// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
 *
 */

/dts-v1/;

#include <dt-bindings/display/drm_mipi_dsi.h>
#include <dt-bindings/display/rockchip_vop.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/rk-input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sensor-dev.h>
#include <dt-bindings/usb/pd.h>
#include "rk3576.dtsi"
#include "rk3576-android.dtsi"
#include "rk3576-eink.dtsi"

/ {
	model = "Rockchip RK3576 EBOOK X3 V10 Board";
	compatible = "rockchip,rk3576-ebook-x3-v10", "rockchip,rk3576";

	aw882xx_sound: aw882xx-sound {
		status = "okay";
		compatible = "rockchip,multicodecs-card";
		rockchip,card-name = "rockchip,aw882xx";
		rockchip,mclk-fs = <256>;
		rockchip,cpu = <&sai1>;
		rockchip,codec = <&aw882xx_smartpa_0>, <&aw882xx_smartpa_1>;
	};

	bat: battery {
		compatible = "simple-battery";
		//charge-full-design-microamp-hours = <9800000>;
		charge-full-design-microamp-hours = <4200000>;
		precharge-current-microamp = <100000>;
		precharge-upper-limit-microvolt = <3600000>;
		charge-term-current-microamp = <100000>;
		constant-charge-current-max-microamp = <4000000>;/* 4A */
		constant-charge-voltage-max-microvolt = <4350000>;
		factory-internal-resistance-micro-ohms = <30>;
		voltage-max-design-microvolt = <4350000>;
		voltage-min-design-microvolt = <3000000>;
	};

	bt_sco: bt-sco {
		status = "okay";
		compatible = "delta,dfbmcs320";
		#sound-dai-cells = <1>;
	};

	bt_sound: bt-sound {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,format = "dsp_a";
		simple-audio-card,bitclock-inversion;
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,name = "rockchip,bt";
		simple-audio-card,cpu {
			sound-dai = <&sai2>;
		};
		simple-audio-card,codec {
			sound-dai = <&bt_sco 1>;
		};
	};

	charge-animation {
		compatible = "rockchip,uboot-charge";
		rockchip,uboot-charge-on = <1>;
		rockchip,android-charge-on = <0>;
		rockchip,uboot-low-power-voltage = <3450>;
		rockchip,screen-on-voltage = <3500>;
		rockchip,uboot-exit-charge-level = <2>;
		rockchip,uboot-exit-charge-voltage = <3500>;
		rockchip,uboot-exit-charge-auto = <1>;
		status = "okay";
	};

	charger-manager {
		compatible = "rockchip-charger-manager";
		cm-name = "battery";
		cm-poll-mode = <2>;
		cm-poll-interval = <5000>;
		cm-cp-support-mult-mode = <1>;
		//cm-chargers = "sgm4154x-charger";
		cm-chargers = "sc89890-charger";
		cm-chargers-phandle = <&usbc0>;
		cm-fuel-gauge = "cw221X-bat";
		monitored-battery = <&bat>;
		extcon = <&u2phy0>;
		cm-jeita-temp-charge-table = <0 15 420000 4350000>,
			<15 45 4000000 4400000>,
			<45 60 1400000 4200000>;
	};

	hall_sensor: hall-mh248 {
		compatible = "hall-mh248";
		pinctrl-names = "default";
		pinctrl-0 = <&mh248_irq_gpio>;
		irq-gpio = <&gpio0 RK_PB5 IRQ_TYPE_EDGE_BOTH>;
		hall-active = <1>;
		status = "okay";

		//for ebook ultra sleep config
		pmu-gpio-regs-base = <0x27320000>; //gpio0 base
		pmu-gpio-regs-size = <0x200>; //gpio0 register size
		pmu-gpio-int-reg = <0x50>; //gpio int status register
		pmu-gpio-rtc-int-mask = <0x01>; //GPIO0_A0, rtc int
		pmu-gpio-pmic-int-mask = <0x40>; //GPIO0_A6, pmic int
	};

	leds: gpio-leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 =<&leds_gpio>;

		led@1 {
			gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "cw221X-bat-full";
			label = "battery_full";
			retain-state-suspended;
			default-state = "on";
		};

		led@2 {
			gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "cw221X-bat-charging";
			label = "battery_charging";
			retain-state-suspended;
			default-state = "off";
		};
	};

	pdm_codec: dummy-codec {
		status = "okay";
		compatible = "rockchip,dummy-codec";
		#sound-dai-cells = <0>;
	};

	pdm_mic_array: pdm-mic-array {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,name = "rockchip,pdm-mic-array";
		simple-audio-card,cpu {
			sound-dai = <&pdm1>;
		};
		simple-audio-card,codec {
			sound-dai = <&pdm_codec>;
		};
	};

	vcc_sys: vcc-sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3800000>;
		regulator-max-microvolt = <3800000>;
	};

	vcc_2v0_pldo_s3: vcc-2v0-pldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_2v0_pldo_s3";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <2000000>;
		regulator-max-microvolt = <2000000>;
		vin-supply = <&vcc_sys>;
	};

	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v1_nldo_s3";
		regulator-boot-on;
		regulator-always-on;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1100000>;
		vin-supply = <&vcc_sys>;
	};

	vcc_emr: vcc-emr {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc_emr_en>;
		regulator-name = "vcc_emr";
		regulator-boot-on;
		startup-delay-us = <10000>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	vcc_tp: vcc-tp {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&vcc_tp_en>;
		regulator-name = "vcc_tp";
		regulator-boot-on;
		startup-delay-us = <10000>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	wireless_bluetooth: wireless-bluetooth {
		compatible = "bluetooth-platdata";
		clocks = <&hym8563>;
		clock-names = "ext_clock";
		uart_rts_gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default", "rts_gpio";
		pinctrl-0 = <&uart4m1_rtsn>;
		pinctrl-1 = <&uart4_gpios>;
		BT,reset_gpio    = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
		BT,wake_gpio     = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
		BT,wake_host_irq = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};

	wireless_wlan: wireless-wlan {
		compatible = "wlan-platdata";
		wifi_chip_type = "ap6275p";
		pinctrl-names = "default";
		pinctrl-0 = <&wifi_host_wake_irq>;
		WIFI,host_wake_irq = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
		WIFI,poweren_gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};
};

&bus_a72 {
	bus-supply = <&vdd_logic_s0>;
	pvtm-supply = <&vdd_logic_s0>;
	status = "okay";
};

&combphy0_ps {
	status = "okay";
};

&cpu_l0 {
	cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_b0 {
	cpu-supply = <&vdd_cpu_big_s0>;
};

&dp {
	status = "disabled";
};

&dp0_in_vp1 {
	status = "disabled";
};

&ebc_dev {
	pmic = <&sy7636a>;
	status = "okay";

	/* ES107KC1 */
	panel,width = <1920>;
	panel,height = <2560>;
	panel,vir_width = <1920>;
	panel,vir_height = <2560>;
	panel,sdck = <60000000>;
	panel,lsl = <18>;
	panel,lbl = <18>;
	panel,ldl = <480>;
	panel,lel = <27>;
	panel,gdck-sta = <1>;
	panel,lgonl = <354>;
	panel,fsl = <1>;
	panel,fbl = <4>;
	panel,fdl = <1280>;
	panel,fel = <15>;
	panel,mirror = <0>;
	panel,panel_16bit = <1>;
	panel,panel_color = <0>;
	panel,width-mm = <162>;
	panel,height-mm = <216>;
	panel,disable_logo = <0>;
	panel,rearrange = <1>;
};

&gpu {
	mali-supply = <&vdd_gpu_s0>;
	status = "okay";
};

&i2c3 {
	status = "okay";
	pinctrl-names = "default";

	aw882xx_smartpa_0: aw882xx@34 {
		compatible = "awinic,aw882xx_smartpa";
		#sound-dai-cells = <0>;
		reg = <0x34>;
		/* reset-gpio = <&pio 89 0x0>; */
		/* irq-gpio = <&pio 37 0x0>; */
		sound-channel = <0>; /*0:pri_l 1:pri_r 2:sec_l 3:sec_r*/
		monitor-mode = "hal_momitor";
		aw-re-min = <4000>;
		aw-re-max= <30000>;
		/*aw-cali-mode = "none";*/
		status = "okay";
	};

	aw882xx_smartpa_1: aw882xx@35 {
		compatible = "awinic,aw882xx_smartpa";
		#sound-dai-cells = <0>;
		reg = <0x35>;
		/* reset-gpio = <&pio 17 0x0>; */
		/* irq-gpio = <&pio 19 0x0>; */
		sound-channel = <1>; /*0:pri_l 1:pri_r 2:sec_l 3:sec_r*/
		monitor-mode = "hal_momitor";
		aw-re-min = <4000>;
		aw-re-max= <30000>;
		/*aw-cali-mode = "none";*/
		status = "okay";
	};
};

&i2c5 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c5m2_xfer>;

	wacom: wacom@9 {
		compatible = "wacom,w9013";
		reg = <0x09>;
		pwr-supply = <&vcc_emr>;
		pinctrl-names = "default";
		pinctrl-0 = <&wacom_gpio>;
		gpio_detect = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
		gpio_intr = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
		gpio_rst = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
		revert_x = <0>;
		revert_y = <0>;
		xy_exchange = <0>;
	};
};

&i2c6 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c6m3_xfer>;

	cw221X@64 {
		compatible = "cellwise,cw221X";
		reg = <0x64>;
		cw,user_rsense = <10000>;
		status = "okay";
	};

	hym8563: hym8563@51 {
		compatible = "haoyu,hym8563";
		reg = <0x51>;
		#clock-cells = <0>;
		clock-frequency = <32768>;
		clock-output-names = "hym8563";
		pinctrl-names = "default";
		pinctrl-0 = <&rtc_int>;

		interrupt-parent = <&gpio0>;
		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
		wakeup-source;
		status = "okay";
	};

	sc89890: sc89890@6a {
		compatible = "sc,sc89890";
		reg = <0x6a>;
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&charger_ok>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD2 IRQ_TYPE_EDGE_FALLING>; /* IRQ_TYPE_LEVEL_LOW>;*/
		sc,battery-regulation-voltage = <4350000>; /* 4.4V */
		sc,charge-current = <4000000>; /* 4.0A */
		sc,termination-current = <100000>;  /* 100mA */
		sc,precharge-current = <500000>; /* 130mA */
		sc,minimum-sys-voltage = <3400000>; /* 3V */
		sc,boost-voltage = <5000000>; /* 5V */
		sc,boost-max-current = <1600000>; /* 1600mA */

		sc,thermal-regulation-threshold = <4000000>;

		sc,ibatcomp-clamp-microvolt = <100000>;
		sc,ibatcomp-micro-ohms = <20>;
		monitored-battery = <&bat>;
		regulators {
			otg-en-pin = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
			vbus5v0_typec: vbus5v0-typec {
				regulator-compatible = "otg-vbus";
				regulator-name = "vbus5v0_typec";
			};
		};
	};

	usbc0: fusb302@22 {
		compatible = "fcs,fusb302";
		reg = <0x22>;
		interrupt-parent = <&gpio0>;
		interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
		int-n-gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&usbc0_int>;
		vbus-supply = <&vbus5v0_typec>;
		status = "okay";

		port {
			usbc0_role_sw: endpoint {
				remote-endpoint = <&usb_drd0_role_switch>;
			};
		};

		usb_con: connector {
			compatible = "usb-c-connector";
			label = "USB-C";
			data-role = "dual";
			power-role = "dual";
			try-power-role = "sink";
			op-sink-microwatt = <1000000>;
			sink-pdos =
				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
				 PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
				/* PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM) */>;
			source-pdos =
				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			altmodes {
				#address-cells = <1>;
				#size-cells = <0>;

				altmode@0 {
					reg = <0>;
					svid = <0xff01>;
					vdo = <0xffffffff>;
				};
			};

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					usbc0_orien_sw: endpoint {
						remote-endpoint = <&usbdp_phy_orientation_switch>;
					};
				};

				port@1 {
					reg = <1>;
					dp_altmode_mux: endpoint {
						remote-endpoint = <&usbdp_phy_dp_altmode_mux>;
					};
				};
			};

		};
	};
};

&i2c7 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c7m2_xfer>;

	sy7636a: sy7636a@62 {
		compatible = "silergy,sy7636a-pmic";
		reg = <0x62>;
		status = "okay";

		pinctrl-names = "default";
		pinctrl-0 = <&sy7636a_default>;

		enable-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>, <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;

		thermal-zone = "ebcpmic-thermal";
		#thermal-sensor-cells = <0>;

		regulators {
			compatible = "sy7636a-regulator";
			reg_ebcpmic: vcom {
				regulator-name = "vcom";
				regulator-min-microvolt = <0>;
				regulator-max-microvolt = <5000000>;
				regulator-boot-on;
				regulator-state-mem {
					regulator-off-in-suspend;
				};
			};
		};

		sy7636a_thermal: sy7636a_thermal {
			compatible = "sy7636a-thermal";
		};
	};
};

&i2c9 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&i2c9m2_xfer>;

	cyttsp5@24 {
		status = "okay";
		compatible = "cy,cyttsp5_i2c_adapter";
		reg = <0x24>;
		cy,adapter_id = "cyttsp5_i2c_adapter";
		pinctrl-names = "default";
		pinctrl-0 = <&cyttsp5_gpio>;
		cytp-supply = <&vcc_tp>;
		cy,core {
			cy,name = "cyttsp5_core";
			cy,irq_gpio =  <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
			cy,rst_gpio =  <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>;
			cy,hid_desc_register = <1>;
			/* CY_CORE_FLAG_RESTORE_PARAMETERS */
			cy,flags = <6>;
			/* CY_CORE_EWG_NONE */
			cy,easy_wakeup_gesture = <0>;
			cy,btn_keys = <172 /* KEY_HOMEPAGE */
						/* previously was KEY_HOME, new Android versions use KEY_HOMEPAGE */
						139 /* KEY_MENU */
						158 /* KEY_BACK */
						217 /* KEY_SEARCH */
						114 /* KEY_VOLUMEDOWN */
						115 /* KEY_VOLUMEUP */
						212 /* KEY_CAMERA */
						116>; /* KEY_POWER */
			cy,btn_keys-tag = <0>;
			cy,mt {
				cy,name = "cyttsp5_mt";
				cy,inp_dev_name = "cyttsp5_mt";
				cy,flags = <0xA8>;
				cy,abs =
					/* ABS_MT_POSITION_X, CY_ABS_MIN_X, CY_ABS_MAX_X, 0, 0 */
					<0x35 0 1920 0 0
					/* ABS_MT_POSITION_Y, CY_ABS_MIN_Y, CY_ABS_MAX_Y, 0, 0 */
					0x36 0 2700 0 0
					/* ABS_MT_PRESSURE, CY_ABS_MIN_P, CY_ABS_MAX_P, 0, 0 */
					0x3a 0 255 0 0
					/* CY_IGNORE_VALUE, CY_ABS_MIN_W, CY_ABS_MAX_W, 0, 0 */
					0xffff 0 255 0 0
					/* ABS_MT_TRACKING_ID, CY_ABS_MIN_T, CY_ABS_MAX_T, 0, 0 */
					0x39 0 15 0 0
					/* ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0 */
					0x30 0 255 0 0
					/* ABS_MT_TOUCH_MINOR, 0, 255, 0, 0 */
					0x31 0 255 0 0
					/* ABS_MT_ORIENTATION, -127, 127, 0, 0 */
					0x34 0xffffff81 127 0 0
					/* ABS_MT_TOOL_TYPE, 0, MT_TOOL_MAX, 0, 0 */
					0x37 0 1 0 0
					/* ABS_DISTANCE, 0, 255, 0, 0 */
					0x19 0 255 0 0>;

					cy,vkeys_x = <1920>;
					cy,vkeys_y = <2700>;
					cy,max_x = <1920>;
					cy,max_y = <2560>;
					cy,revert_x = <0>;
					cy,revert_y = <1>;
					cy,xy_exchange = <0>;

					cy,virtual_keys =
						/* KeyCode CenterX CenterY Width Height */
						/* KEY_BACK */
						<158 1360 90 160 180
						/* KEY_MENU */
						139 1360 270 160 180
						/* KEY_HOMEPAGE */
						172 1360 450 160 180
						/* KEY SEARCH */
						217 1360 630 160 180>;
			};

			cy,btn {
				cy,name = "cyttsp5_btn";
				cy,inp_dev_name = "cyttsp5_btn";
			};

			cy,proximity {
				cy,name = "cyttsp5_proximity";
				cy,inp_dev_name = "cyttsp5_proximity";
				cy,abs =
				/* ABS_DISTANCE, CY_PROXIMITY_MIN_VAL, CY_PROXIMITY_MAX_VAL, 0, 0 */
					<0x19 0 1 0 0>;
			};
		};
	};
};

&iep {
	status = "okay";
};

&iep_mmu {
	status = "okay";
};

&jpegd {
	status = "okay";
};

&jpege {
	status = "okay";
};

&jpeg_mmu {
	status = "okay";
};

&mipidcphy0 {
	status = "okay";
};

&mpp_srv {
	status = "okay";
};

&pcie0 {
	reset-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
	rockchip,skip-scan-in-resume;
	rockchip,s2r-perst-inactive-ms = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&wifi_poweren_gpio>;
	status = "okay";
};

&pdm1 {
	status = "okay";
	pinctrl-names = "default", "idle", "clk";
	pinctrl-0 = <&pdm1m1_sdi0
		     &pdm1m1_sdi1
		     &pdm1m1_sdi2
		     &pdm1m1_sdi3>;
	pinctrl-1 = <&pdm1m1_clk0_idle
		     &pdm1m1_clk1_idle>;
	pinctrl-2 = <&pdm1m1_clk0
		     &pdm1m1_clk1>;
};

&pinctrl {
	charger {
		charger_ok: charger_ok {
			rockchip,pins =
					<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
					<2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	hall {
		mh248_irq_gpio: mh248-irq-gpio {
			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	led {
		leds_gpio: leds-gpio {
			rockchip,pins =
					<2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
					<2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	rtc {
		rtc_int: rtc-int {
			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	sy7636a {
		sy7636a_default: sy7636a_default {
			rockchip,pins =
					/* EBC_PMIC_ON */
					<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
					/* PMIC_PWR_ON */
					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	touch {
		cyttsp5_gpio: cyttsp5-gpio {
			rockchip,pins =
					<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>,
					<0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		vcc_tp_en: vcc-tp-en {
			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	touch-pen {
		wacom_gpio: wacom-gpio {
			rockchip,pins =
					<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,
					<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
					<0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
		};

		vcc_emr_en: vcc-emr-en {
			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb {
		usbc0_int: usbc0-int {
			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	wireless-bluetooth {
		uart4_gpios: uart4-gpios {
			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	wireless-wlan {
		wifi_host_wake_irq: wifi-host-wake-irq {
			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
		};

		wifi_poweren_gpio: wifi-poweren-gpio {
			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};
};

&rga2_core0 {
	status = "okay";
};

&rga2_core0_mmu {
	status = "okay";
};

&rga2_core1 {
	status = "okay";
};

&rga2_core1_mmu {
	status = "okay";
};

&rknpu {
	rknpu-supply = <&vdd_npu_s0>;
	status = "okay";
};

&rknpu_mmu {
	status = "okay";
};

&rkvenc_ccu {
	status = "okay";
};

&rkvenc0 {
	status = "okay";
};

&rkvenc0_mmu {
	status = "okay";
};

&rkvenc1 {
	status = "okay";
};

&rkvenc1_mmu {
	status = "okay";

};

&rkvdec {
	status = "okay";
};

&rkvdec_mmu {
	status = "okay";
};

&sai1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&sai1m0_lrck
		     &sai1m0_sclk
		     &sai1m0_sdo0>;
};

&sai2 {
	status = "okay";
};

&sdhci {
	bus-width = <8>;
	no-sdio;
	no-sd;
	non-removable;
	max-frequency = <200000000>;
	mmc-hs400-1_8v;
	mmc-hs400-enhanced-strobe;
	full-pwr-cycle-in-suspend;
	status = "okay";
};

&sdmmc {
	max-frequency = <150000000>;
	no-sdio;
	no-mmc;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	disable-wp;
	sd-uhs-sdr104;
	vqmmc-supply = <&vccio_sd_s0>;
	status = "okay";
};

&thermal_zones {
	ebcpmic_thermal: ebcpmic-thermal {
		polling-delay = <0>;
		polling-delay-passive = <0>;
		thermal-sensors = <&sy7636a>;

		trips {
			sy7636a_dummy_trip: sy7636a-dummy-trip {
				temperature = <100000>;
				hysteresis = <0>;
				type = "hot";
			};
		};
	};
};

&tsadc {
	status = "okay";
};

&uart4 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn>;
};

&u2phy0 {
	status = "okay";
};

&u2phy0_otg {
	status = "okay";
	rockchip,typec-vbus-det;
};

&u2phy1 {
	status = "disabled";
};

&u2phy1_otg {
	status = "disabled";
};

&usbdp_phy {
	status = "okay";
	orientation-switch;
	svid = <0xff01>;
	sbu1-dc-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
	sbu2-dc-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;

	port {
		#address-cells = <1>;
		#size-cells = <0>;

		usbdp_phy_orientation_switch: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&usbc0_orien_sw>;
		};

		usbdp_phy_dp_altmode_mux: endpoint@1 {
			reg = <1>;
			remote-endpoint = <&dp_altmode_mux>;
		};
	};
};

&usbdp_phy_dp {
	status = "okay";
};

&usbdp_phy_u3 {
	status = "okay";
};

&usb_drd0_dwc3 {
	status = "okay";
	dr_mode = "otg";
	usb-role-switch;
	port {
		usb_drd0_role_switch: endpoint {
			remote-endpoint = <&usbc0_role_sw>;
		};
	};
};

&usb_drd1_dwc3 {
	status = "disabled";
};

&vdpp {
	status = "okay";
};