* Lontium lt7911uxc type-c/DP to MIPI-CSI Bridge

Required Properties:
- compatible: should be "lontium,lt7911uxc".
- clocks: reference to the 27M xvclk input clock.
- clock-names: should be "xvclk".
- reset-gpios: Low active reset gpio.
- power-gpios: High active power gpio.
- plugin-det-gpios: Low active plugin detect gpio.
- interrupts: GPIO connected to lt7911uxc gpio0.
- data-lanes: should be <1 2 3 4> for four-lane DPHY,
              or <1 2 3> for three-trios CPHY.

Optional Properties:
- bus-type: should be <1> if use CPHY.
            should be <4> or default config if use DPHY.

Attention:
LT7911UXC device address 0x43(7bit)

Example:
&i2c5 {
	status = "okay";

	lt7911uxc: lt7911uxc@43 {
		compatible = "lontium,lt7911uxc";
		status = "okay";
		reg = <0x43>;
		clocks = <&ext_cam_clk>;
		clock-names = "xvclk";
		interrupt-parent = <&gpio1>;
		interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>;
		power-domains = <&power RK3588_PD_VI>;
		reset-gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_LOW>;
		power-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
		plugin-det-gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
		rockchip,camera-module-index = <0>;
		rockchip,camera-module-facing = "back";
		rockchip,camera-module-name = "LT7911UXC";
		rockchip,camera-module-lens-name = "LT7911UXC";
		port {
			lt7911uxc_out: endpoint {
				remote-endpoint = <&dp_mipi_in1>;
				bus-type = <1>;
				data-lanes = <1 2 3>;
			};
		};
	};
};