// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Rockchip Electronics Co., Ltd. */ /dts-v1/; #include #include #include #include #include #include #include #include #include #include "rk3568.dtsi" / { model = "ArmSom Sige3"; compatible = "armsom,sige3", "rockchip,rk3568"; aliases { mmc0 = &sdhci; mmc1 = &sdmmc0; mmc2 = &sdmmc1; }; cspmu: cspmu@fd90c000 { compatible = "rockchip,cspmu"; reg = <0x0 0xfd90c000 0x0 0x1000>, <0x0 0xfd90d000 0x0 0x1000>, <0x0 0xfd90e000 0x0 0x1000>, <0x0 0xfd90f000 0x0 0x1000>; }; dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; debug: debug@fd904000 { compatible = "rockchip,debug"; reg = <0x0 0xfd904000 0x0 0x1000>, <0x0 0xfd905000 0x0 0x1000>, <0x0 0xfd906000 0x0 0x1000>, <0x0 0xfd907000 0x0 0x1000>; }; fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; pwms = <&pwm3 0 50000 0>; cooling-levels = <0 50 100 150 200 255>; rockchip,temp-trips = < 50000 1 55000 2 60000 3 65000 4 70000 5 >; }; fiq-debugger { compatible = "rockchip,fiq-debugger"; rockchip,serial-id = <2>; rockchip,wake-irq = <0>; /* If enable uart uses irq instead of fiq */ rockchip,irq-mode-enable = <1>; rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; }; hdmi_sound: hdmi-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <128>; simple-audio-card,name = "rockchip,hdmi"; simple-audio-card,cpu { sound-dai = <&i2s0_8ch>; }; simple-audio-card,codec { sound-dai = <&hdmi>; }; }; leds: leds { compatible = "gpio-leds"; work_led: work { label = "red"; gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; default-state = "off"; }; active_led: active { label = "green"; gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-off"; default-state = "on"; }; }; pcie30_avdd0v9: pcie30-avdd0v9 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd0v9"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; vin-supply = <&vcc3v3_sys>; }; pcie30_avdd1v8: pcie30-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; }; rk809_sound: rk809-sound { compatible = "rockchip,multicodecs-card"; rockchip,card-name = "rockchip-rk809"; hp-det-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; rockchip,format = "i2s"; rockchip,mclk-fs = <256>; rockchip,cpu = <&i2s1_8ch>; rockchip,codec = <&rk809_codec>; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h &clk32k_out1>; post-power-on-delay-ms = <200>; reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; }; spdif-sound { compatible = "simple-audio-card"; simple-audio-card,name = "ROCKCHIP,SPDIF"; simple-audio-card,mclk-fs = <128>; simple-audio-card,cpu { sound-dai = <&spdif_8ch>; }; simple-audio-card,codec { sound-dai = <&spdif_out>; }; }; spdif_out: spdif-out { compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; }; vcc3v3_pcie0: vcc3v3-pcie0 { compatible = "regulator-fixed"; regulator-name = "vcc3v3_pcie0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; startup-delay-us = <5000>; vin-supply = <&vcc3v3_sys>; }; vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc5v0_usb: vcc5v0-usb { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; }; vcc5v0_host2: vcc5v0-host2-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host2"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host2_en>; }; vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_otg"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_usb>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_otg_en>; }; wireless_wlan: wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "ap6275s"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; }; }; &bus_npu { bus-supply = <&vdd_logic>; pvtm-supply = <&vdd_cpu>; status = "okay"; }; &combphy0_us { status = "okay"; }; &combphy1_usq { status = "okay"; }; &combphy2_psq { status = "okay"; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &dfi { status = "okay"; }; &dmc { center-supply = <&vdd_logic>; status = "okay"; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "output"; snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; assigned-clock-rates = <0>, <125000000>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus>; tx_delay = <0x48>;//3c rx_delay = <0x2a>;//2f phy-handle = <&rgmii_phy1>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { status = "okay"; rockchip,phy-table = <92812500 0x8009 0x0000 0x0270>, <165000000 0x800b 0x0000 0x026d>, <185625000 0x800b 0x0000 0x01ed>, <297000000 0x800b 0x0000 0x01ad>, <594000000 0x8029 0x0000 0x0088>, <000000000 0x0000 0x0000 0x0000>; }; &hdmi_in_vp0 { status = "okay"; }; &hdmi_in_vp1 { status = "disabled"; }; &i2c0 { status = "okay"; hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; interrupt-parent = <&gpio0>; interrupts = ; wakeup-source; }; usbc1: fusb302@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio0>; interrupts = ; int-n-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&usbc1_int>; vbus-supply = <&vcc3v3_sys>; status = "okay"; usb_con: connector { compatible = "usb-c-connector"; label = "USB-C"; data-role = "dual"; power-role = "dual"; try-power-role = "sink"; op-sink-microwatt = <1000000>; sink-pdos = ; source-pdos = ; altmodes { #address-cells = <1>; #size-cells = <0>; altmode@0 { reg = <0>; svid = <0xff01>; vdo = <0xffffffff>; }; }; }; }; vdd_cpu: rk8600@40 { compatible = "rockchip,rk8600"; reg = <0x40>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "rk860x-reg"; regulator-name = "vdd_cpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1390000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <2300>; rockchip,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "pmic-sleep", "pmic-power-off", "pmic-reset"; pinctrl-0 = <&pmic_int>; pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; //fb-inner-reg-idxs = <2>; /* 1: rst regs (default in codes), 0: rst the pmic */ pmic-reset-func = <0>; /* not save the PMIC_POWER_EN register in uboot */ not-save-power-en = <1>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; pwrkey { status = "okay"; }; pinctrl_rk8xx: pinctrl_rk8xx { gpio-controller; #gpio-cells = <2>; rk817_slppin_null: rk817_slppin_null { pins = "gpio_slp"; function = "pin_fun0"; }; rk817_slppin_slp: rk817_slppin_slp { pins = "gpio_slp"; function = "pin_fun1"; }; rk817_slppin_pwrdn: rk817_slppin_pwrdn { pins = "gpio_slp"; function = "pin_fun2"; }; rk817_slppin_rst: rk817_slppin_rst { pins = "gpio_slp"; function = "pin_fun3"; }; }; regulators { vdd_logic: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_logic"; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_gpu"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_npu"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-boot-on; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda_0v9"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "vccio_acodec"; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_3v3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_sd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc3v3_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; }; rk809_codec: codec { #sound-dai-cells = <1>; compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; clocks = <&cru I2S1_MCLKOUT>; clock-names = "mclk"; assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; assigned-clock-rates = <12288000>; assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_mclk>; hp-volume = <20>; spk-volume = <3>; mic-in-differential; status = "okay"; }; }; }; &i2s0_8ch { status = "okay"; }; &i2s1_8ch { status = "okay"; rockchip,clk-trcm = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; }; &iep { status = "okay"; }; &iep_mmu { status = "okay"; }; &jpegd { status = "okay"; }; &jpegd_mmu { status = "okay"; }; &mdio1 { rgmii_phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; }; &mpp_srv { status = "okay"; }; &nandc0 { #address-cells = <1>; #size-cells = <0>; status = "okay"; nand@0 { reg = <0>; nand-bus-width = <8>; nand-ecc-mode = "hw"; nand-ecc-strength = <16>; nand-ecc-step-size = <1024>; }; }; &pcie2x1 { reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &pcie30phy { status = "okay"; }; &pcie3x2 { reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pcie0>; status = "okay"; }; &pinctrl { bt { bt_enable: bt-enable { rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake: bt-host-wake { rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_wake: bt-wake { rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; headphone { hp_det: hp-det { rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; }; }; pmic { pmic_int: pmic_int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; soc_slppin_gpio: soc_slppin_gpio { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; }; soc_slppin_slp: soc_slppin_slp { rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; }; }; usb { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_host2_en: vcc5v0-host2-en { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_otg_en: vcc5v0-otg-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; usbc1_int: usbc1-int { rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pcie { vcc3v3_pcie_en: vcc3v3-pcie-en { rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; hym8563 { hym8563_int: hym8563-int { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; }; /* * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages * must be consistent with the software configuration correspondingly * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration * should also be configured to 1.8V accordingly; * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration * should also be configured to 3.3V accordingly; * 3/ VCCIO2 voltage control selection (0xFDC20140) * BIT[0]: 0x0: from GPIO_0A7 (default) * BIT[0]: 0x1: from GRF * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: * L:VCCIO2 must supply 3.3V * H:VCCIO2 must supply 1.8V */ &pmu_io_domains { status = "okay"; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; }; &pwm3 { status = "okay"; }; &reserved_memory { ramoops: ramoops@110000 { compatible = "ramoops"; reg = <0x0 0x110000 0x0 0xf0000>; record-size = <0x20000>; console-size = <0x80000>; ftrace-size = <0x00000>; pmsg-size = <0x50000>; }; }; &rk_rga { status = "okay"; }; &rkvdec { status = "okay"; }; &rkvdec_mmu { status = "okay"; }; &rkvenc { venc-supply = <&vdd_logic>; status = "okay"; }; &rkvenc_mmu { status = "okay"; }; &rknpu { rknpu-supply = <&vdd_npu>; status = "okay"; }; &rknpu_mmu { status = "okay"; }; &rng { status = "okay"; }; &rockchip_suspend { status = "okay"; }; &route_hdmi { status = "okay"; connect = <&vp0_out_hdmi>; }; &saradc { status = "okay"; vref-supply = <&vcca_1v8>; }; &sdhci { bus-width = <8>; no-sdio; no-sd; non-removable; max-frequency = <200000000>; full-pwr-cycle-in-suspend; status = "okay"; }; &sdmmc0 { max-frequency = <150000000>; supports-sd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; sd-uhs-sdr104; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; status = "okay"; }; &sdmmc1 { max-frequency = <200000000>; no-sd; no-mmc; supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; sd-uhs-sdr104; status = "okay"; }; &sfc { status = "okay"; flash@0 { compatible = "spi-nand"; reg = <0>; spi-max-frequency = <75000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; }; }; &spdif_8ch { status = "okay"; }; &tsadc { status = "okay"; }; &u2phy0_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy0_otg { vbus-supply = <&vcc5v0_otg>; status = "okay"; }; &u2phy1_host { phy-supply = <&vcc5v0_host2>; status = "okay"; }; &u2phy1_otg { phy-supply = <&vcc5v0_host2>; status = "okay"; }; &uart1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; uart-has-rtscts; bluetooth { compatible = "brcm,bcm43438-bt"; device-wakeup-gpios = <&gpio2 RK_PC1 0>; host-wakeup-gpios = <&gpio2 RK_PC0 0>; shutdown-gpios = <&gpio2 RK_PB7 0>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; vbat-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; }; }; &usb2phy0 { status = "okay"; }; &usb2phy1 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd_dwc3 { dr_mode = "otg"; extcon = <&usb2phy0>; status = "okay"; }; &usbdrd30 { status = "okay"; }; &usbhost_dwc3 { status = "okay"; }; &usbhost30 { status = "okay"; }; &vdpu { status = "okay"; }; &vdpu_mmu { status = "okay"; }; &vepu { status = "okay"; }; &vepu_mmu { status = "okay"; }; &vop { status = "okay"; disable-win-move; assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>, <&cru DCLK_VOP2>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>, <&cru PLL_GPLL>; }; &vop_mmu { status = "okay"; }; /* watchdog */ &wdt { status = "okay"; };