663 lines
12 KiB
Plaintext
663 lines
12 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3328.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Rockchip RK3328 EVB";
|
|
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
|
|
|
|
aliases {
|
|
mmc0 = &sdmmc;
|
|
mmc1 = &sdio;
|
|
mmc2 = &emmc;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon=uart8250,mmio32,0xff130000 swiotlb=1 kpti=0 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait coherent_pool=1m";
|
|
};
|
|
|
|
fiq-debugger {
|
|
compatible = "rockchip,fiq-debugger";
|
|
rockchip,serial-id = <2>;
|
|
rockchip,signal-irq = <159>;
|
|
rockchip,wake-irq = <0>;
|
|
/* If enable uart uses irq instead of fiq */
|
|
rockchip,irq-mode-enable = <1>;
|
|
rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
drm_logo: drm-logo@0 {
|
|
compatible = "rockchip,drm-logo";
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
ramoops: ramoops@110000 {
|
|
compatible = "ramoops";
|
|
reg = <0x0 0x110000 0x0 0xf0000>;
|
|
record-size = <0x20000>;
|
|
console-size = <0x80000>;
|
|
ftrace-size = <0x00000>;
|
|
pmsg-size = <0x50000>;
|
|
};
|
|
};
|
|
|
|
dc_12v: dc-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "dc_12v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
|
|
/*
|
|
* On the module itself this is one of these (depending
|
|
* on the actual card populated):
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
* - PDN (power down when low)
|
|
*/
|
|
reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc_host_vbus: host-vbus-regulator {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&host_vbus_drv>;
|
|
regulator-name = "vcc_host_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vcc_phy: vcc-phy-regulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_phy";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vcc_sd: sdmmc-regulator {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0m1_pin>;
|
|
regulator-name = "vcc_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&dc_12v>;
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
compatible = "bluetooth-platdata";
|
|
clocks = <&rk805 1>;
|
|
clock-names = "ext_clock";
|
|
uart_rts_gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default", "rts_gpio";
|
|
pinctrl-0 = <&uart0_rts>;
|
|
pinctrl-1 = <&uart0_gpios>;
|
|
BT,power_gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
|
BT,wake_host_irq = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
wireless-wlan {
|
|
compatible = "wlan-platdata";
|
|
rockchip,grf = <&grf>;
|
|
wifi_chip_type = "ap6354";
|
|
sdio_vref = <1800>;
|
|
WIFI,host_wake_irq = <&gpio1 19 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&analog_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&avsd {
|
|
status = "okay";
|
|
};
|
|
|
|
&cif {
|
|
status = "disabled";
|
|
};
|
|
|
|
&codec {
|
|
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_arm>;
|
|
};
|
|
|
|
&dfi {
|
|
status = "okay";
|
|
};
|
|
|
|
&display_subsystem {
|
|
logo-memory-region = <&drm_logo>;
|
|
status = "okay";
|
|
|
|
route {
|
|
route_hdmi: route-hdmi {
|
|
status = "okay";
|
|
logo,uboot = "logo.bmp";
|
|
logo,kernel = "logo_kernel.bmp";
|
|
logo,mode = "fullscreen";
|
|
charge_logo,mode = "fullscreen";
|
|
connect = <&vop_out_hdmi>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dmc {
|
|
center-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
supports-emmc;
|
|
disable-wp;
|
|
non-removable;
|
|
num-slots = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac2io {
|
|
phy-supply = <&vcc_phy>;
|
|
phy-mode = "rgmii";
|
|
clock_in_out = "input";
|
|
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 10000 50000>;
|
|
assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rgmiim1_pins>;
|
|
tx_delay = <0x26>;
|
|
rx_delay = <0x11>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&gmac2phy {
|
|
phy-supply = <&vcc_phy>;
|
|
clock_in_out = "output";
|
|
assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
|
|
assigned-clock-rate = <50000000>;
|
|
assigned-clocks = <&cru SCLK_MAC2PHY>;
|
|
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
#sound-dai-cells = <0>;
|
|
ddc-i2c-scl-high-time-ns = <9625>;
|
|
ddc-i2c-scl-low-time-ns = <10000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmiphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
rk805: pmic@18 {
|
|
compatible = "rockchip,rk805";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "rk805-clkout1", "rk805-clkout2";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
rockchip,system-power-controller;
|
|
wakeup-source;
|
|
status = "okay";
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc5-supply = <&vcc_io>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
|
|
rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vdd_arm: DCDC_REG2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1450000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_io: DCDC_REG4 {
|
|
regulator-name = "vcc_io";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_18: LDO_REG1 {
|
|
regulator-name = "vcc_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcc18_emmc: LDO_REG2 {
|
|
regulator-name = "vcc18_emmc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_10: LDO_REG3 {
|
|
regulator-name = "vdd_10";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0 {
|
|
#sound-dai-cells = <0>;
|
|
rockchip,bclk-fs = <128>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s1 {
|
|
#sound-dai-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&io_domains {
|
|
status = "okay";
|
|
|
|
vccio1-supply = <&vcc_io>;
|
|
vccio2-supply = <&vcc18_emmc>;
|
|
vccio3-supply = <&vcc_io>;
|
|
vccio4-supply = <&vcc_18>;
|
|
vccio5-supply = <&vcc_io>;
|
|
vccio6-supply = <&vcc_io>;
|
|
pmuio-supply = <&vcc_io>;
|
|
};
|
|
|
|
&mpp_srv {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
host_vbus_drv: host-vbus-drv {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
otg_vbus_drv: otg-vbus-drv {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
uart0_gpios: uart0-gpios {
|
|
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm3 {
|
|
status = "okay";
|
|
compatible = "rockchip,remotectl-pwm";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwmir_pin>;
|
|
remote_pwm_id = <3>;
|
|
handle_cpu_id = <1>;
|
|
remote_support_psci = <1>;
|
|
|
|
ir_key1 {
|
|
rockchip,usercode = <0x4040>;
|
|
rockchip,key_table =
|
|
<0xf2 KEY_REPLY>,
|
|
<0xba KEY_BACK>,
|
|
<0xf4 KEY_UP>,
|
|
<0xf1 KEY_DOWN>,
|
|
<0xef KEY_LEFT>,
|
|
<0xee KEY_RIGHT>,
|
|
<0xbd KEY_HOME>,
|
|
<0xea KEY_VOLUMEUP>,
|
|
<0xe3 KEY_VOLUMEDOWN>,
|
|
<0xe2 KEY_SEARCH>,
|
|
<0xb2 KEY_POWER>,
|
|
<0xbc KEY_MUTE>,
|
|
<0xec KEY_MENU>,
|
|
<0xbf 0x190>,
|
|
<0xe0 0x191>,
|
|
<0xe1 0x192>,
|
|
<0xe9 183>,
|
|
<0xe6 248>,
|
|
<0xe8 185>,
|
|
<0xe7 186>,
|
|
<0xf0 388>,
|
|
<0xbe 0x175>;
|
|
};
|
|
|
|
ir_key2 {
|
|
rockchip,usercode = <0xff00>;
|
|
rockchip,key_table =
|
|
<0x39 KEY_POWER>,
|
|
<0x73 KEY_MUTE>,
|
|
<0xa4 KEY_PLAYPAUSE>,
|
|
<0x75 KEY_VOLUMEDOWN>,
|
|
<0x77 KEY_VOLUMEUP>,
|
|
<0x7d KEY_MENU>,
|
|
<0xf9 KEY_HOME>,
|
|
<0x5f KEY_BACK>,
|
|
<0xb9 KEY_UP>,
|
|
<0xe9 KEY_DOWN>,
|
|
<0xb8 KEY_LEFT>,
|
|
<0xea KEY_RIGHT>,
|
|
<0xaa KEY_REPLY>,
|
|
<0x55 KEY_1>,
|
|
<0x5b KEY_2>,
|
|
<0xf8 KEY_3>,
|
|
<0x57 KEY_4>,
|
|
<0xed KEY_5>,
|
|
<0xee KEY_6>,
|
|
<0x59 KEY_7>,
|
|
<0xf1 KEY_8>,
|
|
<0xf2 KEY_9>,
|
|
<0xe0 KEY_BACKSPACE>,
|
|
<0x79 KEY_0>,
|
|
<0xa4 KEY_SETUP>;
|
|
};
|
|
|
|
ir_key3 {
|
|
rockchip,usercode = <0x1dcc>;
|
|
rockchip,key_table =
|
|
<0xee KEY_REPLY>,
|
|
<0xf0 KEY_BACK>,
|
|
<0xf8 KEY_UP>,
|
|
<0xbb KEY_DOWN>,
|
|
<0xef KEY_LEFT>,
|
|
<0xed KEY_RIGHT>,
|
|
<0xfc KEY_HOME>,
|
|
<0xf1 KEY_VOLUMEUP>,
|
|
<0xfd KEY_VOLUMEDOWN>,
|
|
<0xb7 KEY_SEARCH>,
|
|
<0xff KEY_POWER>,
|
|
<0xf3 KEY_MUTE>,
|
|
<0xbf KEY_MENU>,
|
|
<0xf9 0x191>,
|
|
<0xf5 0x192>,
|
|
<0xb3 388>,
|
|
<0xbe KEY_1>,
|
|
<0xba KEY_2>,
|
|
<0xb2 KEY_3>,
|
|
<0xbd KEY_4>,
|
|
<0xf9 KEY_5>,
|
|
<0xb1 KEY_6>,
|
|
<0xfc KEY_7>,
|
|
<0xf8 KEY_8>,
|
|
<0xb0 KEY_9>,
|
|
<0xb6 KEY_0>,
|
|
<0xb5 KEY_BACKSPACE>;
|
|
};
|
|
};
|
|
|
|
&rga {
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec {
|
|
vcodec-supply = <&vdd_logic>;
|
|
status = "okay";
|
|
};
|
|
|
|
&rkvdec_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&rockchip_suspend {
|
|
rockchip,virtual-poweroff = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_18>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
max-frequency = <150000000>;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
|
no-mmc;
|
|
no-sd;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
max-frequency = <150000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
vmmc-supply = <&vcc_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spdif {
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy_host {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy {
|
|
vbus-supply = <&vcc_host_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy_pipe {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy_utmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb20_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd_dwc3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&vdpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vpu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vepu_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|