1416 lines
26 KiB
Plaintext
1416 lines
26 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "rk3588.dtsi"
|
|
#include "rk3588s.dtsi"
|
|
#include "rk3588-rk806-single.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/input/rk-input.h>
|
|
#include <dt-bindings/display/drm_mipi_dsi.h>
|
|
#include <dt-bindings/display/rockchip_vop.h>
|
|
#include <dt-bindings/sensor-dev.h>
|
|
#include "rk3588-linux.dtsi"
|
|
|
|
|
|
/ {
|
|
model = "Firefly ITX-3588J HDMI(Linux)";
|
|
compatible = "rockchip,rk3588-firefly-itx-3588j", "rockchip,rk3588";
|
|
|
|
/delete-node/ chosen;
|
|
|
|
adc_keys: adc-keys {
|
|
status = "okay";
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 1>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1800000>;
|
|
poll-interval = <100>;
|
|
|
|
recovery-key{
|
|
label = "F12";
|
|
linux,code = <KEY_F12>;
|
|
press-threshold-microvolt = <10000>;
|
|
};
|
|
};
|
|
|
|
bt_sco: bt-sco {
|
|
status = "okay";
|
|
compatible = "delta,dfbmcs320";
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
bt_sound: bt-sound {
|
|
status = "okay";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "dsp_a";
|
|
simple-audio-card,bitclock-inversion = <0>;
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "rockchip,bt";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1_8ch>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&bt_sco 1>;
|
|
};
|
|
};
|
|
|
|
dp0_sound: dp0-sound {
|
|
status = "okay";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,card-name= "rockchip-dp0";
|
|
rockchip,mclk-fs = <512>;
|
|
rockchip,cpu = <&spdif_tx2>;
|
|
rockchip,codec = <&dp0 1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
es8388_sound: es8388-sound {
|
|
status = "okay";
|
|
compatible = "firefly,multicodecs-card";
|
|
firefly,not-use-dapm;
|
|
rockchip,card-name = "rockchip-es8388";
|
|
hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
io-channels = <&saradc 3>;
|
|
io-channel-names = "adc-detect";
|
|
spk-con-gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
hp-con-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
linein-type = <0>;
|
|
rockchip,format = "i2s";
|
|
rockchip,mclk-fs = <384>;
|
|
rockchip,cpu = <&i2s0_8ch>;
|
|
rockchip,codec = <&es8388>;
|
|
rockchip,audio-routing =
|
|
"Headphone", "LOUT1",
|
|
"Headphone", "ROUT1",
|
|
"Speaker", "LOUT2",
|
|
"Speaker", "ROUT2",
|
|
"Headphone", "Headphone Power",
|
|
"Headphone", "Headphone Power",
|
|
"Speaker", "Speaker Power",
|
|
"Speaker", "Speaker Power",
|
|
"LINPUT2", "Main Mic",
|
|
"RINPUT2", "Main Mic",
|
|
"LINPUT1", "Headset Mic",
|
|
"RINPUT1", "Headset Mic";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det>;
|
|
};
|
|
|
|
hdmi0_sound: hdmi0-sound {
|
|
status = "okay";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,mclk-fs = <128>;
|
|
rockchip,card-name = "rockchip-hdmi0";
|
|
rockchip,cpu = <&i2s5_8ch>;
|
|
rockchip,codec = <&hdmi0>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
spdif_tx1_dc: spdif-tx1-dc {
|
|
status = "disabled";
|
|
compatible = "linux,spdif-dit";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
spdif_tx1_sound: spdif-tx1-sound {
|
|
status = "disabled";
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,mclk-fs = <128>;
|
|
simple-audio-card,name = "rockchip,spdif-tx1";
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&spdif_tx1>;
|
|
};
|
|
simple-audio-card,codec {
|
|
sound-dai = <&spdif_tx1_dc>;
|
|
};
|
|
};
|
|
|
|
test-power {
|
|
status = "okay";
|
|
};
|
|
|
|
fan: pwm-fan {
|
|
compatible = "pwm-fan";
|
|
#cooling-cells = <2>;
|
|
cooling-levels = <60 100 140 160 185 220 255>;
|
|
fan-supply = <&vcc12v_dcin>;
|
|
pwms = <&pwm15 0 50000 1>;
|
|
};
|
|
|
|
firefly_leds: leds {
|
|
compatible = "gpio-leds";
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 =<&leds_gpio>;
|
|
power_led: power {
|
|
label = ":power";//green led
|
|
linux,default-trigger = "ir-power-click";
|
|
default-state = "on";
|
|
gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
user_led: user {
|
|
label = ":user";//yellow led
|
|
linux,default-trigger = "ir-user-click";
|
|
default-state = "off";
|
|
gpios = <&pca9555 PCA_IO0_3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
vcc_hub3_reset: vcc-hub3-reset-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_hub3_reset";
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
status = "okay";
|
|
gpio = <&pca9555 PCA_IO0_6 GPIO_ACTIVE_HIGH>;//PCA_IO 06
|
|
};
|
|
|
|
vbus5v0_typec_pwr_en: vbus5v0-typec-pwr-en-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbus5v0_typec_pwr_en";
|
|
enable-active-high;
|
|
status = "okay";
|
|
gpio = <&pca9555 PCA_IO1_4 GPIO_ACTIVE_HIGH>;//PCA_IO 14
|
|
};
|
|
|
|
vcc_hub_reset: vcc-hub-reset-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_hub_reset";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
status = "okay";
|
|
gpio = <&pca9555 PCA_IO0_4 GPIO_ACTIVE_HIGH>;//PCA_IO 04
|
|
};
|
|
|
|
vcc12v_dcin: vcc12v-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc12v_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc5v0_host3: vcc5v0-host3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host3";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&pca9555 PCA_IO0_7 GPIO_ACTIVE_HIGH>;//PCA_IO 07
|
|
vin-supply = <&vcc5v0_usb>;
|
|
status = "okay";
|
|
};
|
|
|
|
vcc5v0_host: vcc5v0-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_host";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&pca9555 PCA_IO0_5 GPIO_ACTIVE_HIGH>;
|
|
vin-supply = <&vcc5v0_usb>;
|
|
status = "okay";
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_usbdcin: vcc5v0-usbdcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usbdcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc5v0_usb: vcc5v0-usb {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_sata_pwr_en: vcc-sata-pwr-en-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sata_pwr_en";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
status = "okay";
|
|
gpio = <&pca9555 PCA_IO1_2 GPIO_ACTIVE_HIGH>;//PCA_IO 12
|
|
};
|
|
|
|
vcc_fan_pwr_en: vcc-fan-pwr-en-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_fan_pwr_en";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
status = "okay";
|
|
gpio = <&pca9555 PCA_IO1_3 GPIO_ACTIVE_HIGH>;//PCA_IO 13
|
|
};
|
|
|
|
vcc_sdcard_pwr_en: vcc-sdcard-pwr-en-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sdcard_pwr_en";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
enable-active-high;
|
|
gpio = <&pca9555 PCA_IO1_5 GPIO_ACTIVE_HIGH>;//PCA_IO 15
|
|
status = "okay";
|
|
};
|
|
|
|
vcc3v3_pcie30: vcc3v3-pcie30 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie30";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc12v_dcin>;
|
|
status = "okay";
|
|
};
|
|
|
|
pcie30_avdd1v8: pcie30-avdd1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd1v8";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&avcc_1v8_s0>;
|
|
};
|
|
|
|
pcie30_avdd0v75: pcie30-avdd0v75 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pcie30_avdd0v75";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
vin-supply = <&avdd_0v75_s0>;
|
|
};
|
|
|
|
hdmi1_sound: hdmi1-sound {
|
|
status = "okay";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,mclk-fs = <128>;
|
|
rockchip,card-name = "rockchip-hdmi1";
|
|
rockchip,cpu = <&i2s6_8ch>;
|
|
rockchip,codec = <&hdmi1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
dp1_sound: dp1-sound {
|
|
status = "disabled";
|
|
compatible = "rockchip,hdmi";
|
|
rockchip,card-name= "rockchip,dp1";
|
|
rockchip,mclk-fs = <512>;
|
|
rockchip,cpu = <&spdif_tx5>;
|
|
rockchip,codec = <&dp1 1>;
|
|
rockchip,jack-det;
|
|
};
|
|
|
|
wireless_bluetooth: wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&hym8563>;
|
|
clock-names = "ext_clock";
|
|
uart_rts_gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart6m1_rtsn>, <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_irq_gpio>;
|
|
pinctrl-1 = <&uart6_gpios>;
|
|
BT,power_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless_wlan: wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
wifi_chip_type = "ap6275p";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_poweren_gpio>;
|
|
/delete-property/ WIFI,host_wake_irq;
|
|
WIFI,poweren_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* If hdmirx node is disabled, delete the reserved-memory node here. */
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* Reserve 256MB memory for hdmirx-controller@fdee0000 */
|
|
cma {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
reg = <0x0 (256 * 0x100000) 0x0 (256 * 0x100000)>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
|
|
hdmiin_sound: hdmiin-sound {
|
|
compatible = "rockchip,hdmi";
|
|
status = "okay";
|
|
rockchip,mclk-fs = <128>;
|
|
rockchip,format = "i2s";
|
|
rockchip,bitclock-master = <&hdmirx_ctrler>;
|
|
rockchip,frame-master = <&hdmirx_ctrler>;
|
|
rockchip,card-name = "rockchip,hdmiin";
|
|
rockchip,cpu = <&i2s7_8ch>;
|
|
rockchip,codec = <&hdmirx_ctrler 0>;
|
|
rockchip,jack-det;
|
|
};
|
|
};
|
|
|
|
&av1d {
|
|
status = "okay";
|
|
};
|
|
|
|
&av1d_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&can1 {
|
|
status = "okay";
|
|
assigned-clocks = <&cru CLK_CAN1>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&can1m1_pins>;
|
|
};
|
|
|
|
/* sata pm */
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2_psu {
|
|
status = "okay";// USB3.1/SATA/PCIe Combo PHY
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big0_s0>;
|
|
mem-supply = <&vdd_cpu_big0_mem_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big1_s0>;
|
|
mem-supply = <&vdd_cpu_big1_mem_s0>;
|
|
};
|
|
|
|
&display_subsystem {
|
|
clocks = <&hdptxphy_hdmi0>, <&hdptxphy_hdmi1>;
|
|
clock-names = "hdmi0_phy_pll", "hdmi1_phy_pll";
|
|
};
|
|
|
|
&dp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp0_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* display port1 to vga */
|
|
&dp1_in_vp2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dp1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dp1_hpd>;
|
|
hpd-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&route_dp1{
|
|
status = "disabled";
|
|
connect = <&vp2_out_dp1>;
|
|
};
|
|
|
|
&gmac0 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
snps,reset-gpio = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
|
|
tx_delay = <0x45>;
|
|
//rx_delay = <0x4a>;
|
|
|
|
phy-handle = <&rgmii_phy0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac0_tx_bus2{
|
|
rockchip,pins =
|
|
/* gmac0_txd0 */
|
|
<2 RK_PB6 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac0_txd1 */
|
|
<2 RK_PB7 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac0_txen */
|
|
<2 RK_PC0 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
&gmac0_rgmii_bus{
|
|
rockchip,pins =
|
|
/* gmac0_rxd2 */
|
|
<2 RK_PA6 1 &pcfg_pull_none>,
|
|
/* gmac0_rxd3 */
|
|
<2 RK_PA7 1 &pcfg_pull_none>,
|
|
/* gmac0_txd2 */
|
|
<2 RK_PB1 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac0_txd3 */
|
|
<2 RK_PB2 1 &pcfg_pull_up_drv_level_6>;
|
|
};
|
|
|
|
&gmac1 {
|
|
/* Use rgmii-rxid mode to disable rx delay inside Soc */
|
|
phy-mode = "rgmii-rxid";
|
|
clock_in_out = "output";
|
|
|
|
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 20ms, 100ms for rtl8211f */
|
|
snps,reset-delays-us = <0 20000 100000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1_miim
|
|
&gmac1_tx_bus2
|
|
&gmac1_rx_bus2
|
|
&gmac1_rgmii_clk
|
|
&gmac1_rgmii_bus>;
|
|
|
|
tx_delay = <0x42>;
|
|
//rx_delay = <0x4f>;
|
|
|
|
phy-handle = <&rgmii_phy1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1_tx_bus2{
|
|
rockchip,pins =
|
|
/* gmac1_txd0 */
|
|
<3 RK_PB3 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac1_txd1 */
|
|
<3 RK_PB4 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac1_txen */
|
|
<3 RK_PB5 1 &pcfg_pull_none>;
|
|
};
|
|
|
|
&gmac1_rgmii_bus{
|
|
rockchip,pins =
|
|
/* gmac1_rxd2 */
|
|
<3 RK_PA2 1 &pcfg_pull_none>,
|
|
/* gmac1_rxd3 */
|
|
<3 RK_PA3 1 &pcfg_pull_none>,
|
|
/* gmac1_txd2 */
|
|
<3 RK_PA0 1 &pcfg_pull_up_drv_level_6>,
|
|
/* gmac1_txd3 */
|
|
<3 RK_PA1 1 &pcfg_pull_up_drv_level_6>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
mem-supply = <&vdd_gpu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0 {
|
|
enable-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi0_in_vp0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&route_hdmi0{
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1 {
|
|
enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi1_in_vp1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy_hdmi1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&route_hdmi1{
|
|
status = "okay";
|
|
connect = <&vp1_out_hdmi1>;
|
|
};
|
|
|
|
&hdmirx_ctrler {
|
|
status = "okay";
|
|
#sound-dai-cells = <1>;
|
|
//memory-region = <&hdmirx>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmim1_rx &hdmirx_det>;
|
|
/* Effective level used to trigger HPD: 0-low, 1-high */
|
|
hpd-trigger-level = <1>;
|
|
hdmirx-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c0m2_xfer>;
|
|
|
|
vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big0_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 {
|
|
compatible = "rockchip,rk8603";
|
|
reg = <0x43>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_cpu_big1_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c1m2_xfer>;
|
|
|
|
vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 {
|
|
compatible = "rockchip,rk8602";
|
|
reg = <0x42>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
regulator-compatible = "rk860x-reg";
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <2300>;
|
|
rockchip,suspend-voltage-selector = <1>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
es8388: es8388@11 {
|
|
status = "okay";
|
|
#sound-dai-cells = <0>;
|
|
compatible = "everest,es8388", "everest,es8323";
|
|
reg = <0x11>;
|
|
clocks = <&mclkout_i2s0>;
|
|
clock-names = "mclk";
|
|
assigned-clocks = <&mclkout_i2s0>;
|
|
assigned-clock-rates = <12288000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s0_mclk>;
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;// For others Display Port Screen
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6m0_xfer>;
|
|
|
|
pca9555: gpio@21 {
|
|
compatible = "nxp,pca9555";
|
|
reg = <0x21>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-group-num = <200>;
|
|
status = "okay";
|
|
};
|
|
|
|
hym8563: hym8563@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "hym8563";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
|
wakeup-source;
|
|
status = "okay";
|
|
};
|
|
|
|
usbc0: fusb302@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_int>;
|
|
vbus-supply = <&vbus5v0_typec_pwr_en>;
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_role_sw: endpoint@0 {
|
|
remote-endpoint = <&dwc3_0_role_switch>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
op-sink-microwatt = <1000000>;
|
|
sink-pdos =
|
|
<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
|
source-pdos =
|
|
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
|
|
altmodes {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
altmode@0 {
|
|
reg = <0>;
|
|
svid = <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_orien_sw: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_orientation_switch>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dp_altmode_mux: endpoint {
|
|
remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2s0_lrck
|
|
&i2s0_sclk
|
|
&i2s0_sdi0
|
|
&i2s0_sdo0>;
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2s1m0_lrck &i2s1m0_sclk &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
|
rockchip,bclk-fs = <32>;
|
|
};
|
|
|
|
&i2s5_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&iep {
|
|
status = "okay";
|
|
};
|
|
|
|
&iep_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpegd_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege2_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&jpege3_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
};
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie2x1l0 {
|
|
reset-gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
rockchip,skip-scan-in-resume;
|
|
status = "okay";
|
|
};
|
|
|
|
/* pcie3.0 x 4 slot */
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x4 {
|
|
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
dp {
|
|
dp1_hpd: dp1-hpd {
|
|
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
leds_gpio: leds-gpio {
|
|
/* led_power */
|
|
rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hdmirx {
|
|
hdmirx_det: hdmirx-det {
|
|
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
lcd {
|
|
lcd_rst_gpio: lcd-rst-gpio {
|
|
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
touch {
|
|
touch_gpio: touch-gpio {
|
|
rockchip,pins =
|
|
<0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>,
|
|
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb-typec {
|
|
usbc0_int: usbc0-int {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart6_gpios: uart6-gpios {
|
|
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_reset_gpio: bt-reset-gpio {
|
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_wake_gpio: bt-wake-gpio {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_irq_gpio: bt-irq-gpio {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_host_wake_irq: wifi-host-wake-irq {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
wifi_poweren_gpio: wifi-poweren-gpio {
|
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm15 {
|
|
pinctrl-0 = <&pwm15m2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_core1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga3_1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rga2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu {
|
|
rknpu-supply = <&vdd_npu_s0>;
|
|
mem-supply = <&vdd_npu_mem_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rknpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc_ccu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc0_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvenc1_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
rockchip,sleep-debug-en = <1>;
|
|
rockchip,sleep-mode-config = <
|
|
(0
|
|
| RKPM_SLP_ARMOFF_DDRPD
|
|
| RKPM_SLP_PMU_PMUALIVE_32K
|
|
| RKPM_SLP_PMU_DIS_OSC
|
|
| RKPM_SLP_32K_EXT
|
|
| RKPM_SLP_PMU_DBG
|
|
)
|
|
>;
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vcc_1v8_s0>;
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
max-frequency = <150000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
sd-uhs-sdr104;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&soc_thermal {
|
|
sustainable-power = <15000>; /* milliwatts */
|
|
polling-delay = <1000>;
|
|
polling-delay-passive = <2000>;
|
|
|
|
trips {
|
|
trip0: trip-point@0 {
|
|
temperature = <55000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
trip1: trip-point@1 {
|
|
temperature = <60000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
trip2: trip-point@2 {
|
|
temperature = <65000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
trip3: trip-point@3 {
|
|
temperature = <70000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
trip4: trip-point@4 {
|
|
temperature = <75000>;
|
|
hysteresis = <5000>;
|
|
type = "active";
|
|
};
|
|
pcritical: trip-point@5 {
|
|
temperature = <80000>;
|
|
hysteresis = <1000>;
|
|
type = "active";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&trip0>;
|
|
cooling-device = <&fan 0 1>;
|
|
contribution = <1024>;
|
|
};
|
|
map1 {
|
|
trip = <&trip1>;
|
|
cooling-device = <&fan 1 2>;
|
|
contribution = <1024>;
|
|
};
|
|
map2 {
|
|
trip = <&trip2>;
|
|
cooling-device = <&fan 2 3>;
|
|
contribution = <1024>;
|
|
};
|
|
map3 {
|
|
trip = <&trip3>;
|
|
cooling-device = <&fan 3 4>;
|
|
contribution = <1024>;
|
|
};
|
|
map4 {
|
|
trip = <&trip4>;
|
|
cooling-device = <&fan 4 5>;
|
|
contribution = <1024>;
|
|
};
|
|
map5 {
|
|
trip = <&pcritical>;
|
|
cooling-device = <&fan 5 6>;
|
|
contribution = <1024>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* uart/232/485 */
|
|
&uart0{
|
|
pinctrl-0 = <&uart0m2_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1{
|
|
pinctrl-0 = <&uart1m1_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart6 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
rockchip,typec-vbus-det;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0 {
|
|
orientation-switch;
|
|
status = "okay";
|
|
svid = <0xff01>;
|
|
sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
usbdp_phy0_orientation_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_orien_sw>;
|
|
};
|
|
|
|
usbdp_phy0_dp_altmode_mux: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&dp_altmode_mux>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usbdrd_dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "otg";
|
|
usb-role-switch;
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dwc3_0_role_switch: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&usbc0_role_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3_host {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
/*usb3.1 host2 controller for 5G module*/
|
|
&usbhost3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbhost_dwc3_0 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy0_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1 {
|
|
rockchip,dp-lane-mux = <2 3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1_u3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdd_log_s0 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_log_s0";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
/* vp0 & vp1 splice for 8K output */
|
|
&vp0 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART0>;
|
|
assigned-clocks = <&cru ACLK_VOP>;
|
|
assigned-clock-rates = <800000000>;
|
|
};
|
|
|
|
&vp1 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART1>;
|
|
};
|
|
|
|
&vp2 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART2>;
|
|
};
|
|
|
|
&vp3 {
|
|
rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER3 | 1 << ROCKCHIP_VOP2_ESMART3)>;
|
|
rockchip,primary-plane = <ROCKCHIP_VOP2_ESMART3>;
|
|
};
|
|
|
|
&avdd_0v75_s0 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "avdd_0v75_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy1_dp {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif_tx2{
|
|
status = "okay";
|
|
};
|
|
|
|
&avcc_1v8_s0{
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
&vcc_1v8_s0{
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
}; |