1139 lines
22 KiB
Plaintext
1139 lines
22 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2023 Wesion Technology Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/input/rk-input.h>
|
|
#include <dt-bindings/display/rockchip_vop.h>
|
|
#include <dt-bindings/sensor-dev.h>
|
|
#include "dt-bindings/usb/pd.h"
|
|
#include "rk3588s.dtsi"
|
|
#include "rk3588-rk806-single-khadas.dtsi"
|
|
#include "rk3588-linux.dtsi"
|
|
|
|
/ {
|
|
model = "Khadas Edge2";
|
|
compatible = "khadas,edge2", "rockchip,rk3588";
|
|
/delete-node/ chosen;
|
|
|
|
adc_keys: adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
home-key {
|
|
label = "home";
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
press-threshold-microvolt = <17000>;
|
|
};
|
|
};
|
|
|
|
sound_micarray: sound-micarray {
|
|
status = "okay";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,name = "rockchip,sound-micarray";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,dai-link@0 {
|
|
format = "pdm";
|
|
cpu {
|
|
sound-dai = <&pdm0>;
|
|
};
|
|
codec {
|
|
sound-dai = <&dummy_codec>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dummy_codec: dummy-codec {
|
|
compatible = "rockchip,dummy-codec";
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
es8316_sound: es8316-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "rockchip,es8316-codec";
|
|
simple-audio-card,dai-link@0 {
|
|
format = "i2s";
|
|
cpu {
|
|
sound-dai = <&i2s0_8ch>;
|
|
};
|
|
codec {
|
|
sound-dai = <&es8316>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&red_led_gpio &green_led_gpio &blue_led_gpio>;
|
|
|
|
red_led {
|
|
gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
label = "red_led";
|
|
linux,default-trigger = "none";
|
|
default-state = "off";
|
|
};
|
|
|
|
green_led {
|
|
gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
label = "green_led";
|
|
linux,default-trigger = "default-on";
|
|
default-state = "on";
|
|
};
|
|
|
|
blue_led {
|
|
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
label = "blue_led";
|
|
linux,default-trigger = "none";
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
khadas_wdt {
|
|
compatible = "linux,wdt-khadas";
|
|
status = "okay";
|
|
hw_margin_ms = <500>;
|
|
hw-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usbdcin: vcc5v0-usbdcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usbdcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_usb: vcc5v0-usb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_usbdcin>;
|
|
};
|
|
|
|
vbus5v0_typec: vbus5v0-typec {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbus5v0_typec";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&typec5v_pwren>;
|
|
};
|
|
|
|
vcc3v3_pcie20: vcc3v3-pcie20 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie20";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_host_en>;
|
|
};
|
|
|
|
vcc_sd: vcc-sd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sd";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc_sd_en>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
dp0_sound: dp0-sound {
|
|
status = "okay";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,card-name = "rockchip-dp0";
|
|
rockchip,mclk-fs = <512>;
|
|
rockchip,cpu = <&spdif_tx2>;
|
|
rockchip,codec = <&dp0 1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
hdmi0_sound: hdmi0-sound {
|
|
status = "okay";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <128>;
|
|
simple-audio-card,name = "rockchip-hdmi0";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s5_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&hdmi0>;
|
|
};
|
|
};
|
|
|
|
spdif_tx1_dc: spdif-tx1-dc {
|
|
status = "disabled";
|
|
compatible = "linux,spdif-dit";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
spdif_tx1_sound: spdif-tx1-sound {
|
|
status = "disabled";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "rockchip,spdif-tx1";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&spdif_tx1>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&spdif_tx1_dc>;
|
|
};
|
|
};
|
|
|
|
wireless_bluetooth: wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&pt7c4363>;
|
|
clock-names = "ext_clock";
|
|
uart_rts_gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart9m2_rtsn>, <&bt_gpio>;
|
|
pinctrl-1 = <&uart9_gpios>;
|
|
BT,reset_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
bt-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "dsp_a";
|
|
simple-audio-card,bitclock-inversion = <1>;
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "rockchip,bt";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s2_2ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&bt_sco>;
|
|
};
|
|
};
|
|
|
|
bt_sco: bt-sco {
|
|
compatible = "delta,dfbmcs320";
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless_wlan: wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
wifi_chip_type = "ap6275p";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_host_wake_irq>;
|
|
WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
// WIFI,poweren_gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&av1d {
|
|
status = "okay";
|
|
};
|
|
|
|
&av1d_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
mem-supply = <&vdd_gpu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
};
|
|
|
|
&i2s2_2ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s5_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <12500>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
|
compatible = "rockchip,rk8603";
|
|
reg = <0x43>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <12500>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
usbc0: fusb302@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <RK_PB5 IRQ_TYPE_LEVEL_LOW>;
|
|
int-n-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vbus5v0_typec>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
pt7c4363: pt7c4363@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "pt7c4363";
|
|
wakeup-source;
|
|
};
|
|
|
|
khadas_mcu: system-controller@18 {
|
|
compatible = "khadas,mcu";
|
|
reg = <0x18>;
|
|
cooling-levels = <0 50 72 100>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&reboot_mode {
|
|
mode-reboot_test = <BOOT_QUIESCENT>;
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
gs_kxtj3: gs_kxtj3@e {
|
|
compatible = "gs_kxtj3";
|
|
reg = <0x0e>;
|
|
irq-gpio = <&gpio1 RK_PB0 IRQ_TYPE_EDGE_RISING>;
|
|
irq_enable = <0>;
|
|
poll_delay_ms = <30>;
|
|
type = <SENSOR_TYPE_ACCEL>;
|
|
layout = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
es8316: es8316@10 {
|
|
status = "okay";
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es8316";
|
|
reg = <0x10>;
|
|
clocks = <&mclkout_i2s0>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&mclkout_i2s0>;
|
|
assigned-clock-rates = <12288000>;
|
|
pinctrl-names = "default","hp_det","spk_con";
|
|
pinctrl-0 = <&i2s0_mclk>,<&hp_det>,<&spk_con>;
|
|
spk-con-gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
|
hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4m3_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l2 {
|
|
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie20>;
|
|
rockchip,skip-scan-in-resume;
|
|
status = "okay";
|
|
};
|
|
|
|
&pdm0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pdm0m0_clk
|
|
&pdm0m0_clk1
|
|
&pdm0m0_sdi0
|
|
&pdm0m0_sdi1
|
|
&pdm0m0_sdi2>;
|
|
rockchip,path-map = <0 1 2 3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
audio {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
spk_con: spk-con {
|
|
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
red_led_gpio: red-led-gpio {
|
|
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
green_led_gpio: green-led-gpio {
|
|
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
blue_led_gpio: blue-led-gpio {
|
|
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_host_en: vcc5v0-host-en {
|
|
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
vcc_sd {
|
|
vcc_sd_en: vcc-sd-en {
|
|
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb-typec {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
typec5v_pwren: typec5v-pwren {
|
|
rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart9_gpios: uart9-gpios {
|
|
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_gpio: bt-gpio {
|
|
rockchip,pins =
|
|
<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
|
|
<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
// wifi_poweren_gpio: wifi-poweren-gpio {
|
|
// rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
// };
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
compatible = "rockchip,remotectl-pwm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm3m3_pins>;
|
|
remote_pwm_id = <3>;
|
|
handle_cpu_id = <1>;
|
|
remote_support_psci = <0>;
|
|
status = "okay";
|
|
|
|
ir_key1 {
|
|
rockchip,usercode = <0xff00>;
|
|
rockchip,key_table =
|
|
<0xeb KEY_POWER>,
|
|
<0xec KEY_MENU>,
|
|
<0xfc KEY_UP>,
|
|
<0xfd KEY_DOWN>,
|
|
<0xf1 KEY_LEFT>,
|
|
<0xe5 KEY_RIGHT>,
|
|
<0xf8 KEY_ENTER>,
|
|
<0xa7 KEY_VOLUMEDOWN>,
|
|
<0xa3 388>,
|
|
<0xa4 388>,
|
|
<0xf4 KEY_VOLUMEUP>,
|
|
<0xfe KEY_BACK>,
|
|
<0xb7 KEY_HOMEPAGE>;
|
|
};
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
rockchip,sleep-mode-config = <
|
|
(0
|
|
| RKPM_SLP_ARMOFF_DDRPD
|
|
| RKPM_SLP_PMU_PMUALIVE_32K
|
|
| RKPM_SLP_PMU_DIS_OSC
|
|
| RKPM_SLP_32K_EXT
|
|
| RKPM_SLP_PMU_DBG
|
|
)
|
|
>;
|
|
status = "okay";
|
|
};
|
|
|
|
&route_hdmi0 {
|
|
status = "okay";
|
|
connect = <&vp0_out_hdmi0>;
|
|
/delete-property/ force-output;
|
|
/delete-node/ force_timing;
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vcc_1v8_s0>;
|
|
};
|
|
|
|
&sdmmc {
|
|
max-frequency = <150000000>;
|
|
card-detect-delay = <1200>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_sd>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&sfc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fspim2_pins>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0x0>;
|
|
spi-max-frequency = <100000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
};
|
|
};
|
|
|
|
&spdif_tx1 {
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spdif1m1_tx>;
|
|
};
|
|
|
|
&spdif_tx1_dc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&spdif_tx1_sound {
|
|
status = "disabled";
|
|
};
|
|
|
|
&spdif_tx2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi1 {
|
|
status = "disabled";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
|
|
};
|
|
|
|
&soc_thermal {
|
|
polling-delay = <1000>;
|
|
polling-delay-passive = <2000>;
|
|
|
|
trips {
|
|
trip0: trip-point@0 {
|
|
temperature = <45000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
|
|
trip1: trip-point@1 {
|
|
temperature = <55000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
|
|
trip2: trip-point@2 {
|
|
temperature = <60000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
|
|
trip3: trip-point@3 {
|
|
temperature = <70000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&trip0>;
|
|
cooling-device = <&khadas_mcu 0 1>;
|
|
contribution = <1024>;
|
|
};
|
|
|
|
map1 {
|
|
trip = <&trip1>;
|
|
cooling-device = <&khadas_mcu 1 2>;
|
|
contribution = <1024>;
|
|
};
|
|
|
|
map2 {
|
|
trip = <&trip2>;
|
|
cooling-device = <&khadas_mcu 2 3>;
|
|
contribution = <1024>;
|
|
};
|
|
|
|
map3 {
|
|
trip = <&trip3>;
|
|
cooling-device = <&khadas_mcu 3 THERMAL_NO_LIMIT>;
|
|
contribution = <1024>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&iep {
|
|
status = "okay";
|
|
};
|
|
|
|
&iep_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
rknpu-supply = <&vdd_npu_s0>;
|
|
mem-supply = <&vdd_npu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
/* vp0 & vp1 splice for 8K output */
|
|
&vp0 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER0>;
|
|
cursor-win-id = <ROCKCHIP_VOP2_ESMART0>;
|
|
};
|
|
|
|
&vp1 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER1>;
|
|
cursor-win-id = <ROCKCHIP_VOP2_ESMART1>;
|
|
};
|
|
|
|
&vp2 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER2>;
|
|
cursor-win-id = <ROCKCHIP_VOP2_ESMART2>;
|
|
};
|
|
|
|
&vp3 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER3 | 1 << ROCKCHIP_VOP2_ESMART3)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER3>;
|
|
cursor-win-id = <ROCKCHIP_VOP2_ESMART3>;
|
|
};
|
|
|
|
&display_subsystem {
|
|
clocks = <&hdptxphy_hdmi0>;
|
|
clock-names = "hdmi0_phy_pll";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart9 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>;
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
rockchip,typec-vbus-det;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
orientation-switch;
|
|
svid = <0xff01>;
|
|
sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdp_phy0_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
|
|
usb-role-switch;
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbhost3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbhost_dwc3_0 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&vdd_log_s0 {
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
&vcc_1v8_s0 {
|
|
/delete-property/ regulator-state-mem;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
&vcc_3v3_s0 {
|
|
/delete-property/ regulator-state-mem;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|