/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/input/rk-input.h>
#include <dt-bindings/display/rockchip_vop.h>
#include <dt-bindings/display/drm_mipi_dsi.h>
#include <dt-bindings/sensor-dev.h>
#include "rk3568.dtsi"
#include "rk3568-linux.dtsi"

/ {

	model = "Mixtile Edge 2";
	compatible = "focalcrest,mixtile-edge2", "rockchip,rk3568";
	/delete-node/ chosen;

	leds: leds {
		compatible = "gpio-leds";
		work_led: work {
			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
			
	};

	keys: gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";

		button@0 {
			gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
			label = "GPIO Loader";
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	audiopwmout_diff: audiopwmout-diff {
		status = "disabled";
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,name = "rockchip,audiopwmout-diff";
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,bitclock-master = <&master>;
		simple-audio-card,frame-master = <&master>;
		simple-audio-card,cpu {
			sound-dai = <&i2s3_2ch>;
		};
		master: simple-audio-card,codec {
			sound-dai = <&dig_acodec>;
		};
	};


	hdmi_sound: hdmi-sound {
		status = "okay";
		compatible = "rockchip,hdmi";
		rockchip,mclk-fs = <128>;
		rockchip,card-name = "rockchip-hdmi-sound";
		rockchip,cpu = <&i2s0_8ch>;
		rockchip,codec = <&hdmi>;
	};


	pdmics: dummy-codec {
		status = "disabled";
		compatible = "rockchip,dummy-codec";
		#sound-dai-cells = <0>;
	};

	pdm_mic_array: pdm-mic-array {
		status = "disabled";
		compatible = "simple-audio-card";
		simple-audio-card,name = "rockchip,pdm-mic-array";
		simple-audio-card,cpu {
			sound-dai = <&pdm>;
		};
		simple-audio-card,codec {
			sound-dai = <&pdmics>;
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		rknpu_reserved: rknpu {
			compatible = "shared-dma-pool";
			inactive;
			reusable;
			size = <0x0 0x20000000>;
			alignment = <0x0 0x1000>;
		};
	};

	rk809_sound: rk809-sound {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,name = "rockchip,rk809-codec";
		simple-audio-card,mclk-fs = <256>;

		simple-audio-card,cpu {
			sound-dai = <&i2s1_8ch>;
		};
		simple-audio-card,codec {
			sound-dai = <&rk809_codec>;
		};
	};

	spdif-sound {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,name = "ROCKCHIP,SPDIF";
		simple-audio-card,cpu {
				sound-dai = <&spdif_8ch>;
		};
		simple-audio-card,codec {
				sound-dai = <&spdif_out>;
		};
	};

	spdif_out: spdif-out {
			status = "okay";
			compatible = "linux,spdif-dit";
			#sound-dai-cells = <0>;
	};

	vad_sound: vad-sound {
		status = "disabled";
		compatible = "rockchip,multicodecs-card";
		rockchip,card-name = "rockchip,rk3568-vad";
		rockchip,cpu = <&i2s1_8ch>;
		rockchip,codec = <&rk809_codec>, <&vad>;
	};

	dc_12v: dc-12v {
		compatible = "regulator-fixed";
		regulator-name = "dc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc2v5_sys: vcc2v5-ddr {
		compatible = "regulator-fixed";
		regulator-name = "vcc2v5-sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <2500000>;
		regulator-max-microvolt = <2500000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_sys: vcc3v3-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_sys: vcc5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_usb: vcc5v0-usb {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_usb";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		gpio = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_host: vcc5v0-host {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_host";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vcc5v0_usb>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc5v0_host_en>;
	};

	pcie30_avdd0v9: pcie30-avdd0v9 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd0v9";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <900000>;
		regulator-max-microvolt = <900000>;
		vin-supply = <&vcc3v3_sys>;
	};

	pcie30_avdd1v8: pcie30-avdd1v8 {
		compatible = "regulator-fixed";
		regulator-name = "pcie30_avdd1v8";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&vcc3v3_sys>;
	};

	vcc3v3_pcie: vcc3v3-pcie {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		regulator-always-on;
		regulator-boot-on;
		gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
		vin-supply = <&dc_12v>;
	};

	vcc3v3_m2: vcc3v3-m2 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_m2";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		regulator-always-on;
		regulator-boot-on;
		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;

	};

	vcc1v8_m2: vcc1v8-m2 {
		compatible = "regulator-fixed";
		regulator-name = "vcc1v8_m2";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		regulator-boot-on;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc1v8_m2_pin>;
		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_LOW>;

	};

	vcc3v3_minipcie: vcc3v3-minipcie {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_minipcie";
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
		vin-supply = <&vcc5v0_sys>;
	};

	sdio_pwrseq: sdio-pwrseq {
		compatible = "mmc-pwrseq-simple";
		clocks = <&rk809 1>;
		clock-names = "ext_clock";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_enable_h>;

		/*
		 * On the module itself this is one of these (depending
		 * on the actual card populated):
		 * - SDIO_RESET_L_WL_REG_ON
		 * - PDN (power down when low)
		 */
		post-power-on-delay-ms = <200>;
		reset-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
	};

	wireless_wlan: wireless-wlan {
		compatible = "wlan-platdata";
		clocks = <&rk809 1>;
		clock-names = "clk_wifi";
		rockchip,grf = <&grf>;
		wifi_chip_type = "ap6275s";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_host_wake_irq>;
		WIFI,host_wake_irq = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	wireless_bluetooth: wireless-bluetooth {
		compatible = "bluetooth-platdata";
		clocks = <&rk809 1>;
		clock-names = "ext_clock";
		//wifi-bt-power-toggle;
		uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default", "rts_gpio";
		pinctrl-0 = <&uart8m0_rtsn>;
		pinctrl-1 = <&uart8_gpios>;
		BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
		BT,wake_gpio     = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
		BT,wake_host_irq = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	test-power {
		status = "okay";
	};

};

&bus_npu {
	bus-supply = <&vdd_logic>;
	pvtm-supply = <&vdd_cpu>;
	status = "okay";
};

&combphy0_us {
	status = "okay";
};

&combphy1_usq {
	status = "okay";
};

&combphy2_psq {
	status = "okay";
};

&tsadc {
	rockchip,hw-tshut-mode = <1>;
	rockchip,hw-tshut-polarity = <0>;
	status = "okay";
};

&gmac1 {
	phy-mode = "rgmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	/* Reset time is 20ms, 100ms for rtl8211f */
	snps,reset-delays-us = <0 20000 100000>;

	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
	assigned-clock-rates = <0>, <125000000>;

	pinctrl-names = "default";
	pinctrl-0 = <&gmac1m1_miim
		     &gmac1m1_tx_bus2
		     &gmac1m1_rx_bus2
		     &gmac1m1_rgmii_clk
		     &gmac1m1_rgmii_bus>;

	tx_delay = <0x4f>;
	rx_delay = <0x26>;

	phy-handle = <&rgmii_phy1>;
	status = "okay";
};

&mdio1 {
	rgmii_phy1: phy@0 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x0>;
	};
};

&pcie30phy {
	status = "okay";
};

&pcie3x2 {
	rockchip,bifurcation;
	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie>;
	status = "okay";
};

&can1 {
	assigned-clocks = <&cru CLK_CAN1>;
	assigned-clock-rates = <150000000>;
	pinctrl-names = "default";
	pinctrl-0 = <&can1m1_pins>;
	status = "okay";
};

&uart3 {
	status = "okay";
	pinctrl-0 = <&uart3m1_xfer>;
};

&uart4 {
	status = "okay";
	pinctrl-0 = <&uart4m1_xfer>;
};

&uart5 {
	status = "okay";
	pinctrl-0 = <&uart5m1_xfer>;
};

&uart8 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};

&sdmmc2 {
	max-frequency = <150000000>;
	supports-sdio;
	bus-width = <4>;
	disable-wp;
	cap-sd-highspeed;
	cap-sdio-irq;
	keep-power-in-suspend;
	mmc-pwrseq = <&sdio_pwrseq>;
	non-removable;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
	sd-uhs-sdr104;
	status = "okay";
};

&cpu0 {
	cpu-supply = <&vdd_cpu>;
};

&dfi {
	status = "okay";
};

&dmc {
	center-supply = <&vdd_logic>;
	status = "okay";
};

&pdm {
	pinctrl-0 = <&pdmm0_clk
			     &pdmm0_clk1
			     &pdmm0_sdi1
			     &pdmm0_sdi2
			     &pdmm0_sdi3>;
	status = "okay";
};

&i2c3 {
	status = "okay";

	hym8563: hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;

		pinctrl-names = "default";
		pinctrl-0 = <&hym8563_int>;

		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
		status = "okay";
	};
};

&gpu {
	mali-supply = <&vdd_gpu>;
	status = "okay";
};

&hdmi {
	status = "okay";
	rockchip,phy-table =
		<92812500  0x8009 0x0000 0x0270>,
		<165000000 0x800b 0x0000 0x026d>,
		<185625000 0x800b 0x0000 0x01ed>,
		<297000000 0x800b 0x0000 0x01ad>,
		<594000000 0x8029 0x0000 0x0088>,
		<000000000 0x0000 0x0000 0x0000>;
};

&hdmi_in_vp0 {
	status = "okay";
};

&hdmi_in_vp1 {
	status = "disabled";
};

&i2c0 {
	status = "okay";

	vdd_cpu: tcs4525@1c {
		compatible = "tcs,tcs452x";
		reg = <0x1c>;
		vin-supply = <&vcc5v0_sys>;
		regulator-compatible = "fan53555-reg";
		regulator-name = "vdd_cpu";
		regulator-min-microvolt = <712500>;
		regulator-max-microvolt = <1390000>;
		regulator-init-microvolt = <900000>;
		regulator-ramp-delay = <2300>;
		fcs,suspend-voltage-selector = <1>;
		regulator-boot-on;
		regulator-always-on;
		regulator-state-mem {
			regulator-off-in-suspend;
		};
	};

	rk809: pmic@20 {
		compatible = "rockchip,rk809";
		reg = <0x20>;
		interrupt-parent = <&gpio0>;
		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

		pinctrl-names = "default", "pmic-sleep",
				"pmic-power-off", "pmic-reset";
		pinctrl-0 = <&pmic_int>;
		pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
		pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
		pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;

		rockchip,system-power-controller;
		wakeup-source;
		#clock-cells = <1>;
		clock-output-names = "rk808-clkout1", "rk808-clkout2";
		//fb-inner-reg-idxs = <2>;
		/* 1: rst regs (default in codes), 0: rst the pmic */
		pmic-reset-func = <0>;
		/* not save the PMIC_POWER_EN register in uboot */
		not-save-power-en = <1>;

		vcc1-supply = <&vcc3v3_sys>;
		vcc2-supply = <&vcc3v3_sys>;
		vcc3-supply = <&vcc3v3_sys>;
		vcc4-supply = <&vcc3v3_sys>;
		vcc5-supply = <&vcc3v3_sys>;
		vcc6-supply = <&vcc3v3_sys>;
		vcc7-supply = <&vcc3v3_sys>;
		vcc8-supply = <&vcc3v3_sys>;
		vcc9-supply = <&vcc3v3_sys>;

		pwrkey {
			status = "okay";
		};

		pinctrl_rk8xx: pinctrl_rk8xx {
			gpio-controller;
			#gpio-cells = <2>;

			rk817_slppin_null: rk817_slppin_null {
				pins = "gpio_slp";
				function = "pin_fun0";
			};

			rk817_slppin_slp: rk817_slppin_slp {
				pins = "gpio_slp";
				function = "pin_fun1";
			};

			rk817_slppin_pwrdn: rk817_slppin_pwrdn {
				pins = "gpio_slp";
				function = "pin_fun2";
			};

			rk817_slppin_rst: rk817_slppin_rst {
				pins = "gpio_slp";
				function = "pin_fun3";
			};
		};

		regulators {
			vdd_logic: DCDC_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-init-microvolt = <900000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_logic";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdd_gpu: DCDC_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-init-microvolt = <900000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_gpu";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_ddr: DCDC_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-initial-mode = <0x2>;
				regulator-name = "vcc_ddr";
				regulator-state-mem {
					regulator-on-in-suspend;
				};
			};

			vdd_npu: DCDC_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1350000>;
				regulator-init-microvolt = <900000>;
				regulator-ramp-delay = <6001>;
				regulator-initial-mode = <0x2>;
				regulator-name = "vdd_npu";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_image: LDO_REG1 {
				regulator-boot-on;
				regulator-always-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_image";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda_0v9: LDO_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda_0v9";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vdda0v9_pmu: LDO_REG3 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-name = "vdda0v9_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <900000>;
				};
			};

			vccio_acodec: LDO_REG4 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_acodec";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vccio_sd: LDO_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vccio_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_pmu: LDO_REG6 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
				regulator-name = "vcc3v3_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <3300000>;
				};
			};

			vcca_1v8: LDO_REG7 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca_1v8";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcca1v8_pmu: LDO_REG8 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_pmu";
				regulator-state-mem {
					regulator-on-in-suspend;
					regulator-suspend-microvolt = <1800000>;
				};
			};

			vcca1v8_image: LDO_REG9 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcca1v8_image";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_1v8: DCDC_REG5 {
				regulator-always-on;
				regulator-boot-on;
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
				regulator-name = "vcc_1v8";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc_3v3: SWITCH_REG1 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc_3v3";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};

			vcc3v3_sd: SWITCH_REG2 {
				regulator-always-on;
				regulator-boot-on;
				regulator-name = "vcc3v3_sd";
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};

		rk809_codec: codec {
			#sound-dai-cells = <0>;
			compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
			clocks = <&cru I2S1_MCLKOUT>;
			clock-names = "mclk";
			assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
			assigned-clock-rates = <12288000>;
			assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2s1m0_mclk>;
			hp-volume = <20>;
			spk-volume = <3>;
			mic-in-differential;
			status = "okay";
		};
	};
};

&i2s0_8ch {
	status = "okay";
};

&i2s1_8ch {
	status = "okay";
	rockchip,clk-trcm = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&i2s1m0_sclktx
		     &i2s1m0_lrcktx
		     &i2s1m0_sdi0
		     &i2s1m0_sdo0>;
};

&iep {
	status = "okay";
};

&iep_mmu {
	status = "okay";
};

&jpegd {
	status = "okay";
};

&jpegd_mmu {
	status = "okay";
};

&mpp_srv {
	status = "okay";
};


 /*
  * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7].
  * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured;
  * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages
  *    must be consistent with the software configuration correspondingly
  *	a/ When the hardware IO level is connected to 1.8V, the software voltage configuration
  *	   should also be configured to 1.8V accordingly;
  *	b/ When the hardware IO level is connected to 3.3V, the software voltage configuration
  *	   should also be configured to 3.3V accordingly;
  * 3/ VCCIO2 voltage control selection (0xFDC20140)
  *	BIT[0]: 0x0: from GPIO_0A7 (default)
  *	BIT[0]: 0x1: from GRF
  *    Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7:
  *	L:VCCIO2 must supply 3.3V
  *	H:VCCIO2 must supply 1.8V
  */
&pmu_io_domains {
	status = "okay";
	pmuio2-supply = <&vcc3v3_pmu>;
	vccio1-supply = <&vccio_acodec>;
	vccio3-supply = <&vccio_sd>;
	vccio4-supply = <&vcc_1v8>;
	vccio5-supply = <&vcc_3v3>;
	vccio6-supply = <&vcc_1v8>;
	vccio7-supply = <&vcc_3v3>;
};

&pwm7 {
	status = "okay";

	compatible = "rockchip,remotectl-pwm";
	remote_pwm_id = <3>;
	handle_cpu_id = <1>;
	remote_support_psci = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pwm7_pins>;

	ir_key1 {
		rockchip,usercode = <0x4040>;
		rockchip,key_table =
			<0xf2	KEY_REPLY>,
			<0xba	KEY_BACK>,
			<0xf4	KEY_UP>,
			<0xf1	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xee	KEY_RIGHT>,
			<0xbd	KEY_HOME>,
			<0xea	KEY_VOLUMEUP>,
			<0xe3	KEY_VOLUMEDOWN>,
			<0xe2	KEY_SEARCH>,
			<0xb2	KEY_POWER>,
			<0xbc	KEY_MUTE>,
			<0xec	KEY_MENU>,
			<0xbf	0x190>,
			<0xe0	0x191>,
			<0xe1	0x192>,
			<0xe9	183>,
			<0xe6	248>,
			<0xe8	185>,
			<0xe7	186>,
			<0xf0	388>,
			<0xbe	0x175>;
	};

	ir_key2 {
		rockchip,usercode = <0xff00>;
		rockchip,key_table =
			<0xf9	KEY_HOME>,
			<0xbf	KEY_BACK>,
			<0xfb	KEY_MENU>,
			<0xaa	KEY_REPLY>,
			<0xb9	KEY_UP>,
			<0xe9	KEY_DOWN>,
			<0xb8	KEY_LEFT>,
			<0xea	KEY_RIGHT>,
			<0xeb	KEY_VOLUMEDOWN>,
			<0xef	KEY_VOLUMEUP>,
			<0xf7	KEY_MUTE>,
			<0xe7	KEY_POWER>,
			<0xfc	KEY_POWER>,
			<0xa9	KEY_VOLUMEDOWN>,
			<0xa8	KEY_VOLUMEDOWN>,
			<0xe0	KEY_VOLUMEDOWN>,
			<0xa5	KEY_VOLUMEDOWN>,
			<0xab	183>,
			<0xb7	388>,
			<0xe8	388>,
			<0xf8	184>,
			<0xaf	185>,
			<0xed	KEY_VOLUMEDOWN>,
			<0xee	186>,
			<0xb3	KEY_VOLUMEDOWN>,
			<0xf1	KEY_VOLUMEDOWN>,
			<0xf2	KEY_VOLUMEDOWN>,
			<0xf3	KEY_SEARCH>,
			<0xb4	KEY_VOLUMEDOWN>,
			<0xbe	KEY_SEARCH>;
	};

	ir_key3 {
		rockchip,usercode = <0x1dcc>;
		rockchip,key_table =
			<0xee	KEY_REPLY>,
			<0xf0	KEY_BACK>,
			<0xf8	KEY_UP>,
			<0xbb	KEY_DOWN>,
			<0xef	KEY_LEFT>,
			<0xed	KEY_RIGHT>,
			<0xfc	KEY_HOME>,
			<0xf1	KEY_VOLUMEUP>,
			<0xfd	KEY_VOLUMEDOWN>,
			<0xb7	KEY_SEARCH>,
			<0xff	KEY_POWER>,
			<0xf3	KEY_MUTE>,
			<0xbf	KEY_MENU>,
			<0xf9	0x191>,
			<0xf5	0x192>,
			<0xb3	388>,
			<0xbe	KEY_1>,
			<0xba	KEY_2>,
			<0xb2	KEY_3>,
			<0xbd	KEY_4>,
			<0xf9	KEY_5>,
			<0xb1	KEY_6>,
			<0xfc	KEY_7>,
			<0xf8	KEY_8>,
			<0xb0	KEY_9>,
			<0xb6	KEY_0>,
			<0xb5	KEY_BACKSPACE>;
	};
};

&rk_rga {
	status = "okay";
};

&rkvdec {
	status = "okay";
};

&rkvdec_mmu {
	status = "okay";
};

&rkvenc {
	venc-supply = <&vdd_logic>;
	status = "okay";
};

&rkvenc_mmu {
	status = "okay";
};

&rknpu {
	rknpu-supply = <&vdd_npu>;
	status = "okay";
};

&rknpu_mmu {
	status = "okay";
};

&route_hdmi {
	status = "okay";
	connect = <&vp0_out_hdmi>;
};

&saradc {
	status = "okay";
	vref-supply = <&vcca_1v8>;
};

&sdhci {
	bus-width = <8>;
	supports-emmc;
	non-removable;
	max-frequency = <200000000>;
	status = "okay";
};

&sdmmc0 {
	max-frequency = <150000000>;
	supports-sd;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc3v3_sd>;
	vqmmc-supply = <&vccio_sd>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
	status = "okay";
};

&sfc {
	status = "disabled";
};

&spdif_8ch {
	status = "okay";
};

&tsadc {
	status = "okay";
};

&u2phy0_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&u2phy0_otg {
	status = "okay";
};

&u2phy1_host {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&u2phy1_otg {
	phy-supply = <&vcc5v0_host>;
	status = "okay";
};

&usb2phy0 {
	status = "okay";
};

&usb2phy1 {
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&usb_host1_ehci {
	status = "okay";
};

&usb_host1_ohci {
	status = "okay";
};

&usbdrd_dwc3 {
	dr_mode = "otg";
	extcon = <&usb2phy0>;
	status = "okay";
};

&usbdrd30 {
	status = "okay";
};

&usbhost_dwc3 {
	status = "okay";
};

&usbhost30 {
	status = "okay";
};

&vad {
	rockchip,audio-src = <&i2s1_8ch>;
	rockchip,buffer-time-ms = <128>;
	rockchip,det-channel = <0>;
	rockchip,mode = <0>;
};

&vdpu {
	status = "okay";
};

&vdpu_mmu {
	status = "okay";
};

&vepu {
	status = "okay";
};

&vepu_mmu {
	status = "okay";
};

&vop {
	status = "okay";
	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
};

&vop_mmu {
	status = "okay";
};

&pinctrl {

	pmic {
		pmic_int: pmic_int {
			rockchip,pins =
				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		soc_slppin_gpio: soc_slppin_gpio {
			rockchip,pins =
				<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
		};

		soc_slppin_slp: soc_slppin_slp {
			rockchip,pins =
				<0 RK_PA2 1 &pcfg_pull_up>;
		};

		soc_slppin_rst: soc_slppin_rst {
			rockchip,pins =
				<0 RK_PA2 2 &pcfg_pull_none>;
		};
	};

	sdio-pwrseq {
		wifi_enable_h: wifi-enable-h {
			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	hym8563 {
		hym8563_int: hym8563-int {
			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	bt {
		 bt_enable: bt-enable {
			 rockchip,pins = <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		 };

		 bt_host_wake: bt-host-wake {
			 rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>;
		 };

		 bt_wake: bt-wake {
			 rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
		 };
	 };

	usb {
		vcc5v0_host_en: vcc5v0-host-en {
			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-wlan {
		wifi_host_wake_irq: wifi-host-wake-irq {
			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
		};
	};

	wireless-bluetooth {
		uart8_gpios: uart8-gpios {
			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	vcc1v8-m2-pin {
		vcc1v8_m2_pin: vcc1v8-m2-pin {
			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};