// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2020 Rockchip Electronics Co., Ltd. * */ /dts-v1/; #include #include #include #include #include #include #include #include #include #include "rk3566.dtsi" #include "rk3568-linux.dtsi" / { model = "Firefly RK3566-ROC-PC HDMI(Linux)"; compatible = "rockchip,rk3566-firefly-roc-pc", "rockchip,rk3566"; audiopwmout_diff: audiopwmout-diff { status = "disabled"; compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,name = "rockchip,audiopwmout-diff"; simple-audio-card,mclk-fs = <256>; simple-audio-card,bitclock-master = <&master>; simple-audio-card,frame-master = <&master>; simple-audio-card,cpu { sound-dai = <&i2s3_2ch>; }; master: simple-audio-card,codec { sound-dai = <&dig_acodec>; }; }; dc_12v: dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; hdmi_sound: hdmi-sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <128>; simple-audio-card,name = "rockchip,hdmi"; status = "disabled"; simple-audio-card,cpu { sound-dai = <&i2s0_8ch>; }; simple-audio-card,codec { sound-dai = <&hdmi>; }; }; rk_headset: rk-headset { status = "disabled"; compatible = "rockchip_headset"; headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&hp_det>; }; pdmics: dummy-codec { status = "disabled"; compatible = "rockchip,dummy-codec"; #sound-dai-cells = <0>; }; pdm_mic_array: pdm-mic-array { status = "disabled"; compatible = "simple-audio-card"; simple-audio-card,name = "rockchip,pdm-mic-array"; simple-audio-card,cpu { sound-dai = <&pdm>; }; simple-audio-card,codec { sound-dai = <&pdmics>; }; }; rk809_sound: rk809-sound { status = "okay"; compatible = "rockchip,multicodecs-card"; rockchip,card-name = "rockchip-rk809"; //hp-det-gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; rockchip,format = "i2s"; rockchip,mclk-fs = <256>; rockchip,cpu = <&i2s1_8ch>; rockchip,codec = <&rk809_codec>; // pinctrl-names = "default"; // pinctrl-0 = <&hp_det>; }; spdif-sound { status = "okay"; compatible = "simple-audio-card"; simple-audio-card,name = "ROCKCHIP,SPDIF"; simple-audio-card,cpu { sound-dai = <&spdif_8ch>; }; simple-audio-card,codec { sound-dai = <&spdif_out>; }; }; spdif_out: spdif-out { status = "okay"; compatible = "linux,spdif-dit"; #sound-dai-cells = <0>; }; vad_sound: vad-sound { status = "disabled"; compatible = "rockchip,multicodecs-card"; rockchip,card-name = "rockchip,rk3568-vad"; rockchip,cpu = <&i2s1_8ch>; rockchip,codec = <&rk809_codec>, <&vad>; }; vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_vbus_en>; regulator-name = "vcc5v0_host"; regulator-always-on; regulator-boot-on; }; vcc5v0_otg: vcc5v0-otg-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_otg_en>; regulator-name = "vcc5v0_otg"; }; vcc3v3_lcd0_n: vcc3v3-lcd0-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd0_n"; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_lcd1_n: vcc3v3-lcd1-n { compatible = "regulator-fixed"; regulator-name = "vcc3v3_lcd1_n"; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; adc_keys: adc-keys { compatible = "adc-keys"; io-channels = <&saradc 0>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; recovery-key { label = "F12"; linux,code = ; press-threshold-microvolt = <1750>; }; vol-down-key { label = "volume down"; linux,code = ; press-threshold-microvolt = <297500>; }; menu-key { label = "menu"; linux,code = ; press-threshold-microvolt = <980000>; }; back-key { label = "back"; linux,code = ; press-threshold-microvolt = <1305500>; }; }; vcc2v5_sys: vcc2v5-ddr { compatible = "regulator-fixed"; regulator-name = "vcc2v5-sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; vin-supply = <&vcc3v3_sys>; }; vcc3v3_vga: vcc3v3-vga { compatible = "regulator-fixed"; regulator-name = "vcc3v3_vga"; regulator-always-on; regulator-boot-on; gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vcc3v3_sys>; }; pcie30_avdd0v9: pcie30-avdd0v9 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd0v9"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; vin-supply = <&vcc3v3_sys>; }; pcie30_avdd1v8: pcie30-avdd1v8 { compatible = "regulator-fixed"; regulator-name = "pcie30_avdd1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; }; pcie30_3v3: gpio-regulator { compatible = "regulator-gpio"; regulator-name = "pcie30_3v3"; regulator-min-microvolt = <100000>; regulator-max-microvolt = <3300000>; gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; states = <100000 0x0 3300000 0x1>; }; vcc3v3_bu: vcc3v3-bu { compatible = "regulator-fixed"; regulator-name = "vcc3v3_bu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk809 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h>; /* * On the module itself this is one of these (depending * on the actual card populated): * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ post-power-on-delay-ms = <200>; reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; status = "okay"; }; wireless_wlan: wireless-wlan { compatible = "wlan-platdata"; rockchip,grf = <&grf>; wifi_chip_type = "ap6356s"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_irq>; WIFI,host_wake_irq = <&gpio2 RK_PB2 0>; status = "okay"; }; wireless_bluetooth: wireless-bluetooth { compatible = "bluetooth-platdata"; clocks = <&rk809 1>; clock-names = "ext_clock"; //wifi-bt-power-toggle; uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "rts_gpio"; pinctrl-0 = <&uart1m0_rtsn &bt_host_wake_gpio &bt_poweren &bt_host_wake_irq>; pinctrl-1 = <&uart1_rts_gpio>; BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; status = "okay"; }; flash_led: flash-led { compatible = "led,rgb13h"; label = "pwm-flash-led"; led-max-microamp = <20000>; flash-max-microamp = <20000>; flash-max-timeout-us = <1000000>; pwms = <&pwm11 0 25000 0>; rockchip,camera-module-index = <1>; rockchip,camera-module-facing = "front"; status = "disabled"; }; vcc_camera: vcc-camera-regulator { compatible = "regulator-fixed"; //gpio = <&pca9555 0 GPIO_ACTIVE_HIGH>; gpio = <&pca9555 3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc_cam>; regulator-name = "vcc_camera"; enable-active-high; status = "disabled"; }; sd_vcc3v3_power: sd-vcc3v3-power { status = "disabled"; compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sd_vcc3v3_power_en>; regulator-name = "sd_vcc3v3_power_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; firefly_leds: leds { compatible = "gpio-leds"; power_led: power { label = "firefly:blue:power"; linux,default-trigger = "ir-power-click"; default-state = "on"; gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_power>; }; user_led: user { label = "firefly:yellow:user"; linux,default-trigger = "ir-user-click"; default-state = "off"; gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&led_user>; }; }; test-power { status = "okay"; }; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &dfi { status = "okay"; }; &dmc { center-supply = <&vdd_logic>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { status = "okay"; }; &hdmi_in_vp0 { status = "okay"; }; &hdmi_in_vp1 { status = "disabled"; }; &hdmi_sound { status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: tcs4525@1c { compatible = "tcs,tcs452x"; reg = <0x1c>; vin-supply = <&vcc5v0_sys>; regulator-compatible = "fan53555-reg"; regulator-name = "vdd_cpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1390000>; regulator-ramp-delay = <2300>; fcs,suspend-voltage-selector = <1>; regulator-boot-on; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "pmic-sleep", "pmic-power-off", "pmic-reset"; pinctrl-0 = <&pmic_int>; pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; //fb-inner-reg-idxs = <2>; /* 1: rst regs (default in codes), 0: rst the pmic */ pmic-reset-func = <0>; /* not save the PMIC_POWER_EN register in uboot */ not-save-power-en = <1>; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; pwrkey { status = "okay"; }; pinctrl_rk8xx: pinctrl_rk8xx { gpio-controller; #gpio-cells = <2>; rk817_slppin_null: rk817_slppin_null { pins = "gpio_slp"; function = "pin_fun0"; }; rk817_slppin_slp: rk817_slppin_slp { pins = "gpio_slp"; function = "pin_fun1"; }; rk817_slppin_pwrdn: rk817_slppin_pwrdn { pins = "gpio_slp"; function = "pin_fun2"; }; rk817_slppin_rst: rk817_slppin_rst { pins = "gpio_slp"; function = "pin_fun3"; }; }; regulators { vdd_logic: DCDC_REG1 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_logic"; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_gpu"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-name = "vcc_ddr"; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-init-microvolt = <900000>; regulator-ramp-delay = <6001>; regulator-initial-mode = <0x2>; regulator-name = "vdd_npu"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-boot-on; regulator-always-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda_0v9"; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-name = "vdda0v9_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_acodec"; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc3v3_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_pmu"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcca1v8_image"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-name = "vcc_1v8"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-always-on; regulator-boot-on; regulator-name = "vcc_3v3"; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_sd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; regulator-name = "vcc3v3_sd"; regulator-state-mem { regulator-off-in-suspend; }; }; }; rk809_codec: codec { #sound-dai-cells = <0>; compatible = "rockchip,rk809-codec", "rockchip,rk817-codec"; clocks = <&cru I2S1_MCLKOUT>; clock-names = "mclk"; assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>; assigned-clock-rates = <12288000>; assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>; pinctrl-names = "default","spk_gpio"; pinctrl-0 = <&i2s1m0_mclk>; pinctrl-1 = <&spk_ctl_gpio>; hp-volume = <20>; spk-volume = <3>; mic-in-differential; capture-volume = <0>; io-channels = <&saradc 4>; hp-det-adc-value = <1000>; spk-ctl-gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; }; &i2s0_8ch { status = "okay"; }; &i2s1_8ch { status = "okay"; rockchip,clk-trcm = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; }; &iep { status = "okay"; }; &iep_mmu { status = "okay"; }; &jpegd { status = "okay"; }; &jpegd_mmu { status = "okay"; }; &mpp_srv { status = "okay"; }; &nandc0 { #address-cells = <1>; #size-cells = <0>; status = "okay"; nand@0 { reg = <0>; nand-bus-width = <8>; nand-ecc-mode = "hw"; nand-ecc-strength = <16>; nand-ecc-step-size = <1024>; }; }; &pmu_io_domains { status = "okay"; pmuio1-supply = <&vcc3v3_pmu>; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; }; &pwm4 { status = "okay"; }; &pwm5 { status = "okay"; }; &rk_rga { status = "okay"; }; &rkvdec { status = "okay"; }; &rkvdec_mmu { status = "okay"; }; &rkvenc { venc-supply = <&vdd_logic>; status = "okay"; }; &rkvenc_mmu { status = "okay"; }; &rknpu { rknpu-supply = <&vdd_npu>; status = "okay"; }; &rknpu_mmu { status = "okay"; }; &bus_npu { bus-supply = <&vdd_logic>; pvtm-supply = <&vdd_cpu>; status = "okay"; }; &saradc { status = "okay"; vref-supply = <&vcca_1v8>; }; &sdhci { bus-width = <8>; no-sdio; no-sd; non-removable; max-frequency = <200000000>; full-pwr-cycle-in-suspend; status = "okay"; }; &sdmmc0 { max-frequency = <150000000>; no-sdio; no-mmc; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; sd-uhs-sdr104; //vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; status = "okay"; }; &spdif_8ch { status = "okay"; }; &tsadc { status = "okay"; }; &u2phy0_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy0_otg { status = "okay"; }; &u2phy1_host { phy-supply = <&vcc5v0_host>; status = "okay"; }; &u2phy1_otg { phy-supply = <&vcc5v0_host>; status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy1 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd_dwc3 { dr_mode = "otg"; extcon = <&usb2phy0>; status = "okay"; }; &usbdrd30 { status = "okay"; }; &usbhost_dwc3 { status = "okay"; }; &usbhost30 { status = "okay"; }; &vad { rockchip,audio-src = <&i2s1_8ch>; rockchip,buffer-time-ms = <128>; rockchip,det-channel = <0>; rockchip,mode = <0>; }; &vdpu { status = "okay"; }; &vdpu_mmu { status = "okay"; }; &vepu { status = "okay"; }; &vepu_mmu { status = "okay"; }; &vop { status = "okay"; assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; }; &vop_mmu { status = "okay"; }; &pinctrl { pmic { pmic_int: pmic_int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; soc_slppin_gpio: soc_slppin_gpio { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>; }; soc_slppin_slp: soc_slppin_slp { rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; }; soc_slppin_rst: soc_slppin_rst { rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; }; spk_ctl_gpio: spk_ctl_gpio { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; cam { vcc_cam: vcc-cam { rockchip,pins = /* camera power en */ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; headphone { hp_det: hp-det { rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; touch { touch_gpio: touch-gpio { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; mxc6655xa { mxc6655xa_irq_gpio: mxc6655xa_irq_gpio { rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { vcc5v0_otg_en: vcc5v0-otg-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_host_vbus_en: vcc5v0-host-en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sd { sd_vcc3v3_power_en: sd-vcc3v3-power-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-wlan { wifi_host_wake_irq: wifi-host-wake-irq { rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>; }; }; wireless-bluetooth { uart1_rts_gpio: uart1-rts-gpio { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_irq: bt-host-wake-irq { rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_host_wake_gpio: bt-host-wake-gpio { rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; }; bt_poweren: bt-poweren { rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; }; }; pcie { pcie_reset_gpio: pcie-reset-gpio { rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; leds { led_power: led-power { rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; led_user: led-user { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &combphy1_usq { status = "okay"; }; &combphy2_psq { status = "okay"; }; &csi2_dphy_hw { status = "okay"; }; &csi2_dphy0 { status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; mipi_in_ucam0: endpoint@1 { reg = <1>; remote-endpoint = <&ucam_out0>; data-lanes = <1 2 3 4>; }; mipi_in_ucam1: endpoint@2 { reg = <2>; remote-endpoint = <&gc8034_out>; data-lanes = <1 2 3 4>; }; mipi_in_ucam2: endpoint@3 { reg = <3>; remote-endpoint = <&ov5695_out>; data-lanes = <1 2>; }; }; port@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; csidphy_out: endpoint@0 { reg = <0>; remote-endpoint = <&isp0_in>; }; }; }; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "input"; snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus &gmac1m1_clkinout>; tx_delay = <0x4f>; rx_delay = <0x26>; phy-handle = <&rgmii_phy1>; status = "disabled"; }; /* * power-supply should switche to vcc3v3_lcd1_n * when mipi panel is connected to dsi1. */ &i2c4 { status = "okay"; gc8034: gc8034@37 { compatible = "galaxycore,gc8034"; status = "disabled"; reg = <0x37>; clocks = <&cru CLK_CIF_OUT>; clock-names = "xvclk"; pinctrl-names = "default"; pinctrl-0 = <&cif_clk>; reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>; rockchip,grf = <&grf>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "RK-CMK-8M-2-v1"; rockchip,camera-module-lens-name = "CK8401"; port { gc8034_out: endpoint { remote-endpoint = <&mipi_in_ucam1>; data-lanes = <1 2 3 4>; }; }; }; os04a10: os04a10@36 { status = "disabled"; compatible = "ovti,os04a10"; reg = <0x36>; clocks = <&cru CLK_CIF_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cif_clk>; reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "CMK-OT1607-FV1"; rockchip,camera-module-lens-name = "M12-40IRC-4MP-F16"; port { ucam_out0: endpoint { remote-endpoint = <&mipi_in_ucam0>; data-lanes = <1 2 3 4>; }; }; }; ov5695: ov5695@36 { status = "disabled"; compatible = "ovti,ov5695"; reg = <0x36>; clocks = <&cru CLK_CIF_OUT>; clock-names = "xvclk"; power-domains = <&power RK3568_PD_VI>; pinctrl-names = "default"; pinctrl-0 = <&cif_clk>; reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; rockchip,camera-module-index = <0>; rockchip,camera-module-facing = "back"; rockchip,camera-module-name = "TongJu"; rockchip,camera-module-lens-name = "CHT842-MD"; port { ov5695_out: endpoint { remote-endpoint = <&mipi_in_ucam2>; data-lanes = <1 2>; }; }; }; }; &i2c1 { status = "disabled"; clock-frequency = <100000>; pca9555: gpio@21 { status = "disabled"; compatible = "nxp,pca9555"; reg = <0x21>; gpio-controller; #gpio-cells = <2>; gpio-group-num = <200>; }; gt1x: gt1x@14 { status = "disabled"; compatible = "goodix,gt1x"; reg = <0x14>; pinctrl-names = "default"; pinctrl-0 = <&touch_gpio>; goodix,rst-gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; goodix,irq-gpio = <&gpio0 RK_PB5 IRQ_TYPE_LEVEL_LOW>; }; }; &i2c5 { status = "disabled"; mc3230: mc3230sensor@4c { compatible = "gs_mc3230"; reg = <0x4c>; type = ; irq_enable = <0>; poll_delay_ms = <30>; layout = <4>; status = "disabled"; }; mxc6655xa: mxc6655xa@15 { status = "disabled"; compatible = "gs_mxc6655xa"; pinctrl-names = "default"; pinctrl-0 = <&mxc6655xa_irq_gpio>; reg = <0x15>; irq-gpio = <&gpio3 RK_PC1 IRQ_TYPE_LEVEL_LOW>; irq_enable = <0>; poll_delay_ms = <30>; type = ; power-off-in-suspend = <1>; layout = <1>; }; }; &mdio1 { rgmii_phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; }; &rk809_codec { pinctrl-0 = <&i2s1m0_mclk>; }; &rkisp { status = "okay"; }; &rkisp_mmu { status = "okay"; }; &rkisp_vir0 { status = "okay"; port { #address-cells = <1>; #size-cells = <0>; isp0_in: endpoint@0 { reg = <0>; remote-endpoint = <&csidphy_out>; }; }; }; &sata2 { status = "disabled"; }; &sdmmc2 { max-frequency = <150000000>; no-sd; no-mmc; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; sd-uhs-sdr104; mmc-pwrseq = <&sdio_pwrseq>; non-removable; status = "disabled"; }; &spdif_8ch { status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&spdifm1_tx>; }; &uart3 { status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&uart3m1_xfer>; }; &uart4 { status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&uart4m1_xfer>; }; &uart8 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>; }; &can1 { status = "disabled"; compatible = "rockchip,rk3568-can-2.0"; assigned-clocks = <&cru CLK_CAN1>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&can1m1_pins>; }; &can2 { status = "disabled"; compatible = "rockchip,rk3568-can-2.0"; assigned-clocks = <&cru CLK_CAN2>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&can2m0_pins>; }; &spi1 { status = "disabled"; max-freq = <48000000>; dev-port = <0>; pinctrl-0 = <&spi1m1_pins>; pinctrl-1 = <&spi1m1_pins_hs>; spi_wk2xxx: spi_wk2xxx@0{ status = "disabled"; compatible = "firefly,spi-wk2xxx"; reg = <0x00>; spi-max-frequency = <10000000>; power-gpio = <&pca9555 15 GPIO_ACTIVE_HIGH>; reset-gpio = <&pca9555 9 GPIO_ACTIVE_HIGH>; irq-gpio = <&gpio0 RK_PA6 IRQ_TYPE_EDGE_FALLING>; cs-gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; /* rk3399 driver support SPI_CPOL | SPI_CPHA | SPI_CS_HIGH */ //spi-cpha; /* SPI mode: CPHA=1 */ //spi-cpol; /* SPI mode: CPOL=1 */ //spi-cs-high; }; }; &pwm7 { status = "disabled"; compatible = "rockchip,remotectl-pwm"; interrupts = ; remote_pwm_id = <3>; handle_cpu_id = <1>; remote_support_psci = <0>; pinctrl-names = "default"; pinctrl-0 = <&pwm7_pins>; ir_key_firefly{ rockchip,usercode = <0xff00>; rockchip,key_table = <0xeb KEY_POWER>, <0xec KEY_MENU>, <0xfe KEY_BACK>, <0xb7 KEY_HOME>, <0xa3 KEY_WWW>, <0xf4 KEY_VOLUMEUP>, <0xa7 KEY_VOLUMEDOWN>, <0xf8 KEY_REPLY>, <0xfc KEY_UP>, <0xfd KEY_DOWN>, <0xf1 KEY_LEFT>, <0xe5 KEY_RIGHT>; }; }; &sfc{ pinctrl-names = "default"; pinctrl-0 = <&fspi_pins>; assigned-clock-rates = <50000000>; status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; spi-rx-bus-width = <1>; spi-tx-bus-width = <1>; }; }; &lpddr4_params { /* freq info, freq_0 is final frequency, unit: MHz */ freq_0 = <1056>; }; &lpddr4x_params { /* freq info, freq_0 is final frequency, unit: MHz */ freq_0 = <1056>; }; &power { pd_pipe@RK3568_PD_PIPE { reg = ; clocks = <&cru PCLK_PIPE>; pm_qos = <&qos_pcie2x1>, <&qos_sata1>, <&qos_sata2>, <&qos_usb3_0>, <&qos_usb3_1>; }; }; &rkisp { rockchip,iq-feature = /bits/ 64 <0x1BFBF7FE67FF>; }; &usbdrd_dwc3 { phys = <&u2phy0_otg>; phy-names = "usb2-phy"; extcon = <&usb2phy0>; maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; snps,usb2-lpm-disable; }; &vcc5v0_otg { status = "disabled"; }; /* WiFi config */ &sdmmc1 { max-frequency = <150000000>; supports-sdio; bus-width = <4>; disable-wp; cap-sd-highspeed; cap-sdio-irq; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; sd-uhs-sdr104; rockchip,default-sample-phase = <90>; status = "okay"; }; // iomux with GPIO2_B2(WIFI,host_wake_irq) &uart8 { status = "disabled"; }; /* BT config */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; status = "okay"; }; &rk809_codec { io-channels = <&saradc 3>; hp-det-adc-value = <941>; hp_adc_drift_scope = <20>; board-spk-from-hp; }; &pcie2x1 { reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie_reset_gpio>; vpcie3v3-supply = <&pcie30_3v3>; status = "okay"; }; &pcie30_3v3 { status = "okay"; gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; &its { status = "okay"; }; &pwm7 { status = "okay"; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "input"; snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m0_miim &gmac1m0_tx_bus2 &gmac1m0_rx_bus2 &gmac1m0_rgmii_clk &gmac1m0_rgmii_bus &gmac1m0_clkinout>; tx_delay = <0x4e>; rx_delay = <0x2c>; phy-handle = <&rgmii_phy1>; status = "okay"; }; &rgmii_phy1 { led_status_value = <0x2f60>; }; &i2c2 { status = "okay"; }; &csi2_dphy0{ status="disabled"; }; &csi2_dphy2{ status = "disabled"; }; &csi2_dphy1 { status = "disabled"; /* * dphy1 only used for split mode, * can be used concurrently with dphy2 * full mode and split mode are mutually exclusive */ }; &rk809 { rtc { status = "disabled"; }; }; &route_hdmi { status = "okay"; connect = <&vp0_out_hdmi>; };