// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2023 Rockchip Electronics Co., Ltd.
 * Copyright (c) 2023 Radxa Limited
 *
 */

/dts-v1/;

#include "rk3588s-radxa-cm5.dtsi"

/ {
	model = "Radxa CM5 RPI CM4 IO";
	compatible = "radxa,cm5-rpi-cm4-io", "rockchip,rk3588";

	/delete-node/ chosen;

	vcc12v_dcin: vcc12v-dcin {
		compatible = "regulator-fixed";
		regulator-name = "vcc12v_dcin";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc5v0_sys: vcc5v0-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc5v0_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v1_nldo_s3";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1100000>;
		vin-supply = <&vcc5v0_sys>;
	};

	usb20_reset: usb-up-regulator {
		compatible = "regulator-fixed";
		enable-active-low;
		gpio = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&usb20_reset_pin>;
		regulator-name = "usb20_reset";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	hdmi0_sound: hdmi0-sound {
		status = "okay";
		compatible = "rockchip,hdmi";
		rockchip,mclk-fs = <128>;
		rockchip,card-name = "rockchip-hdmi0";
		rockchip,cpu = <&i2s5_8ch>;
		rockchip,codec = <&hdmi0>;
		rockchip,jack-det;
	};

	vcc3v3_sys: vcc3v3-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vcc12v_dcin>;
	};

	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0 {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_pcie2x1l0";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		enable-active-high;
		regulator-boot-on;
		regulator-always-on;
		gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <50000>;
		vin-supply = <&vcc5v0_sys>;
	};
};

&gpio_leds {
	activity-led-green {
		gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "heartbeat";
		default-state = "on";
	};

	pwr-led-red {
		gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "default-on";
	};
};

&sdhci {
	status = "okay";
};

&hdmi0 {
	status = "okay";
};

&hdmi0_in_vp0 {
	status = "okay";
};

&route_hdmi0 {
	status = "okay";
};

&hdptxphy_hdmi0 {
	status = "okay";
};

&i2s5_8ch {
	status = "okay";
};

&vop {
	status = "okay";
};

&vop_mmu {
	status = "okay";
};

&vp0 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER0 | 1 << ROCKCHIP_VOP2_ESMART0)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER0>;
	cursor-win-id = <ROCKCHIP_VOP2_ESMART0>;
};

&vp1 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER1 | 1 << ROCKCHIP_VOP2_ESMART1)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER1>;
	cursor-win-id = <ROCKCHIP_VOP2_ESMART1>;
};

&vp2 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER2 | 1 << ROCKCHIP_VOP2_ESMART2)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER2>;
	cursor-win-id = <ROCKCHIP_VOP2_ESMART2>;
};

&vp3 {
	rockchip,plane-mask = <(1 << ROCKCHIP_VOP2_CLUSTER3 | 1 << ROCKCHIP_VOP2_ESMART3)>;
	rockchip,primary-plane = <ROCKCHIP_VOP2_CLUSTER3>;
	cursor-win-id = <ROCKCHIP_VOP2_ESMART3>;
};

&display_subsystem {
	clocks = <&hdptxphy_hdmi0>;
	clock-names = "hdmi0_phy_pll";
};

&hdptxphy_hdmi0 {
	status = "okay";
};

&i2c7 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c7m2_xfer>;

	emc2301: emc2301@2f {
		status = "okay";
		compatible = "microchip,emc2301";
		reg = <0x2f>;
		#address-cells = <1>;
		#size-cells = <0>;
		#cooling-cells = <2>;
		microchip,pwm-separate;
		microchip,cooling-levels = <10>;
		channel@0 {
			reg = <0>;
			pwm-min = <0>;
		};
	};

	pcf85063: pcf85063@51 {
		compatible = "nxp,pcf85063";
		status = "okay";
		reg = <0x51>;
		quartz-load-femtofarads = <12500>;
	};
};

&threshold {
	temperature = <60000>;
};

&soc_thermal {
	cooling-maps {
		sustainable-power = <5000>; /* milliwatts */
		map3 {
			trip = <&target>;
			cooling-device =
				<&emc2301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
			contribution = <8192>;
		};
		map4 {
			trip = <&threshold>;
			cooling-device =
				<&emc2301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
			contribution = <8192>;
		};
	};
};

&pinctrl {

	usb {
		usb20_reset_pin: usb20-reset {
			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&pcie2x1l2 {
	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
	status = "okay";
};

&combphy0_ps {
	status = "okay";
};

&u2phy0 {
	status = "okay";
};

&u2phy0_otg {
	status = "okay";
};

&usbdp_phy0 {
	status = "okay";
};

&usbdp_phy0_u3 {
	status = "okay";
};

&usbdrd3_0 {
	status = "okay";
};

&usbdrd_dwc3_0 {
	dr_mode = "otg";
	extcon = <&u2phy0>;
	status = "okay";
};

&sdmmc {
	max-frequency = <200000000>;
	supports-sd;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	sd-uhs-sdr104;
	vmmc-supply = <&vcc_3v3_s3>;
	vqmmc-supply = <&vccio_sd_s0>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd>;
	status = "okay";
};

/* Fix the issue of board howling */
&vdd_cpu_big0_s0 {
	regulator-initial-mode = <1>;
};

&vdd_cpu_big1_s0 {
	regulator-initial-mode = <1>;
};

&vdd_npu_s0 {
	regulator-initial-mode = <1>;
};

&vdd_gpu_s0 {
	regulator-initial-mode = <1>;
};

&vdd_cpu_lit_s0 {
	regulator-initial-mode = <1>;
};

&vdd_log_s0 {
	regulator-initial-mode = <1>;
};

&vdd_vdenc_s0 {
	regulator-initial-mode = <1>;
};

&vdd_ddr_s0 {
	regulator-initial-mode = <1>;
};

&vdd2_ddr_s3 {
	regulator-initial-mode = <1>;
};

&vcc_2v0_pldo_s3 {
	regulator-initial-mode = <1>;
};

&vcc_3v3_s3 {
	regulator-initial-mode = <1>;
};

&vddq_ddr_s0 {
	regulator-initial-mode = <1>;
};

&vcc_1v8_s3 {
	regulator-initial-mode = <1>;
};

&gpio0 {
	gpio-line-names =
		/* GPIO0_A0-A3 */
		"", "", "", "",
		/* GPIO0_A4-A7 */
		"", "", "", "",

		/* GPIO0_B0-B3 */
		"", "", "", "",
		/* GPIO0_B4-B7 */
		"", "PIN_8", "PIN_10", "",

		/* GPIO0_C0-C3 */
		"", "", "", "",
		/* GPIO0_C4-C7 */
		"", "", "", "PIN_5",

		/* GPIO0_D0-D3 */
		"PIN_3", "", "", "",
		/* GPIO0_D4-D7 */
		"", "", "", "";
};

&gpio1 {
	gpio-line-names =
		/* GPIO1_A0-A3 */
		"", "PIN_38", "PIN_40", "PIN_12",
		/* GPIO1_A4-A7 */
		"PIN_36", "", "PIN_18", "PIN_16",

		/* GPIO1_B0-B3 */
		"PIN_22", "PIN_21", "PIN_19", "PIN_23",
		/* GPIO1_B4-B7 */
		"PIN_24", "PIN_26", "", "",

		/* GPIO1_C0-C3 */
		"", "", "PIN_11", "PIN_15",
		/* GPIO1_C4-C7 */
		"", "PIN_13", "", "PIN_29",

		/* GPIO1_D0-D3 */
		"", "", "", "",
		/* GPIO1_D4-D7 */
		"PIN_7", "", "PIN_28", "PIN_27";
};

&gpio2 {
	gpio-line-names =
		/* GPIO2_A0-A3 */
		"", "", "", "",
		/* GPIO2_A4-A7 */
		"", "", "", "",

		/* GPIO2_B0-B3 */
		"", "", "", "",
		/* GPIO2_B4-B7 */
		"", "", "", "",

		/* GPIO2_C0-C3 */
		"", "", "", "",
		/* GPIO2_C4-C7 */
		"", "", "", "",

		/* GPIO2_D0-D3 */
		"", "", "", "",
		/* GPIO2_D4-D7 */
		"", "", "", "";
};

&gpio3 {
	gpio-line-names =
		/* GPIO3_A0-A3 */
		"", "", "", "",
		/* GPIO3_A4-A7 */
		"", "", "", "",

		/* GPIO3_B0-B3 */
		"", "", "", "",
		/* GPIO3_B4-B7 */
		"", "", "", "",

		/* GPIO3_C0-C3 */
		"", "", "", "",
		/* GPIO3_C4-C7 */
		"", "", "", "",

		/* GPIO3_D0-D3 */
		"PIN_37", "", "", "",
		/* GPIO3_D4-D7 */
		"", "", "", "";
};

&gpio4 {
	gpio-line-names =
		/* GPIO4_A0-A3 */
		"", "PIN_33", "PIN_31", "",
		/* GPIO4_A4-A7 */
		"", "", "", "",

		/* GPIO4_B0-B3 */
		"", "", "PIN_32", "",
		/* GPIO4_B4-B7 */
		"", "", "", "",

		/* GPIO4_C0-C3 */
		"", "", "", "",
		/* GPIO4_C4-C7 */
		"", "", "", "",

		/* GPIO4_D0-D3 */
		"", "", "", "",
		/* GPIO4_D4-D7 */
		"", "", "", "";
};