// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/mfd/rockchip-serdes.h>
#include "rk3568.dtsi"
#include "rk3568-evb.dtsi"

/ {
	model = "Rockchip RK3568M SERDES EVB LP4X V10 Board";
	compatible = "rockchip,rk3568m-serdes-evb-lp4x-v10", "rockchip,rk3568";

	vcc2v5_sys: vcc2v5-ddr {
		compatible = "regulator-fixed";
		regulator-name = "vcc2v5-sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_bu: vcc3v3-bu {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_bu";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc5v0_sys>;
	};
};

&combphy0_us {
	status = "okay";
};

&combphy2_psq {
	status = "okay";
};

&gt1x {
	status = "disabled";
};

&i2c0 {
	status = "okay";

	gs_mxc6655xa: gs_mxc6655xa@15 {
		status = "okay";
		compatible = "gs_mxc6655xa";
		pinctrl-names = "default";
		pinctrl-0 = <&mxc6655xa_irq_gpio>;
		reg = <0x15>;
		irq-gpio = <&gpio0 RK_PA4 IRQ_TYPE_LEVEL_LOW>;
		irq_enable = <0>;
		poll_delay_ms = <30>;
		type = <SENSOR_TYPE_ACCEL>;
		power-off-in-suspend = <1>;
		layout = <1>;
	};
};

&i2c5 {
	status = "disabled";
};

&pinctrl {
	mxc6655xa {
		mxc6655xa_irq_gpio: mxc6655xa_irq_gpio {
			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	serdes {
		rkx110_reset_gpio: rkx110-reset-gpio {
			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pmu_io_domains {
	vccio6-supply = <&vcc_3v3>;
};

&pwm7 {
	status = "disabled";
};

&rk809_codec {
	status = "disabled";
};

&sdmmc0 {
	status = "disabled";
};

&sdmmc2 {
	status = "disabled";
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
};

&wireless_wlan {
	status = "disabled";
};

&wireless_bluetooth {
	status = "disabled";
};

/* OTG0 */
&combphy0_us {
	rockchip,dis-u3otg0-port;
	/* OTG and SATA0 not use combphy0_us, then disabled */
	status = "disabled";
};

&i2c1 {
	status = "okay";
	clock-frequency = <100000>;

	rkx110_x120: rkx110-x120@55 {
		compatible = "rockchip,rkx110";
		reg = <0x55>;
		remote0-addr = <0x54>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";

		serdes_panel: serdes-panel {
			compatible = "rockchip,serdes-panel";
			reg = <0>;
			status = "okay";

			display_timings0: display-timings {
				native-mode = <&serdes_timing0>;
				serdes_timing0: timing0 {
					clock-frequency = <132000000>;
					hactive = <1080>;
					vactive = <1920>;
					hfront-porch = <15>;
					hsync-len = <2>;
					hback-porch = <30>;
					vfront-porch = <15>;
					vsync-len = <2>;
					vback-porch = <15>;
					hsync-active = <0>;
					vsync-active = <0>;
					de-active = <0>;
					pixelclk-active = <1>;
				};
			};
		};
	};
};

&u2phy0_otg {
	vbus-supply = <&vcc5v0_otg>;
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usbdrd_dwc3 {
	dr_mode = "otg";
	phys = <&u2phy0_otg>;
	phy-names = "usb2-phy";
	extcon = <&usb2phy0>;
	maximum-speed = "high-speed";
	snps,dis_u2_susphy_quirk;
	status = "okay";
};

&usbdrd30 {
	status = "okay";
};

/* HOST1 */
&combphy1_usq {
	status = "okay";
};

&u2phy0_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usbhost_dwc3 {
	status = "okay";
};

&usbhost30 {
	status = "okay";
};