1193 lines
24 KiB
Plaintext
1193 lines
24 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
/*
|
||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||
*
|
||
*/
|
||
|
||
/dts-v1/;
|
||
|
||
#include <dt-bindings/gpio/gpio.h>
|
||
#include <dt-bindings/display/media-bus-format.h>
|
||
#include <dt-bindings/pinctrl/rockchip.h>
|
||
#include <dt-bindings/display/rockchip_vop.h>
|
||
#include <dt-bindings/display/drm_mipi_dsi.h>
|
||
#include <dt-bindings/pwm/pwm.h>
|
||
#include <dt-bindings/input/rk-input.h>
|
||
#include <dt-bindings/sensor-dev.h>
|
||
#include "rk3566.dtsi"
|
||
|
||
/ {
|
||
model = "TaishanPi V10 Board";
|
||
compatible = "lckfb,tspi-v10", "rockchip,rk3566";
|
||
|
||
fiq-debugger {
|
||
compatible = "rockchip,fiq-debugger";
|
||
rockchip,serial-id = <2>;
|
||
rockchip,wake-irq = <0>;
|
||
/* If enable uart uses irq instead of fiq */
|
||
rockchip,irq-mode-enable = <1>;
|
||
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
||
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&uart2m0_xfer>;
|
||
status = "okay";
|
||
};
|
||
|
||
debug: debug@fd904000 {
|
||
compatible = "rockchip,debug";
|
||
reg = <0x0 0xfd904000 0x0 0x1000>,
|
||
<0x0 0xfd905000 0x0 0x1000>,
|
||
<0x0 0xfd906000 0x0 0x1000>,
|
||
<0x0 0xfd907000 0x0 0x1000>;
|
||
};
|
||
|
||
cspmu: cspmu@fd90c000 {
|
||
compatible = "rockchip,cspmu";
|
||
reg = <0x0 0xfd90c000 0x0 0x1000>,
|
||
<0x0 0xfd90d000 0x0 0x1000>,
|
||
<0x0 0xfd90e000 0x0 0x1000>,
|
||
<0x0 0xfd90f000 0x0 0x1000>;
|
||
};
|
||
|
||
adc_keys: adc-keys {
|
||
compatible = "adc-keys";
|
||
io-channels = <&saradc 0>;
|
||
io-channel-names = "buttons";
|
||
keyup-threshold-microvolt = <1800000>;
|
||
poll-interval = <100>;
|
||
|
||
restart-key {
|
||
label = "restart";
|
||
linux,code = <KEY_RESTART>;
|
||
press-threshold-microvolt = <108>;
|
||
};
|
||
};
|
||
|
||
audiopwmout_diff: audiopwmout-diff {
|
||
status = "disabled";
|
||
compatible = "simple-audio-card";
|
||
simple-audio-card,format = "i2s";
|
||
simple-audio-card,name = "rockchip,audiopwmout-diff";
|
||
simple-audio-card,mclk-fs = <256>;
|
||
simple-audio-card,bitclock-master = <&master>;
|
||
simple-audio-card,frame-master = <&master>;
|
||
simple-audio-card,cpu {
|
||
sound-dai = <&i2s3_2ch>;
|
||
};
|
||
master: simple-audio-card,codec {
|
||
sound-dai = <&dig_acodec>;
|
||
};
|
||
};
|
||
|
||
dc_12v: dc-12v {
|
||
compatible = "regulator-fixed";
|
||
regulator-name = "dc_12v";
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <12000000>;
|
||
regulator-max-microvolt = <12000000>;
|
||
};
|
||
|
||
pdmics: dummy-codec {
|
||
status = "disabled";
|
||
compatible = "rockchip,dummy-codec";
|
||
#sound-dai-cells = <0>;
|
||
};
|
||
|
||
pdm_mic_array: pdm-mic-array {
|
||
status = "disabled";
|
||
compatible = "simple-audio-card";
|
||
simple-audio-card,name = "rockchip,pdm-mic-array";
|
||
simple-audio-card,cpu {
|
||
sound-dai = <&pdm>;
|
||
};
|
||
simple-audio-card,codec {
|
||
sound-dai = <&pdmics>;
|
||
};
|
||
};
|
||
|
||
rk809_sound: rk809-sound {
|
||
status = "okay";
|
||
compatible = "simple-audio-card";
|
||
simple-audio-card,format = "i2s";
|
||
simple-audio-card,name = "rockchip,rk809-codec";
|
||
simple-audio-card,mclk-fs = <256>;
|
||
|
||
simple-audio-card,cpu {
|
||
sound-dai = <&i2s1_8ch>;
|
||
};
|
||
simple-audio-card,codec {
|
||
sound-dai = <&rk809_codec>;
|
||
};
|
||
};
|
||
|
||
spdif-sound {
|
||
status = "disabled";
|
||
compatible = "simple-audio-card";
|
||
simple-audio-card,name = "ROCKCHIP,SPDIF";
|
||
simple-audio-card,cpu {
|
||
sound-dai = <&spdif_8ch>;
|
||
};
|
||
simple-audio-card,codec {
|
||
sound-dai = <&spdif_out>;
|
||
};
|
||
};
|
||
|
||
spdif_out: spdif-out {
|
||
status = "disabled";
|
||
compatible = "linux,spdif-dit";
|
||
#sound-dai-cells = <0>;
|
||
};
|
||
|
||
vad_sound: vad-sound {
|
||
status = "disabled";
|
||
compatible = "rockchip,multicodecs-card";
|
||
rockchip,card-name = "rockchip,rk3568-vad";
|
||
rockchip,cpu = <&i2s1_8ch>;
|
||
rockchip,codec = <&rk809_codec>, <&vad>;
|
||
};
|
||
|
||
vcc3v3_sys: vcc3v3-sys {
|
||
compatible = "regulator-fixed";
|
||
regulator-name = "vcc3v3_sys";
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <3300000>;
|
||
regulator-max-microvolt = <3300000>;
|
||
vin-supply = <&vcc5v0_sys>;
|
||
};
|
||
|
||
vcc5v0_sys: vcc5v0-sys {
|
||
compatible = "regulator-fixed";
|
||
regulator-name = "vcc5v0_sys";
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <5000000>;
|
||
regulator-max-microvolt = <5000000>;
|
||
vin-supply = <&dc_12v>;
|
||
};
|
||
|
||
vcc5v0_usb: vcc5v0-usb {
|
||
compatible = "regulator-fixed";
|
||
regulator-name = "vcc5v0_usb";
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <5000000>;
|
||
regulator-max-microvolt = <5000000>;
|
||
};
|
||
|
||
vcc5v0_host: vcc5v0-host-regulator {
|
||
compatible = "regulator-fixed";
|
||
regulator-name = "vcc5v0_host";
|
||
regulator-boot-on;
|
||
regulator-always-on;
|
||
regulator-min-microvolt = <5000000>;
|
||
regulator-max-microvolt = <5000000>;
|
||
enable-active-high;
|
||
gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||
vin-supply = <&vcc5v0_usb>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&vcc5v0_host_en>;
|
||
};
|
||
|
||
sdio_pwrseq: sdio-pwrseq {
|
||
compatible = "mmc-pwrseq-simple";
|
||
clocks = <&rk809 1>;
|
||
clock-names = "ext_clock";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&wifi_enable_h>;
|
||
|
||
/*
|
||
* On the module itself this is one of these (depending
|
||
* on the actual card populated):
|
||
* - SDIO_RESET_L_WL_REG_ON
|
||
* - PDN (power down when low)
|
||
*/
|
||
post-power-on-delay-ms = <200>;
|
||
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
|
||
};
|
||
|
||
wireless_wlan: wireless-wlan {
|
||
compatible = "wlan-platdata";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||
WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||
rockchip,grf = <&grf>;
|
||
wifi_chip_type = "ap6212";
|
||
status = "okay";
|
||
};
|
||
|
||
wireless_bluetooth: wireless-bluetooth {
|
||
compatible = "bluetooth-platdata";
|
||
clocks = <&rk809 1>;
|
||
clock-names = "ext_clock";
|
||
//wifi-bt-power-toggle;
|
||
uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
||
pinctrl-names = "default", "rts_gpio";
|
||
pinctrl-0 = <&uart1m0_rtsn>;
|
||
pinctrl-1 = <&uart1_gpios>;
|
||
BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||
BT,wake_gpio = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||
BT,wake_host_irq = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||
status = "okay";
|
||
};
|
||
|
||
test-power {
|
||
status = "okay";
|
||
};
|
||
|
||
rk_headset: rk-headset {
|
||
compatible = "rockchip_headset";
|
||
headset_gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&hp_det>;
|
||
};
|
||
|
||
leds: leds {
|
||
compatible = "gpio-leds";
|
||
rgb_led_r: rgb-led-r {
|
||
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
|
||
linux,default-trigger = "timer";
|
||
linux,delay-reg = <0>;
|
||
linux,blink-delay-on = <500>;
|
||
linux,blink-delay-off = <500>;
|
||
};
|
||
rgb_led_g: rgb-led-g {
|
||
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
|
||
linux,default-trigger = "timer";
|
||
linux,delay-reg = <100>;
|
||
linux,blink-delay-on = <1000>;
|
||
linux,blink-delay-off = <1000>;
|
||
};
|
||
rgb_led_b: rgb-led-b {
|
||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
|
||
linux,default-trigger = "timer";
|
||
linux,delay-reg = <100>;
|
||
linux,blink-delay-on = <1500>;
|
||
linux,blink-delay-off = <1500>;
|
||
};
|
||
};
|
||
|
||
ex39-usb-vcc5v0-host-en {
|
||
compatible = "regulator-fixed";
|
||
enable-active-high;
|
||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&ex39_usb_vcc5v0_host_en>;
|
||
regulator-name = "ex39_usb_vcc5v0_host_en";
|
||
regulator-always-on;
|
||
};
|
||
|
||
hdmi_sound: hdmi-sound {
|
||
compatible = "simple-audio-card";
|
||
simple-audio-card,format = "i2s";
|
||
simple-audio-card,mclk-fs = <128>;
|
||
simple-audio-card,name = "rockchip,hdmi";
|
||
status = "disabled";
|
||
|
||
simple-audio-card,cpu {
|
||
sound-dai = <&i2s0_8ch>;
|
||
};
|
||
simple-audio-card,codec {
|
||
sound-dai = <&hdmi>;
|
||
};
|
||
};
|
||
|
||
};
|
||
|
||
&reserved_memory {
|
||
ramoops: ramoops@110000 {
|
||
compatible = "ramoops";
|
||
reg = <0x0 0x110000 0x0 0xf0000>;
|
||
record-size = <0x20000>;
|
||
console-size = <0x80000>;
|
||
ftrace-size = <0x00000>;
|
||
pmsg-size = <0x50000>;
|
||
};
|
||
};
|
||
|
||
&rng {
|
||
status = "okay";
|
||
};
|
||
|
||
|
||
&rockchip_suspend {
|
||
status = "okay";
|
||
};
|
||
|
||
&vop {
|
||
disable-win-move;
|
||
};
|
||
|
||
&vp0 {
|
||
cursor-win-id = <ROCKCHIP_VOP2_ESMART0>;
|
||
};
|
||
|
||
&vp1 {
|
||
cursor-win-id = <ROCKCHIP_VOP2_ESMART1>;
|
||
};
|
||
|
||
&bus_npu {
|
||
bus-supply = <&vdd_logic>;
|
||
pvtm-supply = <&vdd_cpu>;
|
||
status = "okay";
|
||
};
|
||
|
||
|
||
&can0 {
|
||
assigned-clocks = <&cru CLK_CAN0>;
|
||
assigned-clock-rates = <150000000>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&can0m1_pins>;
|
||
status = "disabled";
|
||
};
|
||
|
||
&can1 {
|
||
assigned-clocks = <&cru CLK_CAN1>;
|
||
assigned-clock-rates = <150000000>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&can1m1_pins>;
|
||
status = "disabled";
|
||
};
|
||
|
||
&can2 {
|
||
assigned-clocks = <&cru CLK_CAN2>;
|
||
assigned-clock-rates = <150000000>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&can2m1_pins>;
|
||
status = "disabled";
|
||
};
|
||
|
||
|
||
&cpu0 {
|
||
cpu-supply = <&vdd_cpu>;
|
||
};
|
||
|
||
|
||
&dfi {
|
||
status = "okay";
|
||
};
|
||
|
||
|
||
&dmc {
|
||
center-supply = <&vdd_logic>;
|
||
status = "okay";
|
||
};
|
||
|
||
|
||
&gpu {
|
||
mali-supply = <&vdd_gpu>;
|
||
status = "okay";
|
||
};
|
||
|
||
|
||
&i2c0 {
|
||
status = "okay";
|
||
|
||
vdd_cpu: tcs4525@1c {
|
||
compatible = "tcs,tcs452x";
|
||
reg = <0x1c>;
|
||
vin-supply = <&vcc5v0_sys>;
|
||
regulator-compatible = "fan53555-reg";
|
||
regulator-name = "vdd_cpu";
|
||
regulator-min-microvolt = <712500>;
|
||
regulator-max-microvolt = <1390000>;
|
||
regulator-init-microvolt = <900000>;
|
||
regulator-ramp-delay = <2300>;
|
||
fcs,suspend-voltage-selector = <1>;
|
||
regulator-boot-on;
|
||
regulator-always-on;
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
rk809: pmic@20 {
|
||
compatible = "rockchip,rk809";
|
||
reg = <0x20>;
|
||
interrupt-parent = <&gpio0>;
|
||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
||
pinctrl-names = "default", "pmic-sleep",
|
||
"pmic-power-off", "pmic-reset";
|
||
pinctrl-0 = <&pmic_int>;
|
||
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
||
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
||
|
||
rockchip,system-power-controller;
|
||
wakeup-source;
|
||
#clock-cells = <1>;
|
||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||
//fb-inner-reg-idxs = <2>;
|
||
/* 1: rst regs (default in codes), 0: rst the pmic */
|
||
pmic-reset-func = <0>;
|
||
/* not save the PMIC_POWER_EN register in uboot */
|
||
not-save-power-en = <1>;
|
||
|
||
vcc1-supply = <&vcc3v3_sys>;
|
||
vcc2-supply = <&vcc3v3_sys>;
|
||
vcc3-supply = <&vcc3v3_sys>;
|
||
vcc4-supply = <&vcc3v3_sys>;
|
||
vcc5-supply = <&vcc3v3_sys>;
|
||
vcc6-supply = <&vcc3v3_sys>;
|
||
vcc7-supply = <&vcc3v3_sys>;
|
||
vcc8-supply = <&vcc3v3_sys>;
|
||
vcc9-supply = <&vcc3v3_sys>;
|
||
|
||
pwrkey {
|
||
status = "okay";
|
||
};
|
||
|
||
pinctrl_rk8xx: pinctrl_rk8xx {
|
||
gpio-controller;
|
||
#gpio-cells = <2>;
|
||
|
||
rk817_slppin_null: rk817_slppin_null {
|
||
pins = "gpio_slp";
|
||
function = "pin_fun0";
|
||
};
|
||
|
||
rk817_slppin_slp: rk817_slppin_slp {
|
||
pins = "gpio_slp";
|
||
function = "pin_fun1";
|
||
};
|
||
|
||
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||
pins = "gpio_slp";
|
||
function = "pin_fun2";
|
||
};
|
||
|
||
rk817_slppin_rst: rk817_slppin_rst {
|
||
pins = "gpio_slp";
|
||
function = "pin_fun3";
|
||
};
|
||
};
|
||
|
||
regulators {
|
||
vdd_logic: DCDC_REG1 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <500000>;
|
||
regulator-max-microvolt = <1350000>;
|
||
regulator-init-microvolt = <900000>;
|
||
regulator-ramp-delay = <6001>;
|
||
regulator-initial-mode = <0x2>;
|
||
regulator-name = "vdd_logic";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vdd_gpu: DCDC_REG2 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <500000>;
|
||
regulator-max-microvolt = <1350000>;
|
||
regulator-init-microvolt = <900000>;
|
||
regulator-ramp-delay = <6001>;
|
||
regulator-initial-mode = <0x2>;
|
||
regulator-name = "vdd_gpu";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcc_ddr: DCDC_REG3 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-initial-mode = <0x2>;
|
||
regulator-name = "vcc_ddr";
|
||
regulator-state-mem {
|
||
regulator-on-in-suspend;
|
||
};
|
||
};
|
||
|
||
vdd_npu: DCDC_REG4 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <500000>;
|
||
regulator-max-microvolt = <1350000>;
|
||
regulator-init-microvolt = <900000>;
|
||
regulator-ramp-delay = <6001>;
|
||
regulator-initial-mode = <0x2>;
|
||
regulator-name = "vdd_npu";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vdda0v9_image: LDO_REG1 {
|
||
regulator-boot-on;
|
||
regulator-always-on;
|
||
regulator-min-microvolt = <900000>;
|
||
regulator-max-microvolt = <900000>;
|
||
regulator-name = "vdda0v9_image";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vdda_0v9: LDO_REG2 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <900000>;
|
||
regulator-max-microvolt = <900000>;
|
||
regulator-name = "vdda_0v9";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vdda0v9_pmu: LDO_REG3 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <900000>;
|
||
regulator-max-microvolt = <900000>;
|
||
regulator-name = "vdda0v9_pmu";
|
||
regulator-state-mem {
|
||
regulator-on-in-suspend;
|
||
regulator-suspend-microvolt = <900000>;
|
||
};
|
||
};
|
||
|
||
vccio_acodec: LDO_REG4 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <3300000>;
|
||
regulator-max-microvolt = <3300000>;
|
||
regulator-name = "vccio_acodec";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vccio_sd: LDO_REG5 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <1800000>;
|
||
regulator-max-microvolt = <3300000>;
|
||
regulator-name = "vccio_sd";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcc3v3_pmu: LDO_REG6 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <3300000>;
|
||
regulator-max-microvolt = <3300000>;
|
||
regulator-name = "vcc3v3_pmu";
|
||
regulator-state-mem {
|
||
regulator-on-in-suspend;
|
||
regulator-suspend-microvolt = <3300000>;
|
||
};
|
||
};
|
||
|
||
vcca_1v8: LDO_REG7 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <1800000>;
|
||
regulator-max-microvolt = <1800000>;
|
||
regulator-name = "vcca_1v8";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcca1v8_pmu: LDO_REG8 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <1800000>;
|
||
regulator-max-microvolt = <1800000>;
|
||
regulator-name = "vcca1v8_pmu";
|
||
regulator-state-mem {
|
||
regulator-on-in-suspend;
|
||
regulator-suspend-microvolt = <1800000>;
|
||
};
|
||
};
|
||
|
||
vcca1v8_image: LDO_REG9 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <1800000>;
|
||
regulator-max-microvolt = <1800000>;
|
||
regulator-name = "vcca1v8_image";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcc_1v8: DCDC_REG5 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-min-microvolt = <1800000>;
|
||
regulator-max-microvolt = <1800000>;
|
||
regulator-name = "vcc_1v8";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcc_3v3: SWITCH_REG1 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-name = "vcc_3v3";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
|
||
vcc3v3_sd: SWITCH_REG2 {
|
||
regulator-always-on;
|
||
regulator-boot-on;
|
||
regulator-name = "vcc3v3_sd";
|
||
regulator-state-mem {
|
||
regulator-off-in-suspend;
|
||
};
|
||
};
|
||
};
|
||
|
||
rk809_codec: codec {
|
||
#sound-dai-cells = <0>;
|
||
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||
clocks = <&cru I2S1_MCLKOUT>;
|
||
clock-names = "mclk";
|
||
assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
|
||
assigned-clock-rates = <12288000>;
|
||
assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&i2s1m0_mclk>;
|
||
hp-volume = <20>;
|
||
spk-volume = <3>;
|
||
mic-in-differential;
|
||
status = "okay";
|
||
};
|
||
};
|
||
};
|
||
|
||
&i2s1_8ch {
|
||
status = "okay";
|
||
rockchip,clk-trcm = <1>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&i2s1m0_sclktx
|
||
&i2s1m0_lrcktx
|
||
&i2s1m0_sdi0
|
||
&i2s1m0_sdo0>;
|
||
};
|
||
|
||
&iep {
|
||
status = "okay";
|
||
};
|
||
|
||
&iep_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&jpegd {
|
||
status = "okay";
|
||
};
|
||
|
||
&jpegd_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&mpp_srv {
|
||
status = "okay";
|
||
};
|
||
|
||
&pinctrl {
|
||
|
||
pmic {
|
||
pmic_int: pmic_int {
|
||
rockchip,pins =
|
||
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
};
|
||
|
||
soc_slppin_gpio: soc_slppin_gpio {
|
||
rockchip,pins =
|
||
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
|
||
};
|
||
|
||
soc_slppin_slp: soc_slppin_slp {
|
||
rockchip,pins =
|
||
<0 RK_PA2 1 &pcfg_pull_up>;
|
||
};
|
||
|
||
soc_slppin_rst: soc_slppin_rst {
|
||
rockchip,pins =
|
||
<0 RK_PA2 2 &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
usb {
|
||
vcc5v0_host_en: vcc5v0-host-en {
|
||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
sdio-pwrseq {
|
||
wifi_enable_h: wifi-enable-h {
|
||
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
wireless-wlan {
|
||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||
rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
};
|
||
};
|
||
|
||
wireless-bluetooth {
|
||
uart1_gpios: uart1-gpios {
|
||
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
headphone {
|
||
hp_det: hp-det {
|
||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
xpt2046-touchscreen {
|
||
xpt2046_int_pin: xpt2046-int-pin {
|
||
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
|
||
spi3 {
|
||
spi3_cs0n: spi3-cs0n {
|
||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up_drv_level_2>;
|
||
};
|
||
|
||
spi3_cs1n: spi3-cs1n {
|
||
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_drv_level_2>;
|
||
};
|
||
};
|
||
|
||
ex39_usb {
|
||
ex39_usb_vcc5v0_host_en: ex39-usb-vcc5v0-host-en {
|
||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
};
|
||
};
|
||
};
|
||
|
||
&leds {
|
||
status = "okay";
|
||
};
|
||
|
||
&uart3 {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&uart3m1_xfer>;
|
||
};
|
||
|
||
&i2c2 {
|
||
status = "okay";
|
||
};
|
||
|
||
&i2c3 {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&i2c3m1_xfer>;
|
||
};
|
||
|
||
|
||
&spi3 {
|
||
status = "okay";
|
||
max-freq = <48000000>;
|
||
dma-names = "tx","rx";
|
||
pinctrl-names = "default", "high_speed";
|
||
pinctrl-0 = <&spi3_cs0n &spi3_cs1n &spi3m1_pins>;
|
||
pinctrl-1 = <&spi3_cs0n &spi3_cs1n &spi3m1_pins_hs>;
|
||
cs-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>, <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
|
||
|
||
spi0_dev@0 {
|
||
compatible = "rockchip,spidev";
|
||
reg = <0>;
|
||
spi-max-frequency = <12000000>;
|
||
spi-lsb-first;
|
||
status = "okay";
|
||
};
|
||
|
||
xpt2046@1 {
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&xpt2046_int_pin>;
|
||
reg = <1>;
|
||
compatible = "ti,ads7846";
|
||
interrupt-parent = <&gpio3>;
|
||
interrupts = <RK_PA6 0>;
|
||
spi-max-frequency = <1500000>;
|
||
pendown-gpio = <&gpio3 RK_PA6 0>;
|
||
ti,x-min = /bits/ 16 <0>;
|
||
ti,x-max = /bits/ 16 <0xfff>;
|
||
ti,y-min = /bits/ 16 <0>;
|
||
ti,y-max = /bits/ 16 <0xfff>;
|
||
ti,x-plate-ohms = /bits/ 16 <180>;
|
||
ti,pressure-max = /bits/ 16 <512>;
|
||
ti,debounce-max = /bits/ 16 <10>;
|
||
ti,debounce-tol = /bits/ 16 <30>;
|
||
ti,debounce-rep = /bits/ 16 <1>;
|
||
ti,settle-delay-usec = /bits/ 16 <150>;
|
||
ti,keep-vref-on = <1>;
|
||
/*
|
||
* Do not set to wakeup source,
|
||
* cause TL3568-EVM board will make xpt2046
|
||
* int pin level change when suspend, this
|
||
* will auto resume TL3568-EVM board.
|
||
*/
|
||
/delete-property/ linux,wakeup;
|
||
/delete-property/ wakeup-source;
|
||
};
|
||
};
|
||
|
||
&pwm8 {
|
||
status = "okay";
|
||
};
|
||
|
||
&pwm9 {
|
||
status = "okay";
|
||
};
|
||
|
||
&pwm14 {
|
||
status = "okay";
|
||
};
|
||
|
||
&pwm15 {
|
||
status = "okay";
|
||
compatible = "rockchip,remotectl-pwm";
|
||
remote_pwm_id = <3>;
|
||
handle_cpu_id = <1>;
|
||
remote_support_psci = <0>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&pwm15m0_pins>;
|
||
|
||
//how to：dmesg usercode=address&key_table=command
|
||
//echo 1 > sys/module/rockchip_pwm_remotectl/parameters/code_print
|
||
//find in include/dt-bindings/input/linux-event-codes.h
|
||
ir_key1 {
|
||
rockchip,usercode = <0xff00>;
|
||
rockchip,key_table =
|
||
<0xf2 KEY_MENU>,
|
||
<0xe9 KEY_BACK>,
|
||
<0xe3 KEY_ENTER>,
|
||
<0xe7 KEY_UP>,
|
||
<0xad KEY_DOWN>,
|
||
<0xf7 KEY_LEFT>,
|
||
<0xa5 KEY_RIGHT>,
|
||
<0xba KEY_1>,
|
||
<0xb9 KEY_2>,
|
||
<0xb8 KEY_3>,
|
||
<0xbb KEY_4>,
|
||
<0xbf KEY_5>,
|
||
<0xbc KEY_6>,
|
||
<0xf8 KEY_7>,
|
||
<0xea KEY_8>,
|
||
<0xf6 KEY_9>,
|
||
<0xe6 KEY_0>;
|
||
};
|
||
};
|
||
|
||
&usbhost_dwc3 {
|
||
phys = <&u2phy0_host>;
|
||
phy-names = "usb2-phy";
|
||
maximum-speed = "high-speed";
|
||
status = "okay";
|
||
};
|
||
&combphy1_usq {
|
||
rockchip,dis-u3otg1-port;
|
||
status = "okay";
|
||
};
|
||
|
||
&sata1 {
|
||
rockchip,enable-ssc;
|
||
status = "okay";
|
||
};
|
||
|
||
&rk_headset {
|
||
status = "okay";
|
||
};
|
||
|
||
&hdmi {
|
||
status = "okay";
|
||
rockchip,phy-table =
|
||
<92812500 0x8009 0x0000 0x0270>,
|
||
<165000000 0x800b 0x0000 0x026d>,
|
||
<185625000 0x800b 0x0000 0x01ed>,
|
||
<297000000 0x800b 0x0000 0x01ad>,
|
||
<594000000 0x8029 0x0000 0x0088>,
|
||
<000000000 0x0000 0x0000 0x0000>;
|
||
};
|
||
|
||
&hdmi_in_vp0 {
|
||
status = "okay";
|
||
};
|
||
|
||
&hdmi_in_vp1 {
|
||
status = "disabled";
|
||
};
|
||
|
||
&hdmi_sound {
|
||
status = "okay";
|
||
};
|
||
|
||
&i2s0_8ch {
|
||
status = "okay";
|
||
};
|
||
|
||
&route_hdmi {
|
||
status = "okay";
|
||
connect = <&vp0_out_hdmi>;
|
||
};
|
||
|
||
&gmac1 {
|
||
phy-mode = "rgmii";
|
||
clock_in_out = "output";
|
||
|
||
snps,reset-gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
||
snps,reset-active-low;
|
||
/* Reset time is 20ms, 100ms for rtl8211f */
|
||
snps,reset-delays-us = <0 20000 100000>;
|
||
|
||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
|
||
assigned-clock-rates = <0>, <125000000>;
|
||
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&gmac1m1_miim
|
||
&gmac1m1_tx_bus2
|
||
&gmac1m1_rx_bus2
|
||
&gmac1m1_rgmii_clk
|
||
&gmac1m1_rgmii_bus>;
|
||
|
||
tx_delay = <0x4f>;
|
||
rx_delay = <0x25>;
|
||
|
||
phy-handle = <&rgmii_phy0>;
|
||
status = "okay";
|
||
};
|
||
|
||
&mdio1 {
|
||
rgmii_phy0: phy@0 {
|
||
compatible = "ethernet-phy-ieee802.3-c22";
|
||
reg = <0x0>;
|
||
};
|
||
};
|
||
|
||
&pmu_io_domains {
|
||
status = "okay";
|
||
pmuio2-supply = <&vcc3v3_pmu>;
|
||
vccio1-supply = <&vccio_acodec>;
|
||
vccio3-supply = <&vccio_sd>;
|
||
vccio4-supply = <&vcc_1v8>;//wucaicheng wifi VCCIO_WL 0¦¸=1V8
|
||
vccio5-supply = <&vcc_3v3>;
|
||
vccio6-supply = <&vcc_1v8>;//wucaicheng PHY 0¦¸=1V8
|
||
vccio7-supply = <&vcc_3v3>;
|
||
};
|
||
|
||
&rk_rga {
|
||
status = "okay";
|
||
};
|
||
|
||
&rkvdec {
|
||
status = "okay";
|
||
};
|
||
|
||
&rkvdec_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&rkvenc {
|
||
venc-supply = <&vdd_logic>;
|
||
status = "okay";
|
||
};
|
||
|
||
&rkvenc_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&rknpu {
|
||
rknpu-supply = <&vdd_npu>;
|
||
status = "okay";
|
||
};
|
||
|
||
&rknpu_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&saradc {
|
||
status = "okay";
|
||
vref-supply = <&vcca_1v8>;
|
||
};
|
||
|
||
&sdhci {
|
||
bus-width = <8>;
|
||
supports-emmc;
|
||
non-removable;
|
||
max-frequency = <200000000>;
|
||
status = "okay";
|
||
};
|
||
|
||
&nandc0 {
|
||
#address-cells = <1>;
|
||
#size-cells = <0>;
|
||
status = "disabled";
|
||
|
||
nand@0 {
|
||
reg = <0>;
|
||
nand-bus-width = <8>;
|
||
nand-ecc-mode = "hw";
|
||
nand-ecc-strength = <16>;
|
||
nand-ecc-step-size = <1024>;
|
||
};
|
||
};
|
||
|
||
&sfc {
|
||
status = "disabled";
|
||
};
|
||
|
||
&sdmmc0 {
|
||
max-frequency = <150000000>;
|
||
supports-sd;
|
||
bus-width = <4>;
|
||
cap-mmc-highspeed;
|
||
cap-sd-highspeed;
|
||
disable-wp;
|
||
sd-uhs-sdr104;
|
||
vmmc-supply = <&vcc3v3_sd>;
|
||
vqmmc-supply = <&vccio_sd>;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||
status = "okay";
|
||
};
|
||
|
||
&sdmmc1 {
|
||
max-frequency = <150000000>;
|
||
supports-sdio;
|
||
bus-width = <4>;
|
||
disable-wp;
|
||
cap-sd-highspeed;
|
||
cap-sdio-irq;
|
||
keep-power-in-suspend;
|
||
mmc-pwrseq = <&sdio_pwrseq>;
|
||
non-removable;
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||
sd-uhs-sdr104;
|
||
status = "okay";
|
||
};
|
||
|
||
&sdmmc2 {
|
||
status = "disabled";
|
||
};
|
||
|
||
&spdif_8ch {
|
||
status = "disabled";
|
||
};
|
||
|
||
&tsadc {
|
||
status = "okay";
|
||
};
|
||
|
||
&u2phy0_host {
|
||
phy-supply = <&vcc5v0_host>;
|
||
status = "okay";
|
||
};
|
||
|
||
&u2phy0_otg {
|
||
status = "okay";
|
||
};
|
||
|
||
&u2phy1_host {
|
||
phy-supply = <&vcc5v0_host>;
|
||
status = "okay";
|
||
};
|
||
|
||
&u2phy1_otg {
|
||
phy-supply = <&vcc5v0_host>;
|
||
status = "okay";
|
||
};
|
||
|
||
&usb2phy0 {
|
||
status = "okay";
|
||
};
|
||
|
||
&usb2phy1 {
|
||
status = "okay";
|
||
};
|
||
|
||
&usb_host0_ehci {
|
||
status = "okay";
|
||
};
|
||
|
||
&usb_host0_ohci {
|
||
status = "okay";
|
||
};
|
||
|
||
&usb_host1_ehci {
|
||
status = "okay";
|
||
};
|
||
|
||
&usb_host1_ohci {
|
||
status = "okay";
|
||
};
|
||
|
||
&usbdrd_dwc3 {
|
||
dr_mode = "otg";
|
||
extcon = <&usb2phy0>;
|
||
status = "okay";
|
||
};
|
||
|
||
&usbdrd30 {
|
||
status = "okay";
|
||
};
|
||
|
||
&usbhost_dwc3 {
|
||
status = "okay";
|
||
};
|
||
|
||
&usbhost30 {
|
||
status = "okay";
|
||
};
|
||
|
||
&vad {
|
||
rockchip,audio-src = <&i2s1_8ch>;
|
||
rockchip,buffer-time-ms = <128>;
|
||
rockchip,det-channel = <0>;
|
||
rockchip,mode = <0>;
|
||
};
|
||
|
||
&vdpu {
|
||
status = "okay";
|
||
};
|
||
|
||
&vdpu_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&vepu {
|
||
status = "okay";
|
||
};
|
||
|
||
&vepu_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&vop {
|
||
status = "okay";
|
||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||
};
|
||
|
||
&vop_mmu {
|
||
status = "okay";
|
||
};
|
||
|
||
&uart1 {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
|
||
};
|