// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
 */

/dts-v1/;
#include "rv1126.dtsi"
#include "rv1126-ipc.dtsi"
#include <dt-bindings/input/input.h>

/ {
	model = "Rockchip RV1126 38x38 V10 EMMC DDR3 Board";
	compatible = "rockchip,rv1126-38x38-v10-emmc", "rockchip,rv1126";

	chosen {
		bootargs = "earlycon=uart8250,mmio32,0xff570000 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=squashfs rootwait snd_aloop.index=7";
	};

	/delete-node/ vdd-npu;
	/delete-node/ vdd-vepu;

	vcc_1v8: vcc-1v8 {
		compatible = "regulator-fixed";
		regulator-name = "vcc_1v8";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
	};

	vcc_dvdd: vcc-dvdd {
		compatible = "regulator-fixed";
		regulator-name = "vcc_dvdd";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <1200000>;
		regulator-max-microvolt = <1200000>;
	};

	vcc3v3_sys: vcc33sys {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_sys";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	vcc_sd: vcc-sd {
		compatible = "regulator-fixed";
		gpio = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&sdmmc_pwr>;
		pinctrl-names = "default";
		regulator-name = "vcc_sd";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		vin-supply = <&vcc3v3_sys>;
		enable-active-high;
	};

	vdd_arm: vdd-arm {
		compatible = "pwm-regulator";
		pwms = <&pwm0 0 5000 1>;
		regulator-name = "vdd_arm";
		regulator-min-microvolt = <720000>;
		regulator-max-microvolt = <1000000>;
		regulator-init-microvolt = <825000>;
		regulator-always-on;
		regulator-boot-on;
		regulator-settling-time-up-us = <250>;
		pwm-supply = <&vcc3v3_sys>;
		status = "okay";
	};

	/*
	 * pwm1 is reserved as voltage adjustment in hardware
	 * use fixed regulator to avoid voltage adjustment by software
	 */
	vdd_logic_npu_vepu: vdd-logic-npu-vepu {
		compatible = "pwm-regulator";
		pwms = <&pwm1 0 5000 1>;
		regulator-name = "vdd_logic_npu_vepu";
		regulator-min-microvolt = <720000>;
		regulator-max-microvolt = <880000>;
		regulator-init-microvolt = <825000>;
		regulator-always-on;
		regulator-boot-on;
		regulator-settling-time-up-us = <250>;
		pwm-supply = <&vcc3v3_sys>;
		status = "okay";
	};

	vdd_logic_npu_vepu_fixed: vdd-logic-npu-vepu-fixed {
		compatible = "regulator-fixed";
		regulator-name = "vdd_logic_npu_vepu-fixed";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <825000>;
		regulator-max-microvolt = <825000>;
	};

	adc-keys {
		compatible = "adc-keys";
		io-channels = <&saradc 0>;
		io-channel-names = "buttons";
		poll-interval = <100>;
		keyup-threshold-microvolt = <1800000>;

		esc-key {
			label = "esc";
			linux,code = <KEY_ESC>;
			press-threshold-microvolt = <0>;
		};
	};

	cam_ircut0: cam_ircut {
		status = "okay";
		compatible = "rockchip,ircut";
		ircut-open-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
		ircut-close-gpios  = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
		rockchip,camera-module-index = <1>;
		rockchip,camera-module-facing = "front";
	};

	flash_ir: flash-ir {
		status = "okay";
		compatible = "led,rgb13h";
		label = "pwm-flash-ir";
		led-max-microamp = <20000>;
		flash-max-microamp = <20000>;
		flash-max-timeout-us = <1000000>;
		pwms=<&pwm3 0 25000 0>;
		rockchip,camera-module-index = <1>;
		rockchip,camera-module-facing = "front";
	};

	i2s0_sound: i2s0-sound {
		status = "okay";
		compatible = "simple-audio-card";
		simple-audio-card,format = "i2s";
		simple-audio-card,mclk-fs = <256>;
		simple-audio-card,name = "rockchip,i2s0-sound";
		simple-audio-card,cpu {
			sound-dai = <&i2s0_8ch>;
		};
		simple-audio-card,codec {
			sound-dai = <&es8311>;
		};
	};

	wireless_wlan: wireless-wlan {
		compatible = "wlan-platdata";
		rockchip,grf = <&grf>;
		wifi_chip_type = "USB-WiFi";
		WIFI,poweren_gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
		status = "okay";
	};
};

&csi_dphy0 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_in_ucam0: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&ucam_out0>;
				data-lanes = <1 2 3 4>;
			};
		};
		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			csidphy0_out: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&mipi_csi2_input>;
			};
		};
	};
};

&emmc {
	bus-width = <8>;
	cap-mmc-highspeed;
	non-removable;
	mmc-hs200-1_8v;
	rockchip,default-sample-phase = <90>;
	no-sdio;
	no-sd;
	/delete-property/ pinctrl-names;
	/delete-property/ pinctrl-0;
	status = "okay";
};

&gmac {
	phy-mode = "rmii";
	clock_in_out = "output";

	snps,reset-gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_LOW>;
	snps,reset-active-low;
	snps,reset-delays-us = <0 50000 10000>;

	assigned-clocks = <&cru CLK_GMAC_SRC_M0>, <&cru CLK_GMAC_SRC>, <&cru CLK_GMAC_TX_RX>;
	assigned-clock-rates = <0>, <50000000>;
	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M0>, <&cru CLK_GMAC_SRC_M0>, <&cru RMII_MODE_CLK>;

	pinctrl-names = "default";
	pinctrl-0 = <&rmiim0_miim &rgmiim0_rxer &rmiim0_bus2 &rgmiim0_mclkinout>;

	phy-handle = <&phy>;
	status = "okay";
};

&i2c0 {
	status = "okay";

	pcf8563: pcf8563@51 {
		compatible = "pcf8563";
		reg = <0x51>;
		#clock-cells = <0>;
		clock-frequency = <32768>;
		clock-output-names = "xin32k";
	};
};

&i2c1 {
	status = "okay";
	clock-frequency = <400000>;

	imx415: imx415@1a {
		   compatible = "sony,imx415";
		   reg = <0x1a>;
		   clocks = <&cru CLK_MIPICSI_OUT>;
		   clock-names = "xvclk";
		   power-domains = <&power RV1126_PD_VI>;
		   pinctrl-names = "rockchip,camera_default";
		   pinctrl-0 = <&mipicsi_clk0>;
		   avdd-supply = <&vcc3v3_sys>;
		   dovdd-supply = <&vcc_1v8>;
		   dvdd-supply = <&vcc_dvdd>;
		   /* reset is always pulled high in v10 */
		   reset-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
		   rockchip,camera-module-index = <1>;
		   rockchip,camera-module-facing = "front";
		   rockchip,camera-module-name = "YT10092";
		   rockchip,camera-module-lens-name = "IR0147-50IRC-8M-F20";
		   ir-cut = <&cam_ircut0>;
		   flash-leds = <&flash_ir>;
		   port {
				   ucam_out0: endpoint {
						   remote-endpoint = <&mipi_in_ucam0>;
						   data-lanes = <1 2 3 4>;
				   };
		   };
	};

};

&i2c4 {
	status = "okay";
	clock-frequency = <400000>;
	pinctrl-0 = <&i2c4m1_xfer>;

	es8311: es8311@18 {
		compatible = "everest,es8311";
		reg = <0x18>;
		clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
		clock-names = "mclk";
		adc-volume = <0xbf>;  /* 0dB */
		dac-volume = <0xbf>;  /* 0dB */
		aec-mode = "dac left, adc right";
		pinctrl-names = "default";
		pinctrl-0 = <&i2s0m0_mclk &spk_ctl>;
		assigned-clocks = <&cru MCLK_I2S0_TX_OUT2IO>;
		assigned-clock-parents = <&cru MCLK_I2S0_TX>;
		spk-ctl-gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
		#sound-dai-cells = <0>;
	};
};

&i2s0_8ch {
	status = "okay";
	rockchip,trcm-sync-tx-only;
	#sound-dai-cells = <0>;
	pinctrl-0 = <&i2s0m0_sclk_tx
		     &i2s0m0_lrck_tx
		     &i2s0m0_sdi0
		     &i2s0m0_sdo0>;
};

&isp_reserved {
	size = <0x20000000>;
};

&mdio {
	phy: phy@1 {
		compatible = "ethernet-phy-ieee802.3-c22";
		reg = <0x1>;
	};
};

&mipi_csi2 {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_csi2_input: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&csidphy0_out>;
				data-lanes = <1 2 3 4>;
			};
		};

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			mipi_csi2_output: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&cif_mipi_in>;
				data-lanes = <1 2 3 4>;
			};
		};
	};
};

&npu {
	npu-supply = <&vdd_logic_npu_vepu_fixed>;
};

&npu_opp_table {
	/delete-node/ opp-800000000;
	/delete-node/ opp-934000000;
};

&pinctrl {
	es8311 {
		spk_ctl: spk-ctl {
			rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	sdmmc-pwr {
		/omit-if-no-ref/
		sdmmc_pwr: sdmmc-pwr {
			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};

&pmu_io_domains {
	status = "okay";

	pmuio0-supply = <&vcc3v3_sys>;
	pmuio1-supply = <&vcc3v3_sys>;
	vccio2-supply = <&vcc3v3_sys>;
	vccio3-supply = <&vcc3v3_sys>;
	vccio4-supply = <&vcc_1v8>;
	vccio5-supply = <&vcc3v3_sys>;
	vccio6-supply = <&vcc3v3_sys>;
	vccio7-supply = <&vcc3v3_sys>;
};

&pwm3 {
	status = "okay";
	pinctrl-names = "active";
	pinctrl-0 = <&pwm3m0_pins_pull_down>;
};

&rkcif {
	status = "okay";
};

&rkcif_mmu {
	status = "disabled";
};

&rkcif_mipi_lvds {
	status = "okay";

	port {
		/* MIPI CSI-2 endpoint */
		cif_mipi_in: endpoint {
			remote-endpoint = <&mipi_csi2_output>;
			data-lanes = <1 2 3 4>;
		};
	};
};

&rkcif_mipi_lvds_sditf {
	status = "okay";

	port {
		/* MIPI CSI-2 endpoint */
		mipi_lvds_sditf: endpoint {
			remote-endpoint = <&isp_in>;
			data-lanes = <1 2 3 4>;
		};
	};
};

&rkisp_vir0 {
	status = "okay";

	ports {
		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			isp_in: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&mipi_lvds_sditf>;
			};
		};
	};
};

&rkvenc {
	venc-supply = <&vdd_logic_npu_vepu_fixed>;
};

&rockchip_suspend {
	status = "okay";
	rockchip,sleep-debug-en = <1>;
	rockchip,sleep-mode-config = <
		(0
		| RKPM_SLP_ARMOFF
		| RKPM_SLP_PMU_PMUALIVE_32K
		| RKPM_SLP_PMU_DIS_OSC
		)
	>;
};

&saradc {
	status = "okay";
	vref-supply = <&vcc_1v8>;
};

&sdmmc0_bus4 {
	rockchip,pins =
		/* sdmmc0_d0 */
		<1 RK_PA4 1 &pcfg_pull_up_drv_level_0>,
		/* sdmmc0_d1 */
		<1 RK_PA5 1 &pcfg_pull_up_drv_level_0>,
		/* sdmmc0_d2 */
		<1 RK_PA6 1 &pcfg_pull_up_drv_level_0>,
		/* sdmmc0_d3 */
		<1 RK_PA7 1 &pcfg_pull_up_drv_level_0>;
};

&sdmmc0_clk {
	rockchip,pins =
		/* sdmmc0_clk */
		<1 RK_PB0 1 &pcfg_pull_up_drv_level_3>;
};

&sdmmc0_cmd {
	rockchip,pins =
		/* sdmmc0_cmd */
		<1 RK_PB1 1 &pcfg_pull_up_drv_level_0>;
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	card-detect-delay = <200>;
	rockchip,default-sample-phase = <90>;
	no-sdio;
	no-mmc;
	status = "okay";
	vmmc-supply = <&vcc_sd>;
};

&soc_crit {
	/* millicelsius */
	temperature = <125000>;
};

&u2phy1 {
	status = "okay";
	u2phy_host: host-port {
		status = "okay";
	};
};

&uart3 {
	wakeup-source;
	pinctrl-names = "default";
	pinctrl-0 = <&uart3m2_xfer &uart3m2_ctsn &uart3m2_rtsn>;
	status = "okay";
};

&usb_host0_ehci {
	status = "okay";
};

&usb_host0_ohci {
	status = "okay";
};

&wdt {
	status = "okay";
};