388 lines
11 KiB
YAML
388 lines
11 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung S3C/S5P/Exynos SoC pin controller
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
- Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
- Tomasz Figa <tomasz.figa@gmail.com>
|
|
|
|
description: |
|
|
This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
|
|
controller.
|
|
|
|
All the pin controller nodes should be represented in the aliases node using
|
|
the following format 'pinctrl{n}' where n is a unique number for the alias.
|
|
|
|
The controller supports three types of interrupts::
|
|
- External GPIO interrupts (see interrupts property in pin controller node);
|
|
|
|
- External wake-up interrupts - multiplexed (capable of waking up the system
|
|
see interrupts property in external wake-up interrupt controller node -
|
|
samsung,pinctrl-wakeup-interrupt.yaml);
|
|
|
|
- External wake-up interrupts - direct (capable of waking up the system, see
|
|
interrupts property in every bank of pin controller with external wake-up
|
|
interrupt controller - samsung,pinctrl-gpio-bank.yaml).
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^pinctrl(@.*)?"
|
|
|
|
compatible:
|
|
enum:
|
|
- samsung,s3c2412-pinctrl
|
|
- samsung,s3c2416-pinctrl
|
|
- samsung,s3c2440-pinctrl
|
|
- samsung,s3c2450-pinctrl
|
|
- samsung,s3c64xx-pinctrl
|
|
- samsung,s5pv210-pinctrl
|
|
- samsung,exynos3250-pinctrl
|
|
- samsung,exynos4210-pinctrl
|
|
- samsung,exynos4x12-pinctrl
|
|
- samsung,exynos5250-pinctrl
|
|
- samsung,exynos5260-pinctrl
|
|
- samsung,exynos5410-pinctrl
|
|
- samsung,exynos5420-pinctrl
|
|
- samsung,exynos5433-pinctrl
|
|
- samsung,exynos7-pinctrl
|
|
- samsung,exynos7885-pinctrl
|
|
- samsung,exynos850-pinctrl
|
|
- samsung,exynosautov9-pinctrl
|
|
- tesla,fsd-pinctrl
|
|
|
|
interrupts:
|
|
description:
|
|
Required for GPIO banks supporting external GPIO interrupts.
|
|
maxItems: 1
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
reg:
|
|
description:
|
|
Second base address of the pin controller if the specific registers of
|
|
the pin controller are separated into the different base address.
|
|
Only certain banks of certain pin controller might need it.
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
wakeup-interrupt-controller:
|
|
$ref: samsung,pinctrl-wakeup-interrupt.yaml
|
|
|
|
patternProperties:
|
|
"^[a-z]+[0-9]*-gpio-bank$":
|
|
description:
|
|
Pin banks of the controller are represented by child nodes of the
|
|
controller node. Bank name is taken from name of the node.
|
|
$ref: samsung,pinctrl-gpio-bank.yaml
|
|
|
|
"^[a-z0-9-]+-pins$":
|
|
oneOf:
|
|
- $ref: samsung,pinctrl-pins-cfg.yaml
|
|
required:
|
|
- samsung,pins
|
|
- type: object
|
|
patternProperties:
|
|
"^[a-z0-9-]+-pins$":
|
|
$ref: samsung,pinctrl-pins-cfg.yaml
|
|
|
|
additionalProperties: false
|
|
|
|
"^(initial|sleep)-state$":
|
|
type: object
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
|
|
$ref: samsung,pinctrl-pins-cfg.yaml
|
|
|
|
properties:
|
|
samsung,pins:
|
|
description: See samsung,pinctrl-pins-cfg.yaml
|
|
$ref: /schemas/types.yaml#/definitions/string-array
|
|
maxItems: 1
|
|
|
|
required:
|
|
- samsung,pins
|
|
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: samsung,exynos5433-pinctrl
|
|
then:
|
|
properties:
|
|
reg:
|
|
minItems: 1
|
|
maxItems: 2
|
|
else:
|
|
properties:
|
|
reg:
|
|
minItems: 1
|
|
maxItems: 1
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
pinctrl@7f008000 {
|
|
compatible = "samsung,s3c64xx-pinctrl";
|
|
reg = <0x7f008000 0x1000>;
|
|
interrupt-parent = <&vic1>;
|
|
interrupts = <21>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,s3c64xx-wakeup-eint";
|
|
interrupts-extended = <&vic0 0>,
|
|
<&vic0 1>,
|
|
<&vic1 0>,
|
|
<&vic1 1>;
|
|
};
|
|
|
|
/* Pin bank with external GPIO or muxed external wake-up interrupts */
|
|
gpa-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// ...
|
|
|
|
uart0-data-pins {
|
|
samsung,pins = "gpa-0", "gpa-1";
|
|
samsung,pin-function = <2>;
|
|
samsung,pin-pud = <0>;
|
|
};
|
|
|
|
// ...
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pinctrl@11400000 {
|
|
compatible = "samsung,exynos4210-pinctrl";
|
|
reg = <0x11400000 0x1000>;
|
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sleep0>;
|
|
|
|
/* Pin bank with external GPIO or muxed external wake-up interrupts */
|
|
gpa0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// ...
|
|
|
|
uart0-data-pins {
|
|
samsung,pins = "gpa0-0", "gpa0-1";
|
|
samsung,pin-function = <2>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
// ...
|
|
|
|
sleep0: sleep-state {
|
|
gpa0-0-pin {
|
|
samsung,pins = "gpa0-0";
|
|
samsung,pin-con-pdn = <2>;
|
|
samsung,pin-pud-pdn = <0>;
|
|
};
|
|
|
|
gpa0-1-pin {
|
|
samsung,pins = "gpa0-1";
|
|
samsung,pin-con-pdn = <0>;
|
|
samsung,pin-pud-pdn = <0>;
|
|
};
|
|
|
|
// ...
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pinctrl@11000000 {
|
|
compatible = "samsung,exynos4210-pinctrl";
|
|
reg = <0x11000000 0x1000>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos4210-wakeup-eint";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
/* Pin bank with external GPIO or muxed external wake-up interrupts */
|
|
gpj0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
/* Pin bank without external interrupts */
|
|
gpy0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
/* Pin bank with external direct wake-up interrupts */
|
|
gpx0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// ...
|
|
|
|
sd0-clk-pins {
|
|
samsung,pins = "gpk0-0";
|
|
samsung,pin-function = <2>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <3>;
|
|
};
|
|
|
|
sd4-bus-width8-pins {
|
|
part-1-pins {
|
|
samsung,pins = "gpk0-3", "gpk0-4",
|
|
"gpk0-5", "gpk0-6";
|
|
samsung,pin-function = <3>;
|
|
samsung,pin-pud = <3>;
|
|
samsung,pin-drv = <3>;
|
|
};
|
|
|
|
part-2-pins {
|
|
samsung,pins = "gpk1-3", "gpk1-4",
|
|
"gpk1-5", "gpk1-6";
|
|
samsung,pin-function = <4>;
|
|
samsung,pin-pud = <3>;
|
|
samsung,pin-drv = <3>;
|
|
};
|
|
};
|
|
|
|
// ...
|
|
|
|
otg-gp-pins {
|
|
samsung,pins = "gpx3-3";
|
|
samsung,pin-function = <1>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
samsung,pin-val = <0>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pinctrl@10580000 {
|
|
compatible = "samsung,exynos5433-pinctrl";
|
|
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&initial_alive>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynos7-wakeup-eint";
|
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
/* Pin bank with external direct wake-up interrupts */
|
|
gpa0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupt-controller;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// ...
|
|
|
|
te-irq-pins {
|
|
samsung,pins = "gpf1-3";
|
|
samsung,pin-function = <0xf>;
|
|
};
|
|
|
|
// ..
|
|
|
|
initial_alive: initial-state {
|
|
gpa0-0-pin {
|
|
samsung,pins = "gpa0-0";
|
|
samsung,pin-function = <0>;
|
|
samsung,pin-pud = <1>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
// ...
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
pinctrl@114b0000 {
|
|
compatible = "samsung,exynos5433-pinctrl";
|
|
reg = <0x114b0000 0x1000>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&pd_aud>;
|
|
|
|
/* Pin bank with external GPIO or muxed external wake-up interrupts */
|
|
gpz0-gpio-bank {
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
// ...
|
|
|
|
i2s0-bus-pins {
|
|
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
|
|
"gpz0-4", "gpz0-5", "gpz0-6";
|
|
samsung,pin-function = <2>;
|
|
samsung,pin-pud = <0>;
|
|
samsung,pin-drv = <0>;
|
|
};
|
|
|
|
// ...
|
|
};
|