184 lines
5.7 KiB
YAML
184 lines
5.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Mediatek MT8192 Pin Controller
|
|
|
|
maintainers:
|
|
- Sean Wang <sean.wang@mediatek.com>
|
|
|
|
description: |
|
|
The Mediatek's Pin controller is used to control SoC pins.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mediatek,mt8192-pinctrl
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
description: |
|
|
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
|
|
the amount of cells must be specified as 2. See the below
|
|
mentioned gpio binding representation for description of particular cells.
|
|
const: 2
|
|
|
|
gpio-ranges:
|
|
description: gpio valid number range.
|
|
maxItems: 1
|
|
|
|
gpio-line-names: true
|
|
|
|
reg:
|
|
description: |
|
|
Physical address base for gpio base registers. There are 11 GPIO
|
|
physical address base in mt8192.
|
|
maxItems: 11
|
|
|
|
reg-names:
|
|
description: |
|
|
Gpio base register names.
|
|
maxItems: 11
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
interrupts:
|
|
description: The interrupt outputs to sysirq.
|
|
maxItems: 1
|
|
|
|
#PIN CONFIGURATION NODES
|
|
patternProperties:
|
|
'-pins$':
|
|
type: object
|
|
additionalProperties: false
|
|
patternProperties:
|
|
'^pins':
|
|
type: object
|
|
description: |
|
|
A pinctrl node should contain at least one subnodes representing the
|
|
pinctrl groups available on the machine. Each subnode will list the
|
|
pins it needs, and how they should be configured, with regard to muxer
|
|
configuration, pullups, drive strength, input enable/disable and
|
|
input schmitt.
|
|
$ref: "pinmux-node.yaml"
|
|
|
|
properties:
|
|
pinmux:
|
|
description: |
|
|
Integer array, represents gpio pin number and mux setting.
|
|
Supported pin number and mux varies for different SoCs, and are defined
|
|
as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
|
|
|
|
drive-strength:
|
|
description: |
|
|
It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
|
|
dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
|
|
enum: [2, 4, 6, 8, 10, 12, 14, 16]
|
|
|
|
drive-strength-microamp:
|
|
enum: [125, 250, 500, 1000]
|
|
|
|
bias-pull-down:
|
|
oneOf:
|
|
- type: boolean
|
|
description: normal pull down.
|
|
- enum: [100, 101, 102, 103]
|
|
description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
|
|
defines in dt-bindings/pinctrl/mt65xx.h.
|
|
- enum: [200, 201, 202, 203]
|
|
description: RSEL pull down type. See MTK_PULL_SET_RSEL_
|
|
defines in dt-bindings/pinctrl/mt65xx.h.
|
|
|
|
bias-pull-up:
|
|
oneOf:
|
|
- type: boolean
|
|
description: normal pull up.
|
|
- enum: [100, 101, 102, 103]
|
|
description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
|
|
defines in dt-bindings/pinctrl/mt65xx.h.
|
|
- enum: [200, 201, 202, 203]
|
|
description: RSEL pull up type. See MTK_PULL_SET_RSEL_
|
|
defines in dt-bindings/pinctrl/mt65xx.h.
|
|
|
|
bias-disable: true
|
|
|
|
output-high: true
|
|
|
|
output-low: true
|
|
|
|
input-enable: true
|
|
|
|
input-disable: true
|
|
|
|
input-schmitt-enable: true
|
|
|
|
input-schmitt-disable: true
|
|
|
|
required:
|
|
- pinmux
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: "pinctrl.yaml#"
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
- '#interrupt-cells'
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- gpio-ranges
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
pio: pinctrl@10005000 {
|
|
compatible = "mediatek,mt8192-pinctrl";
|
|
reg = <0x10005000 0x1000>,
|
|
<0x11c20000 0x1000>,
|
|
<0x11d10000 0x1000>,
|
|
<0x11d30000 0x1000>,
|
|
<0x11d40000 0x1000>,
|
|
<0x11e20000 0x1000>,
|
|
<0x11e70000 0x1000>,
|
|
<0x11ea0000 0x1000>,
|
|
<0x11f20000 0x1000>,
|
|
<0x11f30000 0x1000>,
|
|
<0x1000b000 0x1000>;
|
|
reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
|
|
"iocfg_bl", "iocfg_br", "iocfg_lm",
|
|
"iocfg_lb", "iocfg_rt", "iocfg_lt",
|
|
"iocfg_tl", "eint";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pio 0 0 220>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
|
|
#interrupt-cells = <2>;
|
|
|
|
spi1-default-pins {
|
|
pins-cs-mosi-clk {
|
|
pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
|
|
<PINMUX_GPIO159__FUNC_SPI1_A_MO>,
|
|
<PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
|
|
bias-disable;
|
|
};
|
|
|
|
pins-miso {
|
|
pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|