// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2021 Rockchip Electronics Co., Ltd. * */ #include "dt-bindings/usb/pd.h" #include "rk3588s.dtsi" #include "rk3588s-evb.dtsi" #include "rk3588s-rk806-dual.dtsi" / { combophy_avdd0v85: combophy-avdd0v85 { compatible = "regulator-fixed"; regulator-name = "combophy_avdd0v85"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; vin-supply = <&vdd_0v85_s0>; }; combophy_avdd1v8: combophy-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "combophy_avdd1v8"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&avcc_1v8_s0>; }; fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; pwms = <&pwm7 0 50000 0>; cooling-levels = <0 50 100 150 200 255>; rockchip,temp-trips = < 50000 1 55000 2 60000 3 65000 4 70000 5 >; }; vcc3v3_lcd_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; regulator-boot-on; enable-active-high; gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc_1v8_s0>; }; vcc3v3_pcie20: vcc3v3-pcie20 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie20"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; startup-delay-us = <5000>; vin-supply = <&vcc12v_dcin>; }; vbus5v0_typec: vbus5v0-typec { compatible = "regulator-fixed"; regulator-name = "vbus5v0_typec"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&typec5v_pwren>; }; }; &combphy0_ps { status = "okay"; }; &dp0 { status = "okay"; }; &dp0_in_vp2 { status = "okay"; }; /* * mipi_dcphy0 needs to be enabled * when dsi0 is enabled */ &dsi0 { status = "disabled"; }; &dsi0_in_vp2 { status = "disabled"; }; &dsi0_in_vp3 { status = "okay"; }; /* * mipi_dcphy1 needs to be enabled * when dsi1 is enabled */ &dsi1 { status = "disabled"; }; &dsi1_in_vp2 { status = "disabled"; }; &dsi1_in_vp3 { status = "disabled"; }; &i2c2 { status = "okay"; hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; interrupt-parent = <&gpio0>; interrupts = ; wakeup-source; }; }; &i2c4 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c4m3_xfer>; gt1x: gt1x@14 { compatible = "goodix,gt1x"; reg = <0x14>; pinctrl-names = "default"; pinctrl-0 = <&touch_gpio>; goodix,rst-gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; goodix,irq-gpio = <&gpio1 RK_PB5 IRQ_TYPE_LEVEL_LOW>; power-supply = <&vcc3v3_lcd_n>; }; }; &i2c8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c8m2_xfer>; usbc0: fusb302@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&usbc0_int>; vbus-supply = <&vbus5v0_typec>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_role_sw: endpoint@0 { remote-endpoint = <&dwc3_0_role_switch>; }; }; }; usb_con: connector { compatible = "usb-c-connector"; label = "USB-C"; data-role = "dual"; power-role = "dual"; try-power-role = "sink"; op-sink-microwatt = <1000000>; sink-pdos = ; source-pdos = ; altmodes { #address-cells = <1>; #size-cells = <0>; altmode@0 { reg = <0>; svid = <0xff01>; vdo = <0xffffffff>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_orien_sw: endpoint { remote-endpoint = <&usbdp_phy0_orientation_switch>; }; }; port@1 { reg = <1>; dp_altmode_mux: endpoint { remote-endpoint = <&usbdp_phy0_dp_altmode_mux>; }; }; }; }; }; }; &mipi_dcphy0 { status = "disabled"; }; &mipi_dcphy1 { status = "disabled"; }; &pcie2x1l2 { reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie20>; status = "okay"; }; &pinctrl { hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; touch { touch_gpio: touch-gpio { rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb-typec { usbc0_int: usbc0-int { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; }; typec5v_pwren: typec5v-pwren { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm11 { status = "okay"; }; &route_dsi0 { status = "okay"; connect = <&vp3_out_dsi0>; }; &route_dsi1 { status = "disabled"; connect = <&vp3_out_dsi1>; }; &sdmmc { status = "okay"; vmmc-supply = <&vcc_3v3_sd_s0>; }; &sata2 { status = "okay"; }; &u2phy0_otg { rockchip,typec-vbus-det; }; &u2phy2 { status = "disabled"; }; &u2phy3 { status = "disabled"; }; &u2phy2_host { status = "disabled"; }; &u2phy3_host { status = "disabled"; }; &usb_host0_ehci { status = "disabled"; }; &usb_host0_ohci { status = "disabled"; }; &usb_host1_ehci { status = "disabled"; }; &usb_host1_ohci { status = "disabled"; }; &usbdp_phy0 { orientation-switch; svid = <0xff01>; sbu1-dc-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>; sbu2-dc-gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>; port { #address-cells = <1>; #size-cells = <0>; usbdp_phy0_orientation_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_orien_sw>; }; usbdp_phy0_dp_altmode_mux: endpoint@1 { reg = <1>; remote-endpoint = <&dp_altmode_mux>; }; }; }; &usbdrd_dwc3_0 { usb-role-switch; port { #address-cells = <1>; #size-cells = <0>; dwc3_0_role_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_role_sw>; }; }; }; &usbhost3_0 { status = "disabled"; }; &usbhost_dwc3_0 { status = "disabled"; };