// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2022 Rockchip Electronics Co., Ltd. * */ /dts-v1/; #include #include #include #include #include "rk3528.dtsi" / { model = "ArmSom Sige1"; compatible = "armsom,sige1", "rockchip,rk3528"; aliases { ethernet0 = &gmac1; mmc0 = &sdmmc; mmc1 = &sdhci; mmc2 = &sdio0; }; acodec_sound: acodec-sound { status = "okay"; compatible = "simple-audio-card"; simple-audio-card,name = "rk3528-acodec"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; simple-audio-card,cpu { sound-dai = <&sai2>; }; simple-audio-card,codec { sound-dai = <&acodec>; }; }; fiq-debugger { compatible = "rockchip,fiq-debugger"; rockchip,serial-id = <0>; rockchip,wake-irq = <0>; /* If enable uart uses irq instead of fiq */ rockchip,irq-mode-enable = <1>; rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */ interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&uart0m0_xfer>; status = "okay"; }; firmware { optee { compatible = "linaro,optee-tz"; method = "smc"; }; }; dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; /omit-if-no-ref/ vccio_sd: vccio-sd { compatible = "regulator-gpio"; regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; vin-supply = <&vcc5v0_sys>; states = <1800000 0x0 3300000 0x1>; }; /omit-if-no-ref/ vcc_sd: vcc-sd { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; vdd_logic: vdd-logic { compatible = "pwm-regulator"; pwms = <&pwm2 0 5000 1>; regulator-name = "vdd_logic"; regulator-min-microvolt = <705000>; regulator-max-microvolt = <1006000>; regulator-init-microvolt = <900000>; regulator-always-on; regulator-boot-on; regulator-settling-time-up-us = <250>; pwm-supply = <&vcc5v0_sys>; status = "okay"; }; vdd_cpu: vdd-cpu { compatible = "pwm-regulator"; pwms = <&pwm3 0 5000 1>; regulator-name = "vdd_cpu"; regulator-min-microvolt = <746000>; regulator-max-microvolt = <1201000>; regulator-init-microvolt = <953000>; regulator-always-on; regulator-boot-on; regulator-settling-time-up-us = <250>; pwm-supply = <&vcc5v0_sys>; status = "okay"; }; vdd_0v9_s3: vdd-0v9-s3 { compatible = "regulator-fixed"; regulator-name = "vdd_0v9_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; vin-supply = <&vcc5v0_sys>; }; vdd_1v8_s3: vdd-1v8-s3 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc5v0_sys>; }; vcc_3v3_s3: vcc-3v3-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_3v3_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; vcc_ddr_s3: vcc-ddr-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_ddr_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; vin-supply = <&vcc5v0_sys>; }; hdmi_sound: hdmi-sound { compatible = "rockchip,hdmi"; rockchip,mclk-fs = <128>; rockchip,card-name = "rockchip,hdmi"; rockchip,cpu = <&sai3>; rockchip,codec = <&hdmi>; rockchip,jack-det; }; pdmics: dummy-codec { status = "disabled"; compatible = "rockchip,dummy-codec"; #sound-dai-cells = <0>; }; pdm_mic_array: pdm-mic-array { status = "disabled"; compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,pdm-mic-array"; simple-audio-card,cpu { sound-dai = <&pdm>; }; simple-audio-card,codec { sound-dai = <&pdmics>; }; }; reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; drm_logo: drm-logo@00000000 { compatible = "rockchip,drm-logo"; reg = <0x0 0x0 0x0 0x0>; }; drm_cubic_lut: drm-cubic-lut@00000000 { compatible = "rockchip,drm-cubic-lut"; reg = <0x0 0x0 0x0 0x0>; }; ramoops: ramoops@110000 { compatible = "ramoops"; /* 0x110000 to 0x1f0000 is for ramoops */ reg = <0x0 0x110000 0x0 0xe0000>; boot-log-size = <0x8000>; /* do not change */ boot-log-count = <0x1>; /* do not change */ console-size = <0x80000>; pmsg-size = <0x30000>; ftrace-size = <0x00000>; record-size = <0x14000>; }; }; vcc5v0_usb_host1: vcc5v0-usb-host1 { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb_host1"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; pinctrl-names = "default"; pinctrl-0 = <&usb_host1_pwren>; }; vcc5v0_usb_host2: vcc5v0-usb-host2 { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb_host2"; regulator-boot-on; regulator-always-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; vin-supply = <&vcc5v0_sys>; pinctrl-names = "default"; pinctrl-0 = <&usb_host2_pwren>; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h &clkm1_32k_out>; reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; }; wireless_wlan: wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "rtl8852bs"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; WIFI,host_wake_irq = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>; status = "okay"; }; leds { compatible = "gpio-leds"; led_green: led-0 { color = ; function = LED_FUNCTION_STATUS; linux,default-trigger = "heartbeat"; gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; }; led_red: led-1 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; }; }; fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; pwms = <&pwm6 0 50000 0>; cooling-levels = <0 50 100 150 200 255>; rockchip,temp-trips = < 50000 1 55000 2 60000 3 65000 4 70000 5 >; }; }; &avsd { status = "okay"; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &crypto { status = "okay"; }; &dfi { status = "okay"; }; &display_subsystem { status = "okay"; }; &dmc { center-supply = <&vdd_logic>; status = "okay"; }; &gpu { mali-supply = <&vdd_logic>; status = "okay"; }; &gpu_bus { bus-supply = <&vdd_logic>; status = "okay"; }; &hdmi { status = "okay"; }; &hdmi_in_vp0 { status = "okay"; }; &hdmiphy { status = "okay"; }; &iep { status = "okay"; }; &iep_mmu { status = "okay"; }; &jpegd { status = "okay"; }; &jpegd_mmu { status = "okay"; }; &mpp_srv { status = "okay"; }; &rga2 { status = "okay"; }; &rga2_mmu { status = "okay"; }; &rkvdec { status = "okay"; }; &rkvdec_mmu { status = "okay"; }; &rkvenc { status = "okay"; }; &rkvenc_mmu { status = "okay"; }; &rkvtunnel { status = "okay"; }; &rockchip_suspend { // status = "okay"; // rockchip,sleep-debug-en = <1>; // rockchip,virtual-poweroff = <1>; // rockchip,sleep-mode-config = < // (0 // | RKPM_SLP_ARMPD // ) // >; // rockchip,wakeup-config = < // (0 // | RKPM_CPU0_WKUP_EN // | RKPM_GPIO_WKUP_EN // ) // >; // rockchip,pwm-regulator-config = < // (0 // | RKPM_PWM0_M0_REGULATOR_EN // | RKPM_PWM1_M0_REGULATOR_EN // ) // >; }; &sai3 { status = "okay"; }; &saradc { status = "okay"; vref-supply = <&vdd_1v8_s3>; }; &sdhci { bus-width = <8>; no-sd; no-sdio; non-removable; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; max-frequency = <200000000>; status = "okay"; }; &sai2 { status = "okay"; }; &sdio0 { max-frequency = <200000000>; no-sd; no-mmc; supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; non-removable; mmc-pwrseq = <&sdio_pwrseq>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; status = "okay"; }; &sfc { status = "okay"; }; &spdif_8ch { status = "disabled"; }; &tsadc { status = "okay"; }; &tve { status = "disabled"; }; &tve_in_vp1 { status = "disabled"; }; &uart2 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart2m1_xfer &uart2m1_ctsn &uart2m1_rtsn>; uart-has-rtscts; bluetooth { compatible = "brcm,bcm43438-bt"; device-wakeup-gpios = <&gpio3 RK_PC3 0>; host-wakeup-gpios = <&gpio1 RK_PC2 0>; shutdown-gpios = <&gpio1 RK_PC1 0>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; vbat-supply = <&vcc_3v3_s3>; vddio-supply = <&vdd_1v8_s3>; }; }; &gmac1 { /* Use rgmii-rxid mode to disable rx delay inside Soc */ phy-mode = "rgmii-rxid"; clock_in_out = "output"; snps,reset-gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; tx_delay = <0x30>; /* rx_delay = <0x3f>; */ pinctrl-names = "default"; pinctrl-0 = <&rgmii_miim &rgmii_tx_bus2 &rgmii_rx_bus2 &rgmii_rgmii_clk &rgmii_rgmii_bus ð_pins>; phy-handle = <&rgmii_phy>; status = "okay"; }; &mdio1 { rgmii_phy: phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x1>; }; }; &combphy_pu { status = "okay"; }; &pcie2x1 { reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>; status = "okay"; }; &i2c0 { status = "okay"; hym8563: hym8563@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; interrupt-parent = <&gpio4>; interrupts = ; }; }; &pinctrl { bt { bt_enable: bt-enable { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake: bt-host-wake { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_wake: bt-wake { rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; hym8563 { hym8563_int: hym8563-int { rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { usb_host1_pwren: usb-host1-pwren { rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; usb_host2_pwren: usb-host2-pwren { rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { led_rgb_r: led-red-en { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; led_rgb_g: led-green-en { rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm0 { status = "okay"; }; &pwm1 { status = "okay"; }; &pwm2 { status = "okay"; }; &pwm3 { status = "okay"; }; &pwm6 { status = "okay"; pinctrl-0 = <&pwm6m2_pins>; }; &acodec { status = "okay"; }; &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; rockchip,default-sample-phase = <90>; supports-sd; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; vqmmc-supply = <&vccio_sd>; vmmc-supply = <&vcc_sd>; status = "okay"; }; &usb2phy { status = "okay"; }; &u2phy_host { status = "okay"; phy-supply = <&vcc5v0_sys>; }; &u2phy_otg { status = "okay"; vbus-supply = <&vcc5v0_sys>; }; &usbdrd30 { status = "okay"; }; &usbdrd_dwc3 { // Only USB2.0 START extcon = <&usb2phy>; phys = <&u2phy_otg>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; // Only USB2.0 END snps,usb2-lpm-disable; status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &display_subsystem { memory-region = <&drm_logo>, <&drm_cubic_lut>; memory-region-names = "drm-logo", "drm-cubic-lut"; /* devfreq = <&dmc>; */ route { route_hdmi: route-hdmi { status = "okay"; logo,uboot = "logo.bmp"; logo,kernel = "logo_kernel.bmp"; logo,mode = "center"; charge_logo,mode = "center"; connect = <&vp0_out_hdmi>; }; route_tve: route-tve { status = "okay"; logo,uboot = "logo.bmp"; logo,kernel = "logo_kernel.bmp"; logo,mode = "center"; charge_logo,mode = "center"; connect = <&vp1_out_tve>; }; }; }; &rng { status = "okay"; }; &vdpp { status = "okay"; }; &vdpu { status = "okay"; }; &vdpu_mmu { status = "okay"; }; &vop { status = "okay"; }; &vop_mmu { status = "okay"; }; /* watchdog */ &wdt { status = "okay"; };