SRST_USB3_OTG_A>, <&cru SRST_PCIEPHY_POR>,
|
|
<&cru SRST_PCIEPHY_P>, <&cru SRST_PCIEPHY_PIPE>;
|
|
reset-names = "otg-rst", "combphy-por",
|
|
"combphy-apb", "combphy-pipe";
|
|
rockchip,combphygrf = <&combphy_grf>;
|
|
status = "disabled";
|
|
};
|