// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2021 Rockchip Electronics Co., Ltd. * */ #include "dt-bindings/usb/pd.h" #include "rk3588s.dtsi" #include "rk3588s-evb.dtsi" #include "rk3588-rk806-single.dtsi" / { combophy_avdd0v85: combophy-avdd0v85 { compatible = "regulator-fixed"; regulator-name = "combophy_avdd0v85"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; vin-supply = <&vdd_0v85_s0>; }; combophy_avdd1v8: combophy-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "combophy_avdd1v8"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&avcc_1v8_s0>; }; es7202_sound_micarray: es7202-sound-micarray { status = "okay"; compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "rockchip,sound-micarray"; simple-audio-card,mclk-fs = <256>; simple-audio-card,dai-link@0 { format = "pdm"; cpu { sound-dai = <&pdm0>; }; codec { sound-dai = <&es7202>; }; }; }; es8388_sound: es8388-sound { status = "okay"; compatible = "rockchip,multicodecs-card"; rockchip,card-name = "rockchip-es8388"; hp-det-gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; io-channels = <&saradc 3>; io-channel-names = "adc-detect"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; spk-con-gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; hp-con-gpio = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; rockchip,format = "i2s"; rockchip,mclk-fs = <256>; rockchip,cpu = <&i2s0_8ch>; rockchip,codec = <&es8388>; rockchip,audio-routing = "Headphone", "LOUT1", "Headphone", "ROUT1", "Speaker", "LOUT2", "Speaker", "ROUT2", "Headphone", "Headphone Power", "Headphone", "Headphone Power", "Speaker", "Speaker Power", "Speaker", "Speaker Power", "LINPUT1", "Main Mic", "LINPUT2", "Main Mic", "RINPUT1", "Headset Mic", "RINPUT2", "Headset Mic"; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; play-pause-key { label = "playpause"; linux,code = ; press-threshold-microvolt = <2000>; }; }; fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; pwms = <&pwm11 0 50000 0>; cooling-levels = <0 50 100 150 200 255>; rockchip,temp-trips = < 50000 1 55000 2 60000 3 65000 4 70000 5 >; }; panel-edp { compatible = "simple-panel"; backlight = <&backlight>; power-supply = <&vcc3v3_lcd_edp>; prepare-delay-ms = <120>; enable-delay-ms = <120>; unprepare-delay-ms = <120>; disable-delay-ms = <120>; width-mm = <120>; height-mm = <160>; panel-timing { clock-frequency = <200000000>; hactive = <1536>; vactive = <2048>; hfront-porch = <12>; hsync-len = <16>; hback-porch = <48>; vfront-porch = <8>; vsync-len = <4>; vback-porch = <8>; hsync-active = <0>; vsync-active = <0>; de-active = <0>; pixelclk-active = <0>; }; port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; }; }; }; vbus5v0_typec: vbus5v0-typec { compatible = "regulator-fixed"; regulator-name = "vbus5v0_typec"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&typec5v_pwren>; }; vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_1v1_nldo_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; vin-supply = <&vcc5v0_sys>; }; vcc3v3_lcd_edp: vcc3v3-lcd-edp { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd_edp"; gpio = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-boot-on; vin-supply = <&vcc_3v3_s3>; }; vcc3v3_pcie20: vcc3v3-pcie20 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie20"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; startup-delay-us = <5000>; vin-supply = <&vcc12v_dcin>; }; vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sd_s0_pwr>; regulator-name = "vcc_3v3_sd_s0"; enable-active-high; }; vcc5v0_host: vcc5v0-host { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; }; wireless_bluetooth: wireless-bluetooth { compatible = "bluetooth-platdata"; clocks = <&hym8563>; clock-names = "ext_clock"; uart_rts_gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "rts_gpio"; pinctrl-0 = <&uart8m1_rtsn>, <&bt_gpio>; pinctrl-1 = <&uart8_gpios>; BT,reset_gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; BT,wake_gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; BT,wake_host_irq = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; status = "okay"; }; wireless_wlan: wireless-wlan { compatible = "wlan-platdata"; wifi_chip_type = "ap6275p"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>, <&wifi_poweren_gpio>; WIFI,host_wake_irq = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; WIFI,poweren_gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; &backlight { pwms = <&pwm12 0 25000 0>; power-supply = <&vcc3v3_lcd_edp>; status = "okay"; }; &combphy0_ps { status = "okay"; }; &dp0 { status = "okay"; }; &dp0_in_vp1 { status = "okay"; }; &dp0_sound{ status = "okay"; }; &edp0 { force-hpd; status = "okay"; ports { port@1 { reg = <1>; edp_out_panel: endpoint { remote-endpoint = <&panel_in_edp>; }; }; }; }; &edp0_in_vp2 { status = "okay"; }; &hdptxphy0 { /* Single Vdiff Training Table for power reduction (optional) */ training-table = /bits/ 8 < /* voltage swing 0, pre-emphasis 0->3 */ 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 /* voltage swing 1, pre-emphasis 0->2 */ 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 /* voltage swing 2, pre-emphasis 0->1 */ 0x0d 0x00 0x00 0x00 0x00 0x00 0x0d 0x00 0x00 0x00 0x00 0x00 /* voltage swing 3, pre-emphasis 0 */ 0x0d 0x00 0x00 0x00 0x00 0x00 >; status = "okay"; }; &i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; vdd_cpu_big0_s0: vdd_cpu_big0_mem_s0: rk8602@42 { compatible = "rockchip,rk8602"; reg = <0x42>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "rk860x-reg"; regulator-name = "vdd_cpu_big0_s0"; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; rockchip,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_big1_s0: vdd_cpu_big1_mem_s0: rk8603@43 { compatible = "rockchip,rk8603"; reg = <0x43>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "rk860x-reg"; regulator-name = "vdd_cpu_big1_s0"; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; rockchip,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c2 { status = "okay"; vdd_npu_s0: vdd_npu_mem_s0: rk8602@42 { compatible = "rockchip,rk8602"; reg = <0x42>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "rk860x-reg"; regulator-name = "vdd_npu_s0"; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <2300>; rockchip,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c3 { status = "okay"; es8388: es8388@11 { status = "okay"; #sound-dai-cells = <0>; compatible = "everest,es8388", "everest,es8323"; reg = <0x11>; clocks = <&mclkout_i2s0>; clock-names = "mclk"; assigned-clocks = <&mclkout_i2s0>; assigned-clock-rates = <12288000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_mclk>; }; es7202: es7202@32 { status = "okay"; #sound-dai-cells = <0>; compatible = "ES7202_PDM_ADC_1"; power-supply = <&vcc_1v8_s0>; /* only 1v8 or 3v3, default is 3v3 */ reg = <0x32>; }; }; &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4m3_xfer>; status = "okay"; gsl3673@40 { compatible = "GSL,GSL3673"; reg = <0x40>; screen_max_x = <1536>; screen_max_y = <2048>; irq_gpio_number = <&gpio1 RK_PB5 IRQ_TYPE_LEVEL_LOW>; rst_gpio_number = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; }; }; &i2c5 { status = "okay"; ls_stk3332: light@47 { compatible = "ls_stk3332"; status = "disabled"; reg = <0x47>; type = ; irq_enable = <0>; als_threshold_high = <100>; als_threshold_low = <10>; als_ctrl_gain = <2>; /* 0:x1 1:x4 2:x16 3:x64 */ poll_delay_ms = <100>; }; ps_stk3332: proximity@47 { compatible = "ps_stk3332"; status = "disabled"; reg = <0x47>; type = ; //pinctrl-names = "default"; //pinctrl-0 = <&gpio3_c6>; //irq-gpio = <&gpio3 RK_PC6 IRQ_TYPE_LEVEL_LOW>; //irq_enable = <1>; ps_threshold_high = <0x200>; ps_threshold_low = <0x100>; ps_ctrl_gain = <3>; /* 0:x1 1:x2 2:x5 3:x8 */ ps_led_current = <4>; /* 0:3.125mA 1:6.25mA 2:12.5mA 3:25mA 4:50mA 5:100mA*/ poll_delay_ms = <100>; }; mpu6500_acc: mpu_acc@68 { compatible = "mpu6500_acc"; reg = <0x68>; irq-gpio = <&gpio3 RK_PB4 IRQ_TYPE_EDGE_RISING>; irq_enable = <0>; poll_delay_ms = <30>; type = ; layout = <5>; }; mpu6500_gyro: mpu_gyro@68 { compatible = "mpu6500_gyro"; reg = <0x68>; poll_delay_ms = <30>; type = ; layout = <5>; }; }; &i2c8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c8m2_xfer>; usbc0: fusb302@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&usbc0_int>; vbus-supply = <&vbus5v0_typec>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_role_sw: endpoint@0 { remote-endpoint = <&dwc3_0_role_switch>; }; }; }; usb_con: connector { compatible = "usb-c-connector"; label = "USB-C"; data-role = "dual"; power-role = "dual"; try-power-role = "sink"; op-sink-microwatt = <1000000>; sink-pdos = ; source-pdos = ; altmodes { #address-cells = <1>; #size-cells = <0>; altmode@0 { reg = <0>; svid = <0xff01>; vdo = <0xffffffff>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_orien_sw: endpoint { remote-endpoint = <&usbdp_phy0_orientation_switch>; }; }; port@1 { reg = <1>; dp_altmode_mux: endpoint { remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; }; }; }; }; }; hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; interrupt-parent = <&gpio0>; interrupts = ; wakeup-source; }; }; &pcie2x1l1 { reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie20>; status = "okay"; }; &pcie2x1l2 { reset-gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_HIGH>; rockchip,skip-scan-in-resume; status = "okay"; }; &pdm0 { status = "okay"; }; &pinctrl { headphone { hp_det: hp-det { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lcd { lcd_rst_gpio: lcd-rst-gpio { rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { sd_s0_pwr: sd-s0-pwr { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sensor { mpu6500_irq_gpio: mpu6500_irq_gpio { rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { usbc0_int: usbc0-int { rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; typec5v_pwren: typec5v-pwren { rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-bluetooth { uart8_gpios: uart8-gpios { rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_gpio: bt-gpio { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; }; wifi_poweren_gpio: wifi-poweren-gpio { rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &pwm3 { compatible = "rockchip,remotectl-pwm"; remote_pwm_id = <3>; handle_cpu_id = <1>; remote_support_psci = <0>; status = "okay"; ir_key1 { rockchip,usercode = <0x4040>; rockchip,key_table = <0xf2 KEY_REPLY>, <0xba KEY_BACK>, <0xf4 KEY_UP>, <0xf1 KEY_DOWN>, <0xef KEY_LEFT>, <0xee KEY_RIGHT>, <0xbd KEY_HOME>, <0xea KEY_VOLUMEUP>, <0xe3 KEY_VOLUMEDOWN>, <0xe2 KEY_SEARCH>, <0xb2 KEY_POWER>, <0xbc KEY_MUTE>, <0xec KEY_MENU>, <0xbf 0x190>, <0xe0 0x191>, <0xe1 0x192>, <0xe9 183>, <0xe6 248>, <0xe8 185>, <0xe7 186>, <0xf0 388>, <0xbe 0x175>; }; ir_key2 { rockchip,usercode = <0xff00>; rockchip,key_table = <0xf9 KEY_HOME>, <0xbf KEY_BACK>, <0xfb KEY_MENU>, <0xaa KEY_REPLY>, <0xb9 KEY_UP>, <0xe9 KEY_DOWN>, <0xb8 KEY_LEFT>, <0xea KEY_RIGHT>, <0xeb KEY_VOLUMEDOWN>, <0xef KEY_VOLUMEUP>, <0xf7 KEY_MUTE>, <0xe7 KEY_POWER>, <0xfc KEY_POWER>, <0xa9 KEY_VOLUMEDOWN>, <0xa8 KEY_PLAYPAUSE>, <0xe0 KEY_VOLUMEDOWN>, <0xa5 KEY_VOLUMEDOWN>, <0xab 183>, <0xb7 388>, <0xe8 388>, <0xf8 184>, <0xaf 185>, <0xed KEY_VOLUMEDOWN>, <0xee 186>, <0xb3 KEY_VOLUMEDOWN>, <0xf1 KEY_VOLUMEDOWN>, <0xf2 KEY_VOLUMEDOWN>, <0xf3 KEY_SEARCH>, <0xb4 KEY_VOLUMEDOWN>, <0xa4 KEY_SETUP>, <0xbe KEY_SEARCH>; }; ir_key3 { rockchip,usercode = <0x1dcc>; rockchip,key_table = <0xee KEY_REPLY>, <0xf0 KEY_BACK>, <0xf8 KEY_UP>, <0xbb KEY_DOWN>, <0xef KEY_LEFT>, <0xed KEY_RIGHT>, <0xfc KEY_HOME>, <0xf1 KEY_VOLUMEUP>, <0xfd KEY_VOLUMEDOWN>, <0xb7 KEY_SEARCH>, <0xff KEY_POWER>, <0xf3 KEY_MUTE>, <0xbf KEY_MENU>, <0xf9 0x191>, <0xf5 0x192>, <0xb3 388>, <0xbe KEY_1>, <0xba KEY_2>, <0xb2 KEY_3>, <0xbd KEY_4>, <0xf9 KEY_5>, <0xb1 KEY_6>, <0xfc KEY_7>, <0xf8 KEY_8>, <0xb0 KEY_9>, <0xb6 KEY_0>, <0xb5 KEY_BACKSPACE>; }; }; &pwm11 { pinctrl-0 = <&pwm11m1_pins>; status = "okay"; }; &pwm12 { pinctrl-0 = <&pwm12m1_pins>; status = "okay"; }; &route_edp0 { connect = <&vp2_out_edp0>; status = "okay"; }; &sdmmc { status = "okay"; vmmc-supply = <&vcc_3v3_sd_s0>; }; &spdif_tx1 { status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&spdif1m1_tx>; }; &spdif_tx1_dc { status = "okay"; }; &spdif_tx1_sound { status = "okay"; }; &spdif_tx2 { status = "okay"; }; &u2phy0_otg { rockchip,typec-vbus-det; }; &u2phy2_host { phy-supply = <&vcc5v0_host>; }; &u2phy3_host { phy-supply = <&vcc5v0_host>; }; &uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart8m1_xfer &uart8m1_ctsn>; }; &usbdp_phy0 { orientation-switch; svid = <0xff01>; sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; port { #address-cells = <1>; #size-cells = <0>; usbdp_phy0_orientation_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_orien_sw>; }; usbdp_phy0_dp_altmode_mux: endpoint@1 { reg = <1>; remote-endpoint = <&dp_altmode_mux>; }; }; }; &usbdrd_dwc3_0 { usb-role-switch; port { #address-cells = <1>; #size-cells = <0>; dwc3_0_role_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_role_sw>; }; }; }; &usbhost3_0 { status = "disabled"; }; &usbhost_dwc3_0 { status = "disabled"; }; /* vp0 & vp3 are not used on this board */ &vp0 { /delete-property/ rockchip,plane-mask; /delete-property/ rockchip,primary-plane; }; &vp1 { rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0 | 1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>; rockchip,primary-plane = ; }; &vp2 { rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2 | 1 << ROCKCHIP_VOP2_CLUSTER3 | 1 << ROCKCHIP_VOP2_ESMART3)>; rockchip,primary-plane = ; }; &vp3 { /delete-property/ rockchip,plane-mask; /delete-property/ rockchip,primary-plane; };