67 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			67 lines
		
	
	
		
			1.8 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| Brutus is an evaluation platform for the SA1100 manufactured by Intel.  
 | |
| For more details, see:
 | |
| 
 | |
| http://developer.intel.com
 | |
| 
 | |
| To compile for Brutus, you must issue the following commands:
 | |
| 
 | |
| 	make brutus_config
 | |
| 	make config
 | |
| 	[accept all the defaults]
 | |
| 	make zImage
 | |
| 
 | |
| The resulting kernel will end up in linux/arch/arm/boot/zImage.  This file
 | |
| must be loaded at 0xc0008000 in Brutus's memory and execution started at
 | |
| 0xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon
 | |
| entry.
 | |
| 
 | |
| But prior to execute the kernel, a ramdisk image must also be loaded in
 | |
| memory.  Use memory address 0xd8000000 for this.  Note that the file 
 | |
| containing the (compressed) ramdisk image must not exceed 4 MB.
 | |
| 
 | |
| Typically, you'll need angelboot to load the kernel.
 | |
| The following angelboot.opt file should be used:
 | |
| 
 | |
| ----- begin angelboot.opt -----
 | |
| base 0xc0008000
 | |
| entry 0xc0008000
 | |
| r0 0x00000000
 | |
| r1 0x00000010
 | |
| device /dev/ttyS0
 | |
| options "9600 8N1"
 | |
| baud 115200
 | |
| otherfile ramdisk_img.gz
 | |
| otherbase 0xd8000000
 | |
| ----- end angelboot.opt -----
 | |
| 
 | |
| Then load the kernel and ramdisk with:
 | |
| 
 | |
| 	angelboot -f angelboot.opt zImage
 | |
| 
 | |
| The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your
 | |
| host PC) is used by angel to load the kernel and ramdisk image. The serial
 | |
| console is provided through the second Brutus serial port. To access it,
 | |
| you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow
 | |
| control.
 | |
| 
 | |
| Currently supported:
 | |
| 	- RS232 serial ports
 | |
| 	- audio output
 | |
| 	- LCD screen
 | |
| 	- keyboard
 | |
| 	
 | |
| The actual Brutus support may not be complete without extra patches. 
 | |
| If such patches exist, they should be found from 
 | |
| ftp.netwinder.org/users/n/nico.
 | |
| 
 | |
| A full PCMCIA support is still missing, although it's possible to hack
 | |
| some drivers in order to drive already inserted cards at boot time with
 | |
| little modifications.
 | |
| 
 | |
| Any contribution is welcome.
 | |
| 
 | |
| Please send patches to nico@fluxnic.net
 | |
| 
 | |
| Have Fun !
 | |
| 
 |