// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include <dt-bindings/display/media-bus-format.h>
#include "rk3576.dtsi"
#include "rk3576-test1.dtsi"
#include "rk3576-android.dtsi"

/ {
	model = "Rockchip RK3576 TEST1 V10 Board + RK EVB EXT HDMItoMIPI BT1120toHDMI RK628F V10";
	compatible = "rockchip,rk3576-test1-v10-rk628-bt1120-2-hdmi", "rockchip,rk3576";

	rk628_sound: rk628-sound {
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <128>;
		simple-audio-card,name = "rockchip,hdmi-rk628";
		status = "okay";

		simple-audio-card,cpu {
			sound-dai = <&sai1>;
		};
		simple-audio-card,codec {
			sound-dai = <&i2c3_rk628>;
		};
	};
};

&mipidcphy0 {
	status = "disabled";
};

&dsi {
	status = "disabled";
};

&dsi_in_vp1 {
	status = "disabled";
};

&route_dsi {
	status = "disabled";
};

&gmac0 {
	status = "disabled";
};

&gmac1 {
	status = "disabled";
};

&sai1 {
	status = "disabled";
};

&pcie1 {
	status = "disabled";
};

/*
 * rk628
 */

&i2c3 {
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c3m0_xfer>;
	status = "okay";

	i2c3_rk628: rk628@50 {
		compatible = "rockchip,rk628";
		reg = <0x50>;

		interrupt-parent = <&gpio4>;
		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
		enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
		status = "okay";

		#sound-dai-cells = <0>;

		rk628-bt1120-in;
		bt1120-yc-swap;
		// bt1120-uv-swap;

		rk628-hdmi-out;
		mode-sync-pol = <0>;

		port {
			rk628_in_rgb: endpoint {
				remote-endpoint = <&rgb_out_rk628>;
			};
		};
	};
};

&rgb {
	status = "okay";
	pinctrl-names = "default";
	/*
	 * <&bt1120_pins> for bt1120
	 * <&bt656_pins>  for bt656
	 */
	pinctrl-0 = <&bt1120_pins>;

	ports {
		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			rgb_out_rk628: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&rk628_in_rgb>;
			};
		};
	};
};

&rgb_in_vp2 {
	status = "okay";
};

&route_rgb {
	status = "okay";
	connect = <&vp2_out_rgb>;
};

&sai1 {
	status = "okay";
	pinctrl-0 = <&sai1m0_lrck &sai1m0_sclk &sai1m0_sdo1>;
	rockchip,sai-tx-route = <1 0 2 3>;
};